Environmental Team Lead Our client, a leading independent Oil & Gas operator, is currently seeking an Environmental Team Lead to join their QSSHE department. This is a full-time permanent position, working Monday to Friday located in Norwich. There may be some required travel to other sites and on occasions visits offshore. The successful Environmental Team Lead will be managing a team of Environmental Advisors, you will provide competent and proactive environmental support to onshore and offshore producing assets. Additionally, you will ensure that all environmental requirements are fully understood, risks, controls and mitigations identified and put in place in a timely, economical and effective fashion, from operations through to decommissioning, including projects, drilling, infill, etc. Key Responsibilities Include: Management of all OPPC, ETS, Chemical permits for offshore. Review all permits submissions to the regulator. Technical input into Terminal Environmental Operations. Produce an Environmental plan that sets out our key initiatives and milestones for delivery in support of ISO14001. Coordinate and lead the maintenance of ISO14001:2015. Complete programmed Audits & Inspections as scheduled. Owner of the Environmental SEMS documents. Ensure the timely submission of all internal and external reporting Represent the company in external affairs concerning environmental management. Provide advice on environmental policy and legislation compliance to the team. Coordinate the monitoring and review of environmental legislative changes and the potential impact on the business. Undertake regular reviews of the performance of personnel and contractors with regard to meeting environmental operating standards through site visits, inspections and/or audits. Undertake site visits to review and support line management in their completion of investigations into the causes of events and the identification of root causes and preventative measures. Working with the training team develop and maintain training and advisory documents and deliver training and advisory sessions to personnel. Ensure OPEP s are maintained. Member of the IMT. Provide input and oversight of environmental element of HSE budget. Line Manager for the Environmental Advisors. Input into project PLANC and providing technical supervisor of the Projects Environmental Advisor. Safety & Environmentally Critical Courses: Bachelor of Science in Environmental Sciences NEBOSH National General Cert in Occupational Health and Safety Incident Investigator course Key Requirements Include: Essential: Strong experience working in the environmental field of the offshore upstream Oil & Gas sector (operator environment) performing at Advisor or Team Leader level. Demonstrable breadth of experience including offshore production, subsea, drilling and well intervention operations. A sound knowledge of the UK regulatory environmental framework and how it can be influenced. Sound knowledge of emissions management and emissions trading schemes relating to offshore Excellent communication skills both written and verbal Degree in Environmental Management, Engineering or similar Trained ISO14001 auditor Working knowledge of SCR2015 PORTAL, EEMS, ETSWAP (or UK equivalent) Knowledge of SECR Preferred: Team Leader or Supervisory Experience 10 years in the Oil and Gas Industry Full Member of IEMA or similar Trained incident investigator MSc Environmental Management or Similar Experience of onshore terminals COMAH NORM Management / RPS Ability to: Build excellent relationship to influences & collaborate with peers & stakeholders to deliver mutual success. As the Environmental Team Lead, you will plan and organise and must be able to multi-task whilst displaying flexibility and strong prioritisation skills. Our client is seeking applicants who take a pragmatic approach to work whilst acting with integrity, as well as influencing multi-disciplined internal and external stakeholders at all levels. You will be working alongside leadership, so it is crucial you are proactive and self-starting with the ability to use personal credibility and relationships to educate and assist others. Benefits: Life Assurance Private Medical Insurance Flexible Benefit Allowance Excellent Pension Provision 25 Days Holiday Discretionary Bonus Profit Units Sharing Scheme For further details, please forward a copy of your CV today Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications we receive I m afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. If we can take your application further, we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd
Apr 29, 2024
Full time
Environmental Team Lead Our client, a leading independent Oil & Gas operator, is currently seeking an Environmental Team Lead to join their QSSHE department. This is a full-time permanent position, working Monday to Friday located in Norwich. There may be some required travel to other sites and on occasions visits offshore. The successful Environmental Team Lead will be managing a team of Environmental Advisors, you will provide competent and proactive environmental support to onshore and offshore producing assets. Additionally, you will ensure that all environmental requirements are fully understood, risks, controls and mitigations identified and put in place in a timely, economical and effective fashion, from operations through to decommissioning, including projects, drilling, infill, etc. Key Responsibilities Include: Management of all OPPC, ETS, Chemical permits for offshore. Review all permits submissions to the regulator. Technical input into Terminal Environmental Operations. Produce an Environmental plan that sets out our key initiatives and milestones for delivery in support of ISO14001. Coordinate and lead the maintenance of ISO14001:2015. Complete programmed Audits & Inspections as scheduled. Owner of the Environmental SEMS documents. Ensure the timely submission of all internal and external reporting Represent the company in external affairs concerning environmental management. Provide advice on environmental policy and legislation compliance to the team. Coordinate the monitoring and review of environmental legislative changes and the potential impact on the business. Undertake regular reviews of the performance of personnel and contractors with regard to meeting environmental operating standards through site visits, inspections and/or audits. Undertake site visits to review and support line management in their completion of investigations into the causes of events and the identification of root causes and preventative measures. Working with the training team develop and maintain training and advisory documents and deliver training and advisory sessions to personnel. Ensure OPEP s are maintained. Member of the IMT. Provide input and oversight of environmental element of HSE budget. Line Manager for the Environmental Advisors. Input into project PLANC and providing technical supervisor of the Projects Environmental Advisor. Safety & Environmentally Critical Courses: Bachelor of Science in Environmental Sciences NEBOSH National General Cert in Occupational Health and Safety Incident Investigator course Key Requirements Include: Essential: Strong experience working in the environmental field of the offshore upstream Oil & Gas sector (operator environment) performing at Advisor or Team Leader level. Demonstrable breadth of experience including offshore production, subsea, drilling and well intervention operations. A sound knowledge of the UK regulatory environmental framework and how it can be influenced. Sound knowledge of emissions management and emissions trading schemes relating to offshore Excellent communication skills both written and verbal Degree in Environmental Management, Engineering or similar Trained ISO14001 auditor Working knowledge of SCR2015 PORTAL, EEMS, ETSWAP (or UK equivalent) Knowledge of SECR Preferred: Team Leader or Supervisory Experience 10 years in the Oil and Gas Industry Full Member of IEMA or similar Trained incident investigator MSc Environmental Management or Similar Experience of onshore terminals COMAH NORM Management / RPS Ability to: Build excellent relationship to influences & collaborate with peers & stakeholders to deliver mutual success. As the Environmental Team Lead, you will plan and organise and must be able to multi-task whilst displaying flexibility and strong prioritisation skills. Our client is seeking applicants who take a pragmatic approach to work whilst acting with integrity, as well as influencing multi-disciplined internal and external stakeholders at all levels. You will be working alongside leadership, so it is crucial you are proactive and self-starting with the ability to use personal credibility and relationships to educate and assist others. Benefits: Life Assurance Private Medical Insurance Flexible Benefit Allowance Excellent Pension Provision 25 Days Holiday Discretionary Bonus Profit Units Sharing Scheme For further details, please forward a copy of your CV today Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications we receive I m afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. If we can take your application further, we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. Role Overview: This is a new role within the company. With a wide ranging remit to manage technical documents in support of test and compliance activities, and perform defined tasks in line with company SOP's. This will require owning the job function and performing all tasks required, and to file off / store supporting documentation and reports within defined company storage repositories. As such it will suit someone with an understanding of engineering, imagination and drive. Key accountabilities and responsibilities: Prepare and maintain high quality technical documentation in line with company requirements Manage document lifecycle - control/release/change management using document control system PLM Review of internal & external test reports for suitability (quality and completeness etc) Performing data retrieval tasks and evaluation of results in line with company SOP's Organising and co-ordination of release of hardware from Saab Seaeye to external testing companies Management of returned test articles into the business Managing RFQ's for Testing services + other equipment and components Managing the purchase of required test services / equipment / components from vendor selection to PO request process Processing department performance metrics, and creating and managing KPI's Essential Skills: Technical level education - A level / ONC Min 3 years in a technical focussed role Proven experience in data capture and analysis Previous experience working with multi-disciplinary systems (electrical, mechanical, software) Excellent communicator: both written and verbal Innovative and creative mind set with technical awareness Ability to work unsupervised to tight timescales Enthusiasm, drive and personality! Data reviews so as to analyse and summarise data trends Competent and able to use Microsoft Office to a high level (Excel a must ) Desirable: HNC or Degree in a relevant engineering discipline Experience in the offshore and/or subsea industry Knowledge of product certification, best-practice and industry standards Knowledge of compliance standards and certification (CE/DNV) Expert / advanced user of Microsoft Excel. Experience with data archiving / controlled repositories management Previous experience in a customer-facing role General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day to day activities and procedures within the specified role. To maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role. To act ethically, with integrity and in the best interest of the business at all times. To maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. To carry out any other duties as detailed by your Supervisor or Manager from time to time. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. Quality, health, safety and environment (QHSE) Cooperate with the company to achieve a healthy, safe and sustainable working environment. Work in ways that ensure your own safety and that of others; "Do the right thing even when no one is looking." Report any incidents, near misses or other health, safety and environmental concerns. Deliver all products and services in line with Saab Seaeye quality standards to ensure we meet our customer requirements and highlight any quality concerns or potential improvements.
Apr 29, 2024
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. Role Overview: This is a new role within the company. With a wide ranging remit to manage technical documents in support of test and compliance activities, and perform defined tasks in line with company SOP's. This will require owning the job function and performing all tasks required, and to file off / store supporting documentation and reports within defined company storage repositories. As such it will suit someone with an understanding of engineering, imagination and drive. Key accountabilities and responsibilities: Prepare and maintain high quality technical documentation in line with company requirements Manage document lifecycle - control/release/change management using document control system PLM Review of internal & external test reports for suitability (quality and completeness etc) Performing data retrieval tasks and evaluation of results in line with company SOP's Organising and co-ordination of release of hardware from Saab Seaeye to external testing companies Management of returned test articles into the business Managing RFQ's for Testing services + other equipment and components Managing the purchase of required test services / equipment / components from vendor selection to PO request process Processing department performance metrics, and creating and managing KPI's Essential Skills: Technical level education - A level / ONC Min 3 years in a technical focussed role Proven experience in data capture and analysis Previous experience working with multi-disciplinary systems (electrical, mechanical, software) Excellent communicator: both written and verbal Innovative and creative mind set with technical awareness Ability to work unsupervised to tight timescales Enthusiasm, drive and personality! Data reviews so as to analyse and summarise data trends Competent and able to use Microsoft Office to a high level (Excel a must ) Desirable: HNC or Degree in a relevant engineering discipline Experience in the offshore and/or subsea industry Knowledge of product certification, best-practice and industry standards Knowledge of compliance standards and certification (CE/DNV) Expert / advanced user of Microsoft Excel. Experience with data archiving / controlled repositories management Previous experience in a customer-facing role General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day to day activities and procedures within the specified role. To maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role. To act ethically, with integrity and in the best interest of the business at all times. To maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. To carry out any other duties as detailed by your Supervisor or Manager from time to time. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. Quality, health, safety and environment (QHSE) Cooperate with the company to achieve a healthy, safe and sustainable working environment. Work in ways that ensure your own safety and that of others; "Do the right thing even when no one is looking." Report any incidents, near misses or other health, safety and environmental concerns. Deliver all products and services in line with Saab Seaeye quality standards to ensure we meet our customer requirements and highlight any quality concerns or potential improvements.
