Network Support Engineer +9-12 months + +Must have own vehicle and full clean driving license, will need to travel between campus sites +On site in Nottingham +Inside IR35 +£250 - £310 a day Skills: +Cisco +Network Support +Firewalls The main objectives of the role are to implement changes that achieve a high level of client satisfaction, delivering on time, within budget and to a high standard. To deliver solutions into the client and 3rd party Data Centres, to meet planned timescales. Duties will also include ensuring that all necessary support documentation is amended to reflect any implementation made and ensure handover and knowledge transfer to onshore and offshore support teams. Change control procedures are to be adhered to at all times. The successful candidate must be able to work on own initiative and under guidance from senior team members. The role requires the candidate to: Must have a valid drivers license. Configure specific hardware and Wireless environments to meet project & small change delivery timescales; this entails installation, patching and configuration by following documented Low Level Designs and best practices. Perform out of hours change work as and when required. Provide documentation and information to hand Servers over into BAU Perform Switch & Access point Install/Patching/Firmware updates inline with best practices. Have basic knowledge of Network switch architecture ranging from CISCO and Broadcom (Brocade). Full training will be provided on all of the above. The candidate must: Have the ability to following detailed implementation plans. Maintain security and documentation standards (ISO90001 AND ISO27001). Have good communication skills, both verbal and written.
May 03, 2024
Contractor
Network Support Engineer +9-12 months + +Must have own vehicle and full clean driving license, will need to travel between campus sites +On site in Nottingham +Inside IR35 +£250 - £310 a day Skills: +Cisco +Network Support +Firewalls The main objectives of the role are to implement changes that achieve a high level of client satisfaction, delivering on time, within budget and to a high standard. To deliver solutions into the client and 3rd party Data Centres, to meet planned timescales. Duties will also include ensuring that all necessary support documentation is amended to reflect any implementation made and ensure handover and knowledge transfer to onshore and offshore support teams. Change control procedures are to be adhered to at all times. The successful candidate must be able to work on own initiative and under guidance from senior team members. The role requires the candidate to: Must have a valid drivers license. Configure specific hardware and Wireless environments to meet project & small change delivery timescales; this entails installation, patching and configuration by following documented Low Level Designs and best practices. Perform out of hours change work as and when required. Provide documentation and information to hand Servers over into BAU Perform Switch & Access point Install/Patching/Firmware updates inline with best practices. Have basic knowledge of Network switch architecture ranging from CISCO and Broadcom (Brocade). Full training will be provided on all of the above. The candidate must: Have the ability to following detailed implementation plans. Maintain security and documentation standards (ISO90001 AND ISO27001). Have good communication skills, both verbal and written.
At the heart of Paxton, we are innovators, we look for ways of harnessing new technology to provide better solutions for our customers. We're a global brand with nearly 40 years of experience, our team of over 400 employees is spread around the world. We pride ourselves on creating a vibrant environment, with a focus on excellent company culture. Our teams make Paxton a great place to work with brilliant benefits that come with any role at Paxton, with an emphasis on career progression, training and development, and recognition of achievement for every employee. So, what are the benefits? We run a great social calendar with wine tasting, cooking classes, onsite yoga, staff parties and more. It's rare you won't see something going on! Hybrid working! Work from home on Tuesday and Thursdays alongside our flexible working hours. Modern offices, collaboration spaces, onsite gym, and a gourmet café with subsidised food. Tech, bike, and travel or season ticket loans. Private medical insurance (Opt in) and healthcare cash-back plan with Health Shield. Discounted fitness memberships up to 75% off in your area with GymFlex. 25-days holiday plus bank holidays, and you can buy & sell up to 5 days a year. Recognised as one of the Best Companies to Work for in the UK, by Best Companies . About the role Join our Firmware Design team based in Brighton, where you'll work with different disciplines across our development team to design and refine firmware for our products. Taking a collaborative approach you'll share your technical insight and build relationships, to deliver world-class firmware solutions. Follow the design and feasibility plan to meet project requirements, leveraging your understanding of product ranges for successful implementation. Collaborate closely with Development teams to share knowledge, propose solutions, and mitigate risks. Deliver clear and timely technical updates to project teams, ensuring transparency and alignment. Support in product discussions and provide technical insight to drive product improvements. Work closely with the team to communicate technical changes and support to team members in their deliverables. Understand and follow the company design processes and procedures (PCP/ECR/ECO/PLM). Offer valuable insight to enhance product quality, through thorough review of requirements, specifications, and design. Design and implement software for embedded devices and systems, from requirements to commercial deployment. Review and analyse code to optimize system efficiency, stability, and scalability, ensuring smooth software delivery. Integrate and validate new product designs, optimizing I/O performance as required. Collaborate with Hardware Design and Development teams to align requirements, maximise performance and functionality. Assess third-party and open-source software solutions to ensure compatibility and suitability for project needs. What are we looking for? Extensive recent experience within Firmware Design role, or similar. Collaborative approach to projects and tasks. The right attitude is more important to us than your skills or experience. If you're excited about a role but your existing experience doesn't match up with every element of the job description, we encourage you to apply anyway. We want to collaborate with you and hear your ideas, most of all, we want people to enjoy the journey with us. Take a look at what our team thinks of working here
May 02, 2024
Full time
At the heart of Paxton, we are innovators, we look for ways of harnessing new technology to provide better solutions for our customers. We're a global brand with nearly 40 years of experience, our team of over 400 employees is spread around the world. We pride ourselves on creating a vibrant environment, with a focus on excellent company culture. Our teams make Paxton a great place to work with brilliant benefits that come with any role at Paxton, with an emphasis on career progression, training and development, and recognition of achievement for every employee. So, what are the benefits? We run a great social calendar with wine tasting, cooking classes, onsite yoga, staff parties and more. It's rare you won't see something going on! Hybrid working! Work from home on Tuesday and Thursdays alongside our flexible working hours. Modern offices, collaboration spaces, onsite gym, and a gourmet café with subsidised food. Tech, bike, and travel or season ticket loans. Private medical insurance (Opt in) and healthcare cash-back plan with Health Shield. Discounted fitness memberships up to 75% off in your area with GymFlex. 25-days holiday plus bank holidays, and you can buy & sell up to 5 days a year. Recognised as one of the Best Companies to Work for in the UK, by Best Companies . About the role Join our Firmware Design team based in Brighton, where you'll work with different disciplines across our development team to design and refine firmware for our products. Taking a collaborative approach you'll share your technical insight and build relationships, to deliver world-class firmware solutions. Follow the design and feasibility plan to meet project requirements, leveraging your understanding of product ranges for successful implementation. Collaborate closely with Development teams to share knowledge, propose solutions, and mitigate risks. Deliver clear and timely technical updates to project teams, ensuring transparency and alignment. Support in product discussions and provide technical insight to drive product improvements. Work closely with the team to communicate technical changes and support to team members in their deliverables. Understand and follow the company design processes and procedures (PCP/ECR/ECO/PLM). Offer valuable insight to enhance product quality, through thorough review of requirements, specifications, and design. Design and implement software for embedded devices and systems, from requirements to commercial deployment. Review and analyse code to optimize system efficiency, stability, and scalability, ensuring smooth software delivery. Integrate and validate new product designs, optimizing I/O performance as required. Collaborate with Hardware Design and Development teams to align requirements, maximise performance and functionality. Assess third-party and open-source software solutions to ensure compatibility and suitability for project needs. What are we looking for? Extensive recent experience within Firmware Design role, or similar. Collaborative approach to projects and tasks. The right attitude is more important to us than your skills or experience. If you're excited about a role but your existing experience doesn't match up with every element of the job description, we encourage you to apply anyway. We want to collaborate with you and hear your ideas, most of all, we want people to enjoy the journey with us. Take a look at what our team thinks of working here
