Commercial Gas Engineer / Plumber Coventry, West Midlands 23.00 per hour Permanent position A well-established and successful facilities management company based in Coventry are currently looking for a fully qualified Commercial Gas Engineer / Plumber to join their team on a permanent basis. Qualifications & Experience required: Gas Safe registered and relevant certifications including: CODNCC01 or COCN1, CIGA1 and CDGA1 Proven experience as a Commercial Gas Engineer ideally within a Facilities Management or Property / Buildings Maintenance environment Good technical knowledge and experience of working on commercial heating and hot and cold water systems etc. Knowledge of controls is desirable but not essential Excellent troubleshooting and problem-solving skills Commitment to safety and compliance with regulations Effective communication and customer service skills Full, clean driving licence CSCS Card Duties will include: Travelling to commercial sites across the Midlands and sometimes UK wide including schools, hospitals, office complexes etc. Undertaking a wide range of Plumbing and Gas tasks including maintenance, installations, repairs, servicing and fault finding etc. Undertaking further training when necessary, and keeping up to date with the UK gas regulations Keeping relevant job information up to date using tablet / laptop Communicating well with both customers and internal staff to keep everyone fully informed of job progress or issues found etc. Carrying out the job correctly, and on a right the first time basis, within a pre-determined timescale Skills or Personal Attributes welcomed: A passion for delivering high-quality services to a diverse range of customers Have a proactive approach to Plumbing and Gas maintenance and building management work Ability to read and understand instructions and app-based software The ability to work within a team and alone as required depending on the job at hand Have a confident, enthusiastic and pro-active attitude towards work Wanting to achieve success, for him/herself, the business, and the customers A flexible approach to work and working hours (within Working Directives) Additional Information: Working hours are: 40 per week (Monday - Friday 8:00am - 4:30pm with 30 mins lunch break) Work van / Van Share is available for business use only (no personal use) 28 Days holidays including Bank holidays to start A clean DBS check will be required as part of the offer process, and will be taken by the company If you are looking for your next challenge, in a permanent secure position, with a friendly and supportive company, then please get in touch for more information.
May 18, 2024
Full time
Commercial Gas Engineer / Plumber Coventry, West Midlands 23.00 per hour Permanent position A well-established and successful facilities management company based in Coventry are currently looking for a fully qualified Commercial Gas Engineer / Plumber to join their team on a permanent basis. Qualifications & Experience required: Gas Safe registered and relevant certifications including: CODNCC01 or COCN1, CIGA1 and CDGA1 Proven experience as a Commercial Gas Engineer ideally within a Facilities Management or Property / Buildings Maintenance environment Good technical knowledge and experience of working on commercial heating and hot and cold water systems etc. Knowledge of controls is desirable but not essential Excellent troubleshooting and problem-solving skills Commitment to safety and compliance with regulations Effective communication and customer service skills Full, clean driving licence CSCS Card Duties will include: Travelling to commercial sites across the Midlands and sometimes UK wide including schools, hospitals, office complexes etc. Undertaking a wide range of Plumbing and Gas tasks including maintenance, installations, repairs, servicing and fault finding etc. Undertaking further training when necessary, and keeping up to date with the UK gas regulations Keeping relevant job information up to date using tablet / laptop Communicating well with both customers and internal staff to keep everyone fully informed of job progress or issues found etc. Carrying out the job correctly, and on a right the first time basis, within a pre-determined timescale Skills or Personal Attributes welcomed: A passion for delivering high-quality services to a diverse range of customers Have a proactive approach to Plumbing and Gas maintenance and building management work Ability to read and understand instructions and app-based software The ability to work within a team and alone as required depending on the job at hand Have a confident, enthusiastic and pro-active attitude towards work Wanting to achieve success, for him/herself, the business, and the customers A flexible approach to work and working hours (within Working Directives) Additional Information: Working hours are: 40 per week (Monday - Friday 8:00am - 4:30pm with 30 mins lunch break) Work van / Van Share is available for business use only (no personal use) 28 Days holidays including Bank holidays to start A clean DBS check will be required as part of the offer process, and will be taken by the company If you are looking for your next challenge, in a permanent secure position, with a friendly and supportive company, then please get in touch for more information.
We're looking for a Gas Engineer to join our Housing Maintenance Team based in Gosport. Location : Gosport and surrounding areas Contract : Permanent, Full Time Salary: 33k Basic plus Option to participate in call-out rota on an agreed basis and Eligibility for inclusion in local Incentive Scheme following successful probation period What will you be responsible for? As a Gas Engineer, you'll be working within the Housing Maintenance Team, supporting them in providing a high quality, right first time service to their customers . Your day to day will include: Undertake gas servicing, repairs, testing, installation and maintenance work in a variety of contracts Carry out annual gas services to appliances in accordance to manufacturers and Gas Industry Standards Carry out the installation and commissioning of domestic appliances in accordance with industry standards & manufacturer's Instructions What are we looking for? This role of Gas Engineer is great for you if: Hold the relevant qualifications (i.e. NVQ Level 2/3 or equivalent, CCN1, CPA1, CEN1,HTR1, WAT1, CKR1) A good knowledge of diagnostics on domestic central heating boilers and repairs, also the installation of gas appliances and servicing. Familiarity with all trade related paperwork We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. Due to the nature of this role, you will also be required to complete a Basic Disclosure and Barring Service Check (applicants with criminal convictions will be treated on a case-by-case basis. We do not discriminate based on an applicant's criminal record or the details of any offences disclosed to us). Some roles may also be subject to further pre-employment checks. We look forward to seeing your application to join the
May 18, 2024
Full time
We're looking for a Gas Engineer to join our Housing Maintenance Team based in Gosport. Location : Gosport and surrounding areas Contract : Permanent, Full Time Salary: 33k Basic plus Option to participate in call-out rota on an agreed basis and Eligibility for inclusion in local Incentive Scheme following successful probation period What will you be responsible for? As a Gas Engineer, you'll be working within the Housing Maintenance Team, supporting them in providing a high quality, right first time service to their customers . Your day to day will include: Undertake gas servicing, repairs, testing, installation and maintenance work in a variety of contracts Carry out annual gas services to appliances in accordance to manufacturers and Gas Industry Standards Carry out the installation and commissioning of domestic appliances in accordance with industry standards & manufacturer's Instructions What are we looking for? This role of Gas Engineer is great for you if: Hold the relevant qualifications (i.e. NVQ Level 2/3 or equivalent, CCN1, CPA1, CEN1,HTR1, WAT1, CKR1) A good knowledge of diagnostics on domestic central heating boilers and repairs, also the installation of gas appliances and servicing. Familiarity with all trade related paperwork We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. Due to the nature of this role, you will also be required to complete a Basic Disclosure and Barring Service Check (applicants with criminal convictions will be treated on a case-by-case basis. We do not discriminate based on an applicant's criminal record or the details of any offences disclosed to us). Some roles may also be subject to further pre-employment checks. We look forward to seeing your application to join the
We're looking for a Gas Engineer to join our FM contract working across Wiltshire County Council sites. Location : On Site - Wiltshire Contract : Full Time, Permanent What will you be responsible for? As a Gas Engineer, you'll be working within the FM team, supporting them in commercial maintenance across the Wiltshire contract. Your day to day will include: Maintenance and reactive repair to gas equipment to current regulations, standards and manufacturer's instructions. Mechanical and electrical general maintenance may be required Quoted work repairs and light installation work on gas equipment across our network of sites You will be covering commercial public/council buildings of a variety of ages so some plumbing, heating, combustion, oil & gas systems tasks will be included What are we looking for? This role of Gas Engineer is great for you if: Commercial gas qualified in gas boilers, water heaters, tube heaters, gas air heaters, pipework, tightness testing and purging. COCN1; CENWAT1; CCP1; CDGA1; CORT1; TPCP1 Understand SFG20 and delivering of works to a timescale Preferred to have NVQ in Mechanical and/or electrical to backup gas qualifications. Full UK Driving licence as this is a mobile role We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. Due to the nature of this role, you will also be required to complete an Enhanced Disclosure and Barring Service Check (applicants with criminal convictions will be treated on a case-by-case basis. We do not discriminate based on an applicant's criminal record or the details of any offences disclosed to us). Some roles may also be subject to further pre-employment checks. We look forward to seeing your application to join the
May 18, 2024
Full time
