Our client, is a leader in the Defence and Security sector, they're seeking a Principal ILS Engineer for a permanent position. The role is based in High Wycombe and the successful candidate will report to the Head of Support. This position offers an opportunity to grow your career within a dynamic environment, with exposure to groundbreaking technologies and systems, including the world's first of its kind! They will challenge and support you to nurture your potential as an engineer, giving you the opportunity to utilise and build your skills across all Integrated Logistics Support (ILS) disciplines, including Reliability, Availability, Maintainability, Human Factors, Training, Lifecycle Engineering, and Support Solution Design. Key Responsibilities: Working under the mentorship of the Head of Support, you will apply sound engineering judgement to ensure products are developed to be supportable and to develop the support solution and acquire the necessary resources for support. You will act as the ILS Project Lead and take ownership of ILS activities where required. Responsibilities include : Tailoring the scope and scale of ILS activities to meet the User, Customer, and our client's requirements Working collaboratively with designers to improve reliability, maintainability, and usability aspects of designs Providing input to develop the optimum support solution for each customer Completing lifecycle cost analyses, level of repair analyses, sparing analyses, and failure modes and effects analyses Eliciting and deriving support requirements and proposing verification methods Developing supportability cases and conducting analyses to provide progressive assurance of support solutions Performing reliability modelling and maintainability analysis to optimise support arrangements Assessing the human element of systems, including potential for human error contributing to system failures Preparing technical manuals such as troubleshooting guides or operations and maintenance manuals Assisting with hazard identification and mitigation through system hazard analysis Formulating and implementing the obsolescence strategy for a product line Supporting the continuous improvement of processes, policies, and procedures Skills, Qualification, and Experience: Our client is looking for a dynamic, professional engineer, with experience in a high technology or regulated industry. You should have: A bachelor's degree in engineering or a technical equivalent (navy, army or air force equivalent in mechanical or electrical) or equivalent experience Knowledge and experience in Reliability & Maintainability - Reliability Prediction, RBDs, FTAs, FMECAs, MTAs, FRACAS/DRACAS, etc. Ability to review work produced by domain specialists across: Integrated Logistics Support - LCC, LORA, sparing, obsolescence, etc. Operational Analysis & Whole Life Cost Modelling - Business Case Analysis, Availability Trade-Off Analysis, etc. Training Development, Design and Delivery Security Clearance (SC) or the capability to achieve it A full driving licence (role is office-based with occasional travel across sites and to customer and supplier locations) Experience using PTC Windchill, Isograph, or other modelling software (considered an asset) Personal Attributes: To achieve your personal and professional goals, you will: Display excellent interpersonal skills with a talent for rapidly building rapport with a broad range of internal and external customers Resolve conflict wherever it arises, promoting harmony within the team Possess excellent communication skills and the empathy to adapt your communication style to others' needs Provide mentorship and guidance to less experienced co-workers Benefits on Offer: Optional 9 day fortnight TOIL (Time off in Lieu) Flexible working hours 1pm finish on a Friday Annual bonus Hybrid working for certain job roles Casual dress 25 days holiday with Christmas shut down Option to buy or sell holiday Private healthcare, dental, and critical illness options via salary sacrifice Discounts at over 200 online stores through the reward hub 4 x annual salary life cover Pension starting at 5% Employer / 4% Employee, with options to adjust contributions If you are ready to advance your career as a Principal ILS Engineer, apply now to join our client in shaping the future of defence and security technology! I would recommend applying for this role, even if you feel that you don't hit all of the requirements! Please reach out to me to discuss further.
