1071 jobs found

Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Engineering Manager - Electrical Systems Location: Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), 1 day a week(Filton) dependent on business needs, also a requirement to visit other sites in the UK on a regular basis) Salary: Up to £61,967 (Commensurate with skills and experience) What you'll be doing: Leading & managing an engineering team to deliver the functional design and definition of Electrical Power Systems equipment Managing the processes and reviews of technical documentation Managing associated technical risks, assumptions and dependencies Providing advice on electrical power technical aspects across a broad range of engineering disciplines Engaging with customers and suppliers to provide solutions to complex problems Taking a leading role by guiding the team through the systems definition process Providing leadership and mentoring of more junior team members to ensure the necessary capability and skills development Your skills and experiences: Essential Chartership or working (or prepared to work) towards Engineering degree or HND with substantial experience in Electrical Engineering design / development Experience of design / development of power systems (concept through to detailed design) Significant knowledge of AC and DC electrical power systems Strong analytical and problem solving skills Team Leadership experience Desirable Knowledge of defence standards Experience of Marine Electrical Systems Experience of working with engineering life cycle Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Electrical Power Systems Definition team: Working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States you will be part of the Electrical Power team who are responsible for leading a team of engineers in defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. This role will provide you with an opportunity to travel to various locations throughout the UK, including various BAE, customer and supplier sites. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Design Authoriser Location: Primarily Broughton (Filton possible); hybrid working (minimum 60% onsite) Working Hours: 35 hours per week, over 4.5 days Contract: 12 months (Inside IR35) Pay Rate: up to 52 per hour (Via an Umbrella Company) Overview: This role sits within a fast-paced engineering team supporting wing component delivery. The team provides technical solutions to support manufacturing, improve production efficiency, and ensure product integrity. The Design Authoriser will lead design investigations, approve modifications, and ensure compliance with airworthiness and safety standards. Key Responsibilities: Lead and authorise design solutions, including structural and systems modifications. Provide technical leadership and mentoring within the engineering team. Ensure integration of design solutions across functions and projects. Drive continuous improvement in design processes and team efficiency. Collaborate with stakeholders to support certification and configuration management. Requirements: Recognised design signatory (Design Approval/Authorisation). Strong problem-solving and communication skills. Ability to work independently and within a team. Experience in managing complex technical issues and delivering to time, cost, and quality. Innovative mindset with a focus on continuous improvement If you are interested, please apply now and a recruiter will contact you within 48 hours. This vacancy is being advertised by Belcan

The Job The Company: This is a great opportunity to join a recognised company who are market leaders within Excavation Support and Temporary Works, All Design and Manufacture for the provision of modular and bespoke excavation support systems is done in house. Well regarded for their personal and high level of customer service. Professional and forward thinking company that invests in their employees personal development great place to develop a career. Technical Sales Representative As a Technical Sales Representative, you will be responsible for supplying excavation supports to civil contractors, ground workers, and end users throughout the Berkshire, Hampshire and Surrey regions. The Technical Sales Representative will focus on maintaining and developing relationships with well-established customers while also driving new business opportunities. In this role, the Technical Sales Representative will provide Design Request Forms to support temporary works designs. Additionally, the Technical Sales Representative will manage appointments and schedules efficiently through strategic planning and time management. To ensure seamless operations, the Technical Sales Representative will liaise with internal staff within the Depots and Design teams, guaranteeing timely product delivery. Benefits of the Technical Sales Representative £40,000-£45,000 Basic Salary Uncapped Commission Company Car+ Fuel OR Car Allowance Pension Life Assurance 22 days + Bank Holidays (increases with service) Discretionary Company Performance Bonus The Ideal Person for the Technical Sales Representative The ideal candidate will be an experienced area sales manager/technical sales/field sales representative. Ideally you will have sold a construction product to main contractors and groundworkers on site. The ideal Technical Sales Representative will be hungry, tenacious, and can build relationships over a period of time You will want to build a career and develop with the company. Must have a full driving licence If you think the role of Technical Sales Representative is for you, apply now! Consultant: Sarah Dimmock Email: (url removed) Tel no. (phone number removed) Candidates must be eligible to work and live in the UK. At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.

Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Software Documentation Officer 12 month contract Based in Bristol Offering circa 65ph Inside IR35 Do you have experience with formal safety software? Do you have an understanding of the Software Engineering lifecycle? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Software Documentation Officer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Assist our software development teams with planning, documentation, configuration, and delivery Providing software input and configuration management Supporting multiple programmes Directly interfacing with software engineers and project leaders Supporting internal customer teams, such as Test and lab custodians Supporting the delivery of Integration deliverables Your skillset may include: Experience of software process in high-reliability, safety, or regulated sectors Experience of Software Engineering Lifecycle Knowledge of Project Management principles If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Software Documentation Officer 12 month contract Based in Bristol Offering circa 65ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

CNC Programmer Job Type: Full time Start Date: ASAP Duration: Permanent Location: Derby Salary: 40,000 per annum Sector: Aerospace We're seeking a forward-thinking CNC Programmer to join our client's high-performance team at their Derby facility. As the CNC Programmer you'll contribute to the production of complex aerospace components that power the future of flight. Reporting to the Team Leader, the CNC Programmer role will be responsible for programming, setting, and operating CNC machines within our Metallic Machine Shop. You will work over a two-shift pattern, Monday to Friday, producing high-precision components in a fast-paced environment at the site in Derby. The CNC Programmer role requires close collaboration with design, engineering, and production teams to ensure the highest quality standards and rapid turnaround times are achieved. Duties and Responsibilities: Create and optimise CNC programs using CAD/CAM software. Set and operate multi-axis CNC milling machines for high-tolerance manufacturing. Select appropriate cutting tools, speeds, and feeds to maximise efficiency and quality. Work to extremely tight tolerances, meeting stringent Aerospace specifications. Conduct in-process inspections using precision measuring equipment (micrometres, gauges, etc.). Maintain high attention to detail to minimise scrap and rework. Collaborate with design engineers and production teams to improve manufacturability (DFM). Identify and implement process improvements to reduce cycle times and boost productivity. Support the introduction of new materials and machining techniques. Perform routine maintenance on CNC machinery to ensure optimal performance. Adhere to all health, safety, and environmental regulations. Maintain a clean and organised work space in line with 5S principles. Qualifications, Experience and Attributes Required: Proven experience as a CNC Programmer / Machinist in a high-performance engineering environment (preferably Aerospace, Motorsport, or Precision Engineering). Proficient in EdgeCam, ISO or Fanuc controls Strong knowledge of 5-axis CNC milling Ability to interpret complex engineering drawings and GD&T Skilled in tooling selection, cutting strategies, and machining parameters for exotic materials Excellent problem-solving skills and attention to detail Capable of working under pressure and to tight deadlines Strong communication and teamwork skills Self-motivated with the ability to work independently Work Pattern: Full time, 39 hours per week Day Shift (8am-5pm Mon-Thurs, 8am-1pm Fri) Benefits of the Role: Competitive salary and benefits package Professional development and training opportunities A supportive team environment focused on innovation and excellence The opportunity to contribute to cutting-edge aerospace programs 40,000 per annum salary About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance, and engineering companies. If you are interested in hearing more about the CNC Programmer role, please contact Josh on (phone number removed).

