Job title: Principal Nuclear Safety Engineer Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Deputising for the PNED Build Assurance Manager as Required Supporting or lead Nuclear Safety Engineering activities for the Astute and Dreadnought programme, including resolution of emergent issues during the Build and Commission of the Naval Reactor Plant using application of common Safety Engineering techniques where appropriate Act as the Intelligent Customer for documentation, advice, services concerning the Naval Reactor Plant and safety case provided to the company Developing sound technical solutions to issues arising during construction and commissioning of the Naval Reactor Plant Authoring inputs to the Office of the Chief Engineer advising on the compliance of the "as built" Naval Reactor Plant against design, build and commissioning requirements in support of entry in nuclear build phases Carry out nuclear safety assessment of the impact of changes to, and deviations from, the Naval Reactor Plant design intent Liaising with both internal and external customers as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Your skills and experiences: Essential: Degree level qualification (or equivalent) in a relevant subject such as Engineering of Physical Science Understanding of the design, build, commissioning, and operation of Reactor Plant systems Demonstrable competence of technical report writing Desirable: Engineering experience in design and build of systems, including and understanding of the role that safety and quality play Ability to lead engineering investigations, including Root Cause Analysis The ability to constructively challenge and influence others, whilst putting forward clear, concise and credible reasoning to support judgements Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits. Including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PNED team: This role offers you the opportunity to gain in-depth knowledge of the Naval Reactor Plant for both the Astute Class and Dreadnought Class of submarines. The role also provides a rare opportunity to be involved in a broad range of the Engineering Lifecycle for a Naval Reactor Plant, from Engineering Design Reviews through to build, test and commissioning activities, including but not limited to, resolution of emergent issues providing support to the wider PNED teams. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. LI-GM3 LI-Hybrid
Sep 04, 2025
Full time
Job title: Principal Nuclear Safety Engineer Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Deputising for the PNED Build Assurance Manager as Required Supporting or lead Nuclear Safety Engineering activities for the Astute and Dreadnought programme, including resolution of emergent issues during the Build and Commission of the Naval Reactor Plant using application of common Safety Engineering techniques where appropriate Act as the Intelligent Customer for documentation, advice, services concerning the Naval Reactor Plant and safety case provided to the company Developing sound technical solutions to issues arising during construction and commissioning of the Naval Reactor Plant Authoring inputs to the Office of the Chief Engineer advising on the compliance of the "as built" Naval Reactor Plant against design, build and commissioning requirements in support of entry in nuclear build phases Carry out nuclear safety assessment of the impact of changes to, and deviations from, the Naval Reactor Plant design intent Liaising with both internal and external customers as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Your skills and experiences: Essential: Degree level qualification (or equivalent) in a relevant subject such as Engineering of Physical Science Understanding of the design, build, commissioning, and operation of Reactor Plant systems Demonstrable competence of technical report writing Desirable: Engineering experience in design and build of systems, including and understanding of the role that safety and quality play Ability to lead engineering investigations, including Root Cause Analysis The ability to constructively challenge and influence others, whilst putting forward clear, concise and credible reasoning to support judgements Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits. Including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PNED team: This role offers you the opportunity to gain in-depth knowledge of the Naval Reactor Plant for both the Astute Class and Dreadnought Class of submarines. The role also provides a rare opportunity to be involved in a broad range of the Engineering Lifecycle for a Naval Reactor Plant, from Engineering Design Reviews through to build, test and commissioning activities, including but not limited to, resolution of emergent issues providing support to the wider PNED teams. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. LI-GM3 LI-Hybrid
Position: Quality Assurance Specialist Department: Environmental, Health, Safety & Security (EHSS) - Programmes & Strategy Reports to: EHSS Leadership Location: London Heathrow Travel Requirement: Up to 75% (including nights, weekends, and holidays) Position Summary The Quality Assurance Specialist plays a key role within Unifi's EHSS Programmes & Strategy team, supporting continuous improvement and compliance across safety and operational procedures. This position focuses on evaluating risks, conducting field assessments, and ensuring alignment with both internal policies and external regulatory standards. The successful candidate will help enhance Unifi's Safety Management System (SMS) and support station-level engagement through structured audits and corrective action planning. Key Responsibilities Collaborate with operations, compliance, and safety teams to implement tools, procedures, and processes supporting a robust company-wide Safety Management System. Lead and manage Unifi's internal safety audit programme to ensure operational compliance with both company and regulatory requirements. Evaluate the effectiveness of current procedures and audit findings in reducing safety incidents; recommend and implement improvements as necessary. Conduct field audits and assessments to identify compliance gaps and root causes, propose and track corrective actions. Perform regular site visits to Unifi and customer stations to assess safety practices, coach staff, and promote a proactive safety culture. Collect feedback from local and regional leadership to improve the design and effectiveness of safety programmes. Develop and communicate impactful, scalable corrective actions to support compliance and continuous improvement across the organisation. Required Qualifications & Skills Bachelor's degree in Environmental Health & Safety, Engineering, Aviation Safety, or a related discipline; or 3-6 years of relevant experience in EHSS programme management or operational safety leadership. Ability to independently conduct field audits and summarise findings for leadership review and continuous improvement efforts. Strong analytical and problem-solving skills with the ability to influence cross-functional teams. Excellent technical and business writing skills. Proficient in Microsoft Office 365 (including Word, PowerPoint, SharePoint, Sway), with advanced Excel skills for data management. Preferred Qualifications Experience in airline/aviation operations, especially involving safety or quality assurance programmes. Proficiency with data visualisation tools such as Power BI, Tableau, or Spotfire. Familiarity with digital safety management systems (e.g., Gensuite or similar platforms). Work environment: Office Environment: Standard office conditions with regular multitasking and deadline-driven responsibilities. Field Conditions: Frequent outdoor work in varying weather (rain, heat, cold, etc.) and near aircraft operations, including exposure to fumes, noise, and moving machinery (e.g., jet engines, propellers). Work Schedule: Flexibility required to work varied hours, including nights, weekends, and public holidays, based on operational needs.
Sep 04, 2025
Full time
Position: Quality Assurance Specialist Department: Environmental, Health, Safety & Security (EHSS) - Programmes & Strategy Reports to: EHSS Leadership Location: London Heathrow Travel Requirement: Up to 75% (including nights, weekends, and holidays) Position Summary The Quality Assurance Specialist plays a key role within Unifi's EHSS Programmes & Strategy team, supporting continuous improvement and compliance across safety and operational procedures. This position focuses on evaluating risks, conducting field assessments, and ensuring alignment with both internal policies and external regulatory standards. The successful candidate will help enhance Unifi's Safety Management System (SMS) and support station-level engagement through structured audits and corrective action planning. Key Responsibilities Collaborate with operations, compliance, and safety teams to implement tools, procedures, and processes supporting a robust company-wide Safety Management System. Lead and manage Unifi's internal safety audit programme to ensure operational compliance with both company and regulatory requirements. Evaluate the effectiveness of current procedures and audit findings in reducing safety incidents; recommend and implement improvements as necessary. Conduct field audits and assessments to identify compliance gaps and root causes, propose and track corrective actions. Perform regular site visits to Unifi and customer stations to assess safety practices, coach staff, and promote a proactive safety culture. Collect feedback from local and regional leadership to improve the design and effectiveness of safety programmes. Develop and communicate impactful, scalable corrective actions to support compliance and continuous improvement across the organisation. Required Qualifications & Skills Bachelor's degree in Environmental Health & Safety, Engineering, Aviation Safety, or a related discipline; or 3-6 years of relevant experience in EHSS programme management or operational safety leadership. Ability to independently conduct field audits and summarise findings for leadership review and continuous improvement efforts. Strong analytical and problem-solving skills with the ability to influence cross-functional teams. Excellent technical and business writing skills. Proficient in Microsoft Office 365 (including Word, PowerPoint, SharePoint, Sway), with advanced Excel skills for data management. Preferred Qualifications Experience in airline/aviation operations, especially involving safety or quality assurance programmes. Proficiency with data visualisation tools such as Power BI, Tableau, or Spotfire. Familiarity with digital safety management systems (e.g., Gensuite or similar platforms). Work environment: Office Environment: Standard office conditions with regular multitasking and deadline-driven responsibilities. Field Conditions: Frequent outdoor work in varying weather (rain, heat, cold, etc.) and near aircraft operations, including exposure to fumes, noise, and moving machinery (e.g., jet engines, propellers). Work Schedule: Flexibility required to work varied hours, including nights, weekends, and public holidays, based on operational needs.