Feb 12, 2025
Full time
Our client, is a leader in the Defence and Security sector, they're seeking a Principal ILS Engineer for a permanent position. The role is based in High Wycombe and the successful candidate will report to the Head of Support. This position offers an opportunity to grow your career within a dynamic environment, with exposure to groundbreaking technologies and systems, including the world's first of its kind! They will challenge and support you to nurture your potential as an engineer, giving you the opportunity to utilise and build your skills across all Integrated Logistics Support (ILS) disciplines, including Reliability, Availability, Maintainability, Human Factors, Training, Lifecycle Engineering, and Support Solution Design. Key Responsibilities: Working under the mentorship of the Head of Support, you will apply sound engineering judgement to ensure products are developed to be supportable and to develop the support solution and acquire the necessary resources for support. You will act as the ILS Project Lead and take ownership of ILS activities where required. Responsibilities include : Tailoring the scope and scale of ILS activities to meet the User, Customer, and our client's requirements Working collaboratively with designers to improve reliability, maintainability, and usability aspects of designs Providing input to develop the optimum support solution for each customer Completing lifecycle cost analyses, level of repair analyses, sparing analyses, and failure modes and effects analyses Eliciting and deriving support requirements and proposing verification methods Developing supportability cases and conducting analyses to provide progressive assurance of support solutions Performing reliability modelling and maintainability analysis to optimise support arrangements Assessing the human element of systems, including potential for human error contributing to system failures Preparing technical manuals such as troubleshooting guides or operations and maintenance manuals Assisting with hazard identification and mitigation through system hazard analysis Formulating and implementing the obsolescence strategy for a product line Supporting the continuous improvement of processes, policies, and procedures Skills, Qualification, and Experience: Our client is looking for a dynamic, professional engineer, with experience in a high technology or regulated industry. You should have: A bachelor's degree in engineering or a technical equivalent (navy, army or air force equivalent in mechanical or electrical) or equivalent experience Knowledge and experience in Reliability & Maintainability - Reliability Prediction, RBDs, FTAs, FMECAs, MTAs, FRACAS/DRACAS, etc. Ability to review work produced by domain specialists across: Integrated Logistics Support - LCC, LORA, sparing, obsolescence, etc. Operational Analysis & Whole Life Cost Modelling - Business Case Analysis, Availability Trade-Off Analysis, etc. Training Development, Design and Delivery Security Clearance (SC) or the capability to achieve it A full driving licence (role is office-based with occasional travel across sites and to customer and supplier locations) Experience using PTC Windchill, Isograph, or other modelling software (considered an asset) Personal Attributes: To achieve your personal and professional goals, you will: Display excellent interpersonal skills with a talent for rapidly building rapport with a broad range of internal and external customers Resolve conflict wherever it arises, promoting harmony within the team Possess excellent communication skills and the empathy to adapt your communication style to others' needs Provide mentorship and guidance to less experienced co-workers Benefits on Offer: Optional 9 day fortnight TOIL (Time off in Lieu) Flexible working hours 1pm finish on a Friday Annual bonus Hybrid working for certain job roles Casual dress 25 days holiday with Christmas shut down Option to buy or sell holiday Private healthcare, dental, and critical illness options via salary sacrifice Discounts at over 200 online stores through the reward hub 4 x annual salary life cover Pension starting at 5% Employer / 4% Employee, with options to adjust contributions If you are ready to advance your career as a Principal ILS Engineer, apply now to join our client in shaping the future of defence and security technology! I would recommend applying for this role, even if you feel that you don't hit all of the requirements! Please reach out to me to discuss further.
Job Title: Principal ILS Engineer Location: High Wycombe Salary: DOE - We are booking interviews next week! Please call or email for a slot Key Skills: Integrated Logistics Support, Reliability, Lifecycle Engineering, Defence, Maritime, Naval, RBDs, FMECAs, MTAs, FRACAS/DRACAS, FMEA, RBDs, FTAs Join Our Team as a Principal ILS Engineer and Drive Supportability to New Heights! Are you a meticulous Principal ILS Engineer with a passion for precision and excellence? Are you ready to play a pivotal role in ensuring top-tier standards in a well-established engineering organization? Look no further! We invite you to join our team in High Wycombe and be a key driver of engineering excellence. About Us: As a distinguished leader in the engineering industry, we are dedicated to delivering innovative solutions and pioneering projects. Our commitment to excellence has earned us a strong reputation, and we're looking for a talented Principal Supportability Engineer to contribute to our continued success. The Role: So, what will you be doing as a Principal ILS Engineer ? Lead ILS activities across multiple systems, tailoring the scope to meet customer and project requirements. Collaborate with design teams to enhance the reliability, maintainability, and usability of Ultra's designs. Develop and deliver optimal support solutions aligned with product and capability roadmaps. Conduct detailed analyses, including: Life Cycle Cost Analysis Failure Modes and Effects Analysis (FMEA) Level of Repair Analysis (LORA) Reliability Block Diagrams (RBDs) and Fault Tree Analyses (FTAs) Drive the development of supportability cases and technical manuals, such as troubleshooting guides and operations/maintenance documentation. Formulate obsolescence strategies for product lines and support hazard mitigation through system hazard analysis. Continuously improve processes, policies, and procedures to enhance operational effectiveness. What are we looking for in our next Principal ILS Engineer ? A bachelor's degree in engineering or equivalent technical/military experience in mechanical, electrical, or related fields. Robust knowledge and experience in: Reliability & Maintainability (e.g., RBDs, FMECAs, MTAs, FRACAS/DRACAS). Integrated Logistics Support (e.g., LCC, LORA, obsolescence strategies). Operational Analysis & Whole Life Cost Modelling (e.g., COIEAs, Availability Trade-Off Analysis). Training