Commercial Gas Engineer / Plumber Coventry, West Midlands 23.00 per hour Permanent position A well-established and successful facilities management company based in Coventry are currently looking for a fully qualified Commercial Gas Engineer / Plumber to join their team on a permanent basis. Qualifications & Experience required: Gas Safe registered and relevant certifications including: CODNCC01 or COCN1, CIGA1 and CDGA1 Proven experience as a Commercial Gas Engineer ideally within a Facilities Management or Property / Buildings Maintenance environment Good technical knowledge and experience of working on commercial heating and hot and cold water systems etc. Knowledge of controls is desirable but not essential Excellent troubleshooting and problem-solving skills Commitment to safety and compliance with regulations Effective communication and customer service skills Full, clean driving licence CSCS Card Duties will include: Travelling to commercial sites across the Midlands and sometimes UK wide including schools, hospitals, office complexes etc. Undertaking a wide range of Plumbing and Gas tasks including maintenance, installations, repairs, servicing and fault finding etc. Undertaking further training when necessary, and keeping up to date with the UK gas regulations Keeping relevant job information up to date using tablet / laptop Communicating well with both customers and internal staff to keep everyone fully informed of job progress or issues found etc. Carrying out the job correctly, and on a right the first time basis, within a pre-determined timescale Skills or Personal Attributes welcomed: A passion for delivering high-quality services to a diverse range of customers Have a proactive approach to Plumbing and Gas maintenance and building management work Ability to read and understand instructions and app-based software The ability to work within a team and alone as required depending on the job at hand Have a confident, enthusiastic and pro-active attitude towards work Wanting to achieve success, for him/herself, the business, and the customers A flexible approach to work and working hours (within Working Directives) Additional Information: Working hours are: 40 per week (Monday - Friday 8:00am - 4:30pm with 30 mins lunch break) Work van / Van Share is available for business use only (no personal use) 28 Days holidays including Bank holidays to start A clean DBS check will be required as part of the offer process, and will be taken by the company If you are looking for your next challenge, in a permanent secure position, with a friendly and supportive company, then please get in touch for more information.
May 18, 2024
Full time
Commercial Gas Engineer / Plumber Coventry, West Midlands 23.00 per hour Permanent position A well-established and successful facilities management company based in Coventry are currently looking for a fully qualified Commercial Gas Engineer / Plumber to join their team on a permanent basis. Qualifications & Experience required: Gas Safe registered and relevant certifications including: CODNCC01 or COCN1, CIGA1 and CDGA1 Proven experience as a Commercial Gas Engineer ideally within a Facilities Management or Property / Buildings Maintenance environment Good technical knowledge and experience of working on commercial heating and hot and cold water systems etc. Knowledge of controls is desirable but not essential Excellent troubleshooting and problem-solving skills Commitment to safety and compliance with regulations Effective communication and customer service skills Full, clean driving licence CSCS Card Duties will include: Travelling to commercial sites across the Midlands and sometimes UK wide including schools, hospitals, office complexes etc. Undertaking a wide range of Plumbing and Gas tasks including maintenance, installations, repairs, servicing and fault finding etc. Undertaking further training when necessary, and keeping up to date with the UK gas regulations Keeping relevant job information up to date using tablet / laptop Communicating well with both customers and internal staff to keep everyone fully informed of job progress or issues found etc. Carrying out the job correctly, and on a right the first time basis, within a pre-determined timescale Skills or Personal Attributes welcomed: A passion for delivering high-quality services to a diverse range of customers Have a proactive approach to Plumbing and Gas maintenance and building management work Ability to read and understand instructions and app-based software The ability to work within a team and alone as required depending on the job at hand Have a confident, enthusiastic and pro-active attitude towards work Wanting to achieve success, for him/herself, the business, and the customers A flexible approach to work and working hours (within Working Directives) Additional Information: Working hours are: 40 per week (Monday - Friday 8:00am - 4:30pm with 30 mins lunch break) Work van / Van Share is available for business use only (no personal use) 28 Days holidays including Bank holidays to start A clean DBS check will be required as part of the offer process, and will be taken by the company If you are looking for your next challenge, in a permanent secure position, with a friendly and supportive company, then please get in touch for more information.
At 24/7 Home Rescue we have a fantastic opportunity where we are looking to recruit an experienced Gas Auditor to work on a full-time basis nationally. 24/7 Home Rescue's winning aspiration is to be recognised as the number one home assistance company, providing effortless customer service to 150,000 customers by 2025 through our people and technology. About the department The Compliance Teams winning aspiration is that 24/7 Home Rescue is recognised as a great place for customer service and excellence in gas safety. A place where the customer journey is effortless. Our field engineers are encouraged, engaged, and enabled to provide effortless customer service. Responsible for conducting audits on our inhouse and subcontractor engineer network. Ensuring that all work is conducted in a safe manner. The department is responsible for enforcing policies and planning programs to ensure the legal and ethical integrity of the company. Duties include ensuring that departments adhere to the rules and regulations that the company upholds, planning reports and discussing new rules and regulations with senior management. If you are qualified in the Domestic gas industry, care passionately about quality, and would relish a new challenge then apply now to become part of our expanding team of Gas Safety Inspectors. The successful candidate will be an excellent communicator with proven technical ability in the domestic gas sector and willing to have a 'hands on' approach to carrying out third party independent quality audits. Principle accountabilities: Undertake a predetermined number of audits in an agreed period Assess others work for safety and compliance against industry legislative requirements and best practice Work within a given region and willingness to undertake occasional travel out of their given region but within the U.K. Attending meetings to present findings Dealing with technical enquiries Complying with company policies and procedures Inputting findings using Home Response 360 Ltd digital platform You will be a role model for our values and behaviours: Lead by example Be proactive, supportive, and collaborative. Have a positive attitude to work and to your colleagues. Be open and honest with strong morale principals. Be respectful, showing consideration and regard for others. Embrace change and new ways of working. Look for development opportunities and new experiences. Work collaboratively with colleagues, sharing knowledge and expertise. Build strong relationships with colleagues and stakeholders across the business. Value the experience and opinions of others. Essential Requirements: Experience of working within the gas industry with a detailed knowledge of domestic gas installations Relevant ACS qualifications (CCN1, CENWAT, HTR1, CKR1 Unvented) Willing to have a hands-on approach to carrying out third-party safety and quality audits Up to date knowledge of gas safety and legislation and industry standards Excellent communication and relationship building skills. Willing to travel around a given region Full UK Driving license. Desirable but not essential as full training to our high standards will be provided: A1, A2 assessor (D32,33) assessor qualification - desirable but not essential as training will be provided NVQ level 3, City & Guilds in Gas Installation and Commercial qualifications Experience of working within the compliance sector What's in it for you? Attractive salary package Perfectly timed hire, well positioned for an ambitious individual to grow with the company. A genuine, attentive, and open employer Exciting environment Modern office
May 18, 2024
Full time
At 24/7 Home Rescue we have a fantastic opportunity where we are looking to recruit an experienced Gas Auditor to work on a full-time basis nationally. 24/7 Home Rescue's winning aspiration is to be recognised as the number one home assistance company, providing effortless customer service to 150,000 customers by 2025 through our people and technology. About the department The Compliance Teams winning aspiration is that 24/7 Home Rescue is recognised as a great place for customer service and excellence in gas safety. A place where the customer journey is effortless. Our field engineers are encouraged, engaged, and enabled to provide effortless customer service. Responsible for conducting audits on our inhouse and subcontractor engineer network. Ensuring that all work is conducted in a safe manner. The department is responsible for enforcing policies and planning programs to ensure the legal and ethical integrity of the company. Duties include ensuring that departments adhere to the rules and regulations that the company upholds, planning reports and discussing new rules and regulations with senior management. If you are qualified in the Domestic gas industry, care passionately about quality, and would relish a new challenge then apply now to become part of our expanding team of Gas Safety Inspectors. The successful candidate will be an excellent communicator with proven technical ability in the domestic gas sector and willing to have a 'hands on' approach to carrying out third party independent quality audits. Principle accountabilities: Undertake a predetermined number of audits in an agreed period Assess others work for safety and compliance against industry legislative requirements and best practice Work within a given region and willingness to undertake occasional travel out of their given region but within the U.K. Attending meetings to present findings Dealing with technical enquiries Complying with company policies and procedures Inputting findings using Home Response 360 Ltd digital platform You will be a role model for our values and behaviours: Lead by example Be proactive, supportive, and collaborative. Have a positive attitude to work and to your colleagues. Be open and honest with strong morale principals. Be respectful, showing consideration and regard for others. Embrace change and new ways of working. Look for development opportunities and new experiences. Work collaboratively with colleagues, sharing knowledge and expertise. Build strong relationships with colleagues and stakeholders across the business. Value the experience and opinions of others. Essential Requirements: Experience of working within the gas industry with a detailed knowledge of domestic gas installations Relevant ACS qualifications (CCN1, CENWAT, HTR1, CKR1 Unvented) Willing to have a hands-on approach to carrying out third-party safety and quality audits Up to date knowledge of gas safety and legislation and industry standards Excellent communication and relationship building skills. Willing to travel around a given region Full UK Driving license. Desirable but not essential as full training to our high standards will be provided: A1, A2 assessor (D32,33) assessor qualification - desirable but not essential as training will be provided NVQ level 3, City & Guilds in Gas Installation and Commercial qualifications Experience of working within the compliance sector What's in it for you? Attractive salary package Perfectly timed hire, well positioned for an ambitious individual to grow with the company. A genuine, attentive, and open employer Exciting environment Modern office
