About the Team! Baker Hughes Flexible Pipeline Service (FPS) is the global leader in pipeline production, pre-commissioning, and maintenance services. Bringing cutting-edge physical and digital technologies together to create oilfield equipment is the beating heart of our work. Devising smarter systems that control and monitor oil and gas extraction, our subsea and flexible pipe capabilities are industry leading. Our team provides support for customers. About the Role! Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. Provide shift cover for holidays, sickness etc (often at short notice) Responsibilities:- Report directly to the Quality Control Supervisor, responding to a wide variety of Quality control related issues. Liaison with functional groups for all Quality Control related activities/problems. Interface with Customer/Third Party/certifying authority representatives, as required. Provide technical support/guidance to work centres for training process inspectors. Write and revise quality control procedures and related forms. Assist in failure analysis. Perform Receiving Inspection Completion of pipe maps. Administration/sign off/verification of inspections. Verify dimensional and inspection reports for product conformance. Assure identification and traceability of product and materials at all stages of manufacturing process! Write detailed reports as required. Generate Non-compliance reports (NCR •s) in accordance with applicable procedures. Random verification and audit of inspection activities and laboratory testing to support shift. Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples. Actively participate in Continuous Improvement initiatives Provide Technical support to work centres & projects on Quality Control requirements. Perform any other duties as directed by the Quality Control Supervisor. This position has no supervisory responsibilities. To be successful in this role you will: ONC/HNC from an accredited college, university, or trade school, or strong experience in Quality Control within a manufacturing environment in either or all the following industries: Extrusion, wire and cable, oil and gas or equivalent combination of education and experience. Pleasant personality with good interpersonal skills (articulate, confident, mature, and able to work as part of a team) Flexible attitude and proactive approach coupled with high quality customer service. Good common sense and the ability to use own initiative in prioritising workload. Ability to perform under pressure to deadlines without compromising standards. First class organisational skills with particular emphasis on time management and attention to detail Conscientious, hardworking and willing to perform additional duties to support the Quality team. A team player but someone who is equally comfortable working alone (self-motivated) Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. Ability to respond to common enquiries from management. Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. Competent on all process inspection activities. Requires working knowledge of Microsoft word, excel and outlook. Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. A valid Forklift license. About Us: We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward making it safer, cleaner and more efficient for people and the planet. Join Us: Permanent employment doesn't suit everyone. That's why we support flexible career opportunities. As a temporary contractor, you'll be a valued part of Baker Hughes extended workforce through our wide range of global opportunities. Whether you're looking to start a contracting career, or searching for your next project, you'll have the opportunity to work on a range of different initiatives, helping shape the future of our business and industry.
Dec 11, 2024
Contractor
About the Team! Baker Hughes Flexible Pipeline Service (FPS) is the global leader in pipeline production, pre-commissioning, and maintenance services. Bringing cutting-edge physical and digital technologies together to create oilfield equipment is the beating heart of our work. Devising smarter systems that control and monitor oil and gas extraction, our subsea and flexible pipe capabilities are industry leading. Our team provides support for customers. About the Role! Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. Provide shift cover for holidays, sickness etc (often at short notice) Responsibilities:- Report directly to the Quality Control Supervisor, responding to a wide variety of Quality control related issues. Liaison with functional groups for all Quality Control related activities/problems. Interface with Customer/Third Party/certifying authority representatives, as required. Provide technical support/guidance to work centres for training process inspectors. Write and revise quality control procedures and related forms. Assist in failure analysis. Perform Receiving Inspection Completion of pipe maps. Administration/sign off/verification of inspections. Verify dimensional and inspection reports for product conformance. Assure identification and traceability of product and materials at all stages of manufacturing process! Write detailed reports as required. Generate Non-compliance reports (NCR •s) in accordance with applicable procedures. Random verification and audit of inspection activities and laboratory testing to support shift. Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples. Actively participate in Continuous Improvement initiatives Provide Technical support to work centres & projects on Quality Control requirements. Perform any other duties as directed by the Quality Control Supervisor. This position has no supervisory responsibilities. To be successful in this role you will: ONC/HNC from an accredited college, university, or trade school, or strong experience in Quality Control within a manufacturing environment in either or all the following industries: Extrusion, wire and cable, oil and gas or equivalent combination of education and experience. Pleasant personality with good interpersonal skills (articulate, confident, mature, and able to work as part of a team) Flexible attitude and proactive approach coupled with high quality customer service. Good common sense and the ability to use own initiative in prioritising workload. Ability to perform under pressure to deadlines without compromising standards. First class organisational skills with particular emphasis on time management and attention to detail Conscientious, hardworking and willing to perform additional duties to support the Quality team. A team player but someone who is equally comfortable working alone (self-motivated) Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. Ability to respond to common enquiries from management. Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. Competent on all process inspection activities. Requires working knowledge of Microsoft word, excel and outlook. Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. A valid Forklift license. About Us: We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward making it safer, cleaner and more efficient for people and the planet. Join Us: Permanent employment doesn't suit everyone. That's why we support flexible career opportunities. As a temporary contractor, you'll be a valued part of Baker Hughes extended workforce through our wide range of global opportunities. Whether you're looking to start a contracting career, or searching for your next project, you'll have the opportunity to work on a range of different initiatives, helping shape the future of our business and industry.
