Screen Print Operators Required Birmingham - Postcode B6 Region Key role and responsibilities for our Screen Print Operator: Maintenance of the printing machines and cleaning Quality checking of the printed products Preforming test prints Loading and unloading materials in to the print machines Identify and resolve print issues Minimum requirements for our Screen Print Operator: Excellent attention to detail Ability to work unsupervised Can do attitude Team player / ability to assist others Good time management skills and a flexible approach to working hours Ability to work on own initiative or as a part of the team Pay rate: 12.50 per hour Working hours to start are: Monday - Thursday: 07:00 AM - 17:00 PM Friday: 08:00Am - 12:00PM This job is commutable from the following areas: Birmingham City Centre, Walsall, Aston, Nechells, West Bromwich, Bordesley Green, Shard End, Coleshill, Harborne, Sandwell, Wamley, Short Heath If you believe that your skills and experience match what we are looking for please call our office and ask for Carmen on (phone number removed) or submit your CV by clicking "Apply Now" and we will be in touch
Sep 04, 2025
Seasonal
Screen Print Operators Required Birmingham - Postcode B6 Region Key role and responsibilities for our Screen Print Operator: Maintenance of the printing machines and cleaning Quality checking of the printed products Preforming test prints Loading and unloading materials in to the print machines Identify and resolve print issues Minimum requirements for our Screen Print Operator: Excellent attention to detail Ability to work unsupervised Can do attitude Team player / ability to assist others Good time management skills and a flexible approach to working hours Ability to work on own initiative or as a part of the team Pay rate: 12.50 per hour Working hours to start are: Monday - Thursday: 07:00 AM - 17:00 PM Friday: 08:00Am - 12:00PM This job is commutable from the following areas: Birmingham City Centre, Walsall, Aston, Nechells, West Bromwich, Bordesley Green, Shard End, Coleshill, Harborne, Sandwell, Wamley, Short Heath If you believe that your skills and experience match what we are looking for please call our office and ask for Carmen on (phone number removed) or submit your CV by clicking "Apply Now" and we will be in touch
Ernest Gordon Recruitment Limited
Stratford-upon-avon, Warwickshire
Warehouse Manager (Forklift License)£30,000 - £35,000 + Day Shifts + Monday - Friday + Onsite ParkingBidford-on-avonAre you a Warehouse Manager or similar with a forklift license looking for a stable Monday-to-Friday day shift position with a growing company where you will look after an expanding team as the business grows for a stable future?On offer the chance to join a well-established business that has been distributing machinery across the UK for over 50 years. As they expand their product offering to include a new range of robotics, they are looking to grow the sales and administration team to support this development.In this role, You will supervise daily warehouse operations, including quality checks, inventory control, and logistics, while leading a small team. Responsibilities include stock checks, record keeping, manual unloading of containers, and forklift operation.This will suit someone who has background as a warehouse manager looking for a stable, Monday-to-Friday day shift role with a growing company. The Role Manage incoming and outgoing goods Operate a forklift Manual handling and container unload The Person Forklift license Background in warehousing or similar Commutable to Bidford-on-avon Reference BBBH21593Warehouse Manager, Warehouse supervisor, Team leader, Technician, Picker, Packer, Forklift operator, Bidford-on-avon, Stratford-upon-avon, Alcester, Evesham, Redditch, Worcester If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skillset.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website
Sep 04, 2025
Full time
Warehouse Manager (Forklift License)£30,000 - £35,000 + Day Shifts + Monday - Friday + Onsite ParkingBidford-on-avonAre you a Warehouse Manager or similar with a forklift license looking for a stable Monday-to-Friday day shift position with a growing company where you will look after an expanding team as the business grows for a stable future?On offer the chance to join a well-established business that has been distributing machinery across the UK for over 50 years. As they expand their product offering to include a new range of robotics, they are looking to grow the sales and administration team to support this development.In this role, You will supervise daily warehouse operations, including quality checks, inventory control, and logistics, while leading a small team. Responsibilities include stock checks, record keeping, manual unloading of containers, and forklift operation.This will suit someone who has background as a warehouse manager looking for a stable, Monday-to-Friday day shift role with a growing company. The Role Manage incoming and outgoing goods Operate a forklift Manual handling and container unload The Person Forklift license Background in warehousing or similar Commutable to Bidford-on-avon Reference BBBH21593Warehouse Manager, Warehouse supervisor, Team leader, Technician, Picker, Packer, Forklift operator, Bidford-on-avon, Stratford-upon-avon, Alcester, Evesham, Redditch, Worcester If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skillset.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website
Ernest Gordon Recruitment Limited
Stratford-upon-avon, Warwickshire
Warehouse Operative (Forklift License)£26,000 - £28,000 - + Overtime + Day Shifts + Monday - Friday + Onsite ParkingBidford-on-avonDo you have a forklift license and experience working in a warehouse or a similar background? Are you looking for a stable Monday-to-Friday day shift position with a growing company that is expanding its team to meet increasing business demands?On offer the chance to join a well-established business that has been distributing machinery across the UK for over 50 years. As they expand their product offering to include a new range of robotics, they are looking to grow the sales and administration team to support this development.In this role, you'll handle the movement of goods in and out of the warehouse, including keeping track of stock and getting orders ready. You'll help with manual lifting and unloading containers from overseas suppliers. You will also use a forklift to move materials around the warehouse.This will suit someone who has a forklift license and a background in warehouse operations or similar looking for a stable, Monday-to-Friday day shift role with a growing company. The Role Manage incoming and outgoing goods Operate a forklift Manual handling and container unload The Person Forklift license Background in warehousing or similar Commutable to Bidford-on-avon ReferenceBBBH21592 Warehouse operative, Technician, Picker, Packer, Forklift operator, Bidford-on-avon, Stratford-upon-avon, Alcester, Evesham, Redditch, Worcester, Warehouse worker, Logistics operative If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skillset.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website
Sep 04, 2025
Full time