A new and exciting opportunity has arisen for a Electronics Design Engineer to join a market leading instrumentation manufacturing company priding itself on quality. With no day ever being the same the Electronics Design Engineer role offers genuine long-term progression and career development within a first-class manufacturing environment. Responsibilities Include: Specification, simulation and productionisation of electronic hardware. Meeting mission and time-critical deadlines for product delivery. Assisting specification and delivery of new product development. Experience & Skills: Key Skills. Extensive practical experience of electronics design using analogue, FPGAs, microcontrollers and associated firmware. Experience of low-noise systems. Experience of high voltage power supply design. Ability to design complex multilayer surface-mount PCBs for low noise and high voltage. Desirable Skills. Experience of PCB schematic capture and PCB layout ideally with Altium Designer Experience with ARM processors, Xilinx/Altera(Intel) VHDL FPGA design. Understanding of Design for Manufacture. Understanding of RF design techniques. Experience of product validation and certification for international markets. Remuneration: £50,000 - £60,000 Pension 30 days holidays + bank holidays If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. JBRP1_UKTJ
May 02, 2024
Full time
A new and exciting opportunity has arisen for a Electronics Design Engineer to join a market leading instrumentation manufacturing company priding itself on quality. With no day ever being the same the Electronics Design Engineer role offers genuine long-term progression and career development within a first-class manufacturing environment. Responsibilities Include: Specification, simulation and productionisation of electronic hardware. Meeting mission and time-critical deadlines for product delivery. Assisting specification and delivery of new product development. Experience & Skills: Key Skills. Extensive practical experience of electronics design using analogue, FPGAs, microcontrollers and associated firmware. Experience of low-noise systems. Experience of high voltage power supply design. Ability to design complex multilayer surface-mount PCBs for low noise and high voltage. Desirable Skills. Experience of PCB schematic capture and PCB layout ideally with Altium Designer Experience with ARM processors, Xilinx/Altera(Intel) VHDL FPGA design. Understanding of Design for Manufacture. Understanding of RF design techniques. Experience of product validation and certification for international markets. Remuneration: £50,000 - £60,000 Pension 30 days holidays + bank holidays If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business. JBRP1_UKTJ
The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! Important: All applicants must be able to obtain Security Clearance, and as a minimum be living in the UK 5 years. Working: Flexible working hours and some remote working potentials where possible. It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. Glassdoor review. "Promotes and believes in a good work/life balance Interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking group's and communities across the business advocating Equity, Diversity and Inclusion. Responsibilities; Developing embedded, real-time software Assis in future evolutions software. Cover the full software lifecycle from requirements definition and analysis through to software release. Development, integration and verification of software using the Ada language. Software integrated with other software, Simulink algorithms, an RTOS and firmware. System testing is performed on real, target hardware. Effective training; help and support will be provided by our skilled, experienced and supportive team. Experience needed; A solid background in software engineering. Experience with C++, Ada or C. Experience in other software languages such as C, C++, Rust Experience working with a formal design process such as MASCOT, UML and tools E.g. Rhapsody. A passion for software engineering be able to innovate, and think critically to solve complex software problems. Desired; Willing to undertake other system training. For full information, please get in touch:
May 02, 2024
Full time
The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! Important: All applicants must be able to obtain Security Clearance, and as a minimum be living in the UK 5 years. Working: Flexible working hours and some remote working potentials where possible. It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. Glassdoor review. "Promotes and believes in a good work/life balance Interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking group's and communities across the business advocating Equity, Diversity and Inclusion. Responsibilities; Developing embedded, real-time software Assis in future evolutions software. Cover the full software lifecycle from requirements definition and analysis through to software release. Development, integration and verification of software using the Ada language. Software integrated with other software, Simulink algorithms, an RTOS and firmware. System testing is performed on real, target hardware. Effective training; help and support will be provided by our skilled, experienced and supportive team. Experience needed; A solid background in software engineering. Experience with C++, Ada or C. Experience in other software languages such as C, C++, Rust Experience working with a formal design process such as MASCOT, UML and tools E.g. Rhapsody. A passion for software engineering be able to innovate, and think critically to solve complex software problems. Desired; Willing to undertake other system training. For full information, please get in touch:
Job Title:Senior Firmware Engineer Location: Plymouth, Devon Working Arrangement: On-Site 1 Day Per Fortnight Key Experience/Skills: - Demonstrable skills in modern C microcontroller firmware development for embedded devices - Good Knowledge of low-power wireless comms, such as Zigbee BLE/ Bluetooth and WI-FI - It is expected you will have an understanding of electronics and microcontroller-based embedded systems - Your background will include experience with various embedded software development environments including compilers, debuggers, toolchains and emulators Desirable - Experience of low-level communication protocols (SPI, I2C, UART) implementation and debugging - Knowledge of version control principals & experience using a version control tool - Understanding of the software development lifecycle stages and reasons for following this process - Experience with either consumer electronics, IoT or audio product development Education: Degree in Software Engineering, Computer Science, Electrical/electronic Engineering or equivalent is required. JBRP1_UKTJ
May 02, 2024
Full time
Job Title:Senior Firmware Engineer Location: Plymouth, Devon Working Arrangement: On-Site 1 Day Per Fortnight Key Experience/Skills: - Demonstrable skills in modern C microcontroller firmware development for embedded devices - Good Knowledge of low-power wireless comms, such as Zigbee BLE/ Bluetooth and WI-FI - It is expected you will have an understanding of electronics and microcontroller-based embedded systems - Your background will include experience with various embedded software development environments including compilers, debuggers, toolchains and emulators Desirable - Experience of low-level communication protocols (SPI, I2C, UART) implementation and debugging - Knowledge of version control principals & experience using a version control tool - Understanding of the software development lifecycle stages and reasons for following this process - Experience with either consumer electronics, IoT or audio product development Education: Degree in Software Engineering, Computer Science, Electrical/electronic Engineering or equivalent is required. JBRP1_UKTJ
Embedded Firmware Engineer - Contract, London, Outside IR35 Our client are a soon to be recognise house hold name within the green tech sector. An exceptional reputation for the products and services they are providing. Currently in need of contract Firmware Engineer for an initial 3 month period with the view to continue. You will have: - Design, development and test experience of custom Firmware systems - Advanced knowledge of C programming in embedded environments - Experience with low level software on microcontrollers - Experience integrating third party HAL Libraries to drive custom hardware - Knowledge of Python / C++ would be a bonus Please send your CV for immediate consideration.
May 02, 2024
Contractor
Embedded Firmware Engineer - Contract, London, Outside IR35 Our client are a soon to be recognise house hold name within the green tech sector. An exceptional reputation for the products and services they are providing. Currently in need of contract Firmware Engineer for an initial 3 month period with the view to continue. You will have: - Design, development and test experience of custom Firmware systems - Advanced knowledge of C programming in embedded environments - Experience with low level software on microcontrollers - Experience integrating third party HAL Libraries to drive custom hardware - Knowledge of Python / C++ would be a bonus Please send your CV for immediate consideration.