Reporting directly to the Supply Chain Manager this role will be based in Norwich and work closely with our Group Supply Chain department in Paris. The successful candidate will provide an effective and economic service to both Offshore Installations and our Onshore Terminals at Bacton & Dimlington. You will need to demonstrate flexibility in your approach, adherence to Group values and provide attention to detail in your work to proactively find solutions to Operational needs. This is a staff position working Monday to Friday, based in our Norwich office, however the role may require periodic travel to other locations. Key Responsibilities Include: â Work closely with the Supply Chain Manager and ensure his role during their absence. â Adopt and implement the Group Supply Chain policies and values. â Collaborate with other departments to identify and maintain resources needed to establish and provide an effective supply chain. â Reviewing and updating supply chain practices in line with company/Group policies, standards, laws and regulations and oversight of any subsequent changes to the process. â Implementing logistic strategies, tracking goods from the origination point to the warehouse. â Develop and maintain detailed inventories of materials and supplies located at warehouses. â Analysing the supply chain data and solving any issues or putting alternative plans in place. â Evaluate and report on KPIs. â Negotiating terms and prices with suppliers, monitoring, and assessing their performance and maintaining cost-effective practices. â Commercial awareness and understanding of terms and conditions and contracting strategies. â Benchmark and negotiate complex goods and services requests in compliance with Site requirements and QSHE policies. â Improve the overall supply chain performance and look for any possible innovations to the process. â Manage and motivate a team of supply chain staff. â Enforce strict adherence to safety standards, supervise the monthly warehouse QHSE meeting. â Perform other related duties as assigned. Supervisory Specific Responsibilities: â Oversee the daily workflow and schedule of the department. â Manage and motivate a team of supply chain staff (Appraisal, Annual leave etc). â Monitor the performance of the supply chain team. Key Skills & Experience Required: â Good communication and Interpersonal skills. â Relationship management skills and active listening. â Complex problem-solving skills. â Strong planning skills. â Comfort with leading and training employees. â An understanding of Microsoft Office packages such as Excel, Word and PowerPoint, Teams. â Working knowledge of SAP MM. â Excellent time management skills and the ability to work under pressure while maintaining accuracy. â Strategic planning and thinking, systems analysis and evaluation. â Previous Oil & Gas experience would be an advantage. â MCIPS desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
May 18, 2024
Full time
Reporting directly to the Supply Chain Manager this role will be based in Norwich and work closely with our Group Supply Chain department in Paris. The successful candidate will provide an effective and economic service to both Offshore Installations and our Onshore Terminals at Bacton & Dimlington. You will need to demonstrate flexibility in your approach, adherence to Group values and provide attention to detail in your work to proactively find solutions to Operational needs. This is a staff position working Monday to Friday, based in our Norwich office, however the role may require periodic travel to other locations. Key Responsibilities Include: â Work closely with the Supply Chain Manager and ensure his role during their absence. â Adopt and implement the Group Supply Chain policies and values. â Collaborate with other departments to identify and maintain resources needed to establish and provide an effective supply chain. â Reviewing and updating supply chain practices in line with company/Group policies, standards, laws and regulations and oversight of any subsequent changes to the process. â Implementing logistic strategies, tracking goods from the origination point to the warehouse. â Develop and maintain detailed inventories of materials and supplies located at warehouses. â Analysing the supply chain data and solving any issues or putting alternative plans in place. â Evaluate and report on KPIs. â Negotiating terms and prices with suppliers, monitoring, and assessing their performance and maintaining cost-effective practices. â Commercial awareness and understanding of terms and conditions and contracting strategies. â Benchmark and negotiate complex goods and services requests in compliance with Site requirements and QSHE policies. â Improve the overall supply chain performance and look for any possible innovations to the process. â Manage and motivate a team of supply chain staff. â Enforce strict adherence to safety standards, supervise the monthly warehouse QHSE meeting. â Perform other related duties as assigned. Supervisory Specific Responsibilities: â Oversee the daily workflow and schedule of the department. â Manage and motivate a team of supply chain staff (Appraisal, Annual leave etc). â Monitor the performance of the supply chain team. Key Skills & Experience Required: â Good communication and Interpersonal skills. â Relationship management skills and active listening. â Complex problem-solving skills. â Strong planning skills. â Comfort with leading and training employees. â An understanding of Microsoft Office packages such as Excel, Word and PowerPoint, Teams. â Working knowledge of SAP MM. â Excellent time management skills and the ability to work under pressure while maintaining accuracy. â Strategic planning and thinking, systems analysis and evaluation. â Previous Oil & Gas experience would be an advantage. â MCIPS desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Gloucester City Homes (GCH) is an ambitious, dynamic housing association with strong community roots. We are focused on building homes and communities where people can thrive and delivering valued services to our customers. We re now seeking a Compliance Coordinator someone to take accountability for organizing the delivery of GCH s Gas and Heating compliance checks, annual servicing, routine & emergency repairs and installations, in accordance with Gas Safety (Installations and Use) Regulations 1998 and other heating regulations. On behalf of the Property directorate, you ll be the central point and lead for access issues and in support of all areas of compliance to ensure we meet our Landlord Health and Safety responsibilities. You will be responsible for the day-to-day organisation of the annual gas servicing diary, service records and administration for a team of directly employed Engineers and external contractors and enable the delivery of a robust maintenance, servicing, and installation service to GCH s property portfolio. You will collate, store and record LGSR s and other heating reports from the internal team, external contractors, and auditing contractors, and work closely with the Compliance Manager and Gas Supervisor to ensure that all legal obligations in respect of Gas Safety are met. This is a hybrid role working 2 days per week in our office in Gloucester and 3 days per week at home. We d like you to Have experience of monitoring performance and productivity of teams and individuals. Have experience of delivering excellent customer service, identifying and solving problems. Have experience of engaging with vulnerable people. Have knowledge of gas and heating regulations and working practices. Have knowledge and experience of compliance around the big six elements (Gas, Electrical, Fire, Lifts, Asbestos and Legionella). Be competent with IT systems to gather, store and process information. Be experienced working with field based Engineers and contractors. Closing Date: 14th June 2024 GCH reserve the right to bring the closing date forward should enough quality applications be received prior to the current closing date. GCH is committed to equal opportunities. We actively encourage applications from all sections of our community, particularly those with lived experience of our work. We celebrate the diverse nature of our customers and colleagues, striving to develop diverse teams where everyone can be their authentic self through an inclusive, family friendly, flexible and fun culture. Our values of pride, quality, integrity and innovation are at the heart of what we do. So if this sounds like you, we d be delighted to hear from you!
May 18, 2024
Full time
Gloucester City Homes (GCH) is an ambitious, dynamic housing association with strong community roots. We are focused on building homes and communities where people can thrive and delivering valued services to our customers. We re now seeking a Compliance Coordinator someone to take accountability for organizing the delivery of GCH s Gas and Heating compliance checks, annual servicing, routine & emergency repairs and installations, in accordance with Gas Safety (Installations and Use) Regulations 1998 and other heating regulations. On behalf of the Property directorate, you ll be the central point and lead for access issues and in support of all areas of compliance to ensure we meet our Landlord Health and Safety responsibilities. You will be responsible for the day-to-day organisation of the annual gas servicing diary, service records and administration for a team of directly employed Engineers and external contractors and enable the delivery of a robust maintenance, servicing, and installation service to GCH s property portfolio. You will collate, store and record LGSR s and other heating reports from the internal team, external contractors, and auditing contractors, and work closely with the Compliance Manager and Gas Supervisor to ensure that all legal obligations in respect of Gas Safety are met. This is a hybrid role working 2 days per week in our office in Gloucester and 3 days per week at home. We d like you to Have experience of monitoring performance and productivity of teams and individuals. Have experience of delivering excellent customer service, identifying and solving problems. Have experience of engaging with vulnerable people. Have knowledge of gas and heating regulations and working practices. Have knowledge and experience of compliance around the big six elements (Gas, Electrical, Fire, Lifts, Asbestos and Legionella). Be competent with IT systems to gather, store and process information. Be experienced working with field based Engineers and contractors. Closing Date: 14th June 2024 GCH reserve the right to bring the closing date forward should enough quality applications be received prior to the current closing date. GCH is committed to equal opportunities. We actively encourage applications from all sections of our community, particularly those with lived experience of our work. We celebrate the diverse nature of our customers and colleagues, striving to develop diverse teams where everyone can be their authentic self through an inclusive, family friendly, flexible and fun culture. Our values of pride, quality, integrity and innovation are at the heart of what we do. So if this sounds like you, we d be delighted to hear from you!
