Job Title: Senior EC&I Engineer Location: Plymouth, Bristol or Rosyth + Hybrid Working Arrangements Compensation: Competitive + Benefits Role Type: Full time / Permanent Role ID: SF56968 At Babcock we're working to create a safe and secure world, together, and if you join us, you can play your part as a Senior EC&I Engineer at our Devonport, Rosyth, or Bristol site. The role Would you like to join a growing multi-disciplinary team within the Electrical Engineering Group (EEG) within Babcock Energy and Marine? We currently have several vacancies for Senior Electrical and Electronic Design Engineers at our sites in Plymouth, Bristol and Rosyth. As a Senior Electrical and Electronic Design Engineer, you will have the support of a large team of likeminded electrical and electronic engineers to give support to, and to learn and give support from; sharing best practice and enabling you to grow within your profession. Day to day, you'll be: Responsible for Electrical/Electronic aspects of marine system design Integrating practical electrical, electronic combat and automation product solutions not only within the same disciplines but defining the interfaces with others constructively and mechanically. Providing electrical & electronic design support by preparing and checking design documentation, reviews, estimates and schedules, also, in support of tender responses requiring design input. Supervising, planning and controlling work to time, cost and quality. Developing Electrical/Electronic engineering design solutions for a variety of different platforms across the full Engineering Lifecycle. This will include substantiating the integrity and performance of new system designs within their operating environments. This role is full time, 36 hours per week and provides hybrid working arrangements with 2 days in the office/onsite and 3 days working from home. Essential experience of the Senior EC&I Engineer: You will have a high level of developed knowledge as the role is directly accountable for design development, and determining solutions to problems and issues within the specialist subject area. The ideal candidate will be at a Senior Electrical/Electronic Design Engineer level with significant experience in engineering calculation, analysis and integration with an in-depth understanding of system electrical design, and skilled in supporting and developing less experienced team members. It would be beneficial if you have experience working on UK naval marine shipbuilding projects or defence related design experience but this is not essential. Electrical & Electronics experience in other industries would be considered including facilities, Oil & Gas and Aviation. Experience of operating in a defence or high safety integrity environment Experience of all phases of the engineering lifecycle and configuration control systems Qualifications for the Senior EC&I Engineer: Qualified to degree level, or HNC/HND equivalent, coupled with significant experience in the relevant engineering discipline. Ideally, you will be a member of a relevant institution (e.g. RINA, IET, IMechE, IMarEst etc.) and hold or working towards Chartered or Incorporated status or you will have significant demonstrable engineering experience and capable of registration with the Engineering Council at CEng level. Security Clearance The successful candidate must be able to achieve and maintain Security Check (SC) security clearance for this role. Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held. What we offer Generous holiday allowance Matched contribution pension scheme, with life assurance Employee share scheme Employee shopping savings portal Payment of Professional Fees Reservists in the armed forces receive 10-days special paid leave Holiday Trading is a benefit that allows the majority of employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity Flexible working - we give people more options to better integrate their work and personal life, whilst ensuring that business needs are met. Flexible locations. Opportunity to work with innovative technology. Babcock International For over a century Babcock has helped to defend nations, protect communities and build a better world. To continue, we must adapt, advance and be a sustainable business with a shared goal. We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview. JBRP1_UKTJ
May 01, 2024
Full time
Job Title: Senior EC&I Engineer Location: Plymouth, Bristol or Rosyth + Hybrid Working Arrangements Compensation: Competitive + Benefits Role Type: Full time / Permanent Role ID: SF56968 At Babcock we're working to create a safe and secure world, together, and if you join us, you can play your part as a Senior EC&I Engineer at our Devonport, Rosyth, or Bristol site. The role Would you like to join a growing multi-disciplinary team within the Electrical Engineering Group (EEG) within Babcock Energy and Marine? We currently have several vacancies for Senior Electrical and Electronic Design Engineers at our sites in Plymouth, Bristol and Rosyth. As a Senior Electrical and Electronic Design Engineer, you will have the support of a large team of likeminded electrical and electronic engineers to give support to, and to learn and give support from; sharing best practice and enabling you to grow within your profession. Day to day, you'll be: Responsible for Electrical/Electronic aspects of marine system design Integrating practical electrical, electronic combat and automation product solutions not only within the same disciplines but defining the interfaces with others constructively and mechanically. Providing electrical & electronic design support by preparing and checking design documentation, reviews, estimates and schedules, also, in support of tender responses requiring design input. Supervising, planning and controlling work to time, cost and quality. Developing Electrical/Electronic engineering design solutions for a variety of different platforms across the full Engineering Lifecycle. This will include substantiating the integrity and performance of new system designs within their operating environments. This role is full time, 36 hours per week and provides hybrid working arrangements with 2 days in the office/onsite and 3 days working from home. Essential experience of the Senior EC&I Engineer: You will have a high level of developed knowledge as the role is directly accountable for design development, and determining solutions to problems and issues within the specialist subject area. The ideal candidate will be at a Senior Electrical/Electronic Design Engineer level with significant experience in engineering calculation, analysis and integration with an in-depth understanding of system electrical design, and skilled in supporting and developing less experienced team members. It would be beneficial if you have experience working on UK naval marine shipbuilding projects or defence related design experience but this is not essential. Electrical & Electronics experience in other industries would be considered including facilities, Oil & Gas and Aviation. Experience of operating in a defence or high safety integrity environment Experience of all phases of the engineering lifecycle and configuration control systems Qualifications for the Senior EC&I Engineer: Qualified to degree level, or HNC/HND equivalent, coupled with significant experience in the relevant engineering discipline. Ideally, you will be a member of a relevant institution (e.g. RINA, IET, IMechE, IMarEst etc.) and hold or working towards Chartered or Incorporated status or you will have significant demonstrable engineering experience and capable of registration with the Engineering Council at CEng level. Security Clearance The successful candidate must be able to achieve and maintain Security Check (SC) security clearance for this role. Many of the positions within our company are subject to national security clearance and Trade Control restrictions. This means that your eligibility for certain roles may be affected by your place of birth, nationality, current or former citizenship, and any residency you hold or have held. What we offer Generous holiday allowance Matched contribution pension scheme, with life assurance Employee share scheme Employee shopping savings portal Payment of Professional Fees Reservists in the armed forces receive 10-days special paid leave Holiday Trading is a benefit that allows the majority of employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity Flexible working - we give people more options to better integrate their work and personal life, whilst ensuring that business needs are met. Flexible locations. Opportunity to work with innovative technology. Babcock International For over a century Babcock has helped to defend nations, protect communities and build a better world. To continue, we must adapt, advance and be a sustainable business with a shared goal. We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview. JBRP1_UKTJ
An exciting opportunity at a well-established automotive company are looking for a design engineer to join their team. Based in Leicestershire, this company is a leading automotive manufacturer. As Senior Design Engineer will you be responsible for: The design and development of a number of automotive components such as powertrain and chassis systems. Contributing to project plans to ensure future deliverables are met. Using 3D CAD to create model, technical drawings and manufacturing drawings and surface modelling. Time management to ensure all project and KPIs are completed efficiently and to the highest quality. The successful Design Engineer will have: Proven experience as a Design Engineer or Mechanical Engineer. Qualified to degree level in either PhD, MSc, MA, MEng, BA, BEng or BSc Product Design, Mechanical Engineering, Product or Innovation Engineering. Experience in the design and development of automotive components. 3D CAD, ideally with surface modelling experience. A strong passion for personal development and automotive engineering. As a Design Engineer you will receive the following: Competitive Salary Competitive Pension scheme with scaling contribution levels Life Assurance Scheme Holiday entitlement with additional annual leave Opportunity for excellent progression If you would like to find out more about this Senior Design Engineering role, click the "APPLY NOW" button below and we'll be in touch. Please note: Any reference to salary or pay rates in this advertisement are indicative only and should only be used as a guide. JBRP1_UKTJ
May 01, 2024
Full time
An exciting opportunity at a well-established automotive company are looking for a design engineer to join their team. Based in Leicestershire, this company is a leading automotive manufacturer. As Senior Design Engineer will you be responsible for: The design and development of a number of automotive components such as powertrain and chassis systems. Contributing to project plans to ensure future deliverables are met. Using 3D CAD to create model, technical drawings and manufacturing drawings and surface modelling. Time management to ensure all project and KPIs are completed efficiently and to the highest quality. The successful Design Engineer will have: Proven experience as a Design Engineer or Mechanical Engineer. Qualified to degree level in either PhD, MSc, MA, MEng, BA, BEng or BSc Product Design, Mechanical Engineering, Product or Innovation Engineering. Experience in the design and development of automotive components. 3D CAD, ideally with surface modelling experience. A strong passion for personal development and automotive engineering. As a Design Engineer you will receive the following: Competitive Salary Competitive Pension scheme with scaling contribution levels Life Assurance Scheme Holiday entitlement with additional annual leave Opportunity for excellent progression If you would like to find out more about this Senior Design Engineering role, click the "APPLY NOW" button below and we'll be in touch. Please note: Any reference to salary or pay rates in this advertisement are indicative only and should only be used as a guide. JBRP1_UKTJ
Who are we? At Vertiv, we're pioneers in critical infrastructure solutions, shaping the future of 5G and Edge technologies globally. We're building an exceptional team in UK, London and we're inviting YOU to be part of this exciting journey as a IT Solutions Architect! Job Overview: We are seeking a dynamic and multidisciplinary Data Centre Solutions Architect to join our expanding team. You will play a pivotal role in designing, developing, and delivering cutting-edge data centre solutions in IT space for our clients across various industries. Your Core Responsibilities: Consult with clients: Understand their IT infrastructure needs, challenges, and business objectives. Analyse requirements and translate them into tailored data centre solutions. Solution design: Leverage your deep understanding of white space, power, cooling, thermal management, and the latest IT/data centre technologies to create robust and scalable solutions. Technology expertise: Recommend and implement best-in-class hardware, software, and infrastructure solutions, ensuring alignment with industry standards and best practices (EN50600, Uptime Institute's Tier Certification, C-Net's CDCDP or equivalent). Presentation & communication: Clearly present complex technical concepts to diverse audiences, including clients, internal teams, senior management, consultants, and partners. Networking and collaboration: Build and maintain strong relationships with internal and external stakeholders, actively seeking new opportunities and partnerships. Play active role in defining solution gaps; collaborate with regional and global offering team to improve and launch new solutions. In order to be successful in this role you will need to have: Minimum 5 years' experience as a Solutions Architect, Systems Engineer, Sales Engineer, or similar role in the data centre industry. Proven track record of success in designing, implementing, and managing data centre projects. Use of design tools, like AutoCAD, Revit or similar is welcome. Deep understanding of data centre concepts, including white space, power, cooling, thermal management, and latest IT infrastructure technology (OPC, GenAI, Blockchain). Bachelor's degree in engineering (mechanical, electrical, telecommunication, computer systems) preferred. Fluency in English and a second language is preferred (German, Italian, Spanish, French). Proven strong knowledge of industry standards and best practices (EN50600, Uptime Institute's Data Centre Tier Certification, C-Net's CDCDP or equivalent). Excellent communication, presentation, and interpersonal skills. Benefits: Competitive salary and benefits package. Opportunity to work with cutting-edge technologies and innovative projects. Dynamic and collaborative work environment. Career growth and development opportunities. If YOU are ready to contribute to a thriving and evolving environment, seize the opportunity and apply now! Let's shape your future career together at Vertiv.