Our leading client is looking for Embedded Software Engineer based at Edinburgh. Strong embedded programming skills are necessary, as well as a good understanding of latest technology and electronics. Embedded Python C/C++ software development RTOS Embedded Software/Firmware Experience with Bluetooth Chipsets Wireless communication protocols- USB, Bluetooth, Zigbee, Wi-Fi. Expereince in Power Electronics Please submit your CV.
May 01, 2024
Full time
Our leading client is looking for Embedded Software Engineer based at Edinburgh. Strong embedded programming skills are necessary, as well as a good understanding of latest technology and electronics. Embedded Python C/C++ software development RTOS Embedded Software/Firmware Experience with Bluetooth Chipsets Wireless communication protocols- USB, Bluetooth, Zigbee, Wi-Fi. Expereince in Power Electronics Please submit your CV.
Embedded Systems Engineer £ 45 - 65k Oxford Hybrid 2/3 days in office My client is a rapidly growing company in their niche researching and manufacturing groundbreaking products for market launch. Due to sustained success, they're growing their product teams. Main duties: + Oversee productization + Design and develop electronics and microsystems, encompassing various subsystems and I/O interfaces. + Program firmware as needed, and create software for interfacing with microcontroller- and FPGA-based peripherals. + Manage product development, conduct design reviews, and oversee technical priorities, deadlines, and deliverables. Skills and Experience Required: + Master's degree in electrical/computer engineering, or equivalent + Proficient in Python, Rust or C, and firmware programming + Proficiency in circuit design software (e.g., Altium) and circuit simulation. + Experience in hardware product development, electrical test, verification, and validation of products and subsystems. What you'll get: + £40-65k salary, with potential for rapid growth + Generous company pension scheme + Unlimited Paid Time Off If you feel like you have the right skills and experience for this role, then please apply with a copy of your updated CV.
May 01, 2024
Full time
Embedded Systems Engineer £ 45 - 65k Oxford Hybrid 2/3 days in office My client is a rapidly growing company in their niche researching and manufacturing groundbreaking products for market launch. Due to sustained success, they're growing their product teams. Main duties: + Oversee productization + Design and develop electronics and microsystems, encompassing various subsystems and I/O interfaces. + Program firmware as needed, and create software for interfacing with microcontroller- and FPGA-based peripherals. + Manage product development, conduct design reviews, and oversee technical priorities, deadlines, and deliverables. Skills and Experience Required: + Master's degree in electrical/computer engineering, or equivalent + Proficient in Python, Rust or C, and firmware programming + Proficiency in circuit design software (e.g., Altium) and circuit simulation. + Experience in hardware product development, electrical test, verification, and validation of products and subsystems. What you'll get: + £40-65k salary, with potential for rapid growth + Generous company pension scheme + Unlimited Paid Time Off If you feel like you have the right skills and experience for this role, then please apply with a copy of your updated CV.
This is a newly created role for an IBM iSeries Systems Administrator to join a leading IT consultancy in the Dorking area of Surrey. This role is paying £55,000 and offers hybrid working (circa 3 days office / 2 days home). To be considered for this iSeries Administrator role you will have a solid background with IBMi OS Enterprise (AS/400 & IBM iSeries) and IBM Power servers - across configuring, monitoring, automating, storage & disaster recovery. This will include ideally working with iSeries Backup As A Service, Disaster Recovery As A Service, and Hosting As A Service. Working on an IBMi Service Desk in a small team of iSeries specialists you will provide remote customer support and remote data centre support to enterprise IBM environments. In addition to BAU support, you will also be responsible for scheduled OS upgrades, firmware upgrades, DR tests and Data Restore tests. Any further experience with enterprise storage systems such as IBM, PURE, EMC &/or HP; and replication & backup tools such as Commvault, Mimix, Maxava, &/or Q-EDD. Based in Dorking my client offers hybrid working of circa 3 days in the office and 2 days working from home. Please note - there will be 1 week a month of on-call support - there is an additional weekly bonus for being on call + time & half / double pay for carrying out work. This role pays £55,000 and offers the chance to work with an impressive array of enterprise clients in the iSeries space. If you are an experienced iSeries Sys Admin, AS/400 Sys Admin, IBMi Service Desk Analyst, IBM I Administrator, IBMi Engineer or IBM I Specialist and you are looking for a new challenge please send me your CV immediately.
May 01, 2024
Full time
This is a newly created role for an IBM iSeries Systems Administrator to join a leading IT consultancy in the Dorking area of Surrey. This role is paying £55,000 and offers hybrid working (circa 3 days office / 2 days home). To be considered for this iSeries Administrator role you will have a solid background with IBMi OS Enterprise (AS/400 & IBM iSeries) and IBM Power servers - across configuring, monitoring, automating, storage & disaster recovery. This will include ideally working with iSeries Backup As A Service, Disaster Recovery As A Service, and Hosting As A Service. Working on an IBMi Service Desk in a small team of iSeries specialists you will provide remote customer support and remote data centre support to enterprise IBM environments. In addition to BAU support, you will also be responsible for scheduled OS upgrades, firmware upgrades, DR tests and Data Restore tests. Any further experience with enterprise storage systems such as IBM, PURE, EMC &/or HP; and replication & backup tools such as Commvault, Mimix, Maxava, &/or Q-EDD. Based in Dorking my client offers hybrid working of circa 3 days in the office and 2 days working from home. Please note - there will be 1 week a month of on-call support - there is an additional weekly bonus for being on call + time & half / double pay for carrying out work. This role pays £55,000 and offers the chance to work with an impressive array of enterprise clients in the iSeries space. If you are an experienced iSeries Sys Admin, AS/400 Sys Admin, IBMi Service Desk Analyst, IBM I Administrator, IBMi Engineer or IBM I Specialist and you are looking for a new challenge please send me your CV immediately.