About The Role We are looking for a experienced Multi Skilled Technician with a core trade in Carpentry/Plumbing with a passion to join our team of talented people. This role will be based in Plymouth and the surrounding area. Purpose of the role: You will provide a high quality fault fixing and maintenance service at multiple sites throughout our portfolio. You will be included in our out of hours service, ensuring the safety of our customers at all times. You will act as an ambassador for LiveWest. Experience/Qualifications: You will have a core trade in Carpentry/Plumbing achieved by either a formal qualification, or qualified by experience. You will have good general multi-skilled abilities. You will have a good level of literacy and numeracy. This is a full time opportunity although part time (minimum 30 hours per week) or job share may be available. For further information about this role, please click here to view our candidate information pack. We are committed to safeguarding and promoting the welfare of vulnerable groups, and expect all colleagues to share this commitment. Appointment to the post will be subject to a satisfactory basic check via the Disclosure and Barring Service. About The Candidate To be considered for the role of Multi Skilled Technician, you will: Be highly competent. Have a positive, can do attitude. Have exceptional customer service skills. Ideally have experience working in customers properties. Hold a full UK/EU driving licence. What we offer: Company vehicle and fuel card Power tools Full uniform and PPE Defined Contribution pension scheme - employer contribution of 6% - 9% Discretionary Bonus scheme 26 days annual leave plus bank holidays with service related increase to your entitlement up to 30 days plus an option to purchase extra annual leave Lifestyle discounts portal and internal supplier discounts offer great savings Health Cash Plan including dental and optical cover (worth up to £2,400 per annum) Death in Service benefit (3 x salary) Family Friendly policies Employee Assistance Programme Health and Wellbeing programme which includes enhanced sick pay, monthly campaigns, training and yearly flu jabs Cycle to Work scheme Car Benefit scheme Learning and Development including coaching and professional qualification support Volunteering days About The Company LiveWest provides over 38,000 homes to over 80,000 people throughout the South West from Gloucestershire to the Isles of Scilly. We have plans to build over 6,000 homes in the area over the next five years, developing new homes of all tenures including low-cost rent and sale, market rent and sale, and a range of supported housing and intermediate housing products, creating choice and flexibility. As well as developing new homes, we continue to invest in existing properties and communities. Through the stability of good housing, we place better living for better lives at the centre of our mission both today and for generations to come. At LiveWest we believe in a home for everyone. As an Inclusive Employer, we celebrate diversity and are committed to creating an inclusive environment for all colleagues. For further information about our Equality, Diversity and Inclusion policy, please click here.