May 01, 2024
Full time
Who are we? At Vertiv, we're pioneers in critical infrastructure solutions, shaping the future of 5G and Edge technologies globally. We're building an exceptional team in UK, London and we're inviting YOU to be part of this exciting journey as a IT Solutions Architect! Job Overview: We are seeking a dynamic and multidisciplinary Data Centre Solutions Architect to join our expanding team. You will play a pivotal role in designing, developing, and delivering cutting-edge data centre solutions in IT space for our clients across various industries. Your Core Responsibilities: Consult with clients: Understand their IT infrastructure needs, challenges, and business objectives. Analyse requirements and translate them into tailored data centre solutions. Solution design: Leverage your deep understanding of white space, power, cooling, thermal management, and the latest IT/data centre technologies to create robust and scalable solutions. Technology expertise: Recommend and implement best-in-class hardware, software, and infrastructure solutions, ensuring alignment with industry standards and best practices (EN50600, Uptime Institute's Tier Certification, C-Net's CDCDP or equivalent). Presentation & communication: Clearly present complex technical concepts to diverse audiences, including clients, internal teams, senior management, consultants, and partners. Networking and collaboration: Build and maintain strong relationships with internal and external stakeholders, actively seeking new opportunities and partnerships. Play active role in defining solution gaps; collaborate with regional and global offering team to improve and launch new solutions. In order to be successful in this role you will need to have: Minimum 5 years' experience as a Solutions Architect, Systems Engineer, Sales Engineer, or similar role in the data centre industry. Proven track record of success in designing, implementing, and managing data centre projects. Use of design tools, like AutoCAD, Revit or similar is welcome. Deep understanding of data centre concepts, including white space, power, cooling, thermal management, and latest IT infrastructure technology (OPC, GenAI, Blockchain). Bachelor's degree in engineering (mechanical, electrical, telecommunication, computer systems) preferred. Fluency in English and a second language is preferred (German, Italian, Spanish, French). Proven strong knowledge of industry standards and best practices (EN50600, Uptime Institute's Data Centre Tier Certification, C-Net's CDCDP or equivalent). Excellent communication, presentation, and interpersonal skills. Benefits: Competitive salary and benefits package. Opportunity to work with cutting-edge technologies and innovative projects. Dynamic and collaborative work environment. Career growth and development opportunities. If YOU are ready to contribute to a thriving and evolving environment, seize the opportunity and apply now! Let's shape your future career together at Vertiv.
Are you an experienced Engineer, who has the ability to see the bigger picture, and apply your working knowledge of engineering, science and systems thinking to support unique and essential engineering projects at the heart of the UK's nuclear deterrent? If so, we could have a career for you. We are looking for motivated and experienced individuals to lead and apply Systems Engineering approaches to mechanical, electronic, processing, safety, security or nuclear projects and are interested in developing their career with us. The Warhead Systems Engineering Team provides the capability to design, coordinate, integrate and verify Nuclear Warheads and enabling systems to meet current, and potential future customer requirements. We manage the systems from cradle to grave taking consideration of safety, performance and through life maintenance while interfacing with the MoD and other strategic defence partners, while supporting AWE to deliver an integrated solution. Role: Principal & Senior Systems Engineers (Trident & Replacement Warhead) Location: Reading area (office based) Salary: £44,900 - £80,000 (dependant on experience) Closing date: 16th May 2024 The difference you'll make in these roles: Leading on the delivery of requirements, conceptual designs, detail designs, manufacturing specifications, operational documentation and validation evidence for engineering solutions across multiple lifecycle phases Leading and managing stakeholder partnerships Supporting the training and development of less experienced engineers through formal and informal mentoring Applying the behaviours of a systems thinker to solve complex problems and implement constructive change The key skills & experience you'll bring: HNC/HND or degree qualification in a science or engineering discipline or proven experience working in a similar environment Proven experience of delivering engineering projects with a consideration for quality, time, and cost Strong analytical and problem-solving skills Strong communication and exceptional soft skills to work with people and teams to both discover and share key information We have a range of roles available across engineering, and below is a brief summary of some of our opportunities: Trident - Responsible for warhead life-cycle management of our in-service Trident deterrent. This includes the assurance of the continual health of system; determining and collecting vital surveillance evidence; assessing the impacts and introduction of new design modifications; maintaining the quality of new product; and supporting the wider boat programme and CASD. Replacement Warhead - Responsible for realising an effective future system design. This includes the early system-life-cycle context and requirement derivation and maturation that will underpin the system design; generating and maturing system design options; and defining and burning down verification risk across all products. Warhead Engineering are committed to investing in your development through mentoring, coaching and support, to enable you to develop and grow in role. Candidates must be willing and able to obtain and maintain the security clearance required for the role and be willing and able to travel within the UK and overseas as required. As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and well-being - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration JBRP1_UKTJ
May 01, 2024
Full time
Are you an experienced Engineer, who has the ability to see the bigger picture, and apply your working knowledge of engineering, science and systems thinking to support unique and essential engineering projects at the heart of the UK's nuclear deterrent? If so, we could have a career for you. We are looking for motivated and experienced individuals to lead and apply Systems Engineering approaches to mechanical, electronic, processing, safety, security or nuclear projects and are interested in developing their career with us. The Warhead Systems Engineering Team provides the capability to design, coordinate, integrate and verify Nuclear Warheads and enabling systems to meet current, and potential future customer requirements. We manage the systems from cradle to grave taking consideration of safety, performance and through life maintenance while interfacing with the MoD and other strategic defence partners, while supporting AWE to deliver an integrated solution. Role: Principal & Senior Systems Engineers (Trident & Replacement Warhead) Location: Reading area (office based) Salary: £44,900 - £80,000 (dependant on experience) Closing date: 16th May 2024 The difference you'll make in these roles: Leading on the delivery of requirements, conceptual designs, detail designs, manufacturing specifications, operational documentation and validation evidence for engineering solutions across multiple lifecycle phases Leading and managing stakeholder partnerships Supporting the training and development of less experienced engineers through formal and informal mentoring Applying the behaviours of a systems thinker to solve complex problems and implement constructive change The key skills & experience you'll bring: HNC/HND or degree qualification in a science or engineering discipline or proven experience working in a similar environment Proven experience of delivering engineering projects with a consideration for quality, time, and cost Strong analytical and problem-solving skills Strong communication and exceptional soft skills to work with people and teams to both discover and share key information We have a range of roles available across engineering, and below is a brief summary of some of our opportunities: Trident - Responsible for warhead life-cycle management of our in-service Trident deterrent. This includes the assurance of the continual health of system; determining and collecting vital surveillance evidence; assessing the impacts and introduction of new design modifications; maintaining the quality of new product; and supporting the wider boat programme and CASD. Replacement Warhead - Responsible for realising an effective future system design. This includes the early system-life-cycle context and requirement derivation and maturation that will underpin the system design; generating and maturing system design options; and defining and burning down verification risk across all products. Warhead Engineering are committed to investing in your development through mentoring, coaching and support, to enable you to develop and grow in role. Candidates must be willing and able to obtain and maintain the security clearance required for the role and be willing and able to travel within the UK and overseas as required. As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and well-being - more information available on our careers site Relocation package available (terms and conditions apply) Potential opportunities to travel with work for conferences and collaboration JBRP1_UKTJ
Senior Electrical Project Engineer Are you currently an Electrical Project Engineer seeking a new opportunity where you can work with one of the largest Contractors working on exciting projects throughout the region? You will be joining the team in the North East, focusing on high profile, technically complex mechanical and electrical projects across multiple sectors. If you are passionate about the engineering aspects of Construction and are looking for an opportunity to challenge the norm this is a great opportunity to progress your career as part of a talented, diverse, and supportive team. About The Role The Project Engineers are a valuable part of the business. The focus of this role will be to manage the technical correctness of project progression, supervising the supply and co-ordination of all technical information, including Health and Safety information. As the Project Engineer you will: Be responsible for the electrical services installation on projects from design through to Smart Landings. Work with the BIM department to assist and produce fully coordinated installation drawings to a standard which allows clear direction for site installation or production of offsite manufacturing. Deliver a quality installation, in line with our client's expectations, maximising the profitability by smart design and early selection, driving our cost whilst maintaining our standards. Work with the planner to have a clear sequence of works with defined durations and resource loaded that is agreed with our client. What's on offer Competitive salary & profit share scheme Flexible working Car Allowance / Company Car (subject to Role/Grade) Travel covered to any of our sites (subject to HMRC advisory rates) Extensive corporate benefits including, Private Medical, Pension 6% employers' contribution, Health and Wellness programme, 26 days holidays + bank holidays and other company wide benefits with leading maternity and paternity pay. What to do next If you are looking for a new opportunity and this role is of interest, please apply via the link below or contact Adam at Fawkes & Reece on , or send through your CV to .
May 01, 2024
Full time
Senior Electrical Project Engineer Are you currently an Electrical Project Engineer seeking a new opportunity where you can work with one of the largest Contractors working on exciting projects throughout the region? You will be joining the team in the North East, focusing on high profile, technically complex mechanical and electrical projects across multiple sectors. If you are passionate about the engineering aspects of Construction and are looking for an opportunity to challenge the norm this is a great opportunity to progress your career as part of a talented, diverse, and supportive team. About The Role The Project Engineers are a valuable part of the business. The focus of this role will be to manage the technical correctness of project progression, supervising the supply and co-ordination of all technical information, including Health and Safety information. As the Project Engineer you will: Be responsible for the electrical services installation on projects from design through to Smart Landings. Work with the BIM department to assist and produce fully coordinated installation drawings to a standard which allows clear direction for site installation or production of offsite manufacturing. Deliver a quality installation, in line with our client's expectations, maximising the profitability by smart design and early selection, driving our cost whilst maintaining our standards. Work with the planner to have a clear sequence of works with defined durations and resource loaded that is agreed with our client. What's on offer Competitive salary & profit share scheme Flexible working Car Allowance / Company Car (subject to Role/Grade) Travel covered to any of our sites (subject to HMRC advisory rates) Extensive corporate benefits including, Private Medical, Pension 6% employers' contribution, Health and Wellness programme, 26 days holidays + bank holidays and other company wide benefits with leading maternity and paternity pay. What to do next If you are looking for a new opportunity and this role is of interest, please apply via the link below or contact Adam at Fawkes & Reece on , or send through your CV to .