We're looking for a Gas Engineer to join our FM contract working across Wiltshire County Council sites. Location : On Site - Wiltshire Contract : Full Time, Permanent What will you be responsible for? As a Gas Engineer, you'll be working within the FM team, supporting them in commercial maintenance across the Wiltshire contract. Your day to day will include: Maintenance and reactive repair to gas equipment to current regulations, standards and manufacturer's instructions. Mechanical and electrical general maintenance may be required Quoted work repairs and light installation work on gas equipment across our network of sites You will be covering commercial public/council buildings of a variety of ages so some plumbing, heating, combustion, oil & gas systems tasks will be included What are we looking for? This role of Gas Engineer is great for you if: Commercial gas qualified in gas boilers, water heaters, tube heaters, gas air heaters, pipework, tightness testing and purging. COCN1; CENWAT1; CCP1; CDGA1; CORT1; TPCP1 Understand SFG20 and delivering of works to a timescale Preferred to have NVQ in Mechanical and/or electrical to backup gas qualifications. Full UK Driving licence as this is a mobile role We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. Due to the nature of this role, you will also be required to complete an Enhanced Disclosure and Barring Service Check (applicants with criminal convictions will be treated on a case-by-case basis. We do not discriminate based on an applicant's criminal record or the details of any offences disclosed to us). Some roles may also be subject to further pre-employment checks. We look forward to seeing your application to join the
Our client a national renewable engergy provider are seeking a lead air source heat pump installer and also a service/maintenance engineer to work on domestic properties covering the Gloucestershire area, Heating Engineer/ Air source heat pump installer The company have been trading for over 15 years and are well established in the renewable energy field. The role will include installing: Air source heat pumps Hot Water cylinders Radiators Ideally you will have experience of general plumbing and heating work. If you also have any previous experience with installing or servicing air source heat pumps, that would be an advantage. A full UK driving licence is required, as you be travelling in a company vehicle. Qualifications NVQ/ C+G Plumbing & Heating Level 3 Heat Pump Installation (Advantageous) Gas Safe Registered (not essential) Benefits Competitive pay and great on target earnings Company pension scheme Health insurance Full time and part time/ sub contract options available
May 18, 2024
Full time
Our client a national renewable engergy provider are seeking a lead air source heat pump installer and also a service/maintenance engineer to work on domestic properties covering the Gloucestershire area, Heating Engineer/ Air source heat pump installer The company have been trading for over 15 years and are well established in the renewable energy field. The role will include installing: Air source heat pumps Hot Water cylinders Radiators Ideally you will have experience of general plumbing and heating work. If you also have any previous experience with installing or servicing air source heat pumps, that would be an advantage. A full UK driving licence is required, as you be travelling in a company vehicle. Qualifications NVQ/ C+G Plumbing & Heating Level 3 Heat Pump Installation (Advantageous) Gas Safe Registered (not essential) Benefits Competitive pay and great on target earnings Company pension scheme Health insurance Full time and part time/ sub contract options available
At 24/7 Home Rescue we have a fantastic opportunity where we are looking to recruit an experienced Gas Auditor to work on a full-time basis nationally. 24/7 Home Rescue's winning aspiration is to be recognised as the number one home assistance company, providing effortless customer service to 150,000 customers by 2025 through our people and technology. About the department The Compliance Teams winning aspiration is that 24/7 Home Rescue is recognised as a great place for customer service and excellence in gas safety. A place where the customer journey is effortless. Our field engineers are encouraged, engaged, and enabled to provide effortless customer service. Responsible for conducting audits on our inhouse and subcontractor engineer network. Ensuring that all work is conducted in a safe manner. The department is responsible for enforcing policies and planning programs to ensure the legal and ethical integrity of the company. Duties include ensuring that departments adhere to the rules and regulations that the company upholds, planning reports and discussing new rules and regulations with senior management. If you are qualified in the Domestic gas industry, care passionately about quality, and would relish a new challenge then apply now to become part of our expanding team of Gas Safety Inspectors. The successful candidate will be an excellent communicator with proven technical ability in the domestic gas sector and willing to have a 'hands on' approach to carrying out third party independent quality audits. Principle accountabilities: Undertake a predetermined number of audits in an agreed period Assess others work for safety and compliance against industry legislative requirements and best practice Work within a given region and willingness to undertake occasional travel out of their given region but within the U.K. Attending meetings to present findings Dealing with technical enquiries Complying with company policies and procedures Inputting findings using Home Response 360 Ltd digital platform You will be a role model for our values and behaviours: Lead by example Be proactive, supportive, and collaborative. Have a positive attitude to work and to your colleagues. Be open and honest with strong morale principals. Be respectful, showing consideration and regard for others. Embrace change and new ways of working. Look for development opportunities and new experiences. Work collaboratively with colleagues, sharing knowledge and expertise. Build strong relationships with colleagues and stakeholders across the business. Value the experience and opinions of others. Essential Requirements: Experience of working within the gas industry with a detailed knowledge of domestic gas installations Relevant ACS qualifications (CCN1, CENWAT, HTR1, CKR1 Unvented) Willing to have a hands-on approach to carrying out third-party safety and quality audits Up to date knowledge of gas safety and legislation and industry standards Excellent communication and relationship building skills. Willing to travel around a given region Full UK Driving license. Desirable but not essential as full training to our high standards will be provided: A1, A2 assessor (D32,33) assessor qualification - desirable but not essential as training will be provided NVQ level 3, City & Guilds in Gas Installation and Commercial qualifications Experience of working within the compliance sector What's in it for you? Attractive salary package Perfectly timed hire, well positioned for an ambitious individual to grow with the company. A genuine, attentive, and open employer Exciting environment Modern office
May 18, 2024
Full time
At 24/7 Home Rescue we have a fantastic opportunity where we are looking to recruit an experienced Gas Auditor to work on a full-time basis nationally. 24/7 Home Rescue's winning aspiration is to be recognised as the number one home assistance company, providing effortless customer service to 150,000 customers by 2025 through our people and technology. About the department The Compliance Teams winning aspiration is that 24/7 Home Rescue is recognised as a great place for customer service and excellence in gas safety. A place where the customer journey is effortless. Our field engineers are encouraged, engaged, and enabled to provide effortless customer service. Responsible for conducting audits on our inhouse and subcontractor engineer network. Ensuring that all work is conducted in a safe manner. The department is responsible for enforcing policies and planning programs to ensure the legal and ethical integrity of the company. Duties include ensuring that departments adhere to the rules and regulations that the company upholds, planning reports and discussing new rules and regulations with senior management. If you are qualified in the Domestic gas industry, care passionately about quality, and would relish a new challenge then apply now to become part of our expanding team of Gas Safety Inspectors. The successful candidate will be an excellent communicator with proven technical ability in the domestic gas sector and willing to have a 'hands on' approach to carrying out third party independent quality audits. Principle accountabilities: Undertake a predetermined number of audits in an agreed period Assess others work for safety and compliance against industry legislative requirements and best practice Work within a given region and willingness to undertake occasional travel out of their given region but within the U.K. Attending meetings to present findings Dealing with technical enquiries Complying with company policies and procedures Inputting findings using Home Response 360 Ltd digital platform You will be a role model for our values and behaviours: Lead by example Be proactive, supportive, and collaborative. Have a positive attitude to work and to your colleagues. Be open and honest with strong morale principals. Be respectful, showing consideration and regard for others. Embrace change and new ways of working. Look for development opportunities and new experiences. Work collaboratively with colleagues, sharing knowledge and expertise. Build strong relationships with colleagues and stakeholders across the business. Value the experience and opinions of others. Essential Requirements: Experience of working within the gas industry with a detailed knowledge of domestic gas installations Relevant ACS qualifications (CCN1, CENWAT, HTR1, CKR1 Unvented) Willing to have a hands-on approach to carrying out third-party safety and quality audits Up to date knowledge of gas safety and legislation and industry standards Excellent communication and relationship building skills. Willing to travel around a given region Full UK Driving license. Desirable but not essential as full training to our high standards will be provided: A1, A2 assessor (D32,33) assessor qualification - desirable but not essential as training will be provided NVQ level 3, City & Guilds in Gas Installation and Commercial qualifications Experience of working within the compliance sector What's in it for you? Attractive salary package Perfectly timed hire, well positioned for an ambitious individual to grow with the company. A genuine, attentive, and open employer Exciting environment Modern office
