Building Regulations Consultant Location: Colchester, Billericay, or London Salary: Up to 70k + Excellent Benefits Package Job Type: Permanent, Full-Time Are you an experienced construction professional with a building control background looking to take the next step in your career? This is a fantastic opportunity to join a highly respected multi-disciplinary property and construction consultancy as a Building Regulations Consultant within their growing Building Regulations, Principal Designer & Building Safety Act team. About the Company With a rich history and a reputation for providing inspirational and practical design solutions, this consultancy delivers services across a wide range of sectors, including commercial, education, residential, and more. As one of the few medium-sized consultancies offering integrated design and technical expertise, they are committed to improving the quality and sustainability of the built environment. With offices located across the UK and plans for further expansion, there has never been a better time to my client. Why Join Us? This company is people-focused, offering an exceptional working environment and benefits: Flexible/remote working to help maintain a great work-life balance. 25 days holiday plus bank holidays, festive shutdown, and long-service recognition. Professional development through coaching, mentoring, and membership support. Competitive salary with regular benchmarking to ensure fair pay. A fantastic pension scheme and health cash plan. Cycle to work scheme, on-site parking (excl. London), and season ticket loans. About the Role As a Building Regulations Consultant, you will play a key role in ensuring safety and compliance across a diverse range of exciting projects. Working as part of the central BRPD team and reporting to the H&S Director, you'll collaborate with the design teams to deliver innovative, compliant solutions for clients. Key Responsibilities: Acting as the Building Regulations Consultant for the consultancy's design teams. Reviewing full design packages for Building Regulations compliance and producing detailed compliance reports. Coordinating input from internal technical specialists and external consultants where required. Preparing and updating Building Safety Act compliance risk registers and related documentation. Providing expert advice on necessary construction-phase requirements and conducting periodic inspections. Maintaining documentation and compliance information on the agreed platform with clients. About You We're looking for a proactive and client-focused professional with the ability to: Manage your own workload and provide sound advice to clients and project teams. Collaboratively solve compliance challenges with confidence and expertise. Work closely with the H&S Director to develop the Building Regulations Principal Designer service. If this sounds like the next step in your career, please apply or contact Charlie Voss on (phone number removed) or (phone number removed).
Sep 04, 2025
Full time
Building Regulations Consultant Location: Colchester, Billericay, or London Salary: Up to 70k + Excellent Benefits Package Job Type: Permanent, Full-Time Are you an experienced construction professional with a building control background looking to take the next step in your career? This is a fantastic opportunity to join a highly respected multi-disciplinary property and construction consultancy as a Building Regulations Consultant within their growing Building Regulations, Principal Designer & Building Safety Act team. About the Company With a rich history and a reputation for providing inspirational and practical design solutions, this consultancy delivers services across a wide range of sectors, including commercial, education, residential, and more. As one of the few medium-sized consultancies offering integrated design and technical expertise, they are committed to improving the quality and sustainability of the built environment. With offices located across the UK and plans for further expansion, there has never been a better time to my client. Why Join Us? This company is people-focused, offering an exceptional working environment and benefits: Flexible/remote working to help maintain a great work-life balance. 25 days holiday plus bank holidays, festive shutdown, and long-service recognition. Professional development through coaching, mentoring, and membership support. Competitive salary with regular benchmarking to ensure fair pay. A fantastic pension scheme and health cash plan. Cycle to work scheme, on-site parking (excl. London), and season ticket loans. About the Role As a Building Regulations Consultant, you will play a key role in ensuring safety and compliance across a diverse range of exciting projects. Working as part of the central BRPD team and reporting to the H&S Director, you'll collaborate with the design teams to deliver innovative, compliant solutions for clients. Key Responsibilities: Acting as the Building Regulations Consultant for the consultancy's design teams. Reviewing full design packages for Building Regulations compliance and producing detailed compliance reports. Coordinating input from internal technical specialists and external consultants where required. Preparing and updating Building Safety Act compliance risk registers and related documentation. Providing expert advice on necessary construction-phase requirements and conducting periodic inspections. Maintaining documentation and compliance information on the agreed platform with clients. About You We're looking for a proactive and client-focused professional with the ability to: Manage your own workload and provide sound advice to clients and project teams. Collaboratively solve compliance challenges with confidence and expertise. Work closely with the H&S Director to develop the Building Regulations Principal Designer service. If this sounds like the next step in your career, please apply or contact Charlie Voss on (phone number removed) or (phone number removed).
A leading Architectural Practice in the City of London is looking for a skilled Architect or Architectural Technologist to step into a CDM Principal Designer role. If you have excellent communication skills and have experience of being appointed Principal Designer during your Architectural career, you would enjoy fantastic career progression. As the CDM Principal Designer will mitigate design stage risk on major commercial, regeneration, retail schemes across the capital, whilst working closely with the in-house Architects. The CDM Principal Designer's role You will carry out full Principal Designer duties, liaising with clients and design teams, identifying and mitigating risks and ensuring Architects are aware of their obligation as per CDM. Your design insight will be key to influencing safe, practical, and compliant building strategies. The CDM Principal Designer Qualified Architect (ARB) or Architectural Technologist (MCIAT) (required) NEBOSH Construction Certificate (preferred) CDM 2015 understanding with experience delivering PD duties (Required) Excellent communicator and team player (required) In Return? Salary: 50,000 - 60,000 Discretionary bonus Travel allowance Annual Leave + Bank holidays + Christmas Pension scheme Private medical care Professional development funding Contact George Cassidy: Phone: (phone number removed) (phone number removed) CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / Building Control / CertIOSH / GradIOSH / CMIOSH / APS / IMaPS / AaPS / CMaPS / CDM Consultant / CDM Advisor / H&S / Design Safety
Sep 04, 2025
Full time
A leading Architectural Practice in the City of London is looking for a skilled Architect or Architectural Technologist to step into a CDM Principal Designer role. If you have excellent communication skills and have experience of being appointed Principal Designer during your Architectural career, you would enjoy fantastic career progression. As the CDM Principal Designer will mitigate design stage risk on major commercial, regeneration, retail schemes across the capital, whilst working closely with the in-house Architects. The CDM Principal Designer's role You will carry out full Principal Designer duties, liaising with clients and design teams, identifying and mitigating risks and ensuring Architects are aware of their obligation as per CDM. Your design insight will be key to influencing safe, practical, and compliant building strategies. The CDM Principal Designer Qualified Architect (ARB) or Architectural Technologist (MCIAT) (required) NEBOSH Construction Certificate (preferred) CDM 2015 understanding with experience delivering PD duties (Required) Excellent communicator and team player (required) In Return? Salary: 50,000 - 60,000 Discretionary bonus Travel allowance Annual Leave + Bank holidays + Christmas Pension scheme Private medical care Professional development funding Contact George Cassidy: Phone: (phone number removed) (phone number removed) CDM / Principal Designer / Construction / NEBOSH / IOSH / Tech IOSH / Health and Safety / Building Control / CertIOSH / GradIOSH / CMIOSH / APS / IMaPS / AaPS / CMaPS / CDM Consultant / CDM Advisor / H&S / Design Safety
Mechanical Fitter Dover - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering East Sussex. This role is a mobile hands on position working in the field of Mechanical Engineering. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
Sep 04, 2025
Full time
Mechanical Fitter Dover - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering East Sussex. This role is a mobile hands on position working in the field of Mechanical Engineering. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
Mechanical Fitter Southampton - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering Hampshire and surrounding area. This role is a mobile hands on position working on Water Treatment sites. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
Sep 04, 2025
Full time
Mechanical Fitter Southampton - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering Hampshire and surrounding area. This role is a mobile hands on position working on Water Treatment sites. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
Infrastructure Engineer I'm working with a respected civil engineering consultancy that is looking to expand its team with the addition of a capable and motivated Civil Engineer. This is a fantastic opportunity for an engineer with a few years of post-graduate experience who is keen to take ownership of their own projects while continuing to grow under the guidance of senior staff. You'll be involved in a wide range of infrastructure and residential schemes, supporting the design and delivery of roads, drainage, and utility infrastructure. This role would suit someone who enjoys technical detail, values quality, and is confident working collaboratively within a project team. Key Responsibilities: Deliver design input for small to medium-scale civil engineering and housing projects Take direction from senior engineers while progressively taking on more responsibility Support the supervision and coordination of junior team members on assigned projects Prepare or check road designs using PDS or similar software Design surface and foul water drainage systems using WINDES or equivalent Assist in the production of Flood Risk Assessments (Phases 1 & 2) Develop water main designs for submission to Scottish Water and other authorities Monitor day-to-day project budgets and programme milestones Ensure the technical accuracy and quality of drawings leaving the office Manage the preparation and submission of roads and drainage applications Undertake site visits and surveys to assess existing infrastructure and services Contribute to technical reports, specifications, and contract documentation Conduct site inspections during construction to assess quality and safety standards Review contractor method statements and technical submissions for compliance Liaise directly with clients and external consultants throughout project delivery Maintain professionalism in all client and stakeholder interactions Keep up to date with industry standards, attending relevant CPD courses and seminars Act as a positive team player and contribute to the development of junior staff Follow company protocols for confidentiality, health & safety, and CDM compliance Support the team in delivering Principal Designer duties where required Undertake additional duties as needed to support wider project and team requirements What We're Looking For: We're seeking someone with a degree in Civil Engineering and a few years of relevant consultancy experience. You should be confident using industry-standard design tools, with a solid grounding in drainage and highways design. The ideal candidate will demonstrate initiative, a collaborative mindset, and a commitment to technical quality.