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs. Key Responsibilities Support in test activities across all hot fire and environmental test facilities. Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety. Develop test, maintenance, and setup procedures for all test activities. Requirements Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the
May 01, 2024
Full time
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs. Key Responsibilities Support in test activities across all hot fire and environmental test facilities. Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety. Develop test, maintenance, and setup procedures for all test activities. Requirements Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the
Do you have a passion for root cause analysis and risk mitigation strategies that identify and drive improvements to facilities and operations making them more resilient against disasters? Do you thrive in team-based environments that challenge the status quo to drive improvement? Amazon's Global Realty (GR) Risk Operations & Resilience (ROR) organization is seeking a technical professional to lead root cause analysis and related building and engineering-based investigations following disaster events. As part of the Disaster Recovery & Investigations (DRI) team, you will use your technical and problem-solving skills to uncover root causes, identify and drive corrective and preventative actions back to the business and design teams for closed-loop learning. The position will be based in Europe (EU), with regular travel to disaster sites throughout the UK and EU, and occasional travel to the US. This role can be based in London, Paris, UK, or Luxemburg. You will support a wide range of business units within Operations, including fulfillment centers, distribution centers, delivery stations and similar industrial warehouse occupancy. You will partner closely with many stakeholders, including Legal, Global Security, Risk Management, Design & Construction, Engineering, and Building Design to identify and capture opportunities for improvement. Due to the nature of supporting unplanned events on-site applicant should be in close proximity to transit (air and rail) with the ability to travel regularly to Luxembourg and London to meet with stakeholders. The person in this role will participate in on-call rotations (including after hours, weekends, and holidays) for emergency response support. The role requires travel up to 40% within the 13 countries, with focus on the U.K., Poland, France, Spain, and Germany on short notice. Key job responsibilities Role & Responsibilities: • Participate on rotational Global Security calls with operational leaders to provide guidance on when an investigation will be launched and how to secure or preserve the scene. • Lead root cause investigations, including travel to disasters impacting Amazon facilities, where you will deploy and manage forensic experts with evidence identification, preservation, and chain of custody, while preserving legal protections and subrogation rights and drive the investigation process until origin and cause are determined. • Partner closely with legal, risk and asset management to validate contractual obligations, and coordinate investigation activities with insurance representatives and counter-parties who have a contractual, financial, or potential liable interest throughout the investigation. • Partner with the DRI-team to provide daily verbal and written updates to senior leadership throughout an on-site investigation via flash reports and playbook/action tracker updates. • Solve problems with urgency by building consensus with partner teams, asking the right questions and recommending appropriate solutions. • Consolidate key learnings into a written closing report that includes corrective and preventative actions (CAPAs) to building system design, storage practices, and/or safety programs. • Identify owners, secure buy-in, and track agreed CAPAs until completion. • Support risk management, real estate, legal and the business on financial recoveries, litigation, or subrogation. • Identify network risk trends and near misses using 8D, 5-Whys, or similar to develop risk reduction options. • Provide written inputs to monthly/quarterly business reviews and lead investigations meetings with core stakeholders to surface broader insights. • Support DRI as an internal subject matter expert related to damage assessment methodologies for buildings, structures, material handling, and/or inventory damaged by fires, floods, and other physical disasters. We are open to hiring candidates to work out of one of the following locations: London, GBR BASIC QUALIFICATIONS • Bachelor's degree or equivalent credentials in Engineering, Technical Architecture, or similar. • Extensive years' work experience related to disaster-related commercial/industrial facility investigations and/or reconstruction. • Professional Engineers (PE or PEng) license, Master of Science (MS) or advanced engineering/technical degree or credentials, preferably in Fire Protection, Mechanical, Civil/Structural, or Construction Management. • Field experience within construction management, plan review, engineering inspections or similar. • Knowledge and experience working with fire and building codes and standards, including NFPA, FM Global, VdS, ICPE, BS, IndBauRL, RSCIEI etc., including interpretation and utilization/audit of design, installation, and maintenance. • Working experience with National Fire Protection Association (NFPA 921), NFPA13, FM Global Data Sheet 7-29, and 7-31, and IEC standards. • Working knowledge of standard lease language, property insurance contracts, construction/development agreements, or similar. PREFERRED QUALIFICATIONS • Proven ability to ask probing questions across building infrastructure and technical matters. • Strong verbal and written communication skills, with ability to communicate appropriately in privileged work, while fostering collaboration to unblock investigation progress and reconstruction work. • Highly analytical, detail oriented, with ability to develop new ideas and creative solutions. • Strong quantitative and qualitative analytical skills as well as good business judgment. Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice () to know more about how we collect, use and transfer the personal data of our candidates. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need an adjustment during the application and hiring process, including support for the interview or onboarding process, please contact the Applicant-Candidate Accommodation Team (ACAT), Monday through Friday from 7:00 am GMT - 4:00 pm GMT. If calling directly from the United Kingdom, please dial (tel:). If calling from Ireland, please dial (tel:).
May 01, 2024
Full time
Do you have a passion for root cause analysis and risk mitigation strategies that identify and drive improvements to facilities and operations making them more resilient against disasters? Do you thrive in team-based environments that challenge the status quo to drive improvement? Amazon's Global Realty (GR) Risk Operations & Resilience (ROR) organization is seeking a technical professional to lead root cause analysis and related building and engineering-based investigations following disaster events. As part of the Disaster Recovery & Investigations (DRI) team, you will use your technical and problem-solving skills to uncover root causes, identify and drive corrective and preventative actions back to the business and design teams for closed-loop learning. The position will be based in Europe (EU), with regular travel to disaster sites throughout the UK and EU, and occasional travel to the US. This role can be based in London, Paris, UK, or Luxemburg. You will support a wide range of business units within Operations, including fulfillment centers, distribution centers, delivery stations and similar industrial warehouse occupancy. You will partner closely with many stakeholders, including Legal, Global Security, Risk Management, Design & Construction, Engineering, and Building Design to identify and capture opportunities for improvement. Due to the nature of supporting unplanned events on-site applicant should be in close proximity to transit (air and rail) with the ability to travel regularly to Luxembourg and London to meet with stakeholders. The person in this role will participate in on-call rotations (including after hours, weekends, and holidays) for emergency response support. The role requires travel up to 40% within the 13 countries, with focus on the U.K., Poland, France, Spain, and Germany on short notice. Key job responsibilities Role & Responsibilities: • Participate on rotational Global Security calls with operational leaders to provide guidance on when an investigation will be launched and how to secure or preserve the scene. • Lead root cause investigations, including travel to disasters impacting Amazon facilities, where you will deploy and manage forensic experts with evidence identification, preservation, and chain of custody, while preserving legal protections and subrogation rights and drive the investigation process until origin and cause are determined. • Partner closely with legal, risk and asset management to validate contractual obligations, and coordinate investigation activities with insurance representatives and counter-parties who have a contractual, financial, or potential liable interest throughout the investigation. • Partner with the DRI-team to provide daily verbal and written updates to senior leadership throughout an on-site investigation via flash reports and playbook/action tracker updates. • Solve problems with urgency by building consensus with partner teams, asking the right questions and recommending appropriate solutions. • Consolidate key learnings into a written closing report that includes corrective and preventative actions (CAPAs) to building system design, storage practices, and/or safety programs. • Identify owners, secure buy-in, and track agreed CAPAs until completion. • Support risk management, real estate, legal and the business on financial recoveries, litigation, or subrogation. • Identify network risk trends and near misses using 8D, 5-Whys, or similar to develop risk reduction options. • Provide written inputs to monthly/quarterly business reviews and lead investigations meetings with core stakeholders to surface broader insights. • Support DRI as an internal subject matter expert related to damage assessment methodologies for buildings, structures, material handling, and/or inventory damaged by fires, floods, and other physical disasters. We are open to hiring candidates to work out of one of the following locations: London, GBR BASIC QUALIFICATIONS • Bachelor's degree or equivalent credentials in Engineering, Technical Architecture, or similar. • Extensive years' work experience related to disaster-related commercial/industrial facility investigations and/or reconstruction. • Professional Engineers (PE or PEng) license, Master of Science (MS) or advanced engineering/technical degree or credentials, preferably in Fire Protection, Mechanical, Civil/Structural, or Construction Management. • Field experience within construction management, plan review, engineering inspections or similar. • Knowledge and experience working with fire and building codes and standards, including NFPA, FM Global, VdS, ICPE, BS, IndBauRL, RSCIEI etc., including interpretation and utilization/audit of design, installation, and maintenance. • Working experience with National Fire Protection Association (NFPA 921), NFPA13, FM Global Data Sheet 7-29, and 7-31, and IEC standards. • Working knowledge of standard lease language, property insurance contracts, construction/development agreements, or similar. PREFERRED QUALIFICATIONS • Proven ability to ask probing questions across building infrastructure and technical matters. • Strong verbal and written communication skills, with ability to communicate appropriately in privileged work, while fostering collaboration to unblock investigation progress and reconstruction work. • Highly analytical, detail oriented, with ability to develop new ideas and creative solutions. • Strong quantitative and qualitative analytical skills as well as good business judgment. Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice () to know more about how we collect, use and transfer the personal data of our candidates. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need an adjustment during the application and hiring process, including support for the interview or onboarding process, please contact the Applicant-Candidate Accommodation Team (ACAT), Monday through Friday from 7:00 am GMT - 4:00 pm GMT. If calling directly from the United Kingdom, please dial (tel:). If calling from Ireland, please dial (tel:).
Perenco is a leading independent Oil & Gas Company operating across the globe. This unique opportunity is available in our UK subsidiary which manages onshore and offshore operations in the Southern North Sea. We are looking for a dynamic and highly motivated individual to be a senior member of our Integrity team based in Norwich. This position contributes to, and is responsible for, the technical management of the structural integrity assurance and regulatory compliance of offshore and onshore assets. The primary aspect of the role is to support and manage integrity assurance and engineering assessments with regards to asset structural integrity, regulatory compliance, performance, people and costs on behalf of Perenco UK. This role supports the specific goal of ensuring Perenco UK's structural assets remain fit for purpose until the projected end of field life. You will need an in-depth understanding of offshore structural engineering, recognition of defects and anomalies and the ability to engineer remedial actions as necessary. Consequently, a solid understanding of structural engineering principles ie Stability, Load Paths etc is essential coupled with working knowledge of corrosion mechanisms. This role is based in our Norwich Office with the requirement to travel offshore periodically. You will report directly to the Structural Team Lead/Technical Authority for PUK Structures. Key Responsibilities Include: Managing and Running Perenco's Structural Integrity Management Strategy (SIMS) which will include: • Carrying out Peer reviews and assessments on structural inspections for topside and subsea-updating and checking Written Schemes of Examination and Inspection Frequencies using a Risk Based Approach. • Maintaining Safety Critical Elements in accordance with Performance Standards • Have a knowledge of Corrosion, Associated Damage Mechanisms and Inspection techniques to detect and investigate. • Generate, specify and overview Repair Orders and Fabric Maintenance Recommendations in terms of scope and suitable timeframes. This will include the generation of supporting Structural Calculations for the required repair. • Be responsible for the management of o Weight database for all offshore installations o Assessments for lifting and temporary loads. o Air Gap and Tilt Surveys in accordance with the Structural Inspection Strategy o Offshore assets and onshore Terminals in assessing day-to-day safety issues. o Safety Case Maintenance • Be accountable for the development of information to support the Annual Summary Report ASR for all PUK Assets. • Overview and manage the development, construction and management of structural models and analyses in accordance with latest API's, ISO's or any other appropriate codes of practice, in the performance of relevant life extension assessments where required, and as directed. • Act as a 'focal point' for Discipline Engineers and in direct support of line management • Knowledge of Regulatory Bodies and Requirements is required in order to fulfil required liaisons with HSEx for technical discussion, audits and any consents and licences for new and existing facilities. • Be capable of taking full responsibility of the Structural Team when delegated and in Technical Authorities absence. Key Requirements Include: Qualifications: • Further education degree (BSc or BEng) in Civil / Structural / Mechanical Engineering. • Working towards or already have professional membership of an appropriate Institute (ICE, IStructE or IMechE) and Chartered status. Experience & Attributes: • You should ideally have 6-8 years' experience working as a Structural Engineer dealing with structural integrity (topside and submerged sections) of mature offshore fixed platforms together with a good grounding in the application of API (RP2A), ISO 19901's or other pertinent design codes. • Candidates with equivalent structural engineering experience and a passion for steelwork structures in challenging environments will be considered. • Very good communication skills are required in order to provide timely and appropriate feedback to team members and operational personnel in the carrying out of the described duties. Benefits At Perenco we value and reward our people, offering competitive salaries and a wide range of benefits including: • Life Assurance • Private Medical Insurance • Flexible Benefit Allowance • Defined Contribution Pension • Discretionary Bonus • Flex Days • 25 days holiday + bank holidays • Profit Share 'Units' Scheme
May 01, 2024
Full time