Senior Control & Instrumentation Engineer "Job Details" London, London, United Kingdom and 1 more Job Identification 5170 Locations Posting Date 04/15/2024, 02:41 PM Apply Before 05/01/2024, 02:41 PM Job Description About Us At Technip Energies, we believe in a better tomorrow and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do. Genesis is a global business unit of Technip Energies,providingimpartial consulting services to its clients in traditional hydrocarbon and the energy industries. We have an unrivalled track record of bringing high-impact solutions to clients. Our mission is to be a trusted advisor on the journey to a sustainable future. We're problem solvers who are at the forefront of innovation and our world-class experience, individual expertise and collective wisdom is what differentiates Genesis in today's market. From Engineers and Specialists to Project Managers and Support Staff, spread across 13 countries, our people thrive in a dynamic, proactive business that's balanced with a deep sense of environmental responsibility. Never standing still, we see limitless possibilities for our solutions; and our knowledge sharing, collaboration and innovative thinking are just a few of the ways we fuel our energy for what we do. If you share our determination to drive the transition to a low-carbon future, then this could be the job for you.We offer you not only a job, but an inspiring journey in a truly global environment where you team up to break down boundaries thanks to the innovation, creativity and pioneer spirit which drive our people. What we are looking for An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. Are you early in your career looking to accelerate and expand your professional development whilst making key contributions to early-phase study delivery for major energy transition and conventional energy development projects? Do you enjoy a fast-paced one-team working environment and developing fresh approaches to new challenges? Are you a critical thinker driven to make high-value contributions to key project decision-making? If so, then we would love to hear from you! The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. In addition to multi-discipline study input, there will be opportunities to develop further skills in C&I-focused studies, including Functional Safety, Alarm Management, and Telecommunications as well as supporting Genesis in further developing an understanding of C&I considerations for our ever-growing Energy Transition studies. The position requires a critical and forward-thinking engineer who is happy to take on new challenges with the support of the discipline lead to develop and challenge control and instrumentation concepts working with the latest technology. In return, the position will provide the opportunity to join a growing successful and dynamic team and will present significant opportunities for professional and personal growth, working in Hydrogen Generation, Carbon Capture, Energy Transition, lower carbon energy delivery as well as traditional oil and gas related work. Genesis globally is managed within core services lines (Early Advisory Solutions, Development Solutions and Asset Lifecycle Solutions) and key markets (Low Carbon & CO2 management, Upstream, Downstream, and Renewables and power to X). The Genesis UK Operating Centre (with offices in Aberdeen and London) is organised into core delivery teams providing advisory services globally across these services and markets. You will join the UK Project and Discipline Engineering delivery team, currently comprising circa 50+; engineers, project engineers and study managers, managed in six core discipline study teams comprising; Project Engineering and Operations / Piping, Mechanical and Construction / Electrical / Control, Instrumentation & Telecommunications / Structural, Civil and Marine / Decommissioning . We are looking for someone who will: Key responsibilities of the role require early career Control and Instrumentation Engineering project lifecycle knowledge and will include: Participating in all C&I discipline activities including preparation and checking of documents, philosophies, specifications, procedures, standards, data sheets etc.; Contribute to front-end multi-discipline engineering studies, providing key control and instrumentation input; Brownfield cost estimation for C&I activities; Carry out varied C&I engineering studies as per client scope of work; Participating in safety studies (HAZOP, LOPA etc.); Ensuring instrument, control and telecom discipline design is performed in compliance with project requirements and satisfies all relevant safety and quality standards; Preparation, in conjunction with other disciplines, control and safeguarding philosophies and specifications. Requirements: We'd love to hear from you if you can demonstrate: Degree Qualified in relevant engineering subject; Previous early career experience working as a Control and Instrumentation Engineer; Excellent communication skills and full command of English language (written & spoken); Good broad computer literacy with competence in MS Office applications; Previous experience working in Concept Engineering (Front End / FEED) is an advantage; Working towards Chartered Engineer status is an advantage; North Sea, Oil and Gas Experience is an advantage; Experience in Energy Transition and/or low-carbon energy delivery is an advantage; Functional Safety Experience is an advantage; Alarm Rationalisation Experience is an advantage; Concept Engineering (Front End / FEED) is an advantage; Current offshore survival and medical certificates are an advantage. It is essential that applicants have the right to work in the United Kingdom. We invite you to learn more about our company by visiting and following us on LinkedIn for company updates. "As an equal opportunity employer Technip Energies considers only qualified applicants without regard to colour, age, race, ethnicity, sexual orientation, gender expression, disability, national origin, veteran or marital status." An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. We are seeking a Senior Process Engineer, who will support a wide range of clients on varied and interesting projects related to the energy industry . You will also interface with the wider Genesis organisation through interactions with other discipline teams and a range of clients in the UK and overseas. You will have the opportunity to work in related engineering disciplines based on your career interests, as you work towards Chartered Engineer status. We are currently seeking a Senior Pipeline Engineer to provide input and expertise in the design of subsea pipeline systems at all phases through the design of a system. This will include the execution and delivery of the design of subsea pipelines, risers and tie-in spools in both traditional oil and gas projects as well as Energy Transition such as CCUS, Hydrogen etc. We are currently seeking a Senior Process Engineer to join the UK Process Department. Genesis Process team is a dynamic group working across a range of assignments from traditional upstream oil and gas developments to emerging energy transition technologies. Our work encompasses feasibility assessments and concept selection for new developments through to technical support of mature assets.At Genesis we work in close collaboration with our clients, develop an understanding of their problems before identifying the possible solutions and supporting their decision making process.
Apr 29, 2024
Full time
Senior Control & Instrumentation Engineer "Job Details" London, London, United Kingdom and 1 more Job Identification 5170 Locations Posting Date 04/15/2024, 02:41 PM Apply Before 05/01/2024, 02:41 PM Job Description About Us At Technip Energies, we believe in a better tomorrow and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do. Genesis is a global business unit of Technip Energies,providingimpartial consulting services to its clients in traditional hydrocarbon and the energy industries. We have an unrivalled track record of bringing high-impact solutions to clients. Our mission is to be a trusted advisor on the journey to a sustainable future. We're problem solvers who are at the forefront of innovation and our world-class experience, individual expertise and collective wisdom is what differentiates Genesis in today's market. From Engineers and Specialists to Project Managers and Support Staff, spread across 13 countries, our people thrive in a dynamic, proactive business that's balanced with a deep sense of environmental responsibility. Never standing still, we see limitless possibilities for our solutions; and our knowledge sharing, collaboration and innovative thinking are just a few of the ways we fuel our energy for what we do. If you share our determination to drive the transition to a low-carbon future, then this could be the job for you.We offer you not only a job, but an inspiring journey in a truly global environment where you team up to break down boundaries thanks to the innovation, creativity and pioneer spirit which drive our people. What we are looking for An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. Are you early in your career looking to accelerate and expand your professional development whilst making key contributions to early-phase study delivery for major energy transition and conventional energy development projects? Do you enjoy a fast-paced one-team working environment and developing fresh