Description: Job Title: Principal Mechanical/ Mechatronics Engineer Location: Centred around London, various UK sites, international opportunities, flexible trust based work policy. Salary: £74 - 90k PA depending on experience Full Time/Part Time: Full Time + Employee Share Option Scheme + Above industry standard holiday (30 days vs 22-25) + Close office over Xmas where possible + £500 personal development grant every year + Fully funded training and professional development opportunities + Unlimited mental health support + 3 months of equal Paternity or Maternity leave + Monthly rewilding donation on your behalf + Cycle to Work scheme About Mission Zero Technologies: MZT is a hardware technology start-up pioneering a breakthrough Direct Air carbon Capture (DAC) technology that can scrub CO2 from the air using a fraction of the energy compared to incumbent technologies developed by the likes of Carbon Engineering and Climeworks. In the past three years, MZT has evolved its technology from concept to pilot plant scale, successfully raising over £8m from a mixture of private and government funding. MZT's technology is a hybrid of approaches, combining efficient solution-phase capture of CO2 with a continuous and compact electrochemical separation technology. Mission Zero's work is guided by our principles of bold curiosity, problem solving acumen and hope for the future. We strive to realise a world where humanity has new tools to fight climate change, permanently remove CO2 from the atmosphere and produce everyday products such as concrete blocks or fuels from atmospheric carbon emissions. To do this we need to realise a decentralised Gigaton supply chain for CO2 sourced directly from the atmosphere. The opportunity: You have the opportunity to join MZT at a pivotal point in our company's history - our transition from an early-stage R&D startup into a product offering, revenue-generating company poised to rapidly scale our direct-air capture technology across the world. MZT is hiring a Principal Mechanical / Mechatronics Engineer, with skills focused on design and delivery of novel machines or system through all stages of the product life cycle - ideally ina chemical industry context. In this role you will finalise design and deliver our first technology deployments at industrial scale. Inheriting MZT product modules designed and built by our historically process engineering focused delivery team and our engineering partners, you will ensure the effective deployment, hook-up and interfacing with host sites. You will be a key member of the Delivery team, shepherding the product definition through final electro-mechanical detailed design toward site deployment at scales of 250 teCO2/year capacity at our Norfolk site up to 5,000 teCO2/year and beyond over the coming years. This will require you to apply experience in product delivery while interfacing with multiple stakeholders internally and externally. The role will be centred around our headquarters in East-Central London, but with periodic day/week assignments to our various emerging UK sites, European suppliers and further international sites in the medium to long term as we expand the business globally. Our vision for our early stage employees is that they own the business with us (literally), grow it with us and become part of the collective story of Mission Zero, taking a catalytic role in its early history and the fight against climate change. What you'll be responsible for: Leading, guiding, reviewing and developing safe electro-mechanical designs internally and with external contractors across numerous MZT projects from 50 te/year research units to 5,000 te/year scale up projects and beyond. Specification, delegation, delivery and review of all required mechanical, electrical, and relevant interdisciplinary design deliverables. Interfacing with all key external vendors for mechanical and electrical packages, especially fabricators and site hosts. Supporting project management team in technical delivery of detailed plant design and analysis for pilot and commercial systems, especially in respect of mechanical and electrical requirements including packaging philosophy and in the interfaces between contractor team engineering disciplines. Applying fundamental engineering knowledge to ensure suitable vendor boundaries are defined with the opportunity to optimise plant and product performance as MZT scales rapidly in the DAC space. Working closely at the mechanical-electrical-control interface, developing, broadening and consolidating control engineering capacity across the company. Expert understanding of EC&I scopes of work including FDS, control panel specification, software programming interfaces, proven record interfacing, practising or leading EC&I engineering. The Ideal Candidate will possess: 10 years minimum industrial experience delivering projects with significant mechanical and electrical design content across multiple industries. MEng Engineering Degree with Mechanical and/or Electrical focus or suitable discipline. Experience and understanding of the full machine/product development cycle (Conceptualisation, design, delivery/commissioning and decommissioning), Ability to use 3D CAD Modelling Software with a PLM system, (SOLIDWORKS & 3DEXPERIENCE preferred) A passion for developing technical solutions for the world's greatest challenges. Evidenced strong practical skills, comfortable with both hands-on work and desk-based tasks. Comfortable working with ambiguity. Expert understanding of mechanical packaging philosophy and procurement. Ability to design and critically evaluate GAs (General Arrangement Drawings), 3D models, P&IDs for vendor scope splits on paper and live plant scales especially from electrical and mechanical perspective. Good understanding of hazard and risk identification especially relating to e.g. PUWER, Machinery Directive, CE / UKCA marking. Appreciation of good design for minimal maintenance approaches. Experience in HAZID, HAZOP, SIL, LOPA & FMEA. Demonstrated understanding of hazard and risk identification especially from control & electrical rating perspective. Breadth of exposure to process unit operations and mechanical packaged systems extending to MV electrical installations and transformer packages Mechanical / electrical inter-discipline specialism in undergraduate / postgraduate studies. Chartered engineering status with IMechE, IEEE, IET or equivalent. Deep understanding of materials in the context of chemical and weathering resistance. Demonstrated experience working with electrodialysis / electrolytic processes and/or absorption, scrubbing, continuous gas-liquid systems, compression, liquefaction. Experience designing, running and supporting research scale, pilots and/or commercial plants. Experience with engineering supply chain management. Basic understanding of fundamental electrochemistry principles and background industrial chemistry knowledge. Familiarity with processes handling CO2. Formal training / qualifications in e.g. machine safety / CMSE. Job Ref: MZT-EngIV-Mech Start Date: 01/02/2024 Hours: Full Time
May 17, 2024
Full time
Description: Job Title: Principal Mechanical/ Mechatronics Engineer Location: Centred around London, various UK sites, international opportunities, flexible trust based work policy. Salary: £74 - 90k PA depending on experience Full Time/Part Time: Full Time + Employee Share Option Scheme + Above industry standard holiday (30 days vs 22-25) + Close office over Xmas where possible + £500 personal development grant every year + Fully funded training and professional development opportunities + Unlimited mental health support + 3 months of equal Paternity or Maternity leave + Monthly rewilding donation on your behalf + Cycle to Work scheme About Mission Zero Technologies: MZT is a hardware technology start-up pioneering a breakthrough Direct Air carbon Capture (DAC) technology that can scrub CO2 from the air using a fraction of the energy compared to incumbent technologies developed by the likes of Carbon Engineering and Climeworks. In the past three years, MZT has evolved its technology from concept to pilot plant scale, successfully raising over £8m from a mixture of private and government funding. MZT's technology is a hybrid of approaches, combining efficient solution-phase capture of CO2 with a continuous and compact electrochemical separation technology. Mission Zero's work is guided by our principles of bold curiosity, problem solving acumen and hope for the future. We strive to realise a world where humanity has new tools to fight climate change, permanently remove CO2 from the atmosphere and produce everyday products such as concrete blocks or fuels from atmospheric carbon emissions. To do this we need to realise a decentralised Gigaton supply chain for CO2 sourced directly from the atmosphere. The opportunity: You have the opportunity to join MZT at a pivotal point in our company's history - our transition from an early-stage R&D startup into a product offering, revenue-generating company poised to rapidly scale our direct-air capture technology across the world. MZT is hiring a Principal Mechanical / Mechatronics Engineer, with skills focused on design and delivery of novel machines or system through all stages of the product life cycle - ideally ina chemical industry context. In this role you will finalise design and deliver our first technology deployments at industrial scale. Inheriting MZT product modules designed and built by our historically process engineering focused delivery team and our engineering partners, you will ensure the effective deployment, hook-up and interfacing with host sites. You will be a key member of the Delivery team, shepherding the product definition through final electro-mechanical detailed design toward site deployment at scales of 250 teCO2/year capacity at our Norfolk site up to 5,000 teCO2/year and beyond over the coming years. This will require you to apply experience in product delivery while interfacing with multiple stakeholders internally and externally. The role will be centred around our headquarters in East-Central London, but with periodic day/week assignments to our various emerging UK sites, European suppliers and further international sites in the medium to long term as we expand the business globally. Our vision for our early stage employees is that they own the business with us (literally), grow it with us and become part of the collective story of Mission Zero, taking a catalytic role in its early history and the fight against climate change. What you'll be responsible for: Leading, guiding, reviewing and developing safe electro-mechanical designs internally and with external contractors across numerous MZT projects from 50 te/year research units to 5,000 te/year scale up projects and beyond. Specification, delegation, delivery and review of all required mechanical, electrical, and relevant interdisciplinary design deliverables. Interfacing with all key external vendors for mechanical and electrical packages, especially fabricators and site hosts. Supporting project management team in technical delivery of detailed plant design and analysis for pilot and commercial systems, especially in respect of mechanical and electrical requirements including packaging philosophy and in the interfaces between contractor team engineering disciplines. Applying fundamental engineering knowledge