Perenco is a leading independent Oil & Gas Company operating across the globe. This unique opportunity is available in our UK subsidiary which manages onshore and offshore operations in the Southern North Sea. We are looking for a dynamic and highly motivated individual to be a senior member of our Integrity team based in Norwich. This position contributes to, and is responsible for, the technical management of the structural integrity assurance and regulatory compliance of offshore and onshore assets. The primary aspect of the role is to support and manage integrity assurance and engineering assessments with regards to asset structural integrity, regulatory compliance, performance, people and costs on behalf of Perenco UK. This role supports the specific goal of ensuring Perenco UK's structural assets remain fit for purpose until the projected end of field life. You will need an in-depth understanding of offshore structural engineering, recognition of defects and anomalies and the ability to engineer remedial actions as necessary. Consequently, a solid understanding of structural engineering principles ie Stability, Load Paths etc is essential coupled with working knowledge of corrosion mechanisms. This role is based in our Norwich Office with the requirement to travel offshore periodically. You will report directly to the Structural Team Lead/Technical Authority for PUK Structures. Key Responsibilities Include: Managing and Running Perenco's Structural Integrity Management Strategy (SIMS) which will include: • Carrying out Peer reviews and assessments on structural inspections for topside and subsea-updating and checking Written Schemes of Examination and Inspection Frequencies using a Risk Based Approach. • Maintaining Safety Critical Elements in accordance with Performance Standards • Have a knowledge of Corrosion, Associated Damage Mechanisms and Inspection techniques to detect and investigate. • Generate, specify and overview Repair Orders and Fabric Maintenance Recommendations in terms of scope and suitable timeframes. This will include the generation of supporting Structural Calculations for the required repair. • Be responsible for the management of o Weight database for all offshore installations o Assessments for lifting and temporary loads. o Air Gap and Tilt Surveys in accordance with the Structural Inspection Strategy o Offshore assets and onshore Terminals in assessing day-to-day safety issues. o Safety Case Maintenance • Be accountable for the development of information to support the Annual Summary Report ASR for all PUK Assets. • Overview and manage the development, construction and management of structural models and analyses in accordance with latest API's, ISO's or any other appropriate codes of practice, in the performance of relevant life extension assessments where required, and as directed. • Act as a 'focal point' for Discipline Engineers and in direct support of line management • Knowledge of Regulatory Bodies and Requirements is required in order to fulfil required liaisons with HSEx for technical discussion, audits and any consents and licences for new and existing facilities. • Be capable of taking full responsibility of the Structural Team when delegated and in Technical Authorities absence. Key Requirements Include: Qualifications: • Further education degree (BSc or BEng) in Civil / Structural / Mechanical Engineering. • Working towards or already have professional membership of an appropriate Institute (ICE, IStructE or IMechE) and Chartered status. Experience & Attributes: • You should ideally have 6-8 years' experience working as a Structural Engineer dealing with structural integrity (topside and submerged sections) of mature offshore fixed platforms together with a good grounding in the application of API (RP2A), ISO 19901's or other pertinent design codes. • Candidates with equivalent structural engineering experience and a passion for steelwork structures in challenging environments will be considered. • Very good communication skills are required in order to provide timely and appropriate feedback to team members and operational personnel in the carrying out of the described duties. Benefits At Perenco we value and reward our people, offering competitive salaries and a wide range of benefits including: • Life Assurance • Private Medical Insurance • Flexible Benefit Allowance • Defined Contribution Pension • Discretionary Bonus • Flex Days • 25 days holiday + bank holidays • Profit Share 'Units' Scheme
Senior Mechanical Engineer Salary Negotiable DOE Dover Working Week / Hours 37.5 My client who connects trade, travel, visitors, and communities locally-globally, collaborating with local and international partners to create a more seamless, smart, sustainable, and tech-enabled port. As an international ferry port and a vital gateway for the movement of people and trade, they handle £144 billion of trade per year, 33% of UK trade in goods with the EU and welcomes millions of passengers. Every trade, travel and visitor experience is an opportunity for connection and exchange. Our operation requires a dedicated team of people working in a diverse range of roles. We are committed to developing the skills and industry knowledge of our employees to enhance performance and support the achievement of our business objectives. Job Summary We'd love to hear from you if you are passionate about playing a critical part in keeping the Port running smoothly. The Ports key mechanical assets range from hydraulic systems, cranes (gantry and mobile), winch drives, fender systems, mooring systems, berth and linkspan structures. Act as an internal consultant, undertaking mechanical design & assessments of both new and existing assets within the operational port environment. Develop the long term strategy for maintenance and replacement, and lead on reliability assessments. Monitor compliance standards in line with legislative requirements and/or best practice, auditing inspections and tests to ensure the required standards are met. Oversee the mechanical inspection regime, reporting on inspection findings, and applying your critical judgement to recommend an efficient programme of maintenance and repairs to be undertaken by external contractors or the in-house Engineering team. Make recommendations for the adoption of innovative approaches to achieve improvements to reliability and sustainability. Support other team members of the in-house Engineering team by reviewing and commenting on design drawings and specifications. Prepare technical guidance for the business, providing support and guidance to both technical and non-technical audiences, to ensure safe use of the Ports assets. Skills and Qualifications BEng/Meng (or equivalent) in appropriate Mechanical or similar discipline Chartered or incorporated membership with the Institute of Mechanical Engineers (IMechE) or working towards this is desirable Extensive post-graduation experience of undertaking mechanical designs and calculations Experience undertaking feasibility studies, design, assessments and specifications for mechanical engineering works Effective communication to technical and non-technical audiences. Understanding of CDM regulations Hold a valid UK driving licence Benefits: 5 weeks annual leave + bank holidays (pro rata) Generous contributory pension scheme Discretionary annual bonus scheme Private Health Care Life assurance Employee assistance programme 3rd party discounts Cycle to work scheme Benefits and reward platform Free Parking Employee volunteering scheme All offers of employment are subject to us obtaining satisfactory references (covering all education, training, employment and unemployment in the preceding 5 years) and there will be a pre-employment medical including a Drug and Alcohol test. We need to satisfy your Right to Work in the UK. Please be aware that all employees will be subject to background security checks in order to obtain a Dock Pass. We value the unique differences that each of our colleagues bring to work every day and are committed to creating an environment where everyone is looking after each other and respected, included and able to perform at their best. We are happy to discuss flexible working where possible. Interpersonnel Recruitment is operating as an Employment Agency for our client for this particular role. By applying you give consent for your data to be handled and processed under GDPR Legislation for the purpose of your current employment search We are pleased to receive a significant number of applications for most roles advertised. We are therefore unable to respond to individual applicants unless shortlisted. If you have not been contacted within four weeks of the closing date you should assume you have not been shortlisted on this occasion. Interpersonnel is an equal opportunities employer. All our current vacancies are on our website JBRP1_UKTJ
May 01, 2024
Full time
Senior Mechanical Engineer Salary Negotiable DOE Dover Working Week / Hours 37.5 My client who connects trade, travel, visitors, and communities locally-globally, collaborating with local and international partners to create a more seamless, smart, sustainable, and tech-enabled port. As an international ferry port and a vital gateway for the movement of people and trade, they handle £144 billion of trade per year, 33% of UK trade in goods with the EU and welcomes millions of passengers. Every trade, travel and visitor experience is an opportunity for connection and exchange. Our operation requires a dedicated team of people working in a diverse range of roles. We are committed to developing the skills and industry knowledge of our employees to enhance performance and support the achievement of our business objectives. Job Summary We'd love to hear from you if you are passionate about playing a critical part in keeping the Port running smoothly. The Ports key mechanical assets range from hydraulic systems, cranes (gantry and mobile), winch drives, fender systems, mooring systems, berth and linkspan structures. Act as an internal consultant, undertaking mechanical design & assessments of both new and existing assets within the operational port environment. Develop the long term strategy for maintenance and replacement, and lead on reliability assessments. Monitor compliance standards in line with legislative requirements and/or best practice, auditing inspections and tests to ensure the required standards are met. Oversee the mechanical inspection regime, reporting on inspection findings, and applying your critical judgement to recommend an efficient programme of maintenance and repairs to be undertaken by external contractors or the in-house Engineering team. Make recommendations for the adoption of innovative approaches to achieve improvements to reliability and sustainability. Support other team members of the in-house Engineering team by reviewing and commenting on design drawings and specifications. Prepare technical guidance for the business, providing support and guidance to both technical and non-technical audiences, to ensure safe use of the Ports assets. Skills and Qualifications BEng/Meng (or equivalent) in appropriate Mechanical or similar discipline Chartered or incorporated membership with the Institute of Mechanical Engineers (IMechE) or working towards this is desirable Extensive post-graduation experience of undertaking mechanical designs and calculations Experience undertaking feasibility studies, design, assessments and specifications for mechanical engineering works Effective communication to technical and non-technical audiences. Understanding of CDM regulations Hold a valid UK driving licence Benefits: 5 weeks annual leave + bank holidays (pro rata) Generous contributory pension scheme Discretionary annual bonus scheme Private Health Care Life assurance Employee assistance programme 3rd party discounts Cycle to work scheme Benefits and reward platform Free Parking Employee volunteering scheme All offers of employment are subject to us obtaining satisfactory references (covering all education, training, employment and unemployment in the preceding 5 years) and there will be a pre-employment medical including a Drug and Alcohol test. We need to satisfy your Right to Work in the UK. Please be aware that all employees will be subject to background security checks in order to obtain a Dock Pass. We value the unique differences that each of our colleagues bring to work every day and are committed to creating an environment where everyone is looking after each other and respected, included and able to perform at their best. We are happy to discuss flexible working where possible. Interpersonnel Recruitment is operating as an Employment Agency for our client for this particular role. By applying you give consent for your data to be handled and processed under GDPR Legislation for the purpose of your current employment search We are pleased to receive a significant number of applications for most roles advertised. We are therefore unable to respond to individual applicants unless shortlisted. If you have not been contacted within four weeks of the closing date you should assume you have not been shortlisted on this occasion. Interpersonnel is an equal opportunities employer. All our current vacancies are on our website JBRP1_UKTJ
NES Fircroft are working with a large oil and gas operator who are looking for a Technical Safety Engineer to work with them in their Norwich Offices. Technical Safety Engineer 12-month contract, Norwich This unique opportunity is available in our UK subsidiary which is one of the largest gas operators in the Southern North Sea. This role is an integral part of our QSHE team and is responsible for the provision of safety engineering support to our SNS operation. Responsibilities include ensuring compliance with UK QSHE legislation, codes of practice, guidelines, industry standards and best practice. This is a full-time role based at our Norwich office, working Monday to Friday. Key Responsibilities include: Carry out competent in-house safety studies in support of operations and projects including but not limited to following: Chairing and facilitating safety studies such as Total Risk Management, HAZID, Bowtie, ALARP Development of Barrier Diagrams (Bowties) Consequence modelling using DNV GL PHAST or FLARESIM software is mandatory Mini Quantitative Risk Assessments (QRA) including Event and Fault Tree development Hazardous Area Classification Fire and Explosion Risk Assessment Preparing Safety Case Material Changes Conducting 5 yearly Thorough Reviews Knowledge in COMAH regulations is desirable Knowledge in Computational Fluid Dynamics Modelling is desirable Preparing the scope of requirements, commissioning, managing and reviewing technical safety studies from competent contractors in support of operations and projects including but not limited to following: QRA and Cost Benefit Analysis Escape, Evacuation and Rescue Assessment Probabilistic Explosion Assessment Quantitative/Qualitative Safety Critical System Impairment Assessment Occupied Building Risk Assessment (Good knowledge of HAZOP, SIL and LOPA is desirable.) Provide safety engineering support for Management of Change process (MOC) and identify the appropriate safety studies that should be completed. Engage with operations and projects to ensure that all necessary regulatory requirements and approved codes of practice are identified, permits obtained, and conditions complied with. Provide coaching, guidance and advice to operations, engineering and other support teams to ensure compliance with applicable legislation such as OSDR/SCR, PFEER, DSEAR, DCR, PSR and PSSR. Liaise with regulatory bodies on matters of HSE, understanding regulatory drivers and providing guidance to Perenco on matters of regulatory compliance. Maintain current in changes to HSE legislations, codes, guidelines and industry standards, Interpreting these. Provide support to others within the team to ensure requirements under Safety Case Regulations (SCR) are achieved, including maintenance of documentation up to date and providing support and input to the periodic reviews (i.e. SCR Thorough Review Programme). Identifying opportunities and efficiencies to improve overall QSHE standards and performance throughout the SNS Operation Safety & Environmentally Critical Tasks: SNS Technical Safety Engineer SNS Management of Change - Technical Reviewer. Review Management of Change (MOC) proposals via the eMOC system, address technical queries, ensure compliance with technical standards within the Process discipline and provide access to specialist engineering advice. SNS Operational Risk Assessment - Participant Safety & Environmentally Critical Courses: FLARESIM (Flare Modelling) Health & Safety Compliance (Inc. SECE) CBT PHA-Pro End User Phast Advanced Discharge Modelling Phast Advanced Dispersion and Toxic Modelling Phast Advanced Flammable Modelling Phast Software Introduction Risk Management - Bowtie Method Hazardous Area Classification Key Requirements: Higher technical qualification within engineering field e.g. Process Safety, Chemical or Mechanical is mandatory. Chartered in mechanical, chemical/process engineering is desirable 10+ years' experience in Safety Engineering in Oil & Gas Industry. Experience in both design and operation is desirable. Software knowledge MS Office (Word/Excel mandatory), PHAST, PHA-Pro, BowTie XP, FLARESIM Ability to prepare technical reports and letters, work to deadlines, organised and methodical. Ability to interact with Senior Management and regulatory bodies. Technically confident. To apply for this position, please forward your updated CV. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
May 01, 2024
Contractor