Development, Design, and Delivery. Proficiency with tools like PTC Windchill, Isograph, or similar modelling software (preferred). Security Clearance (SC) or eligibility to achieve SC, with no caveats. A full UK driving license, with occasional travel required across Ultra sites and to customer and supplier locations. My client is keen to get this position filled ASAP, so if you feel you have the skills and desire to provide passion and drive as the next Principal Supportability Engineer, this is the opportunity for you! So, if you are interested in joining a well-established, renowned, globally recognised organisation working with experts in their field as the next Principal Supportability Engineer, hit that apply button now! Perks and Benefits: Competitive Salary: Attractive compensation package based on experience and expertise. Comprehensive Benefits: Health, dental, and retirement plans to support your well-being. Professional Growth: Opportunities for continuous learning and career advancement. Cutting-Edge Projects: Engage in groundbreaking engineering projects that impact the industry. Collaborative Environment: Work alongside industry experts in a dynamic and innovative setting . How to Apply: Showcase your expertise and passion for Reliability & Maintainability. Submit your updated resume and a cover letter outlining your experience and enthusiasm for joining our team in High Wycombe. PLEASE NOTE Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Feb 12, 2025
Full time
Job Title: Principal ILS Engineer Location: High Wycombe Salary: DOE - We are booking interviews next week! Please call or email for a slot Key Skills: Integrated Logistics Support, Reliability, Lifecycle Engineering, Defence, Maritime, Naval, RBDs, FMECAs, MTAs, FRACAS/DRACAS, FMEA, RBDs, FTAs Join Our Team as a Principal ILS Engineer and Drive Supportability to New Heights! Are you a meticulous Principal ILS Engineer with a passion for precision and excellence? Are you ready to play a pivotal role in ensuring top-tier standards in a well-established engineering organization? Look no further! We invite you to join our team in High Wycombe and be a key driver of engineering excellence. About Us: As a distinguished leader in the engineering industry, we are dedicated to delivering innovative solutions and pioneering projects. Our commitment to excellence has earned us a strong reputation, and we're looking for a talented Principal Supportability Engineer to contribute to our continued success. The Role: So, what will you be doing as a Principal ILS Engineer ? Lead ILS activities across multiple systems, tailoring the scope to meet customer and project requirements. Collaborate with design teams to enhance the reliability, maintainability, and usability of Ultra's designs. Develop and deliver optimal support solutions aligned with product and capability roadmaps. Conduct detailed analyses, including: Life Cycle Cost Analysis Failure Modes and Effects Analysis (FMEA) Level of Repair Analysis (LORA) Reliability Block Diagrams (RBDs) and Fault Tree Analyses (FTAs) Drive the development of supportability cases and technical manuals, such as troubleshooting guides and operations/maintenance documentation. Formulate obsolescence strategies for product lines and support hazard mitigation through system hazard analysis. Continuously improve processes, policies, and procedures to enhance operational effectiveness. What are we looking for in our next Principal ILS Engineer ? A bachelor's degree in engineering or equivalent technical/military experience in mechanical, electrical, or related fields. Robust knowledge and experience in: Reliability & Maintainability (e.g., RBDs, FMECAs, MTAs, FRACAS/DRACAS). Integrated Logistics Support (e.g., LCC, LORA, obsolescence strategies). Operational Analysis & Whole Life Cost Modelling (e.g., COIEAs, Availability Trade-Off Analysis). Training Development, Design, and Delivery. Proficiency with tools like PTC Windchill, Isograph, or similar modelling software (preferred). Security Clearance (SC) or eligibility to achieve SC, with no caveats. A full UK driving license, with occasional travel required across Ultra sites and to customer and supplier locations. My client is keen to get this position filled ASAP, so if you feel you have the skills and desire to provide passion and drive as the next Principal Supportability Engineer, this is the opportunity for you! So, if you are interested in joining a well-established, renowned, globally recognised organisation working with experts in their field as the next Principal Supportability Engineer, hit that apply button now! Perks and Benefits: Competitive Salary: Attractive compensation package based on experience and expertise. Comprehensive Benefits: Health, dental, and retirement plans to support your well-being. Professional Growth: Opportunities for continuous learning and career advancement. Cutting-Edge Projects: Engage in groundbreaking engineering projects that impact the industry. Collaborative Environment: Work alongside industry experts in a dynamic and innovative setting . How to Apply: Showcase your expertise and passion for Reliability & Maintainability. Submit your updated resume and a cover letter outlining your experience and enthusiasm for joining our team in High Wycombe. PLEASE NOTE Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Principal Acoustic Consultant Greater London Permanent Ref: DB2457 Competitive Salary Plus Benefits Our client is looking for an experienced Acoustic Consultant to join their well-established independent Consultancy. The successful candidate will have the opportunity to work across various sectors with projects in government ministries, local councils, hospitals, schools and many more. Principal Acoustic Consultant Requirements: Degree in Acoustics and Noise Control or similar Relevant experience in Environmental or Building Acoustics Full UK Driving License Acoustic Products Sound Insulation Tester Excellent communication skills, written and verbal Knowledge of mechanical services engineering and noise control Full Member of IOA Principal Acoustic Consultant Duties: Planning and undertaking noise measurement surveys Sound insulation testing 3D noise modelling Completing technical reports Undertaking data analysis Travel to sites Liaising with clients and internal stakeholders Benefits: Private Medical Insurance Pension Generous Holiday Allowance Training & Progression Many more! Interested? To discuss this position or other roles in the Sector, please contact Dina Bunkheila on (phone number removed), or email a copy of your CV over to (url removed)
Feb 12, 2025
Full time