Sep 04, 2025
Full time
Infrastructure Engineer I'm working with a respected civil engineering consultancy that is looking to expand its team with the addition of a capable and motivated Civil Engineer. This is a fantastic opportunity for an engineer with a few years of post-graduate experience who is keen to take ownership of their own projects while continuing to grow under the guidance of senior staff. You'll be involved in a wide range of infrastructure and residential schemes, supporting the design and delivery of roads, drainage, and utility infrastructure. This role would suit someone who enjoys technical detail, values quality, and is confident working collaboratively within a project team. Key Responsibilities: Deliver design input for small to medium-scale civil engineering and housing projects Take direction from senior engineers while progressively taking on more responsibility Support the supervision and coordination of junior team members on assigned projects Prepare or check road designs using PDS or similar software Design surface and foul water drainage systems using WINDES or equivalent Assist in the production of Flood Risk Assessments (Phases 1 & 2) Develop water main designs for submission to Scottish Water and other authorities Monitor day-to-day project budgets and programme milestones Ensure the technical accuracy and quality of drawings leaving the office Manage the preparation and submission of roads and drainage applications Undertake site visits and surveys to assess existing infrastructure and services Contribute to technical reports, specifications, and contract documentation Conduct site inspections during construction to assess quality and safety standards Review contractor method statements and technical submissions for compliance Liaise directly with clients and external consultants throughout project delivery Maintain professionalism in all client and stakeholder interactions Keep up to date with industry standards, attending relevant CPD courses and seminars Act as a positive team player and contribute to the development of junior staff Follow company protocols for confidentiality, health & safety, and CDM compliance Support the team in delivering Principal Designer duties where required Undertake additional duties as needed to support wider project and team requirements What We're Looking For: We're seeking someone with a degree in Civil Engineering and a few years of relevant consultancy experience. You should be confident using industry-standard design tools, with a solid grounding in drainage and highways design. The ideal candidate will demonstrate initiative, a collaborative mindset, and a commitment to technical quality.
Reporting to the Framework Design Manager, you will be responsible for the design delivery of non-infrastructure wastewater projects within the Severn Trent Water AMP7 and AMP8 Frameworks. This role adopts a hybrid working model, splitting time between site offices (currently Barston) three days a week and home working two days a week. You will bring experience from the water sector, specifically in non-infrastructure wastewater, with a background in Mechanical, Electrical ICA, or Civils disciplines across maintenance, design, or capital delivery roles. As a motivated team player, you will collaborate effectively with multiple teams to deliver carbon-efficient, production-focused design solutions. Your role will encompass identifying design scope and deliverables, reviewing and challenging design programmes, managing design deliverables and changes, and ensuring design solutions meet affordability, buildability, and low carbon requirements. You will lead and record design meetings, workshops on buildability, carbon, and Design for Manufacture and Assembly (DfMA), and coordinate design reviews, technical assurance, and CDM reviews. You will implement and manage the project BIM strategy, support the framework s nominated principal designer, and maintain compliance with relevant legislation, particularly health and safety. Strong communication and professional relationship management with design, delivery, commercial, and employer teams are essential. You will also liaise closely with project teams to support procurement decisions and adhere to Costain governance for design management and project delivery. Skills Experience in water sector non-infrastructure wastewater projects Mechanical, Electrical ICA, or Civils discipline expertise Design delivery, procurement, management, and control Quality assurance and BIM to ISO 19650 standards Working knowledge of NEC4 suite of contracts Ability to deliver carbon-efficient, DfMA design solutions Strong communication and collaboration skills Commercial and contractual awareness Programme preparation and management Knowledge of CDM (2015) Regulations Software/Tools BIM software compliant with ISO 19650 (e.g., Revit, Navisworks) Project management and design coordination tools Certifications & Standards HNC/HND or degree in relevant engineering discipline Progressing towards Chartered status with a relevant professional body Valid UK driving licence Familiarity with CDM (2015) Regulations NEC4 contract knowledge Please send CVs to (url removed)
Sep 03, 2025
Contractor
Reporting to the Framework Design Manager, you will be responsible for the design delivery of non-infrastructure wastewater projects within the Severn Trent Water AMP7 and AMP8 Frameworks. This role adopts a hybrid working model, splitting time between site offices (currently Barston) three days a week and home working two days a week. You will bring experience from the water sector, specifically in non-infrastructure wastewater, with a background in Mechanical, Electrical ICA, or Civils disciplines across maintenance, design, or capital delivery roles. As a motivated team player, you will collaborate effectively with multiple teams to deliver carbon-efficient, production-focused design solutions. Your role will encompass identifying design scope and deliverables, reviewing and challenging design programmes, managing design deliverables and changes, and ensuring design solutions meet affordability, buildability, and low carbon requirements. You will lead and record design meetings, workshops on buildability, carbon, and Design for Manufacture and Assembly (DfMA), and coordinate design reviews, technical assurance, and CDM reviews. You will implement and manage the project BIM strategy, support the framework s nominated principal designer, and maintain compliance with relevant legislation, particularly health and safety. Strong communication and professional relationship management with design, delivery, commercial, and employer teams are essential. You will also liaise closely with project teams to support procurement decisions and adhere to Costain governance for design management and project delivery. Skills Experience in water sector non-infrastructure wastewater projects Mechanical, Electrical ICA, or Civils discipline expertise Design delivery, procurement, management, and control Quality assurance and BIM to ISO 19650 standards Working knowledge of NEC4 suite of contracts Ability to deliver carbon-efficient, DfMA design solutions Strong communication and collaboration skills Commercial and contractual awareness Programme preparation and management Knowledge of CDM (2015) Regulations Software/Tools BIM software compliant with ISO 19650 (e.g., Revit, Navisworks) Project management and design coordination tools Certifications & Standards HNC/HND or degree in relevant engineering discipline Progressing towards Chartered status with a relevant professional body Valid UK driving licence Familiarity with CDM (2015) Regulations NEC4 contract knowledge Please send CVs to (url removed)
The Health and Safety Partnership Limited
City, Leeds
Building Regulations Principal Designer (BRPD) with a building control background , required to join a national construction consultancy. They provide comprehensive commercial support and building surveying services, specifically tailored to meet the unique requirements of projects. Their diverse portfolio includes redevelopments, conversions, new builds, and refurbishments in hotels, retail units, schools and universities, housing and hospitals. As a Building Regulations Principal Designer, you will take a lead role in managing and coordinating design risk across the lifecycle of projects, ensuring full compliance with current legislation and contributing to its safe delivery. You ll work closely with clients, designers and contractors to ensure design safety and regulatory compliance from conception through to completion. Duties will include: Providing guidance and support in fulfilling designer and principal designer responsibilities under the Building Regulations for both HRB and non-HRB projects. Developing, implementing and managing processes, strategies and documentation to demonstrate compliance with Building Regulations. Addressing Building Regulations design queries and actively contributing to collaborative, solution-focused outcomes. Qualifications Degree or HNC/HND in one of the following: Building Control, Building Surveying, Construction Management, Civil Engineering or Architecture. Working towards or holding a professional membership e.g. RICS, CABE, CIOB or CMaPS is beneficial. Experience Proven experience in Building Control or Building Regulations compliance is essential. In-depth knowledge of UK Building Regulations and construction processes. Experience working on Higher-Risk Buildings (HRBs) is beneficial. If you come from a Building Control background and have a strong understanding of the Building Safety Act 2022 and associated regulations, this is an exciting opportunity to apply your expertise in a key leadership and advisory role. The company are paying £50k-£60k plus pension and private healthcare.
Sep 03, 2025
Full time
Building Regulations Principal Designer (BRPD) with a building control background , required to join a national construction consultancy. They provide comprehensive commercial support and building surveying services, specifically tailored to meet the unique requirements of projects. Their diverse portfolio includes redevelopments, conversions, new builds, and refurbishments in hotels, retail units, schools and universities, housing and hospitals. As a Building Regulations Principal Designer, you will take a lead role in managing and coordinating design risk across the lifecycle of projects, ensuring full compliance with current legislation and contributing to its safe delivery. You ll work closely with clients, designers and contractors to ensure design safety and regulatory compliance from conception through to completion. Duties will include: Providing guidance and support in fulfilling designer and principal designer responsibilities under the Building Regulations for both HRB and non-HRB projects. Developing, implementing and managing processes, strategies and documentation to demonstrate compliance with Building Regulations. Addressing Building Regulations design queries and actively contributing to collaborative, solution-focused outcomes. Qualifications Degree or HNC/HND in one of the following: Building Control, Building Surveying, Construction Management, Civil Engineering or Architecture. Working towards or holding a professional membership e.g. RICS, CABE, CIOB or CMaPS is beneficial. Experience Proven experience in Building Control or Building Regulations compliance is essential. In-depth knowledge of UK Building Regulations and construction processes. Experience working on Higher-Risk Buildings (HRBs) is beneficial. If you come from a Building Control background and have a strong understanding of the Building Safety Act 2022 and associated regulations, this is an exciting opportunity to apply your expertise in a key leadership and advisory role. The company are paying £50k-£60k plus pension and private healthcare.
