Skilled Aircraft Fitter - Aerospace - Filton, On-site CONTRACT OPPORTUNITY AVAILABLE WITHIN A LEADING AEROSPACE COMPANY FOR A SKILLED AIRCRAFT FITTER £26.92/ph inside IR35 Initial 12-month initial contract with likely extensions Possibility of a permanent role during the contract Onsite in Filton 6:30-15:45 Monday to Thursday with overtime available ABOUT THE CLIENT: Our client is a leading global name in aerospace, responsible for designing, manufacturing, and testing wings for some of the world's most advanced aircraft. Their Filton site plays a vital role in the aerospace supply chain, supporting both commercial and military aviation sectors. Due to a growing pipeline of work, they are looking to recruit a number of Skilled Aircraft Fitters to support production operations for their A400M programme. WHAT WILL THE SKILLED AIRCRAFT FITTER BE DOING? As an Aircraft Fitter, you'll be based in the build production section supporting aircraft wing assembly. Your tasks will include working from engineering drawings, using power tools to drill, shim and seal, and ensuring all work meets the required standards. The role involves tank work, so working in confined spaces will be necessary. You will also be expected to obtain 1st party certification following relevant training. WE NEED THE SKILLED AIRCRAFT FITTER TO HAVE . A time served engineering apprenticeship City & Guilds Level 2, BTEC ONC or NVQ Level 2/3 in a relevant engineering discipline The willingness to work in confined spaces Experience using hand tools and working in a fitter/assembly operator role The ability to go through a BPSS check and pass a pre-employment medical TO BE CONSIDERED. Please either apply through this advert or email me directly via (see below) For further information, please call me. By applying for this role, you give express consent for us to process and submit (subject to required skills) your application to our client in conjunction with this vacancy only.
Sep 03, 2025
Contractor
Skilled Aircraft Fitter - Aerospace - Filton, On-site CONTRACT OPPORTUNITY AVAILABLE WITHIN A LEADING AEROSPACE COMPANY FOR A SKILLED AIRCRAFT FITTER £26.92/ph inside IR35 Initial 12-month initial contract with likely extensions Possibility of a permanent role during the contract Onsite in Filton 6:30-15:45 Monday to Thursday with overtime available ABOUT THE CLIENT: Our client is a leading global name in aerospace, responsible for designing, manufacturing, and testing wings for some of the world's most advanced aircraft. Their Filton site plays a vital role in the aerospace supply chain, supporting both commercial and military aviation sectors. Due to a growing pipeline of work, they are looking to recruit a number of Skilled Aircraft Fitters to support production operations for their A400M programme. WHAT WILL THE SKILLED AIRCRAFT FITTER BE DOING? As an Aircraft Fitter, you'll be based in the build production section supporting aircraft wing assembly. Your tasks will include working from engineering drawings, using power tools to drill, shim and seal, and ensuring all work meets the required standards. The role involves tank work, so working in confined spaces will be necessary. You will also be expected to obtain 1st party certification following relevant training. WE NEED THE SKILLED AIRCRAFT FITTER TO HAVE . A time served engineering apprenticeship City & Guilds Level 2, BTEC ONC or NVQ Level 2/3 in a relevant engineering discipline The willingness to work in confined spaces Experience using hand tools and working in a fitter/assembly operator role The ability to go through a BPSS check and pass a pre-employment medical TO BE CONSIDERED. Please either apply through this advert or email me directly via (see below) For further information, please call me. By applying for this role, you give express consent for us to process and submit (subject to required skills) your application to our client in conjunction with this vacancy only.
Assembly Fitter Location: Tamworth Salary: 27,000 starting, rising to 29,500 after training, with further progression available About the Role We are seeking a skilled and motivated Assembly Fitter to join a permanent, stable team with excellent long-term career prospects. This is an exciting opportunity to work on bespoke vehicle modification projects within a clean, organised, and supportive working environment. This role offers: A permanent position with strong job security Day shifts only with an early finish on Fridays Ongoing training and a structured career progression plan The opportunity to develop new skills and build a career for life Key Responsibilities of the Assembly Fitter Working on bespoke, high-quality vehicle builds Assembling components onto vehicles (e.g. lights, racking, grab rails, steps) Using a wide range of hand and power tools, including cutting knives and air tools Reading and interpreting engineering drawings Measuring, marking out, and working with precision tools such as tapes, micrometres, and verniers Candidate Profile The successful Assembly Fitter may come from a variety of skilled trade backgrounds, such as: Coachbuilding or motorhome building Commercial bodybuilding Welding, metalwork, or fabrication Joinery, cabinet making, or window fabrication Above all, you'll be confident with hand/power tools, able to measure accurately, and keen to learn and develop your skills further. Benefits Starting salary of 27,000 , with increases after probation and regular reviews (salary could rise to 29,500 within 6-12 months ) Paid overtime at 1.5x rate Permanent, secure role with no shift work - daytime hours only Clean, modern working environment Ongoing training and skill development with clear progression opportunities For more information about the Assembly Fitter role, please contact Sophie Ranson at E3 Recruitment.
Sep 03, 2025
Full time
Assembly Fitter Location: Tamworth Salary: 27,000 starting, rising to 29,500 after training, with further progression available About the Role We are seeking a skilled and motivated Assembly Fitter to join a permanent, stable team with excellent long-term career prospects. This is an exciting opportunity to work on bespoke vehicle modification projects within a clean, organised, and supportive working environment. This role offers: A permanent position with strong job security Day shifts only with an early finish on Fridays Ongoing training and a structured career progression plan The opportunity to develop new skills and build a career for life Key Responsibilities of the Assembly Fitter Working on bespoke, high-quality vehicle builds Assembling components onto vehicles (e.g. lights, racking, grab rails, steps) Using a wide range of hand and power tools, including cutting knives and air tools Reading and interpreting engineering drawings Measuring, marking out, and working with precision tools such as tapes, micrometres, and verniers Candidate Profile The successful Assembly Fitter may come from a variety of skilled trade backgrounds, such as: Coachbuilding or motorhome building Commercial bodybuilding Welding, metalwork, or fabrication Joinery, cabinet making, or window fabrication Above all, you'll be confident with hand/power tools, able to measure accurately, and keen to learn and develop your skills further. Benefits Starting salary of 27,000 , with increases after probation and regular reviews (salary could rise to 29,500 within 6-12 months ) Paid overtime at 1.5x rate Permanent, secure role with no shift work - daytime hours only Clean, modern working environment Ongoing training and skill development with clear progression opportunities For more information about the Assembly Fitter role, please contact Sophie Ranson at E3 Recruitment.