Job Title: Engineering Manager - Electrical Systems Location: Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), 1 day a week(Filton) dependent on business needs, also a requirement to visit other sites in the UK on a regular basis) Salary: Up to £61,967 (Commensurate with skills and experience) What you'll be doing: Leading & managing an engineering team to deliver the functional design and definition of Electrical Power Systems equipment Managing the processes and reviews of technical documentation Managing associated technical risks, assumptions and dependencies Providing advice on electrical power technical aspects across a broad range of engineering disciplines Engaging with customers and suppliers to provide solutions to complex problems Taking a leading role by guiding the team through the systems definition process Providing leadership and mentoring of more junior team members to ensure the necessary capability and skills development Your skills and experiences: Essential Chartership or working (or prepared to work) towards Engineering degree or HND with substantial experience in Electrical Engineering design / development Experience of design / development of power systems (concept through to detailed design) Significant knowledge of AC and DC electrical power systems Strong analytical and problem solving skills Team Leadership experience Desirable Knowledge of defence standards Experience of Marine Electrical Systems Experience of working with engineering life cycle Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Electrical Power Systems Definition team: Working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States you will be part of the Electrical Power team who are responsible for leading a team of engineers in defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. This role will provide you with an opportunity to travel to various locations throughout the UK, including various BAE, customer and supplier sites. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Engineer, Site Engineering Authority Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive (Dependent of skills and experience) What you'll be doing: Acting as Engineering Authority for your prescribed area, covering all buildings and assets, providing independent engineering governance and assurance across all assets within your area Providing technical and specialist engineering advice & support to the maintenance, operations & project teams Producing / approving engineering functional requirements, accept design solutions, maintain engineering oversight, validate engineering integrity Protecting and maintaining engineering baseline for all accepted assets and infrastructure within your prescribed are, including configuration management and change control Development, management and control of planned maintenance schedules & approval of any maintenance concessions Providing Engineering governance and assurance for all projects within your area throughout the full lifecycle of the project, from requirements capture to handover, including a role as Design Review Chairperson Providing an asset risk management capability and support a risk-based investment prioritisation and decision-making process for all asset related investments Asset Management delivery - development and maintenance of asset management plans for key assets to ensure they can deliver the current and future boat programme requirements Engineering advice and support to equipment breakdowns and supporting / leading recovery activities Your skills and experiences: Essential Degree level qualified (in a relevant Engineering or Science discipline) or sufficient relevant experience to become a Chartered Engineer Have experience with Asset Management and Facilities Management Desirable Experience with Management of Nuclear classified systems including but not limited to Design, Operation and/or Modifications Experience in related industry such as; Nuclear, Oil and Gas etc. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Site Engineering team: An exciting opportunity to join us as a Principal Engineer, where you will be providing engineering assurance across the site within projects, process and operations. Site & Facilities Engineering are a dedicated Engineering team that provides technical and engineering oversight, advice and leadership to site wide fixed asset to support the boat build programme by ensuring the facilities, infrastructure and assets are available and performing when required. The team act as a verification function, ensuring that work is compliant with statutory requirements, site license conditions and business processes. The team are supported by specialist engineering teams and other specialists throughout the business to support decision making. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 16th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. Are you ready to shape the future of noise and acoustics for Data Centres projects across Europe? If you're an acoustics expert ready to lead, innovate, and make a real impact then please read on. Black & White Engineering is hiring a Senior Acoustics Engineer to pioneer a brand-new department focused on external noise control for data centres, if you haven't worked on data centre projects previously then you will be able to use your previous experience of complex commercial building projects. This isn't just another engineering role. You'll be at the forefront of designing solutions that meet global noise regulations, using industry-standard tools like SoundPLAN and CadnaA. From modelling layouts to advising on acoustic louvres and perimeter walls, your work will directly influence how major data centre projects come to life. What's in it for you? Build and lead your team, not just in UK but also in our offices in Manila. Fast-track to Principal or Director-level Collaborate with top-tier clients and consultants Be the go-to expert in a niche, high-impact field Work from our offices in Manchester, Edinburgh, or Newcastle - no London commute! We operate a 3 days per week in office hybrid working model. In addition, you will be joining a community that focuses on learning and development through regular lunch and learn sessions, investment in accredited professional courses or educational programmes. you can set the pace for your professional development, and whatever path you choose, you will receive relevant support. Essential skills: Previous relevant experience in building acoustic modelling and design Collaborative approach to innovative solutions Able to gain the best from the team around you and recognising their achievements. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Ready to take the lead? Apply now and let's build something extraordinary together.