The Health and Safety Partnership Limited
Worcester, Worcestershire
Building Regulations Principal Designer (BRPD) with a building control background , required to join a national construction consultancy. They provide comprehensive commercial support and building surveying services, specifically tailored to meet the unique requirements of projects. Their diverse portfolio includes redevelopments, conversions, new builds, and refurbishments in hotels, retail units, schools and universities, housing and hospitals. As a Building Regulations Principal Designer, you will take a lead role in managing and coordinating design risk across the lifecycle of projects, ensuring full compliance with current legislation and contributing to its safe delivery. You ll work closely with clients, designers and contractors to ensure design safety and regulatory compliance from conception through to completion. Duties will include: Providing guidance and support in fulfilling designer and principal designer responsibilities under the Building Regulations for both HRB and non-HRB projects. Developing, implementing and managing processes, strategies and documentation to demonstrate compliance with Building Regulations. Addressing Building Regulations design queries and actively contributing to collaborative, solution-focused outcomes. Qualifications Degree or HNC/HND in one of the following: Building Control, Building Surveying, Construction Management, Civil Engineering or Architecture. Working towards or holding a professional membership e.g. RICS, CABE, CIOB or CMaPS is beneficial. Experience Proven experience in Building Control or Building Regulations compliance is essential. In-depth knowledge of UK Building Regulations and construction processes. Experience working on Higher-Risk Buildings (HRBs) is beneficial. If you come from a Building Control background and have a strong understanding of the Building Safety Act 2022 and associated regulations, this is an exciting opportunity to apply your expertise in a key leadership and advisory role. The company are paying £50k-£60k including pension and private healthcare.
Sep 03, 2025
Full time
Building Regulations Principal Designer (BRPD) with a building control background , required to join a national construction consultancy. They provide comprehensive commercial support and building surveying services, specifically tailored to meet the unique requirements of projects. Their diverse portfolio includes redevelopments, conversions, new builds, and refurbishments in hotels, retail units, schools and universities, housing and hospitals. As a Building Regulations Principal Designer, you will take a lead role in managing and coordinating design risk across the lifecycle of projects, ensuring full compliance with current legislation and contributing to its safe delivery. You ll work closely with clients, designers and contractors to ensure design safety and regulatory compliance from conception through to completion. Duties will include: Providing guidance and support in fulfilling designer and principal designer responsibilities under the Building Regulations for both HRB and non-HRB projects. Developing, implementing and managing processes, strategies and documentation to demonstrate compliance with Building Regulations. Addressing Building Regulations design queries and actively contributing to collaborative, solution-focused outcomes. Qualifications Degree or HNC/HND in one of the following: Building Control, Building Surveying, Construction Management, Civil Engineering or Architecture. Working towards or holding a professional membership e.g. RICS, CABE, CIOB or CMaPS is beneficial. Experience Proven experience in Building Control or Building Regulations compliance is essential. In-depth knowledge of UK Building Regulations and construction processes. Experience working on Higher-Risk Buildings (HRBs) is beneficial. If you come from a Building Control background and have a strong understanding of the Building Safety Act 2022 and associated regulations, this is an exciting opportunity to apply your expertise in a key leadership and advisory role. The company are paying £50k-£60k including pension and private healthcare.
The Health and Safety Partnership Limited
City, Liverpool
Associate Director CDM / Construction Safety Location: Flexible Hybrid (North West HQ 2 days/week) Salary: £80,000 £90,000 + £8,500 Car Allowance + Pension + Private Health + Life Insurance Progression: Clear path to Director-level An award-winning consultancy dedicated exclusively to the construction safety sector is seeking an experienced Associate Director to join their growing team. With a business unit turnover exceeding £3m and a strong team of 12+ CDM Principal Designers as part of the larger business, this is an opportunity to play a pivotal role in leading and shaping the business. The company specialises in: Construction Health & Safety CDM 2015 Principal Designer Services Building Regulations Principal Designer Related advisory services The Role A s Associate Director, y ou will report directly to the Board and take full leadership of a dedicated business unit, overseeing project delivery, team performance, and client relationships. You will lead the delivery of CDM Principal Designer services across a broad and varied project portfolio ensuring safety and compliance are embedded throughout the design and construction process. This is a senior leadership position , requiring strategic insight, operational excellence, and a strong technical background in CDM 2015 regulations. Key Responsibilities Lead and manage the Principal Designer function across all projects, ensuring full compliance with CDM 2015 a nd relevant legislation. Act as the key contact and advisor for CDM-related guidance to clients, designers, contractors, and internal teams. Develop and implement CDM strategies and risk management procedures throughout the project lifecycle. Oversee the preparation and review of Pre-Construction Information and Health and Safety Files. Chair design risk reviews and workshops championing a safety-first approach throughout project development. Lead, mentor, and develop a growing team of CDM professionals, promoting excellence and consistency. Support business growth by preparing and delivering impactful sales presentations, bids, and fee proposals. This is supported by the Bid, tech and marketing team. Enhance company visibility by delivering training sessions and engaging with third-party stakeholders. Attend and represent the business at face-to-face client and supplier meetings. Continuously improve the delivery and efficiency of CDM and Principal Designer services. Experience & Background Proven experience as a Principal Designer under CDM 2015, ideally from a consultancy or client-side environment. In-depth knowledge of health & safety legislation across the construction and development sectors. Strong leadership and team management capabilities. Excellent stakeholder engagement and client-facing skills. Qualifications Degree or Diploma in a relevant field such as Health & Safety, Construction, or Design (preferred). Chartered or Incorporated membership of a professional body such as IOSH, APS, RICS, or CIOB (preferred). What s on Offer Competitive salary of £80,000 £90,000 £8,500 car allowance Pension , Private Healthcare , Life Insurance , and additional benefits Flexible hybrid working model (2 days per week in North West HQ) A clear and supported development pathway to Director-level This is a rare opportunity to join a respected, specialist consultancy where your leadership will shape the future of CDM and construction safety delivery across the UK.
Sep 03, 2025
Full time
Associate Director CDM / Construction Safety Location: Flexible Hybrid (North West HQ 2 days/week) Salary: £80,000 £90,000 + £8,500 Car Allowance + Pension + Private Health + Life Insurance Progression: Clear path to Director-level An award-winning consultancy dedicated exclusively to the construction safety sector is seeking an experienced Associate Director to join their growing team. With a business unit turnover exceeding £3m and a strong team of 12+ CDM Principal Designers as part of the larger business, this is an opportunity to play a pivotal role in leading and shaping the business. The company specialises in: Construction Health & Safety CDM 2015 Principal Designer Services Building Regulations Principal Designer Related advisory services The Role A s Associate Director, y ou will report directly to the Board and take full leadership of a dedicated business unit, overseeing project delivery, team performance, and client relationships. You will lead the delivery of CDM Principal Designer services across a broad and varied project portfolio ensuring safety and compliance are embedded throughout the design and construction process. This is a senior leadership position , requiring strategic insight, operational excellence, and a strong technical background in CDM 2015 regulations. Key Responsibilities Lead and manage the Principal Designer function across all projects, ensuring full compliance with CDM 2015 a nd relevant legislation. Act as the key contact and advisor for CDM-related guidance to clients, designers, contractors, and internal teams. Develop and implement CDM strategies and risk management procedures throughout the project lifecycle. Oversee the preparation and review of Pre-Construction Information and Health and Safety Files. Chair design risk reviews and workshops championing a safety-first approach throughout project development. Lead, mentor, and develop a growing team of CDM professionals, promoting excellence and consistency. Support business growth by preparing and delivering impactful sales presentations, bids, and fee proposals. This is supported by the Bid, tech and marketing team. Enhance company visibility by delivering training sessions and engaging with third-party stakeholders. Attend and represent the business at face-to-face client and supplier meetings. Continuously improve the delivery and efficiency of CDM and Principal Designer services. Experience & Background Proven experience as a Principal Designer under CDM 2015, ideally from a consultancy or client-side environment. In-depth knowledge of health & safety legislation across the construction and development sectors. Strong leadership and team management capabilities. Excellent stakeholder engagement and client-facing skills. Qualifications Degree or Diploma in a relevant field such as Health & Safety, Construction, or Design (preferred). Chartered or Incorporated membership of a professional body such as IOSH, APS, RICS, or CIOB (preferred). What s on Offer Competitive salary of £80,000 £90,000 £8,500 car allowance Pension , Private Healthcare , Life Insurance , and additional benefits Flexible hybrid working model (2 days per week in North West HQ) A clear and supported development pathway to Director-level This is a rare opportunity to join a respected, specialist consultancy where your leadership will shape the future of CDM and construction safety delivery across the UK.
The Health and Safety Partnership Limited
City, Birmingham
Associate Director CDM / Construction Safety Location: Flexible Hybrid (North West HQ 2 days/week) Salary: £80,000 £90,000 + £8,500 Car Allowance + Pension + Private Health + Life Insurance Progression: Clear path to Director-level An award-winning consultancy dedicated exclusively to the construction safety sector is seeking an experienced Associate Director to join their growing team. With a business unit turnover exceeding £3m and a strong team of 12+ CDM Principal Designers as part of the larger business, this is an opportunity to play a pivotal role in leading and shaping the business. The company specialises in: Construction Health & Safety CDM 2015 Principal Designer Services Building Regulations Principal Designer Related advisory services The Role A s Associate Director, y ou will report directly to the Board and take full leadership of a dedicated business unit, overseeing project delivery, team performance, and client relationships. You will lead the delivery of CDM Principal Designer services across a broad and varied project portfolio ensuring safety and compliance are embedded throughout the design and construction process. This is a senior leadership position , requiring strategic insight, operational excellence, and a strong technical background in CDM 2015 regulations. Key Responsibilities Lead and manage the Principal Designer function across all projects, ensuring full compliance with CDM 2015 a nd relevant legislation. Act as the key contact and advisor for CDM-related guidance to clients, designers, contractors, and internal teams. Develop and implement CDM strategies and risk management procedures throughout the project lifecycle. Oversee the preparation and review of Pre-Construction Information and Health and Safety Files. Chair design risk reviews and workshops championing a safety-first approach throughout project development. Lead, mentor, and develop a growing team of CDM professionals, promoting excellence and consistency. Support business growth by preparing and delivering impactful sales presentations, bids, and fee proposals. This is supported by the Bid, tech and marketing team. Enhance company visibility by delivering training sessions and engaging with third-party stakeholders. Attend and represent the business at face-to-face client and supplier meetings. Continuously improve the delivery and efficiency of CDM and Principal Designer services. Experience & Background Proven experience as a Principal Designer under CDM 2015, ideally from a consultancy or client-side environment. In-depth knowledge of health & safety legislation across the construction and development sectors. Strong leadership and team management capabilities. Excellent stakeholder engagement and client-facing skills. Qualifications Degree or Diploma in a relevant field such as Health & Safety, Construction, or Design (preferred). Chartered or Incorporated membership of a professional body such as IOSH, APS, RICS, or CIOB (preferred). What s on Offer Competitive salary of £80,000 £90,000 £8,500 car allowance Pension , Private Healthcare , Life Insurance , and additional benefits Flexible hybrid working model (2 days per week in North West HQ) A clear and supported development pathway to Director-level This is a rare opportunity to join a respected, specialist consultancy where your leadership will shape the future of CDM and construction safety delivery across the UK.