Graduate Network Engineer Hybrid role - 2 days per week on site, 3 days WFH This is an exciting opportunity for a recent Computer Networking graduate to begin a career with a leading Managed Services Provider (MSP) that delivers Cloud, Connectivity, Unified Communications, and Collaboration services to enterprise-scale organisations and household-name clients. The company has grown rapidly through both acquisition and organic expansion, and they are now looking for a motivated graduate with a strong interest in networking and IT infrastructure to join their Network Support team. As part of an experienced and collaborative technical team, you will gain hands-on exposure to real-world networking environments, troubleshooting issues and developing a broad technical skill set. This is an excellent platform for career progression, with structured training and opportunities to advance into specialist roles. Key Responsibilities: Provide high-quality IT and network support to clients, ensuring service levels are met Troubleshoot and resolve incidents, escalating where required Maintain and update internal technical documentation Continuously build your knowledge across networking, cloud services, and IT systems Work closely with senior engineers to gain mentorship and experience in enterprise environments Requirements: A degree in Computer Networking, Network Engineering, or hold a relevant certification (CompTIA etc.) A basic knowledge/interest of Cisco networking fundamentals (routers, switches, firewalls) Strong communication skills and a passion for developing a technical career Salary & Benefits 30,000 - 36,000 DOE (inclusive of shift alowance) Hybrid working (2 days onsite, 3 days WFH) plus excellent benefits and a clear pathways for career progression into senior engineering and specialist roles Working Hours: Mon-Thu 9am-5:30pm, Fri 9am-3:30pm Alternative shift option: 2 days, 2 nights, 4 days off (7am-7pm / 7pm-7am), with 1 day per week onsite (rest WFH) plus 20% shift allowance.
Sep 04, 2025
Full time
Graduate Network Engineer Hybrid role - 2 days per week on site, 3 days WFH This is an exciting opportunity for a recent Computer Networking graduate to begin a career with a leading Managed Services Provider (MSP) that delivers Cloud, Connectivity, Unified Communications, and Collaboration services to enterprise-scale organisations and household-name clients. The company has grown rapidly through both acquisition and organic expansion, and they are now looking for a motivated graduate with a strong interest in networking and IT infrastructure to join their Network Support team. As part of an experienced and collaborative technical team, you will gain hands-on exposure to real-world networking environments, troubleshooting issues and developing a broad technical skill set. This is an excellent platform for career progression, with structured training and opportunities to advance into specialist roles. Key Responsibilities: Provide high-quality IT and network support to clients, ensuring service levels are met Troubleshoot and resolve incidents, escalating where required Maintain and update internal technical documentation Continuously build your knowledge across networking, cloud services, and IT systems Work closely with senior engineers to gain mentorship and experience in enterprise environments Requirements: A degree in Computer Networking, Network Engineering, or hold a relevant certification (CompTIA etc.) A basic knowledge/interest of Cisco networking fundamentals (routers, switches, firewalls) Strong communication skills and a passion for developing a technical career Salary & Benefits 30,000 - 36,000 DOE (inclusive of shift alowance) Hybrid working (2 days onsite, 3 days WFH) plus excellent benefits and a clear pathways for career progression into senior engineering and specialist roles Working Hours: Mon-Thu 9am-5:30pm, Fri 9am-3:30pm Alternative shift option: 2 days, 2 nights, 4 days off (7am-7pm / 7pm-7am), with 1 day per week onsite (rest WFH) plus 20% shift allowance.
FMS (Facility Monitoring Systems Ltd) serves businesses in diverse and demanding markets where environmental monitoring is mission-critical and strong, trusted business relationships are essential. FMS is a Gold Channel Partner to industry-leading airborne particle counter manufacturer TSI Inc. and the sole Channel Partner for the TSI range of contamination control products in the UK and Ireland. FMS is also the exclusive UK partner to monitoring software platform developer ViGIE. This is an exceptional opportunity to grow professionally within a dynamic international environment, collaborate with diverse teams, and make a meaningful impact. About the Role Joining our team as the Business Unit Manager for Facility Monitoring Systems, (FMS) you will be responsible for overseeing the strategic, operational, and financial performance of the business unit based in Malvern. The role encompasses leadership of a cross-functional team to ensure high-quality delivery of monitoring solutions, development of long-term business strategies, and management of client and stakeholder relationships. Proven experience in engineering in senior management within a technical or engineering based business, with strong project management skills. Solid understanding of quality and regulatory standards (e.g. GxP, ISO, FDA) Demonstrated commitment to sustainability and environmental responsibility. Excellent communication and leadership abilities, with strong commercial acumen and understanding of P & L management. Requirements Joining our team, our People are one of our core pillars, so, you will display excellent communication and leadership skills, capable of inspiring and managing cross functional teams. Ability to manage multiple projects and priorities in a dynamic environment. A strategic thinker with a proactive and results driven approach. Essential qualifications, skills and experience include: Proven experience in a senior management role withing a technical or engineering based business. Excellent leadership and people management. Experience in the facility monitoring, instrumentation, clean room construction / management, or building management system sectors is strongly preferred. Strong understanding of quality and regulatory standards (GxP, ISO, FDA). Proven track record of managing multiple projects. Demonstrable commercial acumen and understanding of P&L managment. Excellent interpersonal and communication skills to work effectively with diverse, international teams. Bachelors degree in Engineering, Business Management, or a related field, or by demonstrated experience. Proficient in using business and project management software tools.
Sep 04, 2025
Full time
FMS (Facility Monitoring Systems Ltd) serves businesses in diverse and demanding markets where environmental monitoring is mission-critical and strong, trusted business relationships are essential. FMS is a Gold Channel Partner to industry-leading airborne particle counter manufacturer TSI Inc. and the sole Channel Partner for the TSI range of contamination control products in the UK and Ireland. FMS is also the exclusive UK partner to monitoring software platform developer ViGIE. This is an exceptional opportunity to grow professionally within a dynamic international environment, collaborate with diverse teams, and make a meaningful impact. About the Role Joining our team as the Business Unit Manager for Facility Monitoring Systems, (FMS) you will be responsible for overseeing the strategic, operational, and financial performance of the business unit based in Malvern. The role encompasses leadership of a cross-functional team to ensure high-quality delivery of monitoring solutions, development of long-term business strategies, and management of client and stakeholder relationships. Proven experience in engineering in senior management within a technical or engineering based business, with strong project management skills. Solid understanding of quality and regulatory standards (e.g. GxP, ISO, FDA) Demonstrated commitment to sustainability and environmental responsibility. Excellent communication and leadership abilities, with strong commercial acumen and understanding of P & L management. Requirements Joining our team, our People are one of our core pillars, so, you will display excellent communication and leadership skills, capable of inspiring and managing cross functional teams. Ability to manage multiple projects and priorities in a dynamic environment. A strategic thinker with a proactive and results driven approach. Essential qualifications, skills and experience include: Proven experience in a senior management role withing a technical or engineering based business. Excellent leadership and people management. Experience in the facility monitoring, instrumentation, clean room construction / management, or building management system sectors is strongly preferred. Strong understanding of quality and regulatory standards (GxP, ISO, FDA). Proven track record of managing multiple projects. Demonstrable commercial acumen and understanding of P&L managment. Excellent interpersonal and communication skills to work effectively with diverse, international teams. Bachelors degree in Engineering, Business Management, or a related field, or by demonstrated experience. Proficient in using business and project management software tools.
