Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies. Key Responsibilities Install instrumentation on propulsion systems, including engines, batteries, and electric motors. Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs. Assist engineers with commissioning and preparing the device under test (DUT) for operation. Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed. Contribute to the development process through hardware adjustments and problem-solving. Demonstrate strong knowledge of electronic control systems. Maintain awareness and understanding of battery and electric motor technology. Required Skills and Experience BTEC Level 3 or equivalent apprenticeship in engineering is advantageous. GCSEs in Mathematics, English, and Science (Grades 5-9). At least 3 years of propulsion testing experience in a similar environment. Proficient diagnostic skills, especially with engine ECU and battery BMS systems
Sep 04, 2025
Full time
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies. Key Responsibilities Install instrumentation on propulsion systems, including engines, batteries, and electric motors. Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs. Assist engineers with commissioning and preparing the device under test (DUT) for operation. Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed. Contribute to the development process through hardware adjustments and problem-solving. Demonstrate strong knowledge of electronic control systems. Maintain awareness and understanding of battery and electric motor technology. Required Skills and Experience BTEC Level 3 or equivalent apprenticeship in engineering is advantageous. GCSEs in Mathematics, English, and Science (Grades 5-9). At least 3 years of propulsion testing experience in a similar environment. Proficient diagnostic skills, especially with engine ECU and battery BMS systems
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Site Automation Engineer Runcorn Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: - Inverter drives - Programmable safety systems - PLCs - Servo drives -SCADA system - Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 04, 2025
Full time
Site Automation Engineer Runcorn Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: - Inverter drives - Programmable safety systems - PLCs - Servo drives -SCADA system - Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Site Automation Engineer Warrington Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: Inverter drives Programmable safety systems PLCs Servo drives SCADA system Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 04, 2025
Full time
Site Automation Engineer Warrington Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: Inverter drives Programmable safety systems PLCs Servo drives SCADA system Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Lead Senior Authorised Person (SAP) We have an opportunity for an individual with Safe System of Work (SSOW) experience to join our highly skilled engineering team at Uniper's upper tier COMAH facility, Holford Gas Storage. Holford Gas Storage is a flexible Natural Gas Storage facility designed to meet the UK's demands.The role involves leading the preparation of plant and equipment, production of safety documentation, owning and maintaining of critical procedures and equipment to deliver safety from plant hazards whilst influencing Holford's maintenance planning and delivery programmes. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities • Prepare and issue site safety documentation • Prepare plant and equipment for maintenance including draining, venting and purging of high pressure gas systems and isolation of high voltage (33KV) electrical systems to deliver safety from system derived hazards • Manage the permit office and it's administration including writing, updating and maintaining the site's safety management systems • Help plan, resource and deliver the maintenance plan at Holford by proactively engaging and with the site engineering and production teams • Provide training to other site SAP's, Uniper and contract staff • Provide guidance and governance to ensure the site wide compliance to the Uniper UK safety rules Your profile Essential • Experience of working within a safe system of work (SSOW) • Is able to understand and interpret P&ID's, instrument loop diagrams and electrical drawings in order to design safe isolations • Be methodical in your approach to work and have a strong attention to detail • Ability to work within, and promote an excellent safety culture. • Able to plan, prioritise and independently deliver planned and outage work at site • Be flexible in your approach to work and working times (this is primarily a Mon - Fri job but it will require early starts and late finishes along with some weekend working to accommodate plant maintenance activities/breakdowns) • Can work independently, and within a team with excellent communication skills • Willingness to develop themselves and the wider business personnel • Confidence to challenge established practices and procedures in a constructive manner • Proficient IT skills Desirable: • Previous experience in preparation and issue of safety documentation • Electrical or control and instrumentation trade background • Previous experience in the isolating electrical systems or a working knowledge of reading electrical line diagrams and control and instrument loop diagrams • Experience in computerised maintenance management systems (SAP PM/Merlin etc) • Previous experience in the petro-chem/oil and gas, or similar industries • Proficient IT skills • Previous SAP experience is an advantage but not strictly necessary. If a candidate displays the required attitude and aptitude full training, including a development plan will be offered to become a Senior Authorised Person initially, progressing to Lead Senior Authorised over an extended period. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: 30/09/2025 Salary: £60,000 - £74,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
Sep 04, 2025
Full time
Lead Senior Authorised Person (SAP) We have an opportunity for an individual with Safe System of Work (SSOW) experience to join our highly skilled engineering team at Uniper's upper tier COMAH facility, Holford Gas Storage. Holford Gas Storage is a flexible Natural Gas Storage facility designed to meet the UK's demands.The role involves leading the preparation of plant and equipment, production of safety documentation, owning and maintaining of critical procedures and equipment to deliver safety from plant hazards whilst influencing Holford's maintenance planning and delivery programmes. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities • Prepare and issue site safety documentation • Prepare plant and equipment for maintenance including draining, venting and purging of high pressure gas systems and isolation of high voltage (33KV) electrical systems to deliver safety from system derived hazards • Manage the permit office and it's administration including writing, updating and maintaining the site's safety management systems • Help plan, resource and deliver the maintenance plan at Holford by proactively engaging and with the site engineering and production teams • Provide training to other site SAP's, Uniper and contract staff • Provide guidance and governance to ensure the site wide compliance to the Uniper UK safety rules Your profile Essential • Experience of working within a safe system of work (SSOW) • Is able to understand and interpret P&ID's, instrument loop diagrams and electrical drawings in order to design safe isolations • Be methodical in your approach to work and have a strong attention to detail • Ability to work within, and promote an excellent safety culture. • Able to plan, prioritise and independently deliver planned and outage work at site • Be flexible in your approach to work and working times (this is primarily a Mon - Fri job but it will require early starts and late finishes along with some weekend working to accommodate plant maintenance activities/breakdowns) • Can work independently, and within a team with excellent communication skills • Willingness to develop themselves and the wider business personnel • Confidence to challenge established practices and procedures in a constructive manner • Proficient IT skills Desirable: • Previous experience in preparation and issue of safety documentation • Electrical or control and instrumentation trade background • Previous experience in the isolating electrical systems or a working knowledge of reading electrical line diagrams and control and instrument loop diagrams • Experience in computerised maintenance management systems (SAP PM/Merlin etc) • Previous experience in the petro-chem/oil and gas, or similar industries • Proficient IT skills • Previous SAP experience is an advantage but not strictly necessary. If a candidate displays the required attitude and aptitude full training, including a development plan will be offered to become a Senior Authorised Person initially, progressing to Lead Senior Authorised over an extended period. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: 30/09/2025 Salary: £60,000 - £74,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
Salary - £38,462 - £44,320 Work Type - Onsite Job Location - Crewe Wastewater Treatment Works, Main Road, Worleston, Cheshire, CW5 6DU Role Type - Permanent Employment Type - Full Time Working Hours - 37.0 Hours per Week United Utilities' (UU) purpose is to deliver great water for a stronger, greener and healthier North West of England. We are committed to providing our services in a way that respects the environment, supports the economy, and benefits society. We value diversity, inclusion and innovation in our workplace, and we foster a culture where our people can grow, excel, and be themselves. We uphold our ethics, values and business model to fulfil our mission and, by setting clear goals and objectives, we create sustainable long-term value for our colleagues, customers and communities. Whether you work with a team that shares your vision or join a network of peers with similar interests, you will find a welcoming and supportive organisation to be part of. We've got a lot to offer. You'll be part of a thriving FTSE 100 company and will enjoy a range of core benefits that reflect your value and value contribution. Benefits A generous annual leave package of 26 days, which increases to 30 days after four years of service (increases one day per year), in addition to 8 bank holidays A competitive pension scheme with up to 14% employer contribution, 21% combined, and life cover Up to 7.5% performance-related bonus scheme, as well as recognition awards for outstanding achievements A comprehensive healthcare plan through our company-funded scheme MyGymDiscounts - gym and wellness benefit that offers up to 25% off on gym memberships and digital fitness subscriptions Best Doctors Salary Finance Wealth at Work courses Deals and discounts EVolve Car Scheme Employee Assistance Plan Mental health first aiders ShareBuy MORE Choices flexible benefits Enhanced parental leave schemes Job Purpose We are currently seeking a skilled Electrical Network Asset Engineer to join our team, with a clear and supported pathway to develop Instrumentation or Mechanical engineering capabilities. This role is offered initially as a single-skilled position, with the opportunity to upskill into a flexi-skilled role through our in-house technical training programme. Upon successful completion of training and competency sign-off in the secondary discipline, the role will transition to a flexi-skilled position. The starting salary for this role is £38,462, with progression to £44,320 once fully trained and signed off in the secondary skill. This is an excellent opportunity for career development within a supportive and forward-thinking engineering environment. Accountabilities & Responsibilities Ensuring compliance with United Utilities Health and Safety policies and procedures at all times, you will be accountable for ensuring that the correct electrical and (Instrumentation OR Mechanical ) maintenance activities are undertaken within agreed timescales at all powered sites within a defined geographical areas. You will also be accountable for: Respond to alarms, customer calls, and field notifications, providing first-line support for powered assets during standby. Support the Network Asset Controller in managing telemetry alarm settings and ensuring accurate asset registration. Maintain reliable and complete maintenance data while ensuring compliance with Environment Agency (EA) permit conditions. Act as the Person Controlling the Works (PCW) for on-site electrical work, ensuring safety, quality, and timely delivery. Contribute to asset planning, contingency reviews, and maintenance strategy improvements using Reliability Centred Maintenance (RCM) principles. The successful candidate will be required to take part in an out of hours standby rota (minimum 1 in 6) Technical Skills & Experience You will be time served within a primary Electrical discipline, and have received further training to a secondary (Mechanical OR Instrumentation) discipline. As well as being able to demonstrate a basic maintenance understanding of the operation of powered assets, and a general understanding of wastewater network activities. You will also have: Information technology skills with the ability to understand United Utilities systems and their capabilities and limitations. Interpersonal skills in order to communicate effectively with colleagues and customers. Often working alone you will need to be capable of using your own initiative and have a flexible approach to highly varied workloads. Time management - ability to work to agreed deadlines and achieve personal objectives. Ability to co-ordinate framework contractors in delivering small projects and remedial works. Knowledge of and trained in / or to British Standard 7671 Requirements for Electrical Installations, Construction Design Management (CDM) and DSEAR Awareness, New Roads and Street Works Act (NRSWA), Manual Handling and Confined Spaces etc, as required. Full UK driving licence is needed to carry out the role. Qualifications To succeed in this role you will need to be qualified City and Guilds or National Vocational Qualification (NVQ) Level 3 (or equivalent) in a primary Electrical and secondary in either a Mechanical OR Instrumentation discipline as a minimum. We rely on every employee to ensure our customers receive the best possible service, day in, day out. In return, we ensure that you will be well rewarded for your efforts, from an excellent salary through to development opportunities that will really kick start a thriving career here at UU.