Sep 03, 2025
Full time
Associate Director CDM / Construction Safety Location: Flexible Hybrid (North West HQ 2 days/week) Salary: £80,000 £90,000 + £8,500 Car Allowance + Pension + Private Health + Life Insurance Progression: Clear path to Director-level An award-winning consultancy dedicated exclusively to the construction safety sector is seeking an experienced Associate Director to join their growing team. With a business unit turnover exceeding £3m and a strong team of 12+ CDM Principal Designers as part of the larger business, this is an opportunity to play a pivotal role in leading and shaping the business. The company specialises in: Construction Health & Safety CDM 2015 Principal Designer Services Building Regulations Principal Designer Related advisory services The Role A s Associate Director, y ou will report directly to the Board and take full leadership of a dedicated business unit, overseeing project delivery, team performance, and client relationships. You will lead the delivery of CDM Principal Designer services across a broad and varied project portfolio ensuring safety and compliance are embedded throughout the design and construction process. This is a senior leadership position , requiring strategic insight, operational excellence, and a strong technical background in CDM 2015 regulations. Key Responsibilities Lead and manage the Principal Designer function across all projects, ensuring full compliance with CDM 2015 a nd relevant legislation. Act as the key contact and advisor for CDM-related guidance to clients, designers, contractors, and internal teams. Develop and implement CDM strategies and risk management procedures throughout the project lifecycle. Oversee the preparation and review of Pre-Construction Information and Health and Safety Files. Chair design risk reviews and workshops championing a safety-first approach throughout project development. Lead, mentor, and develop a growing team of CDM professionals, promoting excellence and consistency. Support business growth by preparing and delivering impactful sales presentations, bids, and fee proposals. This is supported by the Bid, tech and marketing team. Enhance company visibility by delivering training sessions and engaging with third-party stakeholders. Attend and represent the business at face-to-face client and supplier meetings. Continuously improve the delivery and efficiency of CDM and Principal Designer services. Experience & Background Proven experience as a Principal Designer under CDM 2015, ideally from a consultancy or client-side environment. In-depth knowledge of health & safety legislation across the construction and development sectors. Strong leadership and team management capabilities. Excellent stakeholder engagement and client-facing skills. Qualifications Degree or Diploma in a relevant field such as Health & Safety, Construction, or Design (preferred). Chartered or Incorporated membership of a professional body such as IOSH, APS, RICS, or CIOB (preferred). What s on Offer Competitive salary of £80,000 £90,000 £8,500 car allowance Pension , Private Healthcare , Life Insurance , and additional benefits Flexible hybrid working model (2 days per week in North West HQ) A clear and supported development pathway to Director-level This is a rare opportunity to join a respected, specialist consultancy where your leadership will shape the future of CDM and construction safety delivery across the UK.
Architect / Architectural Technologist required to undertake the Principal Designer role on behalf of an Architectural practice based near Chester, Cheshire. Conrad Consulting is proud to represent a distinguished firm located near Chester, renowned for its expertise and fine reputation in the Cheshire Architectural community. This practice, comprising approximately 10 Architectural professionals, is led by an experienced and welcoming team. The firm specialises in the Residential sector, focusing on rural buildings such as barn conversions, farmhouses, and similar developments. If you are familiar with Cheshire, you will likely recognise their projects, which are scattered across the rural landscape. Their portfolio often includes larger schemes and masterplanning, requiring a keen eye for detail and a sensitivity to the unique character of rural architecture. They are undertaking more and more work in the role of Principal Designer to their expanding client based, ensuring projects are not only creative and efficient but also safe, compliant, and of the highest quality. Following recent project wins in various sectors, an exciting opportunity for an Architect or Architectural Technologist is available to undertake this principal Designer role on behalf of this reputable company. Key Responsibilities Architectural Design & BIM Coordination Develop and manage Architectural design packages. Produce planning and technical drawings. Project Management & Collaboration Contribute to project programmes, deliverables, and design review processes. Support client presentations, design workshops, and on-site coordination. Principal Designer & Building Safety (Desirable) Support or deliver Principal Designer duties under CDM 2015 and BSA 2022. Manage design risk registers, safety-critical information, and project safety documentation. Liaise with clients, contractors, and regulators to integrate safety into the design from the outset. Requirements Qualified Architect, CIAT Technologist, or Architectural Technician. Knowledge of Building Regulations, CDM 2015, and ideally BSA 2022 (desirable). Excellent communication, organisation, and collaboration skills. Experience within the Residential sector is desirable. This role is in it's early stages, and is developing quickly into an exciting prospect for an experienced, local Architect or Technologist. We are looking to hear from applicants based with 45-minute commute of Chester, and with the aforementioned experience. Salary, benefits, etc can be discussed with your Recruitment Consultant, Will Consulting
Sep 03, 2025
Full time
Architect / Architectural Technologist required to undertake the Principal Designer role on behalf of an Architectural practice based near Chester, Cheshire. Conrad Consulting is proud to represent a distinguished firm located near Chester, renowned for its expertise and fine reputation in the Cheshire Architectural community. This practice, comprising approximately 10 Architectural professionals, is led by an experienced and welcoming team. The firm specialises in the Residential sector, focusing on rural buildings such as barn conversions, farmhouses, and similar developments. If you are familiar with Cheshire, you will likely recognise their projects, which are scattered across the rural landscape. Their portfolio often includes larger schemes and masterplanning, requiring a keen eye for detail and a sensitivity to the unique character of rural architecture. They are undertaking more and more work in the role of Principal Designer to their expanding client based, ensuring projects are not only creative and efficient but also safe, compliant, and of the highest quality. Following recent project wins in various sectors, an exciting opportunity for an Architect or Architectural Technologist is available to undertake this principal Designer role on behalf of this reputable company. Key Responsibilities Architectural Design & BIM Coordination Develop and manage Architectural design packages. Produce planning and technical drawings. Project Management & Collaboration Contribute to project programmes, deliverables, and design review processes. Support client presentations, design workshops, and on-site coordination. Principal Designer & Building Safety (Desirable) Support or deliver Principal Designer duties under CDM 2015 and BSA 2022. Manage design risk registers, safety-critical information, and project safety documentation. Liaise with clients, contractors, and regulators to integrate safety into the design from the outset. Requirements Qualified Architect, CIAT Technologist, or Architectural Technician. Knowledge of Building Regulations, CDM 2015, and ideally BSA 2022 (desirable). Excellent communication, organisation, and collaboration skills. Experience within the Residential sector is desirable. This role is in it's early stages, and is developing quickly into an exciting prospect for an experienced, local Architect or Technologist. We are looking to hear from applicants based with 45-minute commute of Chester, and with the aforementioned experience. Salary, benefits, etc can be discussed with your Recruitment Consultant, Will Consulting
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 03, 2025
Full time
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Key accountabilities: Lead the Design team to deliver design to the Customer specification requirements, ensuring compliance with relevant National / International Standards and legislation. Check and approve HV plant design deliverables e.g. single line diagram, layout/Elevation drawings, MEWP access layouts, SC force calculations, earthing design / calculations etc. Lead Design work with due regard to Health & Safety Procedures and the Company's obligations in compliance with current CDM regulations. Any perceived risks and mitigation measures should be advised to Engineering Manager for effective action. Ensure all required models and drawings have an adequate level of review and approval including the supplier and subcontractor supply chains. Incorporating the best practice of BIM as established in the Engineering team. Lead the technical direction of the engineering team, taking best practice and industry developments into engineering methodology. General Responsibilities: Ensure duties are carried out in accordance with Standard Company Quality, Health & Safety and Environmental Procedures and Business Process Manuals. Delivery of engineering design to programme, quality and budgets, and lead safety and sustainability by Design into the engineering delivery. Functionally the authorised approver of designs (and associated settings) on contracts in accordance with the published design/check/approve authorisation levels Identify (and contribute to) the development and training needs of the design team as appropriate to skill level / experience. Design Responsibilities:. Identify all relevant standards and Customer requirements, ensuring compliance with relevant National / International Standards and legislation, and contract specification Design work to be undertaken with due regard to Health, Safety & Environmental Procedures and production of Designer Risk Assessments, as necessary, to fulfil the Company's obligations in compliance with current CDM regulations. AIS and GIS substation design up to 400kV. Check and approve substation design deliverables e.g. single line diagram, layout/Elevation drawings, MEWP access layouts, SC force calculations, earthing design / calculations etc. To carry out Contractor Design Approval Engineer (CDAE), as defined by National Grid's procedures, or equivalent role as defined by other clients. Ability to perform Principal Designer representative (PD Rep) role as per CDM 2015 regulation Check and review equipment tech specs and engagement with supplier for their offer validation Examine contract documentation and establish the Company's scope of work including termination boundaries. Where this differs with the tendered contract requirement then these differences should be highlighted to the Project / Engineering Manager with options and solutions for resolutions. Planning Responsibilities Input into the allocation of work packages, coordinate workload and agree priorities withing the Primary Plant Team. Prepare, contribute to, check and review DEMP (Design and Engineering Management Plans). Ensure the team understands and is working in accordance with the GMEE (Group Minimum Engineering Expectations). Upon contract award, liaise and co-ordinate contract requirements with Design Engineers, Project and engineering managers and other Our client'a PT&DDepartments at earliest opportunity. Establish Design content of work package and the Design resource to achieve the required time scales, in line with Project Programme. Education & other qualifications: Graduate in Electrical Engineering or equivalent. Charted engineer or working towards. Member of IET (MIET). Experience: Working in a Design Office environment over 10 years of experience. Liaising with customers and suppliers. Calculations to demonstrate integrity of designs. Overall design and specification of electrical power systems and associated power system components. Experience as a senior HV Substation Primary Plant Design Engineer. Basic understanding of P&C aspects preferable. TP141 HV Substation qualification is an advantage. Proven experience in a responsible position and knowledge in HV substation equipments e.g. HV plant, transformers etc. BIM 360 experience and knowledge. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Sep 02, 2025