The Recruitment Bureau (Kent) Ltd
Roade, Northamptonshire
Salary 55,000 - 60,000 GBP per year Requirements: - Microcontroller Firmware development- STM32/PIC Multi Platform Experiuence - PIC, ARM, Atmel, AVR, LoRa Responsibilities: - The Senior Firmware Development Engineer should ideally have: 10 years' industry experience or BEng Degree in Electrical & Electronic Engineering or the equivalent with minimum 7 years of experience Ability to demonstrate previous product development from concept through to production Strong experience with microcontroller device firmware development for STM32/PIC Multi-platform experienced (PIC, ARM, Atmel AVR, LoRa ) Expertise in debugging and improving complex software systems Experience interfacing with embedded hardware using protocols such as UART, I2C, SPI, RS232, USB, Ethernet Experience with designing, developing and verifying electronic schematics advantageous The Senior Firmware Development Engineer role requires the following skills: Being the main point of contact for all technical aspects from design, development, and manufacture Being hands on Ability to pick-up projects already in-progress and work on fully developed codes Working to deadlines and schedules Self-driven and results orientated Responsible for controlling personal workload and identifying any further resource need Ability to work independently and as part of a tea Technologies: - ARM - Altium Designer More: Benefits: - 33 days annual leave (including Bank Holidays), increasing to 38 days after 5 years - Flexible working hours - Comprehensive travel insurance for you and your family - 4% pension contribution match - Employee share scheme - Free annual flu vaccination This is a permanent, full-time, office based role in the UK, near Northampton. The candidate is required to have their own transport due to the location. The successful applicant will be expected to attend the office daily as this is NOT a remote role. About The Company We innovate to secure your present and protect your future, catering to a wide range of organizational security needs. Our success is anchored in the efforts of our employees who contribute to the creation of our innovative, market-leading products and services. We foster a collaborative, friendly workplace environment that values initiative, autonomy, and teamwork. Company Culture Statement As a valued member of staff, you will receive a competitive salary with great working conditions amongst a friendly team. You will have regular personal development interaction with a director and be encouraged to increase and improve your range of skills through mentoring and external sources of knowledge. Exceptional input and actions are recognised and rewarded in this company. Our success is built upon the efforts of our employees. We value our employee family who help build our innovative, market-leading products and services, and deliver robust, personal support to our clients. They do this through collaboration with one another and with our customers, in an open and friendly workplace. We appreciate initiative and autonomy whilst encouraging staff to work together in order to support each other. We have a fail-fast approach to realise any show-stopping tasks early, and learn from this to improve and evolve development cycles. Next Steps If you believe you have the relevant experience, qualifications and skills required for this exciting role then please contact Jeremy Barwick who has been exclusively retained to fill this position. Note This role is office based, with a certain amount of flexibility for time off when necessary, but please be aware that hybrid or remote working is not being offered. Due to the location of the offices, public transport is not readily available and having your own transport would be a distinct advantage.
May 01, 2024
Full time
Salary 55,000 - 60,000 GBP per year Requirements: - Microcontroller Firmware development- STM32/PIC Multi Platform Experiuence - PIC, ARM, Atmel, AVR, LoRa Responsibilities: - The Senior Firmware Development Engineer should ideally have: 10 years' industry experience or BEng Degree in Electrical & Electronic Engineering or the equivalent with minimum 7 years of experience Ability to demonstrate previous product development from concept through to production Strong experience with microcontroller device firmware development for STM32/PIC Multi-platform experienced (PIC, ARM, Atmel AVR, LoRa ) Expertise in debugging and improving complex software systems Experience interfacing with embedded hardware using protocols such as UART, I2C, SPI, RS232, USB, Ethernet Experience with designing, developing and verifying electronic schematics advantageous The Senior Firmware Development Engineer role requires the following skills: Being the main point of contact for all technical aspects from design, development, and manufacture Being hands on Ability to pick-up projects already in-progress and work on fully developed codes Working to deadlines and schedules Self-driven and results orientated Responsible for controlling personal workload and identifying any further resource need Ability to work independently and as part of a tea Technologies: - ARM - Altium Designer More: Benefits: - 33 days annual leave (including Bank Holidays), increasing to 38 days after 5 years - Flexible working hours - Comprehensive travel insurance for you and your family - 4% pension contribution match - Employee share scheme - Free annual flu vaccination This is a permanent, full-time, office based role in the UK, near Northampton. The candidate is required to have their own transport due to the location. The successful applicant will be expected to attend the office daily as this is NOT a remote role. About The Company We innovate to secure your present and protect your future, catering to a wide range of organizational security needs. Our success is anchored in the efforts of our employees who contribute to the creation of our innovative, market-leading products and services. We foster a collaborative, friendly workplace environment that values initiative, autonomy, and teamwork. Company Culture Statement As a valued member of staff, you will receive a competitive salary with great working conditions amongst a friendly team. You will have regular personal development interaction with a director and be encouraged to increase and improve your range of skills through mentoring and external sources of knowledge. Exceptional input and actions are recognised and rewarded in this company. Our success is built upon the efforts of our employees. We value our employee family who help build our innovative, market-leading products and services, and deliver robust, personal support to our clients. They do this through collaboration with one another and with our customers, in an open and friendly workplace. We appreciate initiative and autonomy whilst encouraging staff to work together in order to support each other. We have a fail-fast approach to realise any show-stopping tasks early, and learn from this to improve and evolve development cycles. Next Steps If you believe you have the relevant experience, qualifications and skills required for this exciting role then please contact Jeremy Barwick who has been exclusively retained to fill this position. Note This role is office based, with a certain amount of flexibility for time off when necessary, but please be aware that hybrid or remote working is not being offered. Due to the location of the offices, public transport is not readily available and having your own transport would be a distinct advantage.
Job title: Software Engineer Intern (12 months) - Starting Summer 2024 Project: "Software Development support for Drilling & Measurement Desktop Applications" About Us: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Description and Scope: You will be developing two standalone applications: Application 1 We currently have a licensing application, which generates licenses for our main software (ToolScope). This is a desktop application, which we are going to upgrade into a web-based application. During the rewriting of the license software, the existing functionalities will need to be extracted from the legacy application and a database will need to be created all the licenses already generated will be sorted. This will allow us to then extend the application so that users can view and/or manage the generated licenses. Application 2 One of our highly visible projects, which consists of extracting data from downhole tools using Wired Drill Pipe network. This network allows us to extract data from a well at a high speed. At the surface level, we have an application called WARP which collects all the data in real time. The next phase of the development will consist of developing a simulator which will be feeding the WARP application with simulated data. The aim is to be able to isolate the WARP application during the testing phases without getting the firmware involved. The simulator will be a desktop application (WPF application), which will receive the connection request from WARP and then send data in real time as it is currently done from the tools. Both projects will involve going through the full software development life cycle (planning, investigating, developing, and testing). This is going to be a collaborative work to develop two applications - desktop based applications in WPF and a web-based application. A key focus will be the user experience/user interface as well as using good design patterns to make the solution robust and extendable, as well as unit testable. Deliverables: Support the development of the license software into a web-based application as well as creating a database to sort the history of the licenses already created. Create a software simulator for our Wired Drill Pipe Acquisition Software (WARP 2.x). Required Skills : Knowledge of Object Oriented Programming Languages such as: WPF C# / .NET C++ SQL Qualification: Penultimate or final year in a Bachelors or Masters within Computer Science, Software Engineering or related field. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
