Important: All applicants must be able to obtain Security Clearance minimum 5 years UK residency Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. The Principal Systems Engineer will be joining the Project/Systems Engineering function in which provides expertise to all projects through the bid and full development lifecycle. It ensures that both project and statutory requirements are met and works to improve the effectiveness of the systems design function within the company. It is responsible for the system architecture and integration of the solution. It is responsible for design for cost and design for manufacture. A professional at this grade applies technical / professional knowledge, making independent judgements based on practice and significant previous experience to support decision making. Often seen as a referral point or more senior team member to escalate more complex problems. Roles will act independently with minimal guidance, and may act as project managers/formal mentors for junior staff. Responsibilities: Take on Project Engineering Lead role, responsible for ensuring the project engineering team develop and deliver a solution that is technically and commercially acceptable. Ensure that the technical solution meets the customer, legislative and business requirements. Ensure that the technical solution is designed, developed and then supported in accordance with the company processes and procedures. Support product certification and compliance approval (all technical aspects, including contractual & legislative). Deliver the systems engineering tasks for a project within on time and on budget, including work package management. Generate, understand, and review user requirements. Perform requirement analysis and flow down to system and sub-system levels. Develop and document system architecture, design, and acceptance and verification strategies. Ensure that specification, design, and acceptance information is fully traceable. Provide input to project schedules through regular and clear progress reports. Support bids by providing technical solutions, estimates, and plans. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Experience in negotiating and agreeing system requirements with customers and stakeholders. Experience of technical leadership of multi-disciplinary teams. Requirements management using a requirements management tool A good appreciation of mechanical, electrical and software engineering principals. Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. For full information, please get in touch!
Apr 30, 2024
Full time
Important: All applicants must be able to obtain Security Clearance minimum 5 years UK residency Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. The Principal Systems Engineer will be joining the Project/Systems Engineering function in which provides expertise to all projects through the bid and full development lifecycle. It ensures that both project and statutory requirements are met and works to improve the effectiveness of the systems design function within the company. It is responsible for the system architecture and integration of the solution. It is responsible for design for cost and design for manufacture. A professional at this grade applies technical / professional knowledge, making independent judgements based on practice and significant previous experience to support decision making. Often seen as a referral point or more senior team member to escalate more complex problems. Roles will act independently with minimal guidance, and may act as project managers/formal mentors for junior staff. Responsibilities: Take on Project Engineering Lead role, responsible for ensuring the project engineering team develop and deliver a solution that is technically and commercially acceptable. Ensure that the technical solution meets the customer, legislative and business requirements. Ensure that the technical solution is designed, developed and then supported in accordance with the company processes and procedures. Support product certification and compliance approval (all technical aspects, including contractual & legislative). Deliver the systems engineering tasks for a project within on time and on budget, including work package management. Generate, understand, and review user requirements. Perform requirement analysis and flow down to system and sub-system levels. Develop and document system architecture, design, and acceptance and verification strategies. Ensure that specification, design, and acceptance information is fully traceable. Provide input to project schedules through regular and clear progress reports. Support bids by providing technical solutions, estimates, and plans. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Experience in negotiating and agreeing system requirements with customers and stakeholders. Experience of technical leadership of multi-disciplinary teams. Requirements management using a requirements management tool A good appreciation of mechanical, electrical and software engineering principals. Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. For full information, please get in touch!
Senior Controls Engineer - Facilities Management - Stevenage - £50,000 Plus excellent benefits This is a fantastic opportunity to join one of the largest Facilities Management companies in the UK at one of their prestigious clients' sites based in Stevenage who are experiencing significant growth. Salary: £50,000 plus excellent benefits Benefits: 25 Days Holiday + BH, Company Pension, Company Sick Pay, Flex Benefits Scheme. Location: Stevenage Hours of work: 8am - 5pm, Monday to Friday Role Responsibilities: Manage the workload of the Controls team including assigning and scheduling tasks / checking on quality and quantity of work carried out, raise work orders. Assisting with business impact assessments (For plant shutdowns or equipment downtime) Carry out reactive work and maintenance PPMs to the BMS system. Provide technical service and support on the BMS system for the maintenance team across the operation. Providing the team with metric data and assisting with them to achieve the numerous KPI's and SLAs on the account. Manage the critical and general alarms on site. Control access to the BMS System alongside the BMS team. Assist with site minor works projects teams and capital projects if required. PLC / VSD commissioning and install for end-of-life replacement. The successful candidate: City & Guilds 18th Edition 236 Part 1&2 or Mechanical equivalent where applicable. BMS system qualifications (Honeywell, Trend, Metasys Etc) Previous experience managing a team of engineers. Proven experience in a Controls Engineer role. Knowledge of the BMS system is essential, preferable Metasys. Good IT skills including Outlook, Word, Excel. Previous experience in an FM environment is essential, pharmaceutical is desirable. An understanding of current Health and Safety regulations and the ability to work unsupervised. The ability to work to prescribed service level agreements. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy. JBRP1_UKTJ
Apr 30, 2024
Full time
Senior Controls Engineer - Facilities Management - Stevenage - £50,000 Plus excellent benefits This is a fantastic opportunity to join one of the largest Facilities Management companies in the UK at one of their prestigious clients' sites based in Stevenage who are experiencing significant growth. Salary: £50,000 plus excellent benefits Benefits: 25 Days Holiday + BH, Company Pension, Company Sick Pay, Flex Benefits Scheme. Location: Stevenage Hours of work: 8am - 5pm, Monday to Friday Role Responsibilities: Manage the workload of the Controls team including assigning and scheduling tasks / checking on quality and quantity of work carried out, raise work orders. Assisting with business impact assessments (For plant shutdowns or equipment downtime) Carry out reactive work and maintenance PPMs to the BMS system. Provide technical service and support on the BMS system for the maintenance team across the operation. Providing the team with metric data and assisting with them to achieve the numerous KPI's and SLAs on the account. Manage the critical and general alarms on site. Control access to the BMS System alongside the BMS team. Assist with site minor works projects teams and capital projects if required. PLC / VSD commissioning and install for end-of-life replacement. The successful candidate: City & Guilds 18th Edition 236 Part 1&2 or Mechanical equivalent where applicable. BMS system qualifications (Honeywell, Trend, Metasys Etc) Previous experience managing a team of engineers. Proven experience in a Controls Engineer role. Knowledge of the BMS system is essential, preferable Metasys. Good IT skills including Outlook, Word, Excel. Previous experience in an FM environment is essential, pharmaceutical is desirable. An understanding of current Health and Safety regulations and the ability to work unsupervised. The ability to work to prescribed service level agreements. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy. JBRP1_UKTJ
Engineer Surveyor - Crane & Lifting Equipment Salary: Basic from £40,500 + Company Car Allowance £5,500, Benefits Location: Peterborough, Cambridgeshire A large Blue-Chip organisation is currently looking for a Crane & Lifting Equipment Engineer Surveyor to cover the Peterborough area. Working on a Monday-Friday basis with flexible working hours, you will be required to visit client sites to make sure all equipment is working to Health & Safety, Quality and Environmental standards. Skills required for an Engineer Surveyor (Crane & Lifting Equipment): Ideally, you will hold an HNC (or Equivalent) in either Mechanical, Aeronautical, Marine or Automotive Engineering. Have hands on experience of maintaining, servicing and repairing or working with various pieces of crane and lifting equipment. Knowledge and Understanding of LOLER & PUWER regulations. Able to work unsupervised and make decisions on the condition and future use of equipment. Able to work at height and in confined spaces. Strong relationship building skills and the ability to influence customers. The ideal candidate must live within a 45-minute radius of Peterborough. The Engineer Surveyor will benefit from: Joining a large organisation who are consistently winning new contracts strengthening their place within the marketplace. A comprehensive training structure with both internal and external training programmes tailored to suit the development of the individual. The Organisation invests £60,000 worth of training in you over a 5-year period. Opportunity to progress into various positions within the business including Management, Technical Specialist and other Senior positions. Ability to organise own working day, unsupervised and meet different clients on a daily basis. Fantastic Benefits Package and regular Performance Reviews. Salary goes up to £45,423 after Year 1 and £50, 347 after Year 2. Benefits: Company Car Allowance, Bonus, Overtime, Pension, 25 Days Holiday (+ Bank Holidays), Healthcare Commutable: Peterborough, Cambridgeshire If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details, contact Andrew McFarlane. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. JBRP1_UKTJ
Apr 30, 2024
Full time
Engineer Surveyor - Crane & Lifting Equipment Salary: Basic from £40,500 + Company Car Allowance £5,500, Benefits Location: Peterborough, Cambridgeshire A large Blue-Chip organisation is currently looking for a Crane & Lifting Equipment Engineer Surveyor to cover the Peterborough area. Working on a Monday-Friday basis with flexible working hours, you will be required to visit client sites to make sure all equipment is working to Health & Safety, Quality and Environmental standards. Skills required for an Engineer Surveyor (Crane & Lifting Equipment): Ideally, you will hold an HNC (or Equivalent) in either Mechanical, Aeronautical, Marine or Automotive Engineering. Have hands on experience of maintaining, servicing and repairing or working with various pieces of crane and lifting equipment. Knowledge and Understanding of LOLER & PUWER regulations. Able to work unsupervised and make decisions on the condition and future use of equipment. Able to work at height and in confined spaces. Strong relationship building skills and the ability to influence customers. The ideal candidate must live within a 45-minute radius of Peterborough. The Engineer Surveyor will benefit from: Joining a large organisation who are consistently winning new contracts strengthening their place within the marketplace. A comprehensive training structure with both internal and external training programmes tailored to suit the development of the individual. The Organisation invests £60,000 worth of training in you over a 5-year period. Opportunity to progress into various positions within the business including Management, Technical Specialist and other Senior positions. Ability to organise own working day, unsupervised and meet different clients on a daily basis. Fantastic Benefits Package and regular Performance Reviews. Salary goes up to £45,423 after Year 1 and £50, 347 after Year 2. Benefits: Company Car Allowance, Bonus, Overtime, Pension, 25 Days Holiday (+ Bank Holidays), Healthcare Commutable: Peterborough, Cambridgeshire If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details, contact Andrew McFarlane. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details. JBRP1_UKTJ
Role synopsis: An integral part of bp's transition from an International Oil Company to an Integrated Energy Company is the entry of electrical vehicle (EV) charging markets in key countries e.g. Germany, UK, US and China. Our mission is to create the fastest and most convenient charger network in the markets we operate in. This is an opportunity to join a business with an envious position in a fast-growing business, and ultimately help enable more people to transition to electric vehicles. You will not just be part of the biggest change in the automotive industry for a century - you will be at the forefront of it as we shape the EV charging market in key regions. The Site Electrical Leader / Electrical Duty Holder role plays a key part in the EV roll out and operations in the UK by ensuring compliance of the network and managing the interface with IDNOs, ICPs and EPC Contractors. You will be at the fore front as the main point of contact for DNOs/DSOs, IDNOs and ICPs liaison and network issues. Success is contributing to the fast-paced role out of charging solutions, through quality design solutions whilst facing the challenges of complex brownfield and greenfield sites. Key accountabilities: Electrical Duty Holder for entire BP Pulse LV and HV electrical distribution network in the UK Responsible for all areas of site electrical compliance and electrical site infrastructure up to 33kV Ownership of Electrical Standards, Safety Rules and Operational Practices and Procedures Promote a safety conscious working environment where all engineering personnel adopt safe working practices Performance Management of the IDNOs, ICPs and EPC Contractors, conducting monthly oversight and management meetings to ensure all targets are met Development and ownership of BP Pulse Power Resilience Risk Register, reducing power-related disruption Lead RCAs solving complex electrical issues and establishing preventative measures Maintain regular contact with the O&M Team to ensure maintenance issues are being dealt with effectively Acting as Authorising Officer and Network Control Manager Prepare and/or approve all switching schedules, outages/shutdowns and sign-off of Permits to Work and energisation certificates Provide technical guidance and decision making on development and power needs, improving understanding of the associated risk across the BP Pulse network in the UK Support the UK Engineering Team Leader and Global Substation Manger creating a standard design model that can be deployed and quality detailed design produced for the installation of the chosen solutions Support all teams during site appraisal, network planning, procurement, installation, construction and commissioning/go-live Alert the Execution Manager and UK Engineering Team Leader on any identified risks within his / her responsibility Capture Lessons Learned through engineering and installation delivery and ensure Continuous Improvement throughout our EV deployments Education: Must have Electrical HNC or equivalent Preferably a university degree in Engineering Essential experience: 5+ years of Senior Authorised Person (SAP) experience Strong technical knowledge of LV, HV and EHV systems, standards, regulations, constraints, and requirements Experience working for IDNOs, DSOs, TSO, ICPs or Power System Consultancies Strong interpersonal skills with the ability to build relationships with external parties Good organisational and analytical skills A strong track record in project delivery or in supporting complex Project management Fluent in English Desirable Experience Chartered Engineer or equivalent (working towards with imminent application would be considered) Experience leading multi-cultural teams Demonstrated ability to integrate engineering on projects covering different countries and use cases Engineering rollout in the EV field 8-15 years' experience in large scale engineering projects Broad professional experience in engineering and project management delivery Sound knowledge of EV charging technology and thorough understanding of the operation and structures of charging networks and how they are integrated. Direct experience of industry standards in the EV space. Agile Project management. Multilingual Related Jobs Contract 15 Jan 2024 Sr Software Engineer Vacancy Overview Senior Software Engineer Airswift is an international Dear all, Our client seeks an experienced Senior Electrical Engineer to join Position: Civil and Mechanical Inspector, Solar Location: On construction site Don't see a job for you? Register for our candidate portal Sign in or register for Airswift Digital to stay updated with recommended jobs.