Sep 04, 2025
Full time
Salary - £38,462 - £44,320 Work Type - Onsite Job Location - Crewe Wastewater Treatment Works, Main Road, Worleston, Cheshire, CW5 6DU Role Type - Permanent Employment Type - Full Time Working Hours - 37.0 Hours per Week United Utilities' (UU) purpose is to deliver great water for a stronger, greener and healthier North West of England. We are committed to providing our services in a way that respects the environment, supports the economy, and benefits society. We value diversity, inclusion and innovation in our workplace, and we foster a culture where our people can grow, excel, and be themselves. We uphold our ethics, values and business model to fulfil our mission and, by setting clear goals and objectives, we create sustainable long-term value for our colleagues, customers and communities. Whether you work with a team that shares your vision or join a network of peers with similar interests, you will find a welcoming and supportive organisation to be part of. We've got a lot to offer. You'll be part of a thriving FTSE 100 company and will enjoy a range of core benefits that reflect your value and value contribution. Benefits A generous annual leave package of 26 days, which increases to 30 days after four years of service (increases one day per year), in addition to 8 bank holidays A competitive pension scheme with up to 14% employer contribution, 21% combined, and life cover Up to 7.5% performance-related bonus scheme, as well as recognition awards for outstanding achievements A comprehensive healthcare plan through our company-funded scheme MyGymDiscounts - gym and wellness benefit that offers up to 25% off on gym memberships and digital fitness subscriptions Best Doctors Salary Finance Wealth at Work courses Deals and discounts EVolve Car Scheme Employee Assistance Plan Mental health first aiders ShareBuy MORE Choices flexible benefits Enhanced parental leave schemes Job Purpose We are currently seeking a skilled Electrical Network Asset Engineer to join our team, with a clear and supported pathway to develop Instrumentation or Mechanical engineering capabilities. This role is offered initially as a single-skilled position, with the opportunity to upskill into a flexi-skilled role through our in-house technical training programme. Upon successful completion of training and competency sign-off in the secondary discipline, the role will transition to a flexi-skilled position. The starting salary for this role is £38,462, with progression to £44,320 once fully trained and signed off in the secondary skill. This is an excellent opportunity for career development within a supportive and forward-thinking engineering environment. Accountabilities & Responsibilities Ensuring compliance with United Utilities Health and Safety policies and procedures at all times, you will be accountable for ensuring that the correct electrical and (Instrumentation OR Mechanical ) maintenance activities are undertaken within agreed timescales at all powered sites within a defined geographical areas. You will also be accountable for: Respond to alarms, customer calls, and field notifications, providing first-line support for powered assets during standby. Support the Network Asset Controller in managing telemetry alarm settings and ensuring accurate asset registration. Maintain reliable and complete maintenance data while ensuring compliance with Environment Agency (EA) permit conditions. Act as the Person Controlling the Works (PCW) for on-site electrical work, ensuring safety, quality, and timely delivery. Contribute to asset planning, contingency reviews, and maintenance strategy improvements using Reliability Centred Maintenance (RCM) principles. The successful candidate will be required to take part in an out of hours standby rota (minimum 1 in 6) Technical Skills & Experience You will be time served within a primary Electrical discipline, and have received further training to a secondary (Mechanical OR Instrumentation) discipline. As well as being able to demonstrate a basic maintenance understanding of the operation of powered assets, and a general understanding of wastewater network activities. You will also have: Information technology skills with the ability to understand United Utilities systems and their capabilities and limitations. Interpersonal skills in order to communicate effectively with colleagues and customers. Often working alone you will need to be capable of using your own initiative and have a flexible approach to highly varied workloads. Time management - ability to work to agreed deadlines and achieve personal objectives. Ability to co-ordinate framework contractors in delivering small projects and remedial works. Knowledge of and trained in / or to British Standard 7671 Requirements for Electrical Installations, Construction Design Management (CDM) and DSEAR Awareness, New Roads and Street Works Act (NRSWA), Manual Handling and Confined Spaces etc, as required. Full UK driving licence is needed to carry out the role. Qualifications To succeed in this role you will need to be qualified City and Guilds or National Vocational Qualification (NVQ) Level 3 (or equivalent) in a primary Electrical and secondary in either a Mechanical OR Instrumentation discipline as a minimum. We rely on every employee to ensure our customers receive the best possible service, day in, day out. In return, we ensure that you will be well rewarded for your efforts, from an excellent salary through to development opportunities that will really kick start a thriving career here at UU.