to ensure suitable vendor boundaries are defined with the opportunity to optimise plant and product performance as MZT scales rapidly in the DAC space. Working closely at the mechanical-electrical-control interface, developing, broadening and consolidating control engineering capacity across the company. Expert understanding of EC&I scopes of work including FDS, control panel specification, software programming interfaces, proven record interfacing, practising or leading EC&I engineering. The Ideal Candidate will possess: 10 years minimum industrial experience delivering projects with significant mechanical and electrical design content across multiple industries. MEng Engineering Degree with Mechanical and/or Electrical focus or suitable discipline. Experience and understanding of the full machine/product development cycle (Conceptualisation, design, delivery/commissioning and decommissioning), Ability to use 3D CAD Modelling Software with a PLM system, (SOLIDWORKS & 3DEXPERIENCE preferred) A passion for developing technical solutions for the world's greatest challenges. Evidenced strong practical skills, comfortable with both hands-on work and desk-based tasks. Comfortable working with ambiguity. Expert understanding of mechanical packaging philosophy and procurement. Ability to design and critically evaluate GAs (General Arrangement Drawings), 3D models, P&IDs for vendor scope splits on paper and live plant scales especially from electrical and mechanical perspective. Good understanding of hazard and risk identification especially relating to e.g. PUWER, Machinery Directive, CE / UKCA marking. Appreciation of good design for minimal maintenance approaches. Experience in HAZID, HAZOP, SIL, LOPA & FMEA. Demonstrated understanding of hazard and risk identification especially from control & electrical rating perspective. Breadth of exposure to process unit operations and mechanical packaged systems extending to MV electrical installations and transformer packages Mechanical / electrical inter-discipline specialism in undergraduate / postgraduate studies. Chartered engineering status with IMechE, IEEE, IET or equivalent. Deep understanding of materials in the context of chemical and weathering resistance. Demonstrated experience working with electrodialysis / electrolytic processes and/or absorption, scrubbing, continuous gas-liquid systems, compression, liquefaction. Experience designing, running and supporting research scale, pilots and/or commercial plants. Experience with engineering supply chain management. Basic understanding of fundamental electrochemistry principles and background industrial chemistry knowledge. Familiarity with processes handling CO2. Formal training / qualifications in e.g. machine safety / CMSE. Job Ref: MZT-EngIV-Mech Start Date: 01/02/2024 Hours: Full Time
Position Maintenance Planner Salary Up to £27,500 per annum. Location Northwest London Working Hours Monday-Friday 8:00am-5:00pm Reporting Into Engineering Manager Tecrec are currently searching for an experienced Maintenance Planner to work for a business who is a rapidly expanding, London-based SME delivering mechanical and electrical services for both the public and private sector. They provide a variety of services from one off installations and servicing to capital investment schemes and planed preventative maintenance programs with an emergency call out service 24 hours a day, 365 days of the year. The Planner will plan and manage engineers and sub-contractors workload/diaries, control the works allocation from pre-arranged programmes and make further appointments for any follow on works. There will be several variables throughout the day that will have to be taken into consideration. There might be a need to issue alternative engineers with further appointments and/or re-plan a job for later time/date, possibly organising additional labour to attend and assist with the works, based on capacity and location or time constraints of completing other major works. Responsibilities The primary role is to ensure that the appointments are completed on time during the day. Any jobs re-arranged for another day must have been authorised by the manager, with the notes fully updated and emails sent to confirm. Ensure that completed PPM tasks comply with statutory and regulatory compliance. Planning the engineers and sub-contractor daily routines and deploying orders/ jobs for attendance. Managing the engineers time throughout the day and prioritising critical works. Updating job statuses. You will update the status of all works orders to completion including client systems and regularly report as to the productivity of the engineers throughout the day. Knowledge The role requires good knowledge of building maintenance services/engineering associated with repairs and installation works, as well as experience within social housing contracts and construction or building services industry. Full understanding and knowledge of responsive repair contracts. Working knowledge of H&S legislation, regulations and ACOPs. Full and sound knowledge of gas distribution and heating system within a domestic setting. Good understanding of contract management and specifications Would you be interested in discussing further? If so, please get in touch for more details!
May 17, 2024
Full time
Position Maintenance Planner Salary Up to £27,500 per annum. Location Northwest London Working Hours Monday-Friday 8:00am-5:00pm Reporting Into Engineering Manager Tecrec are currently searching for an experienced Maintenance Planner to work for a business who is a rapidly expanding, London-based SME delivering mechanical and electrical services for both the public and private sector. They provide a variety of services from one off installations and servicing to capital investment schemes and planed preventative maintenance programs with an emergency call out service 24 hours a day, 365 days of the year. The Planner will plan and manage engineers and sub-contractors workload/diaries, control the works allocation from pre-arranged programmes and make further appointments for any follow on works. There will be several variables throughout the day that will have to be taken into consideration. There might be a need to issue alternative engineers with further appointments and/or re-plan a job for later time/date, possibly organising additional labour to attend and assist with the works, based on capacity and location or time constraints of completing other major works. Responsibilities The primary role is to ensure that the appointments are completed on time during the day. Any jobs re-arranged for another day must have been authorised by the manager, with the notes fully updated and emails sent to confirm. Ensure that completed PPM tasks comply with statutory and regulatory compliance. Planning the engineers and sub-contractor daily routines and deploying orders/ jobs for attendance. Managing the engineers time throughout the day and prioritising critical works. Updating job statuses. You will update the status of all works orders to completion including client systems and regularly report as to the productivity of the engineers throughout the day. Knowledge The role requires good knowledge of building maintenance services/engineering associated with repairs and installation works, as well as experience within social housing contracts and construction or building services industry. Full understanding and knowledge of responsive repair contracts. Working knowledge of H&S legislation, regulations and ACOPs. Full and sound knowledge of gas distribution and heating system within a domestic setting. Good understanding of contract management and specifications Would you be interested in discussing further? If so, please get in touch for more details!
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
May 17, 2024
Full time
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
May 17, 2024
Full time
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
May 17, 2024
Full time
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
Midas Selection (Midlands) Ltd
Sutton Coldfield, West Midlands
Commercial Gas Engineer: Join a Growing Team & Build Local Expertise (Walsall & Surrounding Areas) Are you a skilled and experienced Gas Engineer looking for a stable position with a reputable company? We are partnering with a fantastic business in Walsall searching for passionate Gas Engineers to join their close-knit team. This role offers the opportunity to establish yourself within a well-established company with a strong focus on local work and a healthy work-life balance. What We Offer: Competitive salary: Up to £40,000 per annum Company van provided Sociable working hours: 8am - 4:30pm, Monday - Friday (no weekends!) Generous annual leave package: 28 days Employee discounts: Save on a variety of online and high street retailers On-the-job training and development opportunities for career progression Who You Are: A highly motivated and results-oriented Gas Safe registered engineer Proven experience in boiler installations, ideally within a commercial setting (though not essential) Eager to learn and adapt to new technologies within the industry A strong team player with excellent communication skills Ability to work independently when needed Willing to undergo a DBS check What You'll Do: Install commercial boilers and perform associated mechanical works Operate various power tools and safely manage heavy lifting tasks Assemble and weld heating system components Conduct routine maintenance on existing heating systems Collaborate effectively with colleagues and manage independent projects Ready to Join Our Team? Immediate interviews are available! Don't miss out on this fantastic opportunity. Submit your CV!
May 17, 2024
Full time
Commercial Gas Engineer: Join a Growing Team & Build Local Expertise (Walsall & Surrounding Areas) Are you a skilled and experienced Gas Engineer looking for a stable position with a reputable company? We are partnering with a fantastic business in Walsall searching for passionate Gas Engineers to join their close-knit team. This role offers the opportunity to establish yourself within a well-established company with a strong focus on local work and a healthy work-life balance. What We Offer: Competitive salary: Up to £40,000 per annum Company van provided Sociable working hours: 8am - 4:30pm, Monday - Friday (no weekends!) Generous annual leave package: 28 days Employee discounts: Save on a variety of online and high street retailers On-the-job training and development opportunities for career progression Who You Are: A highly motivated and results-oriented Gas Safe registered engineer Proven experience in boiler installations, ideally within a commercial setting (though not essential) Eager to learn and adapt to new technologies within the industry A strong team player with excellent communication skills Ability to work independently when needed Willing to undergo a DBS check What You'll Do: Install commercial boilers and perform associated mechanical works Operate various power tools and safely manage heavy lifting tasks Assemble and weld heating system components Conduct routine maintenance on existing heating systems Collaborate effectively with colleagues and manage independent projects Ready to Join Our Team? Immediate interviews are available! Don't miss out on this fantastic opportunity. Submit your CV!