Jonathan Lee Recruitment Ltd
Wellington, Shropshire
PRODUCTION TECHNICIANS NEEDED IN TELFORD, SHROPSHIRE Do you have experience working with the Food Manufacturing, Food Packaging, FMCG or the Manufacturing Industry, and are you looking for a new permanent job to start ASAP?! Due to an increase within their production facility and 2 new production lines being installed this year, we are looking for 8 Production Technicians to join a food manufacturing business in Telford on a permanent basis. These jobs will be working on a 4 on 4 off shift pattern (12 hour days and nights shifts), the starting salary is just over £33,733 per annum, initially rising to just under £37,500 per annum, and then finally increase to just over £41,000 per annum once fully signed off and trained. The hiring manager is looking for someone who lives within a 25-mile radius of Telford, Shropshire. This will be a 2 stage interview process, with the first stage consisting of a numeracy and literacy assessment on site in Telford, Shropshire. These roles would be a great fit for someone who has previously worked as a Manufacturing Technician, Senior Operator, Skilled Operator, Technical Operator, Process Operator, Skilled Machine Operator, Machine Setter or Skilled Machinist within a production/manufacturing facility. What You Will Do: Take ownership of a production line's performance, ensuring it operates efficiently and smoothly at all times. Lead a team of machine operators, providing training, guidance, and driving performance to meet targets. Identify potential faults, investigate technical issues, and solve problems to minimise downtime. Drive continuous improvement initiatives, refining processes to boost productivity and operational standards. Ensure full compliance with Food Safety, Quality, and Health & Safety standards. Perform start-ups, changeovers, and run the production line according to standard operating procedures. What You Will Bring: A strong technical mindset and a passion for working with machinery. Experience in a fast-paced production environment, ideally within the food or processing industry. A proactive approach to problem-solving, with a focus on delivering results. A desire to learn new techniques and embrace continuous improvement and lean manufacturing principles. Excellent communication skills, with the ability to collaborate effectively and challenge when necessary. This role is an incredible opportunity to work with cutting-edge production lines and contribute to a company that values determination, quality, integrity, and teamwork. You'll be part of a business that's constantly pushing boundaries and investing in its people, offering a platform for growth and development. Location: The role is based in Telford, Shropshire. Interested?: If you're ready to step into a challenging and rewarding role as a Production Technician , don't miss this opportunity! Apply now and take the first step towards advancing your career in a thriving industry. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Sep 04, 2025
Full time
PRODUCTION TECHNICIANS NEEDED IN TELFORD, SHROPSHIRE Do you have experience working with the Food Manufacturing, Food Packaging, FMCG or the Manufacturing Industry, and are you looking for a new permanent job to start ASAP?! Due to an increase within their production facility and 2 new production lines being installed this year, we are looking for 8 Production Technicians to join a food manufacturing business in Telford on a permanent basis. These jobs will be working on a 4 on 4 off shift pattern (12 hour days and nights shifts), the starting salary is just over £33,733 per annum, initially rising to just under £37,500 per annum, and then finally increase to just over £41,000 per annum once fully signed off and trained. The hiring manager is looking for someone who lives within a 25-mile radius of Telford, Shropshire. This will be a 2 stage interview process, with the first stage consisting of a numeracy and literacy assessment on site in Telford, Shropshire. These roles would be a great fit for someone who has previously worked as a Manufacturing Technician, Senior Operator, Skilled Operator, Technical Operator, Process Operator, Skilled Machine Operator, Machine Setter or Skilled Machinist within a production/manufacturing facility. What You Will Do: Take ownership of a production line's performance, ensuring it operates efficiently and smoothly at all times. Lead a team of machine operators, providing training, guidance, and driving performance to meet targets. Identify potential faults, investigate technical issues, and solve problems to minimise downtime. Drive continuous improvement initiatives, refining processes to boost productivity and operational standards. Ensure full compliance with Food Safety, Quality, and Health & Safety standards. Perform start-ups, changeovers, and run the production line according to standard operating procedures. What You Will Bring: A strong technical mindset and a passion for working with machinery. Experience in a fast-paced production environment, ideally within the food or processing industry. A proactive approach to problem-solving, with a focus on delivering results. A desire to learn new techniques and embrace continuous improvement and lean manufacturing principles. Excellent communication skills, with the ability to collaborate effectively and challenge when necessary. This role is an incredible opportunity to work with cutting-edge production lines and contribute to a company that values determination, quality, integrity, and teamwork. You'll be part of a business that's constantly pushing boundaries and investing in its people, offering a platform for growth and development. Location: The role is based in Telford, Shropshire. Interested?: If you're ready to step into a challenging and rewarding role as a Production Technician , don't miss this opportunity! Apply now and take the first step towards advancing your career in a thriving industry. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Full Stack Engineer (AI/ML, Python, Agentic) - Global Tech Company - London Day rate: £500 - £700 (inside IR35) Duration: 12 months Hybrid: 3 days per week Start: ASAP My exciting new client is looking for a Full Stack Engineer with AI/ML and Python experience. Hybrid working 3 days per week in the London office. Key Qualifications: 10+ years designing and developing operational support systems and automation solutions in Python, 5+ years leading reviews and ensuring quality in others' work. Hands-on experience with Selenium, and iOS functional automation. Experience with testing activities across the entire lifecycle of the project from inception to delivery. Front-End Development: Design and implement user interfaces using JavaScript, and frameworks such as React. Back-End Development: Develop and maintain server-side logic using Python. Manage APIs and integrate third-party services and tools. Ensure application data integrity and security by designing and managing databases in Postgres. AI/ML Expertise: Build and deploy Agentic systems, MCP servers/clients, and Retrieval-Augmented Generation (RAG) systems with Large Language Models (LLMs). Extract, transform, and load (ETL) data to build vector databases with embedding models. DevOps and Maintenance: Implement CI/CD pipelines to streamline development workflows in Jenkins. Monitor application performance and troubleshoot issues to maintain reliability and availability. Preferred Qualifications: Experience with building multi-agent systems and understanding of multi-agent design patterns. Graph database knowledge is a plus. Proficient with tools such as Charles, Git, and Jenkins. Automate data analytics and reporting across multiple systems. Strong understanding of software build tools and CI/CD integrations Lead coordination with multiple Engineering and Product teams to expedite issue prioritization and resolution. Create detailed test reports documenting progress, status, test plan completion, identified defects, and associated risks. Responsibilities: As part of the Automation Team, you will independently design and develop automation solutions in line with requirements provided by the Product team. Stay up to date with AI/ML trends across the industry and within to inform and influence design decisions. Develop test strategies, plans, cases, and scripts for both existing functionality and new features. Contribute to multiple initiatives, balancing new feature development with documentation and on-time delivery. Communicate status and progress in a timely manner, including sprint review reports, presentations, and planning demos for new features and MVPs. Participate in Scrum ceremonies and cross-functional meetings to strengthen collaboration within and across teams. Rates depend on experience and client requirements
Sep 04, 2025
Full time
Full Stack Engineer (AI/ML, Python, Agentic) - Global Tech Company - London Day rate: £500 - £700 (inside IR35) Duration: 12 months Hybrid: 3 days per week Start: ASAP My exciting new client is looking for a Full Stack Engineer with AI/ML and Python experience. Hybrid working 3 days per week in the London office. Key Qualifications: 10+ years designing and developing operational support systems and automation solutions in Python, 5+ years leading reviews and ensuring quality in others' work. Hands-on experience with Selenium, and iOS functional automation. Experience with testing activities across the entire lifecycle of the project from inception to delivery. Front-End Development: Design and implement user interfaces using JavaScript, and frameworks such as React. Back-End Development: Develop and maintain server-side logic using Python. Manage APIs and integrate third-party services and tools. Ensure application data integrity and security by designing and managing databases in Postgres. AI/ML Expertise: Build and deploy Agentic systems, MCP servers/clients, and Retrieval-Augmented Generation (RAG) systems with Large Language Models (LLMs). Extract, transform, and load (ETL) data to build vector databases with embedding models. DevOps and Maintenance: Implement CI/CD pipelines to streamline development workflows in Jenkins. Monitor application performance and troubleshoot issues to maintain reliability and availability. Preferred Qualifications: Experience with building multi-agent systems and understanding of multi-agent design patterns. Graph database knowledge is a plus. Proficient with tools such as Charles, Git, and Jenkins. Automate data analytics and reporting across multiple systems. Strong understanding of software build tools and CI/CD integrations Lead coordination with multiple Engineering and Product teams to expedite issue prioritization and resolution. Create detailed test reports documenting progress, status, test plan completion, identified defects, and associated risks. Responsibilities: As part of the Automation Team, you will independently design and develop automation solutions in line with requirements provided by the Product team. Stay up to date with AI/ML trends across the industry and within to inform and influence design decisions. Develop test strategies, plans, cases, and scripts for both existing functionality and new features. Contribute to multiple initiatives, balancing new feature development with documentation and on-time delivery. Communicate status and progress in a timely manner, including sprint review reports, presentations, and planning demos for new features and MVPs. Participate in Scrum ceremonies and cross-functional meetings to strengthen collaboration within and across teams. Rates depend on experience and client requirements