Apr 30, 2024
Full time
Role synopsis: An integral part of bp's transition from an International Oil Company to an Integrated Energy Company is the entry of electrical vehicle (EV) charging markets in key countries e.g. Germany, UK, US and China. Our mission is to create the fastest and most convenient charger network in the markets we operate in. This is an opportunity to join a business with an envious position in a fast-growing business, and ultimately help enable more people to transition to electric vehicles. You will not just be part of the biggest change in the automotive industry for a century - you will be at the forefront of it as we shape the EV charging market in key regions. The Site Electrical Leader / Electrical Duty Holder role plays a key part in the EV roll out and operations in the UK by ensuring compliance of the network and managing the interface with IDNOs, ICPs and EPC Contractors. You will be at the fore front as the main point of contact for DNOs/DSOs, IDNOs and ICPs liaison and network issues. Success is contributing to the fast-paced role out of charging solutions, through quality design solutions whilst facing the challenges of complex brownfield and greenfield sites. Key accountabilities: Electrical Duty Holder for entire BP Pulse LV and HV electrical distribution network in the UK Responsible for all areas of site electrical compliance and electrical site infrastructure up to 33kV Ownership of Electrical Standards, Safety Rules and Operational Practices and Procedures Promote a safety conscious working environment where all engineering personnel adopt safe working practices Performance Management of the IDNOs, ICPs and EPC Contractors, conducting monthly oversight and management meetings to ensure all targets are met Development and ownership of BP Pulse Power Resilience Risk Register, reducing power-related disruption Lead RCAs solving complex electrical issues and establishing preventative measures Maintain regular contact with the O&M Team to ensure maintenance issues are being dealt with effectively Acting as Authorising Officer and Network Control Manager Prepare and/or approve all switching schedules, outages/shutdowns and sign-off of Permits to Work and energisation certificates Provide technical guidance and decision making on development and power needs, improving understanding of the associated risk across the BP Pulse network in the UK Support the UK Engineering Team Leader and Global Substation Manger creating a standard design model that can be deployed and quality detailed design produced for the installation of the chosen solutions Support all teams during site appraisal, network planning, procurement, installation, construction and commissioning/go-live Alert the Execution Manager and UK Engineering Team Leader on any identified risks within his / her responsibility Capture Lessons Learned through engineering and installation delivery and ensure Continuous Improvement throughout our EV deployments Education: Must have Electrical HNC or equivalent Preferably a university degree in Engineering Essential experience: 5+ years of Senior Authorised Person (SAP) experience Strong technical knowledge of LV, HV and EHV systems, standards, regulations, constraints, and requirements Experience working for IDNOs, DSOs, TSO, ICPs or Power System Consultancies Strong interpersonal skills with the ability to build relationships with external parties Good organisational and analytical skills A strong track record in project delivery or in supporting complex Project management Fluent in English Desirable Experience Chartered Engineer or equivalent (working towards with imminent application would be considered) Experience leading multi-cultural teams Demonstrated ability to integrate engineering on projects covering different countries and use cases Engineering rollout in the EV field 8-15 years' experience in large scale engineering projects Broad professional experience in engineering and project management delivery Sound knowledge of EV charging technology and thorough understanding of the operation and structures of charging networks and how they are integrated. Direct experience of industry standards in the EV space. Agile Project management. Multilingual Related Jobs Contract 15 Jan 2024 Sr Software Engineer Vacancy Overview Senior Software Engineer Airswift is an international Dear all, Our client seeks an experienced Senior Electrical Engineer to join Position: Civil and Mechanical Inspector, Solar Location: On construction site Don't see a job for you? Register for our candidate portal Sign in or register for Airswift Digital to stay updated with recommended jobs.
Important: All applicants must be able to obtain Security Clearance minimum 5 years UK residency Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. The Principal Systems Engineer will be joining the Project/Systems Engineering function in which provides expertise to all projects through the bid and full development lifecycle. It ensures that both project and statutory requirements are met and works to improve the effectiveness of the systems design function within the company. It is responsible for the system architecture and integration of the solution. It is responsible for design for cost and design for manufacture. A professional at this grade applies technical / professional knowledge, making independent judgements based on practice and significant previous experience to support decision making. Often seen as a referral point or more senior team member to escalate more complex problems. Roles will act independently with minimal guidance, and may act as project managers/formal mentors for junior staff. Responsibilities: Take on Project Engineering Lead role, responsible for ensuring the project engineering team develop and deliver a solution that is technically and commercially acceptable. Ensure that the technical solution meets the customer, legislative and business requirements. Ensure that the technical solution is designed, developed and then supported in accordance with the company processes and procedures. Support product certification and compliance approval (all technical aspects, including contractual & legislative). Deliver the systems engineering tasks for a project within on time and on budget, including work package management. Generate, understand, and review user requirements. Perform requirement analysis and flow down to system and sub-system levels. Develop and document system architecture, design, and acceptance and verification strategies. Ensure that specification, design, and acceptance information is fully traceable. Provide input to project schedules through regular and clear progress reports. Support bids by providing technical solutions, estimates, and plans. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Experience in negotiating and agreeing system requirements with customers and stakeholders. Experience of technical leadership of multi-disciplinary teams. Requirements management using a requirements management tool A good appreciation of mechanical, electrical and software engineering principals. Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. For full information, please get in touch!
Apr 30, 2024
Full time
Important: All applicants must be able to obtain Security Clearance minimum 5 years UK residency Working: The role is office/hybrid based with occasional travel to other company/customer's sites in the UK or abroad. The Principal Systems Engineer will be joining the Project/Systems Engineering function in which provides expertise to all projects through the bid and full development lifecycle. It ensures that both project and statutory requirements are met and works to improve the effectiveness of the systems design function within the company. It is responsible for the system architecture and integration of the solution. It is responsible for design for cost and design for manufacture. A professional at this grade applies technical / professional knowledge, making independent judgements based on practice and significant previous experience to support decision making. Often seen as a referral point or more senior team member to escalate more complex problems. Roles will act independently with minimal guidance, and may act as project managers/formal mentors for junior staff. Responsibilities: Take on Project Engineering Lead role, responsible for ensuring the project engineering team develop and deliver a solution that is technically and commercially acceptable. Ensure that the technical solution meets the customer, legislative and business requirements. Ensure that the technical solution is designed, developed and then supported in accordance with the company processes and procedures. Support product certification and compliance approval (all technical aspects, including contractual & legislative). Deliver the systems engineering tasks for a project within on time and on budget, including work package management. Generate, understand, and review user requirements. Perform requirement analysis and flow down to system and sub-system levels. Develop and document system architecture, design, and acceptance and verification strategies. Ensure that specification, design, and acceptance information is fully traceable. Provide input to project schedules through regular and clear progress reports. Support bids by providing technical solutions, estimates, and plans. Experience needed: Ideally qualified to degree-level or equivalent experience in a Physics or Engineering based subject, such as; Electronics, Hardware, Computer Science, Software or Systems Engineering etc. Experience in negotiating and agreeing system requirements with customers and stakeholders. Experience of technical leadership of multi-disciplinary teams. Requirements management using a requirements management tool A good appreciation of mechanical, electrical and software engineering principals. Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. For full information, please get in touch!
Your New Organisation My client is a leading global consultancy specialising in infrastructure services. This role will be working closely with the healthcare sector developing innovative projects that enhance patient care and improve healthcare facilities. Your New Role As a Senior Mechanical Engineer, you'll play a crucial role in designing and delivering mechanical building services for healthcare click apply for full job details
Apr 30, 2024
Full time
Your New Organisation My client is a leading global consultancy specialising in infrastructure services. This role will be working closely with the healthcare sector developing innovative projects that enhance patient care and improve healthcare facilities. Your New Role As a Senior Mechanical Engineer, you'll play a crucial role in designing and delivering mechanical building services for healthcare click apply for full job details
We are actively seeking a dynamic and skilled Procurement or Project Specialist to join a defense organization based in the West Midlands. The chosen candidate will play a pivotal role in identifying and establishing a new subcontract supply chain for a significant engineering project. Responsibilities include evaluating engineering requirements, nurturing supplier capabilities, and overseeing the selected solution from conception to the completion of prototypes, ensuring smooth integration into our supply chain network. Given the nature of the role, frequent travel to supplier sites is essential, requiring a full driver's license. Key Responsibilities: Spearhead comprehensive management of subcontract manufacturing, collaborating with cross-functional teams to align project goals and objectives. Quickly gain a profound understanding of the technical intricacies of the product and its manufacturing process, enabling effective anticipation of challenges and opportunities with the support of senior engineers. Foster robust relationships with subcontractors, ensuring clear expectations, open communication, and adherence to project timelines and quality standards. Apply a strategic yet assertive approach for effective problem-solving. Maintain a consistent presence at subcontractor facilities to actively oversee and ensure adherence to project timelines. Identify, evaluate, and onboard potential motor subcontractors aligned with technical and quality standards. Lead contract negotiations and establish strong relationships, ensuring supplier capabilities and financial stability meet project needs. Collaborate with cross-functional teams to proactively identify and mitigate supply chain risks. Ensure strict adherence to compliance standards through meticulous documentation and checks, collaborating cross-functionally to maintain cost efficiencies while upholding regulatory requirements. Manage tracking tools, submitting regular progress reports to the supply chain manager and the wider project team and stakeholders. Ensure a well-documented supplier identification, selection, and onboarding process, involving relevant stakeholders and meeting essential requirements. Monitor market trends, supplier capabilities, and economic factors to safeguard project timelines and objectives. Qualifications: CIPS - Desirable Possess a Bachelor's degree in engineering, business management, or a related field. Demonstrate proven experience in procurement, project management, or supplier relationship roles in a technically demanding environment. Showcase knowledge of electromechanical manufacturing techniques (electrical motors preferred). Exhibit excellent leadership and interpersonal skills, with the confidence to challenge and negotiate with suppliers when needed. Display strong communication skills supporting an ability to convey key technical information between internal and external stakeholders. Be detail-oriented and analytical, maintaining excellent technical and quality control standards. Have experience working within a team-based, multidisciplinary environment. Demonstrate familiarity with Defense industry regulations and compliance standards. Possess proficiency in project management tools and methodologies, as well as MS Office. Be proficient in ERP systems, Excel, and project management tools. Be willing to regularly travel to subcontractor facilities and supplier sites.
Apr 30, 2024
Full time
We are actively seeking a dynamic and skilled Procurement or Project Specialist to join a defense organization based in the West Midlands. The chosen candidate will play a pivotal role in identifying and establishing a new subcontract supply chain for a significant engineering project. Responsibilities include evaluating engineering requirements, nurturing supplier capabilities, and overseeing the selected solution from conception to the completion of prototypes, ensuring smooth integration into our supply chain network. Given the nature of the role, frequent travel to supplier sites is essential, requiring a full driver's license. Key Responsibilities: Spearhead comprehensive management of subcontract manufacturing, collaborating with cross-functional teams to align project goals and objectives. Quickly gain a profound understanding of the technical intricacies of the product and its manufacturing process, enabling effective anticipation of challenges and opportunities with the support of senior engineers. Foster robust relationships with subcontractors, ensuring clear expectations, open communication, and adherence to project timelines and quality standards. Apply a strategic yet assertive approach for effective problem-solving. Maintain a consistent presence at subcontractor facilities to actively oversee and ensure adherence to project timelines. Identify, evaluate, and onboard potential motor subcontractors aligned with technical and quality standards. Lead contract negotiations and establish strong relationships, ensuring supplier capabilities and financial stability meet project needs. Collaborate with cross-functional teams to proactively identify and mitigate supply chain risks. Ensure strict adherence to compliance standards through meticulous documentation and checks, collaborating cross-functionally to maintain cost efficiencies while upholding regulatory requirements. Manage tracking tools, submitting regular progress reports to the supply chain manager and the wider project team and stakeholders. Ensure a well-documented supplier identification, selection, and onboarding process, involving relevant stakeholders and meeting essential requirements. Monitor market trends, supplier capabilities, and economic factors to safeguard project timelines and objectives. Qualifications: CIPS - Desirable Possess a Bachelor's degree in engineering, business management, or a related field. Demonstrate proven experience in procurement, project management, or supplier relationship roles in a technically demanding environment. Showcase knowledge of electromechanical manufacturing techniques (electrical motors preferred). Exhibit excellent leadership and interpersonal skills, with the confidence to challenge and negotiate with suppliers when needed. Display strong communication skills supporting an ability to convey key technical information between internal and external stakeholders. Be detail-oriented and analytical, maintaining excellent technical and quality control standards. Have experience working within a team-based, multidisciplinary environment. Demonstrate familiarity with Defense industry regulations and compliance standards. Possess proficiency in project management tools and methodologies, as well as MS Office. Be proficient in ERP systems, Excel, and project management tools. Be willing to regularly travel to subcontractor facilities and supplier sites.