About Us Salary - £38,462 Work Type - Onsite Job Location - Blackburn waste water treatment works, Cuerdale Lane Samlesbury Blackburn Lancashire PR5 0UY Role Type - Permanent Employment Type - Full Time Working Hours - 37.0 Hours per Week United Utilities' (UU) purpose is to deliver great water for a stronger, greener and healthier North West of England. We are committed to providing our services in a way that respects the environment, supports the economy, and benefits society. We value diversity, inclusion and innovation in our workplace, and we foster a culture where our people can grow, excel, and be themselves. We uphold our ethics, values and business model to fulfil our mission and, by setting clear goals and objectives, we create sustainable long-term value for our colleagues, customers and communities. Whether you work with a team that shares your vision or join a network of peers with similar interests, you will find a welcoming and supportive organisation to be part of. We've got a lot to offer. You'll be part of a thriving FTSE 100 company and will enjoy a range of core benefits that reflect your value and value contribution. Benefits A generous annual leave package of 26 days, which increases to 30 days after four years of service (increases one day per year), in addition to 8 bank holidays A competitive pension scheme with up to 14% employer contribution, 21% combined, and life cover Up to 7.5% performance-related bonus scheme, as well as recognition awards for outstanding achievements A comprehensive healthcare plan through our company-funded scheme MyGymDiscounts - gym and wellness benefit that offers up to 25% off on gym memberships and digital fitness subscriptions Best Doctors Salary Finance Wealth at Work courses Deals and discounts EVolve Car Scheme Employee Assistance Plan Mental health first aiders ShareBuy MORE Choices flexible benefits Enhanced parental leave schemes The Role Are you an electrically minded problem solver who thrives in the field? Ready to take your skills from workshop to waterworks? We're looking for a hands-on qualified forward-thinking Electrical Field Service Engineer to join our dedicated operations team, keeping essential treatment sites running smoothly. You'll play a key role in maintaining, repairing, and optimising critical assets-from pumps and panels to control systems. This is your chance to work on critical infrastructure that keeps communities flowing. Key Accountabilities Electrical Maintenance & Repair : Carry out planned and reactive maintenance on electrical equipment including pumps, motors, panels, sensors, and control systems across water and wastewater treatment sites. Fault Diagnosis: Respond quickly and effectively to electrical faults or breakdowns, using technical expertise to minimise downtime and maintain site performance. Compliance & Safety: Ensure all work complies with health, safety, and environmental regulations, electrical standards, and company policies - prioritising safe systems of work at all times. Documentation & Reporting: Maintain accurate records of work completed, including asset condition, repair history, and any further recommendations. Asset Optimisation: Support the improvement of plant performance by identifying opportunities to enhance reliability, reduce energy consumption, and prevent recurring issues. Collaboration: Work closely with site-based operators, mechanical engineers, and contractors to ensure seamless service delivery and strong communication. Mobile Coverage: Travel across designated sites within your region, managing your time efficiently and responding to priority tasks when required. Essential Skills Electrical qualifications - you must be a time served apprentice or equivalent, supported with academic qualification(s). Full UK driving license is essential due to the mobile nature of the role. Field service experience - Proven experience in an electrical maintenance or engineering role, ideally in a field-based or utilities environment. Fault-finding expertise - Strong diagnostic and problem-solving skills across electrical systems, controls, and instrumentation. Knowledge of pumps and motors - Familiarity with maintaining and servicing rotating equipment, particularly in water, wastewater, or similar process industries. Health & Safety awareness - Solid understanding of safe systems of work, risk assessments, and permit-to-work systems. Team player - Comfortable working independently while maintaining strong communication and collaboration with on-site teams and contractors. This role may not be eligible for visa sponsorship We rely on every employee to ensure our customers receive the best possible service, day in, day out. In return, we ensure that you will be well rewarded for your efforts, from an excellent salary through to development opportunities that will really kick start a thriving career here at UU.
Sep 04, 2025
Full time
About Us Salary - £38,462 Work Type - Onsite Job Location - Blackburn waste water treatment works, Cuerdale Lane Samlesbury Blackburn Lancashire PR5 0UY Role Type - Permanent Employment Type - Full Time Working Hours - 37.0 Hours per Week United Utilities' (UU) purpose is to deliver great water for a stronger, greener and healthier North West of England. We are committed to providing our services in a way that respects the environment, supports the economy, and benefits society. We value diversity, inclusion and innovation in our workplace, and we foster a culture where our people can grow, excel, and be themselves. We uphold our ethics, values and business model to fulfil our mission and, by setting clear goals and objectives, we create sustainable long-term value for our colleagues, customers and communities. Whether you work with a team that shares your vision or join a network of peers with similar interests, you will find a welcoming and supportive organisation to be part of. We've got a lot to offer. You'll be part of a thriving FTSE 100 company and will enjoy a range of core benefits that reflect your value and value contribution. Benefits A generous annual leave package of 26 days, which increases to 30 days after four years of service (increases one day per year), in addition to 8 bank holidays A competitive pension scheme with up to 14% employer contribution, 21% combined, and life cover Up to 7.5% performance-related bonus scheme, as well as recognition awards for outstanding achievements A comprehensive healthcare plan through our company-funded scheme MyGymDiscounts - gym and wellness benefit that offers up to 25% off on gym memberships and digital fitness subscriptions Best Doctors Salary Finance Wealth at Work courses Deals and discounts EVolve Car Scheme Employee Assistance Plan Mental health first aiders ShareBuy MORE Choices flexible benefits Enhanced parental leave schemes The Role Are you an electrically minded problem solver who thrives in the field? Ready to take your skills from workshop to waterworks? We're looking for a hands-on qualified forward-thinking Electrical Field Service Engineer to join our dedicated operations team, keeping essential treatment sites running smoothly. You'll play a key role in maintaining, repairing, and optimising critical assets-from pumps and panels to control systems. This is your chance to work on critical infrastructure that keeps communities flowing. Key Accountabilities Electrical Maintenance & Repair : Carry out planned and reactive maintenance on electrical equipment including pumps, motors, panels, sensors, and control systems across water and wastewater treatment sites. Fault Diagnosis: Respond quickly and effectively to electrical faults or breakdowns, using technical expertise to minimise downtime and maintain site performance. Compliance & Safety: Ensure all work complies with health, safety, and environmental regulations, electrical standards, and company policies - prioritising safe systems of work at all times. Documentation & Reporting: Maintain accurate records of work completed, including asset condition, repair history, and any further recommendations. Asset Optimisation: Support the improvement of plant performance by identifying opportunities to enhance reliability, reduce energy consumption, and prevent recurring issues. Collaboration: Work closely with site-based operators, mechanical engineers, and contractors to ensure seamless service delivery and strong communication. Mobile Coverage: Travel across designated sites within your region, managing your time efficiently and responding to priority tasks when required. Essential Skills Electrical qualifications - you must be a time served apprentice or equivalent, supported with academic qualification(s). Full UK driving license is essential due to the mobile nature of the role. Field service experience - Proven experience in an electrical maintenance or engineering role, ideally in a field-based or utilities environment. Fault-finding expertise - Strong diagnostic and problem-solving skills across electrical systems, controls, and instrumentation. Knowledge of pumps and motors - Familiarity with maintaining and servicing rotating equipment, particularly in water, wastewater, or similar process industries. Health & Safety awareness - Solid understanding of safe systems of work, risk assessments, and permit-to-work systems. Team player - Comfortable working independently while maintaining strong communication and collaboration with on-site teams and contractors. This role may not be eligible for visa sponsorship We rely on every employee to ensure our customers receive the best possible service, day in, day out. In return, we ensure that you will be well rewarded for your efforts, from an excellent salary through to development opportunities that will really kick start a thriving career here at UU.