Assistant Buyer - Construction experience - Walsall The Role As an assistant buyer, you will be responsible for providing our nationwide delivery teams with a company-compliant professional material supply service whilst working with and supporting other business needs. You will be communicating with internal business units, external suppliers, trade bodies and associations to achieve the best value on goods and services whilst being mindful of where materials are coming from within the supply chain, and ensuring the company continues to source ethically and sustainably. The successful candidate will be joining a team which is at the forefront of developing the company's Social Impact and Sustainability objectives, giving you a great opportunity to play a key role in enforcing those goals. Key Responsibilities: Buying Tasks Procuring construction materials and related services across all operational sectors. Carrying out supplier selection, evaluating quotations, and negotiating prices and logistics. Proactively identifying market trends, product and industry developments and supply chain innovations through the engagement of external partners, leading as directed by the Procurement Manager on any specific commodity or category. Providing commercial assistance on the contracts you are procuring for. Liaising with sites and supply chain partners, developing relationships to ensure a planned "right-first-time" service is provided regarding safety, quality, programme, commercial aspects, and overall best value. Working with and supporting internal business needs regarding commercial and product awareness at all stages of the construction process, ensuring that we jointly deliver major programme requirements. Ensuring continuous communication with other team members to review contract progress and address associated issues immediately. Maintaining full knowledge and understanding of purchasing strategy and processes to ensure a professional and auditable procurement contract is in place. Accountabilities Operating within financial governance levels Managing work priorities and maximising efficiencies Maintaining positive supplier relationships Adherence to procurement procedures Administrative responsibilities Maintenance and upkeep of order and supply chain records utilising the company's purchase order system and procedures. Providing reports, data, and other material identified by the Procurement Manager relating to the department and whole business requirements, including KPIs. Submitting detailed analysis to procurement and project teams for approval in line with governance. Key measures & targets: To provide evidence of best value regarding procurement, which may include commercial betterment, quality, and efficiency. To evidence supply chain engagement, including performance management under company objectives. Key relationships: Procurement Manager / Supply Chain Manager / Senior Buyer / External Hire Desk Manager, and all levels of procurement personnel in both the central and regional teams All internal departments, including site operations, HSEQ, estimating, accounts and business development. External supply chain partners Essential Relevant experience in a similar role, ideally within the Rail or construction/engineering industry Experienced negotiator, with the ability to establish long-term relationships and an engaged, collaborative supply chain Demonstrable commercial awareness, with the ability to control and monitor budgets Finely tuned communication skills regarding engaging with external and internal parties, including a confident and professional telephone manner Excellent computer literacy with experience using Microsoft Office packages In-house purchasing systems. Ability to cope with a demanding, fast-paced environment, ensuring deadlines are met Ability to make decisions using own initiative and work as part of a team Desireable CIPS qualification or working towards CIPS Relevant degree or equivalent/or qualified by experience (QBE) A full UK driving licence
Sep 04, 2025
Full time
Assistant Buyer - Construction experience - Walsall The Role As an assistant buyer, you will be responsible for providing our nationwide delivery teams with a company-compliant professional material supply service whilst working with and supporting other business needs. You will be communicating with internal business units, external suppliers, trade bodies and associations to achieve the best value on goods and services whilst being mindful of where materials are coming from within the supply chain, and ensuring the company continues to source ethically and sustainably. The successful candidate will be joining a team which is at the forefront of developing the company's Social Impact and Sustainability objectives, giving you a great opportunity to play a key role in enforcing those goals. Key Responsibilities: Buying Tasks Procuring construction materials and related services across all operational sectors. Carrying out supplier selection, evaluating quotations, and negotiating prices and logistics. Proactively identifying market trends, product and industry developments and supply chain innovations through the engagement of external partners, leading as directed by the Procurement Manager on any specific commodity or category. Providing commercial assistance on the contracts you are procuring for. Liaising with sites and supply chain partners, developing relationships to ensure a planned "right-first-time" service is provided regarding safety, quality, programme, commercial aspects, and overall best value. Working with and supporting internal business needs regarding commercial and product awareness at all stages of the construction process, ensuring that we jointly deliver major programme requirements. Ensuring continuous communication with other team members to review contract progress and address associated issues immediately. Maintaining full knowledge and understanding of purchasing strategy and processes to ensure a professional and auditable procurement contract is in place. Accountabilities Operating within financial governance levels Managing work priorities and maximising efficiencies Maintaining positive supplier relationships Adherence to procurement procedures Administrative responsibilities Maintenance and upkeep of order and supply chain records utilising the company's purchase order system and procedures. Providing reports, data, and other material identified by the Procurement Manager relating to the department and whole business requirements, including KPIs. Submitting detailed analysis to procurement and project teams for approval in line with governance. Key measures & targets: To provide evidence of best value regarding procurement, which may include commercial betterment, quality, and efficiency. To evidence supply chain engagement, including performance management under company objectives. Key relationships: Procurement Manager / Supply Chain Manager / Senior Buyer / External Hire Desk Manager, and all levels of procurement personnel in both the central and regional teams All internal departments, including site operations, HSEQ, estimating, accounts and business development. External supply chain partners Essential Relevant experience in a similar role, ideally within the Rail or construction/engineering industry Experienced negotiator, with the ability to establish long-term relationships and an engaged, collaborative supply chain Demonstrable commercial awareness, with the ability to control and monitor budgets Finely tuned communication skills regarding engaging with external and internal parties, including a confident and professional telephone manner Excellent computer literacy with experience using Microsoft Office packages In-house purchasing systems. Ability to cope with a demanding, fast-paced environment, ensuring deadlines are met Ability to make decisions using own initiative and work as part of a team Desireable CIPS qualification or working towards CIPS Relevant degree or equivalent/or qualified by experience (QBE) A full UK driving licence
We're looking for a Skilled Operative to join our Water team based in Worcester for our Severn Trent Water contract. Location: Worcester - site based Hours: 45 hours per week - 12 Month Fixed Term Contract What will you be responsible for? As a Skilled Operative, you'll be working within the Water team, supporting them in delivering a variety of civil engineering activities across both water and water recycling sites. This is a hands-on, multi-skilled role where safety, quality, and performance are always the top priority. What will your day to day in the role look like? Your day to day will include: Carrying out a variety of site-based civil engineering tasks, including pipe laying, drainage, concrete works, and underground chamber construction. Operating plant and equipment such as excavators, dumpers, and rollers safely and effectively. Reading and interpreting drawings and plans to support accurate delivery on site. Ensuring full compliance with health, safety, and environmental procedures at all times. Supporting the timely delivery of projects in line with standards, regulations, and budgets. What are we looking for? This role of Skilled Operative is great for you if you have: Knowledge and experience within the water industry, with skills in pipe laying, drainage, and deep drainage. A valid CSCS or EUSR card, plus a full driving licence. Confined space training (or willingness to undertake it) and tickets in areas such as NPORS Slinger Signaller, COSHH, or Advanced Scaffold Inspection. We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. If you would like to explore more about the incredible growth and scale of our water business, dive into our diverse project portfolios, and uncover both current and future career opportunities. You can see more information about our water business here. There's never been a better time to get involved, register your interest today and take the first step toward a rewarding career with us! Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. If you would like to explore more about the incredible growth and scale of our water business, dive into our diverse project portfolios, and uncover both current and future career opportunities. You can see more information about our water business here. There's never been a better time to get involved, register your interest today and take the first step toward a rewarding career with us! Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to Matched pension scheme up to 7.5%, Life Assurance, Enhanced Family Friendly Policies, Discounts on go-to brands, Free Heath and wellbeing services, Training and development schemes, Electric Vehicle Leasing, Paid volunteering leave.
Sep 04, 2025
Full time
We're looking for a Skilled Operative to join our Water team based in Worcester for our Severn Trent Water contract. Location: Worcester - site based Hours: 45 hours per week - 12 Month Fixed Term Contract What will you be responsible for? As a Skilled Operative, you'll be working within the Water team, supporting them in delivering a variety of civil engineering activities across both water and water recycling sites. This is a hands-on, multi-skilled role where safety, quality, and performance are always the top priority. What will your day to day in the role look like? Your day to day will include: Carrying out a variety of site-based civil engineering tasks, including pipe laying, drainage, concrete works, and underground chamber construction. Operating plant and equipment such as excavators, dumpers, and rollers safely and effectively. Reading and interpreting drawings and plans to support accurate delivery on site. Ensuring full compliance with health, safety, and environmental procedures at all times. Supporting the timely delivery of projects in line with standards, regulations, and budgets. What are we looking for? This role of Skilled Operative is great for you if you have: Knowledge and experience within the water industry, with skills in pipe laying, drainage, and deep drainage. A valid CSCS or EUSR card, plus a full driving licence. Confined space training (or willingness to undertake it) and tickets in areas such as NPORS Slinger Signaller, COSHH, or Advanced Scaffold Inspection. We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. If you would like to explore more about the incredible growth and scale of our water business, dive into our diverse project portfolios, and uncover both current and future career opportunities. You can see more information about our water business here. There's never been a better time to get involved, register your interest today and take the first step toward a rewarding career with us! Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to We're all about finding potential here at Kier, and transferrable skills are always welcome! So, even if you don't tick every box, please apply and we can have a chat. If you would like to explore more about the incredible growth and scale of our water business, dive into our diverse project portfolios, and uncover both current and future career opportunities. You can see more information about our water business here. There's never been a better time to get involved, register your interest today and take the first step toward a rewarding career with us! Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here. Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here. As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to Matched pension scheme up to 7.5%, Life Assurance, Enhanced Family Friendly Policies, Discounts on go-to brands, Free Heath and wellbeing services, Training and development schemes, Electric Vehicle Leasing, Paid volunteering leave.