Do you want to be part of a growing industry that is actively contributing to our net-zero future? Are you experienced in designing and implementing solar PV systems? Do you want to work on international projects and provide value on a global scale? If this sounds like you, or you're curious to learn more, then this role could be the perfect opportunity. Join our Power Systems department as our new Senior Solar PV Engineer and work with us to close the gap to a sustainable future. Your new role As our new Senior Solar PV Engineer, you will contribute to developing solar PV solutions to clients who seek technical excellence, efficiency and sustainability. Our highly skilled solar colleagues around the world are working on various consulting projects, starting with pre-feasibility, feasibility, design, tendering support, construction and commissioning planning and supervision, O&M planning and monitoring. As we are a growing, we hope that you can contribute to the team with proactive approach and desire to work in an international environment. Your key responsibilities will be: Taking ownership of delivery of consultancy projects in Solar PV sector. The projects range from conceptual stage through detailed engineering to owner's engineering services during execution. Developing technical solutions including designing solar PV layout for commercial and utility projects , optimising the size of the plant, managing the assessment of associated infrastructure such as structural assessment, land assessment etc. Liaising with electrical engineers, BESS experts and planning consultant to ensure the successful delivery of the projects Liaising with suppliers and contractors to obtain the proposals and develop project costing Supporting the development of solar PV business plan Due diligence and providing technical input to proposals and bids Representing Ramboll in conferences and renewable energy events Training and guiding junior members of the team Supporting the development inhouse tools and templates Your new team You will be part of the Solar PV Centre of Competence in Power Systems, as part of the wider Energy division. Ramboll is at the forefront of addressing the green transition and offers a holistic approach to energy that supports the sector on the journey towards more sustainable solutions. With 2,000 experts in 14 countries, covering the full spectrum of technologies and all parts of the value chain from production and transmission to distribution, we plan, design and implement energy solutions all over the world . About you From the moment you start at Ramboll, we will support your personal and professional development so that you can continue to grow with the company. Whilst we look forward to supporting your continued learning and development, for this role we have identified some qualifications, skills, and capabilities that will set you up for success. These include: Mechanical/Electrical/Energy Engineer, Degree level qualified Proven experience in Solar PV or renewable energy sector Strong understanding of UK renewable energy markets Excellent renewable energy project management skills Excellent technical skills including familiarity with commercial solar PV design software such as PVsyst What we can offer you Investment in your development Leaders you can count on, guided by our Leadership Principles Be valued for the unique person you are Never be short of inspiration from colleagues, clients, and projects The long-term thinking of a foundation-owned company Working on flagship projects including hybrid solar parks Flexible and supportive work environment Work at the heart of sustainable change Ramboll is a global architecture, engineering, and consultancy company. We believe that the purpose of sustainable change is to create a thriving world for both nature and people. So, that's where we start - and how we work. At Ramboll, our core strength is our people, and our history is rooted in a clear vision of how a responsible company should act. Being open and curious is a cornerstone of our culture. We embrace an inclusive mindset that looks for fresh, diverse, and innovative perspectives. We respect, embrace, and invite diversity in all forms to actively cultivate an environment where everyone can flourish and realise their full potential. Ready to join us? Please submit your application. Be sure to include all relevant documents including your CV, cover letter, etc. We recognise that some candidates only apply when they tick every box. However, passion and potential often outweigh a perfect resume and Ramboll's supportive learning culture can help you grow. So if this role resonates with you but you don't meet all the requirements, we encourage you to apply. You might be the perfect fit for this opportunity or another within our team. Thank you for taking the time to apply! We look forward to receiving your application. About Ramboll Founded in Denmark, Ramboll is a foundation-owned people company. We have more than 18,000 experts working across our global operations in 35 countries. Our experts are leaders in their fields, developing and delivering innovative solutions in diverse markets including Buildings, Transport, Planning & Urban Design, Water, Environment & Health, Energy, and Management Consulting. We invite you to contribute to a more sustainable future working in an open, collaborative, and empowering company. Combining local experience with global knowledge, we together shape the societies of tomorrow. Equality, diversity, and inclusion is at the heart of what we do We believe in the strength of diversity and know that unique experiences and perspectives are vital for creating truly sustainable societies. Therefore, we are committed to providing an inclusive and supportive work environment where everyone can flourish and reach their potential. We welcome applications from candidates of all backgrounds and encourage you to contact our recruitment team to discuss any accommodations you need during the application process. Buildings, Transport, Energy, Environment & Health, Water and Management Consulting
Apr 30, 2024
Full time
Do you want to be part of a growing industry that is actively contributing to our net-zero future? Are you experienced in designing and implementing solar PV systems? Do you want to work on international projects and provide value on a global scale? If this sounds like you, or you're curious to learn more, then this role could be the perfect opportunity. Join our Power Systems department as our new Senior Solar PV Engineer and work with us to close the gap to a sustainable future. Your new role As our new Senior Solar PV Engineer, you will contribute to developing solar PV solutions to clients who seek technical excellence, efficiency and sustainability. Our highly skilled solar colleagues around the world are working on various consulting projects, starting with pre-feasibility, feasibility, design, tendering support, construction and commissioning planning and supervision, O&M planning and monitoring. As we are a growing, we hope that you can contribute to the team with proactive approach and desire to work in an international environment. Your key responsibilities will be: Taking ownership of delivery of consultancy projects in Solar PV sector. The projects range from conceptual stage through detailed engineering to owner's engineering services during execution. Developing technical solutions including designing solar PV layout for commercial and utility projects , optimising the size of the plant, managing the assessment of associated infrastructure such as structural assessment, land assessment etc. Liaising with electrical engineers, BESS experts and planning consultant to ensure the successful delivery of the projects Liaising with suppliers and contractors to obtain the proposals and develop project costing Supporting the development of solar PV business plan Due diligence and providing technical input to proposals and bids Representing Ramboll in conferences and renewable energy events Training and guiding junior members of the team Supporting the development inhouse tools and templates Your new team You will be part of the Solar PV Centre of Competence in Power Systems, as part of the wider Energy division. Ramboll is at the forefront of addressing the green transition and offers a holistic approach to energy that supports the sector on the journey towards more sustainable solutions. With 2,000 experts in 14 countries, covering the full spectrum of technologies and all parts of the value chain from production and transmission to distribution, we plan, design and implement energy solutions all over the world . About you From the moment you start at Ramboll, we will support your personal and professional development so that you can continue to grow with the company. Whilst we look forward to supporting your continued learning and development, for this role we have identified some qualifications, skills, and capabilities that will set you up for success. These include: Mechanical/Electrical/Energy Engineer, Degree level qualified Proven experience in Solar PV or renewable energy sector Strong understanding of UK renewable energy markets Excellent renewable energy project management skills Excellent technical skills including familiarity with commercial solar PV design software such as PVsyst What we can offer you Investment in your development Leaders you can count on, guided by our Leadership Principles Be valued for the unique person you are Never be short of inspiration from colleagues, clients, and projects The long-term thinking of a foundation-owned company Working on flagship projects including hybrid solar parks Flexible and supportive work environment Work at the heart of sustainable change Ramboll is a global architecture, engineering, and consultancy company. We believe that the purpose of sustainable change is to create a thriving world for both nature and people. So, that's where we start - and how we work. At Ramboll, our core strength is our people, and our history is rooted in a clear vision of how a responsible company should act. Being open and curious is a cornerstone of our culture. We embrace an inclusive mindset that looks for fresh, diverse, and innovative perspectives. We respect, embrace, and invite diversity in all forms to actively cultivate an environment where everyone can flourish and realise their full potential. Ready to join us? Please submit your application. Be sure to include all relevant documents including your CV, cover letter, etc. We recognise that some candidates only apply when they tick every box. However, passion and potential often outweigh a perfect resume and Ramboll's supportive learning culture can help you grow. So if this role resonates with you but you don't meet all the requirements, we encourage you to apply. You might be the perfect fit for this opportunity or another within our team. Thank you for taking the time to apply! We look forward to receiving your application. About Ramboll Founded in Denmark, Ramboll is a foundation-owned people company. We have more than 18,000 experts working across our global operations in 35 countries. Our experts are leaders in their fields, developing and delivering innovative solutions in diverse markets including Buildings, Transport, Planning & Urban Design, Water, Environment & Health, Energy, and Management Consulting. We invite you to contribute to a more sustainable future working in an open, collaborative, and empowering company. Combining local experience with global knowledge, we together shape the societies of tomorrow. Equality, diversity, and inclusion is at the heart of what we do We believe in the strength of diversity and know that unique experiences and perspectives are vital for creating truly sustainable societies. Therefore, we are committed to providing an inclusive and supportive work environment where everyone can flourish and reach their potential. We welcome applications from candidates of all backgrounds and encourage you to contact our recruitment team to discuss any accommodations you need during the application process. Buildings, Transport, Energy, Environment & Health, Water and Management Consulting
Job Title: Multiskilled Engineer Salary: From £57,273 per year (inclusive of shift allowance) Shift pattern: Continental shift - 42.5 hours per week Location: Milton Keynes What we're looking for AG Barr are looking for Multiskilled Engineers to ensure that all machinery and equipment is installed, maintained and operated to maximise production output and efficiencies. Our large factories produce multi formats across a number of high speed modern lines, producing to high quality standards whilst maximising production outputs and minimising overhead costs. The Multiskilled Engineer is part of a team of Technicians reporting to the Senior Engineering Technician. Your responsibilities will include As a Mechanical Engineer or Electrical Engineer your responsibilities will include; Carry out planned maintenance programmes and schedules recommending improvements where appropriate, to ensure efficiencies are maximised. Carry out fault diagnosis and repair breakdowns promptly to ensure downtime is minimised. Analyse line efficiency, wastage and downtime data with a view to identifying areas for performance improvement. Carry out all duties in accordance with safe working practices and factory hygiene standards. Produce detailed written reports when and where required i.e. downtime sheets and line log books. Identifying faulty equipment by consulting manufacturer's manuals & reading detailed mechanical exploded drawings to resource and order replacement parts Operate machinery if required to ensure efficient manufacturing team working. Proactive approach to production line equipment with the implementation of Continuous Improvements to drive better performance. What you'll bring The successful candidate will have; Been educated to City & Guilds level or equivalent in a Mechanical/Electrical engineering discipline. Electrically biased Preferably experienced within a multi skilled food manufacturing or FMCG environment. In depth knowledge of maintenance systems and processes. Proven knowledge and experience of initiating and implementing continuous improvements, lean manufacturing and Six sigma techniques. Strong IT skills. Good decision making skills, confident and approachable. What we offer We believe in creating a diverse and inclusive culture where your voice can be heard. Our skilled, loyal and committed people are critical to the future success of AG Barr which is why we are continually investing in our employees to develop their talent. We look after our employees by offering a competitive salary and benefits package which includes; 33 days holiday Flexible holiday trading Living Wage Employer Healthcare Cash Plan Flexible benefits e.g. discounts & cashbacks, gym memberships, technology purchases etc Life assurance Save as you earn scheme Staff sales discount Free AG Barr products throughout your working day Pension Annual salary review Ongoing professional development And much more! To find out more about what it is like to work for AG Barr, please visit our careers platform here. We are an equal opportunities employer and happy to discuss any reasonable adjustments that may be needed for successful candidates with a disability, health or mental health condition. While we have highlighted our ideal requirements for this role, we are realistic that the successful candidate probably won't meet every single requirement in this advert, but we are big advocates of people growing in role. So even if you don't meet every single requirement, we encourage you to submit an application - you may be just what we are looking for! Apply now! Speculative CVs from agencies will not be accepted. INDENGINEER
Apr 30, 2024
Full time
Job Title: Multiskilled Engineer Salary: From £57,273 per year (inclusive of shift allowance) Shift pattern: Continental shift - 42.5 hours per week Location: Milton Keynes What we're looking for AG Barr are looking for Multiskilled Engineers to ensure that all machinery and equipment is installed, maintained and operated to maximise production output and efficiencies. Our large factories produce multi formats across a number of high speed modern lines, producing to high quality standards whilst maximising production outputs and minimising overhead costs. The Multiskilled Engineer is part of a team of Technicians reporting to the Senior Engineering Technician. Your responsibilities will include As a Mechanical Engineer or Electrical Engineer your responsibilities will include; Carry out planned maintenance programmes and schedules recommending improvements where appropriate, to ensure efficiencies are maximised. Carry out fault diagnosis and repair breakdowns promptly to ensure downtime is minimised. Analyse line efficiency, wastage and downtime data with a view to identifying areas for performance improvement. Carry out all duties in accordance with safe working practices and factory hygiene standards. Produce detailed written reports when and where required i.e. downtime sheets and line log books. Identifying faulty equipment by consulting manufacturer's manuals & reading detailed mechanical exploded drawings to resource and order replacement parts Operate machinery if required to ensure efficient manufacturing team working. Proactive approach to production line equipment with the implementation of Continuous Improvements to drive better performance. What you'll bring The successful candidate will have; Been educated to City & Guilds level or equivalent in a Mechanical/Electrical engineering discipline. Electrically biased Preferably experienced within a multi skilled food manufacturing or FMCG environment. In depth knowledge of maintenance systems and processes. Proven knowledge and experience of initiating and implementing continuous improvements, lean manufacturing and Six sigma techniques. Strong IT skills. Good decision making skills, confident and approachable. What we offer We believe in creating a diverse and inclusive culture where your voice can be heard. Our skilled, loyal and committed people are critical to the future success of AG Barr which is why we are continually investing in our employees to develop their talent. We look after our employees by offering a competitive salary and benefits package which includes; 33 days holiday Flexible holiday trading Living Wage Employer Healthcare Cash Plan Flexible benefits e.g. discounts & cashbacks, gym memberships, technology purchases etc Life assurance Save as you earn scheme Staff sales discount Free AG Barr products throughout your working day Pension Annual salary review Ongoing professional development And much more! To find out more about what it is like to work for AG Barr, please visit our careers platform here. We are an equal opportunities employer and happy to discuss any reasonable adjustments that may be needed for successful candidates with a disability, health or mental health condition. While we have highlighted our ideal requirements for this role, we are realistic that the successful candidate probably won't meet every single requirement in this advert, but we are big advocates of people growing in role. So even if you don't meet every single requirement, we encourage you to submit an application - you may be just what we are looking for! Apply now! Speculative CVs from agencies will not be accepted. INDENGINEER