Warehouse Operative (Forklift License)£26,000 - £28,000 - + Overtime + Day Shifts + Monday - Friday + Onsite ParkingBidford-on-avonDo you have a forklift license and experience working in a warehouse or a similar background? Are you looking for a stable Monday-to-Friday day shift position with a growing company that is expanding its team to meet increasing business demands?On offer the chance to join a well-established business that has been distributing machinery across the UK for over 50 years. As they expand their product offering to include a new range of robotics, they are looking to grow the sales and administration team to support this development.In this role, you'll handle the movement of goods in and out of the warehouse, including keeping track of stock and getting orders ready. You'll help with manual lifting and unloading containers from overseas suppliers. You will also use a forklift to move materials around the warehouse.This will suit someone who has a forklift license and a background in warehouse operations or similar looking for a stable, Monday-to-Friday day shift role with a growing company. The Role Manage incoming and outgoing goods Operate a forklift Manual handling and container unload The Person Forklift license Background in warehousing or similar Commutable to Bidford-on-avon ReferenceBBBH21592 Warehouse operative, Technician, Picker, Packer, Forklift operator, Bidford-on-avon, Stratford-upon-avon, Alcester, Evesham, Redditch, Worcester, Warehouse worker, Logistics operative If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skillset.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website
Thrive Group are delighted to be working with an engineering company in Trowbridge that is actively looking to recruit a Metal Press Operator to join the team on a permanent basis. What you will be doing: Working in the workshop and with a mechanical background, your duties will include: Set up machine and manually feed metal for punching and tapping different products (inserts etc) Inspection of materials produced and quality checking Use of simple hand tools Adhere to Health and Safety practices as determined by the needs of the business and legislation. What you will need to succeed: Previous production / mechanical background Able to interpret engineering drawings Enthusiastic, can do attitude Able to work on own initiative Excellent communication and interpersonal skills Able to work to deadlines What you will receive in return: £30,000 to £35,490 per annum (DOE) Monday to Thursday - 0800-16.45 & Friday - 0800-12: hour per week What you need to do next: If this position sounds of interest and you would like to be considered. Please email on sarah. removed) or contact me on (phone number removed) to discuss further. Thrive group are acting as an employment agency with respect to this vacancy. If you have not heard from a consultant within 7 days, please assume you have been unsuccessful on this occasion. PRMSTH
Sep 04, 2025
Full time
Thrive Group are delighted to be working with an engineering company in Trowbridge that is actively looking to recruit a Metal Press Operator to join the team on a permanent basis. What you will be doing: Working in the workshop and with a mechanical background, your duties will include: Set up machine and manually feed metal for punching and tapping different products (inserts etc) Inspection of materials produced and quality checking Use of simple hand tools Adhere to Health and Safety practices as determined by the needs of the business and legislation. What you will need to succeed: Previous production / mechanical background Able to interpret engineering drawings Enthusiastic, can do attitude Able to work on own initiative Excellent communication and interpersonal skills Able to work to deadlines What you will receive in return: £30,000 to £35,490 per annum (DOE) Monday to Thursday - 0800-16.45 & Friday - 0800-12: hour per week What you need to do next: If this position sounds of interest and you would like to be considered. Please email on sarah. removed) or contact me on (phone number removed) to discuss further. Thrive group are acting as an employment agency with respect to this vacancy. If you have not heard from a consultant within 7 days, please assume you have been unsuccessful on this occasion. PRMSTH
Responsibilities: - Set up and operate CNC turning machines to produce precision parts according to specifications - Read and interpret blueprints, engineering drawings, and work orders to determine machining requirements - Select and install cutting tools, adjust machine settings, and monitor the machining process to ensure quality and efficiency - Inspect finished parts using precision measuring instruments to verify conformance to specifications - Perform routine maintenance on machines and equipment to ensure optimal performance - Collaborate with team members and supervisors to troubleshoot issues and improve production processes Qualifications: - High school diploma or equivalent - Previous experience operating CNC turning machines 5 years minimum - Proficiency in reading blueprints and engineering drawings - Strong knowledge of materials handling, including selecting appropriate materials for specific projects - Basic math skills for performing calculations and measurements - Familiarity with CAD software, such as One Cnc, for programming machine operations - Ability to use hand tools and tooling effectively This position offers competitive pay based on experience and skills. Job Type: Full-time Pay: £14.00-£20.00 per hour Expected hours: 40 per week Benefits: Company pension Free parking Education: GCSE or equivalent (preferred) Ability to Commute: cv91hu (required) Ability to Relocate: cv91hu: Relocate before starting work (required) Work Location: In person Reference ID: cnc turner
Sep 04, 2025
Full time
Responsibilities: - Set up and operate CNC turning machines to produce precision parts according to specifications - Read and interpret blueprints, engineering drawings, and work orders to determine machining requirements - Select and install cutting tools, adjust machine settings, and monitor the machining process to ensure quality and efficiency - Inspect finished parts using precision measuring instruments to verify conformance to specifications - Perform routine maintenance on machines and equipment to ensure optimal performance - Collaborate with team members and supervisors to troubleshoot issues and improve production processes Qualifications: - High school diploma or equivalent - Previous experience operating CNC turning machines 5 years minimum - Proficiency in reading blueprints and engineering drawings - Strong knowledge of materials handling, including selecting appropriate materials for specific projects - Basic math skills for performing calculations and measurements - Familiarity with CAD software, such as One Cnc, for programming machine operations - Ability to use hand tools and tooling effectively This position offers competitive pay based on experience and skills. Job Type: Full-time Pay: £14.00-£20.00 per hour Expected hours: 40 per week Benefits: Company pension Free parking Education: GCSE or equivalent (preferred) Ability to Commute: cv91hu (required) Ability to Relocate: cv91hu: Relocate before starting work (required) Work Location: In person Reference ID: cnc turner
Jonathan Lee Recruitment Ltd
Wellington, Shropshire