approaches to new challenges? Are you a critical thinker driven to make high-value contributions to key project decision-making? If so, then we would love to hear from you! The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. In addition to multi-discipline study input, there will be opportunities to develop further skills in C&I-focused studies, including Functional Safety, Alarm Management, and Telecommunications as well as supporting Genesis in further developing an understanding of C&I considerations for our ever-growing Energy Transition studies. The position requires a critical and forward-thinking engineer who is happy to take on new challenges with the support of the discipline lead to develop and challenge control and instrumentation concepts working with the latest technology. In return, the position will provide the opportunity to join a growing successful and dynamic team and will present significant opportunities for professional and personal growth, working in Hydrogen Generation, Carbon Capture, Energy Transition, lower carbon energy delivery as well as traditional oil and gas related work. Genesis globally is managed within core services lines (Early Advisory Solutions, Development Solutions and Asset Lifecycle Solutions) and key markets (Low Carbon & CO2 management, Upstream, Downstream, and Renewables and power to X). The Genesis UK Operating Centre (with offices in Aberdeen and London) is organised into core delivery teams providing advisory services globally across these services and markets. You will join the UK Project and Discipline Engineering delivery team, currently comprising circa 50+; engineers, project engineers and study managers, managed in six core discipline study teams comprising; Project Engineering and Operations / Piping, Mechanical and Construction / Electrical / Control, Instrumentation & Telecommunications / Structural, Civil and Marine / Decommissioning . We are looking for someone who will: Key responsibilities of the role require early career Control and Instrumentation Engineering project lifecycle knowledge and will include: Participating in all C&I discipline activities including preparation and checking of documents, philosophies, specifications, procedures, standards, data sheets etc.; Contribute to front-end multi-discipline engineering studies, providing key control and instrumentation input; Brownfield cost estimation for C&I activities; Carry out varied C&I engineering studies as per client scope of work; Participating in safety studies (HAZOP, LOPA etc.); Ensuring instrument, control and telecom discipline design is performed in compliance with project requirements and satisfies all relevant safety and quality standards; Preparation, in conjunction with other disciplines, control and safeguarding philosophies and specifications. Requirements: We'd love to hear from you if you can demonstrate: Degree Qualified in relevant engineering subject; Previous early career experience working as a Control and Instrumentation Engineer; Excellent communication skills and full command of English language (written & spoken); Good broad computer literacy with competence in MS Office applications; Previous experience working in Concept Engineering (Front End / FEED) is an advantage; Working towards Chartered Engineer status is an advantage; North Sea, Oil and Gas Experience is an advantage; Experience in Energy Transition and/or low-carbon energy delivery is an advantage; Functional Safety Experience is an advantage; Alarm Rationalisation Experience is an advantage; Concept Engineering (Front End / FEED) is an advantage; Current offshore survival and medical certificates are an advantage. It is essential that applicants have the right to work in the United Kingdom. We invite you to learn more about our company by visiting and following us on LinkedIn for company updates. "As an equal opportunity employer Technip Energies considers only qualified applicants without regard to colour, age, race, ethnicity, sexual orientation, gender expression, disability, national origin, veteran or marital status." An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. We are seeking a Senior Process Engineer, who will support a wide range of clients on varied and interesting projects related to the energy industry . You will also interface with the wider Genesis organisation through interactions with other discipline teams and a range of clients in the UK and overseas. You will have the opportunity to work in related engineering disciplines based on your career interests, as you work towards Chartered Engineer status. We are currently seeking a Senior Pipeline Engineer to provide input and expertise in the design of subsea pipeline systems at all phases through the design of a system. This will include the execution and delivery of the design of subsea pipelines, risers and tie-in spools in both traditional oil and gas projects as well as Energy Transition such as CCUS, Hydrogen etc. We are currently seeking a Senior Process Engineer to join the UK Process Department. Genesis Process team is a dynamic group working across a range of assignments from traditional upstream oil and gas developments to emerging energy transition technologies. Our work encompasses feasibility assessments and concept selection for new developments through to technical support of mature assets.At Genesis we work in close collaboration with our clients, develop an understanding of their problems before identifying the possible solutions and supporting their decision making process.
Are you a CNC Machinist who is looking for a new opportunity? Do you have experience of programming on CNC Turner or CNC Vertical Boring machines and want to work on the latest state of the art machines? Have you got experience of working on medium to heavy components? Do you want a company that has excellent benefits including great pension? If this is you, please read below as we have an excellent opportunity in Oldham! Lodestone Recruitment are currently working in partnership with our client in Oldham who have a requirement for a CNC Turner or CNC Vertical Borer. Our client works in various sectors within the heavy engineering sector including Oil & Gas, Defence and Nuclear industries and have recently acquired a number of new machines showing a real sign of investment! Candidates must have the following experience to be considered for the role: Must be apprentice trained or time served CNC Turner or Vertical Borer Machinist with experience of using Hankook machines or similar. Experience of working with medium to large machines making big components. Must be able to fully programme or edit using Fanuc controls Must have experience of one-offs and batch work. Must have worked on heavy engineering sectors such as Oil and Gas, Nuclear, Defence, Subsea or similar sectors. The company is located in Oldham area with good links to M62. The offer for the role of CNC Turner - Salary - 32,000 - 36,000/per annum depending in experience Shifts - Mornings & Afternoons rotational shifts 37.5-hour week with regular overtime paid at T1/2 Pension - Excellent pension 12% company contribution / 5% employee contribution Available overtime This is permanent contract and you will sign a contract with the company. To apply for this CNC Turner vacancy and for immediate consideration, please click 'apply now' or call Nicholas Brennan directly on (phone number removed). Lodestone Recruitment Ltd are acting as an employment agency in relation to this vacancy.
Apr 26, 2024
Full time
Are you a CNC Machinist who is looking for a new opportunity? Do you have experience of programming on CNC Turner or CNC Vertical Boring machines and want to work on the latest state of the art machines? Have you got experience of working on medium to heavy components? Do you want a company that has excellent benefits including great pension? If this is you, please read below as we have an excellent opportunity in Oldham! Lodestone Recruitment are currently working in partnership with our client in Oldham who have a requirement for a CNC Turner or CNC Vertical Borer. Our client works in various sectors within the heavy engineering sector including Oil & Gas, Defence and Nuclear industries and have recently acquired a number of new machines showing a real sign of investment! Candidates must have the following experience to be considered for the role: Must be apprentice trained or time served CNC Turner or Vertical Borer Machinist with experience of using Hankook machines or similar. Experience of working with medium to large machines making big components. Must be able to fully programme or edit using Fanuc controls Must have experience of one-offs and batch work. Must have worked on heavy engineering sectors such as Oil and Gas, Nuclear, Defence, Subsea or similar sectors. The company is located in Oldham area with good links to M62. The offer for the role of CNC Turner - Salary - 32,000 - 36,000/per annum depending in experience Shifts - Mornings & Afternoons rotational shifts 37.5-hour week with regular overtime paid at T1/2 Pension - Excellent pension 12% company contribution / 5% employee contribution Available overtime This is permanent contract and you will sign a contract with the company. To apply for this CNC Turner vacancy and for immediate consideration, please click 'apply now' or call Nicholas Brennan directly on (phone number removed). Lodestone Recruitment Ltd are acting as an employment agency in relation to this vacancy.