Shielding Engineer to design and optimize radiation shielding for the Odin micro-reactor. The role demands the identification and development of cost-effective shielding solutions due to the stringent cost constraints of microreactors, presenting a unique engineering challenge. As part of our dynamic physics team, you will proactively collaborate with scientists and engineers from other disciplines, leveraging your expertise and strong communication skills to influence Odin s design and ensure regulatory compliance in a fast-paced startup environment. Reporting to: Lead Physicist & CEO Job Type: Full-Time (Part-Time would be considered) About Us Cambridge AtomWorks is the design authority for the Odin nuclear micro-reactor and is situated at the heart of the Cambridge innovation ecosystem. We are building a high-calibre, collaborative team of experts in nuclear engineering, materials science, thermal hydraulics, and electricity generation. As we take the company forward, Cambridge AtomWorks will require innovative engineering and manufacturing approaches across these fields to establish itself in emerging energy markets. Key Responsibilities Design cost effective and practical shielding solutions for the Odin microreactor. Assess radiation damage and detector sensitivities. Conduct dose assessments, for the reactor and other sources, e.g. transport flasks. Assess the performance of shielding solutions using deterministic and Monte Carlo methods. Develop and implement robust validation and verification strategy for shielding designs. Produce clear and comprehensive documentation to support design and performance assessments. Review and ensure the quality of shielding work produced by self and peers, maintaining high standards. Ensure compliance of shielding solutions with regulatory requirements. Collaborate with multi-disciplinary teams including engineering, thermal hydraulics, materials and chemistry, safety and licensing. Effectively communicate challenges and solutions to internal teams, regulators, and potential customers. Required Qualifications, Experience and Skills 2:1 or above Bachelor s, or Masters degree in Engineering, Physics or a related field. Familiarity with shielding codes and methods. Strong understanding of radiation shielding physics (e.g., neutron, gamma attenuation). Understanding of shielding design challenges in nuclear applications. Team player who can work in a cross-disciplinary environment. Clear and persuasive communicator with strong documentation skills. Preferred Experience Experience in nuclear industry or related fields (e.g., medical physics, fusion). Understanding of the inner workings of deterministic/Monte Carlo shielding methods. Use of shielding codes (e.g. MCBEND, Atilla) for significant packages of work. Experience in applying uncertainty quantification methods to shielding problems. What We Offer Challenging Work: Contribute to the development of a compact nuclear micro-reactor. Professional Growth: Direct mentorship from leading experts and close relationships with academia and industry. Flexible Work Competitive Benefits: Competitive salary, salary sacrifice pension scheme and 25 days annual leave. Strategic Impact: Be part of a rapidly growing organization shaping the future of the nuclear sector. Please submit your CV and covering letter to by the deadline of noon on 16 September 2025.
Sep 04, 2025
Full time
Shielding Engineer to design and optimize radiation shielding for the Odin micro-reactor. The role demands the identification and development of cost-effective shielding solutions due to the stringent cost constraints of microreactors, presenting a unique engineering challenge. As part of our dynamic physics team, you will proactively collaborate with scientists and engineers from other disciplines, leveraging your expertise and strong communication skills to influence Odin s design and ensure regulatory compliance in a fast-paced startup environment. Reporting to: Lead Physicist & CEO Job Type: Full-Time (Part-Time would be considered) About Us Cambridge AtomWorks is the design authority for the Odin nuclear micro-reactor and is situated at the heart of the Cambridge innovation ecosystem. We are building a high-calibre, collaborative team of experts in nuclear engineering, materials science, thermal hydraulics, and electricity generation. As we take the company forward, Cambridge AtomWorks will require innovative engineering and manufacturing approaches across these fields to establish itself in emerging energy markets. Key Responsibilities Design cost effective and practical shielding solutions for the Odin microreactor. Assess radiation damage and detector sensitivities. Conduct dose assessments, for the reactor and other sources, e.g. transport flasks. Assess the performance of shielding solutions using deterministic and Monte Carlo methods. Develop and implement robust validation and verification strategy for shielding designs. Produce clear and comprehensive documentation to support design and performance assessments. Review and ensure the quality of shielding work produced by self and peers, maintaining high standards. Ensure compliance of shielding solutions with regulatory requirements. Collaborate with multi-disciplinary teams including engineering, thermal hydraulics, materials and chemistry, safety and licensing. Effectively communicate challenges and solutions to internal teams, regulators, and potential customers. Required Qualifications, Experience and Skills 2:1 or above Bachelor s, or Masters degree in Engineering, Physics or a related field. Familiarity with shielding codes and methods. Strong understanding of radiation shielding physics (e.g., neutron, gamma attenuation). Understanding of shielding design challenges in nuclear applications. Team player who can work in a cross-disciplinary environment. Clear and persuasive communicator with strong documentation skills. Preferred Experience Experience in nuclear industry or related fields (e.g., medical physics, fusion). Understanding of the inner workings of deterministic/Monte Carlo shielding methods. Use of shielding codes (e.g. MCBEND, Atilla) for significant packages of work. Experience in applying uncertainty quantification methods to shielding problems. What We Offer Challenging Work: Contribute to the development of a compact nuclear micro-reactor. Professional Growth: Direct mentorship from leading experts and close relationships with academia and industry. Flexible Work Competitive Benefits: Competitive salary, salary sacrifice pension scheme and 25 days annual leave. Strategic Impact: Be part of a rapidly growing organization shaping the future of the nuclear sector. Please submit your CV and covering letter to by the deadline of noon on 16 September 2025.
Job title: Principal Nuclear Safety Engineer Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Deputising for the PNED Build Assurance Manager as Required Supporting or lead Nuclear Safety Engineering activities for the Astute and Dreadnought programme, including resolution of emergent issues during the Build and Commission of the Naval Reactor Plant using application of common Safety Engineering techniques where appropriate Act as the Intelligent Customer for documentation, advice, services concerning the Naval Reactor Plant and safety case provided to the company Developing sound technical solutions to issues arising during construction and commissioning of the Naval Reactor Plant Authoring inputs to the Office of the Chief Engineer advising on the compliance of the "as built" Naval Reactor Plant against design, build and commissioning requirements in support of entry in nuclear build phases Carry out nuclear safety assessment of the impact of changes to, and deviations from, the Naval Reactor Plant design intent Liaising with both internal and external customers as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Your skills and experiences: Essential: Degree level qualification (or equivalent) in a relevant subject such as Engineering of Physical Science Understanding of the design, build, commissioning, and operation of Reactor Plant systems Demonstrable competence of technical report writing Desirable: Engineering experience in design and build of systems, including and understanding of the role that safety and quality play Ability to lead engineering investigations, including Root Cause Analysis The ability to constructively challenge and influence others, whilst putting forward clear, concise and credible reasoning to support judgements Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits. Including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PNED team: This role offers you the opportunity to gain in-depth knowledge of the Naval Reactor Plant for both the Astute Class and Dreadnought Class of submarines. The role also provides a rare opportunity to be involved in a broad range of the Engineering Lifecycle for a Naval Reactor Plant, from Engineering Design Reviews through to build, test and commissioning activities, including but not limited to, resolution of emergent issues providing support to the wider PNED teams. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. LI-GM3 LI-Hybrid
Sep 04, 2025
Full time
Job title: Principal Nuclear Safety Engineer Location: Barrow-In-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Deputising for the PNED Build Assurance Manager as Required Supporting or lead Nuclear Safety Engineering activities for the Astute and Dreadnought programme, including resolution of emergent issues during the Build and Commission of the Naval Reactor Plant using application of common Safety Engineering techniques where appropriate Act as the Intelligent Customer for documentation, advice, services concerning the Naval Reactor Plant and safety case provided to the company Developing sound technical solutions to issues arising during construction and commissioning of the Naval Reactor Plant Authoring inputs to the Office of the Chief Engineer advising on the compliance of the "as built" Naval Reactor Plant against design, build and commissioning requirements in support of entry in nuclear build phases Carry out nuclear safety assessment of the impact of changes to, and deviations from, the Naval Reactor Plant design intent Liaising with both internal and external customers as required ensuring that their requirements are adequately supported and that their needs are fully considered and incorporated where appropriate and agreed Your skills and experiences: Essential: Degree level qualification (or equivalent) in a relevant subject such as Engineering of Physical Science Understanding of the design, build, commissioning, and operation of Reactor Plant systems Demonstrable competence of technical report writing Desirable: Engineering experience in design and build of systems, including and understanding of the role that safety and quality play Ability to lead engineering investigations, including Root Cause Analysis The ability to constructively challenge and influence others, whilst putting forward clear, concise and credible reasoning to support judgements Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits. Including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PNED team: This role offers you the opportunity to gain in-depth knowledge of the Naval Reactor Plant for both the Astute Class and Dreadnought Class of submarines. The role also provides a rare opportunity to be involved in a broad range of the Engineering Lifecycle for a Naval Reactor Plant, from Engineering Design Reviews through to build, test and commissioning activities, including but not limited to, resolution of emergent issues providing support to the wider PNED teams. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. LI-GM3 LI-Hybrid
Fixed Wire Test Engineer - Lancaster area Experience with Electrical Testing and Inspection? Expert at Fixed Wire Testing? Looking for a great career with a market-leading company? Come and be part of our success! Great benefits including uncapped bonus, company vehicle and more! At phs Compliance our business continues to grow, and to support this want experienced Electricians to join our already successful team In return for your commitment and expertise, you'll benefit from: A base salary between £38,000 with average earnings of c. £52,350 (base salary plus bonus, on call, overtime/weekends, and paid travel time). Our bonus is uncapped. 31 days holiday allowance (including statutory bank holidays). Pension. A company vehicle (available for private use as well). Fuel card provided. We cover all parking fees and work-related expenses. Fully maintained vehicle. We provide Laptop, PDA, testing equipment and uniform. phs Perks (Partnership with Reward Gateway). phs Shop ( Discount on household consumables). Discounts with retailers including Vodaphone. Ongoing career development opportunities. A 24 hour wellbeing helpline . The ideal candidate for a Fixed Wire Testing Engineer at phs will have: NVQ level 3 or City & Guilds 2360/2330 part 1 & 2 qualification City & Guilds 18th Edition qualification. City & Guilds 2391/2394 & 2395. AM2 Experience working in an electrical testing environment. The flexibility to work 40 hours per week, including evening / twilight shifts to support our customers' requirements. Travelling to sites across ROI and the flexibility to stop over when required. A full UK Driving Licence, with 6 points or less. IPAF 3a & 3b licence. A good level of IT literacy. Experience with Electrical installation/project work An understanding of UK Health and Safety Regulations within the workplace Your role as a Fixed Wire Testing Engineer: Carrying out Inspecting & Testing on customer's electrical installations (EICR's) including Emergency Lighting Testing, Fire Alarm Inspections, Mains Analysis, Thermal Imaging, and small remedial repairs as required. Completing all relevant reports and certification associated with your inspection & testing our cloud-based certification software. Ensuring all reports and certification are completed and summited on time. About phs: phs Compliance focuses on helping more than 2,000 UK and Irish business customers test, install and manage their property infrastructure assets. PHS Compliance self-delivers electrical test and inspection, M&E installation & maintenance & asset verification with over 400 engineers based nationwide. Our technical and quality management standards are second to none, we are one of a few UK Companies accredited to UKAS 17020 inspection body standards for fixed wire and portable appliance testing. phs Group was founded in 1963 and we are the leading provider for Hygiene Services in the UK, Spain and the Republic of Ireland with over 120,000 customers across 300,000 locations incorporating numerous businesses during its 62 years of business. Our businesses include Washrooms, Healthcare, Floorcare, phs Direct and Direct365, phs Greenleaf, Teacrate, Besafe, Wastekit and Compliance. At phs, we pride ourselves on our diverse workforce, and ensuring we have an inclusive environment for all our staff. We remain committed to ensuring our teams can bring their true selves to work without risk or fear of discrimination. .