Contractor
Key accountabilities: Lead the Design team to deliver design to the Customer specification requirements, ensuring compliance with relevant National / International Standards and legislation. Check and approve HV plant design deliverables e.g. single line diagram, layout/Elevation drawings, MEWP access layouts, SC force calculations, earthing design / calculations etc. Lead Design work with due regard to Health & Safety Procedures and the Company's obligations in compliance with current CDM regulations. Any perceived risks and mitigation measures should be advised to Engineering Manager for effective action. Ensure all required models and drawings have an adequate level of review and approval including the supplier and subcontractor supply chains. Incorporating the best practice of BIM as established in the Engineering team. Lead the technical direction of the engineering team, taking best practice and industry developments into engineering methodology. General Responsibilities: Ensure duties are carried out in accordance with Standard Company Quality, Health & Safety and Environmental Procedures and Business Process Manuals. Delivery of engineering design to programme, quality and budgets, and lead safety and sustainability by Design into the engineering delivery. Functionally the authorised approver of designs (and associated settings) on contracts in accordance with the published design/check/approve authorisation levels Identify (and contribute to) the development and training needs of the design team as appropriate to skill level / experience. Design Responsibilities:. Identify all relevant standards and Customer requirements, ensuring compliance with relevant National / International Standards and legislation, and contract specification Design work to be undertaken with due regard to Health, Safety & Environmental Procedures and production of Designer Risk Assessments, as necessary, to fulfil the Company's obligations in compliance with current CDM regulations. AIS and GIS substation design up to 400kV. Check and approve substation design deliverables e.g. single line diagram, layout/Elevation drawings, MEWP access layouts, SC force calculations, earthing design / calculations etc. To carry out Contractor Design Approval Engineer (CDAE), as defined by National Grid's procedures, or equivalent role as defined by other clients. Ability to perform Principal Designer representative (PD Rep) role as per CDM 2015 regulation Check and review equipment tech specs and engagement with supplier for their offer validation Examine contract documentation and establish the Company's scope of work including termination boundaries. Where this differs with the tendered contract requirement then these differences should be highlighted to the Project / Engineering Manager with options and solutions for resolutions. Planning Responsibilities Input into the allocation of work packages, coordinate workload and agree priorities withing the Primary Plant Team. Prepare, contribute to, check and review DEMP (Design and Engineering Management Plans). Ensure the team understands and is working in accordance with the GMEE (Group Minimum Engineering Expectations). Upon contract award, liaise and co-ordinate contract requirements with Design Engineers, Project and engineering managers and other Our client'a PT&DDepartments at earliest opportunity. Establish Design content of work package and the Design resource to achieve the required time scales, in line with Project Programme. Education & other qualifications: Graduate in Electrical Engineering or equivalent. Charted engineer or working towards. Member of IET (MIET). Experience: Working in a Design Office environment over 10 years of experience. Liaising with customers and suppliers. Calculations to demonstrate integrity of designs. Overall design and specification of electrical power systems and associated power system components. Experience as a senior HV Substation Primary Plant Design Engineer. Basic understanding of P&C aspects preferable. TP141 HV Substation qualification is an advantage. Proven experience in a responsible position and knowledge in HV substation equipments e.g. HV plant, transformers etc. BIM 360 experience and knowledge. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
BIM Manager / Digital Lead Leeds - UK Remit Permanent Summary We are recruiting for a hugely exciting leadership role as Freedom's National BIM Manager / Digital Lead. The role will be flexibly based out of our Leeds Head Office (hybrid) and work on projects exclusively within the UK on behalf of Freedom Professional Services. You will join a market leading design business working on a range of net-zero focussed distribution and transmission green energy frameworks and projects. This role is critical to the growth of our business as part of our 'Journey to 2030' strategy and you will join as part of our digital leadership team. We are looking for someone who has experience as a client advisor, and expert in delivering end-to-end BIM projects and services, whilst also acting as an internal SME to develop BIM people, processes and products, maturing market capability. It is desirable that the candidate can demonstrate clear experience of delivering BIM scope of services development and consequential business growth. As well as demonstrable evidence of internal team capability development. Ideally someone who has previously been a key enabler and senior advisor of BIM to a cross-discipline leadership team. Additionally, it is advantageous for a candite to have previously held a SLT or senior management role and is comfortable with line management of a multi disciplined team of varied BIM skillsets and software usage. This role will be responsible for the successful implementation of BIM project management and delivery of design practices according to the ISO 19650 series. Exploring and developing workflows that streamline project delivery and reporting but also develop solutions to global industry challenges such as carbon reduction, de-risking through VDC simulation, and quantity/material planning. Some of the key deliverables in this role will include: Provide leadership for the BIM service function within Freedom Group. Driving forward the adoption of digital solutions to support Freedom's wider Digital Strategy. Lead & co-ordinate the collaboration of multiple project stakeholders and teams to promote adoption of fit for purpose digital solutions during project mobilisation and delivery. Be a key client-facing expert as a direct point of contact on technical delivery of work with strong interpersonal skills. Collaborate with project teams and engineering disciplines to integrate BIM & digital construction methodologies into planning, design, construction, and ensure successful project handover. Host project coordination review meetings, using the 3D model as a discussion tool. Using BIM models to highlight clashes, variations, and risks, ensuring effective communication within the team. Define, configure and implement companywide BIM standards and identify BIM software/systems requirements. Provide tender stage support, creation of BIM execution plans, and BIM resource cost estimates to the bid team. To support the business technically, highlighting opportunities and minimising risk (particularly at tender stage) by providing policy, review, education and support. Develop BIM skillsets within the team in relation to software, power distribution/transmission modelling methodologies and information exchange utilising ISO 19650. Champion BIM education and build companywide understanding of the benefits of digital ways of workings at all project stages. Demonstrate appropriate CDM & Principal designer Health and Safety awareness to ensure that the safety first and foremost message is visible and alive throughout all activities relating to the project on which you are working. Develop knowledge of HV/LV systems to ensure optimised solutions and CDM compliance. Develop and embed 4D/5D/6D/information system methodologies and solutions. Undertake site visits to gain practical experience of HV/LV installation practices and apply these to improve modelling and coordination effectiveness. Maintain technical capability, stay up to date with industry standards and support continuous learning , understanding, and technical development. What we're looking for : Strong leadership and collaboration skills. Creative thinker with a passion for emerging technologies and solving complex problems. Process orientated, methodical leader with excellent communication skills Understands the "bigger picture" of project delivery and management workflows to identify opportunities for improvement. Proficiency in common industry design authoring tools (Autodesk Suite, Bentley Suite, Trimble Suite, Dalux Suite) Proficiency in design coordination tools (Navisworks, Solibri, Plannerly) Proficiency in issue management tools (Revizto, BIMCollab, Newforma Konekt) Ability to communicate effectively with team members from apprentices to C-suite. Proficient in delivering results within short timeframes, prioritising tasks and managing your time efficiently. Be able to deliver technical models in an HV/LV electrical engineering space. Experience in authoring 3D models in a common data environment platform (Autodesk Construction Cloud/Bentley ProjectWise/Viewpoint) An understanding of setting up workflows within a common data environment platform (Autodesk Construction Cloud / Bentley ProjectWise / Trimble Viewpoint) and managing BIM data throughout the project lifecycle. Understanding of key principles of information management as set out in ISO 19650. Experience utilising Dynamo & other design automation tools. Awareness of the BIM toolset marketplace and ability to critically evaluate and implement best-fit solutions for the benefit of the team. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Pension with a leading provider and up to 8% employer contributionPersonal Wellbeing and Volunteer Days Private Medical InsuranceFree 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice)Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Tra
Sep 02, 2025
Full time