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 26, 2024
Contractor
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 26, 2024
Contractor
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 26, 2024
Contractor
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 26, 2024
Contractor
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 26, 2024
Contractor
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 26, 2024
Contractor
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
JAM Recruitment Ltd
Newcastle Upon Tyne, Tyne And Wear
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Apr 26, 2024
Contractor
Principal Mechanical Engineers Initial 12 Month Contract - 2 days per fortnight on site 65.98 per hour (Inside IR35) Company Overview: A global defense, aerospace, and security company, delivering a full range of products and services for air, land, and naval forces, as well as advanced electronics, security, information technology solutions, and customer support services. Our submarines division is at the forefront of technological innovation, producing cutting-edge vessels that are vital to national security. Position Overview: We are seeking highly skilled and experienced Principal Mechanical Engineers. As a Principal Mechanical Engineer, you will play a crucial role in the design, development, and implementation of mechanical systems for state-of-the-art submarine projects. Responsibilities: Be part of a team leading the design and development of mechanical systems for submarines, ensuring compliance with project requirements, technical standards, and regulatory specifications. Collaborate with cross-functional teams including electrical engineers, systems engineers, and naval architects to integrate mechanical systems into overall submarine designs. Conduct analysis, simulation, and testing to validate the performance and reliability of mechanical components and systems. Manage and mentor a team of engineers, providing leadership, guidance, and technical expertise to ensure project success. Interface with internal stakeholders, external partners, and customers to communicate project status, resolve technical issues, and address engineering challenges. Contribute to the continuous improvement of engineering processes, methodologies, and best practices to enhance efficiency, quality, and innovation. Qualifications: Bachelor's degree in Mechanical Engineering or a related field; Master's degree preferred. Minimum of 8 years of experience in mechanical engineering, with a focus on maritime/subsea or submarine systems. Proven track record of delivering complex projects on time and within budget. Deep understanding of mechanical design principles, materials, manufacturing processes, and relevant industry standards. Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and engineering analysis tools (e.g., ANSYS, MATLAB). Excellent communication skills with the ability to effectively collaborate with cross-functional teams and communicate technical concepts to non-technical stakeholders. Strong problem-solving skills, attention to detail, and a commitment to quality and safety. Due to the nature of this role you will need to have excellent team skills, be self-motivated, fast-learning and have the ability to prioritise and manage your own work with minimal guidance. Please be aware you will will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.
Do you have experience in mechanical engineering? Do you have a background in Quality Inspection/Quality Assurance? Are you looking for a new role at a growing company with upward personal potential? If so, then we have just the role for you! Lodestone Recruitment are currently supporting our client in Sheffield who requires a Quality Engineer. This an excellent opportunity to join a growing and dynamic company that has seen plenty of growth over the last year, and looks to continue on its trajectory over the coming years. Our client, a medium-sized heavy engineering company, works across various sectors and have some exciting projects that they are working on as they continue their next phase of growth. The company have lots of new exciting projects coming up within the Nuclear, Defense, Oil & Gas, Subsea sectors, and more! What will be expected of you Compiling and reviewing Quality, Welding, and NDE procedures by customer specifications. Regular surveillance of QA compliance including welding, and NDE records. Liaison with customers through all stages of manufacture to contract completion. Providing excellent customer service to clients. Providing inter-departmental support with contract requirement information. Close liaison with all business functions in addition to QHSE including Production and Projects Review and presentation of lifetime records during manufacture and on contract completion. Assisting in maintaining and continued development/improvement of Quality and Business Management Systems including Health, Safety, and Environmental. What you'll get in return Salary: 40k - 50k Regular days Hours: 37.5-hour week Pension: Market-leading pension! Permanent position Progression and development opportunities To apply for this Quality Engineer vacancy and for immediate consideration, please click 'apply now' or call us on (phone number removed). Lodestone Recruitment Ltd are acting as an employment agency in relation to this vacancy.
Apr 25, 2024
Full time
Do you have experience in mechanical engineering? Do you have a background in Quality Inspection/Quality Assurance? Are you looking for a new role at a growing company with upward personal potential? If so, then we have just the role for you! Lodestone Recruitment are currently supporting our client in Sheffield who requires a Quality Engineer. This an excellent opportunity to join a growing and dynamic company that has seen plenty of growth over the last year, and looks to continue on its trajectory over the coming years. Our client, a medium-sized heavy engineering company, works across various sectors and have some exciting projects that they are working on as they continue their next phase of growth. The company have lots of new exciting projects coming up within the Nuclear, Defense, Oil & Gas, Subsea sectors, and more! What will be expected of you Compiling and reviewing Quality, Welding, and NDE procedures by customer specifications. Regular surveillance of QA compliance including welding, and NDE records. Liaison with customers through all stages of manufacture to contract completion. Providing excellent customer service to clients. Providing inter-departmental support with contract requirement information. Close liaison with all business functions in addition to QHSE including Production and Projects Review and presentation of lifetime records during manufacture and on contract completion. Assisting in maintaining and continued development/improvement of Quality and Business Management Systems including Health, Safety, and Environmental. What you'll get in return Salary: 40k - 50k Regular days Hours: 37.5-hour week Pension: Market-leading pension! Permanent position Progression and development opportunities To apply for this Quality Engineer vacancy and for immediate consideration, please click 'apply now' or call us on (phone number removed). Lodestone Recruitment Ltd are acting as an employment agency in relation to this vacancy.
Role: Estimator Salary: up to £38,000 (more for the right candidate) Bonus: between £2,500 - £5,000 Benefits: Company Pension Scheme and Life Assurance of 4x basic salary Location: Wolverhampton WV13 Hours of work: 8am - 5pm (30 mins lunch) Friday finish at 2pm Experience required: Fasteners (Screws/Nuts/Bolts/Studs/Washers etc) or within a manufacturing industry (steels parts/fittings/flanges supplied to Oil & Gas / Powergen /MOD / Railways etc) The Company: Has over 30 years experience manufacturing special bolts, screws and other components for a range of industries which include: Nuclear Subsea Oil & Gas Petrochemical MOD Power Generation Duties and Responsibilities: Receive customer RFQ's & generate accurate and competitive estimates to assist securing new projects. Liaise directly with the sales team to ensure all/correct information has been supplied to provide an accurate quotation Liaise with production team to determine the most efficient and cost-effective route of manufacture. Collaborate closely with subcontractors / suppliers to gather accurate information necessary for the quotations Provide technical assistance to sales team as/when required. Attend customer meetings to provide technical support on new and existing projects. Ensure all quotations are returned within target 24-48 hour period. Previous experience of customer and international specifications. Analyse and interpret technical drawings, as well as other technical documents. Perform other related duties and participate in special projects as required. Have knowledge of production processes and workflows of products Have good verbal and written communication skills. Demonstrate ability to work independently and in a team environment. Excellent attention to detail.
Apr 24, 2024
Full time
Role: Estimator Salary: up to £38,000 (more for the right candidate) Bonus: between £2,500 - £5,000 Benefits: Company Pension Scheme and Life Assurance of 4x basic salary Location: Wolverhampton WV13 Hours of work: 8am - 5pm (30 mins lunch) Friday finish at 2pm Experience required: Fasteners (Screws/Nuts/Bolts/Studs/Washers etc) or within a manufacturing industry (steels parts/fittings/flanges supplied to Oil & Gas / Powergen /MOD / Railways etc) The Company: Has over 30 years experience manufacturing special bolts, screws and other components for a range of industries which include: Nuclear Subsea Oil & Gas Petrochemical MOD Power Generation Duties and Responsibilities: Receive customer RFQ's & generate accurate and competitive estimates to assist securing new projects. Liaise directly with the sales team to ensure all/correct information has been supplied to provide an accurate quotation Liaise with production team to determine the most efficient and cost-effective route of manufacture. Collaborate closely with subcontractors / suppliers to gather accurate information necessary for the quotations Provide technical assistance to sales team as/when required. Attend customer meetings to provide technical support on new and existing projects. Ensure all quotations are returned within target 24-48 hour period. Previous experience of customer and international specifications. Analyse and interpret technical drawings, as well as other technical documents. Perform other related duties and participate in special projects as required. Have knowledge of production processes and workflows of products Have good verbal and written communication skills. Demonstrate ability to work independently and in a team environment. Excellent attention to detail.