Senior Project Engineer (Inside IR35) Contract Term: 12 Months Contracting Authority: NRS (formerly known as Magnox) Location: Dungeness 4 day working week on site PSR is working with NRS (formerly known as Magnox) to identify the most talented people on the market. NRS is an exciting place to be, and this role is the perfect opportunity for you to be part of our challenging mission, where we are responsible for the delivery of value for money decommissioning and restoration of nuclear sites, ensuring all our futures are safe, secure and sustainable. To deliver our commitment, we need people like you who want to perform at an industry leading standard and be part of a team that continues to develop, innovate, and even exceed our greatest achievements. At NRS, we understand, and acknowledge the value of an inclusive working environment, and celebrate the diversity this brings to our workplace. Without this approach, we wouldn't be in the position that we are now, being able to safeguard and secure the future of our organisation. As a Senior Project Engineer, your main responsibilities will be: Identify project functional requirements and stakeholder needs for assigned project. Contribute to production of Project Execution Plan including design, safety case and commissioning strategies. Support project optioneering process. Develop concept design and fit for purpose engineering solution for projects Produce and/or approve project technical specifications. Manage detailed design activities in accordance with design authority standards. Prepare modification proposals as required, acting as a Nominated Responsible Engineer where appointed. Carry out technical assessment/approval of contractors work instructions/method statements/risk assessments. Provide technical supervision of construction/deconstruction activities to ensure compliance with design intent. Approve as built drawings. Specify and provide technical supervision of commissioning and/or decommissioning. You ll have: Appropriate HNC, degree or National Qualifications Framework (NQF) level 5/6 Experience in a practicing disciplined Engineering role (Mechanical, Electrical, C & I or Civil) on industrial plant Experience of nuclear and/or conventional project engineering Understanding of relevant Company and/or national engineering standards Good knowledge of CDM regulations Experience managing multidisciplinary teams Ideally, experience in the role of a commissioning lead or similar If this role sounds like something that you would be interested in, please click the link to apply or get in touch with Disability confident As a member of the disability confident scheme, NRS guarantees to interview all candidates who have a disability and who meet all the essential criteria for the vacancy. In cases where we have a high volume of candidates who have a disability who meet all the essential criteria, we will interview the best candidates from within that group. NRS is proud to support the Armed Forces Covenant and as such, we guarantee to interview all veterans or spouses / partners of military personnel who meet all the essential criteria for the vacancy. In cases where we have a high volume of ex-military candidates / military spouses or partners, who meet all the essential criteria, we will interview the best candidates from within that group. If you qualify for the above, please notify us on . We will be in touch to discuss your suitability and arrange your Guaranteed Interview. Should you require reasonable adjustments at any point during the recruitment process or if there is a more accessible way for us to communicate, please do let me know. In applying for this role, you acknowledge the following, this role falls in scope of the Off Payroll Working in the Public Sector legislation. Any rates of payment quoted will reflect the gross rate per day for the assignment and will be subject to appropriate taxes and statutory costs. As such the payment to the intermediary and your income resulting from this contract will be different. Please be aware that this role can only be worked within the UK and not Overseas.
Apr 29, 2024
Contractor
Senior Project Engineer (Inside IR35) Contract Term: 12 Months Contracting Authority: NRS (formerly known as Magnox) Location: Dungeness 4 day working week on site PSR is working with NRS (formerly known as Magnox) to identify the most talented people on the market. NRS is an exciting place to be, and this role is the perfect opportunity for you to be part of our challenging mission, where we are responsible for the delivery of value for money decommissioning and restoration of nuclear sites, ensuring all our futures are safe, secure and sustainable. To deliver our commitment, we need people like you who want to perform at an industry leading standard and be part of a team that continues to develop, innovate, and even exceed our greatest achievements. At NRS, we understand, and acknowledge the value of an inclusive working environment, and celebrate the diversity this brings to our workplace. Without this approach, we wouldn't be in the position that we are now, being able to safeguard and secure the future of our organisation. As a Senior Project Engineer, your main responsibilities will be: Identify project functional requirements and stakeholder needs for assigned project. Contribute to production of Project Execution Plan including design, safety case and commissioning strategies. Support project optioneering process. Develop concept design and fit for purpose engineering solution for projects Produce and/or approve project technical specifications. Manage detailed design activities in accordance with design authority standards. Prepare modification proposals as required, acting as a Nominated Responsible Engineer where appointed. Carry out technical assessment/approval of contractors work instructions/method statements/risk assessments. Provide technical supervision of construction/deconstruction activities to ensure compliance with design intent. Approve as built drawings. Specify and provide technical supervision of commissioning and/or decommissioning. You ll have: Appropriate HNC, degree or National Qualifications Framework (NQF) level 5/6 Experience in a practicing disciplined Engineering role (Mechanical, Electrical, C & I or Civil) on industrial plant Experience of nuclear and/or conventional project engineering Understanding of relevant Company and/or national engineering standards Good knowledge of CDM regulations Experience managing multidisciplinary teams Ideally, experience in the role of a commissioning lead or similar If this role sounds like something that you would be interested in, please click the link to apply or get in touch with Disability confident As a member of the disability confident scheme, NRS guarantees to interview all candidates who have a disability and who meet all the essential criteria for the vacancy. In cases where we have a high volume of candidates who have a disability who meet all the essential criteria, we will interview the best candidates from within that group. NRS is proud to support the Armed Forces Covenant and as such, we guarantee to interview all veterans or spouses / partners of military personnel who meet all the essential criteria for the vacancy. In cases where we have a high volume of ex-military candidates / military spouses or partners, who meet all the essential criteria, we will interview the best candidates from within that group. If you qualify for the above, please notify us on . We will be in touch to discuss your suitability and arrange your Guaranteed Interview. Should you require reasonable adjustments at any point during the recruitment process or if there is a more accessible way for us to communicate, please do let me know. In applying for this role, you acknowledge the following, this role falls in scope of the Off Payroll Working in the Public Sector legislation. Any rates of payment quoted will reflect the gross rate per day for the assignment and will be subject to appropriate taxes and statutory costs. As such the payment to the intermediary and your income resulting from this contract will be different. Please be aware that this role can only be worked within the UK and not Overseas.
Overview: Our client is creating high performance precision machines able to print and label at high speed onto consumer goods. The Senior Software Engineer will be joining a global leader in product identification, that provides innovative coding and marking solutions that helps customers ensure product safety and improve their productivity. The successful Senior Software Engineer will be able to interpret customer specifications and provide technical solutions to engineering problems. Key responsibilities for the Senior Software Engineer: Analyse customer specifications and offer technical resolutions to engineering challenges. The Senior Software Engineer will devise designs and technical strategies for emerging technologies within the R&D Technology division. Develop, deploy, and sustain C++ software for both new and existing products. The Senior Software Engineer will work closely with electronic, mechanical, and fellow software engineers, overseeing technical reviews, conducting feasibility studies, and participating in project evaluations as needed. Key skills for the Senior Software Engineer: Proficiency in C++, particularly for Microprocessor (Embedded) applications. Substantial experience in software development for Windows, WinCE, or Real Time operating systems (RTOS). Understanding of Real Time and concurrent principles, with an awareness of networked devices, distributed processes, and packet-based protocols. Preferably, experience in electronics control and interfacing with motors, sensors, etc. Familiarity with Linux operating systems is advantageous.
Apr 29, 2024
Full time
Overview: Our client is creating high performance precision machines able to print and label at high speed onto consumer goods. The Senior Software Engineer will be joining a global leader in product identification, that provides innovative coding and marking solutions that helps customers ensure product safety and improve their productivity. The successful Senior Software Engineer will be able to interpret customer specifications and provide technical solutions to engineering problems. Key responsibilities for the Senior Software Engineer: Analyse customer specifications and offer technical resolutions to engineering challenges. The Senior Software Engineer will devise designs and technical strategies for emerging technologies within the R&D Technology division. Develop, deploy, and sustain C++ software for both new and existing products. The Senior Software Engineer will work closely with electronic, mechanical, and fellow software engineers, overseeing technical reviews, conducting feasibility studies, and participating in project evaluations as needed. Key skills for the Senior Software Engineer: Proficiency in C++, particularly for Microprocessor (Embedded) applications. Substantial experience in software development for Windows, WinCE, or Real Time operating systems (RTOS). Understanding of Real Time and concurrent principles, with an awareness of networked devices, distributed processes, and packet-based protocols. Preferably, experience in electronics control and interfacing with motors, sensors, etc. Familiarity with Linux operating systems is advantageous.
CRA is one of the UK's largest integrated Risk, Safety and Human Factors consultancies. We have a long history of helping our clients in the UK nuclear and other high hazard industries manage risk and ensure the safety of their operations. As part of the Assystem Group we also have opportunities to support a wide variety of projects around the world. Job Description CRA are looking for experienced safety case engineers to join our growing team so if you are a safety professional looking for a new challenge then we would like to hear from you. There are opportunities in our offices in Glasgow, Warrington and London but are able to offer home based working for those based elsewhere. We are looking for self-motivated, passionate safety professionals to grow our existing safety case capability. We have a specific need for candidates with the following specific skills and experience but still want to hear from you if this is not your area of expertise: Waste and Decommissioning Licensing and Regulation Pressurised Water Reactors Internal and External Hazards assessment At CRA we recognise the benefits diversity brings to our organisation and pride ourselves on providing equal opportunities for all. Flexibility has always been at the core of our business, and even more so post pandemic. Providing our people with the right work life balance brings significant benefits to both individuals and the organisation and we are happy to accommodate a range of different working arrangements, whether it be hybrid-working, part-time working, condensed hours, or home-based contracts. Our staff are our greatest asset and we strive to help each of our consultants to continue to develop technically and professionally by providing them with the opportunities and support they need to grow and realise their potential. We are committed to the Continuous Professional Development of our people through a combination internal and external training, targeted work experience, and mentoring. We encourage our seniors to share our passion for developing the next generation of engineers by taking an active role in mentoring and supporting our juniors, as well as supporting external programmes, such as involvement in initiatives led by institutions or other relevant bodies, sponsoring undergraduate projects, supporting STEM activities in schools, or our own CRA Annual Risk and Safety Forum. However, we also recognise that learning and development never stops and provide all our staff a generous annual training allowance, regardless of seniority. The specifics of the role will vary dependent on your skills and experience but as a senior safety case engineer you can expect to be leading projects for a range of clients across the UK nuclear industry including new build projects, supporting operating facilities, as well decommissioning and waste management. You will also have the opportunity to take an active role in business development, building and maintaining relationships with clients and supporting bids for large and small projects and frameworks. My profile As a senior safety case engineer you will have: A Degree (or relevant work experience) in any of the following disciplines - Mechanical Engineering, Electrical Engineering, Chemical Engineering, Nuclear Engineering, Physics or Mathematics etc. Significant experience (typically 7+ years) in the production of safety assessments for nuclear facilities. A detailed understanding of UK regulatory requirements and international standards and guidance particularly relating to Nuclear Safety Assessment. We offer a competitive benefits package including: Generous annual training allowance and tailored development pathway Fully flexible working arrangements to suit individuals 25 days' holiday entitlement plus an additional day of paid holiday on your birthday if this falls on a weekday Company bonus scheme Ability to sell or purchase leave Company pension scheme Life assurance Private medical insurance, including option to extend to other family members Paid membership of two professional institutions / organisations Cycle to work scheme Longevity bonus Additional Information: We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people's ability to dare are the only things that matter! Bring your unique contributions and help us shape the future. Hybrid remote/in-office ASSYSTEMIND4 We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people's ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.