Duties: The Facility & Technology Development team are responsible for the design and delivery of facility components, test rigs and the infrastructure required in support of the core areas delivering physical test plans.? The area is also responsible for the development and delivery of key new facilities, technology, infrastructure and strategy for the wider business, project leading from concept through to delivery. The role will see the associate lead the design and delivery of bespoke test rigs and fixtures in support of the core cycle plan across all the Engineering Labs test areas. These rigs will vary from component to system level or full vehicle testing. Key Accountabilities and Responsibilities: Designing test rigs and components using the 3DX toolset (Catia V6) from concept to delivery Creating 2D drawings for manufacture of parts at internal workshops and external suppliers Liaising with customers to identify testing requirements, and ensuring test rigs are capable of the task Liaising with workshop fitters and supervisors Managing and planning workload to ensure on time delivery of test rigs Validating junior team members designs and technical drawings Validation of designs using appropriate methods e.g., Hand Calculations, kinematics, MBS (Multibody Simulations), FEA/CAE Creating technical reports Skills: Knowledge of testing methodologies relating to the testing of road vehicles. Knowledge of vehicle architecture, components and mechanical systems. Experienced CAD user for 3D modelling. Ability to produce and interpret 2D complex detailed drawings in order to prepare parts for manufacture and assembly. Understanding of various manufacturing techniques and how to optimise designs accordingly. Ability to manage workload, priorities, identify issues and solutions using own initiative. Ability to resolve technical and process issues promptly.
Sep 02, 2025
Contractor
Duties: The Facility & Technology Development team are responsible for the design and delivery of facility components, test rigs and the infrastructure required in support of the core areas delivering physical test plans.? The area is also responsible for the development and delivery of key new facilities, technology, infrastructure and strategy for the wider business, project leading from concept through to delivery. The role will see the associate lead the design and delivery of bespoke test rigs and fixtures in support of the core cycle plan across all the Engineering Labs test areas. These rigs will vary from component to system level or full vehicle testing. Key Accountabilities and Responsibilities: Designing test rigs and components using the 3DX toolset (Catia V6) from concept to delivery Creating 2D drawings for manufacture of parts at internal workshops and external suppliers Liaising with customers to identify testing requirements, and ensuring test rigs are capable of the task Liaising with workshop fitters and supervisors Managing and planning workload to ensure on time delivery of test rigs Validating junior team members designs and technical drawings Validation of designs using appropriate methods e.g., Hand Calculations, kinematics, MBS (Multibody Simulations), FEA/CAE Creating technical reports Skills: Knowledge of testing methodologies relating to the testing of road vehicles. Knowledge of vehicle architecture, components and mechanical systems. Experienced CAD user for 3D modelling. Ability to produce and interpret 2D complex detailed drawings in order to prepare parts for manufacture and assembly. Understanding of various manufacturing techniques and how to optimise designs accordingly. Ability to manage workload, priorities, identify issues and solutions using own initiative. Ability to resolve technical and process issues promptly.
Morson Talent are recruiting for Skilled Aircraft Fitters to work for our prestigious client in Filton Bristol. Candidate needs to have experience of using hand tools and previous work experience in a fitter/assembly operator role Candidates must be comfortable working at heights and within confined spaces Candidates must pass pre-employment medical before going on site as well as BPSS clearance Candidates assembling A400M Must have completed an apprenticeship within an engineering discipline i.e: sheet metal worker, aircraft or maintenance technician, tool maker, fitter/turner Must hold NVQ L2 + L3 or equivalent in engineering. Start from mid-October 12 months rolling contract with possibility of permanent role. 35 hours a week Monday-Thursday 6:30am-3:45pm PAY RATE: £26.92 per hour Umbrella £20.13 per hour PAYE Overtime: 25% uplift Mon-Fri and 50% Sat-Sun Skilled Apprenticeship in engineering discipline NVQ L.2 + 3 in engineering discipline Completed a work based or time served apprenticeship
Sep 02, 2025
Contractor
Morson Talent are recruiting for Skilled Aircraft Fitters to work for our prestigious client in Filton Bristol. Candidate needs to have experience of using hand tools and previous work experience in a fitter/assembly operator role Candidates must be comfortable working at heights and within confined spaces Candidates must pass pre-employment medical before going on site as well as BPSS clearance Candidates assembling A400M Must have completed an apprenticeship within an engineering discipline i.e: sheet metal worker, aircraft or maintenance technician, tool maker, fitter/turner Must hold NVQ L2 + L3 or equivalent in engineering. Start from mid-October 12 months rolling contract with possibility of permanent role. 35 hours a week Monday-Thursday 6:30am-3:45pm PAY RATE: £26.92 per hour Umbrella £20.13 per hour PAYE Overtime: 25% uplift Mon-Fri and 50% Sat-Sun Skilled Apprenticeship in engineering discipline NVQ L.2 + 3 in engineering discipline Completed a work based or time served apprenticeship
We're hiring an experienced Assembly Fitter! If you're meticulous, enjoy working with accuracy, and excel in a quick-moving setting focused on top-notch quality and efficiency, this could be a great fit for you. As an Assembly Fitter on our energetic team, you'll be key to our production, making sure our products are made to the highest quality. Job title: Assembly Fitter Location: Peterlee, SR8 2HX Job type: Fixed term contract Hours: 36.5 hours per week Skills Required: Previous mechanical / assembly fitting experience is essential. Ability to read and interpret working instructions. Good hand-eye coordination and attention to detail. Ability to work in a fast-paced environment. Strong teamwork and communication skills. Willingness to learn and follow company procedures. Pay Rates: 16.62 - 18.80 per hour day shift 19.94 - 22.56 per hour afternoon shift 22.44 - 25.38 per hour night shift (Currently not required) Monthly attendance bonus and monthly truck bonuses. Frequent overtime opportunities. Day-shift: Monday-Thursday: 08:00-16:00 Friday: 08:00-12:30 Back-shift: Monday-Thursday: 16:00-00:00 Friday: 12:30-17:00 Night shift (Not required) Monday-Thursday: 00:00 - 08:00 Friday: 17:00 - 21:30 Job Summary: We are seeking a skilled assembly fitter to join our team. The successful candidate will be responsible for assembling products, according to specification, ensuring quality standards are met and maintain a clean and safe work environment Key Responsibilities: Assemble components and products following work instructions. Operate Air / Battery tools and torque wrenches required for the assembly tasks. Conduct quality inspections to ensure products meet company standards. Follow safety procedures and maintain good housekeeping. Report issues and defects to the line leader. Meet production targets daily. Benefits: Access to the Randstad Flexible Benefits App which includes discounts at major supermarkets, restaurants, coffee shops and cinemas Access to employee assistance programmes including financial advice and counselling services Access to the on-site Gym Bank Holidays and Holidays including a summer shut down period and Christmas shut down period Training and career development opportunities Weekly Pay Free Car Parking on Site Canteen If you are motivated individual looking for an opportunity in assembly and manufacturing, we encourage you to apply. How to Apply: Click apply and attached an updated CV and one of our team will be in contact to discuss further. Due to the high volume of applications we will not be able to contact every applicant. If you have not heard back within 14 days of your application then unfortunately on this occasion you were not shortlisted for the position.