Ernest Gordon Recruitment Limited
Edinburgh, Midlothian
Junior C# Developer (Subsea) Edinburgh £40,000 to £50,000 + Internal Training + Company Benefits + Progression Are you a Junior C# Developer? Are you looking for a very exciting opportunity to progress your career within a very high-end and well established Electronic engineering service company working with underwater equipment? Do you want the opportunity to work in an ever-growing company who have a background of working with clients globally helping develop systems for equipment used 2000 meters down in the depths of our world's largest oceans. On offer is a great opportunity for a Junior C# Developer to use their eye to detail to help analyse and build systems for latest evolving technologies used in deep sea exploration. Working with a highly skilled team to help solve some of the most complex and technical challenges in the industry. The ideal candidate would have a UK driving license and be local to Edinburgh, they would have ample background/an interest in C# and Visual Studio. The Role: Analysing systems, write well-designed code and collaborating with team members Building systems and user interfaces from scratch and making changes Reading data and developing solutions for software solutions The Person: C# Experience Knowledge of Visual Studio Local to Edinburgh
Apr 24, 2024
Full time
Junior C# Developer (Subsea) Edinburgh £40,000 to £50,000 + Internal Training + Company Benefits + Progression Are you a Junior C# Developer? Are you looking for a very exciting opportunity to progress your career within a very high-end and well established Electronic engineering service company working with underwater equipment? Do you want the opportunity to work in an ever-growing company who have a background of working with clients globally helping develop systems for equipment used 2000 meters down in the depths of our world's largest oceans. On offer is a great opportunity for a Junior C# Developer to use their eye to detail to help analyse and build systems for latest evolving technologies used in deep sea exploration. Working with a highly skilled team to help solve some of the most complex and technical challenges in the industry. The ideal candidate would have a UK driving license and be local to Edinburgh, they would have ample background/an interest in C# and Visual Studio. The Role: Analysing systems, write well-designed code and collaborating with team members Building systems and user interfaces from scratch and making changes Reading data and developing solutions for software solutions The Person: C# Experience Knowledge of Visual Studio Local to Edinburgh
Lead Software & Firmware Engineer Company Overview: Our client are a pioneering subsea company based in Edinburgh, specialising in the design and manufacture of innovative IoT devices. Their cutting-edge technology monitors the fatigue of electrical cables underwater and wirelessly transmits critical information via Bluetooth click apply for full job details
Apr 24, 2024
Full time
Lead Software & Firmware Engineer Company Overview: Our client are a pioneering subsea company based in Edinburgh, specialising in the design and manufacture of innovative IoT devices. Their cutting-edge technology monitors the fatigue of electrical cables underwater and wirelessly transmits critical information via Bluetooth click apply for full job details
Introduction Saab UK is a British company that is part of Saab Group's global high-technology operations. Saab offers world-leading solutions and services in defence, aviation, space and civil security. In the UK we bring together the best of Swedish and British innovation and engineering to provide our customers with products and solutions that push boundaries for what is considered technically possible. Our mission is to help our customers to keep people and society safe. Our Saab UK business is going through a period of rapid growth, this means that we can offer a wide range of opportunities for personal fulfilment and career growth. As part of the global entity Saab AB, Saab UK Ltd combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Across the country we have seven principle sites which focus on software engineering, underwater robotics, training services and radars. Globally we number over 22,000 employees and have operations on all continents. Technologically we are leaders in many areas, and we reinvest a high proportion of our earnings in internal research and development. We collaborate with colleagues around the world who all share our challenge - to make the world a safer place. Saab is a company with opportunities, a company where we see diversity as an asset and where you have both considerable responsibility as well as good opportunities for advancing in your career. Additionally, Saab is a company that respects each person's needs for a rewarding life beyond work. Role Purpose: This is a new product testing role within the company. With a wide ranging remit to manage and execute the full lifecycle of test engineering, from definition of test-cases through development of test tools to the execution of testing and management of facilities. As such it will suit someone with a broad spread of engineering knowledge, imagination and drive. Key accountabilities and responsibilities: Analyse conformance specifications to derive test requirements Plan, design and communicate test cases which validate requirements across a broad spread of electro-mechanical systems for both the development and production lifecycle phases. Design test jigs, harnesses and software to allow execution of test cases including, where appropriate, automation. Implement data processing/filtering software in a variety of packages to extract relevant results Manage the internal test facilities (test tanks, ovens, pools, lifting equipment) Liaise with external test facilities (EMC, vibration, pools, etc) Execute tests in a clear, safe and controlled manner Fault finding and failure analysis Documentation and presentation of results and findings. Essential Skills: HNC or Degree in a relevant engineering discipline Min 3 years in a test focussed role, or within test equipment development Proven experience in data capture and analysis Proven experience working on multi-disciplinary systems (electrical, mechanical, software) Experience working within an engineering NPI environment Excellent knowledge of test equipment and platforms Excellent communicator: both written and verbal Exposure to NPI design phases - with working to Design / Systems requirements Able to generate test cases from requirements to verify / validate the designs Experience of National Instruments test software platforms, able to create test software test functions within the National Instruments environment Experience with control of National Instruments hardware and propriety test equipment as in control , read / write, obtain data, compute, data management Hands on with electronic circuit construction / testing / diagnostics Innovative and creative mindset with sound engineering principles Ability to work unsupervised to tight timescales Knowledge of product certification, best-practice and industry standards Enthusiasm, drive and personality! Create high quality test reports Data capture - logging Desirable: Experience in the offshore and/or subsea industry Experience working within a Production Test facility Knowledge / experience in the creation of test executives within NI LabView / TestStand Software Software programming / scripts (Python, C, C#, C++, VB, etc) Specification / build / commissioning / Support of test equipment Understanding of Mechanical principles, and working knowledge of applications Knowledge of compliance standards and certification (CE/DNV) Previous experience in a customer-facing role General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day to day activities and procedures within the specified role. To maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role. To act ethically, with integrity and in the best interest of the business at all times. To maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. To carry out any other duties as detailed by a your Supervisor or Manager from time to time. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. Quality, health, safety and environment (QHSE) Cooperate with the company to achieve a healthy, safe and sustainable working environment. Work in ways that ensure your own safety and that of others; "Do the right thing even when no one is looking." Report any incidents, near misses or other health, safety and environmental concerns. Deliver all products and services in line with Saab Seaeye quality standards to ensure we meet our customer requirements and highlight any quality concerns or potential improvements.