Reporting directly to the Supply Chain Manager this role will be based in Norwich and work closely with our Group Supply Chain department in Paris. The successful candidate will provide an effective and economic service to both Offshore Installations and our Onshore Terminals at Bacton & Dimlington. You will need to demonstrate flexibility in your approach, adherence to Group values and provide attention to detail in your work to proactively find solutions to Operational needs. This is a staff position working Monday to Friday, based in our Norwich office, however the role may require periodic travel to other locations. Key Responsibilities Include: â Work closely with the Supply Chain Manager and ensure his role during their absence. â Adopt and implement the Group Supply Chain policies and values. â Collaborate with other departments to identify and maintain resources needed to establish and provide an effective supply chain. â Reviewing and updating supply chain practices in line with company/Group policies, standards, laws and regulations and oversight of any subsequent changes to the process. â Implementing logistic strategies, tracking goods from the origination point to the warehouse. â Develop and maintain detailed inventories of materials and supplies located at warehouses. â Analysing the supply chain data and solving any issues or putting alternative plans in place. â Evaluate and report on KPIs. â Negotiating terms and prices with suppliers, monitoring, and assessing their performance and maintaining cost-effective practices. â Commercial awareness and understanding of terms and conditions and contracting strategies. â Benchmark and negotiate complex goods and services requests in compliance with Site requirements and QSHE policies. â Improve the overall supply chain performance and look for any possible innovations to the process. â Manage and motivate a team of supply chain staff. â Enforce strict adherence to safety standards, supervise the monthly warehouse QHSE meeting. â Perform other related duties as assigned. Supervisory Specific Responsibilities: â Oversee the daily workflow and schedule of the department. â Manage and motivate a team of supply chain staff (Appraisal, Annual leave etc). â Monitor the performance of the supply chain team. Key Skills & Experience Required: â Good communication and Interpersonal skills. â Relationship management skills and active listening. â Complex problem-solving skills. â Strong planning skills. â Comfort with leading and training employees. â An understanding of Microsoft Office packages such as Excel, Word and PowerPoint, Teams. â Working knowledge of SAP MM. â Excellent time management skills and the ability to work under pressure while maintaining accuracy. â Strategic planning and thinking, systems analysis and evaluation. â Previous Oil & Gas experience would be an advantage. â MCIPS desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
May 18, 2024
Full time
Reporting directly to the Supply Chain Manager this role will be based in Norwich and work closely with our Group Supply Chain department in Paris. The successful candidate will provide an effective and economic service to both Offshore Installations and our Onshore Terminals at Bacton & Dimlington. You will need to demonstrate flexibility in your approach, adherence to Group values and provide attention to detail in your work to proactively find solutions to Operational needs. This is a staff position working Monday to Friday, based in our Norwich office, however the role may require periodic travel to other locations. Key Responsibilities Include: â Work closely with the Supply Chain Manager and ensure his role during their absence. â Adopt and implement the Group Supply Chain policies and values. â Collaborate with other departments to identify and maintain resources needed to establish and provide an effective supply chain. â Reviewing and updating supply chain practices in line with company/Group policies, standards, laws and regulations and oversight of any subsequent changes to the process. â Implementing logistic strategies, tracking goods from the origination point to the warehouse. â Develop and maintain detailed inventories of materials and supplies located at warehouses. â Analysing the supply chain data and solving any issues or putting alternative plans in place. â Evaluate and report on KPIs. â Negotiating terms and prices with suppliers, monitoring, and assessing their performance and maintaining cost-effective practices. â Commercial awareness and understanding of terms and conditions and contracting strategies. â Benchmark and negotiate complex goods and services requests in compliance with Site requirements and QSHE policies. â Improve the overall supply chain performance and look for any possible innovations to the process. â Manage and motivate a team of supply chain staff. â Enforce strict adherence to safety standards, supervise the monthly warehouse QHSE meeting. â Perform other related duties as assigned. Supervisory Specific Responsibilities: â Oversee the daily workflow and schedule of the department. â Manage and motivate a team of supply chain staff (Appraisal, Annual leave etc). â Monitor the performance of the supply chain team. Key Skills & Experience Required: â Good communication and Interpersonal skills. â Relationship management skills and active listening. â Complex problem-solving skills. â Strong planning skills. â Comfort with leading and training employees. â An understanding of Microsoft Office packages such as Excel, Word and PowerPoint, Teams. â Working knowledge of SAP MM. â Excellent time management skills and the ability to work under pressure while maintaining accuracy. â Strategic planning and thinking, systems analysis and evaluation. â Previous Oil & Gas experience would be an advantage. â MCIPS desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Gloucester City Homes (GCH) is an ambitious, dynamic housing association with strong community roots. We are focused on building homes and communities where people can thrive and delivering valued services to our customers. We re now seeking a Compliance Coordinator someone to take accountability for organizing the delivery of GCH s Gas and Heating compliance checks, annual servicing, routine & emergency repairs and installations, in accordance with Gas Safety (Installations and Use) Regulations 1998 and other heating regulations. On behalf of the Property directorate, you ll be the central point and lead for access issues and in support of all areas of compliance to ensure we meet our Landlord Health and Safety responsibilities. You will be responsible for the day-to-day organisation of the annual gas servicing diary, service records and administration for a team of directly employed Engineers and external contractors and enable the delivery of a robust maintenance, servicing, and installation service to GCH s property portfolio. You will collate, store and record LGSR s and other heating reports from the internal team, external contractors, and auditing contractors, and work closely with the Compliance Manager and Gas Supervisor to ensure that all legal obligations in respect of Gas Safety are met. This is a hybrid role working 2 days per week in our office in Gloucester and 3 days per week at home. We d like you to Have experience of monitoring performance and productivity of teams and individuals. Have experience of delivering excellent customer service, identifying and solving problems. Have experience of engaging with vulnerable people. Have knowledge of gas and heating regulations and working practices. Have knowledge and experience of compliance around the big six elements (Gas, Electrical, Fire, Lifts, Asbestos and Legionella). Be competent with IT systems to gather, store and process information. Be experienced working with field based Engineers and contractors. Closing Date: 14th June 2024 GCH reserve the right to bring the closing date forward should enough quality applications be received prior to the current closing date. GCH is committed to equal opportunities. We actively encourage applications from all sections of our community, particularly those with lived experience of our work. We celebrate the diverse nature of our customers and colleagues, striving to develop diverse teams where everyone can be their authentic self through an inclusive, family friendly, flexible and fun culture. Our values of pride, quality, integrity and innovation are at the heart of what we do. So if this sounds like you, we d be delighted to hear from you!
May 18, 2024
Full time
Gloucester City Homes (GCH) is an ambitious, dynamic housing association with strong community roots. We are focused on building homes and communities where people can thrive and delivering valued services to our customers. We re now seeking a Compliance Coordinator someone to take accountability for organizing the delivery of GCH s Gas and Heating compliance checks, annual servicing, routine & emergency repairs and installations, in accordance with Gas Safety (Installations and Use) Regulations 1998 and other heating regulations. On behalf of the Property directorate, you ll be the central point and lead for access issues and in support of all areas of compliance to ensure we meet our Landlord Health and Safety responsibilities. You will be responsible for the day-to-day organisation of the annual gas servicing diary, service records and administration for a team of directly employed Engineers and external contractors and enable the delivery of a robust maintenance, servicing, and installation service to GCH s property portfolio. You will collate, store and record LGSR s and other heating reports from the internal team, external contractors, and auditing contractors, and work closely with the Compliance Manager and Gas Supervisor to ensure that all legal obligations in respect of Gas Safety are met. This is a hybrid role working 2 days per week in our office in Gloucester and 3 days per week at home. We d like you to Have experience of monitoring performance and productivity of teams and individuals. Have experience of delivering excellent customer service, identifying and solving problems. Have experience of engaging with vulnerable people. Have knowledge of gas and heating regulations and working practices. Have knowledge and experience of compliance around the big six elements (Gas, Electrical, Fire, Lifts, Asbestos and Legionella). Be competent with IT systems to gather, store and process information. Be experienced working with field based Engineers and contractors. Closing Date: 14th June 2024 GCH reserve the right to bring the closing date forward should enough quality applications be received prior to the current closing date. GCH is committed to equal opportunities. We actively encourage applications from all sections of our community, particularly those with lived experience of our work. We celebrate the diverse nature of our customers and colleagues, striving to develop diverse teams where everyone can be their authentic self through an inclusive, family friendly, flexible and fun culture. Our values of pride, quality, integrity and innovation are at the heart of what we do. So if this sounds like you, we d be delighted to hear from you!