Nov 15, 2022
Full time
About The Role We are looking for a experienced Multi Skilled Technician with a core trade in Carpentry/Plumbing with a passion to join our team of talented people. This role will be based in Plymouth and the surrounding area. Purpose of the role: You will provide a high quality fault fixing and maintenance service at multiple sites throughout our portfolio. You will be included in our out of hours service, ensuring the safety of our customers at all times. You will act as an ambassador for LiveWest. Experience/Qualifications: You will have a core trade in Carpentry/Plumbing achieved by either a formal qualification, or qualified by experience. You will have good general multi-skilled abilities. You will have a good level of literacy and numeracy. This is a full time opportunity although part time (minimum 30 hours per week) or job share may be available. For further information about this role, please click here to view our candidate information pack. We are committed to safeguarding and promoting the welfare of vulnerable groups, and expect all colleagues to share this commitment. Appointment to the post will be subject to a satisfactory basic check via the Disclosure and Barring Service. About The Candidate To be considered for the role of Multi Skilled Technician, you will: Be highly competent. Have a positive, can do attitude. Have exceptional customer service skills. Ideally have experience working in customers properties. Hold a full UK/EU driving licence. What we offer: Company vehicle and fuel card Power tools Full uniform and PPE Defined Contribution pension scheme - employer contribution of 6% - 9% Discretionary Bonus scheme 26 days annual leave plus bank holidays with service related increase to your entitlement up to 30 days plus an option to purchase extra annual leave Lifestyle discounts portal and internal supplier discounts offer great savings Health Cash Plan including dental and optical cover (worth up to £2,400 per annum) Death in Service benefit (3 x salary) Family Friendly policies Employee Assistance Programme Health and Wellbeing programme which includes enhanced sick pay, monthly campaigns, training and yearly flu jabs Cycle to Work scheme Car Benefit scheme Learning and Development including coaching and professional qualification support Volunteering days About The Company LiveWest provides over 38,000 homes to over 80,000 people throughout the South West from Gloucestershire to the Isles of Scilly. We have plans to build over 6,000 homes in the area over the next five years, developing new homes of all tenures including low-cost rent and sale, market rent and sale, and a range of supported housing and intermediate housing products, creating choice and flexibility. As well as developing new homes, we continue to invest in existing properties and communities. Through the stability of good housing, we place better living for better lives at the centre of our mission both today and for generations to come. At LiveWest we believe in a home for everyone. As an Inclusive Employer, we celebrate diversity and are committed to creating an inclusive environment for all colleagues. For further information about our Equality, Diversity and Inclusion policy, please click here.
As an Instrumentation Technician in the Engineering Trials Delivery Unit, you will have the opportunity to be involved in devising sensor application and data acquisition solutions to meet the customer's requirements for a diverse array of engineering trials. Additionally, you will be expected to undertake calibration, receipt, inspection of equipment, and routine maintenance activities to support operational trials. This is an excellent opportunity for a newly qualified apprentice or someone with experience in Control and Instrumentation looking to be involved in some important work at AWE, supporting our engineering trials. Location - Reading area Package - £21,700 - £28,000 (depending on your suitability and level of experience) AWE (one of the best 25 big companies to work for in the UK) offers an attractive array of benefits which include: Market leading contributory pension scheme Generous holiday entitlement (270 hours a year, including Bank Holidays, plus every other Friday off) Flexible working hours AWE Life Insurance Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Consideration for either full time or part time hours. Just let us know on your application if you wish to work part time What will you be responsible for? Assisting customers to define their instrumentation requirements Liaising with customers to ensure their requirements are met Designing, building, installing and testing of instrumentation systems Reporting on your projects Maintaining high levels of housekeeping within the Calibration Laboratory and Electrical Workshop environment Fault finding, problem solving, repair and maintenance of existing systems Work alongside team members on electrical hardware on a variety of voltage systems Undertake work in compliance with company processes, standards, and procedures May be required to carry out safety related roles including but not limited to Work Supervisory Skills; Nominated Person Electrical; COSHH Assessor; Manual Handling Assessor; Risk Assessor What will you need to be considered? Whilst not considered the checklist, candidates should have the following: Experience in using data capture hardware and software Knowledge of electronics or electrical test equipment Be able to show aptitude in fault-finding and problem solving Attention to detail and the ability to work safely in High Hazard areas are essential A willingness to learn with a good work ethic Strong communication skills (written and oral) Robust organisational and problem-solving skills Good working knowledge of MS programmes Training can be provided for candidates with some deficiencies in experience or knowledge. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Sep 22, 2022