Role: Heating Engineer Salary: 37,000 + company van Location: Midlands Mainstay is currently working with a well-established company who are looking for a Heating Engineer in performing planned and reactive maintenance across numerous sites around the Midlands. Our client is a business that offers continuous support and invests a huge amount in their staff and retention. They have grown due to their diverse approach and exhibit strong company values. Role: As an Heating Engineer you will perform Planned Preventive Maintenance as well as Reactive Maintenance As an Heating Engineer you will perform mechanical maintenance across many aspects on site including combi boilers, pipework, taps, toilets, heating systems, plant rooms You will also perform small installations across the site Part of your role will involve assisting in project planning, estimation, and stock control of critical Electrical /mechanical / building fabric spares As a Heating Engineer you will ensure all work completed is compliant and in line with health and safety regulations You will also ensure that you offer great customer service Duties: As an Heating Engineer you must hold relevant qualifications within Mechanical engineer installations e.g. City & guilds level 3 in Plumbing and Heating Holding a qualification in domestic gas would be an advantage You must have experience in a similar role performing maintenance across a large estate Good written and verbal communication is a must Must hold a full UK driving license
May 17, 2024
Full time
Role: Heating Engineer Salary: 37,000 + company van Location: Midlands Mainstay is currently working with a well-established company who are looking for a Heating Engineer in performing planned and reactive maintenance across numerous sites around the Midlands. Our client is a business that offers continuous support and invests a huge amount in their staff and retention. They have grown due to their diverse approach and exhibit strong company values. Role: As an Heating Engineer you will perform Planned Preventive Maintenance as well as Reactive Maintenance As an Heating Engineer you will perform mechanical maintenance across many aspects on site including combi boilers, pipework, taps, toilets, heating systems, plant rooms You will also perform small installations across the site Part of your role will involve assisting in project planning, estimation, and stock control of critical Electrical /mechanical / building fabric spares As a Heating Engineer you will ensure all work completed is compliant and in line with health and safety regulations You will also ensure that you offer great customer service Duties: As an Heating Engineer you must hold relevant qualifications within Mechanical engineer installations e.g. City & guilds level 3 in Plumbing and Heating Holding a qualification in domestic gas would be an advantage You must have experience in a similar role performing maintenance across a large estate Good written and verbal communication is a must Must hold a full UK driving license
Heat Pump Engineer (Electricians and Gas Engineers) Up to 865 Weekly Mon - Fri 6 Months Rolling Contract Glasgow, Edinburgh, Fife The Opportunity We are seeking a skilled Heating Engineer / Air Source Heat Pump Installer to join a well-established Renewables Specialist, working on a major installation project covering over 500 Housing Association Properties across Scotland. Working part of a team of 5 Qualified Engineers, you will be working to complete 10 jobs a week as part of the wider contract. The business are willing and able to put the successful candidate through both their BPEC Heat Pumps Qualification, and also F-GAS through a local college. Qualifications/Skills/Experience Electricians must have 18th edition / registered Electrical Qualification Gas Engineers must have CCN1 / NVQ Plumbing & Heating Full driving licence Benefits Monday - Friday Company Van Fuel Card Tools provided RECenergy solar installations, EV installations and mid to senior management roles, Heat Pump Installation roles, Roofers, Electricians, single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are experts in Smart metering, single and dual fuel metering.
May 17, 2024
Contractor
Heat Pump Engineer (Electricians and Gas Engineers) Up to 865 Weekly Mon - Fri 6 Months Rolling Contract Glasgow, Edinburgh, Fife The Opportunity We are seeking a skilled Heating Engineer / Air Source Heat Pump Installer to join a well-established Renewables Specialist, working on a major installation project covering over 500 Housing Association Properties across Scotland. Working part of a team of 5 Qualified Engineers, you will be working to complete 10 jobs a week as part of the wider contract. The business are willing and able to put the successful candidate through both their BPEC Heat Pumps Qualification, and also F-GAS through a local college. Qualifications/Skills/Experience Electricians must have 18th edition / registered Electrical Qualification Gas Engineers must have CCN1 / NVQ Plumbing & Heating Full driving licence Benefits Monday - Friday Company Van Fuel Card Tools provided RECenergy solar installations, EV installations and mid to senior management roles, Heat Pump Installation roles, Roofers, Electricians, single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are experts in Smart metering, single and dual fuel metering.
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities Weatherford have an exciting opportunity for an experienced IWS (Intelligent Well Systems) Specialist (Fiber Optics) to join the team in our Aberdeen Altens Facility. This is a hands on, rewarding role where you will be performing fiber optic tool building and maintenance of products and tools for the oil and gas industry. This includes but not limited to fiber optic downhole cables, electric downhole cables and associated downhole gauges. Installations could include downhole pressure - temperature gauges, DTS (distributing temperature system) or DAS (data acoustic sensor). The IWS Specialist will be working within a supportive, inclusive team in a fast-paced, progressive environment. Weatherford provide full training on our tools, excellent benefits and fantastic career progression. Roles & Responsibilities: SAFETY, SECURITY & COMPLIANCE Maintains the highest standards of corporate governance, ensuring that all activities are carried out ethically and in compliance with Company's Security, Compliance & HSE policies, Management System, relevant laws, regulations, standards, and industry practices and complies with the Company's Rules to Live By. Places Quality, Health & Safety, Security and protection of the Environment as core values while never intentionally placing employees, our processes, customers or the communities in which we live and work at risk. Seeks continual improvement in Health, Safety, Security & protection of the Environment, taking into account responsible care, process vulnerabilities, public, customer and employee inputs, knowledge and technology and best business practices to exceed customer expectations. QUALITY Responsible for being familiar with the Company's Quality policies and takes an active role in the compliance and improvement of Weatherford's Management System. Maintains service quality as immediate priorities when working across all areas of the business and continually seeks areas for improvement. OPERATIONS Responsible for the day to day running of the fiber optic workshop, stores and field service equipment. Responsible for the Safety, Integrity and Security of all equipment used or delivered for field operations, responsible for ensuring all equipment is returned and any damages or shortages repaired or reported to the Company. Ensuring all cargo summaries, load out lists, documentation prior to load outs are accurate and documented. Responsible for technical receptions, factory acceptance tests and assisting system integrated tests. Offshore on hand support may be required. COMMUNICATION Maintains effective communications with all key stakeholders both internal and where appropriate external. Communicate with R&M Supervisor and Manufacturing on the performance of the quality of the fiber optic systems. FINANCIAL All employees have an accountability to the organization to be financially responsible whether they are in charge of a function budget or simply their own expenses. Costs incurred should be within approved budget, processed within agreed time frames and following the relevant financial policy and procedure. PEOPLE & DEVELOPMENT Employees have a responsibility for developing their own careers within the Company including completing all necessary function, compliance and business standards training to enhance their knowledge, skills and experience. Employees should engage on a regular basis with their line manager to discuss their personal performance, objectives and opportunities to enhance their skills and experience to support their career potential. Supervisors are expected to actively engaging their employees to support talent management through Weatherford's performance management process, including but not limited to talent assessments, succession planning and regular coaching opportunities. Supervisors should collaborate with Human Resources & Training Development to drive strategies for the recruitment and retention of key personal and to foster an environment that supports the attraction and retention of a high performing talented workforce. VISION & LEADERSHIP Demonstrates leadership, ethical behaviour and adherence to Weatherford standards at all times. Qualifications Required: Three years' experience in fiber optics activities. Strong hands-on technical background. Excellent communication, organization, troubleshooting, problem solving and teamwork skills. Positive attitude and a high degree of self-discipline and motivation. Ability to generate clear and concise reports in a timely and professional manner. Proficient using Microsoft Office. Capable of multitasking and working effectively to meet required deadlines. Must be physically able to work in the workshop and offshore when required. Preferred: Three years' experience in oilfield workshop or field activities. HNC / HND or equivalent in Electrical, Electronics, Mechanical or Electromechanical Studies. Knowledge and prior experience of software and hardware installation on Surface Computer Systems.
May 16, 2024
Full time
Overview Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Responsibilities Weatherford have an exciting opportunity for an experienced IWS (Intelligent Well Systems) Specialist (Fiber Optics) to join the team in our Aberdeen Altens Facility. This is a hands on, rewarding role where you will be performing fiber optic tool building and maintenance of products and tools for the oil and gas industry. This includes but not limited to fiber optic downhole cables, electric downhole cables and associated downhole gauges. Installations could include downhole pressure - temperature gauges, DTS (distributing temperature system) or DAS (data acoustic sensor). The IWS Specialist will be working within a supportive, inclusive team in a fast-paced, progressive environment. Weatherford provide full training on our tools, excellent benefits and fantastic career progression. Roles & Responsibilities: SAFETY, SECURITY & COMPLIANCE Maintains the highest standards of corporate governance, ensuring that all activities are carried out ethically and in compliance with Company's Security, Compliance & HSE policies, Management System, relevant laws, regulations, standards, and industry practices and complies with the Company's Rules to Live By. Places Quality, Health & Safety, Security and protection of the Environment as core values while never intentionally placing employees, our processes, customers or the communities in which we live and work at risk. Seeks continual improvement in Health, Safety, Security & protection of the Environment, taking into account responsible care, process vulnerabilities, public, customer and employee inputs, knowledge and technology and best business practices to exceed customer expectations. QUALITY Responsible for being familiar with the Company's Quality policies and takes an active role in the compliance and improvement of Weatherford's Management System. Maintains service quality as immediate priorities when working across all areas of the business and continually seeks areas for improvement. OPERATIONS Responsible for the day to day running of the fiber optic workshop, stores and field service equipment. Responsible for the Safety, Integrity and Security of all equipment used or delivered for field operations, responsible for ensuring all equipment is returned and any damages or shortages repaired or reported to the Company. Ensuring all cargo summaries, load out lists, documentation prior to load outs are accurate and documented. Responsible for technical receptions, factory acceptance tests and assisting system integrated tests. Offshore on hand support may be required. COMMUNICATION Maintains effective communications with all key stakeholders both internal and where appropriate external. Communicate with R&M Supervisor and Manufacturing on the performance of the quality of the fiber optic systems. FINANCIAL All employees have an accountability to the organization to be financially responsible whether they are in charge of a function budget or simply their own expenses. Costs incurred should be within approved budget, processed within agreed time frames and following the relevant financial policy and procedure. PEOPLE & DEVELOPMENT Employees have a responsibility for developing their own careers within the Company including completing all necessary function, compliance and business standards training to enhance their knowledge, skills and experience. Employees should engage on a regular basis with their line manager to discuss their personal performance, objectives and opportunities to enhance their skills and experience to support their career potential. Supervisors are expected to actively engaging their employees to support talent management through Weatherford's performance management process, including but not limited to talent assessments, succession planning and regular coaching opportunities. Supervisors should collaborate with Human Resources & Training Development to drive strategies for the recruitment and retention of key personal and to foster an environment that supports the attraction and retention of a high performing talented workforce. VISION & LEADERSHIP Demonstrates leadership, ethical behaviour and adherence to Weatherford standards at all times. Qualifications Required: Three years' experience in fiber optics activities. Strong hands-on technical background. Excellent communication, organization, troubleshooting, problem solving and teamwork skills. Positive attitude and a high degree of self-discipline and motivation. Ability to generate clear and concise reports in a timely and professional manner. Proficient using Microsoft Office. Capable of multitasking and working effectively to meet required deadlines. Must be physically able to work in the workshop and offshore when required. Preferred: Three years' experience in oilfield workshop or field activities. HNC / HND or equivalent in Electrical, Electronics, Mechanical or Electromechanical Studies. Knowledge and prior experience of software and hardware installation on Surface Computer Systems.