C&I Project Engineer The Asset Support and Outage Excellence Team UK play a key role supporting power plant and gas storage projects, outages and maintenance activities across Uniper's UK and Swedish assets. The role is high-profile in helping to ensure security of supply and delivering Uniper's business strategy to accelerate the energy transition. We are looking for a Controls & Instrumentation (C&I) Projects Engineer to fulfil a discipline specific role. It is an exciting time to join the team, with the prospect for the right individual to work with a diverse mix of both established and new power plant and technology on advanced power stations and storage facilities. This is a tremendous opportunity, offering development and experience on a massive scale supporting assets and teams across power generation and storage stations. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities We are looking for people who can bring a flexible, enthusiastic approach, are highly self-motivated, conscientious and can demonstrate ownership of issues through to the implementation of solutions at any of our assets across the UK and Sweden. You will be capable of demonstrating and developing extensive knowledge and skills in a range of varied C&I engineering and maintenance work activities of a complex and non-routine nature in such a way as to maximise resource utilisation and station/facility availability. You must display capacity for individual responsibility, self-motivation and autonomy while demonstrating exemplary commitment to Uniper's HSSE and Quality culture. • Utilising your skills and experience to deliver projects and outages, identify and managing stakeholders across Uniper's functional organisation and with the supply chain, ensuring process and regulatory compliance with the highest standard of HSSE and Quality performance. • You will undertake proactive and reactive work, including fault finding, problem solving and investigations, across a broad range of process plant and systems in support of performance against Key Performance Indicators (safety, time, cost, quality, technical performance and compliance). • You will have the capability to lead project teams as required dependent on project complexity. • You will ensure best practice is employed and shared across Uniper sites by networking and benchmarking comparisons with plants, departments, engineers, industries and Uniper teams to achieve optimum levels of performance, revenue and capital expenditure. • You will be responsible for defining scopes of work and developing both technical and contract specifications. • Your attention to detail will ensure the establishment and delivery of contractor Quality Assurance and Quality Control. • You will actively promote a culture of health, safety, environmental awareness and quality; seek out improvements in all these areas and directly contribute to their development, planning and delivery for Asset Support and Uniper. Your profile Essential • You will be educated to a Higher National Diploma or Degree level in a Control & Instrumentation related discipline, supported with a knowledge of engineering, project management and maintenance practices gained through experience. • You will be able to apply your good working knowledge of health, safety and environmental legislation and standards to IOSH Managing Safely/NEBOSH Certificate level or a recognised equivalent in a practical manner. • You will have a sound understanding of complex C&I process system operations, knowledge of current regulations and policy which affect the management and operations of process plant engineering assets. • You will have the ability to investigate issues, determine root cause and apply engineering resolutions to complex C&I process systems, demonstrating compliance to change management processes. • Your strong interpersonal skills will enable effective working relationships within the team, across business functions and with senior stakeholders. • Your communication, planning and organisational skills will enable effective task prioritisation and resource management. • You will have knowledge, understanding and be able to demonstrate application of project management tools and techniques. • Your organisational, contract and project management skills enable you to run a contract within a project or outage which involve on/off site working including the health, safety, environmental and quality aspects as well as the commercial and technical issues. • Full and clean UK driving license. Desirable • Functional Safety (IEC61508/61511) and/or Cyber Security for Industrial and Control Systems (OG86). • Use and knowledge of best practice lean tools for resolving engineering issues to root cause level. • Management, fault finding and troubleshooting of DCS and PLC systems. • Management of alarms and simulations. • Knowledge and competence of using SAP based systems. • Experience of working in a fast-paced environment. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: Salary: £53,000 - £77,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
Sep 04, 2025
Full time
C&I Project Engineer The Asset Support and Outage Excellence Team UK play a key role supporting power plant and gas storage projects, outages and maintenance activities across Uniper's UK and Swedish assets. The role is high-profile in helping to ensure security of supply and delivering Uniper's business strategy to accelerate the energy transition. We are looking for a Controls & Instrumentation (C&I) Projects Engineer to fulfil a discipline specific role. It is an exciting time to join the team, with the prospect for the right individual to work with a diverse mix of both established and new power plant and technology on advanced power stations and storage facilities. This is a tremendous opportunity, offering development and experience on a massive scale supporting assets and teams across power generation and storage stations. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities We are looking for people who can bring a flexible, enthusiastic approach, are highly self-motivated, conscientious and can demonstrate ownership of issues through to the implementation of solutions at any of our assets across the UK and Sweden. You will be capable of demonstrating and developing extensive knowledge and skills in a range of varied C&I engineering and maintenance work activities of a complex and non-routine nature in such a way as to maximise resource utilisation and station/facility availability. You must display capacity for individual responsibility, self-motivation and autonomy while demonstrating exemplary commitment to Uniper's HSSE and Quality culture. • Utilising your skills and experience to deliver projects and outages, identify and managing stakeholders across Uniper's functional organisation and with the supply chain, ensuring process and regulatory compliance with the highest standard of HSSE and Quality performance. • You will undertake proactive and reactive work, including fault finding, problem solving and investigations, across a broad range of process plant and systems in support of performance against Key Performance Indicators (safety, time, cost, quality, technical performance and compliance). • You will have the capability to lead project teams as required dependent on project complexity. • You will ensure best practice is employed and shared across Uniper sites by networking and benchmarking comparisons with plants, departments, engineers, industries and Uniper teams to achieve optimum levels of performance, revenue and capital expenditure. • You will be responsible for defining scopes of work and developing both technical and contract specifications. • Your attention to detail will ensure the establishment and delivery of contractor Quality Assurance and Quality Control. • You will actively promote a culture of health, safety, environmental awareness and quality; seek out improvements in all these areas and directly contribute to their development, planning and delivery for Asset Support and Uniper. Your profile Essential • You will be educated to a Higher National Diploma or Degree level in a Control & Instrumentation related discipline, supported with a knowledge of engineering, project management and maintenance practices gained through experience. • You will be able to apply your good working knowledge of health, safety and environmental legislation and standards to IOSH Managing Safely/NEBOSH Certificate level or a recognised equivalent in a practical manner. • You will have a sound understanding of complex C&I process system operations, knowledge of current regulations and policy which affect the management and operations of process plant engineering assets. • You will have the ability to investigate issues, determine root cause and apply engineering resolutions to complex C&I process systems, demonstrating compliance to change management processes. • Your strong interpersonal skills will enable effective working relationships within the team, across business functions and with senior stakeholders. • Your communication, planning and organisational skills will enable effective task prioritisation and resource management. • You will have knowledge, understanding and be able to demonstrate application of project management tools and techniques. • Your organisational, contract and project management skills enable you to run a contract within a project or outage which involve on/off site working including the health, safety, environmental and quality aspects as well as the commercial and technical issues. • Full and clean UK driving license. Desirable • Functional Safety (IEC61508/61511) and/or Cyber Security for Industrial and Control Systems (OG86). • Use and knowledge of best practice lean tools for resolving engineering issues to root cause level. • Management, fault finding and troubleshooting of DCS and PLC systems. • Management of alarms and simulations. • Knowledge and competence of using SAP based systems. • Experience of working in a fast-paced environment. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: Salary: £53,000 - £77,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
C&I Project Engineer The Asset Support and Outage Excellence Team UK play a key role supporting power plant and gas storage projects, outages and maintenance activities across Uniper's UK and Swedish assets. The role is high-profile in helping to ensure security of supply and delivering Uniper's business strategy to accelerate the energy transition. We are looking for a Controls & Instrumentation (C&I) Projects Engineer to fulfil a discipline specific role. It is an exciting time to join the team, with the prospect for the right individual to work with a diverse mix of both established and new power plant and technology on advanced power stations and storage facilities. This is a tremendous opportunity, offering development and experience on a massive scale supporting assets and teams across power generation and storage stations. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities We are looking for people who can bring a flexible, enthusiastic approach, are highly self-motivated, conscientious and can demonstrate ownership of issues through to the implementation of solutions at any of our assets across the UK and Sweden. You will be capable of demonstrating and developing extensive knowledge and skills in a range of varied C&I engineering and maintenance work activities of a complex and non-routine nature in such a way as to maximise resource utilisation and station/facility availability. You must display capacity for individual responsibility, self-motivation and autonomy while demonstrating exemplary commitment to Uniper's HSSE and Quality culture. • Utilising your skills and experience to deliver projects and outages, identify and managing stakeholders across Uniper's functional organisation and with the supply chain, ensuring process and regulatory compliance with the highest standard of HSSE and Quality performance. • You will undertake proactive and reactive work, including fault finding, problem solving and investigations, across a broad range of process plant and systems in support of performance against Key Performance Indicators (safety, time, cost, quality, technical performance and compliance). • You will have the capability to lead project teams as required dependent on project complexity. • You will ensure best practice is employed and shared across Uniper sites by networking and benchmarking comparisons with plants, departments, engineers, industries and Uniper teams to achieve optimum levels of performance, revenue and capital expenditure. • You will be responsible for defining scopes of work and developing both technical and contract specifications. • Your attention to detail will ensure the establishment and delivery of contractor Quality Assurance and Quality Control. • You will actively promote a culture of health, safety, environmental awareness and quality; seek out improvements in all these areas and directly contribute to their development, planning and delivery for Asset Support and Uniper. Your profile Essential • You will be educated to a Higher National Diploma or Degree level in a Control & Instrumentation related discipline, supported with a knowledge of engineering, project management and maintenance practices gained through experience. • You will be able to apply your good working knowledge of health, safety and environmental legislation and standards to IOSH Managing Safely/NEBOSH Certificate level or a recognised equivalent in a practical manner. • You will have a sound understanding of complex C&I process system operations, knowledge of current regulations and policy which affect the management and operations of process plant engineering assets. • You will have the ability to investigate issues, determine root cause and apply engineering resolutions to complex C&I process systems, demonstrating compliance to change management processes. • Your strong interpersonal skills will enable effective working relationships within the team, across business functions and with senior stakeholders. • Your communication, planning and organisational skills will enable effective task prioritisation and resource management. • You will have knowledge, understanding and be able to demonstrate application of project management tools and techniques. • Your organisational, contract and project management skills enable you to run a contract within a project or outage which involve on/off site working including the health, safety, environmental and quality aspects as well as the commercial and technical issues. • Full and clean UK driving license. Desirable • Functional Safety (IEC61508/61511) and/or Cyber Security for Industrial and Control Systems (OG86). • Use and knowledge of best practice lean tools for resolving engineering issues to root cause level. • Management, fault finding and troubleshooting of DCS and PLC systems. • Management of alarms and simulations. • Knowledge and competence of using SAP based systems. • Experience of working in a fast-paced environment. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: Salary: £53,000 - £77,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