Apr 29, 2024
Full time
CRA is one of the UK's largest integrated Risk, Safety and Human Factors consultancies. We have a long history of helping our clients in the UK nuclear and other high hazard industries manage risk and ensure the safety of their operations. As part of the Assystem Group we also have opportunities to support a wide variety of projects around the world. Job Description CRA are looking for experienced safety case engineers to join our growing team so if you are a safety professional looking for a new challenge then we would like to hear from you. There are opportunities in our offices in Glasgow, Warrington and London but are able to offer home based working for those based elsewhere. We are looking for self-motivated, passionate safety professionals to grow our existing safety case capability. We have a specific need for candidates with the following specific skills and experience but still want to hear from you if this is not your area of expertise: Waste and Decommissioning Licensing and Regulation Pressurised Water Reactors Internal and External Hazards assessment At CRA we recognise the benefits diversity brings to our organisation and pride ourselves on providing equal opportunities for all. Flexibility has always been at the core of our business, and even more so post pandemic. Providing our people with the right work life balance brings significant benefits to both individuals and the organisation and we are happy to accommodate a range of different working arrangements, whether it be hybrid-working, part-time working, condensed hours, or home-based contracts. Our staff are our greatest asset and we strive to help each of our consultants to continue to develop technically and professionally by providing them with the opportunities and support they need to grow and realise their potential. We are committed to the Continuous Professional Development of our people through a combination internal and external training, targeted work experience, and mentoring. We encourage our seniors to share our passion for developing the next generation of engineers by taking an active role in mentoring and supporting our juniors, as well as supporting external programmes, such as involvement in initiatives led by institutions or other relevant bodies, sponsoring undergraduate projects, supporting STEM activities in schools, or our own CRA Annual Risk and Safety Forum. However, we also recognise that learning and development never stops and provide all our staff a generous annual training allowance, regardless of seniority. The specifics of the role will vary dependent on your skills and experience but as a senior safety case engineer you can expect to be leading projects for a range of clients across the UK nuclear industry including new build projects, supporting operating facilities, as well decommissioning and waste management. You will also have the opportunity to take an active role in business development, building and maintaining relationships with clients and supporting bids for large and small projects and frameworks. My profile As a senior safety case engineer you will have: A Degree (or relevant work experience) in any of the following disciplines - Mechanical Engineering, Electrical Engineering, Chemical Engineering, Nuclear Engineering, Physics or Mathematics etc. Significant experience (typically 7+ years) in the production of safety assessments for nuclear facilities. A detailed understanding of UK regulatory requirements and international standards and guidance particularly relating to Nuclear Safety Assessment. We offer a competitive benefits package including: Generous annual training allowance and tailored development pathway Fully flexible working arrangements to suit individuals 25 days' holiday entitlement plus an additional day of paid holiday on your birthday if this falls on a weekday Company bonus scheme Ability to sell or purchase leave Company pension scheme Life assurance Private medical insurance, including option to extend to other family members Paid membership of two professional institutions / organisations Cycle to work scheme Longevity bonus Additional Information: We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people's ability to dare are the only things that matter! Bring your unique contributions and help us shape the future. Hybrid remote/in-office ASSYSTEMIND4 We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people's ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.
Deerns UK is an independent mechanical and electrical engineering consultancy firm with a global presence, specialising in data centre projects across the UK, Mainland Europe, India, and the Middle East. We are dedicated to delivering high-quality, innovative solutions for our clients in the data centre industry, including collocation providers and Hyperscale data centres. Our team comprises talented individuals who are passionate about pushing the boundaries of MEP design in data centre projects. We are looking for an experienced Electrical Engineer (levels Engineer, Senior to Principal)with expertise in Power Distribution, Power Systems design, and LV, MV and ELV systems to join our dynamic team in London. The ideal candidate will have a minimum bachelor's degree in electrical engineering or equivalent, with a strong background in data centre projects design. This is a full-time hybrid role located in our London office (3 days working from our office, 2 days from home or 50% of the time in the office). Role responsibilities include: Lead and contribute to the design and development of electrical systems for data centre projects, including LV, MV, and ELV systems design, UPS, generator designs, lighting design, small power design, fire alarm design, and security systems design. Collaborate with interdisciplinary teams through all stages of the design process, from RIBA concept stage design to Stage 5 client monitoring role. Utilise technical expertise and software proficiency in Amtech, ETAP, EasyPower, AutoCAD, or Revit to produce accurate and innovative design solutions. Work independently and remotely, demonstrating excellent communication skills and the ability to effectively liaise with team members, clients, and stakeholders. Provide consultancy and site support as required, ensuring the successful implementation of electrical designs in accordance with project requirements and industry standards. Stay updated on industry trends, best practices, and emerging technologies to continuously improve design processes and deliverables. Bachelor's degree in electrical engineering or equivalent; degree/diploma in Engineering or similar preferred. Extensive experience in data centre projects design, with a focus on MEP systems. Proficiency in RIBA concept stage design to 4c (or 4iii) and Stage 5 client monitoring role. Familiarity with software tools such as Amtech, ETAP, EasyPower, AutoCAD, or Revit. Previous consultancy/site experience in a similar role is highly desirable. Excellent technical knowledge and understanding of electrical engineering principles. Strong communication skills, both verbal and written, with the ability to work effectively in a team environment. Proven ability to work independently, prioritise tasks, and meet project deadlines. What do we offer? Competitive salary Hybrid work (3 days from our London office + 2 days from home or 50% of the time) 25 days annual leave + UK bank holidays (option to purchase 5 extra days) Referral scheme Life Insurance and long-term sickness coverage Performance related bonus Pension (6% employer contribution) Company social events Cycle to Work scheme Perkbox (a wide range of deals and discounts including health and fitness, entertainment, tech, and electronics) Collaborative and supportive work environment Exposure to diverse and challenging projects International networking opportunities within the Deerns Groep BV This is an exciting opportunity to join a dynamic team and work on prestigious data centre projects globally. The successful candidate will have the chance to contribute to innovative design solutions and collaborate with key players in the data centre industry. We offer competitive compensation packages and opportunities for professional development and growth. Even if you do not meet all the criteria listed above, we encourage you to apply. At Deerns, we are currently expanding, offering additional opportunities within our team. We value diversity and are constantly seeking talented individuals who can enhance our success. Your unique skills and experiences could be exactly what we need to drive our projects forward and accomplish our business objectives. Come and join us on our exciting journey! Please don't hesitate to apply or contact our team to chat about this opportunity in more detail.
Apr 29, 2024
Full time
Deerns UK is an independent mechanical and electrical engineering consultancy firm with a global presence, specialising in data centre projects across the UK, Mainland Europe, India, and the Middle East. We are dedicated to delivering high-quality, innovative solutions for our clients in the data centre industry, including collocation providers and Hyperscale data centres. Our team comprises talented individuals who are passionate about pushing the boundaries of MEP design in data centre projects. We are looking for an experienced Electrical Engineer (levels Engineer, Senior to Principal)with expertise in Power Distribution, Power Systems design, and LV, MV and ELV systems to join our dynamic team in London. The ideal candidate will have a minimum bachelor's degree in electrical engineering or equivalent, with a strong background in data centre projects design. This is a full-time hybrid role located in our London office (3 days working from our office, 2 days from home or 50% of the time in the office). Role responsibilities include: Lead and contribute to the design and development of electrical systems for data centre projects, including LV, MV, and ELV systems design, UPS, generator designs, lighting design, small power design, fire alarm design, and security systems design. Collaborate with interdisciplinary teams through all stages of the design process, from RIBA concept stage design to Stage 5 client monitoring role. Utilise technical expertise and software proficiency in Amtech, ETAP, EasyPower, AutoCAD, or Revit to produce accurate and innovative design solutions. Work independently and remotely, demonstrating excellent communication skills and the ability to effectively liaise with team members, clients, and stakeholders. Provide consultancy and site support as required, ensuring the successful implementation of electrical designs in accordance with project requirements and industry standards. Stay updated on industry trends, best practices, and emerging technologies to continuously improve design processes and deliverables. Bachelor's degree in electrical engineering or equivalent; degree/diploma in Engineering or similar preferred. Extensive experience in data centre projects design, with a focus on MEP systems. Proficiency in RIBA concept stage design to 4c (or 4iii) and Stage 5 client monitoring role. Familiarity with software tools such as Amtech, ETAP, EasyPower, AutoCAD, or Revit. Previous consultancy/site experience in a similar role is highly desirable. Excellent technical knowledge and understanding of electrical engineering principles. Strong communication skills, both verbal and written, with the ability to work effectively in a team environment. Proven ability to work independently, prioritise tasks, and meet project deadlines. What do we offer? Competitive salary Hybrid work (3 days from our London office + 2 days from home or 50% of the time) 25 days annual leave + UK bank holidays (option to purchase 5 extra days) Referral scheme Life Insurance and long-term sickness coverage Performance related bonus Pension (6% employer contribution) Company social events Cycle to Work scheme Perkbox (a wide range of deals and discounts including health and fitness, entertainment, tech, and electronics) Collaborative and supportive work environment Exposure to diverse and challenging projects International networking opportunities within the Deerns Groep BV This is an exciting opportunity to join a dynamic team and work on prestigious data centre projects globally. The successful candidate will have the chance to contribute to innovative design solutions and collaborate with key players in the data centre industry. We offer competitive compensation packages and opportunities for professional development and growth. Even if you do not meet all the criteria listed above, we encourage you to apply. At Deerns, we are currently expanding, offering additional opportunities within our team. We value diversity and are constantly seeking talented individuals who can enhance our success. Your unique skills and experiences could be exactly what we need to drive our projects forward and accomplish our business objectives. Come and join us on our exciting journey! Please don't hesitate to apply or contact our team to chat about this opportunity in more detail.