Sep 04, 2025
Full time
Fixed Wire Test Engineer - Lancaster area Experience with Electrical Testing and Inspection? Expert at Fixed Wire Testing? Looking for a great career with a market-leading company? Come and be part of our success! Great benefits including uncapped bonus, company vehicle and more! At phs Compliance our business continues to grow, and to support this want experienced Electricians to join our already successful team In return for your commitment and expertise, you'll benefit from: A base salary between £38,000 with average earnings of c. £52,350 (base salary plus bonus, on call, overtime/weekends, and paid travel time). Our bonus is uncapped. 31 days holiday allowance (including statutory bank holidays). Pension. A company vehicle (available for private use as well). Fuel card provided. We cover all parking fees and work-related expenses. Fully maintained vehicle. We provide Laptop, PDA, testing equipment and uniform. phs Perks (Partnership with Reward Gateway). phs Shop ( Discount on household consumables). Discounts with retailers including Vodaphone. Ongoing career development opportunities. A 24 hour wellbeing helpline . The ideal candidate for a Fixed Wire Testing Engineer at phs will have: NVQ level 3 or City & Guilds 2360/2330 part 1 & 2 qualification City & Guilds 18th Edition qualification. City & Guilds 2391/2394 & 2395. AM2 Experience working in an electrical testing environment. The flexibility to work 40 hours per week, including evening / twilight shifts to support our customers' requirements. Travelling to sites across ROI and the flexibility to stop over when required. A full UK Driving Licence, with 6 points or less. IPAF 3a & 3b licence. A good level of IT literacy. Experience with Electrical installation/project work An understanding of UK Health and Safety Regulations within the workplace Your role as a Fixed Wire Testing Engineer: Carrying out Inspecting & Testing on customer's electrical installations (EICR's) including Emergency Lighting Testing, Fire Alarm Inspections, Mains Analysis, Thermal Imaging, and small remedial repairs as required. Completing all relevant reports and certification associated with your inspection & testing our cloud-based certification software. Ensuring all reports and certification are completed and summited on time. About phs: phs Compliance focuses on helping more than 2,000 UK and Irish business customers test, install and manage their property infrastructure assets. PHS Compliance self-delivers electrical test and inspection, M&E installation & maintenance & asset verification with over 400 engineers based nationwide. Our technical and quality management standards are second to none, we are one of a few UK Companies accredited to UKAS 17020 inspection body standards for fixed wire and portable appliance testing. phs Group was founded in 1963 and we are the leading provider for Hygiene Services in the UK, Spain and the Republic of Ireland with over 120,000 customers across 300,000 locations incorporating numerous businesses during its 62 years of business. Our businesses include Washrooms, Healthcare, Floorcare, phs Direct and Direct365, phs Greenleaf, Teacrate, Besafe, Wastekit and Compliance. At phs, we pride ourselves on our diverse workforce, and ensuring we have an inclusive environment for all our staff. We remain committed to ensuring our teams can bring their true selves to work without risk or fear of discrimination. .
Administrator - Wayleave Department Stockton-on-Tees, TS18 3TU Full-Time, Permanent Competitive Salary & Benefits Summary We're looking for an Administrator to join our busy Wayleave Department in Stockton on Tees. This is a fantastic opportunity to be part of a team responsible for managing over 60,000+ landowner consents and delivering high-quality customer service to both internal and external stakeholders. This role offers excellent development potential through a pay-point based framework linked to competence, performance, and experience. You'll be rewarded for continuous improvement and great performance, with full training provided. Some of the key deliverables in this role will include: Responding to customer and landowner enquiries via phone and email. Completing simple legal agreements and processing compensation payments. Conducting landownership and environmental searches. Supporting Wayleave Officers by updating customers and landowners on project progress. Managing workflow tasks and assisting with planning submissions and payment reassessments. What we're looking for: If you're an experienced Administrator with a strong customer service background, excellent organisational skills, and the ability to thrive in a fast-paced environment, this role is for you. Competent in Microsoft Word and Excel Excellent communication and customer service skills Attention to detail, highly organised and analytical Previous customer service experience Ability to handle multiple enquiries efficiently Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Salary Sacrifice EV Car Scheme Pension with a leading provider and employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program (including counselling and legal advice) Flexible benefits including Dental Insurance, Gym Memberships, Travel Insurance, Tax-Free Bikes Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. You will be working as part of a team where we are committed to creating a culture where we treat each other fairly and with respect, recognising everyone as an individual. Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be. inploi flow: 1 posting: eucj category: administration
Sep 04, 2025
Full time
Administrator - Wayleave Department Stockton-on-Tees, TS18 3TU Full-Time, Permanent Competitive Salary & Benefits Summary We're looking for an Administrator to join our busy Wayleave Department in Stockton on Tees. This is a fantastic opportunity to be part of a team responsible for managing over 60,000+ landowner consents and delivering high-quality customer service to both internal and external stakeholders. This role offers excellent development potential through a pay-point based framework linked to competence, performance, and experience. You'll be rewarded for continuous improvement and great performance, with full training provided. Some of the key deliverables in this role will include: Responding to customer and landowner enquiries via phone and email. Completing simple legal agreements and processing compensation payments. Conducting landownership and environmental searches. Supporting Wayleave Officers by updating customers and landowners on project progress. Managing workflow tasks and assisting with planning submissions and payment reassessments. What we're looking for: If you're an experienced Administrator with a strong customer service background, excellent organisational skills, and the ability to thrive in a fast-paced environment, this role is for you. Competent in Microsoft Word and Excel Excellent communication and customer service skills Attention to detail, highly organised and analytical Previous customer service experience Ability to handle multiple enquiries efficiently Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Salary Sacrifice EV Car Scheme Pension with a leading provider and employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program (including counselling and legal advice) Flexible benefits including Dental Insurance, Gym Memberships, Travel Insurance, Tax-Free Bikes Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. You will be working as part of a team where we are committed to creating a culture where we treat each other fairly and with respect, recognising everyone as an individual. Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be. inploi flow: 1 posting: eucj category: administration
Job Title: Assistant Project Manager - Defence Infrastructure Location: Leeds - Hybrid Working Security Clearance Required: Sole UK Nationals Only About the Role A leading global consultancy is seeking Assistant Project Managers to join its growing Defence Infrastructure team in Leeds. This is an excellent opportunity to work on high-profile, complex programmes that support national defence and critical infrastructure. The role offers clear career development pathways, training, and mentorship, all within a collaborative, inclusive, and sustainability-focused environment. As part of the team, you will support the delivery of infrastructure and construction projects across the North of England, working with experienced professionals in a supportive and dynamic environment. Key Responsibilities Assist in the management of infrastructure and construction projects from initiation through to completion Support senior project managers to deliver projects on time, within budget, and to the required quality standards Contribute to contract administration using NEC (preferred), JCT, or FIDIC forms of contract Help coordinate stakeholders and maintain clear project documentation Promote best practices in health and safety, including CDM compliance Attend client meetings, site visits, and support reporting requirements About You 2+ years' experience in a project support or coordination role, ideally within the Defence, Rail, Highways, or Utilities sectors Familiarity with NEC contracts (training will be provided if needed) Strong communication and interpersonal skills Degree qualified in construction, engineering, project management, or related discipline Working towards or interested in pursuing chartership (APM, RICS, ICE, etc.) Proactive, organised, and eager to learn in a fast-paced environment Security Requirements Due to the sensitive nature of the projects, applicants must be Sole UK Nationals and eligible to obtain UK MoD Security Clearance (SC) . Working Arrangements This is a hybrid role with approximately 50% of time spent on client sites or in the Leeds office. Flexibility will depend on business and client needs, with in-person collaboration encouraged to support learning and team integration. Apply Now If you're ready to grow your project management career in the defence sector, contact Charlie Voss at Conrad Consulting on (phone number removed) or (phone number removed) to learn more and apply.