Sep 02, 2025
Seasonal
We're hiring an experienced Assembly Fitter! If you're meticulous, enjoy working with accuracy, and excel in a quick-moving setting focused on top-notch quality and efficiency, this could be a great fit for you. As an Assembly Fitter on our energetic team, you'll be key to our production, making sure our products are made to the highest quality. Job title: Assembly Fitter Location: Peterlee, SR8 2HX Job type: Fixed term contract Hours: 36.5 hours per week Skills Required: Previous mechanical / assembly fitting experience is essential. Ability to read and interpret working instructions. Good hand-eye coordination and attention to detail. Ability to work in a fast-paced environment. Strong teamwork and communication skills. Willingness to learn and follow company procedures. Pay Rates: 16.62 - 18.80 per hour day shift 19.94 - 22.56 per hour afternoon shift 22.44 - 25.38 per hour night shift (Currently not required) Monthly attendance bonus and monthly truck bonuses. Frequent overtime opportunities. Day-shift: Monday-Thursday: 08:00-16:00 Friday: 08:00-12:30 Back-shift: Monday-Thursday: 16:00-00:00 Friday: 12:30-17:00 Night shift (Not required) Monday-Thursday: 00:00 - 08:00 Friday: 17:00 - 21:30 Job Summary: We are seeking a skilled assembly fitter to join our team. The successful candidate will be responsible for assembling products, according to specification, ensuring quality standards are met and maintain a clean and safe work environment Key Responsibilities: Assemble components and products following work instructions. Operate Air / Battery tools and torque wrenches required for the assembly tasks. Conduct quality inspections to ensure products meet company standards. Follow safety procedures and maintain good housekeeping. Report issues and defects to the line leader. Meet production targets daily. Benefits: Access to the Randstad Flexible Benefits App which includes discounts at major supermarkets, restaurants, coffee shops and cinemas Access to employee assistance programmes including financial advice and counselling services Access to the on-site Gym Bank Holidays and Holidays including a summer shut down period and Christmas shut down period Training and career development opportunities Weekly Pay Free Car Parking on Site Canteen If you are motivated individual looking for an opportunity in assembly and manufacturing, we encourage you to apply. How to Apply: Click apply and attached an updated CV and one of our team will be in contact to discuss further. Due to the high volume of applications we will not be able to contact every applicant. If you have not heard back within 14 days of your application then unfortunately on this occasion you were not shortlisted for the position.
Toolmaker Jig Technician Job Title: Toolmaker / Jig Technician Location: Broughton, UK Job Type: Permanent Overview We are seeking an experienced Toolmaker / Jig Technician to join a leading aerospace manufacturing team in Broughton. This role involves supporting production within a wing box assembly plant by maintaining and certifying tooling and jigs to ensure efficient, accurate, and safe production output. Key Responsibilities Perform reactive maintenance on tooling to ensure production continuity. Carry out proactive maintenance on critical path tooling and jig features following predefined schedules. Work closely with the Metrology team , using Laser Trackers and CMM instruments to check and certify various types of tooling across the plant. Support measurement activities for aircraft concession data and acceptance checks. Requirements Completed apprenticeship in toolmaking, fitter machining, or machining , qualified to NVQ Level 3 or above. Minimum 3 years of post-apprenticeship experience . Skilled in operating tool room machinery, including lathes, milling machines, grinding machines, and jig borers . Familiarity with Laser Tracker and CMM instruments is an advantage. Strong collaborative skills with the ability to follow technical documentation precisely. Working Hours Monday to Thursday: 20:45 - 06:00 35 hours per week Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Sep 02, 2025
Full time
Toolmaker Jig Technician Job Title: Toolmaker / Jig Technician Location: Broughton, UK Job Type: Permanent Overview We are seeking an experienced Toolmaker / Jig Technician to join a leading aerospace manufacturing team in Broughton. This role involves supporting production within a wing box assembly plant by maintaining and certifying tooling and jigs to ensure efficient, accurate, and safe production output. Key Responsibilities Perform reactive maintenance on tooling to ensure production continuity. Carry out proactive maintenance on critical path tooling and jig features following predefined schedules. Work closely with the Metrology team , using Laser Trackers and CMM instruments to check and certify various types of tooling across the plant. Support measurement activities for aircraft concession data and acceptance checks. Requirements Completed apprenticeship in toolmaking, fitter machining, or machining , qualified to NVQ Level 3 or above. Minimum 3 years of post-apprenticeship experience . Skilled in operating tool room machinery, including lathes, milling machines, grinding machines, and jig borers . Familiarity with Laser Tracker and CMM instruments is an advantage. Strong collaborative skills with the ability to follow technical documentation precisely. Working Hours Monday to Thursday: 20:45 - 06:00 35 hours per week Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry. Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects. Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organisation. Primary Duties Perform precise assembly and testing tasks. Conduct integrity assessments of assembled systems using high-pressure gases and specialised leak detection equipment, such as helium mass spectrometers. Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques. Utilize digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment. Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces. Perform periodic maintenance of cleanroom facilities and testing equipment.
Sep 02, 2025
Full time
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry. Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects. Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organisation. Primary Duties Perform precise assembly and testing tasks. Conduct integrity assessments of assembled systems using high-pressure gases and specialised leak detection equipment, such as helium mass spectrometers. Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques. Utilize digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment. Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces. Perform periodic maintenance of cleanroom facilities and testing equipment.
Job Title: Mechanical Fitter Mechanical Fitter Hours: Monday to Thursday from 07:30 - 16:30 and Friday 07:30- 14:00 Salary - £14.42 per hour. Location: Stroud About the Role You ll be responsible for building and fitting mechanical and electrical assemblies from start to finish, working from engineering drawings and instructions. This is a varied and practical role that requires strong problem-solving skills and the ability to work both independently and as part of a team. Key Responsibilities Assemble mechanical, electrical, pneumatic, hydraulic, and electronic components Work on sub-assemblies and full product builds from scratch Use hand and power tools for tasks such as cutting, folding, marking out, pipe bending and general fabrication Carry out quality checks to ensure assemblies meet alignment, dimensions, and quality standards Follow Health & Safety procedures at all times, taking responsibility for your own safety and others Carry out other reasonable duties as required by the company What We re Looking For A solid engineering background Able to read and work from manufacturing and assembly drawings Good attention to detail and a strong team player Confident using a range of hand and power tools Problem-solver with the ability to work on your own initiative Some experience or knowledge of pneumatics, hydraulics, and electrical systems Previous experience in vehicle fitting/fabrication is a bonus Background in Aviation, Military, Marine or similar sectors is an advantage Ability to read basic electrical schematics is preferred (but not essential) What We Offer Time and a half pay for overtime (with plenty available) Monthly tools bonus for good attendance Performance bonuses based on team KPIs 23 days annual leave plus bank holidays (rising to 25 days with long service) Death in service benefit Supportive working environment with a skilled team Varied and engaging work across different assemblies If you are interested in this Welder role, please get in contact with Chloe Smith at Orion Electrotech. Thank you for your application. Due to the volume of applications, we receive, unfortunately we are not able to respond to every application personally, therefore, if you have not heard back from us within 5 working days, please assume your application has been unsuccessful. To see our other available vacancies please visit our website. INDMAN
Sep 02, 2025
Full time