MACHINE SETTER OPERATOR VACANCIES IN TELFORD, SHROPSHIRE Do you have experience working with the Food Manufacturing, Food Packaging, FMCG or the Manufacturing Industry, and are you looking for a new permanent job? We are proud to be working with a leading food manufacturing business in Telford to help them recruit experienced Machine Setter Operators on a straight permanent basis, this business are increasing their production capacity by adding in 2 new production lines, and they are looking to hire permanent staff between now and the beginning of September. We are looking for someone who lives within a 20-25 mile radius of Telford, Shropshire. This role will be working a 4 on 4 off shift pattern (12 hour days and nights shifts), the starting salary is just over £33,733 per annum, initially rising to just under £37,500 per annum, and then finally increase to just over £41,000 per annum once fully signed off and trained. This will be a 2 stage interview process, with the first stage consisting of a numeracy and literacy assessment on site in Telford, Shropshire. These roles would be a great fit for someone who has previously worked as a Production Technician, Manufacturing Technician, Technical Operator, Process Operator, Skilled Machine Operator, Machine Setter or Skilled Machinist within a production/manufacturing facility. What You Will Do: Lead and oversee the performance of a cutting-edge production line, working closely with machine operators to ensure optimal efficiency. Take ownership of the line's performance, identifying and resolving technical issues to minimise downtime. Drive continuous improvement by refining processes and collaborating with development teams to boost productivity. Ensure full compliance with Food Safety, Quality, and Health & Safety standards at all times. Perform start-ups, changeovers, and daily operations in line with standard operating procedures. Train and guide team members, sharing your technical expertise to drive performance and maintain high standards. What You Will Bring: A strong technical mindset and a passion for working with machinery. Previous experience in a similar role, ideally within the food or processing industry (though this is not essential). A proactive approach to problem-solving, with the ability to take action and deliver results under pressure. A commitment to continuous learning, with a keen interest in new techniques and technologies. Excellent communication skills, with the confidence to challenge and collaborate effectively with team members and experts. This company is dedicated to innovation, integrity, and teamwork, values that underpin everything they do. By joining as a Machine Setter Operator, you'll play a vital role in driving their operations forward, ensuring their production lines remain at the forefront of the industry. This is your chance to be part of a business that's constantly growing, pushing boundaries, and investing in its people. Location: The role is based in Telford, Shropshire. Interested?: Don't miss the chance to be part of something truly exceptional. If you're ready to take on the challenge and make your mark as a Machine Setter Operator, apply today and start your journey towards an exciting future! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Sep 04, 2025
Full time
MACHINE SETTER OPERATOR VACANCIES IN TELFORD, SHROPSHIRE Do you have experience working with the Food Manufacturing, Food Packaging, FMCG or the Manufacturing Industry, and are you looking for a new permanent job? We are proud to be working with a leading food manufacturing business in Telford to help them recruit experienced Machine Setter Operators on a straight permanent basis, this business are increasing their production capacity by adding in 2 new production lines, and they are looking to hire permanent staff between now and the beginning of September. We are looking for someone who lives within a 20-25 mile radius of Telford, Shropshire. This role will be working a 4 on 4 off shift pattern (12 hour days and nights shifts), the starting salary is just over £33,733 per annum, initially rising to just under £37,500 per annum, and then finally increase to just over £41,000 per annum once fully signed off and trained. This will be a 2 stage interview process, with the first stage consisting of a numeracy and literacy assessment on site in Telford, Shropshire. These roles would be a great fit for someone who has previously worked as a Production Technician, Manufacturing Technician, Technical Operator, Process Operator, Skilled Machine Operator, Machine Setter or Skilled Machinist within a production/manufacturing facility. What You Will Do: Lead and oversee the performance of a cutting-edge production line, working closely with machine operators to ensure optimal efficiency. Take ownership of the line's performance, identifying and resolving technical issues to minimise downtime. Drive continuous improvement by refining processes and collaborating with development teams to boost productivity. Ensure full compliance with Food Safety, Quality, and Health & Safety standards at all times. Perform start-ups, changeovers, and daily operations in line with standard operating procedures. Train and guide team members, sharing your technical expertise to drive performance and maintain high standards. What You Will Bring: A strong technical mindset and a passion for working with machinery. Previous experience in a similar role, ideally within the food or processing industry (though this is not essential). A proactive approach to problem-solving, with the ability to take action and deliver results under pressure. A commitment to continuous learning, with a keen interest in new techniques and technologies. Excellent communication skills, with the confidence to challenge and collaborate effectively with team members and experts. This company is dedicated to innovation, integrity, and teamwork, values that underpin everything they do. By joining as a Machine Setter Operator, you'll play a vital role in driving their operations forward, ensuring their production lines remain at the forefront of the industry. This is your chance to be part of a business that's constantly growing, pushing boundaries, and investing in its people. Location: The role is based in Telford, Shropshire. Interested?: Don't miss the chance to be part of something truly exceptional. If you're ready to take on the challenge and make your mark as a Machine Setter Operator, apply today and start your journey towards an exciting future! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jonathan Lee Recruitment Ltd
Wellington, Shropshire
PRODUCTION TECHNICIANS NEEDED IN TELFORD, SHROPSHIRE Do you have experience working with the Food Manufacturing, Food Packaging, FMCG or the Manufacturing Industry, and are you looking for a new permanent job to start ASAP?! Due to an increase within their production facility and 2 new production lines being installed this year, we are looking for 8 Production Technicians to join a food manufacturing business in Telford on a permanent basis. These jobs will be working on a 4 on 4 off shift pattern (12 hour days and nights shifts), the starting salary is just over £33,733 per annum, initially rising to just under £37,500 per annum, and then finally increase to just over £41,000 per annum once fully signed off and trained. The hiring manager is looking for someone who lives within a 25-mile radius of Telford, Shropshire. This will be a 2 stage interview process, with the first stage consisting of a numeracy and literacy assessment on site in Telford, Shropshire. These roles would be a great fit for someone who has previously worked as a Manufacturing Technician, Senior Operator, Skilled Operator, Technical Operator, Process Operator, Skilled Machine Operator, Machine Setter or Skilled Machinist within a production/manufacturing facility. What You Will Do: Take ownership of a production line's performance, ensuring it operates efficiently and smoothly at all times. Lead a team of machine operators, providing training, guidance, and driving performance to meet targets. Identify potential faults, investigate technical issues, and solve problems to minimise downtime. Drive continuous improvement initiatives, refining processes to boost productivity and operational standards. Ensure full compliance with Food Safety, Quality, and Health & Safety standards. Perform start-ups, changeovers, and run the production line according to standard operating procedures. What You Will Bring: A strong technical mindset and a passion for working with machinery. Experience in a fast-paced production environment, ideally within the food or processing industry. A proactive approach to problem-solving, with a focus on delivering results. A desire to learn new techniques and embrace continuous improvement and lean manufacturing principles. Excellent communication skills, with the ability to collaborate effectively and challenge when necessary. This role is an incredible opportunity to work with cutting-edge production lines and contribute to a company that values determination, quality, integrity, and teamwork. You'll be part of a business that's constantly pushing boundaries and investing in its people, offering a platform for growth and development. Location: The role is based in Telford, Shropshire. Interested?: If you're ready to step into a challenging and rewarding role as a Production Technician , don't miss this opportunity! Apply now and take the first step towards advancing your career in a thriving industry. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Sep 04, 2025