Senior HVAC Design Engineer Office - Bromsgrove Salary - 50 - 70k a year (Experience dependent) Job Description - Senior Design Engineer Main Purpose To design and estimate projects in a manner that allows ATS to meet the company objective of being the UK's leading niche market HVAC provider while retaining the spiritual trinity of business intent, customer connection and employee experience Key Result Areas (Tasks / Main Duties) Complete and be able to review all necessary design calculations as relevant for M or E role: Heat Losses Heat Gains Airflow Calculations Pipe Sizing Duct Sizing Pressure Drops AC Design Cable Sizing Gas Design Drainage & Public Health Design LEV Design Electrical Design Plant Sizing & Sign Off AHU/ Fan Selection Odour Control Selection Being responsible for completing, overseeing and checking designs and estimates throughout your team and where appropriate the business Dealing with enquires and understanding project specifications and requirements Issue technical queries to clients where clarification is required Understand and define the project scope either specifically in a Mechanical / Electrical / M&E capacity Reviewing, understanding and defining the scope of works for mechanical, electrical, instrumentation and controls Prepare equipment schedules for estimating/ final design and check those generated by others Issue enquires / obtain prices for component items Managing the estimate of a project, ensure all items are included to the correct client scope in accordance with the project specific contract. Including ensuring that the opening profit margin is in excess of the agreed minimum business % value Prepare cost estimates and check those generated by others Prepare tenders and check those generated by others Liaise with Sales Managers and assist with initial conceptual design Complete and check design work within the department Assisting colleagues within the organisation with design related queries Complete initial/ final design calculations Complete all P&IDs and check those generated by others Assist the Drawing Office when required Check General Arrangement drawings before internal sign off Assist in the procurement of specialist packages Prepare Technical Submissions and check those generated by others Prepare Controls Philosophy's where required and check those generated by others Understand the H&S requirements of a project to ensure it is costed and designed in accordance with CDM regulations and is practical to install on site Complete & review Design Hazard & Risk Assessments Read and understand project specifications Competent and confident communicator - Liaising with client Site Design / Estimating teams - Liaising with suppliers to obtain prices to meet the requirements of the projects - Liaising and working with ATS project team members to develop the design of projects and prepare for delivery Prepare initial project programme of works and check those generated by others Attend project commencement/ project review meetings when required Attend site as part of the project team for design and project progress meetings and or surveys Prepare Commissioning Plans Check Commissioning Results against designs and assist with report preparation Assist Project team with identifying any design issues identified at commissioning stage Provide toolbox type talks to other members of the design and delivery teams to improve knowledge base internally Contribute to continuous improvement and innovation in your specialist area
Apr 29, 2024
Full time
Senior HVAC Design Engineer Office - Bromsgrove Salary - 50 - 70k a year (Experience dependent) Job Description - Senior Design Engineer Main Purpose To design and estimate projects in a manner that allows ATS to meet the company objective of being the UK's leading niche market HVAC provider while retaining the spiritual trinity of business intent, customer connection and employee experience Key Result Areas (Tasks / Main Duties) Complete and be able to review all necessary design calculations as relevant for M or E role: Heat Losses Heat Gains Airflow Calculations Pipe Sizing Duct Sizing Pressure Drops AC Design Cable Sizing Gas Design Drainage & Public Health Design LEV Design Electrical Design Plant Sizing & Sign Off AHU/ Fan Selection Odour Control Selection Being responsible for completing, overseeing and checking designs and estimates throughout your team and where appropriate the business Dealing with enquires and understanding project specifications and requirements Issue technical queries to clients where clarification is required Understand and define the project scope either specifically in a Mechanical / Electrical / M&E capacity Reviewing, understanding and defining the scope of works for mechanical, electrical, instrumentation and controls Prepare equipment schedules for estimating/ final design and check those generated by others Issue enquires / obtain prices for component items Managing the estimate of a project, ensure all items are included to the correct client scope in accordance with the project specific contract. Including ensuring that the opening profit margin is in excess of the agreed minimum business % value Prepare cost estimates and check those generated by others Prepare tenders and check those generated by others Liaise with Sales Managers and assist with initial conceptual design Complete and check design work within the department Assisting colleagues within the organisation with design related queries Complete initial/ final design calculations Complete all P&IDs and check those generated by others Assist the Drawing Office when required Check General Arrangement drawings before internal sign off Assist in the procurement of specialist packages Prepare Technical Submissions and check those generated by others Prepare Controls Philosophy's where required and check those generated by others Understand the H&S requirements of a project to ensure it is costed and designed in accordance with CDM regulations and is practical to install on site Complete & review Design Hazard & Risk Assessments Read and understand project specifications Competent and confident communicator - Liaising with client Site Design / Estimating teams - Liaising with suppliers to obtain prices to meet the requirements of the projects - Liaising and working with ATS project team members to develop the design of projects and prepare for delivery Prepare initial project programme of works and check those generated by others Attend project commencement/ project review meetings when required Attend site as part of the project team for design and project progress meetings and or surveys Prepare Commissioning Plans Check Commissioning Results against designs and assist with report preparation Assist Project team with identifying any design issues identified at commissioning stage Provide toolbox type talks to other members of the design and delivery teams to improve knowledge base internally Contribute to continuous improvement and innovation in your specialist area
We are currently seeking an Engineering Manager to join the Major Projects team within our Nuclear & Power EMEA business reporting to the Head of Engineering Delivery. The successful candidate will have a strong engineering background and will support with resource planning, recruitment, and capability development plans for our teams to ensure we can deliver our portfolio of work. You will be required to manage technical projects with a team of engineers involved in multi-disciplinary tasks and interfacing with other construction related disciplines. You will lead an exciting portfolio of work and future opportunities to develop and expand that team to deliver on our major project's portfolio. We continually invest in our people, technology and working facilities to ensure that we strengthen and grow our current capabilities as well as develop new capabilities. This allows us to deliver projects using industry leading and innovative techniques, such as utilising our growing technology solutions and digital capabilities and showing that our solutions work virtual demonstration. Equality, diversity & inclusion Atkins Careers UK & Europe () The Role: Candidates should be able to act as Engineering Manager to oversee the creation and delivery of high-quality engineering solutions in accordance with our Sector Management System and deliver this aligned to internal gated processes and procedures. Using your technical experience, you'll be able to identify and manage technical risk throughout the project lifecycle. This includes multi-discipline design and substantiation tasks and projects for new facilities, equipment, machinery and infrastructure, adaption and refurbishment of existing facilities and infrastructure, as well as condition assessment and substantiation of structures, systems, machines, and components. You will be able to manage an engineering delivery team which leverages our capability, technology & products to yield innovative solutions, and capture learning and continual improvements in supporting documentation, such as case studies and capability statements. You will be able to negotiate with internal stakeholders and the supply chain to develop requirements and ensure that projects start with right Engineering mindset. This will include overseeing a team of engineers, managing competency requirements and continuous assessments of the team to ensure continuous improvement. The Individual: You will have a strong background in Engineering, having led engineering tasks and projects integrating multi-disciplinary delivery including mechanical, civil, electrical and control & instrumentation. You should have experience and a level of expertise in highly regulated sectors working with engineering design and substantiation with a good knowledge of UK and International design codes and industry regulations. You should have the ability, want and drive to sell AtkinsRéalis as a successful partner and supplier through our reputation for technical excellence and quality of delivery in engineering disciplines relevant to the market, manage and guide varied bid teams in our market and collaborate with colleagues across the wider business, and be keen to utilise our Global Technology Centre and supply chain to offer competitive advantage and quality. Ability to manage and motivate a team and demonstrate good leadership qualities. Self-motivated and able to work both single-handedly as well as within a larger multi-discipline team. Excellent team player, able to collaborate effectively with market colleagues, other wider-business colleagues, and the management team. Be a passionate supporter of our Global Technology Centre and supply chain to offer competitive advantage and quality. How will you contribute to the team: An Innovator - You will encourage people to experiment, produce new ideas and question others to think differently. You'll create space for people to think about potential new innovative approaches, providing an opportunity for growth. An Improver - You spend time on making the process of bid creation more efficient, optimising your resources, and adjusting things to be lean. Comprehensive understanding of supporting design disciplines such as Nuclear Safety Engineering, Environmental, Human Factors, Sustainability and Net Zero Carbon. Fully integrated with counterparts in other parts of the business and involved in identifying cross-application of skills. Proactive at identifying and implementing improvements and cross-business learning. Why work for Atkins Réalis ? The UK is the first major economy to legislate for a Net Zero target by 2050. To achieve this, our nuclear and clean energy teams are ensuring a mix of secure and sustainable energies that can meet our industry and lifestyle demands today, and in 30 years' time. We help to power our world through exciting new technologies and intelligent cybersecurity systems on projects that vary greatly in size, scope, and scale. So, you'll be creating the right safe and resilient systems across nuclear power, renewables, decarbonisation development, new builds and energy efficiency. Read more about our Vision for Women. Meeting your needs: When you start with us, you'll enjoy "Total Reward," a package that can be tailored to your lifestyle, career and personal needs. From flexible holidays to life assurance, health & wellbeing benefits, and career planning for the senior stage of your career. Making sure you're supported is important to us. So, if you identify as having a disability, tell us ahead of your interview. And let's talk about any adjustments you might need. New name, new era. We are AtkinsRéalis. It will take some time for all our information to update - you can still refer to our fantastic benefits via the link below: YourReward at SNC-Lavalin () . More about us: AtkinsRéalis is a leading global consultancy with over 100 years of design and engineering expertise. With us, you'll be surrounded by the skills, knowledge and support to help you succeed. Together, we can deliver projects which have a positive, sustainable impact on the world. AtkinsRéalis Latest Projects Articles () Additional Information: This role may require security clearance and offers of employment will be dependent on obtaining the relevant level of clearance. If this is necessary, it will be discussed with you at interview. The vetting process is delivered by United Kingdom Security Vetting (UKSV) and may require candidates to provide proof of residency in the UK of 5 years or longer. If applying to this role please do not make reference to (in conversation) or include in your application or CV, details of any current or previously held security clearance. We are committed to promoting a diverse and inclusive community - a place where we can all be ourselves, thrive and develop. To help embed inclusion for all, from day one, we offer a range of family friendly, inclusive employment policies, flexible working arrangements and employee networks to support staff from different backgrounds. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures and ability.
Apr 29, 2024
Full time
We are currently seeking an Engineering Manager to join the Major Projects team within our Nuclear & Power EMEA business reporting to the Head of Engineering Delivery. The successful candidate will have a strong engineering background and will support with resource planning, recruitment, and capability development plans for our teams to ensure we can deliver our portfolio of work. You will be required to manage technical projects with a team of engineers involved in multi-disciplinary tasks and interfacing with other construction related disciplines. You will lead an exciting portfolio of work and future opportunities to develop and expand that team to deliver on our major project's portfolio. We continually invest in our people, technology and working facilities to ensure that we strengthen and grow our current capabilities as well as develop new capabilities. This allows us to deliver projects using industry leading and innovative techniques, such as utilising our growing technology solutions and digital capabilities and showing that our solutions work virtual demonstration. Equality, diversity & inclusion Atkins Careers UK & Europe () The Role: Candidates should be able to act as Engineering Manager to oversee the creation and delivery of high-quality engineering solutions in accordance with our Sector Management System and deliver this aligned to internal gated processes and procedures. Using your technical experience, you'll be able to identify and manage technical risk throughout the project lifecycle. This includes multi-discipline design and substantiation tasks and projects for new facilities, equipment, machinery and infrastructure, adaption and refurbishment of existing facilities and infrastructure, as well as condition assessment and substantiation of structures, systems, machines, and components. You will be able to manage an engineering delivery team which leverages our capability, technology & products to yield innovative solutions, and capture learning and continual improvements in supporting documentation, such as case studies and capability statements. You will be able to negotiate with internal stakeholders and the supply chain to develop requirements and ensure that projects start with right Engineering mindset. This will include overseeing a team of engineers, managing competency requirements and continuous assessments of the team to ensure continuous improvement. The Individual: You will have a strong background in Engineering, having led engineering tasks and projects integrating multi-disciplinary delivery including mechanical, civil, electrical and control & instrumentation. You should have experience and a level of expertise in highly regulated sectors working with engineering design and substantiation with a good knowledge of UK and International design codes and industry regulations. You should have the ability, want and drive to sell AtkinsRéalis as a successful partner and supplier through our reputation for technical excellence and quality of delivery in engineering disciplines relevant to the market, manage and guide varied bid teams in our market and collaborate with colleagues across the wider business, and be keen to utilise our Global Technology Centre and supply chain to offer competitive advantage and quality. Ability to manage and motivate a team and demonstrate good leadership qualities. Self-motivated and able to work both single-handedly as well as within a larger multi-discipline team. Excellent team player, able to collaborate effectively with market colleagues, other wider-business colleagues, and the management team. Be a passionate supporter of our Global Technology Centre and supply chain to offer competitive advantage and quality. How will you contribute to the team: An Innovator - You will encourage people to experiment, produce new ideas and question others to think differently. You'll create space for people to think about potential new innovative approaches, providing an opportunity for growth. An Improver - You spend time on making the process of bid creation more efficient, optimising your resources, and adjusting things to be lean. Comprehensive understanding of supporting design disciplines such as Nuclear Safety Engineering, Environmental, Human Factors, Sustainability and Net Zero Carbon. Fully integrated with counterparts in other parts of the business and involved in identifying cross-application of skills. Proactive at identifying and implementing improvements and cross-business learning. Why work for Atkins Réalis ? The UK is the first major economy to legislate for a Net Zero target by 2050. To achieve this, our nuclear and clean energy teams are ensuring a mix of secure and sustainable energies that can meet our industry and lifestyle demands today, and in 30 years' time. We help to power our world through exciting new technologies and intelligent cybersecurity systems on projects that vary greatly in size, scope, and scale. So, you'll be creating the right safe and resilient systems across nuclear power, renewables, decarbonisation development, new builds and energy efficiency. Read more about our Vision for Women. Meeting your needs: When you start with us, you'll enjoy "Total Reward," a package that can be tailored to your lifestyle, career and personal needs. From flexible holidays to life assurance, health & wellbeing benefits, and career planning for the senior stage of your career. Making sure you're supported is important to us. So, if you identify as having a disability, tell us ahead of your interview. And let's talk about any adjustments you might need. New name, new era. We are AtkinsRéalis. It will take some time for all our information to update - you can still refer to our fantastic benefits via the link below: YourReward at SNC-Lavalin () . More about us: AtkinsRéalis is a leading global consultancy with over 100 years of design and engineering expertise. With us, you'll be surrounded by the skills, knowledge and support to help you succeed. Together, we can deliver projects which have a positive, sustainable impact on the world. AtkinsRéalis Latest Projects Articles () Additional Information: This role may require security clearance and offers of employment will be dependent on obtaining the relevant level of clearance. If this is necessary, it will be discussed with you at interview. The vetting process is delivered by United Kingdom Security Vetting (UKSV) and may require candidates to provide proof of residency in the UK of 5 years or longer. If applying to this role please do not make reference to (in conversation) or include in your application or CV, details of any current or previously held security clearance. We are committed to promoting a diverse and inclusive community - a place where we can all be ourselves, thrive and develop. To help embed inclusion for all, from day one, we offer a range of family friendly, inclusive employment policies, flexible working arrangements and employee networks to support staff from different backgrounds. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures and ability.