Sep 04, 2025
Full time
C&I Project Engineer The Asset Support and Outage Excellence Team UK play a key role supporting power plant and gas storage projects, outages and maintenance activities across Uniper's UK and Swedish assets. The role is high-profile in helping to ensure security of supply and delivering Uniper's business strategy to accelerate the energy transition. We are looking for a Controls & Instrumentation (C&I) Projects Engineer to fulfil a discipline specific role. It is an exciting time to join the team, with the prospect for the right individual to work with a diverse mix of both established and new power plant and technology on advanced power stations and storage facilities. This is a tremendous opportunity, offering development and experience on a massive scale supporting assets and teams across power generation and storage stations. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities We are looking for people who can bring a flexible, enthusiastic approach, are highly self-motivated, conscientious and can demonstrate ownership of issues through to the implementation of solutions at any of our assets across the UK and Sweden. You will be capable of demonstrating and developing extensive knowledge and skills in a range of varied C&I engineering and maintenance work activities of a complex and non-routine nature in such a way as to maximise resource utilisation and station/facility availability. You must display capacity for individual responsibility, self-motivation and autonomy while demonstrating exemplary commitment to Uniper's HSSE and Quality culture. • Utilising your skills and experience to deliver projects and outages, identify and managing stakeholders across Uniper's functional organisation and with the supply chain, ensuring process and regulatory compliance with the highest standard of HSSE and Quality performance. • You will undertake proactive and reactive work, including fault finding, problem solving and investigations, across a broad range of process plant and systems in support of performance against Key Performance Indicators (safety, time, cost, quality, technical performance and compliance). • You will have the capability to lead project teams as required dependent on project complexity. • You will ensure best practice is employed and shared across Uniper sites by networking and benchmarking comparisons with plants, departments, engineers, industries and Uniper teams to achieve optimum levels of performance, revenue and capital expenditure. • You will be responsible for defining scopes of work and developing both technical and contract specifications. • Your attention to detail will ensure the establishment and delivery of contractor Quality Assurance and Quality Control. • You will actively promote a culture of health, safety, environmental awareness and quality; seek out improvements in all these areas and directly contribute to their development, planning and delivery for Asset Support and Uniper. Your profile Essential • You will be educated to a Higher National Diploma or Degree level in a Control & Instrumentation related discipline, supported with a knowledge of engineering, project management and maintenance practices gained through experience. • You will be able to apply your good working knowledge of health, safety and environmental legislation and standards to IOSH Managing Safely/NEBOSH Certificate level or a recognised equivalent in a practical manner. • You will have a sound understanding of complex C&I process system operations, knowledge of current regulations and policy which affect the management and operations of process plant engineering assets. • You will have the ability to investigate issues, determine root cause and apply engineering resolutions to complex C&I process systems, demonstrating compliance to change management processes. • Your strong interpersonal skills will enable effective working relationships within the team, across business functions and with senior stakeholders. • Your communication, planning and organisational skills will enable effective task prioritisation and resource management. • You will have knowledge, understanding and be able to demonstrate application of project management tools and techniques. • Your organisational, contract and project management skills enable you to run a contract within a project or outage which involve on/off site working including the health, safety, environmental and quality aspects as well as the commercial and technical issues. • Full and clean UK driving license. Desirable • Functional Safety (IEC61508/61511) and/or Cyber Security for Industrial and Control Systems (OG86). • Use and knowledge of best practice lean tools for resolving engineering issues to root cause level. • Management, fault finding and troubleshooting of DCS and PLC systems. • Management of alarms and simulations. • Knowledge and competence of using SAP based systems. • Experience of working in a fast-paced environment. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: Salary: £53,000 - £77,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
Applications Engineer Are you an experienced Applications Engineer? Do you want to work for a world leader in their sector? Do you want career progression opportunities? If so, APPLY NOW! Due to continued expansion, we are recruiting an experienced Applications Engineer to join part of a friendly and collaborative team of like-minded people, assisting the Sales Department in the preparation of bids and contractual requirements. You will assist with the development of the product for our clients. Objective: To provide essential design and technical data for engineering, construction, and operations to enable our client to continue to provide efficient, safe, and cost-effective packaged designs and timely project execution. Responsibilities: Define Project Scope and Objectives Work alongside Sales and Process team to establish clear goals and design requirements for a particular project. Gather Basic Design Data Basic design data, process, and performance parameters. This maybe from review of client documentation or meetings with the client, be that face to face or via MS Teams, or handed over from Sales team. Process flow diagrams (PFDs) Flowcharts that describe the major processes and equipment, etc. These can be produced by you or, can be produced by CAD team, under your guidance and with the assistance of the Sales and Process Teams. Develop the Piping and Instrumentation Diagrams (P&IDs) Identify control systems, valves, and piping configurations. This will be a collaborative effort between the Process Team, Sales Team and you. Following this, prepare an equipment list. Material & Energy Balances Input-output relationships/efficiency of the process. This is the responsibly of the Process team, however, the ability to understand these will be a benefit. Design Equipment Specifications Define mechanical and operational details for the major equipment. This is a major part of this role. The ability to extract the correct requirements for a particular piece of equipment, prepare an enquiry to our suppliers, then scrutinize their quotations to ensure compliance with the project standards is very important. Provide feedback to various departments Include standards that must be met, operational best practices (e.g. Provide the Design team with any equipment installation requirements to include in the layout) and be proactive in taking any lessons learned forward to new projects. Prepare Documentation & Review Assemble the pack of completed information to hand over to the Project Managers when the project moves from a bid to a contract. Cost estimation (In-house and sub-suppliers quotations). Potentially attend bid clarification and offsite meetings with clients in a supporting role. Requirements: Degree in Chemical, Process, or Mechanical Engineering (BEng or MEng). Previous involvement in supporting packaged systems design. Ability to work both independently and collaboratively in a team-oriented environment. At least three years of relevant industry experience. Strong interpersonal skills with the ability to communicate effectively at all levels. Proven ability to prioritize and execute tasks efficiently in high-pressure situations. Commercial awareness and business acumen. Right to Work in the UK. Benefits: Comprehensive product training and full internal support. Hybrid working options. Generous holiday entitlement. Sick pay scheme. Performance-based bonus scheme. Long service recognition scheme. Pension scheme. Healthcare scheme. Annual inflationary salary review. Working hours: Flexible working arrangements. Salary: Competitive salary within a professional and supportive environment. This is a Full time, Permanent position.
Sep 04, 2025
Full time
Applications Engineer Are you an experienced Applications Engineer? Do you want to work for a world leader in their sector? Do you want career progression opportunities? If so, APPLY NOW! Due to continued expansion, we are recruiting an experienced Applications Engineer to join part of a friendly and collaborative team of like-minded people, assisting the Sales Department in the preparation of bids and contractual requirements. You will assist with the development of the product for our clients. Objective: To provide essential design and technical data for engineering, construction, and operations to enable our client to continue to provide efficient, safe, and cost-effective packaged designs and timely project execution. Responsibilities: Define Project Scope and Objectives Work alongside Sales and Process team to establish clear goals and design requirements for a particular project. Gather Basic Design Data Basic design data, process, and performance parameters. This maybe from review of client documentation or meetings with the client, be that face to face or via MS Teams, or handed over from Sales team. Process flow diagrams (PFDs) Flowcharts that describe the major processes and equipment, etc. These can be produced by you or, can be produced by CAD team, under your guidance and with the assistance of the Sales and Process Teams. Develop the Piping and Instrumentation Diagrams (P&IDs) Identify control systems, valves, and piping configurations. This will be a collaborative effort between the Process Team, Sales Team and you. Following this, prepare an equipment list. Material & Energy Balances Input-output relationships/efficiency of the process. This is the responsibly of the Process team, however, the ability to understand these will be a benefit. Design Equipment Specifications Define mechanical and operational details for the major equipment. This is a major part of this role. The ability to extract the correct requirements for a particular piece of equipment, prepare an enquiry to our suppliers, then scrutinize their quotations to ensure compliance with the project standards is very important. Provide feedback to various departments Include standards that must be met, operational best practices (e.g. Provide the Design team with any equipment installation requirements to include in the layout) and be proactive in taking any lessons learned forward to new projects. Prepare Documentation & Review Assemble the pack of completed information to hand over to the Project Managers when the project moves from a bid to a contract. Cost estimation (In-house and sub-suppliers quotations). Potentially attend bid clarification and offsite meetings with clients in a supporting role. Requirements: Degree in Chemical, Process, or Mechanical Engineering (BEng or MEng). Previous involvement in supporting packaged systems design. Ability to work both independently and collaboratively in a team-oriented environment. At least three years of relevant industry experience. Strong interpersonal skills with the ability to communicate effectively at all levels. Proven ability to prioritize and execute tasks efficiently in high-pressure situations. Commercial awareness and business acumen. Right to Work in the UK. Benefits: Comprehensive product training and full internal support. Hybrid working options. Generous holiday entitlement. Sick pay scheme. Performance-based bonus scheme. Long service recognition scheme. Pension scheme. Healthcare scheme. Annual inflationary salary review. Working hours: Flexible working arrangements. Salary: Competitive salary within a professional and supportive environment. This is a Full time, Permanent position.