Job Title: Mechanical Fitter Mechanical Fitter Hours: Monday to Thursday from 07:30 - 16:30 and Friday 07:30- 14:00 Salary - £14.42 per hour. Location: Stroud About the Role You ll be responsible for building and fitting mechanical and electrical assemblies from start to finish, working from engineering drawings and instructions. This is a varied and practical role that requires strong problem-solving skills and the ability to work both independently and as part of a team. Key Responsibilities Assemble mechanical, electrical, pneumatic, hydraulic, and electronic components Work on sub-assemblies and full product builds from scratch Use hand and power tools for tasks such as cutting, folding, marking out, pipe bending and general fabrication Carry out quality checks to ensure assemblies meet alignment, dimensions, and quality standards Follow Health & Safety procedures at all times, taking responsibility for your own safety and others Carry out other reasonable duties as required by the company What We re Looking For A solid engineering background Able to read and work from manufacturing and assembly drawings Good attention to detail and a strong team player Confident using a range of hand and power tools Problem-solver with the ability to work on your own initiative Some experience or knowledge of pneumatics, hydraulics, and electrical systems Previous experience in vehicle fitting/fabrication is a bonus Background in Aviation, Military, Marine or similar sectors is an advantage Ability to read basic electrical schematics is preferred (but not essential) What We Offer Time and a half pay for overtime (with plenty available) Monthly tools bonus for good attendance Performance bonuses based on team KPIs 23 days annual leave plus bank holidays (rising to 25 days with long service) Death in service benefit Supportive working environment with a skilled team Varied and engaging work across different assemblies If you are interested in this Welder role, please get in contact with Chloe Smith at Orion Electrotech. Thank you for your application. Due to the volume of applications, we receive, unfortunately we are not able to respond to every application personally, therefore, if you have not heard back from us within 5 working days, please assume your application has been unsuccessful. To see our other available vacancies please visit our website. INDMAN
Bennett and Game Recruitment LTD
Stroud, Gloucestershire
My client is a leading designer and manufacturer of refuelling solutions and systems for a range of industries including Marine, Aviation and Defence. They are now looking to hire a number of Mechanical Fitters to join their established team in Stroud. The ideal candidate will come from an Assembly and Production, will be highly proficient with Hand and Power Tools and will have experience of Hydraulic and Pneumatic systems. Mechanical Fitter Job Overview Completing Engineering duties for sub-assembly production, fitting and final assembly Assembling Mechanical, Pneumatic, Hydraulic and Electronic components Assisting with the build of fabricated assemblies Using a variety of hand and power tools in assembly and quality assurance Marking out, cutting, folding, pipe bending and weld joint preparation as well as completing Hydraulic and Pneumatic runs. Mechanical Fitter Job Requirements Previous experience in a Fitting / Assembly position Able to work from Engineering drawings / schematics Circuitry knowledge of Hydraulics, Pneumatics and Electrics Defence or Aviation background would be beneficial Knowledge of basic electrical assembly and the ability to read circuit drawings would be advantageous Based within a commutable distance of Stroud Mechanical Fitter Salary & Benefits Hourly rate: 14.42 per hour Monday to Thursday 07:30 - 16:30, Friday 07:30 - 14:00 (40 hours) 31 days holiday inclusive of bank holidays 2 Company bonus schemes Pension Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Sep 02, 2025
Full time
My client is a leading designer and manufacturer of refuelling solutions and systems for a range of industries including Marine, Aviation and Defence. They are now looking to hire a number of Mechanical Fitters to join their established team in Stroud. The ideal candidate will come from an Assembly and Production, will be highly proficient with Hand and Power Tools and will have experience of Hydraulic and Pneumatic systems. Mechanical Fitter Job Overview Completing Engineering duties for sub-assembly production, fitting and final assembly Assembling Mechanical, Pneumatic, Hydraulic and Electronic components Assisting with the build of fabricated assemblies Using a variety of hand and power tools in assembly and quality assurance Marking out, cutting, folding, pipe bending and weld joint preparation as well as completing Hydraulic and Pneumatic runs. Mechanical Fitter Job Requirements Previous experience in a Fitting / Assembly position Able to work from Engineering drawings / schematics Circuitry knowledge of Hydraulics, Pneumatics and Electrics Defence or Aviation background would be beneficial Knowledge of basic electrical assembly and the ability to read circuit drawings would be advantageous Based within a commutable distance of Stroud Mechanical Fitter Salary & Benefits Hourly rate: 14.42 per hour Monday to Thursday 07:30 - 16:30, Friday 07:30 - 14:00 (40 hours) 31 days holiday inclusive of bank holidays 2 Company bonus schemes Pension Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Skilled Aircraft Structural Fitter Location: Hamble, Southampton Rate: 35.66/hour - Umbrella - Inside of IR35 Clearance Required: BPSS (Baseline) About the Role: We're looking for experienced Aircraft Structural Fitters to join our Military production team in a highly skilled operator role. You'll be working on the strip, repair, and assembly of aircraft structures, sub-assemblies, and components. This is a hands-on, production-focused role requiring solid experience in heavy structural build, ideally gained in aerospace environments like Bombardier, Leonardo, BAE, or similar. This position is ideal for individuals who thrive in high-output teams, have experience working on jigs, and can deliver with minimal supervision in a complex, precision-critical environment. Working Hours: Early shift: Typically 7:00am-5:00pm, with flexibility for 6:00am-4:00pm Approx. 50 hours/week Scope for overtime, including Fridays and weekends (subject to supervisor availability), provided 11-hour rest periods are maintained Key Responsibilities: Drilling, riveting, and assembling aircraft structures to exacting tolerances Applying solid riveting, percussion riveting, and skin repairs on metallic components Working with a variety of materials and fastener types, using hand and power tools Interpreting engineering drawings, technical documents, and manufacturing procedures Maintaining your own Approved Operator (AO) stamp(s) and signing off on completed work Supporting team goals and mentoring less experienced operators when required Adhering to high standards in EHS, quality, cost-efficiency, and housekeeping What We're Looking For: Essential Skills & Experience: Recent experience in aircraft production environments (not maintenance) Solid background in drilling, riveting, and working on structural jigs Able to work from detailed technical drawings and work route cards Strong attention to detail and quality-focused mindset NVQ Level 3 in Engineering/Manufacturing or time-served apprenticeship Physically capable of manual tasks in a fast-paced shop floor environment Desirable: Familiar with 5S, lean principles, and precision assembly standards Experience with composite and metallic structures Own a comprehensive set of tools - this is a strong indicator of experience. While site tools are available, candidates with only basic toolkits may not meet the role expectations. Candidates must be eligible to live and work in the UK freely, obtain baseline clearance and adhere to ITAR restrictions.
Sep 02, 2025
Contractor
Skilled Aircraft Structural Fitter Location: Hamble, Southampton Rate: 35.66/hour - Umbrella - Inside of IR35 Clearance Required: BPSS (Baseline) About the Role: We're looking for experienced Aircraft Structural Fitters to join our Military production team in a highly skilled operator role. You'll be working on the strip, repair, and assembly of aircraft structures, sub-assemblies, and components. This is a hands-on, production-focused role requiring solid experience in heavy structural build, ideally gained in aerospace environments like Bombardier, Leonardo, BAE, or similar. This position is ideal for individuals who thrive in high-output teams, have experience working on jigs, and can deliver with minimal supervision in a complex, precision-critical environment. Working Hours: Early shift: Typically 7:00am-5:00pm, with flexibility for 6:00am-4:00pm Approx. 50 hours/week Scope for overtime, including Fridays and weekends (subject to supervisor availability), provided 11-hour rest periods are maintained Key Responsibilities: Drilling, riveting, and assembling aircraft structures to exacting tolerances Applying solid riveting, percussion riveting, and skin repairs on metallic components Working with a variety of materials and fastener types, using hand and power tools Interpreting engineering drawings, technical documents, and manufacturing procedures Maintaining your own Approved Operator (AO) stamp(s) and signing off on completed work Supporting team goals and mentoring less experienced operators when required Adhering to high standards in EHS, quality, cost-efficiency, and housekeeping What We're Looking For: Essential Skills & Experience: Recent experience in aircraft production environments (not maintenance) Solid background in drilling, riveting, and working on structural jigs Able to work from detailed technical drawings and work route cards Strong attention to detail and quality-focused mindset NVQ Level 3 in Engineering/Manufacturing or time-served apprenticeship Physically capable of manual tasks in a fast-paced shop floor environment Desirable: Familiar with 5S, lean principles, and precision assembly standards Experience with composite and metallic structures Own a comprehensive set of tools - this is a strong indicator of experience. While site tools are available, candidates with only basic toolkits may not meet the role expectations. Candidates must be eligible to live and work in the UK freely, obtain baseline clearance and adhere to ITAR restrictions.