A specialist independent building services consultancy has, due to planned expansion, an immediate requirement for a high-end intermediate / senior level building services design engineer to join their design team in their Birmingham offices. hybrid remote working available. They work in a wide variety of project sectors including, general commercial, high-end residential, educational, health and MOD. As a mechanical design engineer you would be expected to provide effective designs, conduct surveys, prepare feasibility reports, specifications, provide site supervision and management of mechanical services installations. Your should ideally be qualified to a minimum of HND level and have a minimum of 2 years' UK building services design experience. Your should have a demonstrable UK building services background. Your responsibilities would include: Design calculations using industry leading software Assisting in preparing reports such as feasibility studies, design reports, specifications and contract administration. Maintaining an up to date knowledge of current standards and legislation. Attending site surveys and client meetings. Implementing technical standards and supporting the business development. Compliance with CDM Regulations must be ensured. Undertaking detailed site surveys and design reviews. Understanding of engineering systems and the ability to report on both mechanical and electrical disciplines during meetings is essential. You would need an appreciation of contract administration, project management and site supervision/inspections and assist with the financial control of project(s) liaising with Project Director. Mentoring and assisting the graduate engineers. Skills and Experience Prefarbly have some Revit MEP experience. Some experience of IES modelling software would be advantageous (but not essential). Ideally some understanding of BIM Level 2 and BIM project deliverables structure. Training will be provided if required Undertaking mechanical designs from inception to completion, sometimes within tight deadlines whilst maintaining accuracy and quality. CEng qualified or working towards CEng. Appropriate membership of professional body, i.e. CIBSE, IMECHE, IET Full UK driving license
Apr 29, 2024
Full time
A specialist independent building services consultancy has, due to planned expansion, an immediate requirement for a high-end intermediate / senior level building services design engineer to join their design team in their Birmingham offices. hybrid remote working available. They work in a wide variety of project sectors including, general commercial, high-end residential, educational, health and MOD. As a mechanical design engineer you would be expected to provide effective designs, conduct surveys, prepare feasibility reports, specifications, provide site supervision and management of mechanical services installations. Your should ideally be qualified to a minimum of HND level and have a minimum of 2 years' UK building services design experience. Your should have a demonstrable UK building services background. Your responsibilities would include: Design calculations using industry leading software Assisting in preparing reports such as feasibility studies, design reports, specifications and contract administration. Maintaining an up to date knowledge of current standards and legislation. Attending site surveys and client meetings. Implementing technical standards and supporting the business development. Compliance with CDM Regulations must be ensured. Undertaking detailed site surveys and design reviews. Understanding of engineering systems and the ability to report on both mechanical and electrical disciplines during meetings is essential. You would need an appreciation of contract administration, project management and site supervision/inspections and assist with the financial control of project(s) liaising with Project Director. Mentoring and assisting the graduate engineers. Skills and Experience Prefarbly have some Revit MEP experience. Some experience of IES modelling software would be advantageous (but not essential). Ideally some understanding of BIM Level 2 and BIM project deliverables structure. Training will be provided if required Undertaking mechanical designs from inception to completion, sometimes within tight deadlines whilst maintaining accuracy and quality. CEng qualified or working towards CEng. Appropriate membership of professional body, i.e. CIBSE, IMECHE, IET Full UK driving license
Job description: Mechanical Maintenance Engineer The Company Southampton based manufacturer of flexible packaging. A privately owned family run company with a 40+ year trading history in the UK. Continued year on year growth, despite current economic climate. Regarded throughout our industry as a top tier manufacturer, supplying many household names both in the UK and across the globe. Mechanical Maintenance Engineer An experienced Mechanical Maintenance Engineer is required to perform maintenance, repair, de-commissioning and re-commissioning of systems and equipment within the scope of their specific disciplines, with the minimum of supervision. The main responsibilities include: Ensuring plant/equipment is maintained in accordance with the Planned Preventative Maintenance System. The incumbent must be flexible enough to undertake duties to accommodate operational requirements. Conduct appointed tasks ensuring compliance with Company Safety Policy, Procedures, relevant Codes of Practice and Statutory Regulations. Ensuring compliance to the Company's Work Systems. Repair defective equipment effectively or recommend remedial action as appropriate. Liaise with Senior Management and Directors. Able to read and interpret technical documentation. To understand and complete all work-related documentation accurately and on time. Advise on minor additional works. Carry out mechanical maintenance work as dictated by Senior Management and Directors. Determine and specify appropriate production and/or installation methods and quality and safety standards. Organise and establish control systems to monitor performance and evaluate designs. Test / diagnose faults and undertake repair of equipment. The candidate: Ideally will have experience in a similar role, preferably within a FMCG / highly controlled environment. Educated to a minimum of City and Guilds (or equivalent) but should preferably have an NVQ, HNC (or equivalent). Should have served time as an apprenticeship or followed a recognised formal training programme and completed at least additional experience in a related industry environment. Must be self-motivated and capable of working with minimum supervision. Must have proven record of good timekeeping and attendance record, be able to work as a team and interact with other members of staff. Able to follow instructions and complete documentation if required. Practical problem solver and quick learner and a reasonable standard of education. Positive and enthusiastic approach. Be able to work as part of a team. Able to carry out manual work. Including some heavy lifting. Must be willing to work shifts (4 on / 4 off) including nights. Other: This role will offer excellent opportunities for career development and will provide an ideal chance for you to showcase your experience. The role is permanent and will be shift based. Flexible salary depending on experience. Benefits: - £50 weekly shift attendance bonus (conditions apply). - £500 sign on bonus after successful completion of probation period. - Employee referral scheme per referred employee up to £500 (T&Cs apply). - 1 extra days holiday for each completed year of service up to 5 maximum days. - Health Cash Plan including dental, optical, health screening, prescription, medical and well-being (T&Cs apply). - Gym membership discounts. - 8 hours extra pay on your birthday. - Free in-house meal voucher on your birthday. - Free uniform & free laundry. - NEST Contributory pension. Job Type: Full-time Salary: £12.62 - £19.50 per hour Experience: Mechancial Engineering: 1 year (Required)
Apr 29, 2024
Full time
Job description: Mechanical Maintenance Engineer The Company Southampton based manufacturer of flexible packaging. A privately owned family run company with a 40+ year trading history in the UK. Continued year on year growth, despite current economic climate. Regarded throughout our industry as a top tier manufacturer, supplying many household names both in the UK and across the globe. Mechanical Maintenance Engineer An experienced Mechanical Maintenance Engineer is required to perform maintenance, repair, de-commissioning and re-commissioning of systems and equipment within the scope of their specific disciplines, with the minimum of supervision. The main responsibilities include: Ensuring plant/equipment is maintained in accordance with the Planned Preventative Maintenance System. The incumbent must be flexible enough to undertake duties to accommodate operational requirements. Conduct appointed tasks ensuring compliance with Company Safety Policy, Procedures, relevant Codes of Practice and Statutory Regulations. Ensuring compliance to the Company's Work Systems. Repair defective equipment effectively or recommend remedial action as appropriate. Liaise with Senior Management and Directors. Able to read and interpret technical documentation. To understand and complete all work-related documentation accurately and on time. Advise on minor additional works. Carry out mechanical maintenance work as dictated by Senior Management and Directors. Determine and specify appropriate production and/or installation methods and quality and safety standards. Organise and establish control systems to monitor performance and evaluate designs. Test / diagnose faults and undertake repair of equipment. The candidate: Ideally will have experience in a similar role, preferably within a FMCG / highly controlled environment. Educated to a minimum of City and Guilds (or equivalent) but should preferably have an NVQ, HNC (or equivalent). Should have served time as an apprenticeship or followed a recognised formal training programme and completed at least additional experience in a related industry environment. Must be self-motivated and capable of working with minimum supervision. Must have proven record of good timekeeping and attendance record, be able to work as a team and interact with other members of staff. Able to follow instructions and complete documentation if required. Practical problem solver and quick learner and a reasonable standard of education. Positive and enthusiastic approach. Be able to work as part of a team. Able to carry out manual work. Including some heavy lifting. Must be willing to work shifts (4 on / 4 off) including nights. Other: This role will offer excellent opportunities for career development and will provide an ideal chance for you to showcase your experience. The role is permanent and will be shift based. Flexible salary depending on experience. Benefits: - £50 weekly shift attendance bonus (conditions apply). - £500 sign on bonus after successful completion of probation period. - Employee referral scheme per referred employee up to £500 (T&Cs apply). - 1 extra days holiday for each completed year of service up to 5 maximum days. - Health Cash Plan including dental, optical, health screening, prescription, medical and well-being (T&Cs apply). - Gym membership discounts. - 8 hours extra pay on your birthday. - Free in-house meal voucher on your birthday. - Free uniform & free laundry. - NEST Contributory pension. Job Type: Full-time Salary: £12.62 - £19.50 per hour Experience: Mechancial Engineering: 1 year (Required)
Senior Systems Engineer - DOORS - Naval/Maritime - Radar OUTSIDE IR35 AVAILABLE Job Functions Activities will include all aspects of the Systems Engineering life cycle from System Concept through to Delivery and Acceptance, including Bid Support, System Design, Integration, Verification and Customer Acceptance. You will be responsible for the specification, development, integration, verification and acceptance of systems for both Internal and External Customers. You will have the ability to deal with a variety of people from different disciplines, organisations and nationalities on a daily basis to deliver the systems engineering aspects of projects, as required. You will take an active role in the definition, realisation and proving of new products which build upon reputation for innovation and leading edge technology. You will manage stakeholders throughout the system life cycle through a pro-active approach and effective communication. You will create a variety of technical documentation for both technical and non-technical readership. Travel within the UK and overseas is required and is considered a regular feature of this role. Requests could be made at short notice. Any other task associated with this role Requirements Essential Experience of systems design, integration & test. An understanding of Systems and Product life cycles from concept through to delivery. An understanding of a range of Engineering disciplines (Software, Mechanical, and Electrical). Good inter-personal skills with the ability to communicate to all levels within the organisation and externally. The flexibility to apply skills and knowledge across a number of different projects and products across the organisation. Computer literate with a good standard of written English, capable of compiling accurate, detailed and well-presented technical proposals, specifications and reports. A willingness to travel. (NB whilst this role is based at our Enfield premises, a certain amount of business travel will be required depending upon project requirements). Degree (or equivalent) qualified in an engineering or science discipline. Desirable (Not Essential) An understanding of Radar Systems is desirable, although not essential if other complementary skills demonstrate a capacity to understand new technologies quickly and effectively. Experience of the whole product life cycle (concept generation, concept demonstration, development, production and in-service support). Experience of working with and developing systems using communications protocols. (eg, RS485, RS232, TCP/IP, Canbus etc.) Experience of working on product development for Naval Platforms. Experience of working on or with Navigation equipment. The ability to lead multi-skilled engineering teams. The ability to deliver engineering packages of work to time, cost, and quality. Member of a Professional Engineering Institution (eg, IMechE, IET, INCOSE). UK Security clearance. UK Driving License.
Apr 29, 2024
Contractor
Senior Systems Engineer - DOORS - Naval/Maritime - Radar OUTSIDE IR35 AVAILABLE Job Functions Activities will include all aspects of the Systems Engineering life cycle from System Concept through to Delivery and Acceptance, including Bid Support, System Design, Integration, Verification and Customer Acceptance. You will be responsible for the specification, development, integration, verification and acceptance of systems for both Internal and External Customers. You will have the ability to deal with a variety of people from different disciplines, organisations and nationalities on a daily basis to deliver the systems engineering aspects of projects, as required. You will take an active role in the definition, realisation and proving of new products which build upon reputation for innovation and leading edge technology. You will manage stakeholders throughout the system life cycle through a pro-active approach and effective communication. You will create a variety of technical documentation for both technical and non-technical readership. Travel within the UK and overseas is required and is considered a regular feature of this role. Requests could be made at short notice. Any other task associated with this role Requirements Essential Experience of systems design, integration & test. An understanding of Systems and Product life cycles from concept through to delivery. An understanding of a range of Engineering disciplines (Software, Mechanical, and Electrical). Good inter-personal skills with the ability to communicate to all levels within the organisation and externally. The flexibility to apply skills and knowledge across a number of different projects and products across the organisation. Computer literate with a good standard of written English, capable of compiling accurate, detailed and well-presented technical proposals, specifications and reports. A willingness to travel. (NB whilst this role is based at our Enfield premises, a certain amount of business travel will be required depending upon project requirements). Degree (or equivalent) qualified in an engineering or science discipline. Desirable (Not Essential) An understanding of Radar Systems is desirable, although not essential if other complementary skills demonstrate a capacity to understand new technologies quickly and effectively. Experience of the whole product life cycle (concept generation, concept demonstration, development, production and in-service support). Experience of working with and developing systems using communications protocols. (eg, RS485, RS232, TCP/IP, Canbus etc.) Experience of working on product development for Naval Platforms. Experience of working on or with Navigation equipment. The ability to lead multi-skilled engineering teams. The ability to deliver engineering packages of work to time, cost, and quality. Member of a Professional Engineering Institution (eg, IMechE, IET, INCOSE). UK Security clearance. UK Driving License.