BIM Manager / Digital Lead Leeds - UK Remit Permanent Summary We are recruiting for a hugely exciting leadership role as Freedom's National BIM Manager / Digital Lead. The role will be flexibly based out of our Leeds Head Office (hybrid) and work on projects exclusively within the UK on behalf of Freedom Professional Services. You will join a market leading design business working on a range of net-zero focussed distribution and transmission green energy frameworks and projects. This role is critical to the growth of our business as part of our 'Journey to 2030' strategy and you will join as part of our digital leadership team. We are looking for someone who has experience as a client advisor, and expert in delivering end-to-end BIM projects and services, whilst also acting as an internal SME to develop BIM people, processes and products, maturing market capability. It is desirable that the candidate can demonstrate clear experience of delivering BIM scope of services development and consequential business growth. As well as demonstrable evidence of internal team capability development. Ideally someone who has previously been a key enabler and senior advisor of BIM to a cross-discipline leadership team. Additionally, it is advantageous for a candite to have previously held a SLT or senior management role and is comfortable with line management of a multi disciplined team of varied BIM skillsets and software usage. This role will be responsible for the successful implementation of BIM project management and delivery of design practices according to the ISO 19650 series. Exploring and developing workflows that streamline project delivery and reporting but also develop solutions to global industry challenges such as carbon reduction, de-risking through VDC simulation, and quantity/material planning. Some of the key deliverables in this role will include: Provide leadership for the BIM service function within Freedom Group. Driving forward the adoption of digital solutions to support Freedom's wider Digital Strategy. Lead & co-ordinate the collaboration of multiple project stakeholders and teams to promote adoption of fit for purpose digital solutions during project mobilisation and delivery. Be a key client-facing expert as a direct point of contact on technical delivery of work with strong interpersonal skills. Collaborate with project teams and engineering disciplines to integrate BIM & digital construction methodologies into planning, design, construction, and ensure successful project handover. Host project coordination review meetings, using the 3D model as a discussion tool. Using BIM models to highlight clashes, variations, and risks, ensuring effective communication within the team. Define, configure and implement companywide BIM standards and identify BIM software/systems requirements. Provide tender stage support, creation of BIM execution plans, and BIM resource cost estimates to the bid team. To support the business technically, highlighting opportunities and minimising risk (particularly at tender stage) by providing policy, review, education and support. Develop BIM skillsets within the team in relation to software, power distribution/transmission modelling methodologies and information exchange utilising ISO 19650. Champion BIM education and build companywide understanding of the benefits of digital ways of workings at all project stages. Demonstrate appropriate CDM & Principal designer Health and Safety awareness to ensure that the safety first and foremost message is visible and alive throughout all activities relating to the project on which you are working. Develop knowledge of HV/LV systems to ensure optimised solutions and CDM compliance. Develop and embed 4D/5D/6D/information system methodologies and solutions. Undertake site visits to gain practical experience of HV/LV installation practices and apply these to improve modelling and coordination effectiveness. Maintain technical capability, stay up to date with industry standards and support continuous learning , understanding, and technical development. What we're looking for : Strong leadership and collaboration skills. Creative thinker with a passion for emerging technologies and solving complex problems. Process orientated, methodical leader with excellent communication skills Understands the "bigger picture" of project delivery and management workflows to identify opportunities for improvement. Proficiency in common industry design authoring tools (Autodesk Suite, Bentley Suite, Trimble Suite, Dalux Suite) Proficiency in design coordination tools (Navisworks, Solibri, Plannerly) Proficiency in issue management tools (Revizto, BIMCollab, Newforma Konekt) Ability to communicate effectively with team members from apprentices to C-suite. Proficient in delivering results within short timeframes, prioritising tasks and managing your time efficiently. Be able to deliver technical models in an HV/LV electrical engineering space. Experience in authoring 3D models in a common data environment platform (Autodesk Construction Cloud/Bentley ProjectWise/Viewpoint) An understanding of setting up workflows within a common data environment platform (Autodesk Construction Cloud / Bentley ProjectWise / Trimble Viewpoint) and managing BIM data throughout the project lifecycle. Understanding of key principles of information management as set out in ISO 19650. Experience utilising Dynamo & other design automation tools. Awareness of the BIM toolset marketplace and ability to critically evaluate and implement best-fit solutions for the benefit of the team. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Pension with a leading provider and up to 8% employer contributionPersonal Wellbeing and Volunteer Days Private Medical InsuranceFree 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice)Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Tra
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 02, 2025
Full time
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 02, 2025
Full time
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 02, 2025
Full time
Job Title: Principal C&I Engineer - Nuclear Location: Barrow-In-Furness (2 days minimum on site per fortnight). We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Support the development of the nuclear C&I design for SSNA Develop the technical and programmatic interfaces between BAES and third parties Work with a complex relationship of stakeholders to provide oversight in the delivery of the vehicle control solution, and the supporting vehicle control strategy Collaborate with the engineering manager in the delivery of the Primary Propulsion C&I system, reporting suitable progress through agile toolsets Deliver the response to the engineering delivery plan, ensuring that the plan is delivered to schedule Provide guidance and instruction on the engineering methods/process to deliver the engineering delivery plan Work with the Engineering Delivery Team with varying levels of SQEP to develop technical solutions, developing the team members and nurturing their development Engage with legacy stakeholders in the development of a technical solution from a known baseline design Your skills and experiences: Essential Background in the nuclear sector, with hands-on experience in safety-critical environments Designed large-scale C&I systems, ensuring compliance with functional, defence, and industrial standards Managed non-functional requirements such as EMC and shock, meeting stringent industrial compliance criteria Authored and reviewed key design documentation, including I/O schedules, functional design specifications, functional chronicles, and interface control documents Holds a degree-level qualification (or equivalent experience) in a relevant STEM field such as Engineering, Physics, Mathematics, or Science Desirable: Understanding of control system architecture and communication protocols (i.e. RS-485, PROFIBUS) History in IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Complex Systems - C&I Embed team: You will be working with a multitude of stakeholders to develop the design of the C&I for the Royal Navy's next generation attack class submarine. The Platform Complex Systems team a team ranging from engineers, designers and supporting functions with a range of experiences from graduates through to principal engineers. The Platform Complex Systems team is responsible for the delivery of 28+ C&I and Internal Communication Systems plus are responsible for the technical co-ordination and delivery of over 80+ C&I systems. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
About The Role Role Overview: proAV are a leading global audio visual integrator, providing AV and event services across multiple client partnerships globally. Our immediate requirement is for an experienced AV Event Technician to be a key part of our London team, representing proAV and working onsite at Global Investment Company. One of many openings available at proAV (who have over 500 team members globally), this position is based within our end user s organisation who continue to invest in state-of-the-art technologies, services, and training. This is an exciting opportunity for an exceptional, experienced Senior AV Event Technician to join an established operation with scope to drive and enhance the service at every opportunity. Experience and seniority of the position will be reflected by the remuneration and benefits package. Key Responsibilities: Track and manage all AV Event requests via client booking portal Direct & manage all onsite events within large Presentation & Event spaces Provide white glove service that manages technical logistics for large complex events, Town halls, special events and VIP s video meetings Conduct planning meetings with client event organisers to ensure the correct technology is being used, leading to successful meetings/events Generate daily reports and contact VIP clients to establish full nature of meeting & requirements equipment / meeting room set ups as required Devise, document, maintain and implement operating procedures for key event spaces Mentor AV Technicians to cover / support events as required Conduct client debrief, obtaining customer feedback and discuss areas for continual improvement Work with vendors for AV rental and staging of events (as required) Work closely with offsite events team to ensure all event requirements are captured and managed effectively for both onsite and offsite events throughout as required Locate faults or problems and provide solutions on a second / third line basis Ability to provide systems work around in the event of failures Ensure fault tickets are logged via client ticketing portal and resolved within SLA. Support / manage software / firmware updates once instructed / change control Ensure all equipment faults and requests are reported via onsite procedures Manage equipment repairs within key event spaces in collaboration with technical manager and implement critical spares as required Studio: Setup, testing, operation, and break down of Studio equipment; (e.g. cameras, audio and vision mixing equipment, microphones, studio lighting. Provide advice and support on an individual basis to users at all levels of seniority on studio equipment, connectivity and applications where appropriate Support and consider the longer term strategic plans for the studio and how it supports the business internally and externally Act and advise as a production consultant for any key larger events such as company results or externally beneficial events Work closely with client teams / primary stakeholders to support all filming and editing requests. Support and advise on the successful creation and delivery of any filming sessions whether internal, external, recorded or live. Edit, upload and deliver content in a variety of ways including onto the company content management system and externally using approved mechanisms as appropriate Effectively manage the studio time (using specific software?)to ensure all filming and editing requests can be handled and delivered in a timely fashion. Troubleshoot studio related technology issues (inc cameras, control systems, lighting, audio and screens) to complete resolution when issues occur Experience and Qualifications: Ideally experienced and qualified in some or most of the following: Axis CTS, QSYS Level 1 Designer, Cisco, Samsung, Shure Level 1 institute, Yamaha, Dante, QSYS Level 1 Designer, Shure Level 1 institute, Lightware MX2M, Extron About Us: proAV designs, integrates and supports blended technology solutions with AV, UC and beyond including end-to-end services and 24/7/365 support to enhance global collaboration and empower your world of communication. From reviewing technology to integration to post-deployment support, you re in safe hands when you trust your AV and UC to proAV. We are recognised as one of the AV industry s most powerful international delivery and support operations trusted by a varied client base in more than 80 countries across 6 continents. To date, we have completed 700+ projects outside of the UK that meets the demands and challenges of a globalised marketplace, keeping the lines of communication and collaboration open. From our state-of-the-art Customer Services Centre and Video Network Operations Centre (VNOC) our dedicated teams manage, monitor and protect our global clients business-critical AV systems architecture, products and technologies 24/7/365. Equal Opportunities: proAV are an equal opportunities employer, committed to promoting diversity and inclusion in the workplace and for job applicants, and are encouraged regardless of age, disability, gender identity, marital or civil partnership status, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. We aim to create a working environment in which all individuals can make best use of their skills, free from discrimination or harassment, and that we understand, recognise, respect and value differences so that all decisions are based upon merit. The principals of non-discrimination and equality of opportunity, diversity and inclusion also apply to the way in which we treat visitors, clients, customers, suppliers, and workers.