Principal Acoustic Consultant Greater London Permanent Ref: DB2457 Competitive Salary Plus Benefits Our client is looking for an experienced Acoustic Consultant to join their well-established independent Consultancy. The successful candidate will have the opportunity to work across various sectors with projects in government ministries, local councils, hospitals, schools and many more. Principal Acoustic Consultant Requirements: Degree in Acoustics and Noise Control or similar Relevant experience in Environmental or Building Acoustics Full UK Driving License Acoustic Products Sound Insulation Tester Excellent communication skills, written and verbal Knowledge of mechanical services engineering and noise control Full Member of IOA Principal Acoustic Consultant Duties: Planning and undertaking noise measurement surveys Sound insulation testing 3D noise modelling Completing technical reports Undertaking data analysis Travel to sites Liaising with clients and internal stakeholders Benefits: Private Medical Insurance Pension Generous Holiday Allowance Training & Progression Many more! Interested? To discuss this position or other roles in the Sector, please contact Dina Bunkheila on (phone number removed), or email a copy of your CV over to (url removed)
Job Title: Principal Engineer - Electrical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of electrical test, measurement and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review, and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Electrical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Electrical Calibration Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Experience in Mechanical / Dimensional / Temperature calibrations Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Electrical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Electrical focuses the calibration of TMDE capable of making AC/DC voltage, current, resistance, inductance, capacitance, and time & frequency measurements. ICS Electrical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site and Walney Aerodrome. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Electrical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of electrical test, measurement and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review, and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Electrical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Electrical Calibration Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Experience in Mechanical / Dimensional / Temperature calibrations Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Electrical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Electrical focuses the calibration of TMDE capable of making AC/DC voltage, current, resistance, inductance, capacitance, and time & frequency measurements. ICS Electrical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site and Walney Aerodrome. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require full time on-site presence Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to Degree level in Engineering, Mechanical or Science Subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Have an Engineering Lifecycle background Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The T&C Engineering Support team: Being a part of the team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great a opportunity for career development. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles working for BAE Systems will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Closing Date: 19th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require full time on-site presence Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to Degree level in Engineering, Mechanical or Science Subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Have an Engineering Lifecycle background Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The T&C Engineering Support team: Being a part of the team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great a opportunity for career development. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles working for BAE Systems will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Closing Date: 19th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require full time on-site presence Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to Degree level in Engineering, Mechanical or Science Subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Have an Engineering Lifecycle background Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The T&C Engineering Support team: Being a part of the team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great a opportunity for career development. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles working for BAE Systems will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Closing Date: 19th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require full time on-site presence Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to Degree level in Engineering, Mechanical or Science Subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Have an Engineering Lifecycle background Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The T&C Engineering Support team: Being a part of the team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great a opportunity for career development. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles working for BAE Systems will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Closing Date: 19th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
In this role, you will report to the Project Engineering Lead and functional Line Manager whilst collaborating closely with the Systems Design Authority within a multi-disciplinary team. You will work across Technology Readiness Levels, enhancing existing products, managing obsolescence, and providing support for developers, design reviews, and customer meetings. This Principal Systems Engineer position is well-suited for someone with: A strong appreciation for designing complex products. Systems design experience, with knowledge of electronics, mechanical, and software integration. Proven experience across the entire development lifecycle, including design, integration, verification, validation, and qualification. Expertise in conducting trade-off analyses to inform design decisions. This hybrid role offers flexibility, allowing you to balance remote work with on-site responsibilities as needed, along with occasional travel within the UK and internationally to destinations such as Canada and Australia! Employee benefits include; Optional 9-day fortnight Time off in lieu (TOIL) Flexible working hours Annual bonus Hybrid working (role-dependent) Casual dress code 25 days holiday + Christmas shutdown Holiday purchase/sale options Private healthcare, dental, and critical illness cover (via salary sacrifice) Discounts at 200+ online stores (Reward Hub) Life cover (4x annual salary) To chat further about this role, please feel free to reach out to me! I would recommend applying for this role, even if you feel that you aren't hitting all of the required points / experience.