May 01, 2024
Full time
Job title: Software Engineer Intern (12 months) - Starting Summer 2024 Project: "Software Development support for Drilling & Measurement Desktop Applications" About Us: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Description and Scope: You will be developing two standalone applications: Application 1 We currently have a licensing application, which generates licenses for our main software (ToolScope). This is a desktop application, which we are going to upgrade into a web-based application. During the rewriting of the license software, the existing functionalities will need to be extracted from the legacy application and a database will need to be created all the licenses already generated will be sorted. This will allow us to then extend the application so that users can view and/or manage the generated licenses. Application 2 One of our highly visible projects, which consists of extracting data from downhole tools using Wired Drill Pipe network. This network allows us to extract data from a well at a high speed. At the surface level, we have an application called WARP which collects all the data in real time. The next phase of the development will consist of developing a simulator which will be feeding the WARP application with simulated data. The aim is to be able to isolate the WARP application during the testing phases without getting the firmware involved. The simulator will be a desktop application (WPF application), which will receive the connection request from WARP and then send data in real time as it is currently done from the tools. Both projects will involve going through the full software development life cycle (planning, investigating, developing, and testing). This is going to be a collaborative work to develop two applications - desktop based applications in WPF and a web-based application. A key focus will be the user experience/user interface as well as using good design patterns to make the solution robust and extendable, as well as unit testable. Deliverables: Support the development of the license software into a web-based application as well as creating a database to sort the history of the licenses already created. Create a software simulator for our Wired Drill Pipe Acquisition Software (WARP 2.x). Required Skills : Knowledge of Object Oriented Programming Languages such as: WPF C# / .NET C++ SQL Qualification: Penultimate or final year in a Bachelors or Masters within Computer Science, Software Engineering or related field. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
Job title: Embedded Software Engineer Intern (12 months) - Starting Summer 2024 Project: " Designing, developing & testing Embedded Software solutions for downhole systems " About Us: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer.Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Description and Scope: You will be working with a co-located team of 30+ experienced engineers, including other software professionals within a larger multifunctional engineering team. Designing, developing, and testing new embedded software solutions for downhole drilling systems. You will have the opportunity to collaborate with other experts (electrical engineers, mechanical engineers, physicists, designers, etc.) in the development of new products and concepts. Deliverables: Your tasks will include: Gather requirements from Stakeholders. Collaborate with other disciplines and with other engineering projects. Maintain Continuous Integration infrastructure for applications developed. Perform tests and troubleshooting on application in deployed environments. Communicate effectively with end users to assist in roll out of new firmware features. Required Skills : Knowledge of C / C++ for Embedded Knowledge of hardware & software tools, emulators and simulators Knowledge of RTOS: FreeRTOS / OpenRTOS / DSP BIOS Elementary physics (force, acceleration, torque, etc.) Exposure to any of the following would be a plus: FPGA VHDL, Unit testing, Static analysis tools, UML design Qualifications: Penultimate or final year in a Bachelors or Masters within Computer Science or related field. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
May 01, 2024
Full time
Job title: Embedded Software Engineer Intern (12 months) - Starting Summer 2024 Project: " Designing, developing & testing Embedded Software solutions for downhole systems " About Us: We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer.Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Stonehouse, Gloucestershire, UK. Stonehouse Technology Centre (SHTC) is the SLB drilling Centre of Excellence. It supports SLB through innovative engineering and quality-driven manufacturing, with portfolio emphasis on rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use, and power source products. Over 300 employees work in SHTC's modern, fit-for-purpose building in scenic Gloucestershire. The facility was constructed to handle future demand for PowerDrive tools with an efficient workflow that ensures assembled tools are extensively and rigorously tested before delivery. On site, tools can be monitored using state of-the-art hardware and connectivity that link SHTC to all field locations. SHTC continues Research & Development investment for new technologies, extending operational limits so that clients can reach hotter, deeper reserves. Description and Scope: You will be working with a co-located team of 30+ experienced engineers, including other software professionals within a larger multifunctional engineering team. Designing, developing, and testing new embedded software solutions for downhole drilling systems. You will have the opportunity to collaborate with other experts (electrical engineers, mechanical engineers, physicists, designers, etc.) in the development of new products and concepts. Deliverables: Your tasks will include: Gather requirements from Stakeholders. Collaborate with other disciplines and with other engineering projects. Maintain Continuous Integration infrastructure for applications developed. Perform tests and troubleshooting on application in deployed environments. Communicate effectively with end users to assist in roll out of new firmware features. Required Skills : Knowledge of C / C++ for Embedded Knowledge of hardware & software tools, emulators and simulators Knowledge of RTOS: FreeRTOS / OpenRTOS / DSP BIOS Elementary physics (force, acceleration, torque, etc.) Exposure to any of the following would be a plus: FPGA VHDL, Unit testing, Static analysis tools, UML design Qualifications: Penultimate or final year in a Bachelors or Masters within Computer Science or related field. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
A SeniorFPGA Engineer with 3+ years commercial experience,a strong academic record and a background involving communication systemsand DSP will be highly rewarded with a fantastic salary package and Hybrid working (1-3 daysin office per week). About the company: Our Client is an award- winning global leader in the design and development of critical satellite communications infrastructure; enjoying continued growth and innovative technology development. They reward their loyal staff with a wealth of benefits and development opportunities. Competencies should include: Minimum of a good Bachelors Degree in Electronics related discipline. 3+ years experience of FPGA implementation of communication systems. Experience working with FPGA synthesis tools such as Synplify, Vivado, Quartus. Knowledge of SoC FPGAs such as Zynq or Cyclone device families. DSP Algorithm implementation in Verilog. Extensive experience writing FPGA test benches. The Senior FPGA Engineer role: Reporting to the Digital RF Lead, the successful Senior FPGA Engineer will be responsible for designing, developing and testing digital intermediate frequency systems utilising field-programmable-gate-arrays (FPGAs)- developing the latest digital IF distribution products for the companys extensive product portfolio. This will include producing HDL code for VITA-49 or similar network SDR transport protocols; designing and implementing digital IF algorithms and architectures using VHDL or Verilog, developing and testing FPGA firmware and software as well as performing simulation and verification of FPGA designs. Remuneration Package: A generous base salary will be offered up to C£80K for a Senior level FPGA Engineer, with applications also welcome from Principal FPGA Engineer with a higher salary relative to the level of skills and experience. Hybrid working is available and flexible starting times offered to maintain a good work /life balance. Holiday starts at 25 days per year, with an option to buy / sell days and entitlement increases with length of service. There is a casual dress code, free drinks, fruit and snacks, A good Pension Plan and Annual Bonus scheme. Wellbeing support including free eye tests and there are discounts offered on gym membership, shopping and days out. JBRP1_UKTJ