Full time
PRODUCTION TECHNICIANS NEEDED IN TELFORD, SHROPSHIRE Do you have experience working with the Food Manufacturing, Food Packaging, FMCG or the Manufacturing Industry, and are you looking for a new permanent job to start ASAP?! Due to an increase within their production facility and 2 new production lines being installed this year, we are looking for 8 Production Technicians to join a food manufacturing business in Telford on a permanent basis. These jobs will be working on a 4 on 4 off shift pattern (12 hour days and nights shifts), the starting salary is just over £33,733 per annum, initially rising to just under £37,500 per annum, and then finally increase to just over £41,000 per annum once fully signed off and trained. The hiring manager is looking for someone who lives within a 25-mile radius of Telford, Shropshire. This will be a 2 stage interview process, with the first stage consisting of a numeracy and literacy assessment on site in Telford, Shropshire. These roles would be a great fit for someone who has previously worked as a Manufacturing Technician, Senior Operator, Skilled Operator, Technical Operator, Process Operator, Skilled Machine Operator, Machine Setter or Skilled Machinist within a production/manufacturing facility. What You Will Do: Take ownership of a production line's performance, ensuring it operates efficiently and smoothly at all times. Lead a team of machine operators, providing training, guidance, and driving performance to meet targets. Identify potential faults, investigate technical issues, and solve problems to minimise downtime. Drive continuous improvement initiatives, refining processes to boost productivity and operational standards. Ensure full compliance with Food Safety, Quality, and Health & Safety standards. Perform start-ups, changeovers, and run the production line according to standard operating procedures. What You Will Bring: A strong technical mindset and a passion for working with machinery. Experience in a fast-paced production environment, ideally within the food or processing industry. A proactive approach to problem-solving, with a focus on delivering results. A desire to learn new techniques and embrace continuous improvement and lean manufacturing principles. Excellent communication skills, with the ability to collaborate effectively and challenge when necessary. This role is an incredible opportunity to work with cutting-edge production lines and contribute to a company that values determination, quality, integrity, and teamwork. You'll be part of a business that's constantly pushing boundaries and investing in its people, offering a platform for growth and development. Location: The role is based in Telford, Shropshire. Interested?: If you're ready to step into a challenging and rewarding role as a Production Technician , don't miss this opportunity! Apply now and take the first step towards advancing your career in a thriving industry. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Machine operator for VPK working on a production line. Location Wellington SOMERSET. TA21 9JG Full job description WELLINGTON SOMERSET MACHINE OPERATORS REQUIRED FOR IMMEDIATE STARTS ON A CHOICE OF SHIFTS. Excellent progression opportunities with a significant increase in wages when signed off as multi-skilled. The production operator roles will involve operating machinery to cut lightweight materials and logo them. Quality control of ready products is expected as well as identifying any faults within the machinery. Plenty of optional overtime is also available with this role. Permanent positions available following successful trial period. Shift Patterns: Day Shift Week 1 Monday to Friday 06:00-14:00 Week 2 Monday to Friday 14:00 - 22:00 Night Shift Sunday to Thursday 22:00 - 06:00 7.5hrs per shift Pay Rates: Day Shift Pay Rates: 12.82 per hour Monday to Friday 19.23 after 37.5 hours worked 25.64 Sundays and Bank Holidays Night Shift Pay Rates: 14.10ph Sunday to Thursday 21.15ph after 37.50 hours worked 28.20ph Saturdays Our client offers: Free car parking Canteen Other benefits of working for The Best Connection Group Limited include: 28 days annual leave pro rata for PAYE Online payslips Pension contribution Weekly pay Choice of long term, short term and odd days or weekends available Flexible shift patterns Ongoing assignments throughout 2025 Possible permanent positions following successful trial period B enefits & Requirements: Hourly rate as above (not age dependent) Benefits Annual leave Free parking Company pension Canteen
Sep 04, 2025
Seasonal
Machine operator for VPK working on a production line. Location Wellington SOMERSET. TA21 9JG Full job description WELLINGTON SOMERSET MACHINE OPERATORS REQUIRED FOR IMMEDIATE STARTS ON A CHOICE OF SHIFTS. Excellent progression opportunities with a significant increase in wages when signed off as multi-skilled. The production operator roles will involve operating machinery to cut lightweight materials and logo them. Quality control of ready products is expected as well as identifying any faults within the machinery. Plenty of optional overtime is also available with this role. Permanent positions available following successful trial period. Shift Patterns: Day Shift Week 1 Monday to Friday 06:00-14:00 Week 2 Monday to Friday 14:00 - 22:00 Night Shift Sunday to Thursday 22:00 - 06:00 7.5hrs per shift Pay Rates: Day Shift Pay Rates: 12.82 per hour Monday to Friday 19.23 after 37.5 hours worked 25.64 Sundays and Bank Holidays Night Shift Pay Rates: 14.10ph Sunday to Thursday 21.15ph after 37.50 hours worked 28.20ph Saturdays Our client offers: Free car parking Canteen Other benefits of working for The Best Connection Group Limited include: 28 days annual leave pro rata for PAYE Online payslips Pension contribution Weekly pay Choice of long term, short term and odd days or weekends available Flexible shift patterns Ongoing assignments throughout 2025 Possible permanent positions following successful trial period B enefits & Requirements: Hourly rate as above (not age dependent) Benefits Annual leave Free parking Company pension Canteen