Senior Control Systems Engineer A growing engineering and technology business based in High Wycombe is seeking a talented Control Systems Engineer to join their team. This is an exciting opportunity to work in a dynamic, research-driven environment developing and supporting bespoke high-tech equipment used in advanced material applications. The role offers a broad range of responsibilities, from maintaining and developing control systems software to supporting production and contributing to R&D initiatives. Key Responsibilities of Senior Control System Engineer: Maintain and update existing PC-based software Maintain and support PLC software (Mitsubishi preferred) Assist in the creation of system schematics and interlock designs Ensure safety and reliability of system controls Create and manage documentation for all software changes Provide fault-finding and technical troubleshooting support Collaborate with the sales team on technical matters Work alongside test and installation teams to ensure FAT documentation is up to date Contribute to R&D and new product development activities Requirements of the Senior Control System Engineer: Degree in engineering or science (or equivalent industry experience) Experience with industrial control software and electronics Familiarity with PC software development (VB.net preferred) PLC programming experience (ideally Mitsubishi) Strong fault-finding and problem-solving skills Self-motivated with a proactive and positive approach Desirable Skills: Experience working with scientific or technical instrumentation PCB design experience This is an excellent opportunity for someone looking to expand their experience in a hands-on, multi-disciplinary engineering environment. If you re passionate about control systems and want to be part of a forward-thinking team, we d love to hear from you. Apply now or get in touch for more information.
Sep 04, 2025
Full time
Senior Control Systems Engineer A growing engineering and technology business based in High Wycombe is seeking a talented Control Systems Engineer to join their team. This is an exciting opportunity to work in a dynamic, research-driven environment developing and supporting bespoke high-tech equipment used in advanced material applications. The role offers a broad range of responsibilities, from maintaining and developing control systems software to supporting production and contributing to R&D initiatives. Key Responsibilities of Senior Control System Engineer: Maintain and update existing PC-based software Maintain and support PLC software (Mitsubishi preferred) Assist in the creation of system schematics and interlock designs Ensure safety and reliability of system controls Create and manage documentation for all software changes Provide fault-finding and technical troubleshooting support Collaborate with the sales team on technical matters Work alongside test and installation teams to ensure FAT documentation is up to date Contribute to R&D and new product development activities Requirements of the Senior Control System Engineer: Degree in engineering or science (or equivalent industry experience) Experience with industrial control software and electronics Familiarity with PC software development (VB.net preferred) PLC programming experience (ideally Mitsubishi) Strong fault-finding and problem-solving skills Self-motivated with a proactive and positive approach Desirable Skills: Experience working with scientific or technical instrumentation PCB design experience This is an excellent opportunity for someone looking to expand their experience in a hands-on, multi-disciplinary engineering environment. If you re passionate about control systems and want to be part of a forward-thinking team, we d love to hear from you. Apply now or get in touch for more information.
Job Description Electrical Systems Engineer - Submarines Full Time / Hybrid Derby / Permanent We are seeking a highly skilled and motivated Electrical Systems Engineer to play a pivotal role in the development of the Rolls-Royce Advanced Modular Reactor (AMR) Electrical Power System. This is a unique opportunity to contribute to a cutting-edge nuclear programme, where you will be responsible for shaping the electrical architecture from concept through to implementation. Working within a dynamic and forward-thinking team, you will help define system requirements, oversee critical technology development, and engage with key stakeholders including regulators, suppliers, and customers. If you are driven by technical excellence and thrive in a highly regulated, safety-critical environment, we want to hear from you. The Novel Nuclear and Special Projects Electrical Control and Instrumentation (EC&I) Team are developing the Electrical Power System for the Rolls-Royce AMR and the Electrical System Architect will take a leading role in this development. As technology evolves, the hunger for secure energy grows with it. Our deployable Advanced Modular Reactors (AMRs) will provide off-grid power to data centres, defence locations, remote industries or communities and marine applications. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing To capture and agree relevant high-level electrical requirementsTo capture applicable design constraints and quality attributesTo translate requirements into an architecture for the Rolls-Royce AMR Electrical Power System, being cognisant of:Defence in depthSingle failure criteriaCommon cause failureBlack out conditionsLoss of power conditionsHazards (internal and external)To make design decisions relating to the electrical subsystemsTo define and oversee development of critical technologiesTo implement appropriate standards, regulations and best practice in the architecture for the Rolls-Royce AMR Electrical Power SystemTo carry out appropriate technical reviews and provide the required electrical engineering inputs to the project technical review gatesTo provide support to the broader EC&I Team and the wider Novel Nuclear and Special Projects area as requiredTo discuss the architecture for the AMR electrical systems with external organisations including the nuclear safety regulator, potential customers and suppliers Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Qualified to degree level or equivalent in Electrical Engineering or a related disciplineWorking knowledge of common electrical design codes, standards and processes. Knowledge of BS EN IEC 63046 and IEEE 15288 will be beneficialWorking knowledge of electrical power systems and componentsMembership of a professional engineering institution or working towards membershipExperience of working in the nuclear industry is desirable, experience within a regulated industry would be beneficialExperience in leading the development of design solutions from initial concept through to detailed design definition using a robust design process, including experience of trade-off studies to ensure an optimum design solution is producedExperience in planning and executing technical work packages and reporting progress as requiredExperience applying appropriate analysis methods to underpin concept definitions and support the justification of design solutions We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Job Category Electrical and Electronics Posting Date 27 Aug 2025; 00:08 Posting End Date PandoLogic.
Sep 03, 2025
Full time
Job Description Electrical Systems Engineer - Submarines Full Time / Hybrid Derby / Permanent We are seeking a highly skilled and motivated Electrical Systems Engineer to play a pivotal role in the development of the Rolls-Royce Advanced Modular Reactor (AMR) Electrical Power System. This is a unique opportunity to contribute to a cutting-edge nuclear programme, where you will be responsible for shaping the electrical architecture from concept through to implementation. Working within a dynamic and forward-thinking team, you will help define system requirements, oversee critical technology development, and engage with key stakeholders including regulators, suppliers, and customers. If you are driven by technical excellence and thrive in a highly regulated, safety-critical environment, we want to hear from you. The Novel Nuclear and Special Projects Electrical Control and Instrumentation (EC&I) Team are developing the Electrical Power System for the Rolls-Royce AMR and the Electrical System Architect will take a leading role in this development. As technology evolves, the hunger for secure energy grows with it. Our deployable Advanced Modular Reactors (AMRs) will provide off-grid power to data centres, defence locations, remote industries or communities and marine applications. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing To capture and agree relevant high-level electrical requirementsTo capture applicable design constraints and quality attributesTo translate requirements into an architecture for the Rolls-Royce AMR Electrical Power System, being cognisant of:Defence in depthSingle failure criteriaCommon cause failureBlack out conditionsLoss of power conditionsHazards (internal and external)To make design decisions relating to the electrical subsystemsTo define and oversee development of critical technologiesTo implement appropriate standards, regulations and best practice in the architecture for the Rolls-Royce AMR Electrical Power SystemTo carry out appropriate technical reviews and provide the required electrical engineering inputs to the project technical review gatesTo provide support to the broader EC&I Team and the wider Novel Nuclear and Special Projects area as requiredTo discuss the architecture for the AMR electrical systems with external organisations including the nuclear safety regulator, potential customers and suppliers Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Qualified to degree level or equivalent in Electrical Engineering or a related disciplineWorking knowledge of common electrical design codes, standards and processes. Knowledge of BS EN IEC 63046 and IEEE 15288 will be beneficialWorking knowledge of electrical power systems and componentsMembership of a professional engineering institution or working towards membershipExperience of working in the nuclear industry is desirable, experience within a regulated industry would be beneficialExperience in leading the development of design solutions from initial concept through to detailed design definition using a robust design process, including experience of trade-off studies to ensure an optimum design solution is producedExperience in planning and executing technical work packages and reporting progress as requiredExperience applying appropriate analysis methods to underpin concept definitions and support the justification of design solutions We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Job Category Electrical and Electronics Posting Date 27 Aug 2025; 00:08 Posting End Date PandoLogic.