Bedford or Dartford Multi-Site Leadership We are representing a leading engineering and Hire business looking for a Regional Operations Manager to take charge of a high-performing network of branches across the South East. This senior role carries full accountability for multi-site operations, P&L performance, and the leadership of Branch Managers. With responsibility for 4 5 locations, £60m turnover, and a team of Branch Managers reporting directly, you ll be at the forefront of driving service delivery, operational improvements, and sustainable growth. Key Duties & Responsibilities: Lead and mentor Branch Managers across multiple sites, ensuring operational and financial targets are achieved Take ownership of regional P&L performance, driving revenue growth and controlling costs Oversee day-to-day branch operations, ensuring consistency, efficiency, and compliance across the network Champion SHEQ standards, maintaining ISO and regulatory compliance while embedding a culture of safety and accountability Provide guidance on HR matters including performance, disciplinaries, recruitment, and succession planning Drive operational excellence by sharing best practices across branches and encouraging continuous improvement Build strong relationships with customers and stakeholders, supporting business development and contract mobilisation Report performance and regional updates to the UK Operations Director, contributing to board-level insight and planning This is a hands-on leadership role that blends operational control, financial responsibility, and people management. Highly visible across the region, you ll ensure every site hits its targets, maintains the highest safety standards, and delivers consistent service excellence. You will play a key part in change management, contract mobilisation, and cross-functional collaboration. Skills & Experience Required: Proven experience managing multi-site operations at regional or senior level Strong background in Plant Hire, water utilities, construction, or related industries Track record of leading managers and developing high-performing teams Financially astute with extensive P&L and budget management experience Experienced in change management and embedding continuous improvement In-depth understanding of health, safety, environmental and quality standards; IOSH or NEBOSH is advantageous Strong HR capability, confident in handling employee relations and people issues Excellent stakeholder management and communication skills Full UK driving licence with flexibility to travel across branches (Bedford, Dartford, Bracknell, Great Yarmouth, London) Summary: Position: Regional Operations Manager Location: Bedford, or Dartford with regular regional travel Type: Permanent, full-time Pay: £85,000 - £90,000 includes Bonus + Company Car + Bupa Private Medical Insurance + Benefits Start: Notice dependent This is a career-defining opportunity for a proven senior operations leader to take ownership of a large, high-value region within a respected national business. If you have mix of multi-site management, financial control, and people leadership we d like to hear from you! Apply now or contact the Kiota team for more details.

Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. Are you ready to shape the future of noise and acoustics for Data Centres projects across Europe? If you're an acoustics expert ready to lead, innovate, and make a real impact then please read on. Black & White Engineering is hiring a Senior Acoustics Engineer to pioneer a brand-new department focused on external noise control for data centres, if you haven't worked on data centre projects previously then you will be able to use your previous experience of complex commercial building projects. This isn't just another engineering role. You'll be at the forefront of designing solutions that meet global noise regulations, using industry-standard tools like SoundPLAN and CadnaA. From modelling layouts to advising on acoustic louvres and perimeter walls, your work will directly influence how major data centre projects come to life. What's in it for you? Build and lead your team, not just in UK but also in our offices in Manila. Fast-track to Principal or Director-level Collaborate with top-tier clients and consultants Be the go-to expert in a niche, high-impact field Work from our offices in Manchester, Edinburgh, or Newcastle - no London commute! We operate a 3 days per week in office hybrid working model. In addition, you will be joining a community that focuses on learning and development through regular lunch and learn sessions, investment in accredited professional courses or educational programmes. you can set the pace for your professional development, and whatever path you choose, you will receive relevant support. Essential skills: Previous relevant experience in building acoustic modelling and design Collaborative approach to innovative solutions Able to gain the best from the team around you and recognising their achievements. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Ready to take the lead? Apply now and let's build something extraordinary together.