Description: Job Title: Principal Mechanical/ Mechatronics Engineer Location: Centred around London, various UK sites, international opportunities, flexible trust based work policy. Salary: £74 - 90k PA depending on experience Full Time/Part Time: Full Time + Employee Share Option Scheme + Above industry standard holiday (30 days vs 22-25) + Close office over Xmas where possible + £500 personal development grant every year + Fully funded training and professional development opportunities + Unlimited mental health support + 3 months of equal Paternity or Maternity leave + Monthly rewilding donation on your behalf + Cycle to Work scheme About Mission Zero Technologies: MZT is a hardware technology start-up pioneering a breakthrough Direct Air carbon Capture (DAC) technology that can scrub CO2 from the air using a fraction of the energy compared to incumbent technologies developed by the likes of Carbon Engineering and Climeworks. In the past three years, MZT has evolved its technology from concept to pilot plant scale, successfully raising over £8m from a mixture of private and government funding. MZT's technology is a hybrid of approaches, combining efficient solution-phase capture of CO2 with a continuous and compact electrochemical separation technology. Mission Zero's work is guided by our principles of bold curiosity, problem solving acumen and hope for the future. We strive to realise a world where humanity has new tools to fight climate change, permanently remove CO2 from the atmosphere and produce everyday products such as concrete blocks or fuels from atmospheric carbon emissions. To do this we need to realise a decentralised Gigaton supply chain for CO2 sourced directly from the atmosphere. The opportunity: You have the opportunity to join MZT at a pivotal point in our company's history - our transition from an early-stage R&D startup into a product offering, revenue-generating company poised to rapidly scale our direct-air capture technology across the world. MZT is hiring a Principal Mechanical / Mechatronics Engineer, with skills focused on design and delivery of novel machines or system through all stages of the product life cycle - ideally ina chemical industry context. In this role you will finalise design and deliver our first technology deployments at industrial scale. Inheriting MZT product modules designed and built by our historically process engineering focused delivery team and our engineering partners, you will ensure the effective deployment, hook-up and interfacing with host sites. You will be a key member of the Delivery team, shepherding the product definition through final electro-mechanical detailed design toward site deployment at scales of 250 teCO2/year capacity at our Norfolk site up to 5,000 teCO2/year and beyond over the coming years. This will require you to apply experience in product delivery while interfacing with multiple stakeholders internally and externally. The role will be centred around our headquarters in East-Central London, but with periodic day/week assignments to our various emerging UK sites, European suppliers and further international sites in the medium to long term as we expand the business globally. Our vision for our early stage employees is that they own the business with us (literally), grow it with us and become part of the collective story of Mission Zero, taking a catalytic role in its early history and the fight against climate change. What you'll be responsible for: Leading, guiding, reviewing and developing safe electro-mechanical designs internally and with external contractors across numerous MZT projects from 50 te/year research units to 5,000 te/year scale up projects and beyond. Specification, delegation, delivery and review of all required mechanical, electrical, and relevant interdisciplinary design deliverables. Interfacing with all key external vendors for mechanical and electrical packages, especially fabricators and site hosts. Supporting project management team in technical delivery of detailed plant design and analysis for pilot and commercial systems, especially in respect of mechanical and electrical requirements including packaging philosophy and in the interfaces between contractor team engineering disciplines. Applying fundamental engineering knowledge to ensure suitable vendor boundaries are defined with the opportunity to optimise plant and product performance as MZT scales rapidly in the DAC space. Working closely at the mechanical-electrical-control interface, developing, broadening and consolidating control engineering capacity across the company. Expert understanding of EC&I scopes of work including FDS, control panel specification, software programming interfaces, proven record interfacing, practising or leading EC&I engineering. The Ideal Candidate will possess: 10 years minimum industrial experience delivering projects with significant mechanical and electrical design content across multiple industries. MEng Engineering Degree with Mechanical and/or Electrical focus or suitable discipline. Experience and understanding of the full machine/product development cycle (Conceptualisation, design, delivery/commissioning and decommissioning), Ability to use 3D CAD Modelling Software with a PLM system, (SOLIDWORKS & 3DEXPERIENCE preferred) A passion for developing technical solutions for the world's greatest challenges. Evidenced strong practical skills, comfortable with both hands-on work and desk-based tasks. Comfortable working with ambiguity. Expert understanding of mechanical packaging philosophy and procurement. Ability to design and critically evaluate GAs (General Arrangement Drawings), 3D models, P&IDs for vendor scope splits on paper and live plant scales especially from electrical and mechanical perspective. Good understanding of hazard and risk identification especially relating to e.g. PUWER, Machinery Directive, CE / UKCA marking. Appreciation of good design for minimal maintenance approaches. Experience in HAZID, HAZOP, SIL, LOPA & FMEA. Demonstrated understanding of hazard and risk identification especially from control & electrical rating perspective. Breadth of exposure to process unit operations and mechanical packaged systems extending to MV electrical installations and transformer packages Mechanical / electrical inter-discipline specialism in undergraduate / postgraduate studies. Chartered engineering status with IMechE, IEEE, IET or equivalent. Deep understanding of materials in the context of chemical and weathering resistance. Demonstrated experience working with electrodialysis / electrolytic processes and/or absorption, scrubbing, continuous gas-liquid systems, compression, liquefaction. Experience designing, running and supporting research scale, pilots and/or commercial plants. Experience with engineering supply chain management. Basic understanding of fundamental electrochemistry principles and background industrial chemistry knowledge. Familiarity with processes handling CO2. Formal training / qualifications in e.g. machine safety / CMSE. Job Ref: MZT-EngIV-Mech Start Date: 01/02/2024 Hours: Full Time
May 17, 2024
Full time
Description: Job Title: Principal Mechanical/ Mechatronics Engineer Location: Centred around London, various UK sites, international opportunities, flexible trust based work policy. Salary: £74 - 90k PA depending on experience Full Time/Part Time: Full Time + Employee Share Option Scheme + Above industry standard holiday (30 days vs 22-25) + Close office over Xmas where possible + £500 personal development grant every year + Fully funded training and professional development opportunities + Unlimited mental health support + 3 months of equal Paternity or Maternity leave + Monthly rewilding donation on your behalf + Cycle to Work scheme About Mission Zero Technologies: MZT is a hardware technology start-up pioneering a breakthrough Direct Air carbon Capture (DAC) technology that can scrub CO2 from the air using a fraction of the energy compared to incumbent technologies developed by the likes of Carbon Engineering and Climeworks. In the past three years, MZT has evolved its technology from concept to pilot plant scale, successfully raising over £8m from a mixture of private and government funding. MZT's technology is a hybrid of approaches, combining efficient solution-phase capture of CO2 with a continuous and compact electrochemical separation technology. Mission Zero's work is guided by our principles of bold curiosity, problem solving acumen and hope for the future. We strive to realise a world where humanity has new tools to fight climate change, permanently remove CO2 from the atmosphere and produce everyday products such as concrete blocks or fuels from atmospheric carbon emissions. To do this we need to realise a decentralised Gigaton supply chain for CO2 sourced directly from the atmosphere. The opportunity: You have the opportunity to join MZT at a pivotal point in our company's history - our transition from an early-stage R&D startup into a product offering, revenue-generating company poised to rapidly scale our direct-air capture technology across the world. MZT is hiring a Principal Mechanical / Mechatronics Engineer, with skills focused on design and delivery of novel machines or system through all stages of the product life cycle - ideally ina chemical industry context. In this role you will finalise design and deliver our first technology deployments at industrial scale. Inheriting MZT product modules designed and built by our historically process engineering focused delivery team and our engineering partners, you will ensure the effective deployment, hook-up and interfacing with host sites. You will be a key member of the Delivery team, shepherding the product definition through final electro-mechanical detailed design toward site deployment at scales of 250 teCO2/year capacity at our Norfolk site up to 5,000 teCO2/year and beyond over the coming years. This will require you to apply experience in product delivery while interfacing with multiple stakeholders internally and externally. The role will be centred around our headquarters in East-Central London, but with periodic day/week assignments to our various emerging UK sites, European suppliers and further international sites in the medium to long term as we expand the business globally. Our vision for our early stage employees is that they own the business with us (literally), grow it with us and become part of the collective story of Mission Zero, taking a catalytic role in its early history and the fight against climate change. What you'll be responsible for: Leading, guiding, reviewing and developing safe electro-mechanical designs internally and with external contractors across numerous MZT projects from 50 te/year research units to 5,000 te/year scale up projects and beyond. Specification, delegation, delivery