May 01, 2024
Full time
A SeniorFPGA Engineer with 3+ years commercial experience,a strong academic record and a background involving communication systemsand DSP will be highly rewarded with a fantastic salary package and Hybrid working (1-3 daysin office per week). About the company: Our Client is an award- winning global leader in the design and development of critical satellite communications infrastructure; enjoying continued growth and innovative technology development. They reward their loyal staff with a wealth of benefits and development opportunities. Competencies should include: Minimum of a good Bachelors Degree in Electronics related discipline. 3+ years experience of FPGA implementation of communication systems. Experience working with FPGA synthesis tools such as Synplify, Vivado, Quartus. Knowledge of SoC FPGAs such as Zynq or Cyclone device families. DSP Algorithm implementation in Verilog. Extensive experience writing FPGA test benches. The Senior FPGA Engineer role: Reporting to the Digital RF Lead, the successful Senior FPGA Engineer will be responsible for designing, developing and testing digital intermediate frequency systems utilising field-programmable-gate-arrays (FPGAs)- developing the latest digital IF distribution products for the companys extensive product portfolio. This will include producing HDL code for VITA-49 or similar network SDR transport protocols; designing and implementing digital IF algorithms and architectures using VHDL or Verilog, developing and testing FPGA firmware and software as well as performing simulation and verification of FPGA designs. Remuneration Package: A generous base salary will be offered up to C£80K for a Senior level FPGA Engineer, with applications also welcome from Principal FPGA Engineer with a higher salary relative to the level of skills and experience. Hybrid working is available and flexible starting times offered to maintain a good work /life balance. Holiday starts at 25 days per year, with an option to buy / sell days and entitlement increases with length of service. There is a casual dress code, free drinks, fruit and snacks, A good Pension Plan and Annual Bonus scheme. Wellbeing support including free eye tests and there are discounts offered on gym membership, shopping and days out. JBRP1_UKTJ
An FPGA Engineer is required to join a leading supplier of electronics and camera technology. As an FPGA Engineer youll be responsible for the whole design from preliminary specification through to verified firmware providing knowledge of firmware design, test, and verification. As an FPGA Engineer you must have previous experience in the following areas: Five or more years experience working on FPGA click apply for full job details
May 01, 2024
Full time
An FPGA Engineer is required to join a leading supplier of electronics and camera technology. As an FPGA Engineer youll be responsible for the whole design from preliminary specification through to verified firmware providing knowledge of firmware design, test, and verification. As an FPGA Engineer you must have previous experience in the following areas: Five or more years experience working on FPGA click apply for full job details
Location: Chesterfield, Derbyshire (4 Days' Per Week On-Site) Overview of Business & Opportunity: This well-established company has been designing and manufacturing electronic products in-house for over 40 years. They are now looking for another Firmware Engineer to strengthen and add value to their existing team which consists of a variety of Software, Electronic & Mechanical Engineers. Their products use some of the latest technologies to ensure their highly desired status in the market. Key Experience: Write and Debug Embedded C Basic electronic principals Can use and operate test equipment to validate firmware (e.g. Oscilloscope, D.V.M, ICE, Simulators). Knowledge of I2C, SPI protocols. Firmware architectures for low power operation. Report writing Requirements, specifications, verification/validation documents. Education: - Degree in a relevant area such as Electronic or Electrical Engineering JBRP1_UKTJ
May 01, 2024
Full time
Location: Chesterfield, Derbyshire (4 Days' Per Week On-Site) Overview of Business & Opportunity: This well-established company has been designing and manufacturing electronic products in-house for over 40 years. They are now looking for another Firmware Engineer to strengthen and add value to their existing team which consists of a variety of Software, Electronic & Mechanical Engineers. Their products use some of the latest technologies to ensure their highly desired status in the market. Key Experience: Write and Debug Embedded C Basic electronic principals Can use and operate test equipment to validate firmware (e.g. Oscilloscope, D.V.M, ICE, Simulators). Knowledge of I2C, SPI protocols. Firmware architectures for low power operation. Report writing Requirements, specifications, verification/validation documents. Education: - Degree in a relevant area such as Electronic or Electrical Engineering JBRP1_UKTJ
Chase and Holland Recruitment Ltd
Chesterfield, Derbyshire
Electronics Engineer - Chesterfield - Salary Negotiable Chase & Holland are on the search for a creative and passionate Graduate with Electronics Engineering experience to join a market leading client within their busy New Product Design team in Chesterfield. You will be making a huge difference in the market by bringing your skills and innovative flare to the industry, with enthusiasm and passion for design and ability to manage a variety of projects at one time. Your main responsibility will be to develop your own new ideas and bring to the market new electronic products. In Return You'll Receive: 25 days annual leave + bank holidays Death in service (3 x salary) Pension Free onsite parking Free staff refreshments Responsibilities of the Electronics Engineer: Manage a range of development projects from beginning to end, identifying new market opportunities and ideas to meet emerging needs Provide support to the manufacturing and sales teams by responding to customer queries and supporting planning Have a concise knowledge of the current product range Resolve issues using the technical support programme Take an active part in launching new ranges and refreshing products Create specifications, designs, and prototypes Accurately brief manufacturing and suppliers ensuring deadlines are met Build and maintain strong relationships with suppliers whilst sourcing necessary new ones Required Skills & Experience: Experience within manufacturing techniques and concepts with knowledge of design Experience designing PCBS, writing firmware and hardware design Knowledge and experience designing products with embedded electronics Analytical and ability to spot trends CAD Design experience is desirable If you are interested in finding out about this exciting Electronics Engineer opportunity, click 'apply now'. Chase and Holland acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. We specialise in Finance, Supply Chain, HR and IT recruitment and comfortably service Yorkshire, Derbyshire, Nottinghamshire, Leicestershire, Staffordshire and Lincolnshire marketplaces.
May 01, 2024
Full time
Electronics Engineer - Chesterfield - Salary Negotiable Chase & Holland are on the search for a creative and passionate Graduate with Electronics Engineering experience to join a market leading client within their busy New Product Design team in Chesterfield. You will be making a huge difference in the market by bringing your skills and innovative flare to the industry, with enthusiasm and passion for design and ability to manage a variety of projects at one time. Your main responsibility will be to develop your own new ideas and bring to the market new electronic products. In Return You'll Receive: 25 days annual leave + bank holidays Death in service (3 x salary) Pension Free onsite parking Free staff refreshments Responsibilities of the Electronics Engineer: Manage a range of development projects from beginning to end, identifying new market opportunities and ideas to meet emerging needs Provide support to the manufacturing and sales teams by responding to customer queries and supporting planning Have a concise knowledge of the current product range Resolve issues using the technical support programme Take an active part in launching new ranges and refreshing products Create specifications, designs, and prototypes Accurately brief manufacturing and suppliers ensuring deadlines are met Build and maintain strong relationships with suppliers whilst sourcing necessary new ones Required Skills & Experience: Experience within manufacturing techniques and concepts with knowledge of design Experience designing PCBS, writing firmware and hardware design Knowledge and experience designing products with embedded electronics Analytical and ability to spot trends CAD Design experience is desirable If you are interested in finding out about this exciting Electronics Engineer opportunity, click 'apply now'. Chase and Holland acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. We specialise in Finance, Supply Chain, HR and IT recruitment and comfortably service Yorkshire, Derbyshire, Nottinghamshire, Leicestershire, Staffordshire and Lincolnshire marketplaces.