Sep 04, 2025
Full time
Job Title: Assistant Project Manager - Defence Infrastructure Location: Leeds - Hybrid Working Security Clearance Required: Sole UK Nationals Only About the Role A leading global consultancy is seeking Assistant Project Managers to join its growing Defence Infrastructure team in Leeds. This is an excellent opportunity to work on high-profile, complex programmes that support national defence and critical infrastructure. The role offers clear career development pathways, training, and mentorship, all within a collaborative, inclusive, and sustainability-focused environment. As part of the team, you will support the delivery of infrastructure and construction projects across the North of England, working with experienced professionals in a supportive and dynamic environment. Key Responsibilities Assist in the management of infrastructure and construction projects from initiation through to completion Support senior project managers to deliver projects on time, within budget, and to the required quality standards Contribute to contract administration using NEC (preferred), JCT, or FIDIC forms of contract Help coordinate stakeholders and maintain clear project documentation Promote best practices in health and safety, including CDM compliance Attend client meetings, site visits, and support reporting requirements About You 2+ years' experience in a project support or coordination role, ideally within the Defence, Rail, Highways, or Utilities sectors Familiarity with NEC contracts (training will be provided if needed) Strong communication and interpersonal skills Degree qualified in construction, engineering, project management, or related discipline Working towards or interested in pursuing chartership (APM, RICS, ICE, etc.) Proactive, organised, and eager to learn in a fast-paced environment Security Requirements Due to the sensitive nature of the projects, applicants must be Sole UK Nationals and eligible to obtain UK MoD Security Clearance (SC) . Working Arrangements This is a hybrid role with approximately 50% of time spent on client sites or in the Leeds office. Flexibility will depend on business and client needs, with in-person collaboration encouraged to support learning and team integration. Apply Now If you're ready to grow your project management career in the defence sector, contact Charlie Voss at Conrad Consulting on (phone number removed) or (phone number removed) to learn more and apply.
Sellick Partnership
Newcastle Upon Tyne, Tyne And Wear
JavaScript Developer Remote 48k - 55k Sellick Partnership are currently recruiting a versatile JavaScript Developer with strong experience in Vue.js on the front end and Node.js on the backend. The ideal candidate will be comfortable working across the stack to deliver high-quality, scalable web applications. Responsibilities: Develop and maintain responsive front-end applications using Vue.js. Collaborate with designers and backend engineers to create seamless user experiences. Build and optimize RESTful APIs and backend services with Node.js. Write clean, efficient, and maintainable code following best practices. Debug, test, and optimize applications for performance and scalability. Participate in code reviews and contribute to team knowledge sharing. Requirements: Proven experience with JavaScript/TypeScript Strong hands-on experience with Vue.js Backend development experience with Node.js Familiarity with REST APIs, authentication, and databases (SQL/NoSQL). Proficiency with version control (Git) and agile development workflows. Strong problem-solving skills and ability to work collaboratively. If you are open to a conversation about this opportunity, please apply. Sellick Partnership is proud to be an inclusive and accessible recruitment business and we support applications from candidates of all backgrounds and circumstances. Please note, our advertisements use years' experience, hourly rates, and salary levels purely as a guide and we assess applications based on the experience and skills evidenced on the CV. For information on how your personal details may be used by Sellick Partnership, please review our data processing notice on our website.
Sep 04, 2025
Full time
JavaScript Developer Remote 48k - 55k Sellick Partnership are currently recruiting a versatile JavaScript Developer with strong experience in Vue.js on the front end and Node.js on the backend. The ideal candidate will be comfortable working across the stack to deliver high-quality, scalable web applications. Responsibilities: Develop and maintain responsive front-end applications using Vue.js. Collaborate with designers and backend engineers to create seamless user experiences. Build and optimize RESTful APIs and backend services with Node.js. Write clean, efficient, and maintainable code following best practices. Debug, test, and optimize applications for performance and scalability. Participate in code reviews and contribute to team knowledge sharing. Requirements: Proven experience with JavaScript/TypeScript Strong hands-on experience with Vue.js Backend development experience with Node.js Familiarity with REST APIs, authentication, and databases (SQL/NoSQL). Proficiency with version control (Git) and agile development workflows. Strong problem-solving skills and ability to work collaboratively. If you are open to a conversation about this opportunity, please apply. Sellick Partnership is proud to be an inclusive and accessible recruitment business and we support applications from candidates of all backgrounds and circumstances. Please note, our advertisements use years' experience, hourly rates, and salary levels purely as a guide and we assess applications based on the experience and skills evidenced on the CV. For information on how your personal details may be used by Sellick Partnership, please review our data processing notice on our website.
About Us: At Carrier, we are the world leader in healthy, safe, sustainable, and intelligent building and cold chain solutions, with our customers at the heart of everything we do. SLD Pumps & Power, a Carrier company, is one of the UK's leading suppliers of pumps and generator rental equipment. About the role: We are currently recruiting an experienced Service Engineer/Service Technician to join our team at our depot in Walsall. This role is both a depot and field-based role covering operations across the West Midlands. This is an excellent opportunity for a mechanically skilled engineer with diesel engine experience looking to develop their career. What you'll be doing: Service, maintain, and repair pumps, generators, and diesel-powered equipment in both depot and field-based environments. Prepare and inspect equipment at the depot to ensure it is fully operational before deployment. Carry out major overhauls and refurbishments of end-of-life equipment. Diagnose faults and perform repairs to minimise equipment downtime. Collaborate effectively with the service team, hire controller, and foreman to ensure smooth operations. Ensure compliance with Health & Safety regulations and company policies at all times. Maintain a clean and organised working environment, ensuring all equipment meets safety and quality standards. You'll have: Mechanical experience, with working with plant equipment, pumps, generators, and diesel engines. Good working knowledge of EHSQ Relevant qualifications such as NVQ Level 3, an M&E related apprenticeship or equivalent. Full UK Driving licence Our benefits Competitive salary package (Negotiable DOE) Enhanced payments through overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Sep 04, 2025
Full time
About Us: At Carrier, we are the world leader in healthy, safe, sustainable, and intelligent building and cold chain solutions, with our customers at the heart of everything we do. SLD Pumps & Power, a Carrier company, is one of the UK's leading suppliers of pumps and generator rental equipment. About the role: We are currently recruiting an experienced Service Engineer/Service Technician to join our team at our depot in Walsall. This role is both a depot and field-based role covering operations across the West Midlands. This is an excellent opportunity for a mechanically skilled engineer with diesel engine experience looking to develop their career. What you'll be doing: Service, maintain, and repair pumps, generators, and diesel-powered equipment in both depot and field-based environments. Prepare and inspect equipment at the depot to ensure it is fully operational before deployment. Carry out major overhauls and refurbishments of end-of-life equipment. Diagnose faults and perform repairs to minimise equipment downtime. Collaborate effectively with the service team, hire controller, and foreman to ensure smooth operations. Ensure compliance with Health & Safety regulations and company policies at all times. Maintain a clean and organised working environment, ensuring all equipment meets safety and quality standards. You'll have: Mechanical experience, with working with plant equipment, pumps, generators, and diesel engines. Good working knowledge of EHSQ Relevant qualifications such as NVQ Level 3, an M&E related apprenticeship or equivalent. Full UK Driving licence Our benefits Competitive salary package (Negotiable DOE) Enhanced payments through overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Materials Coordinator/Materials Controller Bridgwater Permanent - Full time - Nightshift Competitive Salary & Flexible benefits package with generous uplifts for working nights Summary NG Bailey are proud to be involved in the Hinkley Point C project based in Bridgwater , Somerset . This is the first in a new generation of nuclear power stations in Britain providing zero-carbon electricity for around six million homes. NG Bailey , the UK's leading independent engineering and services business, are a part of the MEH Alliance , a joint venture to deliver the mechanical, electrical and HVAC installation for the project. As part of recent growth on this project, we are looking for Materials Coordinators to support the Material to Site Function by driving and aiding the material reparation and configuration of all outbound material to site, based on the installation plan. This is a full-time permanent position that will be based at logistics sites around Bridgwater, parking will be available onsite. These roles are being recruited to cover a Nightshift. Some of the key deliverables in this role will include: Attend coordination meetings that cover and include procurement/ expediting and warehouse inventory for all MEH Material.? Coordination and communication of materials between material package managers, warehouse teams and construction teams.? Accumulate data from a 16 week lookahead to support the scheduling of deliveries and installation material per the specified material category and / or construction area. Assist with cataloguing identification, Issuing of material and data input to the asset management system. Collaborating with other departments within the organisation, such as planning, Engineering, Logistics, and the Site Wide Teams, to ensure smooth operations and efficient movement, storage, care, and integration of construction materials. Feedback and report to the Materials preparation and Configuration Manager on any potential improvements on process, HS&E and the reporting structure where shortfalls may lie.? Generate and complete forms on the maintenance and disposal of plant, material, and equipment to feedback to management.? Ensure all relevant documentation, records, and reports are organised and readily accessible for audits, inspections, or reference purposes.? What we're looking for: Prior experience of construction procurement or warehouse asset management.? A good understanding of the various material disciplines within the construction industry, standards and expected material handling and storage requirements would be advantageous. Proven track record of material /asset management and general understanding of a quality driven process to ensure lifetime quality records are recorded and maintained throughout out the 'end to end' process.? Strong IT skills with a focus on accurate data input into Asset/Inventory/Maintenance type systems. Previous experience producing and managing reports and documentation to ensure compliance for audits and inspections. Benefits We are able to offer a competitive salary with generous uplift and allowances for working away from home where required. 25 days holiday per annum, plus bank holidays Pension with leading provider and up to 8% employer contribution Private healthcare Discounts Personal development programme Flexible Benefits Please apply with an up to date CV, detailing your salary/package expectations. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. NG Bailey on the Hinkley Point C Project: We are working across both Hinkley Point C units to deliver the infrastructure that will power the station and its operations, creating 1,000 jobs including many specialist engineers. Works include the design and installation of circa 76,000 cables totalling over 3,000km in length; over 180km of cable containment support systems; fire and environmental sealing; design and installation of earthing systems, and specialist packages associated with data acquisition and plant control. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Sep 04, 2025