and review of all required mechanical, electrical, and relevant interdisciplinary design deliverables. Interfacing with all key external vendors for mechanical and electrical packages, especially fabricators and site hosts. Supporting project management team in technical delivery of detailed plant design and analysis for pilot and commercial systems, especially in respect of mechanical and electrical requirements including packaging philosophy and in the interfaces between contractor team engineering disciplines. Applying fundamental engineering knowledge to ensure suitable vendor boundaries are defined with the opportunity to optimise plant and product performance as MZT scales rapidly in the DAC space. Working closely at the mechanical-electrical-control interface, developing, broadening and consolidating control engineering capacity across the company. Expert understanding of EC&I scopes of work including FDS, control panel specification, software programming interfaces, proven record interfacing, practising or leading EC&I engineering. The Ideal Candidate will possess: 10 years minimum industrial experience delivering projects with significant mechanical and electrical design content across multiple industries. MEng Engineering Degree with Mechanical and/or Electrical focus or suitable discipline. Experience and understanding of the full machine/product development cycle (Conceptualisation, design, delivery/commissioning and decommissioning), Ability to use 3D CAD Modelling Software with a PLM system, (SOLIDWORKS & 3DEXPERIENCE preferred) A passion for developing technical solutions for the world's greatest challenges. Evidenced strong practical skills, comfortable with both hands-on work and desk-based tasks. Comfortable working with ambiguity. Expert understanding of mechanical packaging philosophy and procurement. Ability to design and critically evaluate GAs (General Arrangement Drawings), 3D models, P&IDs for vendor scope splits on paper and live plant scales especially from electrical and mechanical perspective. Good understanding of hazard and risk identification especially relating to e.g. PUWER, Machinery Directive, CE / UKCA marking. Appreciation of good design for minimal maintenance approaches. Experience in HAZID, HAZOP, SIL, LOPA & FMEA. Demonstrated understanding of hazard and risk identification especially from control & electrical rating perspective. Breadth of exposure to process unit operations and mechanical packaged systems extending to MV electrical installations and transformer packages Mechanical / electrical inter-discipline specialism in undergraduate / postgraduate studies. Chartered engineering status with IMechE, IEEE, IET or equivalent. Deep understanding of materials in the context of chemical and weathering resistance. Demonstrated experience working with electrodialysis / electrolytic processes and/or absorption, scrubbing, continuous gas-liquid systems, compression, liquefaction. Experience designing, running and supporting research scale, pilots and/or commercial plants. Experience with engineering supply chain management. Basic understanding of fundamental electrochemistry principles and background industrial chemistry knowledge. Familiarity with processes handling CO2. Formal training / qualifications in e.g. machine safety / CMSE. Job Ref: MZT-EngIV-Mech Start Date: 01/02/2024 Hours: Full Time
Position Maintenance Planner Salary Up to £27,500 per annum. Location Northwest London Working Hours Monday-Friday 8:00am-5:00pm Reporting Into Engineering Manager Tecrec are currently searching for an experienced Maintenance Planner to work for a business who is a rapidly expanding, London-based SME delivering mechanical and electrical services for both the public and private sector. They provide a variety of services from one off installations and servicing to capital investment schemes and planed preventative maintenance programs with an emergency call out service 24 hours a day, 365 days of the year. The Planner will plan and manage engineers and sub-contractors workload/diaries, control the works allocation from pre-arranged programmes and make further appointments for any follow on works. There will be several variables throughout the day that will have to be taken into consideration. There might be a need to issue alternative engineers with further appointments and/or re-plan a job for later time/date, possibly organising additional labour to attend and assist with the works, based on capacity and location or time constraints of completing other major works. Responsibilities The primary role is to ensure that the appointments are completed on time during the day. Any jobs re-arranged for another day must have been authorised by the manager, with the notes fully updated and emails sent to confirm. Ensure that completed PPM tasks comply with statutory and regulatory compliance. Planning the engineers and sub-contractor daily routines and deploying orders/ jobs for attendance. Managing the engineers time throughout the day and prioritising critical works. Updating job statuses. You will update the status of all works orders to completion including client systems and regularly report as to the productivity of the engineers throughout the day. Knowledge The role requires good knowledge of building maintenance services/engineering associated with repairs and installation works, as well as experience within social housing contracts and construction or building services industry. Full understanding and knowledge of responsive repair contracts. Working knowledge of H&S legislation, regulations and ACOPs. Full and sound knowledge of gas distribution and heating system within a domestic setting. Good understanding of contract management and specifications Would you be interested in discussing further? If so, please get in touch for more details!
May 17, 2024
Full time
Position Maintenance Planner Salary Up to £27,500 per annum. Location Northwest London Working Hours Monday-Friday 8:00am-5:00pm Reporting Into Engineering Manager Tecrec are currently searching for an experienced Maintenance Planner to work for a business who is a rapidly expanding, London-based SME delivering mechanical and electrical services for both the public and private sector. They provide a variety of services from one off installations and servicing to capital investment schemes and planed preventative maintenance programs with an emergency call out service 24 hours a day, 365 days of the year. The Planner will plan and manage engineers and sub-contractors workload/diaries, control the works allocation from pre-arranged programmes and make further appointments for any follow on works. There will be several variables throughout the day that will have to be taken into consideration. There might be a need to issue alternative engineers with further appointments and/or re-plan a job for later time/date, possibly organising additional labour to attend and assist with the works, based on capacity and location or time constraints of completing other major works. Responsibilities The primary role is to ensure that the appointments are completed on time during the day. Any jobs re-arranged for another day must have been authorised by the manager, with the notes fully updated and emails sent to confirm. Ensure that completed PPM tasks comply with statutory and regulatory compliance. Planning the engineers and sub-contractor daily routines and deploying orders/ jobs for attendance. Managing the engineers time throughout the day and prioritising critical works. Updating job statuses. You will update the status of all works orders to completion including client systems and regularly report as to the productivity of the engineers throughout the day. Knowledge The role requires good knowledge of building maintenance services/engineering associated with repairs and installation works, as well as experience within social housing contracts and construction or building services industry. Full understanding and knowledge of responsive repair contracts. Working knowledge of H&S legislation, regulations and ACOPs. Full and sound knowledge of gas distribution and heating system within a domestic setting. Good understanding of contract management and specifications Would you be interested in discussing further? If so, please get in touch for more details!
We are looking for an experienced Ground Support Equipment (GSE) Test Technician. As a GSE Test Technician, you will be responsible for various tasks including hot fire testing of apogee engines, instrumentation of engines, and maintaining and upgrading the firing site. Key Responsibilities: Conduct hot fire testing of apogee engines. Instrument engines and maintain firing site. Support lead Test Engineers for site preparation and maintenance. Handle propellant sampling, analysis, and testing. Maintain and operate mechanical and steam vacuum systems. Calibrate instrumentation and conduct steam boiler maintenance. Work with and handle flight hardware, including preparation of customer flight engines for test, instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities. Requirements: Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field. Previous experience in GSE testing and chemical analysis of propellants. Proficiency in writing reports and test procedures. Familiarity with hot fire testing, propellant handling, and pressure systems checks. Experience with aerospace clean rooms and fuelling operations. Ability to interpret Piping and Instrumentation Diagrams (P&IDs). Strong understanding of high-pressure gas and fluidic systems.
May 17, 2024
Full time
We are looking for an experienced Ground Support Equipment (GSE) Test Technician. As a GSE Test Technician, you will be responsible for various tasks including hot fire testing of apogee engines, instrumentation of engines, and maintaining and upgrading the firing site. Key Responsibilities: Conduct hot fire testing of apogee engines. Instrument engines and maintain firing site. Support lead Test Engineers for site preparation and maintenance. Handle propellant sampling, analysis, and testing. Maintain and operate mechanical and steam vacuum systems. Calibrate instrumentation and conduct steam boiler maintenance. Work with and handle flight hardware, including preparation of customer flight engines for test, instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities. Requirements: Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field. Previous experience in GSE testing and chemical analysis of propellants. Proficiency in writing reports and test procedures. Familiarity with hot fire testing, propellant handling, and pressure systems checks. Experience with aerospace clean rooms and fuelling operations. Ability to interpret Piping and Instrumentation Diagrams (P&IDs). Strong understanding of high-pressure gas and fluidic systems.