Sep 02, 2025
Full time
About The Role Role Overview: proAV are a leading global audio visual integrator, providing AV and event services across multiple client partnerships globally. Our immediate requirement is for an experienced AV Event Technician to be a key part of our London team, representing proAV and working onsite at Global Investment Company. One of many openings available at proAV (who have over 500 team members globally), this position is based within our end user s organisation who continue to invest in state-of-the-art technologies, services, and training. This is an exciting opportunity for an exceptional, experienced Senior AV Event Technician to join an established operation with scope to drive and enhance the service at every opportunity. Experience and seniority of the position will be reflected by the remuneration and benefits package. Key Responsibilities: Track and manage all AV Event requests via client booking portal Direct & manage all onsite events within large Presentation & Event spaces Provide white glove service that manages technical logistics for large complex events, Town halls, special events and VIP s video meetings Conduct planning meetings with client event organisers to ensure the correct technology is being used, leading to successful meetings/events Generate daily reports and contact VIP clients to establish full nature of meeting & requirements equipment / meeting room set ups as required Devise, document, maintain and implement operating procedures for key event spaces Mentor AV Technicians to cover / support events as required Conduct client debrief, obtaining customer feedback and discuss areas for continual improvement Work with vendors for AV rental and staging of events (as required) Work closely with offsite events team to ensure all event requirements are captured and managed effectively for both onsite and offsite events throughout as required Locate faults or problems and provide solutions on a second / third line basis Ability to provide systems work around in the event of failures Ensure fault tickets are logged via client ticketing portal and resolved within SLA. Support / manage software / firmware updates once instructed / change control Ensure all equipment faults and requests are reported via onsite procedures Manage equipment repairs within key event spaces in collaboration with technical manager and implement critical spares as required Studio: Setup, testing, operation, and break down of Studio equipment; (e.g. cameras, audio and vision mixing equipment, microphones, studio lighting. Provide advice and support on an individual basis to users at all levels of seniority on studio equipment, connectivity and applications where appropriate Support and consider the longer term strategic plans for the studio and how it supports the business internally and externally Act and advise as a production consultant for any key larger events such as company results or externally beneficial events Work closely with client teams / primary stakeholders to support all filming and editing requests. Support and advise on the successful creation and delivery of any filming sessions whether internal, external, recorded or live. Edit, upload and deliver content in a variety of ways including onto the company content management system and externally using approved mechanisms as appropriate Effectively manage the studio time (using specific software?)to ensure all filming and editing requests can be handled and delivered in a timely fashion. Troubleshoot studio related technology issues (inc cameras, control systems, lighting, audio and screens) to complete resolution when issues occur Experience and Qualifications: Ideally experienced and qualified in some or most of the following: Axis CTS, QSYS Level 1 Designer, Cisco, Samsung, Shure Level 1 institute, Yamaha, Dante, QSYS Level 1 Designer, Shure Level 1 institute, Lightware MX2M, Extron About Us: proAV designs, integrates and supports blended technology solutions with AV, UC and beyond including end-to-end services and 24/7/365 support to enhance global collaboration and empower your world of communication. From reviewing technology to integration to post-deployment support, you re in safe hands when you trust your AV and UC to proAV. We are recognised as one of the AV industry s most powerful international delivery and support operations trusted by a varied client base in more than 80 countries across 6 continents. To date, we have completed 700+ projects outside of the UK that meets the demands and challenges of a globalised marketplace, keeping the lines of communication and collaboration open. From our state-of-the-art Customer Services Centre and Video Network Operations Centre (VNOC) our dedicated teams manage, monitor and protect our global clients business-critical AV systems architecture, products and technologies 24/7/365. Equal Opportunities: proAV are an equal opportunities employer, committed to promoting diversity and inclusion in the workplace and for job applicants, and are encouraged regardless of age, disability, gender identity, marital or civil partnership status, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. We aim to create a working environment in which all individuals can make best use of their skills, free from discrimination or harassment, and that we understand, recognise, respect and value differences so that all decisions are based upon merit. The principals of non-discrimination and equality of opportunity, diversity and inclusion also apply to the way in which we treat visitors, clients, customers, suppliers, and workers.
UX Designer Based at client locations, working remotely, or based in our Godalming or Milton Keynes offices. Salary Negotiable, DoE, plus company benefits. About Us Triad Group Plc is an award-winning digital, data, and solutions consultancy with over 35 years' experience primarily serving the UK public sector and central government. We deliver high-quality solutions that make a real difference to users, citizens and consumers. At Triad, collaboration thrives, knowledge is shared, and every voice matters. Our close-knit, supportive culture ensures you're valued from day one. Whether working with cutting-edge tech' or shaping strategy for national-scale projects, you'll be trusted, challenged, and empowered to grow. We nurture learning through communities of practice and encourage creativity, autonomy, and innovation. If you're passionate about solving meaningful problems with smart and passionate, people, Triad could be the place for you. Glassdoor score of 4.7 96% of our staff would recommend Triad to a friend 100% CEO approval See for yourself some of the work that makes us all so proud: Helping law enforcement with secure intelligence systems that keep the UK safe Supporting the UK's national meteorological service in leveraging supercomputers for next-level weather forecasting Assisting the British government department that is responsible for the safety of consumer products, with systems to track unsafe products Powering systems that help the government monitor and reduce greenhouse gas emissions from commercial transport Role Summary As a UX Designer at Triad, you will play a significant role in our client assignments. You will seek to align multiple perspectives by providing coherent views of how best to build and deliver services as well as defining and developing the UX language of Triad. You should be an articulate and creative designer who can research and define user needs as well as solve the problems users face when interacting with business processes and IT systems. A strong portfolio of successful UX work is essential. Could you be Triad's next "Rising Star of the Year?" Our very own Head of UX, Lucille Harvey, was recognised for personal excellence at "The Chartered Institute for IT & Computing Awards." Key Responsibilities: User research: Plan and conduct user research with appropriate methods including user interviews and surveys to address research problems, establish user needs, highlight pain points and identify opportunities to improve user experiences. Analysis: Use appropriate methods to analyse research and triangulate findings across multiple research outputs. Producing artefacts: Decide upon and produce artefacts based on the research and design including personas, user journeys, and service blueprints. Design and iteration: Create wireframes and designs using various levels of fidelity as appropriate and collate feedback to iterate these designs. Prototyping: Create interactive prototypes to different levels of fidelity to be able to test design options. Workshops: Initiate, plan and conduct workshops with stakeholders and users. Stakeholder collaboration: Work with stakeholders, users, business analysts, technical teams and product owners to shape and develop the user experience. Usability testing: Initiate, plan, conduct and analyse usability testing to evaluate digital systems and services. Accessibility and inclusion: Ensure research activities are inclusive (for accessibility and digital literacy needs) and designed to ensure services adhere to WCAG 2.2. Information architecture and navigation: Research for and design the information architecture to ensure users can navigate successfully. Measuring success: Work with stakeholders to define success metrics so that services can continually iterate. Agile working: Work and collaborate across multi-disciplinary teams using agile methods. Advocacy and education: Advocate for and educate client teams about user-centred design including upskilling and mentoring. Best practice and community: Be part of and contribute to the Community of Practice to ensure it develops alongside developments in the industry. Skills and Experience: Deep analytical thinking with a strong ability to communicate insights clearly through presentations and reports. Skilled in designing accessible systems and services, with a good understanding of WCAG 2.2 guidelines and inclusive design for users with varying levels of digital literacy (desirable). Experienced in creating intuitive, user-friendly digital experiences backed by solid user research and usability testing, with the ability to extract and present actionable insights. Proficient in prototyping and design tools including Figma, Adobe XD, Axure, and Balsamiq. Familiar with research and analysis tools such as Dovetail, Mural, and Microsoft Forms. Knowledge of front-end technologies (HTML, CSS, JavaScript) and analytical tools like Google Analytics (both desirable). Comfortable working within Agile frameworks and collaborating across multidisciplinary teams. Experience working with Government Digital Service (GDS) standards and practices (desirable). A portfolio of UX work is available on request . Qualifications & Certifications: A degree or equivalent qualification related to the area you work in - Desirable. Due to the nature of this position, you must be willing and eligible to achieve a minimum of SC clearance. To be eligible, you must have been a resident in the UK for a minimum of 5 years and have the right to work in the UK. Triad's Commitment to You As a growing and ambitious company, Triad prioritises your development and well-being: Continuous Training & Development: Access to top-rated Udemy Business courses. Work Environment: Collaborative, creative, and free from discrimination. Benefits: 25 days of annual leave, plus bank holidays. Matched pension contributions (5%). Private healthcare with Bupa. Gym membership support or Lakeshore Fitness access. Perkbox membership. Cycle-to-work scheme. What Our Colleagues Have to Say Please see for yourself on Glass Door and our "Day in the Life" videos at the bottom of our Careers Page Our Selection Process After applying for the role, our in-house talent team will contact you to discuss Triad and the position. If shortlisted, you will be invited for: An interview with our Head of UX, including a career review and cultural fit assessment. A workshop and interview session with our principal consultants. We aim to complete interviews and progress candidates to offer stage within 2-3 weeks of the initial conversation. Other information If this role is of interest to you or you would like further information, please contact Ryan Jordan and submit your application now! Triad is an equal opportunities employer and welcomes applications from all suitably qualified people regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion, or belief. We are proud that our recruitment process has been recognised as inclusive and accessible to disabled people who meet the minimum criteria for any role. We are a signatory on the Tech Talent Charter that aims to bring industries and organisations together to drive greater inclusion and diversity in technology roles, in addition, as a Disability Confident Leader.