Feb 12, 2025
Full time
In this role, you will report to the Project Engineering Lead and functional Line Manager whilst collaborating closely with the Systems Design Authority within a multi-disciplinary team. You will work across Technology Readiness Levels, enhancing existing products, managing obsolescence, and providing support for developers, design reviews, and customer meetings. This Principal Systems Engineer position is well-suited for someone with: A strong appreciation for designing complex products. Systems design experience, with knowledge of electronics, mechanical, and software integration. Proven experience across the entire development lifecycle, including design, integration, verification, validation, and qualification. Expertise in conducting trade-off analyses to inform design decisions. This hybrid role offers flexibility, allowing you to balance remote work with on-site responsibilities as needed, along with occasional travel within the UK and internationally to destinations such as Canada and Australia! Employee benefits include; Optional 9-day fortnight Time off in lieu (TOIL) Flexible working hours Annual bonus Hybrid working (role-dependent) Casual dress code 25 days holiday + Christmas shutdown Holiday purchase/sale options Private healthcare, dental, and critical illness cover (via salary sacrifice) Discounts at 200+ online stores (Reward Hub) Life cover (4x annual salary) To chat further about this role, please feel free to reach out to me! I would recommend applying for this role, even if you feel that you aren't hitting all of the required points / experience.
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. The Role: This role sits within our Saab Seaeye Business Unit. Responsible for leading and developing the Integration Team at Saab Seaeye as well as leading the integration, test and commissioning of our Saab Seaeye products in order to meet our contractual and business requirements. Job Purpose: To lead and develop the Integration Team at Saab Seaeye. To lead the integration, test and commissioning of Seaeye products to meet contractual and business requirements. Key skills and responsibilities: Team leadership and mentoring of team members - possessing technical knowledge and problem solving skills. Five years/HNC minimum experience in an Electrical preferred or Mechanical engineering environment. Promoting a safe working area and strict adherence to appropriate safety standards. 6S standards implemented and sustained. On time delivery of integrated and commissioned systems to the required quality standard Internal Factory acceptance testing Lean manufacturing principals - streamlining processes and removing waste with continuous improvement philosophy in place. Support production engineering in the development and implementation of improved production methods for new and existing products. Skills and competence development of the Integration team via structured training plan. Capacity and resource planning for the integration area in line with Seaeye business forecasts. Positive collaboration with key internal stakeholders/suppliers. Preferred skills and experience: Support project managers to deliver Factory Acceptance Testing with customers on site. Technical knowledge and problem solving skills Seaeye Product knowledge - ROV and Sub-Assembly level. Offshore energy domain knowledge and experience. General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role. To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role. To act ethically, with integrity and in the best interest of the business at all times. To maintain a professional and supportive relationship with team members and other departments in order to deliver business objectives or deadlines. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Feb 12, 2025
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. The Role: This role sits within our Saab Seaeye Business Unit. Responsible for leading and developing the Integration Team at Saab Seaeye as well as leading the integration, test and commissioning of our Saab Seaeye products in order to meet our contractual and business requirements. Job Purpose: To lead and develop the Integration Team at Saab Seaeye. To lead the integration, test and commissioning of Seaeye products to meet contractual and business requirements. Key skills and responsibilities: Team leadership and mentoring of team members - possessing technical knowledge and problem solving skills. Five years/HNC minimum experience in an Electrical preferred or Mechanical engineering environment. Promoting a safe working area and strict adherence to appropriate safety standards. 6S standards implemented and sustained. On time delivery of integrated and commissioned systems to the required quality standard Internal Factory acceptance testing Lean manufacturing principals - streamlining processes and removing waste with continuous improvement philosophy in place. Support production engineering in the development and implementation of improved production methods for new and existing products. Skills and competence development of the Integration team via structured training plan. Capacity and resource planning for the integration area in line with Seaeye business forecasts. Positive collaboration with key internal stakeholders/suppliers. Preferred skills and experience: Support project managers to deliver Factory Acceptance Testing with customers on site. Technical knowledge and problem solving skills Seaeye Product knowledge - ROV and Sub-Assembly level. Offshore energy domain knowledge and experience. General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role. To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role. To act ethically, with integrity and in the best interest of the business at all times. To maintain a professional and supportive relationship with team members and other departments in order to deliver business objectives or deadlines. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Electrical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of electrical test, measurement and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review, and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Electrical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Electrical Calibration Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Experience in Mechanical / Dimensional / Temperature calibrations Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Electrical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Electrical focuses the calibration of TMDE capable of making AC/DC voltage, current, resistance, inductance, capacitance, and time & frequency measurements. ICS Electrical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site and Walney Aerodrome. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Electrical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of electrical test, measurement and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review, and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Electrical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Electrical Calibration Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Experience in Mechanical / Dimensional / Temperature calibrations Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Electrical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Electrical focuses the calibration of TMDE capable of making AC/DC voltage, current, resistance, inductance, capacitance, and time & frequency measurements. ICS Electrical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site and Walney Aerodrome. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Electrical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of electrical test, measurement and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review, and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Electrical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Electrical Calibration Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Experience in Mechanical / Dimensional / Temperature calibrations Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Electrical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Electrical focuses the calibration of TMDE capable of making AC/DC voltage, current, resistance, inductance, capacitance, and time & frequency measurements. ICS Electrical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site and Walney Aerodrome. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Electrical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of electrical test, measurement and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review, and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Electrical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Electrical Calibration Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Experience in Mechanical / Dimensional / Temperature calibrations Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Electrical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Electrical focuses the calibration of TMDE capable of making AC/DC voltage, current, resistance, inductance, capacitance, and time & frequency measurements. ICS Electrical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site and Walney Aerodrome. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Our client, a global engineering consultancy, is looking for a Principal Engineer Power Electronics, to join their team in Leamington Spa. This is a permanent position working 3 days on-site and 2 days at home. They specialise in rapid engineering and development of sustainable electrified propulsion systems and associated technologies, working directly and collaboratively with automotive, commercial vehicle, off-highway, aerospace and defence OEMs, Tier-1s and industry research bodies through their technical centres in North America, the U.K. and India. Position Description: In the role of Principal Engineer of Power Electronics, you will develop power electronics systems for a wide variety of applications from clean sheet through to hardware. This will involve developing requirements, circuit design, component selection and managing the implementation of prototype hardware for traction inverters, DCDC converters, On Board Chargers and other associated systems. Development of the functionality and performance of bespoke designs and new technology will be required in the virtual, HiL and hardware testing environments in DSD s well equipped facility. The role involves operating in a dynamic project environment including technical, commercial and customer management. Key Responsibilities: Lead the design and specification of magnetics and capacitors for power converters and inverters Lead design of mixed signal systems and processing platforms Lead simulation activities using industry tools (e.g. Simscape & PLECS) Collaborate and advise on control strategies for power converters and inverters Design to standards IEC61508, ISO26262, CISPR25 Leadership of multi person/cross functional, technically, and commercially challenging projects Build and own relationships with key customers Identify and generate new technical capability for the function Take ownership of large and cross functional project proposals, business development, marketing activities and presenting the company Continuous personal development, taking an active role in the technical and professional development of others within the function Working collaboratively with colleagues, clients, stakeholders and contributing to the team ethic at work Acting as a role model for DSD s values and professional standards You will need: Essential Extensive experience in the development of power electronics and magnetics technology e.g. inverters, OBC, DC/DC, AC/DC etc in at least two main sectors: automotive, aerospace, off-highway, commercial vehicle, defence, clean energy and/or marine Experience in the design of digital and mixed signal control and interface circuits Experience in the attenuation of electrical noise and design for EMC Expertise in the development of power electronic and magnetic systems in simulation environments The ability to plan and lead multi-person development projects and develop technical relationships with customers A degree or higher in (technical area) engineering OR related discipline OR equivalent demonstratable experience Desirable Familiarity with digital motor control schemes for a variety of motor technologies (IPM, SPM, ASM, SR etc) FOC, field weakened operation, overmodulation, harmonic current injection for NVH, fault and protection schemes etc A track record in the development of power electronics hardware in a lab, rig and final sector environment for demanding applications The ability to manage PCB layout, mechanical system design and the manufacture and assembly of power electronic systems Experience in the simulation and design of fluid systems, thermal simulation and management in power electronics systems Training in the safe use of high power, high voltage development and test equipment Diversity, Inclusion and Equality Our client is committed to fostering an inclusive and diverse workplace where everyone feels valued, respected, and supported. They believe that a diverse team drives innovation and helps us deliver the best solutions to our customers. They strive to create a recruitment process that is accessible to all and are dedicated to making reasonable adjustments to support candidates with different needs. If you have any specific requirements or would like to disclose anything that may help us to ensure a positive experience during the recruitment process, please let us know. We will do our best to accommodate your needs. Your application and any information you provide will be treated with the utmost confidentiality. We look forward to welcoming talented individuals from all backgrounds to join DSD
Feb 12, 2025
Full time