Location: Cardiff (3 Days' Per Week On-Site) Overview of Business & Opportunity: This globally known business designs and builds their products in-house. They are now looking for another Electronics Engineer to support in their business growth and increase of product manufacturing. Key Experience: - Experience in Analogue and Digital Design- Schematic Capture- PCB Layout & Design (Using Altium)- Testing Electronic Products-Writing/Producing Design documentation Beneficial/Desirable Experience: - Developed/Programmed Embedded C Firmware- Worked on Safety Critical or Highly Regulated Sector Education: - Degree in a relevant area such as Electronic or Electrical Engineering JBRP1_UKTJ
May 01, 2024
Full time
Location: Cardiff (3 Days' Per Week On-Site) Overview of Business & Opportunity: This globally known business designs and builds their products in-house. They are now looking for another Electronics Engineer to support in their business growth and increase of product manufacturing. Key Experience: - Experience in Analogue and Digital Design- Schematic Capture- PCB Layout & Design (Using Altium)- Testing Electronic Products-Writing/Producing Design documentation Beneficial/Desirable Experience: - Developed/Programmed Embedded C Firmware- Worked on Safety Critical or Highly Regulated Sector Education: - Degree in a relevant area such as Electronic or Electrical Engineering JBRP1_UKTJ
Ideal location - Manchester Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Manchester . Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served 'Field Service Engineer', a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve : Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. Ability to follow documented procedures and adhere to safety and ESD precautions at all times. Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. Ensure process, procedural and contractual agreements are being followed correctly. Endeavour to provide all customers with the best level of customer service and support. Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. Work proactively with call allocators to ensure SLA's are met in the most economic way. Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded Any additional activity as directed by Senior Management Key Experience Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. Manufacturer recognised accreditations, I.E. HP/IBM/Dell. Both Server and Desktop. At least 6 years customer facing IT industry experience. Capable of working independently on a wide range of products. Excellent communication skills. Excellent proven organisational and customer service skills. Able to work under pressure. Able to maintain a consistent high standard of quality and professionalism. Excellent Time management skills. Team Player - ability to work as part of the team to deliver operational excellence. Awareness of ITIL methodologies and best practice. Previous employment in a similar role. Ability to show flexibility to help the changing needs of the team. Adhere to company standards and procedures at all times unless otherwise directed. Maintain excellent customer relationships. Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) Laptop Hardware break fix skills (replace all components) Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) Will form part of an on call rota covering 24 7 365 call outs Senior Engineer good to have experience/skills Netapp - major advantage to hold this Retail/Point of Sale (POS) Personal Attribute Highly enthusiastic, approachable and self motivated to achieve targets. Ability to prioritise workload effectively. A Methodical and accurate approach to the job is critical. Team focused - a genuine passion to deliver excellence through continuous development and improvement. Be able to remain positive at all times and influence those around you. Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. Good relationship management skills. Previous Senior Field Engineer experience desirable. Analytical, with exceptional attention to detail. Innovative thinking, in terms of service quality and improvements Full UK Driving Licence. 'In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ
May 01, 2024
Full time
Ideal location - Manchester Salary - £27000 - 29000 Hours: Monday to Friday, pick up kit by 08:30 as local PUDO working on client site up till 17:30, overtime available Benefits: Car + Parking cards and Fuel cards + Pension + on call payment Start date - ASAP We have an exciting opportunity for a senior field service engineer to join a blue chip organisation on a permanent basis in Manchester . Senior Field Service Engineer will be required to fault find and repair a variety of IT equipment including Servers, PCs, Laptop, printer and point of sales systems (EPOS) at various Customer locations across the UK. Ensuring company processes, procedures and contractual requirements are followed whilst maintaining high levels of customer service. You must be an experienced time served 'Field Service Engineer', a confident communicator at all levels and work well as part of a team. The position will report into Team Leader/Resource Managers (Field) but will also have critical relationships with Call Control and Technical vetting teams with Field Services. The role will involve : Capable of working independently and remotely, required to perform on site troubleshooting on a wide range of products in a software or hardware environment. Proficient in the installation, configuration and support of Server/Desktop/EPOS environment and in addition, be able to connect and install client software for various networking platforms at various customer locations in the UK. Ability to follow documented procedures and adhere to safety and ESD precautions at all times. Be able to demonstrate strong problem solving techniques with the ability to adapt and learn on the job. Develop, grow and maintain professional working relationships with all internal stakeholders Call Control, Tech Vetting teams. Ensure process, procedural and contractual agreements are being followed correctly. Endeavour to provide all customers with the best level of customer service and support. Complete documentation including Field Service Call reports and Customer Checksheets and ensure these are returned within SLA timescales. Work proactively with call allocators to ensure SLA's are met in the most economic way. Have a solid understanding of customers SLA requirement and use initiative to ensure the expectation is met and exceeded Any additional activity as directed by Senior Management Key Experience Have an excellent working knowledge of Server/PC architecture, knowledge of Windows Operating systems, break fix and troubleshooting of Servers, Desktops, EPOS, Laptops, and Printers. Manufacturer recognised accreditations, I.E. HP/IBM/Dell. Both Server and Desktop. At least 6 years customer facing IT industry experience. Capable of working independently on a wide range of products. Excellent communication skills. Excellent proven organisational and customer service skills. Able to work under pressure. Able to maintain a consistent high standard of quality and professionalism. Excellent Time management skills. Team Player - ability to work as part of the team to deliver operational excellence. Awareness of ITIL methodologies and best practice. Previous employment in a similar role. Ability to show flexibility to help the changing needs of the team. Adhere to company standards and procedures at all times unless otherwise directed. Maintain excellent customer relationships. Maintain high levels of Punctuality, Communication, Attitude, Competence and Quality of Service Maintain all appropriate Manufacturer Server Accreditations where app Senior Engineer main skills MUST be able to obtain security clearances, BPSS & SC, (NPPV3 great to have but not essential) X86 Server Hardware break fix Skills (can replace all components, upgrade Bios/firmware) Laptop Hardware break fix skills (replace all components) Must be able to hold Main vendor certifications on Servers & Laptops (Dell, HP, Lenovo) Will form part of an on call rota covering 24 7 365 call outs Senior Engineer good to have experience/skills Netapp - major advantage to hold this Retail/Point of Sale (POS) Personal Attribute Highly enthusiastic, approachable and self motivated to achieve targets. Ability to prioritise workload effectively. A Methodical and accurate approach to the job is critical. Team focused - a genuine passion to deliver excellence through continuous development and improvement. Be able to remain positive at all times and influence those around you. Excellent communicator who can remain objective and focussed with Customers and Internal Agencies alike. Good relationship management skills. Previous Senior Field Engineer experience desirable. Analytical, with exceptional attention to detail. Innovative thinking, in terms of service quality and improvements Full UK Driving Licence. 'In applying for this position, you consent to your personal data being shared with the specified employer and for your details to remain with GTS for as long as is necessary to process your application. See our Privacy Notice for full information Global Technology Solutions is acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ
Yolk Recruitment are working with a world leading Aerospace & Defence company who are looking to add an Embedded Software Engineer to join their existing team. Embedded Software Engineer - SC Cleared - Contract - 12 Months - INSIDE IR35 - Portsmouth - Up to 62.50 per hour - Single Stage Interview Job Title: Embedded Software Engineer Overview of the role: We are looking for a Software Engineer to join our client in Hampshire. You will join our Modem team within the Product Engineering group. The team is undertaking the design and implementation of a satellite communications Software Defined Radio (SDR) modem. You will be part of a small multi-disciplinary team containing software, system, firmware and infrastructure engineers. There will be scope in the future to work on further developments as project needs arise. Responsibilities: You will research and develop aspects of modem products and associated communications systems, using your experience in software within complex systems. Developing software aspects to support the operation of satellite modem products based on Software Defined Radio technologies. Definition, implementation, verification and validation activities associated with these solutions. Work in response to requirements, defining sub-systems, communicating risk and specifying test and verification techniques. Occasionally diagnose software problems in the laboratory prototyping environment. Develop and maintain skills to support on-going and future development. Skillset & Experience Essential Proven modern C++ software engineering on Linux platforms to a high standard Proven modern Java software engineering on Linux/Windows platforms to a high standard Experience of device management interfaces (e.g. SNMP, Web) for design, implementation and test Experience of working with Git for version control and Eclipse CDT for development Knowledge and application of inter-process communication and techniques Desirable Experience of system and software modelling tools such as Enterprise Architect (SysML / UML) Experience of unit and integration test tools (e.g. Google Test, Robot Framework) Experience working in an Agile or Scrum environment would be beneficial (e.g. Atlassian Jira, Confluence, BitBucket) Experience in user interface design, implementation and test using HTML, CSS and JavaScript