Our Client Heat Pump Installation Engineer required for our client they are a renewables, electrical and heating contractor who have been in business over 25 years, they currently turnover over 10m and employ over 70 members of staff. They currently require a Heat Pump Installation Engineer to join the company due to ongoing growth. They will require the Heat Pump Engineer to travel throughout West Bromwich and surrounding areas. Heat Pump Installation Engineer duties; - Installation of heat pumps throughout both social and private housing sites - Occasional service and repair of heat pump systems, training provided if required - Assisting in design process - Ensure installations are in compliance with MCS - Travel throughout areas such as Birmingham, Stafford, Worcester, Coventry and Telford (The Engineer will be generally be kept locally to their home area) Heat Pump Installation Engineer requirements; - Hold relevant industry qualifications such as BPEC - Heat Pumps (Desirable) - NVQ Level 2 or 3 in plumbing and heating (Desirable) - WRAS Water Regulations (Desirable) - ACS Domestic Gas certs (Desirable) - Based in within a commutable distance of Birmingham, Stafford, Worcester, Coventry and Telford - Full UK Driving Licence Domestic Gas Engineer remuneration; - 38,000 - 46,000 - Overtime - Private medical - Bonus scheme - Company Van inc - 25 days holiday + BH - Further training and development - Pension
May 16, 2024
Full time
Our Client Heat Pump Installation Engineer required for our client they are a renewables, electrical and heating contractor who have been in business over 25 years, they currently turnover over 10m and employ over 70 members of staff. They currently require a Heat Pump Installation Engineer to join the company due to ongoing growth. They will require the Heat Pump Engineer to travel throughout West Bromwich and surrounding areas. Heat Pump Installation Engineer duties; - Installation of heat pumps throughout both social and private housing sites - Occasional service and repair of heat pump systems, training provided if required - Assisting in design process - Ensure installations are in compliance with MCS - Travel throughout areas such as Birmingham, Stafford, Worcester, Coventry and Telford (The Engineer will be generally be kept locally to their home area) Heat Pump Installation Engineer requirements; - Hold relevant industry qualifications such as BPEC - Heat Pumps (Desirable) - NVQ Level 2 or 3 in plumbing and heating (Desirable) - WRAS Water Regulations (Desirable) - ACS Domestic Gas certs (Desirable) - Based in within a commutable distance of Birmingham, Stafford, Worcester, Coventry and Telford - Full UK Driving Licence Domestic Gas Engineer remuneration; - 38,000 - 46,000 - Overtime - Private medical - Bonus scheme - Company Van inc - 25 days holiday + BH - Further training and development - Pension
Would you like to be involved as a Senior Structural Engineer in technically challenging offshore projects from our London Office? At Heerema Marine Contractors, we do something new every day. We operate the world's largest crane vessels and with them we transport, install, and remove offshore structures for the offshore energy markets. Our projects range from installing wind turbines, removing retired offshore oil and gas platforms, and installing platforms up to 50,000 metric tons. By joining us, you will play an important part in our unique maritime adventure. Your role in the story As a Senior Structural Engineeryou will work on projects across all our Business Units; Transport and Installation, Decommissioning and Wind Who will you work with? As a Structural Engineer you can be assigned to one of the business units (Wind, Decommissioning or Transport and Installation). The objective of the Business Unit Wind is to drive the global energy transition by bringing Heerema Marine Contractors' experience to the offshore wind industry. The objective of the Business Unit Decom is to remove offshore installations safely and predictably. This is what Heerema has been doing for over thirty years. For our Business Unit Transport and Installation, we transport and installs offshore structures in a safe, cost effective and sustainable manner. Is this the job for you? You are a team player who organizes and plans your own work and the involvement of others effectively and efficiently. You are quality and result oriented and have the ability to adapt easily when needed. You also take the interests of different divisions of the organization and mutual relations into account on your own initiative. You also have an awareness of the various aspects of the work, which will have a direct impact on the managers and decision makers within the organisation. Furthermore, you will have: A Bachelor and/or Masters degree in Civil Engineering, Mechanical Engineering; A minimum of 5 years' experience in engineering, project preparation and execution of offshore projects; A good understanding of offshore structural engineering; Excellent analytical, practical and pragmatic skills; Good communication skills in English, both spoken and written; Supervisory and coaching skills to provide guidance to less experienced engineers; The ambition to work (temporarily) at yards, offshore on our vessels or in our other offices. Must be eligible to live and work in the UK. Here is what it takes to be a real Heerema colleague Learning mindset, which means being open to feedback, curious, and eager to learn; Personal leadership which means you are an entrepreneur at heart, have the mindset of a founder and take control of your own work and development. Working at Heerema Marine Contractors Making the impossible possible offshore, this is what drives us at Heerema! To execute our offshore projects we must innovate, engineer and develop to find solutions for our clients' challenges. We are passionate about sustainability and are guided by our Sustainability Roadmap to reduce our impact on the planet. Working with Heerema means working in an international, informal, and friendly environment where you will meet likeminded and passionate colleagues. Here's why people love working with us Working on challenging projects; Extensive onboarding process and opportunities to develop; A development program to allow your talents to flourish; Fun team building and social events Excellent perks and benefits, including travel allowance and contributions to your pension and insurance; Holiday; starting at 25 days per annum, and increases with years of service; Interest free loan schemes for cycle to work and season travel tickets; A social safety net with committed colleagues around you; Plenty of digital and real-world activities to get to know colleagues outside your team; A modern and easily accessible office in London. Is this your dream job? Put in your application now! We are looking forward to hearing from you. We are interested in your CV, but we mainly want to find out more about your ambitions, your personality, and what is your motivation to succeed. So be sure to include a brief cover letter explaining why you are the perfect fit for this position. So hit the button, apply, andmake the impossible possible with Heerema. We'd love to meet you! The application process The application process will consist of an online assessment, two interviews and contract negotiations. At the end of the process, we will cordially welcome you aboard. If you feel that you can help us make the impossible possible, you are welcome to send us an open application.
May 16, 2024
Full time
Would you like to be involved as a Senior Structural Engineer in technically challenging offshore projects from our London Office? At Heerema Marine Contractors, we do something new every day. We operate the world's largest crane vessels and with them we transport, install, and remove offshore structures for the offshore energy markets. Our projects range from installing wind turbines, removing retired offshore oil and gas platforms, and installing platforms up to 50,000 metric tons. By joining us, you will play an important part in our unique maritime adventure. Your role in the story As a Senior Structural Engineeryou will work on projects across all our Business Units; Transport and Installation, Decommissioning and Wind Who will you work with? As a Structural Engineer you can be assigned to one of the business units (Wind, Decommissioning or Transport and Installation). The objective of the Business Unit Wind is to drive the global energy transition by bringing Heerema Marine Contractors' experience to the offshore wind industry. The objective of the Business Unit Decom is to remove offshore installations safely and predictably. This is what Heerema has been doing for over thirty years. For our Business Unit Transport and Installation, we transport and installs offshore structures in a safe, cost effective and sustainable manner. Is this the job for you? You are a team player who organizes and plans your own work and the involvement of others effectively and efficiently. You are quality and result oriented and have the ability to adapt easily when needed. You also take the interests of different divisions of the organization and mutual relations into account on your own initiative. You also have an awareness of the various aspects of the work, which will have a direct impact on the managers and decision makers within the organisation. Furthermore, you will have: A Bachelor and/or Masters degree in Civil Engineering, Mechanical Engineering; A minimum of 5 years' experience in engineering, project preparation and execution of offshore projects; A good understanding of offshore structural engineering; Excellent analytical, practical and pragmatic skills; Good communication skills in English, both spoken and written; Supervisory and coaching skills to provide guidance to less experienced engineers; The ambition to work (temporarily) at yards, offshore on our vessels or in our other offices. Must be eligible to live and work in the UK. Here is what it takes to be a real Heerema colleague Learning mindset, which means being open to feedback, curious, and eager to learn; Personal leadership which means you are an entrepreneur at heart, have the mindset of a founder and take control of your own work and development. Working at Heerema Marine Contractors Making the impossible possible offshore, this is what drives us at Heerema! To execute our offshore projects we must innovate, engineer and develop to find solutions for our clients' challenges. We are passionate about sustainability and are guided by our Sustainability Roadmap to reduce our impact on the planet. Working with Heerema means working in an international, informal, and friendly environment where you will meet likeminded and passionate colleagues. Here's why people love working with us Working on challenging projects; Extensive onboarding process and opportunities to develop; A development program to allow your talents to flourish; Fun team building and social events Excellent perks and benefits, including travel allowance and contributions to your pension and insurance; Holiday; starting at 25 days per annum, and increases with years of service; Interest free loan schemes for cycle to work and season travel tickets; A social safety net with committed colleagues around you; Plenty of digital and real-world activities to get to know colleagues outside your team; A modern and easily accessible office in London. Is this your dream job? Put in your application now! We are looking forward to hearing from you. We are interested in your CV, but we mainly want to find out more about your ambitions, your personality, and what is your motivation to succeed. So be sure to include a brief cover letter explaining why you are the perfect fit for this position. So hit the button, apply, andmake the impossible possible with Heerema. We'd love to meet you! The application process The application process will consist of an online assessment, two interviews and contract negotiations. At the end of the process, we will cordially welcome you aboard. If you feel that you can help us make the impossible possible, you are welcome to send us an open application.