Full time
As an Instrumentation Technician in the Engineering Trials Delivery Unit, you will have the opportunity to be involved in devising sensor application and data acquisition solutions to meet the customer's requirements for a diverse array of engineering trials. Additionally, you will be expected to undertake calibration, receipt, inspection of equipment, and routine maintenance activities to support operational trials. This is an excellent opportunity for a newly qualified apprentice or someone with experience in Control and Instrumentation looking to be involved in some important work at AWE, supporting our engineering trials. Location - Reading area Package - £21,700 - £28,000 (depending on your suitability and level of experience) AWE (one of the best 25 big companies to work for in the UK) offers an attractive array of benefits which include: Market leading contributory pension scheme Generous holiday entitlement (270 hours a year, including Bank Holidays, plus every other Friday off) Flexible working hours AWE Life Insurance Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Consideration for either full time or part time hours. Just let us know on your application if you wish to work part time What will you be responsible for? Assisting customers to define their instrumentation requirements Liaising with customers to ensure their requirements are met Designing, building, installing and testing of instrumentation systems Reporting on your projects Maintaining high levels of housekeeping within the Calibration Laboratory and Electrical Workshop environment Fault finding, problem solving, repair and maintenance of existing systems Work alongside team members on electrical hardware on a variety of voltage systems Undertake work in compliance with company processes, standards, and procedures May be required to carry out safety related roles including but not limited to Work Supervisory Skills; Nominated Person Electrical; COSHH Assessor; Manual Handling Assessor; Risk Assessor What will you need to be considered? Whilst not considered the checklist, candidates should have the following: Experience in using data capture hardware and software Knowledge of electronics or electrical test equipment Be able to show aptitude in fault-finding and problem solving Attention to detail and the ability to work safely in High Hazard areas are essential A willingness to learn with a good work ethic Strong communication skills (written and oral) Robust organisational and problem-solving skills Good working knowledge of MS programmes Training can be provided for candidates with some deficiencies in experience or knowledge. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Seniority Level: Associate Primary purpose and function of position: Reporting to the Technical Services First Line Manager, the role of a Utilities Operator Technician is a multi-skilled position. You will be responsible for maintaining and operating the boilers, refrigeration, air compressors, water treatment, waste water treatment, CO2 recovery, and the day to day running of all the utilities equipment and services. This job description and the job title Utilities Operator Technician is not necessarily descriptive of all duties and does not restrict flexibility. You may be required, from time to time, to carry out tasks in addition to or instead of your normal duties, either for the brewery or for AB InBev, provided that they are reasonable and within your capabilities. Principal Duties and Responsibilities: Working for the Technical Services Department you will work in a team consisting of multi skilled engineers. You be responsible for carrying out planned and reactive maintenance on all Utilities equipment and services, in support of high speed packaging lines. Accountabilities: Duties include: Mechanical maintenance, including Undertake, drive and support maintenance and improvement activities Identify Continuous Improvement opportunities Develop SOPs and learning documentation to share best practices across shifts with respect to maintenance and CIL Review and develop safety and maintenance procedures Liaise with suppliers of OEM's for the provision of spares/services Liaise with suppliers for delivery of chemicals and CO2 Support the development and maintenance of a high performance, flexible and "can do" culture Carry out 5S routines Carry out planned preventative maintenance Machinery fault diagnosis and repairs Use of VPO tools to ensure sustainability of high departmental standards including 5S, Hygiene and PDCA Record all maintenance activities within maintenance management system (SAP) Maintenance prioritisation and planning Analyse machines to improve performance Identify critical spares for designated machines Refurbish spares as required Complete some work at heights, confined space & as a lone worker Project work Carry out quality inspections on jobs Liaise & assist client departments and customers Control maintenance tools, stores and equipment Monitor and control maintenance costs Write, review & update maintenance SOP's, OPL's & job tasks. Work in a safe manner following all company policies and procedures Ensure all safety systems are in working order Drive awareness