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
May 17, 2024
Full time
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
May 17, 2024
Full time
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
ABOUT THE ROLE At DSV we're looking for future Founders, entrepreneurially minded individuals with industry-specific technical and commercial domain expertise eager to solve urgent unmet challenges through venture building. You will join DSV's venture creation programme as a Founder in Residence and work closely with the DSV team, using our methodology , to lead the spin-out of a new company. During the programme, you'll work on all aspects related to venture creation in this opportunity area, including working out the optimal approach to solve for the desired outcome, building a team and building a viable business case. Once the new venture is incorporated with pre-seed investment from DSV, you and your co-founders will own the majority stake in the business and continue receiving support from the DSV team post-spinout. THE OPPORTUNITY AREA Addressing the manufacturing needs of cement, steel, chemicals, aluminium, fertiliser, pulp & paper, glass, and industrially-produced food and drinks depends delivering huge quantities of heat to dozens of manufacturing processes. To supply so-called "process heat" to these processes, such as drying, fermenting, melting, boiling, steaming or curing etc, currently requires burning billions of tonnes of fossil fuels generating 7.5 Gt/yr of emissions. Currently as much as 35% of these emissions are created from processes that occur below 120 C, a temperature that is economical to electrify via heat pumps. Reducing these emissions in the immediate term (7 - 10 years) would allow humanity to stay on track for Net Zero by 2050. OUR APPROACH Converting our current fossil fuel usage to renewable energy through electrification of heating sources is already underway in some production settings, but progress is stifled by extremely challenging economics. Even at 100% heater efficiency, in the USA, operating costs for direct electrification (e.g. electric boilers) using grid electricity are 5 times higher than existing natural gas systems and in Europe the operating costs are double even today. The only device capable of bridging this OPEX gap is industrial-scale heat pumps. Despite this, the capital cost of heat pumps must fall by 10 times to a similar cost as fridge compressors and internal combustion engines, and installation costs by 2 - 3 times before they can become competitive with existing natural gas powered heating. We aim to achieve this cost reduction by selling a fully-integrated, modular heat pump solution. We are looking for a commercially-minded founder with the following traits and background: Previously led or managed commercial aspects of an innovative engineering, industrial, or hardware technology venture Broad understanding of technical product development and R&D commercialisation Has experience in end-to-end sales, from generating sales leads to closing commercial and/or development agreements Desire to work on very large scale problems Motivated to make a significant impact on climate change Bonus requirements Familiarity working in one or multiple of the following industries: Food & Beverage ingredients manufacturing, Paper & Pulp making or Non-metallic minerals manufacture Sold turnkey industrial equipment for manufacturing use and operation Has high level of structure, organisation and discipline By joining DSV, you'll be joining a team of operators who have founded companies and led translation of science at some of the most respected universities, charities, funds and government agencies. 2/3 of the team have founded or led a company at C-suite and 65% have a PhD. Our team dedicate several hours every week to each Founder or founding team to provide tailored guidance, resources and feedback covering every aspect of what it takes to successfully launch a new venture from both the tech and commercial perspectives: We provide optimised, purpose-built, proprietary tools, resources and processes to help create high-impact ventures from scratch, using our venture creation methodology. Read more about one of our key tools here. We draw on opportunity area specific know-how provided by our network of Partners and Advisors; We provide £250k investment governed by our Investment Committee to incorporate the new venture and develop early proof-of-concept data that's needed to attract high profile non-venture studio VCs. This funding is also key to get grant funding, which most often needs to be matched with private investment; We provide guaranteed income of £4,166 per month paid to each Founder in Residence as a consultancy fee until the company is launched and the pre-seed investment is secured; You and your co-founders will own a majority equity stake in the company; We provide continuous support after post spin-out, including fundraising, commercial partnerships, recruitment and team-building (amongst other things); plus There are dozens of Founders currently at DSV across sectors working collaboratively and supporting one another - a unique resource to draw on. ABOUT DSV Deep Science Ventures is creating a future in which both humans and the planet can thrive. We use our unique venture creation process to create, spin-out and invest into science companies, combining available scientific knowledge and founder-type scientists into high-impact ventures. We operate in 4 sectors: Pharmaceuticals, Climate, Agriculture and Computation, tackling the challenges defining those areas by taking a first principles approach and partnering with leading institutions.
May 17, 2024
Full time
ABOUT THE ROLE At DSV we're looking for future Founders, entrepreneurially minded individuals with industry-specific technical and commercial domain expertise eager to solve urgent unmet challenges through venture building. You will join DSV's venture creation programme as a Founder in Residence and work closely with the DSV team, using our methodology , to lead the spin-out of a new company. During the programme, you'll work on all aspects related to venture creation in this opportunity area, including working out the optimal approach to solve for the desired outcome, building a team and building a viable business case. Once the new venture is incorporated with pre-seed investment from DSV, you and your co-founders will own the majority stake in the business and continue receiving support from the DSV team post-spinout. THE OPPORTUNITY AREA Addressing the manufacturing needs of cement, steel, chemicals, aluminium, fertiliser, pulp & paper, glass, and industrially-produced food and drinks depends delivering huge quantities of heat to dozens of manufacturing processes. To supply so-called "process heat" to these processes, such as drying, fermenting, melting, boiling, steaming or curing etc, currently requires burning billions of tonnes of fossil fuels generating 7.5 Gt/yr of emissions. Currently as much as 35% of these emissions are created from processes that occur below 120 C, a temperature that is economical to electrify via heat pumps. Reducing these emissions in the immediate term (7 - 10 years) would allow humanity to stay on track for Net Zero by 2050. OUR APPROACH Converting our current fossil fuel usage to renewable energy through electrification of heating sources is already underway in some production settings, but progress is stifled by extremely challenging economics. Even at 100% heater efficiency, in the USA, operating costs for direct electrification (e.g. electric boilers) using grid electricity are 5 times higher than existing natural gas systems and in Europe the operating costs are double even today. The only device capable of bridging this OPEX gap is industrial-scale heat pumps. Despite this, the capital cost of heat pumps must fall by 10 times to a similar cost as fridge compressors and internal combustion engines, and installation costs by 2 - 3 times before they can become competitive with existing natural gas powered heating. We aim to achieve this cost reduction by selling a fully-integrated, modular heat pump solution. We are looking for a commercially-minded founder with the following traits and background: Previously led or managed commercial aspects of an innovative engineering, industrial, or hardware technology venture Broad understanding of technical product development and R&D commercialisation Has experience in end-to-end sales, from generating sales leads to closing commercial and/or development agreements Desire to work on very large scale problems Motivated to make a significant impact on climate change Bonus requirements Familiarity working in one or multiple of the following industries: Food & Beverage ingredients manufacturing, Paper & Pulp making or Non-metallic minerals manufacture Sold turnkey industrial equipment for manufacturing use and operation Has high level of structure, organisation and discipline By joining DSV, you'll be joining a team of operators who have founded companies and led translation of science at some of the most respected universities, charities, funds and government agencies. 2/3 of the team have founded or led a company at C-suite and 65% have a PhD. Our team dedicate several hours every week to each Founder or founding team to provide tailored guidance, resources and feedback covering every aspect of what it takes to successfully launch a new venture from both the tech and commercial perspectives: We provide optimised, purpose-built, proprietary tools, resources and processes to help create high-impact ventures from scratch, using our venture creation methodology. Read more about one of our key tools here. We draw on opportunity area specific know-how provided by our network of Partners and Advisors; We provide £250k investment governed by our Investment Committee to incorporate the new venture and develop early proof-of-concept data that's needed to attract high profile non-venture studio VCs. This funding is also key to get grant funding, which most often needs to be matched with private investment; We provide guaranteed income of £4,166 per month paid to each Founder in Residence as a consultancy fee until the company is launched and the pre-seed investment is secured; You and your co-founders will own a majority equity stake in the company; We provide continuous support after post spin-out, including fundraising, commercial partnerships, recruitment and team-building (amongst other things); plus There are dozens of Founders currently at DSV across sectors working collaboratively and supporting one another - a unique resource to draw on. ABOUT DSV Deep Science Ventures is creating a future in which both humans and the planet can thrive. We use our unique venture creation process to create, spin-out and invest into science companies, combining available scientific knowledge and founder-type scientists into high-impact ventures. We operate in 4 sectors: Pharmaceuticals, Climate, Agriculture and Computation, tackling the challenges defining those areas by taking a first principles approach and partnering with leading institutions.