Vacancy Title: Machine Operator (Print) Location: Wakefield Salary: £26k pa Hague Group is a thriving, family-owned business with a strong financial foundation and a history of consistent growth. We are looking for an individual with a mechanical aptitude to join the Print Production Team at our head office site in Wakefield which houses our label manufacturing facility. Previous machine operation experience gained in print is not essential as full training will be provided for the successful candidate. KEY RESPONSIBILITIES: Once trained, you'll be responsible for the setup, operation and maintenance of the label converting line. Label converting involves processes that take a printed or plain label and transform it into a functional, finished product ready for application. Installing cutting dies, printing plates and inks Adjusting line settings such as speed and tension, to meet job specifications Undertaking product quality inspections Performing routine line maintenance such as cleaning and lubricating Maintaining accurate production records CANDIDATE PROFILE Has a production / machine / engineering background and a mechanical aptitude for machinery maintenance and troubleshooting A quick learner who is able to effectively put learning into practice Comfortable using IT and technology Good eye for detail and quality focussed Safety-conscious, well-organised and conscientious Effective team player with good communication skills Always demonstrates a 'can-do' attitude Able to undertake a role that involves extensive manual handling activities WORK DAYS & HOURS 37.5 hours a week, Monday - Friday, 8am - 4pm. As workload on this new machine increases, the shift may be varied to a split shift that operates 6-2 / 2-10 and as such we are looking for applicants who will offer flexibility in their working hours. A split shift will attract an enhanced rate of pay (circa 10%). BENEFITS Basic annual salary of £26k Generous annual leave of 27 days plus bank holidays Pension scheme and Life Assurance Access to an employee assistance programme Company events to foster team spirit Free, secure on-site parking (WF6 1TD) APPLICATION PROCESS Ready to join our dedicated and friendly team? Apply online with your CV and become part of Hague Group's exciting growth journey. We can't wait to hear from you! INDLS
Sep 04, 2025
Full time
Vacancy Title: Machine Operator (Print) Location: Wakefield Salary: £26k pa Hague Group is a thriving, family-owned business with a strong financial foundation and a history of consistent growth. We are looking for an individual with a mechanical aptitude to join the Print Production Team at our head office site in Wakefield which houses our label manufacturing facility. Previous machine operation experience gained in print is not essential as full training will be provided for the successful candidate. KEY RESPONSIBILITIES: Once trained, you'll be responsible for the setup, operation and maintenance of the label converting line. Label converting involves processes that take a printed or plain label and transform it into a functional, finished product ready for application. Installing cutting dies, printing plates and inks Adjusting line settings such as speed and tension, to meet job specifications Undertaking product quality inspections Performing routine line maintenance such as cleaning and lubricating Maintaining accurate production records CANDIDATE PROFILE Has a production / machine / engineering background and a mechanical aptitude for machinery maintenance and troubleshooting A quick learner who is able to effectively put learning into practice Comfortable using IT and technology Good eye for detail and quality focussed Safety-conscious, well-organised and conscientious Effective team player with good communication skills Always demonstrates a 'can-do' attitude Able to undertake a role that involves extensive manual handling activities WORK DAYS & HOURS 37.5 hours a week, Monday - Friday, 8am - 4pm. As workload on this new machine increases, the shift may be varied to a split shift that operates 6-2 / 2-10 and as such we are looking for applicants who will offer flexibility in their working hours. A split shift will attract an enhanced rate of pay (circa 10%). BENEFITS Basic annual salary of £26k Generous annual leave of 27 days plus bank holidays Pension scheme and Life Assurance Access to an employee assistance programme Company events to foster team spirit Free, secure on-site parking (WF6 1TD) APPLICATION PROCESS Ready to join our dedicated and friendly team? Apply online with your CV and become part of Hague Group's exciting growth journey. We can't wait to hear from you! INDLS
CNC Milling Setter/Operator (Heidenhain) Day Shift Up to £20 per hour + Overtime (x1.25) We are looking for a skilled CNC Milling Setter/Operator to join a long-established precision engineering business with a strong reputation across the automotive, motorsport, aerospace, foundry, and heritage vehicle sectors . With over two decades of industry experience and significant ongoing investment in modern CNC technology, this company offers the chance to work on 3-axis, 3+2 axis, and 5-axis machining projects using state-of-the-art machining centres and advanced CAM software. You'll be joining a friendly, growing team with plenty of opportunities for progression. The Role Setting and operating CNC milling machines (Heidenhain control) Editing programs on the machine (advantageous, but not essential) Working on Mazak and Bridgeport machines Using WorkNC CAM software for complex machining requirements Producing precision components across a wide variety of industries Maintaining excellent surface finishes on materials such as aluminium, tool steel, plastics, and model board About You Experienced CNC Setter/Operator with a background in milling Skilled in Heidenhain controls (essential) Ability to edit at the machine (preferred but not required) A keen eye for detail and commitment to high-quality work Positive team player with a proactive attitude What's On Offer Up to £20 per hour (DOE) Day shift only - great work/life balance Overtime paid at x1.25 Long-established business with 25 CNC machining centres and ongoing investment in the latest equipment Opportunity to work on exciting projects across OEM automotive, motorsport/F1, aerospace, heritage vehicles, and foundry tooling Supportive, skilled team with genuine opportunities for progression This is a fantastic opportunity for a CNC Milling Setter/Operator to work on a variety of challenging projects in a modern, well-equipped environment.
Sep 04, 2025
Full time
CNC Milling Setter/Operator (Heidenhain) Day Shift Up to £20 per hour + Overtime (x1.25) We are looking for a skilled CNC Milling Setter/Operator to join a long-established precision engineering business with a strong reputation across the automotive, motorsport, aerospace, foundry, and heritage vehicle sectors . With over two decades of industry experience and significant ongoing investment in modern CNC technology, this company offers the chance to work on 3-axis, 3+2 axis, and 5-axis machining projects using state-of-the-art machining centres and advanced CAM software. You'll be joining a friendly, growing team with plenty of opportunities for progression. The Role Setting and operating CNC milling machines (Heidenhain control) Editing programs on the machine (advantageous, but not essential) Working on Mazak and Bridgeport machines Using WorkNC CAM software for complex machining requirements Producing precision components across a wide variety of industries Maintaining excellent surface finishes on materials such as aluminium, tool steel, plastics, and model board About You Experienced CNC Setter/Operator with a background in milling Skilled in Heidenhain controls (essential) Ability to edit at the machine (preferred but not required) A keen eye for detail and commitment to high-quality work Positive team player with a proactive attitude What's On Offer Up to £20 per hour (DOE) Day shift only - great work/life balance Overtime paid at x1.25 Long-established business with 25 CNC machining centres and ongoing investment in the latest equipment Opportunity to work on exciting projects across OEM automotive, motorsport/F1, aerospace, heritage vehicles, and foundry tooling Supportive, skilled team with genuine opportunities for progression This is a fantastic opportunity for a CNC Milling Setter/Operator to work on a variety of challenging projects in a modern, well-equipped environment.