Apr 24, 2024
Full time
Introduction Saab UK is a British company that is part of Saab Group's global high-technology operations. Saab offers world-leading solutions and services in defence, aviation, space and civil security. In the UK we bring together the best of Swedish and British innovation and engineering to provide our customers with products and solutions that push boundaries for what is considered technically possible. Our mission is to help our customers to keep people and society safe. Our Saab UK business is going through a period of rapid growth, this means that we can offer a wide range of opportunities for personal fulfilment and career growth. As part of the global entity Saab AB, Saab UK Ltd combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Across the country we have seven principle sites which focus on software engineering, underwater robotics, training services and radars. Globally we number over 22,000 employees and have operations on all continents. Technologically we are leaders in many areas, and we reinvest a high proportion of our earnings in internal research and development. We collaborate with colleagues around the world who all share our challenge - to make the world a safer place. Saab is a company with opportunities, a company where we see diversity as an asset and where you have both considerable responsibility as well as good opportunities for advancing in your career. Additionally, Saab is a company that respects each person's needs for a rewarding life beyond work. Role Purpose: This is a new product testing role within the company. With a wide ranging remit to manage and execute the full lifecycle of test engineering, from definition of test-cases through development of test tools to the execution of testing and management of facilities. As such it will suit someone with a broad spread of engineering knowledge, imagination and drive. Key accountabilities and responsibilities: Analyse conformance specifications to derive test requirements Plan, design and communicate test cases which validate requirements across a broad spread of electro-mechanical systems for both the development and production lifecycle phases. Design test jigs, harnesses and software to allow execution of test cases including, where appropriate, automation. Implement data processing/filtering software in a variety of packages to extract relevant results Manage the internal test facilities (test tanks, ovens, pools, lifting equipment) Liaise with external test facilities (EMC, vibration, pools, etc) Execute tests in a clear, safe and controlled manner Fault finding and failure analysis Documentation and presentation of results and findings. Essential Skills: HNC or Degree in a relevant engineering discipline Min 3 years in a test focussed role, or within test equipment development Proven experience in data capture and analysis Proven experience working on multi-disciplinary systems (electrical, mechanical, software) Experience working within an engineering NPI environment Excellent knowledge of test equipment and platforms Excellent communicator: both written and verbal Exposure to NPI design phases - with working to Design / Systems requirements Able to generate test cases from requirements to verify / validate the designs Experience of National Instruments test software platforms, able to create test software test functions within the National Instruments environment Experience with control of National Instruments hardware and propriety test equipment as in control , read / write, obtain data, compute, data management Hands on with electronic circuit construction / testing / diagnostics Innovative and creative mindset with sound engineering principles Ability to work unsupervised to tight timescales Knowledge of product certification, best-practice and industry standards Enthusiasm, drive and personality! Create high quality test reports Data capture - logging Desirable: Experience in the offshore and/or subsea industry Experience working within a Production Test facility Knowledge / experience in the creation of test executives within NI LabView / TestStand Software Software programming / scripts (Python, C, C#, C++, VB, etc) Specification / build / commissioning / Support of test equipment Understanding of Mechanical principles, and working knowledge of applications Knowledge of compliance standards and certification (CE/DNV) Previous experience in a customer-facing role General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day to day activities and procedures within the specified role. To maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role. To act ethically, with integrity and in the best interest of the business at all times. To maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. To carry out any other duties as detailed by a your Supervisor or Manager from time to time. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. Quality, health, safety and environment (QHSE) Cooperate with the company to achieve a healthy, safe and sustainable working environment. Work in ways that ensure your own safety and that of others; "Do the right thing even when no one is looking." Report any incidents, near misses or other health, safety and environmental concerns. Deliver all products and services in line with Saab Seaeye quality standards to ensure we meet our customer requirements and highlight any quality concerns or potential improvements.
C# Developer (Subsea) Edinburgh £40,000 to £50,000 + Internal Training + Company Benefits + Progression Are you a C# Developer? Are you looking for a very exciting opportunity to progress your career within a very high-end and well established Electronic engineering service company working with underwater equipment? Do you want the opportunity to work in an ever-growing company who have a backgr click apply for full job details
Apr 24, 2024
Full time
C# Developer (Subsea) Edinburgh £40,000 to £50,000 + Internal Training + Company Benefits + Progression Are you a C# Developer? Are you looking for a very exciting opportunity to progress your career within a very high-end and well established Electronic engineering service company working with underwater equipment? Do you want the opportunity to work in an ever-growing company who have a backgr click apply for full job details
We are currently recruiting for a Senior Software Engineer for one of our key clients based in the Aberdeen region who specialise in the design and manufacture of subsea equipment. Client Details Our client specialises in the design, manufacture and distribution of innovative subsea equipment that is used in multiple industries including Oil & Gas, Defence, Exploration etc. Description As a Senior Software Engineer you will lead and manage a team of Software Engineers as well as provide technical expertise in software engineering design solutions and through life engineering support our clients product range. Your workload can vary from creating software for new product design to meet client or internal specifications through to supporting an existing client's request to upgrade or change software in the field. This includes the maintenance of an extensive library of legacy code. Your main responsibilities within this role will be to provide software engineering design input to new products as well as our existing product range. You will also assess technical queries and provide solutions to a wide-ranging product portfolio. You will liaise with our internal departments such as sales, procurement and production and create software engineering documentation such as specifications, proposals, test plans, reports and manuals. We will also look to you to manage the software team on performance, development, allocation/delegation of work, compliance and general-day-to-day management. You will also play a key role in ensuring that software engineering solutions are provided on time and in budget. There may be some requirement for you to visit other offices and client assets when required. Profile Who we are looking for: Relevant experience in an industrial software and firmware design environment in a senior position Extensive experience in embedded software (MPLAB, ST32) development, test and debug Extensive experience with high level development languages - preferably one or more of PowerBASIC, VB, C# and C++, Dynamic C and C. Good software development knowledge including version control using Azure DevOps and Agile development techniques Experience with network protocol UDP Experience with serial comms protocols over RS485/232, CAN Experience with SQL server/client data base applications Experience with user interface MVC framework Experience with Continuous Integration (CI) tools such as Jenkins Experience with documentation using online Wiki Experience with the following would be advantageous: Product design Siemens STEP7 PLC coding would be advantageous Embedded software in safety critical applications Previous diving equipment design experience would be advantageous Qualifications: Software / Computer Science / Electrical/electronic engineering degree or equivalent industry experience Any relevant diving qualifications would be advantageous Job Offer Salary up to 70k dependent on experience