Sep 02, 2025
Full time
UX Designer Based at client locations, working remotely, or based in our Godalming or Milton Keynes offices. Salary Negotiable, DoE, plus company benefits. About Us Triad Group Plc is an award-winning digital, data, and solutions consultancy with over 35 years' experience primarily serving the UK public sector and central government. We deliver high-quality solutions that make a real difference to users, citizens and consumers. At Triad, collaboration thrives, knowledge is shared, and every voice matters. Our close-knit, supportive culture ensures you're valued from day one. Whether working with cutting-edge tech' or shaping strategy for national-scale projects, you'll be trusted, challenged, and empowered to grow. We nurture learning through communities of practice and encourage creativity, autonomy, and innovation. If you're passionate about solving meaningful problems with smart and passionate, people, Triad could be the place for you. Glassdoor score of 4.7 96% of our staff would recommend Triad to a friend 100% CEO approval See for yourself some of the work that makes us all so proud: Helping law enforcement with secure intelligence systems that keep the UK safe Supporting the UK's national meteorological service in leveraging supercomputers for next-level weather forecasting Assisting the British government department that is responsible for the safety of consumer products, with systems to track unsafe products Powering systems that help the government monitor and reduce greenhouse gas emissions from commercial transport Role Summary As a UX Designer at Triad, you will play a significant role in our client assignments. You will seek to align multiple perspectives by providing coherent views of how best to build and deliver services as well as defining and developing the UX language of Triad. You should be an articulate and creative designer who can research and define user needs as well as solve the problems users face when interacting with business processes and IT systems. A strong portfolio of successful UX work is essential. Could you be Triad's next "Rising Star of the Year?" Our very own Head of UX, Lucille Harvey, was recognised for personal excellence at "The Chartered Institute for IT & Computing Awards." Key Responsibilities: User research: Plan and conduct user research with appropriate methods including user interviews and surveys to address research problems, establish user needs, highlight pain points and identify opportunities to improve user experiences. Analysis: Use appropriate methods to analyse research and triangulate findings across multiple research outputs. Producing artefacts: Decide upon and produce artefacts based on the research and design including personas, user journeys, and service blueprints. Design and iteration: Create wireframes and designs using various levels of fidelity as appropriate and collate feedback to iterate these designs. Prototyping: Create interactive prototypes to different levels of fidelity to be able to test design options. Workshops: Initiate, plan and conduct workshops with stakeholders and users. Stakeholder collaboration: Work with stakeholders, users, business analysts, technical teams and product owners to shape and develop the user experience. Usability testing: Initiate, plan, conduct and analyse usability testing to evaluate digital systems and services. Accessibility and inclusion: Ensure research activities are inclusive (for accessibility and digital literacy needs) and designed to ensure services adhere to WCAG 2.2. Information architecture and navigation: Research for and design the information architecture to ensure users can navigate successfully. Measuring success: Work with stakeholders to define success metrics so that services can continually iterate. Agile working: Work and collaborate across multi-disciplinary teams using agile methods. Advocacy and education: Advocate for and educate client teams about user-centred design including upskilling and mentoring. Best practice and community: Be part of and contribute to the Community of Practice to ensure it develops alongside developments in the industry. Skills and Experience: Deep analytical thinking with a strong ability to communicate insights clearly through presentations and reports. Skilled in designing accessible systems and services, with a good understanding of WCAG 2.2 guidelines and inclusive design for users with varying levels of digital literacy (desirable). Experienced in creating intuitive, user-friendly digital experiences backed by solid user research and usability testing, with the ability to extract and present actionable insights. Proficient in prototyping and design tools including Figma, Adobe XD, Axure, and Balsamiq. Familiar with research and analysis tools such as Dovetail, Mural, and Microsoft Forms. Knowledge of front-end technologies (HTML, CSS, JavaScript) and analytical tools like Google Analytics (both desirable). Comfortable working within Agile frameworks and collaborating across multidisciplinary teams. Experience working with Government Digital Service (GDS) standards and practices (desirable). A portfolio of UX work is available on request . Qualifications & Certifications: A degree or equivalent qualification related to the area you work in - Desirable. Due to the nature of this position, you must be willing and eligible to achieve a minimum of SC clearance. To be eligible, you must have been a resident in the UK for a minimum of 5 years and have the right to work in the UK. Triad's Commitment to You As a growing and ambitious company, Triad prioritises your development and well-being: Continuous Training & Development: Access to top-rated Udemy Business courses. Work Environment: Collaborative, creative, and free from discrimination. Benefits: 25 days of annual leave, plus bank holidays. Matched pension contributions (5%). Private healthcare with Bupa. Gym membership support or Lakeshore Fitness access. Perkbox membership. Cycle-to-work scheme. What Our Colleagues Have to Say Please see for yourself on Glass Door and our "Day in the Life" videos at the bottom of our Careers Page Our Selection Process After applying for the role, our in-house talent team will contact you to discuss Triad and the position. If shortlisted, you will be invited for: An interview with our Head of UX, including a career review and cultural fit assessment. A workshop and interview session with our principal consultants. We aim to complete interviews and progress candidates to offer stage within 2-3 weeks of the initial conversation. Other information If this role is of interest to you or you would like further information, please contact Ryan Jordan and submit your application now! Triad is an equal opportunities employer and welcomes applications from all suitably qualified people regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion, or belief. We are proud that our recruitment process has been recognised as inclusive and accessible to disabled people who meet the minimum criteria for any role. We are a signatory on the Tech Talent Charter that aims to bring industries and organisations together to drive greater inclusion and diversity in technology roles, in addition, as a Disability Confident Leader.
Head of CDM / Principal Designer Services required to join a development and construction consultancy. You will lead the delivery of Principal Designer services across a wide portfolio of construction and development projects. You will ensure that health and safety is effectively embedded in the design process, in full compliance with CDM 2015 regulations. This is a senior leadership role that also includes managing and developing a team of CDM professionals, enhancing service delivery and acting as the key advisor to internal and external stakeholders. Key Responsibilities Lead and manage the Principal Designer function across all projects, ensuring compliance with CDM 2015 and relevant legislation. Act as the key contact for CDM advice and guidance to project teams, clients, designers and contractors. Oversee the development and implementation of CDM strategies and risk management processes throughout project lifecycles. Manage the preparation and review of pre-construction information and Health and Safety Files. Chair design risk reviews and workshops, ensuring safety is considered at every stage of the design. Lead and mentor a growing team of CDM professionals, supporting their development and ensuring consistent high standards. Prepare and deliver sales presentations to support bids and fee proposals. Raise the company profile by preparing and delivering training for third-party stakeholders. Organise and participate in face-to-face networking with clients and suppliers. Drive continuous improvement in the delivery of CDM and Principal Designer services. Experience Significant experience acting as Principal Designer under CDM 2015 within consultancy or client-side roles. Deep understanding of health and safety legislation in the construction and development sectors. Excellent leadership and team management skills. Strong client-facing and stakeholder engagement experience. Qualifications Degree/Diploma qualification in a relevant subject i.e. Health and Safety, Construction Design preferred. Chartered or Incorporated status with a relevant professional body (e.g., IOSH, APS, RICS, CIOB) preferred via associated qualifications routes. The company are offering 75k- 85k plus pension, private health, life insurance and more.
Sep 02, 2025
Full time
Head of CDM / Principal Designer Services required to join a development and construction consultancy. You will lead the delivery of Principal Designer services across a wide portfolio of construction and development projects. You will ensure that health and safety is effectively embedded in the design process, in full compliance with CDM 2015 regulations. This is a senior leadership role that also includes managing and developing a team of CDM professionals, enhancing service delivery and acting as the key advisor to internal and external stakeholders. Key Responsibilities Lead and manage the Principal Designer function across all projects, ensuring compliance with CDM 2015 and relevant legislation. Act as the key contact for CDM advice and guidance to project teams, clients, designers and contractors. Oversee the development and implementation of CDM strategies and risk management processes throughout project lifecycles. Manage the preparation and review of pre-construction information and Health and Safety Files. Chair design risk reviews and workshops, ensuring safety is considered at every stage of the design. Lead and mentor a growing team of CDM professionals, supporting their development and ensuring consistent high standards. Prepare and deliver sales presentations to support bids and fee proposals. Raise the company profile by preparing and delivering training for third-party stakeholders. Organise and participate in face-to-face networking with clients and suppliers. Drive continuous improvement in the delivery of CDM and Principal Designer services. Experience Significant experience acting as Principal Designer under CDM 2015 within consultancy or client-side roles. Deep understanding of health and safety legislation in the construction and development sectors. Excellent leadership and team management skills. Strong client-facing and stakeholder engagement experience. Qualifications Degree/Diploma qualification in a relevant subject i.e. Health and Safety, Construction Design preferred. Chartered or Incorporated status with a relevant professional body (e.g., IOSH, APS, RICS, CIOB) preferred via associated qualifications routes. The company are offering 75k- 85k plus pension, private health, life insurance and more.