Our client is a successful and well-established manufacturer. They are looking for an experienced Auto Electrician to work on the electrical aspects of vehicle manufacture / conversion. They are looking for people that are used to working with hand and power tools, and that can follow diagrams, schematics and instructions with precision. PLEASE ONLY APPLY IF YOU ARE AN EXPERIENCED / SENIOR AUTO ELECTRICIAN Responsibilities: Research electrical faults. Repair and replace electrical items. Understand and be able to fit; Tail Lifts, Towbars, Beacons, and any extra lights inside and out on panel vans or chassis. Installation and fitting of electrical systems, including; alarms, immobilisers, tracking, parking sensors, split charge systems, welfare heating, water, and power systems. General upkeep of the workshop and premises to aid with the smooth running of the workshop and conversion of vehicles. Installations should be to a high standard. This role covers all duties in the workshop electrical department, and can involve mentoring. Requirements: Good working knowledge of vehicle Electrics and a proven background as an Auto Electrician is essential. Have the basic tooling and be able to use hand and power tools. Work methodically and pay close attention to detail. Ability to read electrical diagrams. Flexible as work can be varied. Have own tools and also be able to look after and care for any company tooling and equipment used. Be competent at working alone or as part of a team. Salary: £30,000 - £33,000 depending on experience. Hours of work: 4 day week! Monday to Thursday, 6:30am to 5:00pm, 40 hour week. Benefits: Free parking Gym membership Health & wellbeing programme On-site parking This job would suit someone with a background in Automotive Electrics, e.g. Automotive Electrician / Electrical Assembler / Coach Builder / Automotive Electrician / Vehicle Conversion Operative / Electrical Engineer / Electrical Technician / Electrical Assembly Operative / Electrical Fitter / Electrical Engineer / etc.
Sep 02, 2025
Full time
Our client is a successful and well-established manufacturer. They are looking for an experienced Auto Electrician to work on the electrical aspects of vehicle manufacture / conversion. They are looking for people that are used to working with hand and power tools, and that can follow diagrams, schematics and instructions with precision. PLEASE ONLY APPLY IF YOU ARE AN EXPERIENCED / SENIOR AUTO ELECTRICIAN Responsibilities: Research electrical faults. Repair and replace electrical items. Understand and be able to fit; Tail Lifts, Towbars, Beacons, and any extra lights inside and out on panel vans or chassis. Installation and fitting of electrical systems, including; alarms, immobilisers, tracking, parking sensors, split charge systems, welfare heating, water, and power systems. General upkeep of the workshop and premises to aid with the smooth running of the workshop and conversion of vehicles. Installations should be to a high standard. This role covers all duties in the workshop electrical department, and can involve mentoring. Requirements: Good working knowledge of vehicle Electrics and a proven background as an Auto Electrician is essential. Have the basic tooling and be able to use hand and power tools. Work methodically and pay close attention to detail. Ability to read electrical diagrams. Flexible as work can be varied. Have own tools and also be able to look after and care for any company tooling and equipment used. Be competent at working alone or as part of a team. Salary: £30,000 - £33,000 depending on experience. Hours of work: 4 day week! Monday to Thursday, 6:30am to 5:00pm, 40 hour week. Benefits: Free parking Gym membership Health & wellbeing programme On-site parking This job would suit someone with a background in Automotive Electrics, e.g. Automotive Electrician / Electrical Assembler / Coach Builder / Automotive Electrician / Vehicle Conversion Operative / Electrical Engineer / Electrical Technician / Electrical Assembly Operative / Electrical Fitter / Electrical Engineer / etc.
Ernest Gordon Recruitment Limited
Magherafelt, County Londonderry
Metal Fabricator (Aluminium) 35,000 - 40,000 + Days Based + Weekdays Only + Benefits Magherafelt, County Londonderry Are you a Metal Fabricator with the ability to interpret CAD Drawings looking for a stable, days-based role that can offer great work-life balance and stable work? On offer is a company who have been designing bespoke and luxurious glass solutions for companies like Audi, Ferrari and other leading brands in the commercial and domestic industries for over 20 years. In this role you will be working off CAD drawings to manufacture and fabricate aluminium parts. You will be operating Band Saws, Routers, Drills and Punches create parts before preparing them for assembly via powder coating, anodizing and hand finishing. No welding knowledge is required for this position. The role would suit a Metal Fabricator with the ability to interpret CAD drawings looking for a stable, days based role offering consistent work and no need to weld. The Role: Working with Static Machinery and Hand Tools to create Aluminium parts Interpreting CAD drawings Finishing parts via Powder Coating, Anodizing and Hand finishing Monday - Friday, 8am - 5pm with two, 30 minute paid breaks The Person: Metal Fabricator Looking for permanent work Job Reference: BBBH 21416 Fabricator, Fabrication, Fitting, Mechanical, Assembly, Manufacturing, Metal, Aluminium, Aluminum, Assembler, Fitter, Londonderry, County, Magherafelt, Castledawson If you're ready to join a respected, environmentally driven business where you'll make a real impact and grow your engineering career, click 'apply now' to submit your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline - the final offer will reflect your experience, qualifications, and skill set. Ernest Gordon Recruitment Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. By applying for this role, you accept our T&Cs, Privacy Policy, and Disclaimers, which can be found on our website.
Sep 01, 2025
Full time
Metal Fabricator (Aluminium) 35,000 - 40,000 + Days Based + Weekdays Only + Benefits Magherafelt, County Londonderry Are you a Metal Fabricator with the ability to interpret CAD Drawings looking for a stable, days-based role that can offer great work-life balance and stable work? On offer is a company who have been designing bespoke and luxurious glass solutions for companies like Audi, Ferrari and other leading brands in the commercial and domestic industries for over 20 years. In this role you will be working off CAD drawings to manufacture and fabricate aluminium parts. You will be operating Band Saws, Routers, Drills and Punches create parts before preparing them for assembly via powder coating, anodizing and hand finishing. No welding knowledge is required for this position. The role would suit a Metal Fabricator with the ability to interpret CAD drawings looking for a stable, days based role offering consistent work and no need to weld. The Role: Working with Static Machinery and Hand Tools to create Aluminium parts Interpreting CAD drawings Finishing parts via Powder Coating, Anodizing and Hand finishing Monday - Friday, 8am - 5pm with two, 30 minute paid breaks The Person: Metal Fabricator Looking for permanent work Job Reference: BBBH 21416 Fabricator, Fabrication, Fitting, Mechanical, Assembly, Manufacturing, Metal, Aluminium, Aluminum, Assembler, Fitter, Londonderry, County, Magherafelt, Castledawson If you're ready to join a respected, environmentally driven business where you'll make a real impact and grow your engineering career, click 'apply now' to submit your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline - the final offer will reflect your experience, qualifications, and skill set. Ernest Gordon Recruitment Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. By applying for this role, you accept our T&Cs, Privacy Policy, and Disclaimers, which can be found on our website.