Job title: Principal Engineer - Electrical Engineering (Power) Location: Coventry. (Hybrid - 1 day a week / 1 day a fortnight on site) Dependent on business needs. Salary: Up to £61,500 (Commensurate with skills and experience) What you'll be doing: Design and develop solutions to a range of common design situations/problems using NX Understand and apply a range of fundamental design processes, tools, systems and techniques Develop and produce ways of working within NX to provide design intent Work as a member of a multi-functional team created to accomplish tasks (e.g. Capgemini, Siemens, IBM and SSNA) Begin to schedule own work to meet target time scales and budget demand using tools and techniques with guidance from their supervisor Continually seek ways to improve, processes, toolsets, systems, techniques and the generic workplace Take an active role in high risk and high complexity tasks with low-risk involvement, supported by the project leader or equivalent Your skills and experiences: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Experience of working within a relevant Engineering role to industry codes and standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Coventry team: The team supports the Engineering Manager and external specialists during development and analysis of platform power systems. The Principal Engineer shall act as team lead, managing the day-to-day activities of the team and the production of deliverables. The Principal Engineer shall be responsible for developing and maintaining the competency and skills of the team, project plan and schedule project activities, while managing the resolution of any related issues. We offer relocation packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. Are you ready to shape the future of noise and acoustics for Data Centres projects across Europe? If you're an acoustics expert ready to lead, innovate, and make a real impact then please read on. Black & White Engineering is hiring a Senior Acoustics Engineer to pioneer a brand-new department focused on external noise control for data centres, if you haven't worked on data centre projects previously then you will be able to use your previous experience of complex commercial building projects. This isn't just another engineering role. You'll be at the forefront of designing solutions that meet global noise regulations, using industry-standard tools like SoundPLAN and CadnaA. From modelling layouts to advising on acoustic louvres and perimeter walls, your work will directly influence how major data centre projects come to life. What's in it for you? Build and lead your team, not just in UK but also in our offices in Manila. Fast-track to Principal or Director-level Collaborate with top-tier clients and consultants Be the go-to expert in a niche, high-impact field Work from our offices in Manchester, Edinburgh, or Newcastle - no London commute! We operate a 3 days per week in office hybrid working model. In addition, you will be joining a community that focuses on learning and development through regular lunch and learn sessions, investment in accredited professional courses or educational programmes. you can set the pace for your professional development, and whatever path you choose, you will receive relevant support. Essential skills: Previous relevant experience in building acoustic modelling and design Collaborative approach to innovative solutions Able to gain the best from the team around you and recognising their achievements. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Ready to take the lead? Apply now and let's build something extraordinary together.

About us Salary - Competitive Work Type - Hybrid Job Location - Lingley Mere (UU), Lingley Green Avenue, Great Sankey, Warrington, WA5 3LP Role Type - Permanent Employment Type - Full Time Working Hours - 37.0 Hours per Week United Utilities' (UU) purpose is to deliver great water for a stronger, greener and healthier North West of England. We are committed to providing our services in a way that respects the environment, supports the economy, and benefits society. We value diversity, inclusion and innovation in our workplace, and we foster a culture where our people can grow, excel, and be themselves. We uphold our ethics, values and business model to fulfil our mission and, by setting clear goals and objectives, we create sustainable long-term value for our colleagues, customers and communities. Whether you work with a team that shares your vision or join a network of peers with similar interests, you will find a welcoming and supportive organisation to be part of. We've got a lot to offer. You'll be part of a thriving FTSE 100 company and will enjoy a range of core benefits that reflect your value and value contribution. Benefits A generous annual leave package of 26 days, which increases to 30 days after four years of service (increases one day per year), in addition to 8 bank holidays A competitive pension scheme with up to 14% employer contribution, 21% combined, and life cover Up to 10.5% performance-related bonus scheme, as well as recognition awards for outstanding achievements A comprehensive healthcare plan through our company-funded scheme MyGymDiscounts - gym and wellness benefit that offers up to 25% off on gym memberships and digital fitness subscriptions Best Doctors Salary Finance Wealth at Work courses Deals and discounts EVolve Car Scheme Employee Assistance Plan Mental health first aiders ShareBuy MORE Choices flexible benefits Enhanced parental leave schemes Job