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Telehandler Operator required in Weymouth. 11th and 12th September Our client is currently seeking a telehandler operator to offer cover on one of their sites in the Weymouth area. The site is quite small, so not much back and forth driving the machine around but there will be several lifts to be done per day, and is important that you are a very competent operator. Must have: CPCS or NPORS Relevant experience Checkable references If interested, please apply or contact Tom at Interaction Construction (phone number removed) / (phone number removed)
Sep 04, 2025
Contractor
Telehandler Operator required in Weymouth. 11th and 12th September Our client is currently seeking a telehandler operator to offer cover on one of their sites in the Weymouth area. The site is quite small, so not much back and forth driving the machine around but there will be several lifts to be done per day, and is important that you are a very competent operator. Must have: CPCS or NPORS Relevant experience Checkable references If interested, please apply or contact Tom at Interaction Construction (phone number removed) / (phone number removed)
The Opportunity: We are looking for a Mobile Measurement Technician to be part of our exceptional team. If you are an individual with drive, keenness to learn, who enjoys working in a team to solve problems, whilst operating in a highly demanding environment, then this may be the role for you. Responsibilities: Safe operating of departmental metrology hardware. Operating departmental metrology software. Create and run detailed measurement programs. Produce measurement data in requested format i.e. pdf, excel, stl. Investigation of part measurement issues Adhere to all H&S requirements. Assist in machine verification and preventative maintenance. Following measurement instructions to ensure requests are completed in a timely manner to the expected high standards. Undertake any other work as directed by line manager as requested from time to time. Key Skills: Strong mobile inspection skills essential. Strong understanding of measurement principles. Good understanding of alignments. Ability to provide inspection reports to a professionally high standard. Ability to work with BIW & T&F parts and assemblies. Thorough knowledge of GOM & Polyworks Software or similar. Competent operators in the use of GOM, Articulated arms, Laser Trackers and Creaform system or similar. Knowledge of GD&T Ability to develop new and existing processes to improve departmental performance. Willingness/ability to work/travel across a wide range of sites/locations as required is essential. Excellent communication skills. Perficient IT/computer skills. Full driving license If you are interested and have the skills and experience required Apply Now! We will process your CV and personal information to assess your suitability for the role. If we wish to consider you further, we will register your personal information in our database and contact you. We may contact you from time to time about other relevant roles. Your personal information will be securely held. For more information, please refer to our privacy notice, a copy of which can be found on our website. Select Engineering Limited.
Sep 04, 2025
Contractor
The Opportunity: We are looking for a Mobile Measurement Technician to be part of our exceptional team. If you are an individual with drive, keenness to learn, who enjoys working in a team to solve problems, whilst operating in a highly demanding environment, then this may be the role for you. Responsibilities: Safe operating of departmental metrology hardware. Operating departmental metrology software. Create and run detailed measurement programs. Produce measurement data in requested format i.e. pdf, excel, stl. Investigation of part measurement issues Adhere to all H&S requirements. Assist in machine verification and preventative maintenance. Following measurement instructions to ensure requests are completed in a timely manner to the expected high standards. Undertake any other work as directed by line manager as requested from time to time. Key Skills: Strong mobile inspection skills essential. Strong understanding of measurement principles. Good understanding of alignments. Ability to provide inspection reports to a professionally high standard. Ability to work with BIW & T&F parts and assemblies. Thorough knowledge of GOM & Polyworks Software or similar. Competent operators in the use of GOM, Articulated arms, Laser Trackers and Creaform system or similar. Knowledge of GD&T Ability to develop new and existing processes to improve departmental performance. Willingness/ability to work/travel across a wide range of sites/locations as required is essential. Excellent communication skills. Perficient IT/computer skills. Full driving license If you are interested and have the skills and experience required Apply Now! We will process your CV and personal information to assess your suitability for the role. If we wish to consider you further, we will register your personal information in our database and contact you. We may contact you from time to time about other relevant roles. Your personal information will be securely held. For more information, please refer to our privacy notice, a copy of which can be found on our website. Select Engineering Limited.