This is a great opportunity for an enthusiastic individual to join our Process Safety department. This position will be responsible for providing engineering solutions compliant with Health & Safety regulations, industry codes and standards as well as the assurance of such. This role will support onshore COMAH and offshore OSDR/SCR facilities, providing technical leadership and engineering guidance across all departments including operations and maintenance, wells, projects and decommissioning. For the right candidate there may be the opportunity to lead a team of Safety Engineers. This is a full-time office-based role (Mon-Friday) with infrequent offshore visits. Key Responsibilities Include: Provide technical guidance, coaching and advice to Operations, Engineering and other support teams to ensure compliance with applicable legislation such as COMAH, OSDR/SCR, PFEER, DSEAR, DCR, PSR, PSSR, SOLAS. Develop and lead the programme planning and support for safety studies including but not limited to QRA, FERA, EERA, SGIA, TRIA, RAMS. Responsibility includes budget preparation and control with due considerations for enlisting the support of external consultants to manage peaks in workload. Perform, check and assure consequence modelling including but not limited to gas plume dispersion, flaring and venting, well blowout, thermal radiation, pool and jet fire, blast and overpressure, smoke and gas ingress. Performance standard owner for PFEP, AFP, TR Integrity and Escape and Evacuation, with responsibility for maintaining, updating and assuring these standards. Responsible for the authorisation of Operational Risk Assessments (ORA) for any deviation from these performance standards. Carry out assurance visits on both onshore and offshore operational sites. Support the delivery and maintenance of Safety Cases and COMAH Reports, update and develop underlying safety studies demonstrating how PUK control MAHs to ALARP. Provide technical input and guidance for through reviews, material changes, well notifications, COMOPS and decommissioning. Instrumental role in ensuring all engineering and plant modifications follow a robust Management of Change (MOC) process and are thoroughly assessed for SECE impact. Provide technical guidance on what modification is likely to constitute a material change and ensure the Safety Case and/or COMAH reports are updated to accurately reflect the change. Be able to lead and/or facilitate safety workshops such as HAZID, HAZOP and LOPA for projects and operating facilities ensuring adequate safeguards are identified, be able to recommend additional safeguards as required to meet safety targets. Be able to overcome operational challenges with practical, fit for purpose solutions suitable for ageing installations. Own and update relevant SEMS documentation ensuring all changes to HSE legislations, codes, guidelines and industry standards are interpreted correctly and incorporated. Liaise with regulatory bodies on matters of HSE, understand regulatory drivers and provide guidance to PUK Senior Management on matters of regulatory compliance. Support regulatory inspections inclusive of presentation, reporting and timely delivery on commitments demonstrating compliance with our installation Safety Cases and COMAH reports. Participate and lead incident investigations, complete Root Cause Analysis, delivering reports of a high standard that include SMART corrective and preventative actions. Develop and mentor graduate and more junior engineers. SEC & Personal Safety Tasks: SNS Management of Change - Technical Reviewer SNS Operational Risk Assessment - ORA Engineer Performance Standards - Owner SEMS Documentation - Owner Software Experience: FLARESIM PHAST (Multi-component, 3D) FLACS-CFD, KFX or similar PIPENET Aspen Hysys Bowtie XP or similar PHA Pro Key Requirements Include: Qualifications: BEng/ MEng in either Chemical/ Process or Mechanical engineering, other qualifications may be considered depending on experience Chartered engineer desirable Valid BOSIET/FOET, MIST, CA-EBS desirable however training will be provided Experience: 15+ years' experience with top tier COMAH operators or Offshore UKCS Oil and Gas Operators Thorough understanding of OSRD/SCR2015 and COMAH regulations, including supporting legislation such as PFEER, DSEAR, PSR etc Experience leading a team and developing more junior engineers Experience working with the Competent Authority essential Good knowledge of planning, cost control and document management processes Personal Attributes: Solution based thinker, natural problem solver Adept communicator with the ability to influence decision makers Strong team player Works efficiently to achieve tight deadlines Exceptional organisational skills Meticulous attention to detail Benefits: At Perenco we value and reward our people, offering competitive salaries and a wide range of benefits including: Discretionary Bonus Private Medical Insurance Flexible Benefit Allowance Life Assurance Excellent Pension Provision 25 days holiday + bank holidays Flex Days Profit 'Units' Sharing Scheme
May 16, 2024
Full time
This is a great opportunity for an enthusiastic individual to join our Process Safety department. This position will be responsible for providing engineering solutions compliant with Health & Safety regulations, industry codes and standards as well as the assurance of such. This role will support onshore COMAH and offshore OSDR/SCR facilities, providing technical leadership and engineering guidance across all departments including operations and maintenance, wells, projects and decommissioning. For the right candidate there may be the opportunity to lead a team of Safety Engineers. This is a full-time office-based role (Mon-Friday) with infrequent offshore visits. Key Responsibilities Include: Provide technical guidance, coaching and advice to Operations, Engineering and other support teams to ensure compliance with applicable legislation such as COMAH, OSDR/SCR, PFEER, DSEAR, DCR, PSR, PSSR, SOLAS. Develop and lead the programme planning and support for safety studies including but not limited to QRA, FERA, EERA, SGIA, TRIA, RAMS. Responsibility includes budget preparation and control with due considerations for enlisting the support of external consultants to manage peaks in workload. Perform, check and assure consequence modelling including but not limited to gas plume dispersion, flaring and venting, well blowout, thermal radiation, pool and jet fire, blast and overpressure, smoke and gas ingress. Performance standard owner for PFEP, AFP, TR Integrity and Escape and Evacuation, with responsibility for maintaining, updating and assuring these standards. Responsible for the authorisation of Operational Risk Assessments (ORA) for any deviation from these performance standards. Carry out assurance visits on both onshore and offshore operational sites. Support the delivery and maintenance of Safety Cases and COMAH Reports, update and develop underlying safety studies demonstrating how PUK control MAHs to ALARP. Provide technical input and guidance for through reviews, material changes, well notifications, COMOPS and decommissioning. Instrumental role in ensuring all engineering and plant modifications follow a robust Management of Change (MOC) process and are thoroughly assessed for SECE impact. Provide technical guidance on what modification is likely to constitute a material change and ensure the Safety Case and/or COMAH reports are updated to accurately reflect the change. Be able to lead and/or facilitate safety workshops such as HAZID, HAZOP and LOPA for projects and operating facilities ensuring adequate safeguards are identified, be able to recommend additional safeguards as required to meet safety targets. Be able to overcome operational challenges with practical, fit for purpose solutions suitable for ageing installations. Own and update relevant SEMS documentation ensuring all changes to HSE legislations, codes, guidelines and industry standards are interpreted correctly and incorporated. Liaise with regulatory bodies on matters of HSE, understand regulatory drivers and provide guidance to PUK Senior Management on matters of regulatory compliance. Support regulatory inspections inclusive of presentation, reporting and timely delivery on commitments demonstrating compliance with our installation Safety Cases and COMAH reports. Participate and lead incident investigations, complete Root Cause Analysis, delivering reports of a high standard that include SMART corrective and preventative actions. Develop and mentor graduate and more junior engineers. SEC & Personal Safety Tasks: SNS Management of Change - Technical Reviewer SNS Operational Risk Assessment - ORA Engineer Performance Standards - Owner SEMS Documentation - Owner Software Experience: FLARESIM PHAST (Multi-component, 3D) FLACS-CFD, KFX or similar PIPENET Aspen Hysys Bowtie XP or similar PHA Pro Key Requirements Include: Qualifications: BEng/ MEng in either Chemical/ Process or Mechanical engineering, other qualifications may be considered depending on experience Chartered engineer desirable Valid BOSIET/FOET, MIST, CA-EBS desirable however training will be provided Experience: 15+ years' experience with top tier COMAH operators or Offshore UKCS Oil and Gas Operators Thorough understanding of OSRD/SCR2015 and COMAH regulations, including supporting legislation such as PFEER, DSEAR, PSR etc Experience leading a team and developing more junior engineers Experience working with the Competent Authority essential Good knowledge of planning, cost control and document management processes Personal Attributes: Solution based thinker, natural problem solver Adept communicator with the ability to influence decision makers Strong team player Works efficiently to achieve tight deadlines Exceptional organisational skills Meticulous attention to detail Benefits: At Perenco we value and reward our people, offering competitive salaries and a wide range of benefits including: Discretionary Bonus Private Medical Insurance Flexible Benefit Allowance Life Assurance Excellent Pension Provision 25 days holiday + bank holidays Flex Days Profit 'Units' Sharing Scheme
Liberty has an exciting opportunity for a Gas Installation Engineer to join our team, based in Exeter and surrounding areas of East Devon. You will be working on social housing, on a full-time, permanent basis. You will receive a salary of £30,000 to £39,000 basic per annum (based on experience) Plus OTE of up to £48K, Plus Company Van & Fuel Card Plus Excellent Benefits! Working hours will be 40 click apply for full job details
May 16, 2024
Full time