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
Apr 29, 2024
Full time
Mechanical Engineer/Aerospace Engineer - Aerospace Testing Equipment, Wind Tunnels, Force Measurement & Positioning Systems; Bespoke Mechanical Engineering, Design, Hands-on Assembly, Installation; FEA, CAE from: Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. Permanent, East Sussex, Onsite. C.£60k + Bonus. Specialist Engineering firm with 30 year trading history and a leading position within the Wind Tunnel/Airflow Testing Solutions marketplace seek Mechanical Engineer to join the business and play a lead role within the team. With the majority of their clients operating within the Aerospace, Motorsport and Defence sectors the company delivers bespoke engineering solutions to clients across the globe. A wide range of wind/air flow testing solutions are offered within their product range with each actual delivery being bespoke in nature. The Mechanical Engineer/Aerospace Engineer will work in a lead capacity and within the full life cycle. This will require the design of the solution using 3D CAE tools such as Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc, liaison with the fabricators and then the subsequent (hands-on) build and assembly of the systems either in the company's factory environment and/or onsite anywhere in the world. You will plan complex engineering projects, design solutions/oversee solutions designed by the team, play a key role in the assembly and installation but also solve problems as they arise and advise on appropriate methods and solutions to improve the end product. This will require both leadership of the team, engagement with senior management, project management capability as well as engagement with customers within some of the worlds' leading organisations within the Aerospace, Automotive, Motorsport and Defence sectors. We are searching for an experienced Mechanical Engineer/Aerospace Engineer who possesses many years' experience in the full life cycle of aeronautical/motion control/electromechanical engineering fields where you will have gained experience in in 2D and 3D CAE with either Solidworks, 3D CAD, CATIA, Unigraphix/UG NX, Inventor etc. You will be a hands-on Engineer with experience of machined components to tight tolerances; large, welded fabrications. You will be comfortable with the concepts of FEA (Finite Element Analysis). Leadership, Project Management, Client Engagement and an overall keen eye for detail will all be expected and in return you will have the opportunity to deliver first class systems for some of the world's leading companies. Excellent communication skills will be required. SC clearance required/to be undertaken on appointment. This is an exceptional opportunity to join a well-established, leading specialist engineering company with exciting global prospects. Due to the hands-on nature of this role we require someone who can work Full Time, onsite at the company's facility in rural East Sussex. You will need to be in possession of a full driving license and car as the offices and assembly centre are not within walking distance of the mainline train station. The location is easily commutable (by car) from areas including Eastbourne, Hailsham, Hastings, Uckfield East Sussex; Tunbridge Wells, Sevenoaks, Kent; East Grinstead, Crawley West Sussex; Horley, Redhill, Surrey.
Senior Control & Instrumentation Engineer "Job Details" London, London, United Kingdom and 1 more Job Identification 5170 Locations Posting Date 04/15/2024, 02:41 PM Apply Before 05/01/2024, 02:41 PM Job Description About Us At Technip Energies, we believe in a better tomorrow and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do. Genesis is a global business unit of Technip Energies,providingimpartial consulting services to its clients in traditional hydrocarbon and the energy industries. We have an unrivalled track record of bringing high-impact solutions to clients. Our mission is to be a trusted advisor on the journey to a sustainable future. We're problem solvers who are at the forefront of innovation and our world-class experience, individual expertise and collective wisdom is what differentiates Genesis in today's market. From Engineers and Specialists to Project Managers and Support Staff, spread across 13 countries, our people thrive in a dynamic, proactive business that's balanced with a deep sense of environmental responsibility. Never standing still, we see limitless possibilities for our solutions; and our knowledge sharing, collaboration and innovative thinking are just a few of the ways we fuel our energy for what we do. If you share our determination to drive the transition to a low-carbon future, then this could be the job for you.We offer you not only a job, but an inspiring journey in a truly global environment where you team up to break down boundaries thanks to the innovation, creativity and pioneer spirit which drive our people. What we are looking for An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. Are you early in your career looking to accelerate and expand your professional development whilst making key contributions to early-phase study delivery for major energy transition and conventional energy development projects? Do you enjoy a fast-paced one-team working environment and developing fresh approaches to new challenges? Are you a critical thinker driven to make high-value contributions to key project decision-making? If so, then we would love to hear from you! The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. In addition to multi-discipline study input, there will be opportunities to develop further skills in C&I-focused studies, including Functional Safety, Alarm Management, and Telecommunications as well as supporting Genesis in further developing an understanding of C&I considerations for our ever-growing Energy Transition studies. The position requires a critical and forward-thinking engineer who is happy to take on new challenges with the support of the discipline lead to develop and challenge control and instrumentation concepts working with the latest technology. In return, the position will provide the opportunity to join a growing successful and dynamic team and will present significant opportunities for professional and personal growth, working in Hydrogen Generation, Carbon Capture, Energy Transition, lower carbon energy delivery as well as traditional oil and gas related work. Genesis globally is managed within core services lines (Early Advisory Solutions, Development Solutions and Asset Lifecycle Solutions) and key markets (Low Carbon & CO2 management, Upstream, Downstream, and Renewables and power to X). The Genesis UK Operating Centre (with offices in Aberdeen and London) is organised into core delivery teams providing advisory services globally across these services and markets. You will join the UK Project and Discipline Engineering delivery team, currently comprising circa 50+; engineers, project engineers and study managers, managed in six core discipline study teams comprising; Project Engineering and Operations / Piping, Mechanical and Construction / Electrical / Control, Instrumentation & Telecommunications / Structural, Civil and Marine / Decommissioning . We are looking for someone who will: Key responsibilities of the role require early career Control and Instrumentation Engineering project lifecycle knowledge and will include: Participating in all C&I discipline activities including preparation and checking of documents, philosophies, specifications, procedures, standards, data sheets etc.; Contribute to front-end multi-discipline engineering studies, providing key control and instrumentation input; Brownfield cost estimation for C&I activities; Carry out varied C&I engineering studies as per client scope of work; Participating in safety studies (HAZOP, LOPA etc.); Ensuring instrument, control and telecom discipline design is performed in compliance with project requirements and satisfies all relevant safety and quality standards; Preparation, in conjunction with other disciplines, control and safeguarding philosophies and specifications. Requirements: We'd love to hear from you if you can demonstrate: Degree Qualified in relevant engineering subject; Previous early career experience working as a Control and Instrumentation Engineer; Excellent communication skills and full command of English language (written & spoken); Good broad computer literacy with competence in MS Office applications; Previous experience working in Concept Engineering (Front End / FEED) is an advantage; Working towards Chartered Engineer status is an advantage; North Sea, Oil and Gas Experience is an advantage; Experience in Energy Transition and/or low-carbon energy delivery is an advantage; Functional Safety Experience is an advantage; Alarm Rationalisation Experience is an advantage; Concept Engineering (Front End / FEED) is an advantage; Current offshore survival and medical certificates are an advantage. It is essential that applicants have the right to work in the United Kingdom. We invite you to learn more about our company by visiting and following us on LinkedIn for company updates. "As an equal opportunity employer Technip Energies considers only qualified applicants without regard to colour, age, race, ethnicity, sexual orientation, gender expression, disability, national origin, veteran or marital status." An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. We are seeking a Senior Process Engineer, who will support a wide range of clients on varied and interesting projects related to the energy industry . You will also interface with the wider Genesis organisation through interactions with other discipline teams and a range of clients in the UK and overseas. You will have the opportunity to work in related engineering disciplines based on your career interests, as you work towards Chartered Engineer status. We are currently seeking a Senior Pipeline Engineer to provide input and expertise in the design of subsea pipeline systems at all phases through the design of a system. This will include the execution and delivery of the design of subsea pipelines, risers and tie-in spools in both traditional oil and gas projects as well as Energy Transition such as CCUS, Hydrogen etc. We are currently seeking a Senior Process Engineer to join the UK Process Department. Genesis Process team is a dynamic group working across a range of assignments from traditional upstream oil and gas developments to emerging energy transition technologies. Our work encompasses feasibility assessments and concept selection for new developments through to technical support of mature assets.At Genesis we work in close collaboration with our clients, develop an understanding of their problems before identifying the possible solutions and supporting their decision making process.
Apr 29, 2024
Full time
Senior Control & Instrumentation Engineer "Job Details" London, London, United Kingdom and 1 more Job Identification 5170 Locations Posting Date 04/15/2024, 02:41 PM Apply Before 05/01/2024, 02:41 PM Job Description About Us At Technip Energies, we believe in a better tomorrow and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do. Genesis is a global business unit of Technip Energies,providingimpartial consulting services to its clients in traditional hydrocarbon and the energy industries. We have an unrivalled track record of bringing high-impact solutions to clients. Our mission is to be a trusted advisor on the journey to a sustainable future. We're problem solvers who are at the forefront of innovation and our world-class experience, individual expertise and collective wisdom is what differentiates Genesis in today's market. From Engineers and Specialists to Project Managers and Support Staff, spread across 13 countries, our people thrive in a dynamic, proactive business that's balanced with a deep sense of environmental responsibility. Never standing still, we see limitless possibilities for our solutions; and our knowledge sharing, collaboration and innovative thinking are just a few of the ways we fuel our energy for what we do. If you share our determination to drive the transition to a low-carbon future, then this could be the job for you.We offer you not only a job, but an inspiring journey in a truly global environment where you team up to break down boundaries thanks to the innovation, creativity and pioneer spirit which drive our people. What we are looking for An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. Are you early in your career looking to accelerate and expand your professional development whilst making key contributions to early-phase study delivery for major energy transition and conventional energy development projects? Do you enjoy a fast-paced one-team working environment and developing fresh approaches to new challenges? Are you a critical thinker driven to make high-value contributions to key project decision-making? If so, then we would love to hear from you! The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. In addition to multi-discipline study input, there will be opportunities to develop further skills in C&I-focused studies, including Functional Safety, Alarm Management, and Telecommunications as well as supporting Genesis in further developing an understanding of C&I considerations for our ever-growing Energy Transition studies. The position requires a critical and forward-thinking engineer who is happy to take on new challenges with the support of the discipline lead to develop and challenge control and instrumentation concepts working with the latest technology. In return, the position will provide the opportunity to join a growing successful and dynamic team and will present significant opportunities for professional and personal growth, working in Hydrogen Generation, Carbon Capture, Energy Transition, lower carbon energy delivery as well as traditional oil and gas related work. Genesis globally is managed within core services lines (Early Advisory Solutions, Development Solutions and Asset Lifecycle Solutions) and key markets (Low Carbon & CO2 management, Upstream, Downstream, and Renewables and power to X). The Genesis UK Operating Centre (with offices in Aberdeen and London) is organised into core delivery teams providing advisory services globally across these services and markets. You will join the UK Project and Discipline Engineering delivery team, currently comprising circa 50+; engineers, project engineers and study managers, managed in six core discipline study teams comprising; Project Engineering and Operations / Piping, Mechanical and Construction / Electrical / Control, Instrumentation & Telecommunications / Structural, Civil and Marine / Decommissioning . We are looking for someone who will: Key responsibilities of the role require early career Control and Instrumentation Engineering project lifecycle knowledge and will include: Participating in all C&I discipline activities including preparation and checking of documents, philosophies, specifications, procedures, standards, data sheets etc.; Contribute to front-end multi-discipline engineering studies, providing key control and instrumentation input; Brownfield cost estimation for C&I activities; Carry out varied C&I engineering studies as per client scope of work; Participating in safety studies (HAZOP, LOPA etc.); Ensuring instrument, control and telecom discipline design is performed in compliance with project requirements and satisfies all relevant safety and quality standards; Preparation, in conjunction with other disciplines, control and safeguarding philosophies and specifications. Requirements: We'd love to hear from you if you can demonstrate: Degree Qualified in relevant engineering subject; Previous early career experience working as a Control and Instrumentation Engineer; Excellent communication skills and full command of English language (written & spoken); Good broad computer literacy with competence in MS Office applications; Previous experience working in Concept Engineering (Front End / FEED) is an advantage; Working towards Chartered Engineer status is an advantage; North Sea, Oil and Gas Experience is an advantage; Experience in Energy Transition and/or low-carbon energy delivery is an advantage; Functional Safety Experience is an advantage; Alarm Rationalisation Experience is an advantage; Concept Engineering (Front End / FEED) is an advantage; Current offshore survival and medical certificates are an advantage. It is essential that applicants have the right to work in the United Kingdom. We invite you to learn more about our company by visiting and following us on LinkedIn for company updates. "As an equal opportunity employer Technip Energies considers only qualified applicants without regard to colour, age, race, ethnicity, sexual orientation, gender expression, disability, national origin, veteran or marital status." An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. We are seeking a Senior Process Engineer, who will support a wide range of clients on varied and interesting projects related to the energy industry . You will also interface with the wider Genesis organisation through interactions with other discipline teams and a range of clients in the UK and overseas. You will have the opportunity to work in related engineering disciplines based on your career interests, as you work towards Chartered Engineer status. We are currently seeking a Senior Pipeline Engineer to provide input and expertise in the design of subsea pipeline systems at all phases through the design of a system. This will include the execution and delivery of the design of subsea pipelines, risers and tie-in spools in both traditional oil and gas projects as well as Energy Transition such as CCUS, Hydrogen etc. We are currently seeking a Senior Process Engineer to join the UK Process Department. Genesis Process team is a dynamic group working across a range of assignments from traditional upstream oil and gas developments to emerging energy transition technologies. Our work encompasses feasibility assessments and concept selection for new developments through to technical support of mature assets.At Genesis we work in close collaboration with our clients, develop an understanding of their problems before identifying the possible solutions and supporting their decision making process.