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry. Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects. Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organisation. Primary Duties Perform precise assembly and testing tasks. Conduct integrity assessments of assembled systems using high-pressure gases and specialised leak detection equipment, such as helium mass spectrometers. Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques. Utilize digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment. Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces. Perform periodic maintenance of cleanroom facilities and testing equipment.
Sep 01, 2025
Full time
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry. Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects. Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organisation. Primary Duties Perform precise assembly and testing tasks. Conduct integrity assessments of assembled systems using high-pressure gases and specialised leak detection equipment, such as helium mass spectrometers. Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques. Utilize digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment. Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces. Perform periodic maintenance of cleanroom facilities and testing equipment.
We have an exciting opportunity for a Semi-Skilled Mechanical Fitter based in Bedford to join one of our clients on a full-time permanent basis. Summary of the Semi-Skilled Mechanical Fitter Salary: £30,000 - £35,000 per annum Location: Bedford Type of Contract: Permanent Hours: Monday Thursday 8:15am - 4:45pm, Fridays 8:15am - 1:45pm Our client is a global engineering company that has seen continuous growth for several decades. Responsibilities of the Semi-Skilled Mechanical Fitter Organising and output of the hydrostatic testing and fettling area. Pressure testing of various pump components. Hydrostatic pressure testing. Fettling of small and large pump components as well as impellers. Use of overhead cranes and forklifts. Sub-assembly of components, settling or painting process. Requirements for a successful Semi-Skilled Mechanical Fitter Experience working in a similar mechanical assembly environment. Experience working a light-medium mechanical engineering operation. Pressure testing experience or similar. Experience in reading of engineering drawings, manufacturing and quality checklists. Forklift and overhead crane certifications. Good communication skills. Allstaff Recruitment are an Independent Recruitment Specialist based in Bedfordshire who work on behalf of companies across Bedford, Milton Keynes and surrounds to fill their vacancies and meet their recruitment needs. We place candidates in permanent, temporary and contract roles across a number of industry sectors. Check out our website and our jobs page for our latest vacancies in your area. To keep up to date with all our recruitment activities and vacancies, please follow us on Facebook, LinkedIn and Twitter. Thank you for your interest in the Semi-Skilled Mechanical Fitter role. One of our qualified Recruitment Specialists will now review your application. Due to the high volume of applications, we receive it is with regret that we are unable to respond to all candidates directly. However, if you do not hear from us within seven days you have unfortunately been unsuccessful on this occasion.
Sep 01, 2025
Full time
We have an exciting opportunity for a Semi-Skilled Mechanical Fitter based in Bedford to join one of our clients on a full-time permanent basis. Summary of the Semi-Skilled Mechanical Fitter Salary: £30,000 - £35,000 per annum Location: Bedford Type of Contract: Permanent Hours: Monday Thursday 8:15am - 4:45pm, Fridays 8:15am - 1:45pm Our client is a global engineering company that has seen continuous growth for several decades. Responsibilities of the Semi-Skilled Mechanical Fitter Organising and output of the hydrostatic testing and fettling area. Pressure testing of various pump components. Hydrostatic pressure testing. Fettling of small and large pump components as well as impellers. Use of overhead cranes and forklifts. Sub-assembly of components, settling or painting process. Requirements for a successful Semi-Skilled Mechanical Fitter Experience working in a similar mechanical assembly environment. Experience working a light-medium mechanical engineering operation. Pressure testing experience or similar. Experience in reading of engineering drawings, manufacturing and quality checklists. Forklift and overhead crane certifications. Good communication skills. Allstaff Recruitment are an Independent Recruitment Specialist based in Bedfordshire who work on behalf of companies across Bedford, Milton Keynes and surrounds to fill their vacancies and meet their recruitment needs. We place candidates in permanent, temporary and contract roles across a number of industry sectors. Check out our website and our jobs page for our latest vacancies in your area. To keep up to date with all our recruitment activities and vacancies, please follow us on Facebook, LinkedIn and Twitter. Thank you for your interest in the Semi-Skilled Mechanical Fitter role. One of our qualified Recruitment Specialists will now review your application. Due to the high volume of applications, we receive it is with regret that we are unable to respond to all candidates directly. However, if you do not hear from us within seven days you have unfortunately been unsuccessful on this occasion.
Job Title: Mechanical Fitter ( Voith Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: DOE Hours :7am till 5pm Monday to Thursday and 7am till 1pm on a Friday please note hours will be reducing to 40 hours from 1st September to (Mon-Thurs 7am - 4pm and Fri 7am - 1pm) Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters with Gearbox and transmission experience The role of the Mechanical Fitter is to build transmission and sub-assembly to a high standard. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters who specialise in transmission and gear boxes. Responsibilities Understanding of vehicle mechanical interfaces and repairs of vehicle components Able to install and repair Fault find and diagnostic investigation work Mechanical knowledge Repairing or replacing parts, old and new. Understand and follow drawings Work to company safety Subject to a Drugs & Alcohol test Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Sep 01, 2025
Contractor
Job Title: Mechanical Fitter ( Voith Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: DOE Hours :7am till 5pm Monday to Thursday and 7am till 1pm on a Friday please note hours will be reducing to 40 hours from 1st September to (Mon-Thurs 7am - 4pm and Fri 7am - 1pm) Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters with Gearbox and transmission experience The role of the Mechanical Fitter is to build transmission and sub-assembly to a high standard. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters who specialise in transmission and gear boxes. Responsibilities Understanding of vehicle mechanical interfaces and repairs of vehicle components Able to install and repair Fault find and diagnostic investigation work Mechanical knowledge Repairing or replacing parts, old and new. Understand and follow drawings Work to company safety Subject to a Drugs & Alcohol test Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Are you ready to take your engineering expertise to the next level? This Mechanical Fitter role offers an exceptional opportunity to be part of a dynamic production team, working on innovative projects that demand precision, creativity, and a keen eye for detail. With a focus on quality craftsmanship and teamwork, this position is perfect for someone who thrives in a hands-on environment and is eager to contribute to the creation of world-class products. If you're passionate about engineering and want to be part of something extraordinary, this could be the role for you. What You Will Do: Assemble mechanical, electrical, pneumatic, hydraulic, and electronic components and sub-assemblies to exacting standards. Build fabricated assemblies of varying sizes and complexities using skills such as marking out, cutting, folding, pipe bending, weld joint preparation, and hydraulic and pneumatic runs. Work from manufacturing drawings, general arrangement drawings, and sub-assembly instructions to ensure precision and alignment. Conduct quality checks on completed assemblies to verify dimensions, alignment, and overall finish. Maintain compliance with Health & Safety policies, ensuring a safe working environment for yourself and others. Undertake additional duties as required to support the production team and meet company objectives. What You Will Bring: A solid engineering background with proven experience in mechanical fitting and assembly. Expertise in using hand and power tools to construct large and small fabricated components. Knowledge of circuitry related to pneumatics, hydraulics, and electrics, with the ability to read and interpret technical drawings. A proactive mindset with strong problem-solving skills and the ability to work independently. Experience in industries such as aviation, military, marine, or similar sectors is highly advantageous. This Mechanical Fitter role plays a vital part in ensuring the company's products meet the highest standards of quality and performance. By bringing your skills and dedication to this team, you will contribute to the company's commitment to delivering innovative solutions and maintaining its reputation as a leader in the industry. Location: This Mechanical Fitter position is based in a well-equipped production facility, offering a supportive and professional environment to excel in your career. Interested?: If you're excited about the opportunity to showcase your engineering expertise and be part of a team that values craftsmanship and innovation, don't wait! Apply today and take the first step towards an inspiring new chapter in your career. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Sep 01, 2025