May 01, 2024
Contractor
Yolk Recruitment are working with a world leading Aerospace & Defence company who are looking to add an Embedded Software Engineer to join their existing team. Embedded Software Engineer - SC Cleared - Contract - 12 Months - INSIDE IR35 - Portsmouth - Up to 62.50 per hour - Single Stage Interview Job Title: Embedded Software Engineer Overview of the role: We are looking for a Software Engineer to join our client in Hampshire. You will join our Modem team within the Product Engineering group. The team is undertaking the design and implementation of a satellite communications Software Defined Radio (SDR) modem. You will be part of a small multi-disciplinary team containing software, system, firmware and infrastructure engineers. There will be scope in the future to work on further developments as project needs arise. Responsibilities: You will research and develop aspects of modem products and associated communications systems, using your experience in software within complex systems. Developing software aspects to support the operation of satellite modem products based on Software Defined Radio technologies. Definition, implementation, verification and validation activities associated with these solutions. Work in response to requirements, defining sub-systems, communicating risk and specifying test and verification techniques. Occasionally diagnose software problems in the laboratory prototyping environment. Develop and maintain skills to support on-going and future development. Skillset & Experience Essential Proven modern C++ software engineering on Linux platforms to a high standard Proven modern Java software engineering on Linux/Windows platforms to a high standard Experience of device management interfaces (e.g. SNMP, Web) for design, implementation and test Experience of working with Git for version control and Eclipse CDT for development Knowledge and application of inter-process communication and techniques Desirable Experience of system and software modelling tools such as Enterprise Architect (SysML / UML) Experience of unit and integration test tools (e.g. Google Test, Robot Framework) Experience working in an Agile or Scrum environment would be beneficial (e.g. Atlassian Jira, Confluence, BitBucket) Experience in user interface design, implementation and test using HTML, CSS and JavaScript
Be one of the bold and engineer advanced networks with us! How You'll Help Us Connect The World: The Electronic Design Engineer will be a member of our RF Engineering team based out of our Scottish office in Fife. You will be responsible for the development of new designs and cost optimization of the existing products for local manufacture. Candidates must be able to provide real time solutions to design issues discovered in the manufacturing process and recommend/document the resolution. Also, must be knowledgeable in manufacturing processes and technologies to support factory and part evaluations. Responsible for the design, development, evaluation and analysis for an antenna control system. Performs component level design and initial testing. Develops and executes product procedures for production testing and supports integration plans for new or updated products. Test/evaluate competing products and technologies. Ability to Investigate and troubleshoot working prototypes/existing products. Stays current with embedded systems technology and research new technology developments. Documents procedures/processes related from initial designs through to final product manufacturing. Support Sales team and Product Line Management by assisting in the preparation of bids, proposals, and Request for Quote for current and potential customers. Under the leadership of more senior engineers, develop technical solutions/product designs to serve customer requirements. Prepare part specifications. Researches and evaluates potential vendors and makes recommendations as to the final vendor selection. Work closely with our R&D centers in UK, India and China. Required Qualifications For Consideration: Minimum of 3 years of experience with embedded control systems, such as STM32, AVR, Arduino. Firmware design such as microcontroller programming (MATLAB, C, etc), motor motion control and data processing, experienced with programing software such as IAR Systems and Keil MDK-ARM. Electronic control system design experience utilizing sensors, actuators and microcontrollers. Experienced with electronics circuit design and PCB layout capture, experienced with PCB design software such as Mentor Designer, Altium Designer, etc. Familiar with communication protocol such as USB, Serial, Ethernet, etc. Able to design to obtain CE marking. Ability to set up and carry out tests on various electronics components using oscilloscope etc. and creation of test fixtures to support high volume production. Excellent problem solving and communication skills to sufficiently understand customer requirements and deliver results that meet customer requirements. Proficient in English- Good verbal, written and inter-personal communication skills. Self-motivated, creative and able to work independently. Familiar with working with NPI and operations to move product from development to volume. UK Drivers License would be beneficial. You Will Excite Us If You Have: Master degree in Electronics Engineering is preferred Holding patents would be good to have criteria Why Commscope? CommScope is pushing the boundaries of communications technology. For more than 40 years, we've been leaders in innovating 5G, private networks and Gigabit speeds everywhere - we're always anticipating what's next. Developments such as the Internet of Things, seamless connectivity, Cloud and 5G introduce new requirements and demand creative thinking. With our unmatched expertise in copper, fiber, and wireless infrastructure, our global clients rely on us to outperform today and be ready for the needs of tomorrow. CommScope is an Equal Opportunity Employer, including people with disabilities and veterans. To learn more visit
May 01, 2024
Full time
Be one of the bold and engineer advanced networks with us! How You'll Help Us Connect The World: The Electronic Design Engineer will be a member of our RF Engineering team based out of our Scottish office in Fife. You will be responsible for the development of new designs and cost optimization of the existing products for local manufacture. Candidates must be able to provide real time solutions to design issues discovered in the manufacturing process and recommend/document the resolution. Also, must be knowledgeable in manufacturing processes and technologies to support factory and part evaluations. Responsible for the design, development, evaluation and analysis for an antenna control system. Performs component level design and initial testing. Develops and executes product procedures for production testing and supports integration plans for new or updated products. Test/evaluate competing products and technologies. Ability to Investigate and troubleshoot working prototypes/existing products. Stays current with embedded systems technology and research new technology developments. Documents procedures/processes related from initial designs through to final product manufacturing. Support Sales team and Product Line Management by assisting in the preparation of bids, proposals, and Request for Quote for current and potential customers. Under the leadership of more senior engineers, develop technical solutions/product designs to serve customer requirements. Prepare part specifications. Researches and evaluates potential vendors and makes recommendations as to the final vendor selection. Work closely with our R&D centers in UK, India and China. Required Qualifications For Consideration: Minimum of 3 years of experience with embedded control systems, such as STM32, AVR, Arduino. Firmware design such as microcontroller programming (MATLAB, C, etc), motor motion control and data processing, experienced with programing software such as IAR Systems and Keil MDK-ARM. Electronic control system design experience utilizing sensors, actuators and microcontrollers. Experienced with electronics circuit design and PCB layout capture, experienced with PCB design software such as Mentor Designer, Altium Designer, etc. Familiar with communication protocol such as USB, Serial, Ethernet, etc. Able to design to obtain CE marking. Ability to set up and carry out tests on various electronics components using oscilloscope etc. and creation of test fixtures to support high volume production. Excellent problem solving and communication skills to sufficiently understand customer requirements and deliver results that meet customer requirements. Proficient in English- Good verbal, written and inter-personal communication skills. Self-motivated, creative and able to work independently. Familiar with working with NPI and operations to move product from development to volume. UK Drivers License would be beneficial. You Will Excite Us If You Have: Master degree in Electronics Engineering is preferred Holding patents would be good to have criteria Why Commscope? CommScope is pushing the boundaries of communications technology. For more than 40 years, we've been leaders in innovating 5G, private networks and Gigabit speeds everywhere - we're always anticipating what's next. Developments such as the Internet of Things, seamless connectivity, Cloud and 5G introduce new requirements and demand creative thinking. With our unmatched expertise in copper, fiber, and wireless infrastructure, our global clients rely on us to outperform today and be ready for the needs of tomorrow. CommScope is an Equal Opportunity Employer, including people with disabilities and veterans. To learn more visit