NES Fircroft are working with a large oil and gas operator who are looking for a Technical Safety Engineer to work with them in their Norwich Offices. Technical Safety Engineer 12-month contract, Norwich This unique opportunity is available in our UK subsidiary which is one of the largest gas operators in the Southern North Sea. This role is an integral part of our QSHE team and is responsible for the provision of safety engineering support to our SNS operation. Responsibilities include ensuring compliance with UK QSHE legislation, codes of practice, guidelines, industry standards and best practice. This is a full-time role based at our Norwich office, working Monday to Friday. Key Responsibilities include: Carry out competent in-house safety studies in support of operations and projects including but not limited to following: Chairing and facilitating safety studies such as Total Risk Management, HAZID, Bowtie, ALARP Development of Barrier Diagrams (Bowties) Consequence modelling using DNV GL PHAST or FLARESIM software is mandatory Mini Quantitative Risk Assessments (QRA) including Event and Fault Tree development Hazardous Area Classification Fire and Explosion Risk Assessment Preparing Safety Case Material Changes Conducting 5 yearly Thorough Reviews Knowledge in COMAH regulations is desirable Knowledge in Computational Fluid Dynamics Modelling is desirable Preparing the scope of requirements, commissioning, managing and reviewing technical safety studies from competent contractors in support of operations and projects including but not limited to following: QRA and Cost Benefit Analysis Escape, Evacuation and Rescue Assessment Probabilistic Explosion Assessment Quantitative/Qualitative Safety Critical System Impairment Assessment Occupied Building Risk Assessment (Good knowledge of HAZOP, SIL and LOPA is desirable.) Provide safety engineering support for Management of Change process (MOC) and identify the appropriate safety studies that should be completed. Engage with operations and projects to ensure that all necessary regulatory requirements and approved codes of practice are identified, permits obtained, and conditions complied with. Provide coaching, guidance and advice to operations, engineering and other support teams to ensure compliance with applicable legislation such as OSDR/SCR, PFEER, DSEAR, DCR, PSR and PSSR. Liaise with regulatory bodies on matters of HSE, understanding regulatory drivers and providing guidance to Perenco on matters of regulatory compliance. Maintain current in changes to HSE legislations, codes, guidelines and industry standards, Interpreting these. Provide support to others within the team to ensure requirements under Safety Case Regulations (SCR) are achieved, including maintenance of documentation up to date and providing support and input to the periodic reviews (i.e. SCR Thorough Review Programme). Identifying opportunities and efficiencies to improve overall QSHE standards and performance throughout the SNS Operation Safety & Environmentally Critical Tasks: SNS Technical Safety Engineer SNS Management of Change - Technical Reviewer. Review Management of Change (MOC) proposals via the eMOC system, address technical queries, ensure compliance with technical standards within the Process discipline and provide access to specialist engineering advice. SNS Operational Risk Assessment - Participant Safety & Environmentally Critical Courses: FLARESIM (Flare Modelling) Health & Safety Compliance (Inc. SECE) CBT PHA-Pro End User Phast Advanced Discharge Modelling Phast Advanced Dispersion and Toxic Modelling Phast Advanced Flammable Modelling Phast Software Introduction Risk Management - Bowtie Method Hazardous Area Classification Key Requirements: Higher technical qualification within engineering field e.g. Process Safety, Chemical or Mechanical is mandatory. Chartered in mechanical, chemical/process engineering is desirable 10+ years' experience in Safety Engineering in Oil & Gas Industry. Experience in both design and operation is desirable. Software knowledge MS Office (Word/Excel mandatory), PHAST, PHA-Pro, BowTie XP, FLARESIM Ability to prepare technical reports and letters, work to deadlines, organised and methodical. Ability to interact with Senior Management and regulatory bodies. Technically confident. To apply for this position, please forward your updated CV. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Senior Integrity Engineer Structures Our client, a leading independent Oil & Gas operator, based in Norwich, is currently seeking a Senior Integrity Engineer Structures to join our clients Integrity team. This is a full-time permanent position, based in Norwich with the requirement to travel offshore periodically. You will report directly to the Structural Team Lead/Technical Authority for Structures. Qualifications: Further Education Degree (BSc or BEng) in Civil / Structural / Mechanical Engineering. Working towards or already have professional membership of an appropriate Institute (ICE, IStructE or IMechE) and Chartered status. Experience & Attributes: Candidates should ideally have 6-8 years experience working as a Structural Engineer dealing with structural integrity (topside and submerged sections) of mature offshore fixed platforms together with a good grounding in the application of API (RP2A), ISO 19901s or other pertinent design codes. Candidates with equivalent structural engineering experience and a passion for steelwork structures in challenging environments will be considered. Applications must possess good communication skills are required in order to provide timely and appropriate feedback to team members and operational personnel in the carrying out of the described duties. This position contributes to and is responsible for, the technical management of the structural integrity assurance and regulatory compliance of offshore and onshore assets. The primary aspect of the role is to support and manage integrity assurance and engineering assessments about asset structural integrity, regulatory compliance, performance, people and costs on behalf of our client. This role supports the specific goal of ensuring structural assets remain fit for purpose until the projected end of field life. You will need an in-depth understanding of offshore structural engineering, recognition of defects and anomalies and the ability to engineer remedial actions as necessary. Consequently, a solid understanding of structural engineering principles ie Stability, Load Paths etc is essential coupled with working knowledge of corrosion mechanisms. Key Responsibilities Include: Managing and running our client's Structural Integrity Management Strategy (SIMS) which will include: Carrying out Peer reviews and assessments on structural inspections for topside and subsea-updating and checking Written Schemes of Examination and Inspection Frequencies using a Risk-Based Approach. Maintaining Safety Critical Elements in accordance with Performance Standards Have a knowledge of Corrosion, Associated Damage Mechanisms and Inspection techniques to detect and investigate. Generate, specify and overview Repair Orders and Fabric Maintenance Recommendations in terms of scope and suitable timeframes. This will include the generation of supporting Structural Calculations for the required repair. Be responsible for the management of: Weight database for all offshore installations Assessments for lifting and temporary loads. Air Gap and Tilt Surveys in accordance with the Structural Inspection Strategy Offshore assets and onshore Terminals in assessing day-to-day safety issues. Safety Case Maintenance Be accountable for the development of information to support the Annual Summary Report ASR for all Assets. Overview and manage the development, construction and management of structural models and analyses in accordance with latest APIs, ISOs or any other appropriate codes of practice, in the performance of relevant life extension assessments where required, and as directed. Act as a focal point for Discipline Engineers and in direct support of line management. Knowledge of Regulatory Bodies and Requirements is required to fulfil required liaisons with HSEx for technical discussion, audits and any consents and licences for new and existing facilities. Be capable of taking full responsibility for the Structural Team when delegated and in the Technical Authorities' absence. Benefits: Life Assurance Private Medical Insurance Flexible Benefit Allowance Defined Contribution Pension Discretionary Bonus Flex Days 25 days holiday + bank holidays Profit Share Units Scheme For further details regarding this exciting opportunity please forward a copy of your CV today! Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications, we receive Im afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. If we can take your application further, we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd JBRP1_UKTJ
May 01, 2024
Full time
Senior Integrity Engineer Structures Our client, a leading independent Oil & Gas operator, based in Norwich, is currently seeking a Senior Integrity Engineer Structures to join our clients Integrity team. This is a full-time permanent position, based in Norwich with the requirement to travel offshore periodically. You will report directly to the Structural Team Lead/Technical Authority for Structures. Qualifications: Further Education Degree (BSc or BEng) in Civil / Structural / Mechanical Engineering. Working towards or already have professional membership of an appropriate Institute (ICE, IStructE or IMechE) and Chartered status. Experience & Attributes: Candidates should ideally have 6-8 years experience working as a Structural Engineer dealing with structural integrity (topside and submerged sections) of mature offshore fixed platforms together with a good grounding in the application of API (RP2A), ISO 19901s or other pertinent design codes. Candidates with equivalent structural engineering experience and a passion for steelwork structures in challenging environments will be considered. Applications must possess good communication skills are required in order to provide timely and appropriate feedback to team members and operational personnel in the carrying out of the described duties. This position contributes to and is responsible for, the technical management of the structural integrity assurance and regulatory compliance of offshore and onshore assets. The primary aspect of the role is to support and manage integrity assurance and engineering assessments about asset structural integrity, regulatory compliance, performance, people and costs on behalf of our client. This role supports the specific goal of ensuring structural assets remain fit for purpose until the projected end of field life. You will need an in-depth understanding of offshore structural engineering, recognition of defects and anomalies and the ability to engineer remedial actions as necessary. Consequently, a solid understanding of structural engineering principles ie Stability, Load Paths etc is essential coupled with working knowledge of corrosion mechanisms. Key Responsibilities Include: Managing and running our client's Structural Integrity Management Strategy (SIMS) which will include: Carrying out Peer reviews and assessments on structural inspections for topside and subsea-updating and checking Written Schemes of Examination and Inspection Frequencies using a Risk-Based Approach. Maintaining Safety Critical Elements in accordance with Performance Standards Have a knowledge of Corrosion, Associated Damage Mechanisms and Inspection techniques to detect and investigate. Generate, specify and overview Repair Orders and Fabric Maintenance Recommendations in terms of scope and suitable timeframes. This will include the generation of supporting Structural Calculations for the required repair. Be responsible for the management of: Weight database for all offshore installations Assessments for lifting and temporary loads. Air Gap and Tilt Surveys in accordance with the Structural Inspection Strategy Offshore assets and onshore Terminals in assessing day-to-day safety issues. Safety Case Maintenance Be accountable for the development of information to support the Annual Summary Report ASR for all Assets. Overview and manage the development, construction and management of structural models and analyses in accordance with latest APIs, ISOs or any other appropriate codes of practice, in the performance of relevant life extension assessments where required, and as directed. Act as a focal point for Discipline Engineers and in direct support of line management. Knowledge of Regulatory Bodies and Requirements is required to fulfil required liaisons with HSEx for technical discussion, audits and any consents and licences for new and existing facilities. Be capable of taking full responsibility for the Structural Team when delegated and in the Technical Authorities' absence. Benefits: Life Assurance Private Medical Insurance Flexible Benefit Allowance Defined Contribution Pension Discretionary Bonus Flex Days 25 days holiday + bank holidays Profit Share Units Scheme For further details regarding this exciting opportunity please forward a copy of your CV today! Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications, we receive Im afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. If we can take your application further, we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd JBRP1_UKTJ
Your new company A well established mechanical and electrical building services contractor is seeking a mechanical contract manager to join their team. The well established company is family owned with a fantastic reputation, giving them repeated work from varying clients including; educational, recreational and public sector. Your new role You will be working as a Senior Mechanical Estimator for a MEP Building Services company in Lincolnshire. This is opportunity for an experienced Senior Mechanical Estimator. This client works with a variety of sectors which include; commercial, leisure, education and the public sector. Your role will require you to create estimates/tenders from mechanical services design drawings (heating, ventilation and air conditioning). Ideally you will be able to work on both design and build and pre designed projects. You will work closely with suppliers/wholesalers to obtain the best prices possible. You will have the opportunity to work on a wide range of prestigious and high value projects. What you'll need to succeed You will be a well experienced in working as a Mechanical Estimator in a building services contractor A track record of winning/securing a variety of projects Experience on design & build / pre-designed projects Used estimating software The ability to plan workload for themselves with others to ensure delivery to client deadlines What you'll get in return £40,000 - £60,000 , pension and 24 days annual leave What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk JBRP1_UKTJ
May 01, 2024
Full time
Your new company A well established mechanical and electrical building services contractor is seeking a mechanical contract manager to join their team. The well established company is family owned with a fantastic reputation, giving them repeated work from varying clients including; educational, recreational and public sector. Your new role You will be working as a Senior Mechanical Estimator for a MEP Building Services company in Lincolnshire. This is opportunity for an experienced Senior Mechanical Estimator. This client works with a variety of sectors which include; commercial, leisure, education and the public sector. Your role will require you to create estimates/tenders from mechanical services design drawings (heating, ventilation and air conditioning). Ideally you will be able to work on both design and build and pre designed projects. You will work closely with suppliers/wholesalers to obtain the best prices possible. You will have the opportunity to work on a wide range of prestigious and high value projects. What you'll need to succeed You will be a well experienced in working as a Mechanical Estimator in a building services contractor A track record of winning/securing a variety of projects Experience on design & build / pre-designed projects Used estimating software The ability to plan workload for themselves with others to ensure delivery to client deadlines What you'll get in return £40,000 - £60,000 , pension and 24 days annual leave What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk JBRP1_UKTJ
Key role to ensure client deliverables are provided on time, to budget and to client expectations the survey department. You will be accountable for ensuring jobs are delivery on time, within budget and to the required standard . Reporting directly to the Survey Manager. You will be responsible for: Provide daily support to the Surveyors. Provide effective utilisation of labour and equipment, including servicing and calibration. Communicate with the onshore Engineering team to ensure scope is fully understood. Execute the assigned task efficiently and safely, in accordance with department procedures. Establish good working relationships and communication with both client and other service companies. Provide ad-hoc reports to clients and senior management. Undertake any other general duties that may be requested. Leadership Activities Drive a culture of WeChallenge. Ensure a robust onboarding process is deployed for all personnel - with specific focus on new starts. Active participation to ensure team have current and active objectives and development plans in place. Supporting 'Exchange Zones' roll-out and deployment across business area. Execute the assigned task efficiently and safely, in accordance with department procedures. Establish good working relationships and communication with both client and other service companies. Provide ad-hoc reports to clients and senior management Survey Supervisor (day to day focus of team) Check and deliver key site information obtained by the surveyors to support the preparation of engineering documents to support the delivery of client. The above shall be achieved by application of competent technical knowledge and experienced gained via qualification and experience and will involve preparation of the following, but not limited to: - Site Sketches Dimension Control Scan Data Validation of proposed modifications Scan Databases Existing Isometrics Provide effective utilisation of labour and equipment, including servicing and calibration. Assist engineering where necessary understanding scopes, queries related directly to deliverables. Provide effective support for the Line Manager as and when required. What skills & experience you'll bring to us HNC/HND in Mechanical Engineering and/or complimentary/eqv qualification(s) Experience of Dimensional Control techniques, software, and equipment. Experience in Offshore Design Site Survey (Piping/Structural) Basic constructability knowledge and awareness Strong communicator, written and verbal. Working and demonstrable knowledge and understanding of industry standards, procedures, and processes Must be able to multi-task and work to agreed schedules.