Full time
Are you ready to take your engineering expertise to the next level? This Mechanical Fitter role offers an exceptional opportunity to be part of a dynamic production team, working on innovative projects that demand precision, creativity, and a keen eye for detail. With a focus on quality craftsmanship and teamwork, this position is perfect for someone who thrives in a hands-on environment and is eager to contribute to the creation of world-class products. If you're passionate about engineering and want to be part of something extraordinary, this could be the role for you. What You Will Do: Assemble mechanical, electrical, pneumatic, hydraulic, and electronic components and sub-assemblies to exacting standards. Build fabricated assemblies of varying sizes and complexities using skills such as marking out, cutting, folding, pipe bending, weld joint preparation, and hydraulic and pneumatic runs. Work from manufacturing drawings, general arrangement drawings, and sub-assembly instructions to ensure precision and alignment. Conduct quality checks on completed assemblies to verify dimensions, alignment, and overall finish. Maintain compliance with Health & Safety policies, ensuring a safe working environment for yourself and others. Undertake additional duties as required to support the production team and meet company objectives. What You Will Bring: A solid engineering background with proven experience in mechanical fitting and assembly. Expertise in using hand and power tools to construct large and small fabricated components. Knowledge of circuitry related to pneumatics, hydraulics, and electrics, with the ability to read and interpret technical drawings. A proactive mindset with strong problem-solving skills and the ability to work independently. Experience in industries such as aviation, military, marine, or similar sectors is highly advantageous. This Mechanical Fitter role plays a vital part in ensuring the company's products meet the highest standards of quality and performance. By bringing your skills and dedication to this team, you will contribute to the company's commitment to delivering innovative solutions and maintaining its reputation as a leader in the industry. Location: This Mechanical Fitter position is based in a well-equipped production facility, offering a supportive and professional environment to excel in your career. Interested?: If you're excited about the opportunity to showcase your engineering expertise and be part of a team that values craftsmanship and innovation, don't wait! Apply today and take the first step towards an inspiring new chapter in your career. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
We are currently seeking an experienced Mechanical Fitter as part of succession planning for a successful engineering business in Wakefield. We are looking for good all-rounders with experience ranging from sub-assembly to installation and a great attitude / team working skills. Mechanical Fitter - Role and Responsibilities - Maintenance, Assembly, Installation, Special Purpose Machinery Either Apprentice-trained or deemed Skilled through extensive experience Able to read complex assembly and sub-assembly drawings Experience of working in a multi-skilled environment with fabricators and Electrical staff Knowledge of Pneumatics and ability to read a pneumatic circuit Any electrical knowledge an advantage but not essential Team spirited and flexible in your approach to work Mechanical Fitter, Maintenance, Assembly, Installation, Special Purpose Machinery If this could appeal please do apply now!
Sep 01, 2025
Full time
We are currently seeking an experienced Mechanical Fitter as part of succession planning for a successful engineering business in Wakefield. We are looking for good all-rounders with experience ranging from sub-assembly to installation and a great attitude / team working skills. Mechanical Fitter - Role and Responsibilities - Maintenance, Assembly, Installation, Special Purpose Machinery Either Apprentice-trained or deemed Skilled through extensive experience Able to read complex assembly and sub-assembly drawings Experience of working in a multi-skilled environment with fabricators and Electrical staff Knowledge of Pneumatics and ability to read a pneumatic circuit Any electrical knowledge an advantage but not essential Team spirited and flexible in your approach to work Mechanical Fitter, Maintenance, Assembly, Installation, Special Purpose Machinery If this could appeal please do apply now!
Job Title: Mechanical Fitter ( Voith Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: DOE Hours :7am till 5pm Monday to Thursday and 7am till 1pm on a Friday please note hours will be reducing to 40 hours from 1st September to (Mon-Thurs 7am - 4pm and Fri 7am - 1pm) Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters with Gearbox and transmission experience The role of the Mechanical Fitter is to build transmission and sub-assembly to a high standard. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters who specialise in transmission and gear boxes. Responsibilities Understanding of vehicle mechanical interfaces and repairs of vehicle components Able to install and repair Fault find and diagnostic investigation work Mechanical knowledge Repairing or replacing parts, old and new. Understand and follow drawings Work to company safety Subject to a Drugs & Alcohol test Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Sep 01, 2025
Contractor
Job Title: Mechanical Fitter ( Voith Fitter) Location: Barton Under Needwood , Staffordshire Duration: Contract (6 months min) Pay Rate: DOE Hours :7am till 5pm Monday to Thursday and 7am till 1pm on a Friday please note hours will be reducing to 40 hours from 1st September to (Mon-Thurs 7am - 4pm and Fri 7am - 1pm) Own transport recommended due to location Our Client based in the Burton on Trent area are looking for Mechanical Fitters with Gearbox and transmission experience The role of the Mechanical Fitter is to build transmission and sub-assembly to a high standard. Ideal candidates would be experienced HGV fitters / Heavy Plant Fitters who specialise in transmission and gear boxes. Responsibilities Understanding of vehicle mechanical interfaces and repairs of vehicle components Able to install and repair Fault find and diagnostic investigation work Mechanical knowledge Repairing or replacing parts, old and new. Understand and follow drawings Work to company safety Subject to a Drugs & Alcohol test Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Jonathan Lee Recruitment Ltd
Wavendon, Bedfordshire