Frontline Recruitment Group
Stockingford, Warwickshire
Role : CNC Turner Programmer, Setter, Operator Shifts : Mon-Thurs: 7:30 - 16:30 Fri: 7:30 - 12:30 Job description: We are currently looking for experienced CNC Turners to join our team. We are a well-established precision engineering company, manufacturing components. The successful candidate will be from a mechanical engineering background, being fully skilled in the operating of CNC turning machines with a high degree of professionalism and attention to detail. Fanuc and Mazatrol Your duties will include - Creating, editing and proving programmes Operating CNC turning machines to produce precision parts according to specifications Monitor machine operations to ensure proper functioning and make adjustments as necessary Inspect finished parts for quality and accuracy, using precision measuring instruments. Essential Skills and Competence s Be organized and methodical with the ability to multi-task. Work cleanly, tidily and considerately of co-workers Ensure consistent quality Ability to work independently or as part of a team Excellent time management Experience and understanding of working in aerospace would also be beneficial. This is a permanent full-time position Day shifts Overtime available (subject to availability) Opportunity to work for a company who are established in their field and who value their employees. Quality is at the core of what we do and therefore the successful candidate will be someone who is initiative-taking, dependable and has a positive attitude to join our team. If you would like to know more information regarding these roles, please contact us today! This vacancy is being advertised on behalf of Frontline recruitment, who are acting as an employment agency. Please call (phone number removed) Job Types: Full-time, Permanent Benefits: On-site parking Education: GCSE or equivalent (preferred) Experience: CNC Turning : 1 year (preferred) Work Location: In person
Sep 04, 2025
Full time
Role : CNC Turner Programmer, Setter, Operator Shifts : Mon-Thurs: 7:30 - 16:30 Fri: 7:30 - 12:30 Job description: We are currently looking for experienced CNC Turners to join our team. We are a well-established precision engineering company, manufacturing components. The successful candidate will be from a mechanical engineering background, being fully skilled in the operating of CNC turning machines with a high degree of professionalism and attention to detail. Fanuc and Mazatrol Your duties will include - Creating, editing and proving programmes Operating CNC turning machines to produce precision parts according to specifications Monitor machine operations to ensure proper functioning and make adjustments as necessary Inspect finished parts for quality and accuracy, using precision measuring instruments. Essential Skills and Competence s Be organized and methodical with the ability to multi-task. Work cleanly, tidily and considerately of co-workers Ensure consistent quality Ability to work independently or as part of a team Excellent time management Experience and understanding of working in aerospace would also be beneficial. This is a permanent full-time position Day shifts Overtime available (subject to availability) Opportunity to work for a company who are established in their field and who value their employees. Quality is at the core of what we do and therefore the successful candidate will be someone who is initiative-taking, dependable and has a positive attitude to join our team. If you would like to know more information regarding these roles, please contact us today! This vacancy is being advertised on behalf of Frontline recruitment, who are acting as an employment agency. Please call (phone number removed) Job Types: Full-time, Permanent Benefits: On-site parking Education: GCSE or equivalent (preferred) Experience: CNC Turning : 1 year (preferred) Work Location: In person
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Rocket Staffing Group Ltd
Kirkby-in-ashfield, Nottinghamshire
CNC Miller or turner Programmer Setter Operator Location Kirkby in Ashfield Notts Job Types: Full-time, Permanent Pay: 38k to 40,000.00 per year Monday to Fridays (8 hour shift) 8 hour shift Monday to Friday CNC Programmer in Heidenhain t o join us. The right person should be able to competently programme, set and operate CNC Milling machine for production and have previous experience working within a high precision manufacturing machine shop environment. The Candidate must: Have solid experience in programming CNC Milling machines. Have previous Operating/Setting and machining experience large sized components with Heidenhain controls Be fully conversant with reading and interpreting engineering drawings Be competent in producing high quality components. Be able to use engineering measuring equipment such as micrometres, verniers etc Have strong communication and time management skills. Be able to work under own initiative. Be a team player. The ideal candidate Can Program, Set and Operate using Heidenhain control systems Has the ability to write and edit programs Can work towards tight tolerances Has experience with medium/large volume batch work of large components Confident in working on parts up to 2m in length, using lifting equipment provided. Must have served an apprenticeship in CNC machining and be able to produce your papers or demonstrate 10 years working experience within your work history. Excellent working knowledge of 3-4 axis CNC machines, cutting speeds and feeds, geometric tolerances ISO (Apply online only) experience would be beneficial. Day to day duties Machining complex parts and components from various general engineering materials such as Aluminium, Alloy Steel, Stainless Steel, Inconel, and Titanium variety of materials Reading engineering drawings Changing tooling Inspecting components Use measuring equipment such as micrometres, plug gauges, verniers, screw plugs and ring gauges Benefits: Canteen Company pension Employee discount Free flu jabs Free parking On-site parking Schedule: 8 hour shift Monday to Friday Education: GCSE or equivalent (preferred) Experience: Machine Operators: 2 years (preferred) Work Location: In person please apply with your cv
Sep 04, 2025
Full time
CNC Miller or turner Programmer Setter Operator Location Kirkby in Ashfield Notts Job Types: Full-time, Permanent Pay: 38k to 40,000.00 per year Monday to Fridays (8 hour shift) 8 hour shift Monday to Friday CNC Programmer in Heidenhain t o join us. The right person should be able to competently programme, set and operate CNC Milling machine for production and have previous experience working within a high precision manufacturing machine shop environment. The Candidate must: Have solid experience in programming CNC Milling machines. Have previous Operating/Setting and machining experience large sized components with Heidenhain controls Be fully conversant with reading and interpreting engineering drawings Be competent in producing high quality components. Be able to use engineering measuring equipment such as micrometres, verniers etc Have strong communication and time management skills. Be able to work under own initiative. Be a team player. The ideal candidate Can Program, Set and Operate using Heidenhain control systems Has the ability to write and edit programs Can work towards tight tolerances Has experience with medium/large volume batch work of large components Confident in working on parts up to 2m in length, using lifting equipment provided. Must have served an apprenticeship in CNC machining and be able to produce your papers or demonstrate 10 years working experience within your work history. Excellent working knowledge of 3-4 axis CNC machines, cutting speeds and feeds, geometric tolerances ISO (Apply online only) experience would be beneficial. Day to day duties Machining complex parts and components from various general engineering materials such as Aluminium, Alloy Steel, Stainless Steel, Inconel, and Titanium variety of materials Reading engineering drawings Changing tooling Inspecting components Use measuring equipment such as micrometres, plug gauges, verniers, screw plugs and ring gauges Benefits: Canteen Company pension Employee discount Free flu jabs Free parking On-site parking Schedule: 8 hour shift Monday to Friday Education: GCSE or equivalent (preferred) Experience: Machine Operators: 2 years (preferred) Work Location: In person please apply with your cv
CNC Programmer 4 day working week £19.23 - £20.03 per hour Reputable company with Aviation Great working environment Great company culture We are working with a respected client of ours based in Manchester who are recruiting for a CNC Programmer with Powermill experience. The Job Develop and optimize CNC programs using Autodesk Powermill for precision machining. Interpret technical drawings and CAD models to create efficient toolpaths. Select appropriate cutting tools, speeds, and feeds for various materials. Produce accompanying detailed operator setup sheets. Conduct test runs and adjust programs to ensure accuracy and efficiency. Collaborate with machinists to refine machining processes. Troubleshoot machine errors and optimize performance. Use Powershape to create jig/fixtures and other holding to aid programming. Apply strict revision control of all types of data throughout. Work in accordance within the constraints of a ISO 9001 and AS9100 accredited manufacturing environment. About you Proficiency in Autodesk Powermill and Powershape. Fusion 360 may be beneficial. Strong understanding of CNC machining principles. Up to date with multi-axis machining techniques, tooling and tool path strategies on 3-axis & 5-axis CNC machines. Ability to read and interpret engineering drawings and GD&T specifications. Problem-solving skills for optimizing machining efficiency. Understanding of material properties, machining and setup techniques in sympathy of collision avoidance. Previous exposure to working in adherence to ISO9001 & AS9100 requirements. Capability to thrive in a Low volume/High mix production department. Ability to achieve UK security clearance is essential. Minimum of NVQ Level 3 Mechanical Engineering qualification/ time-served apprenticeship. For more information please send your CV, in confidence, to James at The Recruitment Fix.