of Energy usage on site, and monitor and measure this to ensure we deliver our Better World targets Operate and monitor all Utilities equipment and services i.e. boilers, refrigeration, air compressors, water treatment, waste water treatment, CO2 recovery Key skills, knowledge and Competencies Proactive & self-managed engineer who is professional and has a positive "can do" attitude Good communication skills Takes pride in the work they are completing On occasions you will be expected to work with external contractors Understanding of LEAN, Continuous Improvements, HACCP, Food Safety protocols. A working knowledge of VPO tools is required Comply with health, safety, hygiene and 5S standards policies and practices at all times and ensure standards are maintained Committed to a high performance and CI environment Support a "Learning Organisation" environment Strong analytical skills and good IT literacy Ability to make decisions and challenge 5S and hygiene will be of the utmost importance, so a good understanding of Quality testing and microbiology would be useful. Ability to work as part of a team, interacting effectively with a variety of departments and individuals Strong organisation skills with a structured and systematic approach, adhering to deadlines, able to work on own initiative and prioritise workload effectively. Recognised Boiler Operation qualification Key Experience and Qualifications: Recognised apprenticeship, NVQ3 or equivalent mechanical qualification Proven fault finding and maintenance of high speed production equipment Good communication skills Experience in a multi-disciplined engineering function Excellent knowledge of manufacturing principles, tools and techniques Good numeracy, literacy and verbal communication skills
Sep 22, 2022
Full time
Seniority Level: Associate Primary purpose and function of position: Reporting to the Technical Services First Line Manager, the role of a Utilities Operator Technician is a multi-skilled position. You will be responsible for maintaining and operating the boilers, refrigeration, air compressors, water treatment, waste water treatment, CO2 recovery, and the day to day running of all the utilities equipment and services. This job description and the job title Utilities Operator Technician is not necessarily descriptive of all duties and does not restrict flexibility. You may be required, from time to time, to carry out tasks in addition to or instead of your normal duties, either for the brewery or for AB InBev, provided that they are reasonable and within your capabilities. Principal Duties and Responsibilities: Working for the Technical Services Department you will work in a team consisting of multi skilled engineers. You be responsible for carrying out planned and reactive maintenance on all Utilities equipment and services, in support of high speed packaging lines. Accountabilities: Duties include: Mechanical maintenance, including Undertake, drive and support maintenance and improvement activities Identify Continuous Improvement opportunities Develop SOPs and learning documentation to share best practices across shifts with respect to maintenance and CIL Review and develop safety and maintenance procedures Liaise with suppliers of OEM's for the provision of spares/services Liaise with suppliers for delivery of chemicals and CO2 Support the development and maintenance of a high performance, flexible and "can do" culture Carry out 5S routines Carry out planned preventative maintenance Machinery fault diagnosis and repairs Use of VPO tools to ensure sustainability of high departmental standards including 5S, Hygiene and PDCA Record all maintenance activities within maintenance management system (SAP) Maintenance prioritisation and planning Analyse machines to improve performance Identify critical spares for designated machines Refurbish spares as required Complete some work at heights, confined space & as a lone worker Project work Carry out quality inspections on jobs Liaise & assist client departments and customers Control maintenance tools, stores and equipment Monitor and control maintenance costs Write, review & update maintenance SOP's, OPL's & job tasks. Work in a safe manner following all company policies and procedures Ensure all safety systems are in working order Drive awareness of Energy usage on site, and monitor and measure this to ensure we deliver our Better World targets Operate and monitor all Utilities equipment and services i.e. boilers, refrigeration, air compressors, water treatment, waste water treatment, CO2 recovery Key skills, knowledge and Competencies Proactive & self-managed engineer who is professional and has a positive "can do" attitude Good communication skills Takes pride in the work they are completing On occasions you will be expected to work with external contractors Understanding of LEAN, Continuous Improvements, HACCP, Food Safety protocols. A working knowledge of VPO tools is required Comply with health, safety, hygiene and 5S standards policies and practices at all times and ensure standards are maintained Committed to a high performance and CI environment Support a "Learning Organisation" environment Strong analytical skills and good IT literacy Ability to make decisions and challenge 5S and hygiene will be of the utmost importance, so a good understanding of Quality testing and microbiology would be useful. Ability to work as part of a team, interacting effectively with a variety of departments and individuals Strong organisation skills with a structured and systematic approach, adhering to deadlines, able to work on own initiative and prioritise workload effectively. Recognised Boiler Operation qualification Key Experience and Qualifications: Recognised apprenticeship, NVQ3 or equivalent mechanical qualification Proven fault finding and maintenance of high speed production equipment Good communication skills Experience in a multi-disciplined engineering function Excellent knowledge of manufacturing principles, tools and techniques Good numeracy, literacy and verbal communication skills