Feb 25, 2022
Full time
We are currently recruiting for a Senior Software Engineer for one of our key clients based in the Aberdeen region who specialise in the design and manufacture of subsea equipment. Client Details Our client specialises in the design, manufacture and distribution of innovative subsea equipment that is used in multiple industries including Oil & Gas, Defence, Exploration etc. Description As a Senior Software Engineer you will lead and manage a team of Software Engineers as well as provide technical expertise in software engineering design solutions and through life engineering support our clients product range. Your workload can vary from creating software for new product design to meet client or internal specifications through to supporting an existing client's request to upgrade or change software in the field. This includes the maintenance of an extensive library of legacy code. Your main responsibilities within this role will be to provide software engineering design input to new products as well as our existing product range. You will also assess technical queries and provide solutions to a wide-ranging product portfolio. You will liaise with our internal departments such as sales, procurement and production and create software engineering documentation such as specifications, proposals, test plans, reports and manuals. We will also look to you to manage the software team on performance, development, allocation/delegation of work, compliance and general-day-to-day management. You will also play a key role in ensuring that software engineering solutions are provided on time and in budget. There may be some requirement for you to visit other offices and client assets when required. Profile Who we are looking for: Relevant experience in an industrial software and firmware design environment in a senior position Extensive experience in embedded software (MPLAB, ST32) development, test and debug Extensive experience with high level development languages - preferably one or more of PowerBASIC, VB, C# and C++, Dynamic C and C. Good software development knowledge including version control using Azure DevOps and Agile development techniques Experience with network protocol UDP Experience with serial comms protocols over RS485/232, CAN Experience with SQL server/client data base applications Experience with user interface MVC framework Experience with Continuous Integration (CI) tools such as Jenkins Experience with documentation using online Wiki Experience with the following would be advantageous: Product design Siemens STEP7 PLC coding would be advantageous Embedded software in safety critical applications Previous diving equipment design experience would be advantageous Qualifications: Software / Computer Science / Electrical/electronic engineering degree or equivalent industry experience Any relevant diving qualifications would be advantageous Job Offer Salary up to 70k dependent on experience
Aker Solutions are changemakers and accelerators. With a proud history of delivering complex projects to the oil and gas industry, we are looking for talented individuals to help shape the path towards a sustainable energy future. We are looking for a candidate with a quality background to support Aker Solutions subsea projects on a contract position until June 2022. Responsibilities: To ensure compliance to all applicable processes as defined by the Aker Solutions management system and contractual and statutory obligations, where applicable Proactively take control of performance by implementing appropriate measures to eliminate non-conformance, including actioning Lessons Learned and communicating throughout the Subsea business to avoid reoccurrence Identify improvement opportunities and work with the Performance and Transformation network to ensure these opportunities are assessed and driven through to completion Act as focal point of contact for all quality issues on the project, both to client and internal stakeholders Create and manage the Project/Service Quality plans and Inspection & Test Plans, applying knowledge obtained from Quality analysis trends and lessons learnt, and ensure adherence to agreed plans Verify adherence to all relevant processes through attendance of process meetings such as, but not limited to, Tender handovers, project kick off, Design reviews, FAB / PPM Meetings Support Project Managers with the risk register process, ensuring Mitigation action plans for all risks are in place and actions are followed through to completion Raise awareness within the business of risks associated with change management. Monitor adherence to change management process and facilitate change management board reviews as required Take ownership of all critical Investigations relating to your assigned scope of work, either as Lead Investigator or working with Lead investigator to ensure the urgency and momentum is maintained throughout the Investigation to allow a timely root cause conclusion Ensure NCR process compliance, highlighting and challenging areas of concern Role Skills: Strong communication skills with both Internal / external stakeholders Ability to build effective relationships with all stakeholders Be inquisitive and have the ability to challenge when required Analytical, structured and driven to improve business performance Good knowledge of processes in management systems Experience with SAP System, across the subsea execution areas Knowledge of problem solving methodologies Understanding of Lean methodologies Education: ISO 9001 Internal Auditor A recognized Quality Assurance or Quality Management qualification or equivalent HNC/HND or relevant degree Relevant work experience will also be considered With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Infrastructure, Life Sciences, Mining, Automotive and Chemicals sectors worldwide.With more than 100 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Dec 09, 2021
Full time
Aker Solutions are changemakers and accelerators. With a proud history of delivering complex projects to the oil and gas industry, we are looking for talented individuals to help shape the path towards a sustainable energy future. We are looking for a candidate with a quality background to support Aker Solutions subsea projects on a contract position until June 2022. Responsibilities: To ensure compliance to all applicable processes as defined by the Aker Solutions management system and contractual and statutory obligations, where applicable Proactively take control of performance by implementing appropriate measures to eliminate non-conformance, including actioning Lessons Learned and communicating throughout the Subsea business to avoid reoccurrence Identify improvement opportunities and work with the Performance and Transformation network to ensure these opportunities are assessed and driven through to completion Act as focal point of contact for all quality issues on the project, both to client and internal stakeholders Create and manage the Project/Service Quality plans and Inspection & Test Plans, applying knowledge obtained from Quality analysis trends and lessons learnt, and ensure adherence to agreed plans Verify adherence to all relevant processes through attendance of process meetings such as, but not limited to, Tender handovers, project kick off, Design reviews, FAB / PPM Meetings Support Project Managers with the risk register process, ensuring Mitigation action plans for all risks are in place and actions are followed through to completion Raise awareness within the business of risks associated with change management. Monitor adherence to change management process and facilitate change management board reviews as required Take ownership of all critical Investigations relating to your assigned scope of work, either as Lead Investigator or working with Lead investigator to ensure the urgency and momentum is maintained throughout the Investigation to allow a timely root cause conclusion Ensure NCR process compliance, highlighting and challenging areas of concern Role Skills: Strong communication skills with both Internal / external stakeholders Ability to build effective relationships with all stakeholders Be inquisitive and have the ability to challenge when required Analytical, structured and driven to improve business performance Good knowledge of processes in management systems Experience with SAP System, across the subsea execution areas Knowledge of problem solving methodologies Understanding of Lean methodologies Education: ISO 9001 Internal Auditor A recognized Quality Assurance or Quality Management qualification or equivalent HNC/HND or relevant degree Relevant work experience will also be considered With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Infrastructure, Life Sciences, Mining, Automotive and Chemicals sectors worldwide.With more than 100 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.