May 01, 2024
Full time
Key role to ensure client deliverables are provided on time, to budget and to client expectations the survey department. You will be accountable for ensuring jobs are delivery on time, within budget and to the required standard . Reporting directly to the Survey Manager. You will be responsible for: Provide daily support to the Surveyors. Provide effective utilisation of labour and equipment, including servicing and calibration. Communicate with the onshore Engineering team to ensure scope is fully understood. Execute the assigned task efficiently and safely, in accordance with department procedures. Establish good working relationships and communication with both client and other service companies. Provide ad-hoc reports to clients and senior management. Undertake any other general duties that may be requested. Leadership Activities Drive a culture of WeChallenge. Ensure a robust onboarding process is deployed for all personnel - with specific focus on new starts. Active participation to ensure team have current and active objectives and development plans in place. Supporting 'Exchange Zones' roll-out and deployment across business area. Execute the assigned task efficiently and safely, in accordance with department procedures. Establish good working relationships and communication with both client and other service companies. Provide ad-hoc reports to clients and senior management Survey Supervisor (day to day focus of team) Check and deliver key site information obtained by the surveyors to support the preparation of engineering documents to support the delivery of client. The above shall be achieved by application of competent technical knowledge and experienced gained via qualification and experience and will involve preparation of the following, but not limited to: - Site Sketches Dimension Control Scan Data Validation of proposed modifications Scan Databases Existing Isometrics Provide effective utilisation of labour and equipment, including servicing and calibration. Assist engineering where necessary understanding scopes, queries related directly to deliverables. Provide effective support for the Line Manager as and when required. What skills & experience you'll bring to us HNC/HND in Mechanical Engineering and/or complimentary/eqv qualification(s) Experience of Dimensional Control techniques, software, and equipment. Experience in Offshore Design Site Survey (Piping/Structural) Basic constructability knowledge and awareness Strong communicator, written and verbal. Working and demonstrable knowledge and understanding of industry standards, procedures, and processes Must be able to multi-task and work to agreed schedules.
Elevations Technical Division are working with a global engineering solutions provider based in East Yorkshire on a specialist Senior Project Engineering vacancy to further strengthen their growing technical division. The Projects department is a small department responsible for delivering the companies Capital projects schemes. These can vary from multi-million pound plants to a small £10K works. The engineering is varied from heavy industrial work to smaller automated equipment supporting a heavy processing operation site wide. You will act as the Project lead from conception to handover in relation to planned projects or urgent/emergency works. Being able to come up with robust, technically correct and H&S conforming concepts and/or solutions. Senior Project Engineers main Responsibilities and Accountabilities: Management of the delivery of any assigned project activities to time, cost, and quality throughout the project lifecycle. Carry out of feasibility studies and the compilation of budget estimates for possible new plant. Assess the requirements for project work prior to tendering in relation to Health and Safety requirements, quality and resources for the works package. Ensure any Preconstruction information is accurate and approved by the Principal Designer prior to sending tendering packs. Maintain project records, ensure all relevant information is collated into an O&M manual for the works. Update PIDs when new plant and controls are installed. Ensure all records are in accordance with ISO 9001 Liaise with designers, fabricators, erectors, suppliers, wholesalers and distributors to obtain plant / equipment quotations which meet statutory requirements and objectives. Deputise for the Project Manager in times of absence. Mentor Junior Project Engineers when working with them and aid in their development. Check specifications proposed by suppliers to ensure they are working within the contract in relation to health, safety and environmental legislation; design and project specification. Ensure that good housekeeping practices are always adhered to within the project works. Become technical experts for the site or Appointed persons for disciplines which suit the post holders experience and qualifications. Senior Project Engineer (Qualifications and Experience): HNC in either Electrical, Mechanical or Project Engineering Time served apprenticeship in either Electrical or Mechanical Engineering Excellent understanding of current statutory regulations & guidance (LOLER, PUWER, Working At Height, Confined Spaces, EAWR etc) Leading capital projects and large Maintenance refurbishments of Heavy industrial plant. Management experience dealing with the control and management of Contractors in a contractual environment including contract labour. Ability to understand and control budgets Proficient in Autocad dwg skills and able to produce P&IDs and schematics. Computer literate, with a good working knowledge of MS office packages If this role is of interest or you would like a confidential chat, please contact Katy Emmott, Jack Heffren or apply today. JBRP1_UKTJ
May 01, 2024
Full time
Elevations Technical Division are working with a global engineering solutions provider based in East Yorkshire on a specialist Senior Project Engineering vacancy to further strengthen their growing technical division. The Projects department is a small department responsible for delivering the companies Capital projects schemes. These can vary from multi-million pound plants to a small £10K works. The engineering is varied from heavy industrial work to smaller automated equipment supporting a heavy processing operation site wide. You will act as the Project lead from conception to handover in relation to planned projects or urgent/emergency works. Being able to come up with robust, technically correct and H&S conforming concepts and/or solutions. Senior Project Engineers main Responsibilities and Accountabilities: Management of the delivery of any assigned project activities to time, cost, and quality throughout the project lifecycle. Carry out of feasibility studies and the compilation of budget estimates for possible new plant. Assess the requirements for project work prior to tendering in relation to Health and Safety requirements, quality and resources for the works package. Ensure any Preconstruction information is accurate and approved by the Principal Designer prior to sending tendering packs. Maintain project records, ensure all relevant information is collated into an O&M manual for the works. Update PIDs when new plant and controls are installed. Ensure all records are in accordance with ISO 9001 Liaise with designers, fabricators, erectors, suppliers, wholesalers and distributors to obtain plant / equipment quotations which meet statutory requirements and objectives. Deputise for the Project Manager in times of absence. Mentor Junior Project Engineers when working with them and aid in their development. Check specifications proposed by suppliers to ensure they are working within the contract in relation to health, safety and environmental legislation; design and project specification. Ensure that good housekeeping practices are always adhered to within the project works. Become technical experts for the site or Appointed persons for disciplines which suit the post holders experience and qualifications. Senior Project Engineer (Qualifications and Experience): HNC in either Electrical, Mechanical or Project Engineering Time served apprenticeship in either Electrical or Mechanical Engineering Excellent understanding of current statutory regulations & guidance (LOLER, PUWER, Working At Height, Confined Spaces, EAWR etc) Leading capital projects and large Maintenance refurbishments of Heavy industrial plant. Management experience dealing with the control and management of Contractors in a contractual environment including contract labour. Ability to understand and control budgets Proficient in Autocad dwg skills and able to produce P&IDs and schematics. Computer literate, with a good working knowledge of MS office packages If this role is of interest or you would like a confidential chat, please contact Katy Emmott, Jack Heffren or apply today. JBRP1_UKTJ
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities Weatherford have a very exciting opportunity for an experienced Project Engineer (Senior Design Engineer) to join the team in Altens, Aberdeen. The Project Engineer is responsible for design of new products and makes improvements to existing products. Performs complex tasks and fulfils broad responsibilities where required outcomes are defined, but methods and procedures may vary based on precedent or professional judgment. Considerable latitude for unreviewed action. Confers with supervisor on unusual matters. Coordinates the work of others on projects and may assign work to and assist less experienced professionals or support staff. DUTIES & RESPONSIBILITIES: OPERATIONAL Provides technical authority and support of our global technical sales and operations teams business pursuit and associated support functions, inclusive of customer facing activities. Prepares detailed design proposals, schedules and cost estimates for assigned projects. Ensures technical input specifications are documented clearly and any changes are managed formally. Executes engineering projects; on time, on budget with respect to input specification and planning. Designs for manufacture via collaboration with manufacturing, ensuring product cost targets are met. Prepares new and existing product design packages in alignment with process, ensuring standards and requirements are met, maintained and sustained. Leads and attends cross functional and customer design reviews for new and existing products. Produces, develops, maintains, sustains standardized engineering data and documentation. Proactively engages and constructively contributes to the activities, deliverables and development of others. Checks and approves product design packages and associated engineering data and documentation of others. Proactively supports the standardization of best practices and solutions. Leads, plans and prepares product test protocols and procedures. Produces, develops, maintains and sustains high quality technical documentation to support other functions engagement and quality of services on associated products. Prepares detailed technical reports as necessary to support internal and external customer communications and understanding of events. Prepares, maintains and sustains product technical and commercial test summary data, ensuring; customer, regulatory and Weatherford planned protocols are complete and transparent. Dispositions NCR's, supports CPAR's and associated root cause analysis. Provides manual assistance in the process of assembly & testing of new and existing products. Identifies any opportunities for improvement (OFI) regarding design, planning and associated processes. Proactively trains, develops and supports global roofline teams via the delivery of effective training and competency content associated with new products. Ensures product data, documentation and associated toolboxes are clean, standardized and ready to support efficient supply chain and field operations. Supports the development of operationally running procedures, FMECA's, HAZOPS in support of associated products service delivery excellence. Proactively supports technology transfer and associated management of change (MoC) projects. SAFETY & COMPLIANCE Adhere to all Weatherford QHSSE policies and procedures. Adhere to all Customer QHSSE policies and procedures. Contribute to safety meetings & culture. Report task specific and area risk assessments. Develop and maintain procedures and work instructions ensuring full compliance to HSE and quality expectations. Train and develop in accordance with defined training structure and competency system. FINANCE Responsible for the project cost planning and control and project level. Responsible for product cost outcomes. Responsible for the planning and assessment of cost implications of design changes or new designs, informing projected costs to line management On time, on budget delivery for all assigned projects. Responsible for reporting of monthly planned v actual progress of assigned projects. Qualifications 5-10 years related relevant industry experience - should have experience in designing and testing downhole tools. Must have Engineering Degree and demonstrated practical knowledge and work experience. Experience in product realization and commercialization processes at a Project Engineer level. Working knowledge of 3D CAD and associated engineering systems. Proficient user of Microsoft Office applications. Working knowledge of mechanical engineering practices, standards, specifications and regulations particularly related to the oil and gas industry. Experience with completion services and products. A bias for process discipline and an established track record of executing to plan and achieving results. Experience in technology transfer and the development of others. Excellent communication, interpersonal and organisational skills. Able and willing to push through constraints in an engaging and collaborative manner. Must possess effective technical leadership and assertiveness skills as well as proficient communication skills, both verbal and written. Committed to providing a quality product and service to internal and external customers. Self-motivated and can do attitude. Methodical and naturally inquisitive mindset. Committed person with a flexible attitude to work patterns. Good team player that has worked in a multi-functional environment. Ability to function effectively under pressure throughout busy periods. Availability to travel as necessary is essential.