Our client, a global engineering consultancy, is looking for a Principal Engineer Power Electronics, to join their team in Leamington Spa. This is a permanent position working 3 days on-site and 2 days at home. They specialise in rapid engineering and development of sustainable electrified propulsion systems and associated technologies, working directly and collaboratively with automotive, commercial vehicle, off-highway, aerospace and defence OEMs, Tier-1s and industry research bodies through their technical centres in North America, the U.K. and India. Position Description: In the role of Principal Engineer of Power Electronics, you will develop power electronics systems for a wide variety of applications from clean sheet through to hardware. This will involve developing requirements, circuit design, component selection and managing the implementation of prototype hardware for traction inverters, DCDC converters, On Board Chargers and other associated systems. Development of the functionality and performance of bespoke designs and new technology will be required in the virtual, HiL and hardware testing environments in DSD s well equipped facility. The role involves operating in a dynamic project environment including technical, commercial and customer management. Key Responsibilities: Lead the design and specification of magnetics and capacitors for power converters and inverters Lead design of mixed signal systems and processing platforms Lead simulation activities using industry tools (e.g. Simscape & PLECS) Collaborate and advise on control strategies for power converters and inverters Design to standards IEC61508, ISO26262, CISPR25 Leadership of multi person/cross functional, technically, and commercially challenging projects Build and own relationships with key customers Identify and generate new technical capability for the function Take ownership of large and cross functional project proposals, business development, marketing activities and presenting the company Continuous personal development, taking an active role in the technical and professional development of others within the function Working collaboratively with colleagues, clients, stakeholders and contributing to the team ethic at work Acting as a role model for DSD s values and professional standards You will need: Essential Extensive experience in the development of power electronics and magnetics technology e.g. inverters, OBC, DC/DC, AC/DC etc in at least two main sectors: automotive, aerospace, off-highway, commercial vehicle, defence, clean energy and/or marine Experience in the design of digital and mixed signal control and interface circuits Experience in the attenuation of electrical noise and design for EMC Expertise in the development of power electronic and magnetic systems in simulation environments The ability to plan and lead multi-person development projects and develop technical relationships with customers A degree or higher in (technical area) engineering OR related discipline OR equivalent demonstratable experience Desirable Familiarity with digital motor control schemes for a variety of motor technologies (IPM, SPM, ASM, SR etc) FOC, field weakened operation, overmodulation, harmonic current injection for NVH, fault and protection schemes etc A track record in the development of power electronics hardware in a lab, rig and final sector environment for demanding applications The ability to manage PCB layout, mechanical system design and the manufacture and assembly of power electronic systems Experience in the simulation and design of fluid systems, thermal simulation and management in power electronics systems Training in the safe use of high power, high voltage development and test equipment Diversity, Inclusion and Equality Our client is committed to fostering an inclusive and diverse workplace where everyone feels valued, respected, and supported. They believe that a diverse team drives innovation and helps us deliver the best solutions to our customers. They strive to create a recruitment process that is accessible to all and are dedicated to making reasonable adjustments to support candidates with different needs. If you have any specific requirements or would like to disclose anything that may help us to ensure a positive experience during the recruitment process, please let us know. We will do our best to accommodate your needs. Your application and any information you provide will be treated with the utmost confidentiality. We look forward to welcoming talented individuals from all backgrounds to join DSD
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Want to have a laugh whilst you work? Want to contribute to a team who will have your back? Want to sack off all the red tape nonesense and concentrate on engineering? Don't want to work more than 40 hours a week? Well maybe this is for you. These guys don't take themselves too seriously. They work hard but want people to enjoy coming to work. The owners have families, they want to see them. They want you to see your family and friends too. They are nice people who treat their staff well. They are small enough to care. They offer: Well structured independent M&E consultancy ie. there's enough of them to get jobs completed without working stupid hours. Strong workload into 2024. They are well connected and turn down work rather than over work their staff. Real opportunities for career progression to Associate ( if you want it - no worries if you are happy crunching out designs Mixed team of young lads, mums, dads and some grey hair too. The role ( boring bit ): Engineering Services Design Limited are looking to appoint a technically strong, self-sufficient mechanical design engineer with a proven track record in building services. The successful applicant will be able to lead a project from inception to completion with minimal supervision and manage a small team of multi-discipline engineers reporting directly to the Associate Directors of the business. They will be able to represent the company at design team meetings, deal with all project correspondence and communicate effectively will all parties connected to each individual project. This position is a hands on role so detailed design skills are of paramount importance. It would be advantageous if you have good software skills including an understanding of REVIT/BIM and as a minimum AutoCad. ESD are a company keen on the development of engineers and training is paramount to their success. The practice is a REVIT/BIM operating business with training given to key engineers. If you have management experience and the ability to mentor others this will also be beneficial to the organisation. The company: ESD are a well structured, independent design consultancy who have successfully recruited a number of highly talented design engineers, graduate engineers and support staff over the last few years. Today they employ 10 staff who are based at their offices in Sale ( right next to the Metrolink ). ESD complete a wide range of consultancy services within the education, care home, residential and commercial sectors across the North West Region including North Wales with schemes successfully completed across the country. Their project work commonly consists of multi-million pound new build schemes with a combination of refurbishment and smaller key projects also undertaken which offers their engineers the opportunity to own a project from cradle to grave. This position offers a considerable opportunity for career development within the organisation as the company is enjoying a sustained period of growth. They are a true meritocracy who believe in rewarding good performance with career and financial incentives. They have a very strong leadership team. They are a bold and innovative company who have a strong and clear direction for the future of the business. They are looking for like minded individuals who want an environment which will allow them to achieve their full career potential. Very competitive salary with benefits.