Liberty has an exciting opportunity for a Gas Installation Engineer to join our team, based in Exeter and surrounding areas of East Devon. You will be working on social housing, on a full-time, permanent basis. You will receive a salary of £30,000 to £39,000 basic per annum (based on experience) Plus OTE of up to £48K, Plus Company Van & Fuel Card Plus Excellent Benefits! Working hours will be 40 click apply for full job details
Right Now Recruitment
Northampton, Northamptonshire
Right Now Group are currently partnered with an industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Installations Engineering team covering all of the UK after a continued period of sustained growth. If you are an experienced field-based Electrical/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! Electrical Installations/ Field Service/ Fire and Security/ Alarm systems/ Refrigeration/ Air Conditioning/ Catering equipment/ White goods IMPORTANT: Full Training will be provided as well as a company van - please note all applicants must have a full drivers license due to the nature of this role. Please note: Overnight travel is required for this role. Job Title: Installation Engineer Weekly Hours: 40 hours Monday - Friday, Overnight travel 2-3 days a week Salary: £28-£36k DOE Role Type: Full - Time Permanent Location: Field Based, covering whole of UK Role Description Control panel wiring, onsite modification and fault finding Partake in and carry out machine installations and commissioning as required Ensure that all Technical Documentation is kept available and up to date Ensure that at all times you promote the Best Practise approach to your duties Desirable Previous experience in maintenance or some form of mechanics/electrics Experience working with single and 3 phase electricity supplies Knowledge of fire and security, control panels or working on commercial sites CSCS or F-gas experience - not essential Experience in working out on the road from a van or car Good customer relationship skills Flexible approach to working hours and days Experience in a Field Service Engineering or Technician role Electrical qualification, City & Guilds, NVQ etc Electrical knowledge
May 16, 2024
Full time
Right Now Group are currently partnered with an industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Installations Engineering team covering all of the UK after a continued period of sustained growth. If you are an experienced field-based Electrical/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! Electrical Installations/ Field Service/ Fire and Security/ Alarm systems/ Refrigeration/ Air Conditioning/ Catering equipment/ White goods IMPORTANT: Full Training will be provided as well as a company van - please note all applicants must have a full drivers license due to the nature of this role. Please note: Overnight travel is required for this role. Job Title: Installation Engineer Weekly Hours: 40 hours Monday - Friday, Overnight travel 2-3 days a week Salary: £28-£36k DOE Role Type: Full - Time Permanent Location: Field Based, covering whole of UK Role Description Control panel wiring, onsite modification and fault finding Partake in and carry out machine installations and commissioning as required Ensure that all Technical Documentation is kept available and up to date Ensure that at all times you promote the Best Practise approach to your duties Desirable Previous experience in maintenance or some form of mechanics/electrics Experience working with single and 3 phase electricity supplies Knowledge of fire and security, control panels or working on commercial sites CSCS or F-gas experience - not essential Experience in working out on the road from a van or car Good customer relationship skills Flexible approach to working hours and days Experience in a Field Service Engineering or Technician role Electrical qualification, City & Guilds, NVQ etc Electrical knowledge
Right Now Group are currently partnered with an industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Installations Engineering team covering all of the UK after a continued period of sustained growth. If you are an experienced field-based Electrical/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! Electrical Installations/ Field Service/ Fire and Security/ Alarm systems/ Refrigeration/ Air Conditioning/ Catering equipment/ White goods IMPORTANT: Full Training will be provided as well as a company van - please note all applicants must have a full drivers license due to the nature of this role. Please note: Overnight travel is required for this role. Job Title: Installation Engineer Weekly Hours: 40 hours Monday - Friday, Overnight travel 2-3 days a week Salary: £28-£36k DOE Role Type: Full - Time Permanent Location: Field Based, covering whole of UK Role Description Control panel wiring, onsite modification and fault finding Partake in and carry out machine installations and commissioning as required Ensure that all Technical Documentation is kept available and up to date Ensure that at all times you promote the Best Practise approach to your duties Desirable Previous experience in maintenance or some form of mechanics/electrics Experience working with single and 3 phase electricity supplies Knowledge of fire and security, control panels or working on commercial sites CSCS or F-gas experience - not essential Experience in working out on the road from a van or car Good customer relationship skills Flexible approach to working hours and days Experience in a Field Service Engineering or Technician role Electrical qualification, City & Guilds, NVQ etc Electrical knowledge
May 15, 2024
Full time
Right Now Group are currently partnered with an industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Installations Engineering team covering all of the UK after a continued period of sustained growth. If you are an experienced field-based Electrical/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! Electrical Installations/ Field Service/ Fire and Security/ Alarm systems/ Refrigeration/ Air Conditioning/ Catering equipment/ White goods IMPORTANT: Full Training will be provided as well as a company van - please note all applicants must have a full drivers license due to the nature of this role. Please note: Overnight travel is required for this role. Job Title: Installation Engineer Weekly Hours: 40 hours Monday - Friday, Overnight travel 2-3 days a week Salary: £28-£36k DOE Role Type: Full - Time Permanent Location: Field Based, covering whole of UK Role Description Control panel wiring, onsite modification and fault finding Partake in and carry out machine installations and commissioning as required Ensure that all Technical Documentation is kept available and up to date Ensure that at all times you promote the Best Practise approach to your duties Desirable Previous experience in maintenance or some form of mechanics/electrics Experience working with single and 3 phase electricity supplies Knowledge of fire and security, control panels or working on commercial sites CSCS or F-gas experience - not essential Experience in working out on the road from a van or car Good customer relationship skills Flexible approach to working hours and days Experience in a Field Service Engineering or Technician role Electrical qualification, City & Guilds, NVQ etc Electrical knowledge
Right Now Group are currently partnered with an industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Installations Engineering team covering all of the UK after a continued period of sustained growth. If you are an experienced field-based Electrical/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! Electrical Installations/ Field Service/ Fire and Security/ Alarm systems/ Refrigeration/ Air Conditioning/ Catering equipment/ White goods IMPORTANT: Full Training will be provided as well as a company van - please note all applicants must have a full drivers license due to the nature of this role. Please note: Overnight travel is required for this role. Job Title: Installation Engineer Weekly Hours: 40 hours Monday - Friday, Overnight travel 2-3 days a week Salary: £28-£36k DOE Role Type: Full - Time Permanent Location: Field Based, covering whole of UK Role Description Control panel wiring, onsite modification and fault finding Partake in and carry out machine installations and commissioning as required Ensure that all Technical Documentation is kept available and up to date Ensure that at all times you promote the Best Practise approach to your duties Desirable Previous experience in maintenance or some form of mechanics/electrics Experience working with single and 3 phase electricity supplies Knowledge of fire and security, control panels or working on commercial sites CSCS or F-gas experience - not essential Experience in working out on the road from a van or car Good customer relationship skills Flexible approach to working hours and days Experience in a Field Service Engineering or Technician role Electrical qualification, City & Guilds, NVQ etc Electrical knowledge
May 15, 2024
Full time
Right Now Group are currently partnered with an industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Installations Engineering team covering all of the UK after a continued period of sustained growth. If you are an experienced field-based Electrical/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! Electrical Installations/ Field Service/ Fire and Security/ Alarm systems/ Refrigeration/ Air Conditioning/ Catering equipment/ White goods IMPORTANT: Full Training will be provided as well as a company van - please note all applicants must have a full drivers license due to the nature of this role. Please note: Overnight travel is required for this role. Job Title: Installation Engineer Weekly Hours: 40 hours Monday - Friday, Overnight travel 2-3 days a week Salary: £28-£36k DOE Role Type: Full - Time Permanent Location: Field Based, covering whole of UK Role Description Control panel wiring, onsite modification and fault finding Partake in and carry out machine installations and commissioning as required Ensure that all Technical Documentation is kept available and up to date Ensure that at all times you promote the Best Practise approach to your duties Desirable Previous experience in maintenance or some form of mechanics/electrics Experience working with single and 3 phase electricity supplies Knowledge of fire and security, control panels or working on commercial sites CSCS or F-gas experience - not essential Experience in working out on the road from a van or car Good customer relationship skills Flexible approach to working hours and days Experience in a Field Service Engineering or Technician role Electrical qualification, City & Guilds, NVQ etc Electrical knowledge