May 01, 2024
Full time
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities Weatherford have a very exciting opportunity for an experienced Project Engineer (Senior Design Engineer) to join the team in Altens, Aberdeen. The Project Engineer is responsible for design of new products and makes improvements to existing products. Performs complex tasks and fulfils broad responsibilities where required outcomes are defined, but methods and procedures may vary based on precedent or professional judgment. Considerable latitude for unreviewed action. Confers with supervisor on unusual matters. Coordinates the work of others on projects and may assign work to and assist less experienced professionals or support staff. DUTIES & RESPONSIBILITIES: OPERATIONAL Provides technical authority and support of our global technical sales and operations teams business pursuit and associated support functions, inclusive of customer facing activities. Prepares detailed design proposals, schedules and cost estimates for assigned projects. Ensures technical input specifications are documented clearly and any changes are managed formally. Executes engineering projects; on time, on budget with respect to input specification and planning. Designs for manufacture via collaboration with manufacturing, ensuring product cost targets are met. Prepares new and existing product design packages in alignment with process, ensuring standards and requirements are met, maintained and sustained. Leads and attends cross functional and customer design reviews for new and existing products. Produces, develops, maintains, sustains standardized engineering data and documentation. Proactively engages and constructively contributes to the activities, deliverables and development of others. Checks and approves product design packages and associated engineering data and documentation of others. Proactively supports the standardization of best practices and solutions. Leads, plans and prepares product test protocols and procedures. Produces, develops, maintains and sustains high quality technical documentation to support other functions engagement and quality of services on associated products. Prepares detailed technical reports as necessary to support internal and external customer communications and understanding of events. Prepares, maintains and sustains product technical and commercial test summary data, ensuring; customer, regulatory and Weatherford planned protocols are complete and transparent. Dispositions NCR's, supports CPAR's and associated root cause analysis. Provides manual assistance in the process of assembly & testing of new and existing products. Identifies any opportunities for improvement (OFI) regarding design, planning and associated processes. Proactively trains, develops and supports global roofline teams via the delivery of effective training and competency content associated with new products. Ensures product data, documentation and associated toolboxes are clean, standardized and ready to support efficient supply chain and field operations. Supports the development of operationally running procedures, FMECA's, HAZOPS in support of associated products service delivery excellence. Proactively supports technology transfer and associated management of change (MoC) projects. SAFETY & COMPLIANCE Adhere to all Weatherford QHSSE policies and procedures. Adhere to all Customer QHSSE policies and procedures. Contribute to safety meetings & culture. Report task specific and area risk assessments. Develop and maintain procedures and work instructions ensuring full compliance to HSE and quality expectations. Train and develop in accordance with defined training structure and competency system. FINANCE Responsible for the project cost planning and control and project level. Responsible for product cost outcomes. Responsible for the planning and assessment of cost implications of design changes or new designs, informing projected costs to line management On time, on budget delivery for all assigned projects. Responsible for reporting of monthly planned v actual progress of assigned projects. Qualifications 5-10 years related relevant industry experience - should have experience in designing and testing downhole tools. Must have Engineering Degree and demonstrated practical knowledge and work experience. Experience in product realization and commercialization processes at a Project Engineer level. Working knowledge of 3D CAD and associated engineering systems. Proficient user of Microsoft Office applications. Working knowledge of mechanical engineering practices, standards, specifications and regulations particularly related to the oil and gas industry. Experience with completion services and products. A bias for process discipline and an established track record of executing to plan and achieving results. Experience in technology transfer and the development of others. Excellent communication, interpersonal and organisational skills. Able and willing to push through constraints in an engaging and collaborative manner. Must possess effective technical leadership and assertiveness skills as well as proficient communication skills, both verbal and written. Committed to providing a quality product and service to internal and external customers. Self-motivated and can do attitude. Methodical and naturally inquisitive mindset. Committed person with a flexible attitude to work patterns. Good team player that has worked in a multi-functional environment. Ability to function effectively under pressure throughout busy periods. Availability to travel as necessary is essential.
Renishaw is seeking a Senior Mechanical Design Development Engineer to join the Current Product design team in Renishaws Additive Manufacturing Group (AMG). The role will include all aspects of the design process, from initial concept through to finished product. Additive Manufacturing (3D printing) is an emerging technology that builds parts in layers using a high powdered laser to fuse fine metallic powder to form the finished object and is set to transform the way components and assemblies are made in fields as diverse as orthopaedic implants and component manufacture in aerospace. Renishaws involvement in this exciting technology presents an excellent opportunity to be part of this manufacturing revolution. Responsibilities 3D design and 2D drawing creation to BS8888 Development of prototype system components in line with product development requirements Develop prototype testing and analysis of data to support the design Working with quality and engineering teams to investigate product performance issues, providing solutions to a timescale Working closely with manufacturing engineers to ensure best practice for manufacture and assembly Prepare reports and specifications Complete requirements for the change management process to allow swift introductions Key requirements Educated to at least degree level in Mechanical Engineering or similar related engineering degree (2:1 or above) The ability to demonstrate achievements in the design of machined components and assemblies The ability to communicate design solutions to levels suitable for knowledge transfer A full and valid UK driving licence and the willingness and ability to travel to other AM division sites across the country for project work Desirable requirements Expertise in the use of 3D CAD, preferably Siemens NX Familiarity with core analytical analysis techniques, such as degree level applied maths, six sigma etc. An aptitude for design suitable for assembly and test An appreciation of control systems requirements An appreciation for the application of compliance standards to industrial machinery An aptitude for problem solving Programming experience in MATLAB or LabVIEW would be beneficial Excellent IT skills, including Microsoft Word and Excel, with the ability to adapt to new software quickly Opportunities for career development and training CAD training Machine tool training Product training Renishaw professional development courses Person specification As a Senior Mechanical Design/Development Engineer youll demonstrate a practical approach to design, be excited by having to solve complex engineering problems with attention to detail.Youll thrive working as part of a multi-disciplined team where output is subject to team scrutiny and communicating effectively will be key. Hybrid working Youll be based at our Miskin manufacturing site where youll have options for hybrid working, predominately working 3 days in the office and 2 days from home per week. We also have a variable working pattern in place, where you can work a 4.5-day week and have a half day on a Friday. Benefits When you join Renishaw, we're committing to your future career. That's because we believe in developing our people's skills and promoting them internally. We also offer a benefits package that's highly desirable; including a 9% non-contributory pension, discretionary annual bonus, subsidised onsite restaurants and coffee shops, free parking, car sharing scheme and 24 hour fitness centres. We also want to promote a healthy work-life balance as much as possible, so we have introduced a hybrid working policy which allows for a combination of home and office based working depending on the nature of your role. We also offer a variable working programme, 25 days holiday plus bank holidays, Life Assurance policy of 12 annual salary, Cycle to Work scheme, enhanced maternity pay subject to qualifying criteria, the option to join BUPA Renishaw health trust and an Employee Assistance Programme for employees and family. At Renishaw we believe that our success is powered by welcoming a workforce of diverse and talented people. Through encouraging an inclusive culture, where all our employees are free to be themselves, we can achieve our core values: Innovation, Inspiration, Integrity, and Involvement. If you are excited about the role but feel as though you dont meet all the requirements, we would encourage you still to apply. You might just be the right person for this role or another opportunity at Renishaw. We are committed to providing reasonable adjustments to make interviews and jobs more accessible. Should you have any difficulty during the recruitment process, or require any reasonable adjustments please contact the recruitment team. JBRP1_UKTJ
May 01, 2024
Full time
Renishaw is seeking a Senior Mechanical Design Development Engineer to join the Current Product design team in Renishaws Additive Manufacturing Group (AMG). The role will include all aspects of the design process, from initial concept through to finished product. Additive Manufacturing (3D printing) is an emerging technology that builds parts in layers using a high powdered laser to fuse fine metallic powder to form the finished object and is set to transform the way components and assemblies are made in fields as diverse as orthopaedic implants and component manufacture in aerospace. Renishaws involvement in this exciting technology presents an excellent opportunity to be part of this manufacturing revolution. Responsibilities 3D design and 2D drawing creation to BS8888 Development of prototype system components in line with product development requirements Develop prototype testing and analysis of data to support the design Working with quality and engineering teams to investigate product performance issues, providing solutions to a timescale Working closely with manufacturing engineers to ensure best practice for manufacture and assembly Prepare reports and specifications Complete requirements for the change management process to allow swift introductions Key requirements Educated to at least degree level in Mechanical Engineering or similar related engineering degree (2:1 or above) The ability to demonstrate achievements in the design of machined components and assemblies The ability to communicate design solutions to levels suitable for knowledge transfer A full and valid UK driving licence and the willingness and ability to travel to other AM division sites across the country for project work Desirable requirements Expertise in the use of 3D CAD, preferably Siemens NX Familiarity with core analytical analysis techniques, such as degree level applied maths, six sigma etc. An aptitude for design suitable for assembly and test An appreciation of control systems requirements An appreciation for the application of compliance standards to industrial machinery An aptitude for problem solving Programming experience in MATLAB or LabVIEW would be beneficial Excellent IT skills, including Microsoft Word and Excel, with the ability to adapt to new software quickly Opportunities for career development and training CAD training Machine tool training Product training Renishaw professional development courses Person specification As a Senior Mechanical Design/Development Engineer youll demonstrate a practical approach to design, be excited by having to solve complex engineering problems with attention to detail.Youll thrive working as part of a multi-disciplined team where output is subject to team scrutiny and communicating effectively will be key. Hybrid working Youll be based at our Miskin manufacturing site where youll have options for hybrid working, predominately working 3 days in the office and 2 days from home per week. We also have a variable working pattern in place, where you can work a 4.5-day week and have a half day on a Friday. Benefits When you join Renishaw, we're committing to your future career. That's because we believe in developing our people's skills and promoting them internally. We also offer a benefits package that's highly desirable; including a 9% non-contributory pension, discretionary annual bonus, subsidised onsite restaurants and coffee shops, free parking, car sharing scheme and 24 hour fitness centres. We also want to promote a healthy work-life balance as much as possible, so we have introduced a hybrid working policy which allows for a combination of home and office based working depending on the nature of your role. We also offer a variable working programme, 25 days holiday plus bank holidays, Life Assurance policy of 12 annual salary, Cycle to Work scheme, enhanced maternity pay subject to qualifying criteria, the option to join BUPA Renishaw health trust and an Employee Assistance Programme for employees and family. At Renishaw we believe that our success is powered by welcoming a workforce of diverse and talented people. Through encouraging an inclusive culture, where all our employees are free to be themselves, we can achieve our core values: Innovation, Inspiration, Integrity, and Involvement. If you are excited about the role but feel as though you dont meet all the requirements, we would encourage you still to apply. You might just be the right person for this role or another opportunity at Renishaw. We are committed to providing reasonable adjustments to make interviews and jobs more accessible. Should you have any difficulty during the recruitment process, or require any reasonable adjustments please contact the recruitment team. JBRP1_UKTJ