Who are we? Thames Water is the UK's largest water and wastewater company. We make a daily difference to our 15 million customers by supplying 2.6 billion litres of water through 32,000 km's of pipes, to keep taps flowing and toilets flushing. We are an essential service and have operated throughout the Covid-19 pandemic. At Thames Water, every one of our actions, big and small, matters every day. Water is essential to daily life, and that means our business is always open. What is the purpose of this role? We are currently seeking a mobile instrumentation, control & automation (ICA) engineering technician to ensure that all equipment associated with our sewage treatment works are running safely and efficiently using both proactive and reactive maintenance methods. The purpose of the ICA engineering technician is to inspect, maintain, test or repair as appropriate, SCADA (supervisory control and data acquisition) and associated PLC's, instrumentation, control and automation equipment. Working as park of the maintenance team you will follow robust maintenance plans as well as getting involved in minor installation projects, electrical fault finding and emergency breakdown repairs to ensure our plant operates 24 hours a day, 365 days a year. What makes this role unique? Working outside with no one day being the same provides a very interesting working environment. You will be presented with unique challenges whether it's using your expertise to diagnose control faults or replace network infrastructure equipment. This role offers the opportunity to be part of a great team that has a real 'family' feel, so you will never be short of support. This process orientated role will allow you to gain experience on a wide range of plants and equipment some of which are innovative investments providing exciting new experiences. You will receive competitive benefits as well as full training on health & safety procedures and technical and process methods related to the plant. What will this role involve? This ICA engineering technician will be working in a multi-disciplinary team alongside civil, mechanical, process and electrical technicians, with the following responsibilities: Installing, modifying and commissioning new plant equipment to relevant standards and to diagnose and repair faults on systems and plants. Proactively identifying and reporting follow on work or areas for enhancement. Liaising and supervising contractors and suppliers where necessary. Carrying out instrumentation, control and automation maintenance on a variety of waste-water assets including planned and defect maintenance. Delivering cost effective improvements to assets and systems. Conducting your own risk assessments and create appropriate method statements when required to safely carry out maintenance activities. Providing specialist technical advice where appropriate with up to date technical knowledge and provide training support for technical trainees. Carry out scheduled planned maintenance work in compliance with company procedures to minimize plant breakdowns. Support project development and input into capital delivery projects. Investigate the nature of plant failures and subsequently carry out repairs as quickly and efficiently as possible in order to avoid interruptions to the process. Examples of some instrumentation you could be working on are: flowmeters, pressure levels, ultrasonic, radar, gas detection, PH monitor. What skills are we looking for? Do you have experience working with SCADA and related PLCs? A good, practical understanding of operational plant and control systems is essential. As well as an understanding of Wonder ware and Clear SCADA, relay logic and PLCs (Rockwell & Alan Bradley) which will include management and programming. The ideal candidate will have the ability to read and fault find from circuit diagrams as well as have previous experience of inverter drives. We are looking for someone with experience of calibration and maintenance of front line instrumentation. Ideally you will be qualified to HNC level or otherwise will have City and Guilds Part 2 or NVQ level 3 (or equivalent) in an electrical subject. Due to the nature of the role a valid driving licence is essential and as the post will work across a number of sites in the region. The work will require physical fitness and the ability to work in confined spaces with successful completion of the appropriate training; as well as flexibility to work on an out of hours rota when necessary. Working hours for the role is 07.30am - 15.30pm. All necessary equipment such as vehicle and tools are provided. Please note, you must live within an hour of the site location due to being able to respond to emergencies in time What's in it for you! Our competitive salary package includes an excellent contributory pension, 24 days holiday per year increasing to 28 with the length of service and a wider benefits scheme. Thames Water is a unique, rewarding and diverse place to work. If you join our team, you'll enjoy fast-tracked career opportunities, flexible working arrangements and unparalleled benefits. We're also proud to be an equal opportunity employer, Stonewall Diversity Champion and Disability Confident Leader and we are a Times Top 50 Employer for Women. You can find out more in our working for us section of our website