Sep 04, 2025
Full time
CNC Programmer 4 day working week £19.23 - £20.03 per hour Reputable company with Aviation Great working environment Great company culture We are working with a respected client of ours based in Manchester who are recruiting for a CNC Programmer with Powermill experience. The Job Develop and optimize CNC programs using Autodesk Powermill for precision machining. Interpret technical drawings and CAD models to create efficient toolpaths. Select appropriate cutting tools, speeds, and feeds for various materials. Produce accompanying detailed operator setup sheets. Conduct test runs and adjust programs to ensure accuracy and efficiency. Collaborate with machinists to refine machining processes. Troubleshoot machine errors and optimize performance. Use Powershape to create jig/fixtures and other holding to aid programming. Apply strict revision control of all types of data throughout. Work in accordance within the constraints of a ISO 9001 and AS9100 accredited manufacturing environment. About you Proficiency in Autodesk Powermill and Powershape. Fusion 360 may be beneficial. Strong understanding of CNC machining principles. Up to date with multi-axis machining techniques, tooling and tool path strategies on 3-axis & 5-axis CNC machines. Ability to read and interpret engineering drawings and GD&T specifications. Problem-solving skills for optimizing machining efficiency. Understanding of material properties, machining and setup techniques in sympathy of collision avoidance. Previous exposure to working in adherence to ISO9001 & AS9100 requirements. Capability to thrive in a Low volume/High mix production department. Ability to achieve UK security clearance is essential. Minimum of NVQ Level 3 Mechanical Engineering qualification/ time-served apprenticeship. For more information please send your CV, in confidence, to James at The Recruitment Fix.
Frontline Recruitment Group
Stockingford, Warwickshire
Role : CNC Miller - Programmer, Setter,Operator Shifts : Mon-Thur: 7:30 - 16:30 Fridays 7:30 - 12:30 Job description: Overview We are seeking a skilled CNC Miller to join our dynamic team. The ideal candidate will possess a strong understanding of CNC machining processes and be able to translate engineering drawings into precise machine instructions. This role is crucial for ensuring the efficient fabrication of components while maintaining high-quality standards. If you have a passion for machining and a keen eye for detail, we encourage you to apply. Responsibilities Creating, editing and proving CNC programmes Setting and operating CNC Milling machines Interpret technical drawings and specifications to fabricate components using CNC mills. Utilise CAD software, such as SolidWorks, to create and modify programmes as required. Conduct tooling selection and setup, ensuring the correct tools are used for each job. Perform routine maintenance on CNC machines and troubleshoot any issues that arise during operation. Collaborate with the production team to ensure timely completion of projects while adhering to quality standards. Maintain a clean and organised workspace, following all safety protocols related to materials handling and equipment use. Experience Strong mechanical knowledge with the ability to understand complex engineering drawings. Familiarity with CAD software; experience with SolidWorks is highly desirable. Competence in basic maths for precise measurements and calculations related to machining tasks. Experience in using hand tools and materials handling within a warehouse or manufacturing environment is advantageous. Ability to work independently as well as part of a team, demonstrating excellent problem-solving skills. If you are ready to take on this challenging role within a supportive environment, we look forward to receiving your application. Job Types: Full-time, Permanent Experience: CNC Milling: 1 year (preferred) Work Location: In person
Sep 04, 2025
Full time
Role : CNC Miller - Programmer, Setter,Operator Shifts : Mon-Thur: 7:30 - 16:30 Fridays 7:30 - 12:30 Job description: Overview We are seeking a skilled CNC Miller to join our dynamic team. The ideal candidate will possess a strong understanding of CNC machining processes and be able to translate engineering drawings into precise machine instructions. This role is crucial for ensuring the efficient fabrication of components while maintaining high-quality standards. If you have a passion for machining and a keen eye for detail, we encourage you to apply. Responsibilities Creating, editing and proving CNC programmes Setting and operating CNC Milling machines Interpret technical drawings and specifications to fabricate components using CNC mills. Utilise CAD software, such as SolidWorks, to create and modify programmes as required. Conduct tooling selection and setup, ensuring the correct tools are used for each job. Perform routine maintenance on CNC machines and troubleshoot any issues that arise during operation. Collaborate with the production team to ensure timely completion of projects while adhering to quality standards. Maintain a clean and organised workspace, following all safety protocols related to materials handling and equipment use. Experience Strong mechanical knowledge with the ability to understand complex engineering drawings. Familiarity with CAD software; experience with SolidWorks is highly desirable. Competence in basic maths for precise measurements and calculations related to machining tasks. Experience in using hand tools and materials handling within a warehouse or manufacturing environment is advantageous. Ability to work independently as well as part of a team, demonstrating excellent problem-solving skills. If you are ready to take on this challenging role within a supportive environment, we look forward to receiving your application. Job Types: Full-time, Permanent Experience: CNC Milling: 1 year (preferred) Work Location: In person
Site Automation Engineer Runcorn Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: - Inverter drives - Programmable safety systems - PLCs - Servo drives -SCADA system - Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 04, 2025
Full time
Site Automation Engineer Runcorn Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: - Inverter drives - Programmable safety systems - PLCs - Servo drives -SCADA system - Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Site Automation Engineer Warrington Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: Inverter drives Programmable safety systems PLCs Servo drives SCADA system Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 04, 2025
Full time
Site Automation Engineer Warrington Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: Inverter drives Programmable safety systems PLCs Servo drives SCADA system Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