Feb 12, 2025
Full time
Want to have a laugh whilst you work? Want to contribute to a team who will have your back? Want to sack off all the red tape nonesense and concentrate on engineering? Don't want to work more than 40 hours a week? Well maybe this is for you. These guys don't take themselves too seriously. They work hard but want people to enjoy coming to work. The owners have families, they want to see them. They want you to see your family and friends too. They are nice people who treat their staff well. They are small enough to care. They offer: Well structured independent M&E consultancy ie. there's enough of them to get jobs completed without working stupid hours. Strong workload into 2024. They are well connected and turn down work rather than over work their staff. Real opportunities for career progression to Associate ( if you want it - no worries if you are happy crunching out designs Mixed team of young lads, mums, dads and some grey hair too. The role ( boring bit ): Engineering Services Design Limited are looking to appoint a technically strong, self-sufficient mechanical design engineer with a proven track record in building services. The successful applicant will be able to lead a project from inception to completion with minimal supervision and manage a small team of multi-discipline engineers reporting directly to the Associate Directors of the business. They will be able to represent the company at design team meetings, deal with all project correspondence and communicate effectively will all parties connected to each individual project. This position is a hands on role so detailed design skills are of paramount importance. It would be advantageous if you have good software skills including an understanding of REVIT/BIM and as a minimum AutoCad. ESD are a company keen on the development of engineers and training is paramount to their success. The practice is a REVIT/BIM operating business with training given to key engineers. If you have management experience and the ability to mentor others this will also be beneficial to the organisation. The company: ESD are a well structured, independent design consultancy who have successfully recruited a number of highly talented design engineers, graduate engineers and support staff over the last few years. Today they employ 10 staff who are based at their offices in Sale ( right next to the Metrolink ). ESD complete a wide range of consultancy services within the education, care home, residential and commercial sectors across the North West Region including North Wales with schemes successfully completed across the country. Their project work commonly consists of multi-million pound new build schemes with a combination of refurbishment and smaller key projects also undertaken which offers their engineers the opportunity to own a project from cradle to grave. This position offers a considerable opportunity for career development within the organisation as the company is enjoying a sustained period of growth. They are a true meritocracy who believe in rewarding good performance with career and financial incentives. They have a very strong leadership team. They are a bold and innovative company who have a strong and clear direction for the future of the business. They are looking for like minded individuals who want an environment which will allow them to achieve their full career potential. Very competitive salary with benefits.
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Electrical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of electrical test, measurement and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review, and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Electrical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Electrical Calibration Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Experience in Mechanical / Dimensional / Temperature calibrations Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Electrical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Electrical focuses the calibration of TMDE capable of making AC/DC voltage, current, resistance, inductance, capacitance, and time & frequency measurements. ICS Electrical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site and Walney Aerodrome. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Electrical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of electrical test, measurement and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review, and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Electrical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Electrical Calibration Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Experience in Mechanical / Dimensional / Temperature calibrations Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Electrical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Electrical focuses the calibration of TMDE capable of making AC/DC voltage, current, resistance, inductance, capacitance, and time & frequency measurements. ICS Electrical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site and Walney Aerodrome. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require full time on-site presence Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to Degree level in Engineering, Mechanical or Science Subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Have an Engineering Lifecycle background Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The T&C Engineering Support team: Being a part of the team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great a opportunity for career development. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles working for BAE Systems will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Closing Date: 19th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require full time on-site presence Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to Degree level in Engineering, Mechanical or Science Subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Have an Engineering Lifecycle background Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The T&C Engineering Support team: Being a part of the team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great a opportunity for career development. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles working for BAE Systems will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Closing Date: 19th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Feb 12, 2025
Full time
Job Title: Principal Engineer - Mechanical Calibration Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Perform and supervise high level calibration / repair of Mechanical test, measurement, and diagnostic equipment (TMDE) including resource management and calibration workload signoff Write, review and approve calibration procedures and measurement uncertainty budgets Take part in UKAS (ISO 17025) audits and quickly achieve UKAS signatory status Deliver specific, target driven on the job training / experiential leaning to apprentices / lesser experienced team members Professional communication with technical stakeholders including consultation on new measurement technologies Your skills and experiences: Essential: Extensive experience in a precision Mechanical metrology laboratory environment Understanding of quality systems & standards (ISO 17025 / ISO 9001) Relevant academic qualification (STEM Degree, HNC/HND or equivalent) Desirable: Existing UKAS signatory status for Mechanical Calibrations (Pressure, Mass, Torque, Force) Experience in creation of measurement uncertainty budgets to ISO 17025 level Experience in use of automation software (Fluke Metcal, Met/Track, Met/Teams, Labview) Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The (ICS Mechanical) team: The calibration department currently supports 30,000 pieces of equipment per year, ranging from traditional analogue equipment through to state-of-the-art digital systems. ICS Mechanical focuses the calibration of TMDE capable of making pressure, mass, torque, and force measurements. ICS Mechanical supports calibrations in a dedicated laboratory as well on site around the Barrow Submarines Site. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 20th February 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.