Jan 04, 2022
Full time
Who are we? Thames Water is the UK's largest water and wastewater company. We make a daily difference to our 15 million customers by supplying 2.6 billion litres of water through 32,000 km's of pipes, to keep taps flowing and toilets flushing. We are an essential service and have operated throughout the Covid-19 pandemic. At Thames Water, every one of our actions, big and small, matters every day. Water is essential to daily life, and that means our business is always open. What is the purpose of this role? We are currently seeking a mobile instrumentation, control & automation (ICA) engineering technician to ensure that all equipment associated with our sewage treatment works are running safely and efficiently using both proactive and reactive maintenance methods. The purpose of the ICA engineering technician is to inspect, maintain, test or repair as appropriate, SCADA (supervisory control and data acquisition) and associated PLC's, instrumentation, control and automation equipment. Working as park of the maintenance team you will follow robust maintenance plans as well as getting involved in minor installation projects, electrical fault finding and emergency breakdown repairs to ensure our plant operates 24 hours a day, 365 days a year. What makes this role unique? Working outside with no one day being the same provides a very interesting working environment. You will be presented with unique challenges whether it's using your expertise to diagnose control faults or replace network infrastructure equipment. This role offers the opportunity to be part of a great team that has a real 'family' feel, so you will never be short of support. This process orientated role will allow you to gain experience on a wide range of plants and equipment some of which are innovative investments providing exciting new experiences. You will receive competitive benefits as well as full training on health & safety procedures and technical and process methods related to the plant. What will this role involve? This ICA engineering technician will be working in a multi-disciplinary team alongside civil, mechanical, process and electrical technicians, with the following responsibilities: Installing, modifying and commissioning new plant equipment to relevant standards and to diagnose and repair faults on systems and plants. Proactively identifying and reporting follow on work or areas for enhancement. Liaising and supervising contractors and suppliers where necessary. Carrying out instrumentation, control and automation maintenance on a variety of waste-water assets including planned and defect maintenance. Delivering cost effective improvements to assets and systems. Conducting your own risk assessments and create appropriate method statements when required to safely carry out maintenance activities. Providing specialist technical advice where appropriate with up to date technical knowledge and provide training support for technical trainees. Carry out scheduled planned maintenance work in compliance with company procedures to minimize plant breakdowns. Support project development and input into capital delivery projects. Investigate the nature of plant failures and subsequently carry out repairs as quickly and efficiently as possible in order to avoid interruptions to the process. Examples of some instrumentation you could be working on are: flowmeters, pressure levels, ultrasonic, radar, gas detection, PH monitor. What skills are we looking for? Do you have experience working with SCADA and related PLCs? A good, practical understanding of operational plant and control systems is essential. As well as an understanding of Wonder ware and Clear SCADA, relay logic and PLCs (Rockwell & Alan Bradley) which will include management and programming. The ideal candidate will have the ability to read and fault find from circuit diagrams as well as have previous experience of inverter drives. We are looking for someone with experience of calibration and maintenance of front line instrumentation. Ideally you will be qualified to HNC level or otherwise will have City and Guilds Part 2 or NVQ level 3 (or equivalent) in an electrical subject. Due to the nature of the role a valid driving licence is essential and as the post will work across a number of sites in the region. The work will require physical fitness and the ability to work in confined spaces with successful completion of the appropriate training; as well as flexibility to work on an out of hours rota when necessary. Working hours for the role is 07.30am - 15.30pm. All necessary equipment such as vehicle and tools are provided. Please note, you must live within an hour of the site location due to being able to respond to emergencies in time What's in it for you! Our competitive salary package includes an excellent contributory pension, 24 days holiday per year increasing to 28 with the length of service and a wider benefits scheme. Thames Water is a unique, rewarding and diverse place to work. If you join our team, you'll enjoy fast-tracked career opportunities, flexible working arrangements and unparalleled benefits. We're also proud to be an equal opportunity employer, Stonewall Diversity Champion and Disability Confident Leader and we are a Times Top 50 Employer for Women. You can find out more in our working for us section of our website