Project Engineer Worksop - commutable from Retford, Sheffield, Lincoln, Chesterfield, Mansfield £35,000 - £45,000 + Company Car (Personal & Business Use) + Company Credit Card + Phone & Laptop + Office Based + Days Based 8:00 - 17:00, Early Finish On Fridays + Travel and Stay Away Are you a Project Engineer looking to take the next step in your career and join leading company in their industry where you will be tasked with Overseeing specialist projects from conception to completion? Do you want to become a part of a company with a large customer base in the UK and worldwide, offering training from senior engineers to assist with your progression while providing you the chance to work on a range of exiting projects with their blue-chip clientele. This company are going from strength to strength and with over 40 years of experience in their industry they have amassed a large customer base allowing them to be a stable employer with great staff retention. They pride themselves on offering a brilliant service to all their clients and are willing to invest in new ways for their staff to develop. In this role you will be shadowing a senior engineer to improve your knowledge of the industry, skillset, and ability to work on your own, while also playing a key role in all stages of multiple projects overseeing the design, installation and commissioning of process and production equipment within a variety of industries. This role will involve consistent travel and stay away to customer sites across the UK and Ireland, the length of your time away will vary from project to project depending on the needs. The ideal candidate for this role will be a Project Engineer who has knowledge of Capital Equipment and design experience on AutoCAD. The role: Project Engineer Working directly with clients Overseeing projects from conception to completion Office based with travel to customers sites and stay away Supervise internal and external staff and assisting other divisions of the company as required The person: Project Engineer Engineering Degree or Mechanical Engineering Qualifications Full Drivers Licence Reference Number: BBBH223611 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Pelumi Salau at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
May 01, 2024
Full time
Project Engineer Worksop - commutable from Retford, Sheffield, Lincoln, Chesterfield, Mansfield £35,000 - £45,000 + Company Car (Personal & Business Use) + Company Credit Card + Phone & Laptop + Office Based + Days Based 8:00 - 17:00, Early Finish On Fridays + Travel and Stay Away Are you a Project Engineer looking to take the next step in your career and join leading company in their industry where you will be tasked with Overseeing specialist projects from conception to completion? Do you want to become a part of a company with a large customer base in the UK and worldwide, offering training from senior engineers to assist with your progression while providing you the chance to work on a range of exiting projects with their blue-chip clientele. This company are going from strength to strength and with over 40 years of experience in their industry they have amassed a large customer base allowing them to be a stable employer with great staff retention. They pride themselves on offering a brilliant service to all their clients and are willing to invest in new ways for their staff to develop. In this role you will be shadowing a senior engineer to improve your knowledge of the industry, skillset, and ability to work on your own, while also playing a key role in all stages of multiple projects overseeing the design, installation and commissioning of process and production equipment within a variety of industries. This role will involve consistent travel and stay away to customer sites across the UK and Ireland, the length of your time away will vary from project to project depending on the needs. The ideal candidate for this role will be a Project Engineer who has knowledge of Capital Equipment and design experience on AutoCAD. The role: Project Engineer Working directly with clients Overseeing projects from conception to completion Office based with travel to customers sites and stay away Supervise internal and external staff and assisting other divisions of the company as required The person: Project Engineer Engineering Degree or Mechanical Engineering Qualifications Full Drivers Licence Reference Number: BBBH223611 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Pelumi Salau at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
Job Title: Mechanical Engineering Internship - Starting Summer 2024 (12 months) About SLB: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act - how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialized Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Job Summary: Development of a new product is a complex process involving review of variable concepts. At any stage of the design the actual testing of the concept is very beneficial to access the capability of the design. This internship involves testing of the concepts and review of the results in contexts of the large project. You will be working alongside Senior Mechanical and Electrical Engineers learning the variety of the subjects, for example: concept identification, design assessment, testing set-up, data processing etc. Your responsibilities will be clearly defined however not limited to the scope of the internship (you can choose to be involved in other parts of the project or in general activities of the centre). Deliverables: Learning and using a wide variety of engineering skills to deliver a design of a system which is capable of withstanding the harsh downhole environment. Developed skills include: CAD Software FEA Structural Analysis Technical Drawings 3D Printing Required Skills: Good oral & written skills Motivated & a team player Qualification: You must be studying towards a Master's degree (Penultimate or Final year) in Mechanical Eningeering or a related discipline. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
May 01, 2024
Full time
Job Title: Mechanical Engineering Internship - Starting Summer 2024 (12 months) About SLB: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act - how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialized Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Job Summary: Development of a new product is a complex process involving review of variable concepts. At any stage of the design the actual testing of the concept is very beneficial to access the capability of the design. This internship involves testing of the concepts and review of the results in contexts of the large project. You will be working alongside Senior Mechanical and Electrical Engineers learning the variety of the subjects, for example: concept identification, design assessment, testing set-up, data processing etc. Your responsibilities will be clearly defined however not limited to the scope of the internship (you can choose to be involved in other parts of the project or in general activities of the centre). Deliverables: Learning and using a wide variety of engineering skills to deliver a design of a system which is capable of withstanding the harsh downhole environment. Developed skills include: CAD Software FEA Structural Analysis Technical Drawings 3D Printing Required Skills: Good oral & written skills Motivated & a team player Qualification: You must be studying towards a Master's degree (Penultimate or Final year) in Mechanical Eningeering or a related discipline. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Senior Electrical Design Engineer / Electrical Design Engineer - (Building Services / MEP) Exeter Hybrid Working £45k - £55k Dependent on experience MEP Electrical Design Engineer / Building Services / Electrical Design Engineer / Senior Electrical Design Engineer / Electrical Engineer This electrical or senior electrical design engineer role is to join a specialist building services design team within a large multidisciplinary building consultancy. Its to join a down to earth supportive friendly team of design engineers, designing a range of sustainably focused mechanical and electrical works for sectors such as education and local authority. Responsibilities include taking the project lead or working as part of a larger design team. This employer is proud to offer a good work life balance with a 37 hour working week and are highly supportive of professional development. Responsibilities The preparation of outline design schemes Visiting site during the construction phase to monitor progress. Detailed calculations Promote the use of renewable technologies. Using specialist computer-aided design (CAD) and BIM (Revit) software and other resources to design the systems required for each project. Liaising closely with other professionals, including structural engineers, architects, surveyors, and contractors of in-house and external project teams Supporting junior team members Qualifications/Attributes MEng / BEng / HND /HNC in Electrical Engineering or Building Services A minimum of 3 years electrical design experience in building services. Experience of Revit would be advantageous but not essential. High quality oral and written communications (reports, instructions etc) Driving licence and car JBRP1_UKTJ
May 01, 2024
Full time
Senior Electrical Design Engineer / Electrical Design Engineer - (Building Services / MEP) Exeter Hybrid Working £45k - £55k Dependent on experience MEP Electrical Design Engineer / Building Services / Electrical Design Engineer / Senior Electrical Design Engineer / Electrical Engineer This electrical or senior electrical design engineer role is to join a specialist building services design team within a large multidisciplinary building consultancy. Its to join a down to earth supportive friendly team of design engineers, designing a range of sustainably focused mechanical and electrical works for sectors such as education and local authority. Responsibilities include taking the project lead or working as part of a larger design team. This employer is proud to offer a good work life balance with a 37 hour working week and are highly supportive of professional development. Responsibilities The preparation of outline design schemes Visiting site during the construction phase to monitor progress. Detailed calculations Promote the use of renewable technologies. Using specialist computer-aided design (CAD) and BIM (Revit) software and other resources to design the systems required for each project. Liaising closely with other professionals, including structural engineers, architects, surveyors, and contractors of in-house and external project teams Supporting junior team members Qualifications/Attributes MEng / BEng / HND /HNC in Electrical Engineering or Building Services A minimum of 3 years electrical design experience in building services. Experience of Revit would be advantageous but not essential. High quality oral and written communications (reports, instructions etc) Driving licence and car JBRP1_UKTJ
Senior Design Engineer Perm, up to £55k pa DOE, 40hrs per week, Mon to Fri BRADFORD Due to significant growth, Interaction Recruitment are looking for an experienced Design Engineer, with a solid Mechanical background, to work for one of their clients, a busy Manufacturing/Engineering company based in Bradford. Your role is to provide input into concepts that encompass the customers manufacturing requirements and you will be responsible for the mechanical design realisation of the projects under your control. Day to day tasks will include: -Design automated assembly machines, semi-automated work cells and manual tooling aids for factory production equipment -Analysing customer requirements and creating specifications to develop the scope, design and drawing package for manufacturing equipment -Liaising with both customers and suppliers alike -Support, debug, troubleshooting, and integration activities -Analyse, specify and select commercial components -Evaluate strength and cycle time requirements -Review drawings and prepare drawing documentation -Communicate with team members from various departments -Adhere to all health and safety rules and procedures To be successful, you must have a Degree in Mechanical Engineering or equivalent, HNC or be Apprentice Trained with proven experience within the industry. Other keys skills required: -Experience in the design of machines and solutions for automated production processes from concept to delivery -Experience using Solidworks would be beneficial -Production of engineering drawings, 3D-CAD models and technical files -Disciplined approach to project planning and project management -Ability to present designs to customers -Knowledge of current British Standards -Preparing BOM's -Creative mind with good problem-solving skills You will be required to work 40hrs per week, 8am to 5.15pm from Mon to Thurs with an early finish on a Fri. The Salary for the role is up to £55k pa Depending on Experience and the role is advertised as Permanent. If you are interested in this role, please either apply within, send your CV to or call and ask to speak to Tom. JBRP1_UKTJ
May 01, 2024
Full time
Senior Design Engineer Perm, up to £55k pa DOE, 40hrs per week, Mon to Fri BRADFORD Due to significant growth, Interaction Recruitment are looking for an experienced Design Engineer, with a solid Mechanical background, to work for one of their clients, a busy Manufacturing/Engineering company based in Bradford. Your role is to provide input into concepts that encompass the customers manufacturing requirements and you will be responsible for the mechanical design realisation of the projects under your control. Day to day tasks will include: -Design automated assembly machines, semi-automated work cells and manual tooling aids for factory production equipment -Analysing customer requirements and creating specifications to develop the scope, design and drawing package for manufacturing equipment -Liaising with both customers and suppliers alike -Support, debug, troubleshooting, and integration activities -Analyse, specify and select commercial components -Evaluate strength and cycle time requirements -Review drawings and prepare drawing documentation -Communicate with team members from various departments -Adhere to all health and safety rules and procedures To be successful, you must have a Degree in Mechanical Engineering or equivalent, HNC or be Apprentice Trained with proven experience within the industry. Other keys skills required: -Experience in the design of machines and solutions for automated production processes from concept to delivery -Experience using Solidworks would be beneficial -Production of engineering drawings, 3D-CAD models and technical files -Disciplined approach to project planning and project management -Ability to present designs to customers -Knowledge of current British Standards -Preparing BOM's -Creative mind with good problem-solving skills You will be required to work 40hrs per week, 8am to 5.15pm from Mon to Thurs with an early finish on a Fri. The Salary for the role is up to £55k pa Depending on Experience and the role is advertised as Permanent. If you are interested in this role, please either apply within, send your CV to or call and ask to speak to Tom. JBRP1_UKTJ