About the Role A leading multidisciplinary engineering services provider is seeking an experienced EC&I Engineering Design Manager to oversee the delivery of electrical, control, and instrumentation design projects across a range of industrial sectors. This is a strategic leadership role, combining technical oversight with team management and client engagement. The successful candidate will play a key part in shaping project outcomes and driving engineering excellence across complex, high-value assignments. Key Responsibilities Lead and manage EC&I design activities across multiple projects, ensuring quality, compliance, and timely delivery Provide technical leadership and mentorship to a team of EC&I engineers and designers Oversee the preparation of design documentation, including drawings, specifications, and schedules Ensure designs meet relevant standards and regulations (e.g. BS7671, IEC, ATEX) Collaborate with project managers, clients, and other engineering disciplines to define scope and resolve technical challenges Support tendering and proposal development with accurate technical input and resource planning Conduct design reviews and ensure continuous improvement in design processes and outputs Maintain strong relationships with clients and stakeholders, acting as a key technical point of contact Candidate Requirements Degree in Electrical Engineering, Control & Instrumentation, or a related discipline Extensive experience in EC&I design within industrial or process environments Proven leadership experience in managing engineering teams and delivering design projects Strong understanding of applicable standards, safety regulations, and industry best practices Proficiency in design tools such as AutoCAD, EPLAN, or similar Excellent communication, organisational, and problem-solving skills Full UK driving licence and willingness to travel to client sites as required What's on Offer Competitive salary and benefits package Leadership role within a respected and stable organisation Opportunity to work on diverse, technically challenging projects Supportive team culture with a focus on innovation and professional development Long-term career progression opportunities Please Note: Applicants must have the right to work in the UK. Unfortunately, visa sponsorship is not available for this position. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Sep 03, 2025
Full time
About the Role A leading multidisciplinary engineering services provider is seeking an experienced EC&I Engineering Design Manager to oversee the delivery of electrical, control, and instrumentation design projects across a range of industrial sectors. This is a strategic leadership role, combining technical oversight with team management and client engagement. The successful candidate will play a key part in shaping project outcomes and driving engineering excellence across complex, high-value assignments. Key Responsibilities Lead and manage EC&I design activities across multiple projects, ensuring quality, compliance, and timely delivery Provide technical leadership and mentorship to a team of EC&I engineers and designers Oversee the preparation of design documentation, including drawings, specifications, and schedules Ensure designs meet relevant standards and regulations (e.g. BS7671, IEC, ATEX) Collaborate with project managers, clients, and other engineering disciplines to define scope and resolve technical challenges Support tendering and proposal development with accurate technical input and resource planning Conduct design reviews and ensure continuous improvement in design processes and outputs Maintain strong relationships with clients and stakeholders, acting as a key technical point of contact Candidate Requirements Degree in Electrical Engineering, Control & Instrumentation, or a related discipline Extensive experience in EC&I design within industrial or process environments Proven leadership experience in managing engineering teams and delivering design projects Strong understanding of applicable standards, safety regulations, and industry best practices Proficiency in design tools such as AutoCAD, EPLAN, or similar Excellent communication, organisational, and problem-solving skills Full UK driving licence and willingness to travel to client sites as required What's on Offer Competitive salary and benefits package Leadership role within a respected and stable organisation Opportunity to work on diverse, technically challenging projects Supportive team culture with a focus on innovation and professional development Long-term career progression opportunities Please Note: Applicants must have the right to work in the UK. Unfortunately, visa sponsorship is not available for this position. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 03, 2025
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 03, 2025
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Nuclear Restoration Services Limited (NRS) is a wholly owned subsidiary of the Nuclear Decommissioning Authority (NDA). NRS is responsible for decommissioning first generation nuclear power stations Berkeley, Bradwell, Chapelcross, Dungeness A, Hinkley Point A, Hunterston A, Oldbury, Sizewell A, Trawsfynydd and Wylfa, and research sites Harwell and Winfrith. NRS is also responsible for electricity generation at hydroelectric plant Maentwrog. As a division of NRS, NRS Dounreay is responsible for the clean-up and demolition of the former centre of fast reactor research and development. NRS is an exciting place to be, and this role is the perfect opportunity for you to be part of our challenging mission - to safely and successfully manage the UK's civil nuclear legacy on behalf of the nation. To deliver our commitment, we need people like you who want to perform at an industry leading standard and be part of a team that continues to develop, innovate and even exceed our greatest achievements. At NRS, we understand, and acknowledge the value of an inclusive working environment, and celebrate the diversity this brings to our workplace. Without this approach, we wouldn't be in the position that we are now, being able to safeguard and secure the future of our organisation. If you're part of the NDA Group, please refer to the Mobility Principles for guidance on how a move into NRS can be facilitated - visit What is Mobility at the NDA group? About the role Hear from the Hiring Manager: "My team is made up of experienced and skilled team players that excel at working in the nuclear industry. I would like to welcome an individual that can bring their knowledge, experience and skills and transfer them to further develop and enhance the safe delivery of the Magnox mission. We work a rotating 12 hour shift pattern of day and night shift comprising of 07.00-19.00 & 19.00-07.00 Monday to Friday over a 3 week cycle". Key Deliverables: Carry out routine maintenance tasks efficiently as directed by the Shift Engineer, Duty Shift Manager or Maintenance Manager. Undertake preventative planned maintenance activities as directed and in accordance with supplied maintenance instructions. Undertake corrective works where identified, including assistance with internal projects as appropriate. Undertake electrical installation activities in accordance with the design provided and IET Wiring Regulations. Respond to breakdowns and work with operations to ensure that maintenance and corrective works are completed safely and in a timely manner. Carry out a full and proper handover between shifts and in the absence of the shift engineer ensure that the shift engineers log is correct and updated in the aspects of your trade discipline. Support the effective deployment of company-wide policies, processes, systems and procedures ensuring that at all time the business remains compliant. Qualifications and Experience Qualified to IET Wiring Regulations - 18th Edition (BS7671) - Desirable Appropriate technical qualifications e.g. City & Guilds, BTEC, NVQ level 3 or equivalent - Desirable Knowledge and understanding of Ventilation systems. - Desirable Experience of electrical maintenance activities, general distribution and installation requirements - Essential Knowledge and experience of Electrical Systems - Essential Knowledge and experience of instrumentation, inverters, and control systems - Desirable Knowledge of Electricity at work Regulations - Desirable Experience of general maintenance within a nuclear environment - Desirable Able to be a classified radiation worker in accordance with Ionising Radiation Regulations - Essential Benefits Package Nuclear Restoration Services Limited (NRS) staff should refer to the document titled "Spot Point v Grade alignment" available on SharePoint for more information on how the grade structure aligns to Spot Points. Flexible working - where possible. The equivalent of 25 days (185 hours per year) annual leave plus Public Holidays (59.2 hours per year). This increases by 2 days (14.8 hours per year) annual leave after two full calendar years of service (as at 5th January in the leave year) , and an additional 3 days (22.2 hours per year) annual leave after five full calendar years of service (as at 5th January in the leave year). You also have the option to buy or sell the equivalent of 5 days (37 hours) annual leave each year (available in specific windows for the following holiday year). For the purpose of assessing an employee's annual leave entitlement, a day means seven and two fifths (7.4) hours. A pro rata entitlement will apply for part time workers. Flexible benefits scheme - including cycle to work and reduced gym membership fees. Participation in our Company Bonus Scheme (up to £5,750 per annum based on corporate objectives). Employee Assistance Programme including 24-hour telephone support & personal assistance service and access to an online wellbeing App. Up to 13.5% employer pension contribution depending on individual contribution amount. Enhanced maternity and paternity pay (dependent on service). Access to training and development through the company performance management arrangements, supporting you in maintaining your personal Continuous Professional Development. We have various different employee networks supporting our inclusion, diversity and wellbeing mission at Nuclear Restoration Services Limited (NRS). Additional Information Please be aware this role holder requires security clearance, or the ability to obtain said clearance. There is a requirement to live within a commutable distance to the sites where the role is based. For central/multi-site roles, we have various hubs across the UK and can be flexible with base location. We value the unique differences that each of our colleagues bring to work every day and are committed to creating an environment where everyone feels respected, included and able to perform at their best. At Nuclear Restoration Services Limited (NRS), we are committed to creating a workplace that is diverse and inclusive, we therefore particularly welcome applications from Women, Black, Asian and Ethnic Minorities, LGBT+ and candidates with a disability as they are all underrepresented in our workforce. We are happy to talk flexible working where possible.