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
May 17, 2024
Full time
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
Homecare Technician location Rate: - 14.00 Per Hour Location: Peterborough What you will enjoy doing You will be responsible for the safe and efficient installation, replenishment, service and removal of medical oxygen systems to patients in their homes, on time and in full. You will be required to train patients and their carers in the safe use of the system through a practical demonstration. You will effectively manage the stores by ensuring that booking in/out disciplines are maintained so that customer service is not compromised through insufficient stocks of e.g. consumables You will be able to decide based on a competency assessment and risk assessment whether a patient is able to use specific oxygen therapy equipment What makes you great Reasonable level of DIY skills Good customer service skills Clean UK driving licence and emphasis on safety Proficient in the use of basic software packages (excel, word, PowerPoint) You must also have a high level of integrity Why you will love working with us Linde plc is known as a world leader in gases, engineering and healthcare. We operate in more than 100 countries across the globe and generated pro forma sales of USD 28 billion (EUR 24 billion) in 2018. But what makes us great is our people, because they make great things happen. Guided by integrity, Linde employees take pride in what they do, because they know it makes a real difference to our customers. They are empowered to turn a challenge into an opportunity to learn and grow. This is how they take the lead, every day. We are looking forward to receiving your complete online application.
May 17, 2024
Seasonal
Homecare Technician location Rate: - 14.00 Per Hour Location: Peterborough What you will enjoy doing You will be responsible for the safe and efficient installation, replenishment, service and removal of medical oxygen systems to patients in their homes, on time and in full. You will be required to train patients and their carers in the safe use of the system through a practical demonstration. You will effectively manage the stores by ensuring that booking in/out disciplines are maintained so that customer service is not compromised through insufficient stocks of e.g. consumables You will be able to decide based on a competency assessment and risk assessment whether a patient is able to use specific oxygen therapy equipment What makes you great Reasonable level of DIY skills Good customer service skills Clean UK driving licence and emphasis on safety Proficient in the use of basic software packages (excel, word, PowerPoint) You must also have a high level of integrity Why you will love working with us Linde plc is known as a world leader in gases, engineering and healthcare. We operate in more than 100 countries across the globe and generated pro forma sales of USD 28 billion (EUR 24 billion) in 2018. But what makes us great is our people, because they make great things happen. Guided by integrity, Linde employees take pride in what they do, because they know it makes a real difference to our customers. They are empowered to turn a challenge into an opportunity to learn and grow. This is how they take the lead, every day. We are looking forward to receiving your complete online application.
Working within the Terminal Capital Project team and reporting to the Project Engineering Lead, the role will have responsibility for ensuring the Electrical designs are within specification and compliance with regulatory and company standards and will monitor the design throughout the engineering phases of the project life cycle. The ideal candidate will hold a Master's degree level qualification in Electrical Engineering (ideally chartered) and have demonstrable technical and project delivery experience gained from working within the oil and gas, chemical or other regulated industry. The position is offered on a fixed term staff contract - expected duration of two years. Primary Role Objectives â Regulatory and Company compliance â Review the development of the electrical and controls premises to ensure that the design is safe, operable and efficient â Review engineering drawings and relevant documents prepared by the design contractor â Process technical queries and requests for technical deviations â Report technical deviations â Selection and evaluation of technology, identifying integration and infrastructure issues â Follow up contractors' evaluation of technology and provide necessary interface with Operations during design stages â Attend inter-discipline technical meetings, including interface meetings â Monitor performance of the design contractor's electrical design team â Provide engineering support and data of existing facilities to design contractor â Provide input to budgets and planning â Participate in the development of the control system philosophy â Participate in the development of operation, maintenance and start-up philosophies and plans â Participate in the project risk, planning and budget process â Report and process technical queries and requests for technical deviations â Review Management of Change documentation â Coordinate communication with Operations regarding electrical issues â Provide engineering input to procurement process â Participate in relevant Factory Acceptance tests (FAT) â Ensure all Electrical project activities are performed in accordance with the COPNO procedure for work on electrical systems on Ekofisk â Participate in HAZID and HAZOP meetings â Attend technical audits as requested by Management â Actively support other disciplines to ensure interdisciplinary coherence and experience transfer Skills, Experience & Competencies Basic Requirements â MSc. Engineer in Electrical Engineering (Less formal education may be compensated with documented relevant experience) â Minimum 5 to 10 years project experience from new onshore/offshore modification projects. â Understanding of operational and maintenance requirements with regard to hazardous plant installation design â In depth knowledge of relevant industry codes and standards. â Well-developed verbal and written communication skills in English â Strong commercial skills and business driver understanding to manage and direct the execution of engineering works and interfaces between contractors. â Good interpersonal, networking, and relationship-building skills, both internally to the project and with contractors â Strong commitment to the implementation of Company's health, safety, environmental and quality philosophies â Experience and ability to work in multi-disciplined teams and interfacing with internal organisations and external Contractor organisations. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
May 17, 2024
Full time
Working within the Terminal Capital Project team and reporting to the Project Engineering Lead, the role will have responsibility for ensuring the Electrical designs are within specification and compliance with regulatory and company standards and will monitor the design throughout the engineering phases of the project life cycle. The ideal candidate will hold a Master's degree level qualification in Electrical Engineering (ideally chartered) and have demonstrable technical and project delivery experience gained from working within the oil and gas, chemical or other regulated industry. The position is offered on a fixed term staff contract - expected duration of two years. Primary Role Objectives â Regulatory and Company compliance â Review the development of the electrical and controls premises to ensure that the design is safe, operable and efficient â Review engineering drawings and relevant documents prepared by the design contractor â Process technical queries and requests for technical deviations â Report technical deviations â Selection and evaluation of technology, identifying integration and infrastructure issues â Follow up contractors' evaluation of technology and provide necessary interface with Operations during design stages â Attend inter-discipline technical meetings, including interface meetings â Monitor performance of the design contractor's electrical design team â Provide engineering support and data of existing facilities to design contractor â Provide input to budgets and planning â Participate in the development of the control system philosophy â Participate in the development of operation, maintenance and start-up philosophies and plans â Participate in the project risk, planning and budget process â Report and process technical queries and requests for technical deviations â Review Management of Change documentation â Coordinate communication with Operations regarding electrical issues â Provide engineering input to procurement process â Participate in relevant Factory Acceptance tests (FAT) â Ensure all Electrical project activities are performed in accordance with the COPNO procedure for work on electrical systems on Ekofisk â Participate in HAZID and HAZOP meetings â Attend technical audits as requested by Management â Actively support other disciplines to ensure interdisciplinary coherence and experience transfer Skills, Experience & Competencies Basic Requirements â MSc. Engineer in Electrical Engineering (Less formal education may be compensated with documented relevant experience) â Minimum 5 to 10 years project experience from new onshore/offshore modification projects. â Understanding of operational and maintenance requirements with regard to hazardous plant installation design â In depth knowledge of relevant industry codes and standards. â Well-developed verbal and written communication skills in English â Strong commercial skills and business driver understanding to manage and direct the execution of engineering works and interfaces between contractors. â Good interpersonal, networking, and relationship-building skills, both internally to the project and with contractors â Strong commitment to the implementation of Company's health, safety, environmental and quality philosophies â Experience and ability to work in multi-disciplined teams and interfacing with internal organisations and external Contractor organisations. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Midas Selection (Midlands) Ltd
Sutton Coldfield, West Midlands
Commercial Gas Engineer: Join a Growing Team & Build Local Expertise (Walsall & Surrounding Areas) Are you a skilled and experienced Gas Engineer looking for a stable position with a reputable company? We are partnering with a fantastic business in Walsall searching for passionate Gas Engineers to join their close-knit team. This role offers the opportunity to establish yourself within a well-established company with a strong focus on local work and a healthy work-life balance. What We Offer: Competitive salary: Up to £40,000 per annum Company van provided Sociable working hours: 8am - 4:30pm, Monday - Friday (no weekends!) Generous annual leave package: 28 days Employee discounts: Save on a variety of online and high street retailers On-the-job training and development opportunities for career progression Who You Are: A highly motivated and results-oriented Gas Safe registered engineer Proven experience in boiler installations, ideally within a commercial setting (though not essential) Eager to learn and adapt to new technologies within the industry A strong team player with excellent communication skills Ability to work independently when needed Willing to undergo a DBS check What You'll Do: Install commercial boilers and perform associated mechanical works Operate various power tools and safely manage heavy lifting tasks Assemble and weld heating system components Conduct routine maintenance on existing heating systems Collaborate effectively with colleagues and manage independent projects Ready to Join Our Team? Immediate interviews are available! Don't miss out on this fantastic opportunity. Submit your CV!