Manufacturing and Assembly Fitter - Aerospace and Defence Permanent Long Term - Milton Keynes Area Attractive An opportunity has arisen for Manufacturing and Assembly Fitter to join an Aerospace and Defence Organisation within the Milton Keynes area. The successful Manufacturing and Assembly Fitter will join the Design and Manufacture Department to work as part of a professional team, fitting and assembling intricate components. The Manufacturing and Assembly Fitter will be reporting to the Fitting Section Team Leader, the successful candidate will be a team player, confident individual with a positive attitude. The Manufacturing and Assembly Fitter is required to have skills and qualifications that include a mix of technical training, craftsmanship and attention to detail. This Manufacturing and Assembly Fitter role will be ideal for someone with manual dexterity and experienced in working environments requiring extreme precision and care. Working hours: Full time, 38 hours per week (some shift work may be required at busy times only). Responsibilities Required for Manufacturing and Assembly Fitter Conduct all aspects of fitting activity (hand working surfaces to remove machine marks, blending component joint lines to remove steps/gaps. Fitting precision components and assembling models as directed by the Fitting Team Lead. Monitor the serviceability of Fitting Section machines, equipment, and tooling. Report potential problems to the Fitting Section Team Leader. If required and when deemed qualified to do so, support on the job training and provide guidance to less experienced staff working in the Fitting Section. Ensure that the minimum direct (project) booking requirement is achieved. When on shifts, ensure a safe and timely handover of the work in progress to the incoming shift and TL, ensuring that adequate notes and technical advice are available. Make recommendations for process improvement in Fitting techniques, where appropriate, to the Fitting Section Team Leader. Skills, Qualifications and Knowledge Required for Manufacturing and Assembly Fitter NVQ and/or BTEC in Mechanical Engineering, Manufacturing, Metalworking or Fabrication. A served apprentice in model making, tool making or mechanical fitting. Demonstrable experience in manual and powered tools (lathes, grinder, drills). Ability to read an interpret technical drawings or CAD design. Understanding of other skills such as EDM, turning, jig boring, grinding and CNC machining. Knowledge of metal properties and safe handling of precious materials. High attention to detail and ability to work independently and as part of a team. There are excellent opportunities for career development. This is an exciting permanent opportunity for the right person to be part of a successful and highly skilled engineering company, working 38 hours per week, Monday to Friday. In return, we offer a range of benefits including: Competitive salary and pension scheme Free parking and shares incentive plan Employee assistance programme Private health insurance 26 day's annual leave plus Bank Holidays (increasing after 5 year's service) The successful candidate must be a Sole British National able to satisfy security clearance (SC) requirements including last 5 years continual UK residency due to projects/products involved If you feel you meet the requirements for the role of the Manufacturing and Assembly Fitter, then apply directly or contact Peter Heap at Jonathan Lee Recruitment . Either Direct Line (phone number removed) or Email suitable MS Word CV s to (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Sep 01, 2025
Full time
Manufacturing and Assembly Fitter - Aerospace and Defence Permanent Long Term - Milton Keynes Area Attractive An opportunity has arisen for Manufacturing and Assembly Fitter to join an Aerospace and Defence Organisation within the Milton Keynes area. The successful Manufacturing and Assembly Fitter will join the Design and Manufacture Department to work as part of a professional team, fitting and assembling intricate components. The Manufacturing and Assembly Fitter will be reporting to the Fitting Section Team Leader, the successful candidate will be a team player, confident individual with a positive attitude. The Manufacturing and Assembly Fitter is required to have skills and qualifications that include a mix of technical training, craftsmanship and attention to detail. This Manufacturing and Assembly Fitter role will be ideal for someone with manual dexterity and experienced in working environments requiring extreme precision and care. Working hours: Full time, 38 hours per week (some shift work may be required at busy times only). Responsibilities Required for Manufacturing and Assembly Fitter Conduct all aspects of fitting activity (hand working surfaces to remove machine marks, blending component joint lines to remove steps/gaps. Fitting precision components and assembling models as directed by the Fitting Team Lead. Monitor the serviceability of Fitting Section machines, equipment, and tooling. Report potential problems to the Fitting Section Team Leader. If required and when deemed qualified to do so, support on the job training and provide guidance to less experienced staff working in the Fitting Section. Ensure that the minimum direct (project) booking requirement is achieved. When on shifts, ensure a safe and timely handover of the work in progress to the incoming shift and TL, ensuring that adequate notes and technical advice are available. Make recommendations for process improvement in Fitting techniques, where appropriate, to the Fitting Section Team Leader. Skills, Qualifications and Knowledge Required for Manufacturing and Assembly Fitter NVQ and/or BTEC in Mechanical Engineering, Manufacturing, Metalworking or Fabrication. A served apprentice in model making, tool making or mechanical fitting. Demonstrable experience in manual and powered tools (lathes, grinder, drills). Ability to read an interpret technical drawings or CAD design. Understanding of other skills such as EDM, turning, jig boring, grinding and CNC machining. Knowledge of metal properties and safe handling of precious materials. High attention to detail and ability to work independently and as part of a team. There are excellent opportunities for career development. This is an exciting permanent opportunity for the right person to be part of a successful and highly skilled engineering company, working 38 hours per week, Monday to Friday. In return, we offer a range of benefits including: Competitive salary and pension scheme Free parking and shares incentive plan Employee assistance programme Private health insurance 26 day's annual leave plus Bank Holidays (increasing after 5 year's service) The successful candidate must be a Sole British National able to satisfy security clearance (SC) requirements including last 5 years continual UK residency due to projects/products involved If you feel you meet the requirements for the role of the Manufacturing and Assembly Fitter, then apply directly or contact Peter Heap at Jonathan Lee Recruitment . Either Direct Line (phone number removed) or Email suitable MS Word CV s to (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Expleo is seeking a Test Rig Design Engineer to support one of our leading automotive customers based in Warwickshire on an initial 12 month contract . This is a fantastic opportunity to contribute to cutting-edge vehicle testing and development within a world-class engineering environment. You'll be part of the Facility & Technology Development team, responsible for designing and delivering bespoke test rigs and fixtures that support a wide range of physical testing activities - from component-level to full vehicle testing. This role is central to enabling the delivery of core engineering test plans across multiple labs. Key Responsibilities: Design test rigs and components using 3DX (Catia V6) from concept to delivery. Produce 2D manufacturing drawings for internal and external fabrication. Collaborate with internal customers to define testing requirements. Work closely with workshop fitters and supervisors to ensure successful rig assembly. Plan and manage workload to meet project timelines. Validate designs using hand calculations, kinematics, MBS, FEA/CAE. Prepare and present technical reports. Skills & Experience: Strong understanding of vehicle testing methodologies. Knowledge of vehicle architecture, components, and mechanical systems. Proficient in 3D CAD modelling and interpreting complex 2D drawings. Familiarity with manufacturing techniques and design optimization. Excellent problem-solving and workload management skills. Ability to resolve technical and process issues independently.
Sep 01, 2025
Contractor
Expleo is seeking a Test Rig Design Engineer to support one of our leading automotive customers based in Warwickshire on an initial 12 month contract . This is a fantastic opportunity to contribute to cutting-edge vehicle testing and development within a world-class engineering environment. You'll be part of the Facility & Technology Development team, responsible for designing and delivering bespoke test rigs and fixtures that support a wide range of physical testing activities - from component-level to full vehicle testing. This role is central to enabling the delivery of core engineering test plans across multiple labs. Key Responsibilities: Design test rigs and components using 3DX (Catia V6) from concept to delivery. Produce 2D manufacturing drawings for internal and external fabrication. Collaborate with internal customers to define testing requirements. Work closely with workshop fitters and supervisors to ensure successful rig assembly. Plan and manage workload to meet project timelines. Validate designs using hand calculations, kinematics, MBS, FEA/CAE. Prepare and present technical reports. Skills & Experience: Strong understanding of vehicle testing methodologies. Knowledge of vehicle architecture, components, and mechanical systems. Proficient in 3D CAD modelling and interpreting complex 2D drawings. Familiarity with manufacturing techniques and design optimization. Excellent problem-solving and workload management skills. Ability to resolve technical and process issues independently.