Purpose As a Senior Process Safety Engineer, you will support us in driving our 'get home safe and well' strategy which is the heart of our business. Safety is absolutely paramount in everything we do and so we are looking for a Senior Process Safety Engineer to drive our strategy across our North West sites making industry best practice into reality. The key purpose of this role will be the implementation and ongoing embedment of the Process Safety Management Framework to support the reduction of incidents, you will be required to assure the implementation of this framework and drive compliance. This is an exciting and varied role which will see you investigating incidents, engaging and collaborating with operational areas to understand key risks and support with management and mitigation, provide Process Safety subject matter expertise. You will have full autonomy to create structured plans to drive compliance and performance improvements across the organisation. Because of the nature of our business you will need to have an appreciation of water industry regulatory standards and awareness of of health and safety risks on water treatment plants such as chemical treatment and mechanical engineering. As this role will require site visits across the North West a driving licence is essential. This role may not be available for sponsorship We're really excited about this opportunity and may have to close the advert early if we receive a lot of interest so if you're keen, we'd love to hear from you sooner rather than later. Accountabilities & Responsibilities Build and maintain relationships with the Business leaders, Managers and other employees that you support to ensure embedment of the Process Safety Management Framework across the operational area you support. Provide Process Safety technical guidance, advice and support to those working on our behalf, with a particular focus on Operation teams, Asset Management, Maintenance and Engineering technical functions. Risk management across United Utilities High Hazard facilities, through facilitating process hazard identification and review, consequence modelling and subsequent risk assessments. Lead on accident and incident investigations with the support of the relevant managers and ensure root cause is identified and corrective and preventive measures tracked and communicated. Pro-actively review and identify trends in Process Safety Performance through data trending and incident root causes, making proposal and advising senior leadership on a company response to these trends. Management of external regulatory interactions including the proactive preparation for COMAH competent authority inspections and subsequent support to the organisation on delivery of actions and commitments. Technical Skills & Experience Experience working in High Hazard environments associated with explosive atmospheres and toxic gasses. Knowledge of process safety principles, theory, and experience in application and implementation. Experience in the management of Methane, Hydrogen, and Toxic gases would be preferable. Knowledge of H&S management systems and environmental regulatory requirements. Experience working with external regulators Possess and be able to generate confidence internally and externally as a SME on regulatory and technical issues pertaining to process safety Strong leadership and people management skills with the ability to influence and persuade strategic decisions at a senior level (including executive directors) Experience of working within a unionised environment and having forged strong partnerships. Qualifications Degree level educated (Engineering discipline preferred). Working towards or having recently obtained a post-graduate qualification (e.g. chartered status). Other We rely on every emplo

Job title: Principal Engineer - Electrical Engineering (Power) Location: Coventry. (Hybrid - 1 day a week / 1 day a fortnight on site) Dependent on business needs. Salary: Up to £61,500 (Commensurate with skills and experience) What you'll be doing: Design and develop solutions to a range of common design situations/problems using NX Understand and apply a range of fundamental design processes, tools, systems and techniques Develop and produce ways of working within NX to provide design intent Work as a member of a multi-functional team created to accomplish tasks (e.g. Capgemini, Siemens, IBM and SSNA) Begin to schedule own work to meet target time scales and budget demand using tools and techniques with guidance from their supervisor Continually seek ways to improve, processes, toolsets, systems, techniques and the generic workplace Take an active role in high risk and high complexity tasks with low-risk involvement, supported by the project leader or equivalent Your skills and experiences: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Experience of working within a relevant Engineering role to industry codes and standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Coventry team: The team supports the Engineering Manager and external specialists during development and analysis of platform power systems. The Principal Engineer shall act as team lead, managing the day-to-day activities of the team and the production of deliverables. The Principal Engineer shall be responsible for developing and maintaining the competency and skills of the team, project plan and schedule project activities, while managing the resolution of any related issues. We offer relocation packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.