May 17, 2024
Full time
Commercial Gas Engineer: Join a Growing Team & Build Local Expertise (Walsall & Surrounding Areas) Are you a skilled and experienced Gas Engineer looking for a stable position with a reputable company? We are partnering with a fantastic business in Walsall searching for passionate Gas Engineers to join their close-knit team. This role offers the opportunity to establish yourself within a well-established company with a strong focus on local work and a healthy work-life balance. What We Offer: Competitive salary: Up to £40,000 per annum Company van provided Sociable working hours: 8am - 4:30pm, Monday - Friday (no weekends!) Generous annual leave package: 28 days Employee discounts: Save on a variety of online and high street retailers On-the-job training and development opportunities for career progression Who You Are: A highly motivated and results-oriented Gas Safe registered engineer Proven experience in boiler installations, ideally within a commercial setting (though not essential) Eager to learn and adapt to new technologies within the industry A strong team player with excellent communication skills Ability to work independently when needed Willing to undergo a DBS check What You'll Do: Install commercial boilers and perform associated mechanical works Operate various power tools and safely manage heavy lifting tasks Assemble and weld heating system components Conduct routine maintenance on existing heating systems Collaborate effectively with colleagues and manage independent projects Ready to Join Our Team? Immediate interviews are available! Don't miss out on this fantastic opportunity. Submit your CV!
Are you qualified in Installing Gas Boilers? Can you price up work correctly? We are currently recruiting for a Gas Installation Manager to manage Engineers in Hemel Hempstead, Milton Keynes, Enfield and Watford areas. The positions will be employed by a company who has been trading for nearly 30 years and is a specialist within the heating and maintenance industry click apply for full job details
May 17, 2024
Full time
Are you qualified in Installing Gas Boilers? Can you price up work correctly? We are currently recruiting for a Gas Installation Manager to manage Engineers in Hemel Hempstead, Milton Keynes, Enfield and Watford areas. The positions will be employed by a company who has been trading for nearly 30 years and is a specialist within the heating and maintenance industry click apply for full job details
Working within the Terminal Capital Projects team and reporting to the Project Engineering Lead, the role will lead the Instrumentation and Control engineering and design requirements for the project, ensuring compliance with regulatory and company standards, and will monitor the design throughout the engineering phases of the project life cycle. The ideal candidate will be degree educated in relevant discipline (ideally chartered) and have demonstrable experience in Instrumentation and engineering project delivery, gained from working within the oil and gas, chemical or other regulated industry. The position is offered on a fixed term staff contract - expected duration of two years. Primary Role Objectives â Regulatory and Company compliance â Attend and actively contribute in technical Instrumentation discipline meetings, including interface meetings with Discipline Lead SAS and Telecommunication. â Ensure that safe, operable, and efficient instrumentation design is provided. â Identifying integration and infrastructure issues and provide data of existing facilities to design contractor. â Day-to-day contact with contractors' instrumentation engineers â Implement procedures and standards. â Follow up contractors' evaluation of technology and provide necessary interface with Operations during design stages. â Report technical deviations. â Present proposals and alternative solutions when required. â Attend inter-discipline technical meetings. â Attending technical audits as requested by Management. â Process and follow up technical queries from contractors and Operations. â Actively support other disciplines to ensure inter-discipline coherence and experience transfer. â Participate in project risk management process. â Participate in HAZID and HAZOP meetings. â Participate in vendor inspections, MC and FAT activities. â Expenditure authority as defined within the limits of the COPNO ALM Authorities. Skills, Experience & Competencies Basic Requirements â MSc. Engineer in Electrical Engineering (Less formal education may be compensated with documented relevant experience) â Minimum 5 to 10 years project experience from new onshore/offshore modification projects. â Understanding of operational and maintenance requirements with regard to hazardous plant installation design â In depth knowledge of relevant industry codes and standards. â Well-developed verbal and written communication skills in English â Strong commercial skills and business driver understanding to manage and direct the execution of engineering works and interfaces between contractors. â Good interpersonal, networking, and relationship-building skills, both internally to the project and with contractors â Strong commitment to the implementation of Company's health, safety, environmental and quality philosophies â Experience and ability to work in multi-disciplined teams and interfacing with internal organisations and external Contractor organisations. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
May 17, 2024
Full time
Working within the Terminal Capital Projects team and reporting to the Project Engineering Lead, the role will lead the Instrumentation and Control engineering and design requirements for the project, ensuring compliance with regulatory and company standards, and will monitor the design throughout the engineering phases of the project life cycle. The ideal candidate will be degree educated in relevant discipline (ideally chartered) and have demonstrable experience in Instrumentation and engineering project delivery, gained from working within the oil and gas, chemical or other regulated industry. The position is offered on a fixed term staff contract - expected duration of two years. Primary Role Objectives â Regulatory and Company compliance â Attend and actively contribute in technical Instrumentation discipline meetings, including interface meetings with Discipline Lead SAS and Telecommunication. â Ensure that safe, operable, and efficient instrumentation design is provided. â Identifying integration and infrastructure issues and provide data of existing facilities to design contractor. â Day-to-day contact with contractors' instrumentation engineers â Implement procedures and standards. â Follow up contractors' evaluation of technology and provide necessary interface with Operations during design stages. â Report technical deviations. â Present proposals and alternative solutions when required. â Attend inter-discipline technical meetings. â Attending technical audits as requested by Management. â Process and follow up technical queries from contractors and Operations. â Actively support other disciplines to ensure inter-discipline coherence and experience transfer. â Participate in project risk management process. â Participate in HAZID and HAZOP meetings. â Participate in vendor inspections, MC and FAT activities. â Expenditure authority as defined within the limits of the COPNO ALM Authorities. Skills, Experience & Competencies Basic Requirements â MSc. Engineer in Electrical Engineering (Less formal education may be compensated with documented relevant experience) â Minimum 5 to 10 years project experience from new onshore/offshore modification projects. â Understanding of operational and maintenance requirements with regard to hazardous plant installation design â In depth knowledge of relevant industry codes and standards. â Well-developed verbal and written communication skills in English â Strong commercial skills and business driver understanding to manage and direct the execution of engineering works and interfaces between contractors. â Good interpersonal, networking, and relationship-building skills, both internally to the project and with contractors â Strong commitment to the implementation of Company's health, safety, environmental and quality philosophies â Experience and ability to work in multi-disciplined teams and interfacing with internal organisations and external Contractor organisations. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Role: Heating Engineer Salary: 37,000 + company van Location: Midlands Mainstay is currently working with a well-established company who are looking for a Heating Engineer in performing planned and reactive maintenance across numerous sites around the Midlands. Our client is a business that offers continuous support and invests a huge amount in their staff and retention. They have grown due to their diverse approach and exhibit strong company values. Role: As an Heating Engineer you will perform Planned Preventive Maintenance as well as Reactive Maintenance As an Heating Engineer you will perform mechanical maintenance across many aspects on site including combi boilers, pipework, taps, toilets, heating systems, plant rooms You will also perform small installations across the site Part of your role will involve assisting in project planning, estimation, and stock control of critical Electrical /mechanical / building fabric spares As a Heating Engineer you will ensure all work completed is compliant and in line with health and safety regulations You will also ensure that you offer great customer service Duties: As an Heating Engineer you must hold relevant qualifications within Mechanical engineer installations e.g. City & guilds level 3 in Plumbing and Heating Holding a qualification in domestic gas would be an advantage You must have experience in a similar role performing maintenance across a large estate Good written and verbal communication is a must Must hold a full UK driving license
May 17, 2024
Full time
Role: Heating Engineer Salary: 37,000 + company van Location: Midlands Mainstay is currently working with a well-established company who are looking for a Heating Engineer in performing planned and reactive maintenance across numerous sites around the Midlands. Our client is a business that offers continuous support and invests a huge amount in their staff and retention. They have grown due to their diverse approach and exhibit strong company values. Role: As an Heating Engineer you will perform Planned Preventive Maintenance as well as Reactive Maintenance As an Heating Engineer you will perform mechanical maintenance across many aspects on site including combi boilers, pipework, taps, toilets, heating systems, plant rooms You will also perform small installations across the site Part of your role will involve assisting in project planning, estimation, and stock control of critical Electrical /mechanical / building fabric spares As a Heating Engineer you will ensure all work completed is compliant and in line with health and safety regulations You will also ensure that you offer great customer service Duties: As an Heating Engineer you must hold relevant qualifications within Mechanical engineer installations e.g. City & guilds level 3 in Plumbing and Heating Holding a qualification in domestic gas would be an advantage You must have experience in a similar role performing maintenance across a large estate Good written and verbal communication is a must Must hold a full UK driving license