Sep 03, 2025
Full time
Nuclear Restoration Services Limited (NRS) is a wholly owned subsidiary of the Nuclear Decommissioning Authority (NDA). NRS is responsible for decommissioning first generation nuclear power stations Berkeley, Bradwell, Chapelcross, Dungeness A, Hinkley Point A, Hunterston A, Oldbury, Sizewell A, Trawsfynydd and Wylfa, and research sites Harwell and Winfrith. NRS is also responsible for electricity generation at hydroelectric plant Maentwrog. As a division of NRS, NRS Dounreay is responsible for the clean-up and demolition of the former centre of fast reactor research and development. NRS is an exciting place to be, and this role is the perfect opportunity for you to be part of our challenging mission - to safely and successfully manage the UK's civil nuclear legacy on behalf of the nation. To deliver our commitment, we need people like you who want to perform at an industry leading standard and be part of a team that continues to develop, innovate and even exceed our greatest achievements. At NRS, we understand, and acknowledge the value of an inclusive working environment, and celebrate the diversity this brings to our workplace. Without this approach, we wouldn't be in the position that we are now, being able to safeguard and secure the future of our organisation. If you're part of the NDA Group, please refer to the Mobility Principles for guidance on how a move into NRS can be facilitated - visit What is Mobility at the NDA group? About the role Hear from the Hiring Manager: "My team is made up of experienced and skilled team players that excel at working in the nuclear industry. I would like to welcome an individual that can bring their knowledge, experience and skills and transfer them to further develop and enhance the safe delivery of the Magnox mission. We work a rotating 12 hour shift pattern of day and night shift comprising of 07.00-19.00 & 19.00-07.00 Monday to Friday over a 3 week cycle". Key Deliverables: Carry out routine maintenance tasks efficiently as directed by the Shift Engineer, Duty Shift Manager or Maintenance Manager. Undertake preventative planned maintenance activities as directed and in accordance with supplied maintenance instructions. Undertake corrective works where identified, including assistance with internal projects as appropriate. Undertake electrical installation activities in accordance with the design provided and IET Wiring Regulations. Respond to breakdowns and work with operations to ensure that maintenance and corrective works are completed safely and in a timely manner. Carry out a full and proper handover between shifts and in the absence of the shift engineer ensure that the shift engineers log is correct and updated in the aspects of your trade discipline. Support the effective deployment of company-wide policies, processes, systems and procedures ensuring that at all time the business remains compliant. Qualifications and Experience Qualified to IET Wiring Regulations - 18th Edition (BS7671) - Desirable Appropriate technical qualifications e.g. City & Guilds, BTEC, NVQ level 3 or equivalent - Desirable Knowledge and understanding of Ventilation systems. - Desirable Experience of electrical maintenance activities, general distribution and installation requirements - Essential Knowledge and experience of Electrical Systems - Essential Knowledge and experience of instrumentation, inverters, and control systems - Desirable Knowledge of Electricity at work Regulations - Desirable Experience of general maintenance within a nuclear environment - Desirable Able to be a classified radiation worker in accordance with Ionising Radiation Regulations - Essential Benefits Package Nuclear Restoration Services Limited (NRS) staff should refer to the document titled "Spot Point v Grade alignment" available on SharePoint for more information on how the grade structure aligns to Spot Points. Flexible working - where possible. The equivalent of 25 days (185 hours per year) annual leave plus Public Holidays (59.2 hours per year). This increases by 2 days (14.8 hours per year) annual leave after two full calendar years of service (as at 5th January in the leave year) , and an additional 3 days (22.2 hours per year) annual leave after five full calendar years of service (as at 5th January in the leave year). You also have the option to buy or sell the equivalent of 5 days (37 hours) annual leave each year (available in specific windows for the following holiday year). For the purpose of assessing an employee's annual leave entitlement, a day means seven and two fifths (7.4) hours. A pro rata entitlement will apply for part time workers. Flexible benefits scheme - including cycle to work and reduced gym membership fees. Participation in our Company Bonus Scheme (up to £5,750 per annum based on corporate objectives). Employee Assistance Programme including 24-hour telephone support & personal assistance service and access to an online wellbeing App. Up to 13.5% employer pension contribution depending on individual contribution amount. Enhanced maternity and paternity pay (dependent on service). Access to training and development through the company performance management arrangements, supporting you in maintaining your personal Continuous Professional Development. We have various different employee networks supporting our inclusion, diversity and wellbeing mission at Nuclear Restoration Services Limited (NRS). Additional Information Please be aware this role holder requires security clearance, or the ability to obtain said clearance. There is a requirement to live within a commutable distance to the sites where the role is based. For central/multi-site roles, we have various hubs across the UK and can be flexible with base location. We value the unique differences that each of our colleagues bring to work every day and are committed to creating an environment where everyone feels respected, included and able to perform at their best. At Nuclear Restoration Services Limited (NRS), we are committed to creating a workplace that is diverse and inclusive, we therefore particularly welcome applications from Women, Black, Asian and Ethnic Minorities, LGBT+ and candidates with a disability as they are all underrepresented in our workforce. We are happy to talk flexible working where possible.
A t WorkLyf Group, we are looking for a Senior Electrical Engineer (EC+I) for our global client based in Warrington. Primary Responsibilities Electrical Design, Engineering & Instrumentation of process plants within the food, beverage, personal care & homecare industries. Duties to include but not limited to: Engineering specifications for electrical control panels, instrumentation and electrical ins click apply for full job details
Sep 03, 2025
Full time
A t WorkLyf Group, we are looking for a Senior Electrical Engineer (EC+I) for our global client based in Warrington. Primary Responsibilities Electrical Design, Engineering & Instrumentation of process plants within the food, beverage, personal care & homecare industries. Duties to include but not limited to: Engineering specifications for electrical control panels, instrumentation and electrical ins click apply for full job details
Job Title: Electrical Commissioning Engineer (Weapons) Location: Barrow-In-Furness (On-site) Salary: From £35,802 + Depending on your skills and experience What you'll be doing: You'll be responsible for initial power of equipment and setting into work and into integration with the rest of the platform Acquire equipment from the build team where you will start initial testing You will also have the responsibility of conducting safe testing of equipment and operations Working together with other team members towards one common goal while collaborating with stakeholders Creating test documentation and aligning systems with build programme Your skills and experiences: HNC/HND or equivalent in related discipline or STEM subject Experience with combat systems Knowledge of safety controls & procedures in a high-risk environment Demonstrable experience of Instrumentation Systems including Electrostatic Discharge, Low Voltage Control, Data Communications & Fibre Optics Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Test & Commissioning Team: You will be part of a team responsible for commissioning the first of class Combat System and Tactical Weapons System on the next generation of Dreadnought submarines, working on equipment that is at the forefront of technology and the enhancement of already used systems. You will be surrounded by colleagues at different levels, who are available to provide support to ensure you are set up for success in your new role with us. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 03, 2025
Full time
Job Title: Electrical Commissioning Engineer (Weapons) Location: Barrow-In-Furness (On-site) Salary: From £35,802 + Depending on your skills and experience What you'll be doing: You'll be responsible for initial power of equipment and setting into work and into integration with the rest of the platform Acquire equipment from the build team where you will start initial testing You will also have the responsibility of conducting safe testing of equipment and operations Working together with other team members towards one common goal while collaborating with stakeholders Creating test documentation and aligning systems with build programme Your skills and experiences: HNC/HND or equivalent in related discipline or STEM subject Experience with combat systems Knowledge of safety controls & procedures in a high-risk environment Demonstrable experience of Instrumentation Systems including Electrostatic Discharge, Low Voltage Control, Data Communications & Fibre Optics Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Test & Commissioning Team: You will be part of a team responsible for commissioning the first of class Combat System and Tactical Weapons System on the next generation of Dreadnought submarines, working on equipment that is at the forefront of technology and the enhancement of already used systems. You will be surrounded by colleagues at different levels, who are available to provide support to ensure you are set up for success in your new role with us. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 03, 2025
Full time
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