Full time
Materials Coordinator/Materials Controller Bridgwater Permanent - Full time - Nightshift Competitive Salary & Flexible benefits package with generous uplifts for working nights Summary NG Bailey are proud to be involved in the Hinkley Point C project based in Bridgwater , Somerset . This is the first in a new generation of nuclear power stations in Britain providing zero-carbon electricity for around six million homes. NG Bailey , the UK's leading independent engineering and services business, are a part of the MEH Alliance , a joint venture to deliver the mechanical, electrical and HVAC installation for the project. As part of recent growth on this project, we are looking for Materials Coordinators to support the Material to Site Function by driving and aiding the material reparation and configuration of all outbound material to site, based on the installation plan. This is a full-time permanent position that will be based at logistics sites around Bridgwater, parking will be available onsite. These roles are being recruited to cover a Nightshift. Some of the key deliverables in this role will include: Attend coordination meetings that cover and include procurement/ expediting and warehouse inventory for all MEH Material.? Coordination and communication of materials between material package managers, warehouse teams and construction teams.? Accumulate data from a 16 week lookahead to support the scheduling of deliveries and installation material per the specified material category and / or construction area. Assist with cataloguing identification, Issuing of material and data input to the asset management system. Collaborating with other departments within the organisation, such as planning, Engineering, Logistics, and the Site Wide Teams, to ensure smooth operations and efficient movement, storage, care, and integration of construction materials. Feedback and report to the Materials preparation and Configuration Manager on any potential improvements on process, HS&E and the reporting structure where shortfalls may lie.? Generate and complete forms on the maintenance and disposal of plant, material, and equipment to feedback to management.? Ensure all relevant documentation, records, and reports are organised and readily accessible for audits, inspections, or reference purposes.? What we're looking for: Prior experience of construction procurement or warehouse asset management.? A good understanding of the various material disciplines within the construction industry, standards and expected material handling and storage requirements would be advantageous. Proven track record of material /asset management and general understanding of a quality driven process to ensure lifetime quality records are recorded and maintained throughout out the 'end to end' process.? Strong IT skills with a focus on accurate data input into Asset/Inventory/Maintenance type systems. Previous experience producing and managing reports and documentation to ensure compliance for audits and inspections. Benefits We are able to offer a competitive salary with generous uplift and allowances for working away from home where required. 25 days holiday per annum, plus bank holidays Pension with leading provider and up to 8% employer contribution Private healthcare Discounts Personal development programme Flexible Benefits Please apply with an up to date CV, detailing your salary/package expectations. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. NG Bailey on the Hinkley Point C Project: We are working across both Hinkley Point C units to deliver the infrastructure that will power the station and its operations, creating 1,000 jobs including many specialist engineers. Works include the design and installation of circa 76,000 cables totalling over 3,000km in length; over 180km of cable containment support systems; fire and environmental sealing; design and installation of earthing systems, and specialist packages associated with data acquisition and plant control. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Senior Software Engineer (C++, Perl) Location: Basingstoke, 5 days a week Job Type: Permanent, Full-time Salary: Competitive A new exciting permanent Senior Software Engineer position has become available to lead a software team within the companies Design department. This role is crucial in maintaining and extending world-class design realisation and engraving tools used to create industry-leading banknote designs. You will be hands-on in implementing new features and addressing technical debt, while also coaching and mentoring junior team members. Day-to-Day of the Role: Lead the design and development of quality, simple software using appropriate patterns. Focus relentlessly on user needs, driving incremental delivery of high-value software and addressing areas of risk timely. Work closely across a multi-disciplinary team to ensure cohesive team delivery. Promote knowledge sharing across the team and department, enabling collaborative work on the same codebase. Regularly update your team and colleagues on your work through agile ceremonies and software development life cycle tools (eg, Azure DevOps, Jira). Identify and implement improvements in ways of working, processes, or adoption of new technologies. Proactively identify and mitigate risks associated with the software. Review code authored by colleagues, providing constructive feedback. Provide mentoring and support professional development within the team. Manage priorities to provide swift responses, support investigations, and create fixes during live incidents. Support delivery leads and architecture colleagues in defining technical tasks required to deliver user stories. Take ownership of the continuous improvement of all Design Software processes and procedures. Required Skills & Qualifications: Strong technical understanding and commercial experience with C++ and Perl technologies. Experience in agile team environments and continuous integration settings. Proven ability to design and deliver software solutions that meet user needs. Ability to set up and establish new software projects from scratch, incorporating best practices, build and release processes, and automated testing. Experience leading small teams of software developers for technical delivery. Familiarity with Git or similar source control systems. Desirable: Knowledge of VBA, JavaScript, or creating Photoshop SDKs in C++. Benefits: Competitive salary and job grade. Opportunities for personal training and development. Engage in a collaborative, innovative workplace culture. Comprehensive benefits package aligned with company guidelines and policies. To apply for this Senior Software Engineer position, please submit your CV to be immediately considered.
Sep 04, 2025
Full time
Senior Software Engineer (C++, Perl) Location: Basingstoke, 5 days a week Job Type: Permanent, Full-time Salary: Competitive A new exciting permanent Senior Software Engineer position has become available to lead a software team within the companies Design department. This role is crucial in maintaining and extending world-class design realisation and engraving tools used to create industry-leading banknote designs. You will be hands-on in implementing new features and addressing technical debt, while also coaching and mentoring junior team members. Day-to-Day of the Role: Lead the design and development of quality, simple software using appropriate patterns. Focus relentlessly on user needs, driving incremental delivery of high-value software and addressing areas of risk timely. Work closely across a multi-disciplinary team to ensure cohesive team delivery. Promote knowledge sharing across the team and department, enabling collaborative work on the same codebase. Regularly update your team and colleagues on your work through agile ceremonies and software development life cycle tools (eg, Azure DevOps, Jira). Identify and implement improvements in ways of working, processes, or adoption of new technologies. Proactively identify and mitigate risks associated with the software. Review code authored by colleagues, providing constructive feedback. Provide mentoring and support professional development within the team. Manage priorities to provide swift responses, support investigations, and create fixes during live incidents. Support delivery leads and architecture colleagues in defining technical tasks required to deliver user stories. Take ownership of the continuous improvement of all Design Software processes and procedures. Required Skills & Qualifications: Strong technical understanding and commercial experience with C++ and Perl technologies. Experience in agile team environments and continuous integration settings. Proven ability to design and deliver software solutions that meet user needs. Ability to set up and establish new software projects from scratch, incorporating best practices, build and release processes, and automated testing. Experience leading small teams of software developers for technical delivery. Familiarity with Git or similar source control systems. Desirable: Knowledge of VBA, JavaScript, or creating Photoshop SDKs in C++. Benefits: Competitive salary and job grade. Opportunities for personal training and development. Engage in a collaborative, innovative workplace culture. Comprehensive benefits package aligned with company guidelines and policies. To apply for this Senior Software Engineer position, please submit your CV to be immediately considered.
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market, and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 3,600+ associates, the company's products are sold at key retailers, online and offline, and through distributors around the world . Location: Battersea, London, Hybrid 3 days a week in the office We are looking for a Senior Product Design Engineer, to join our UK NPD team building a new generation of innovative products for our Ninja brand. We thrive on designing great products that delight our customers. Working as part of our London Design Office, you will bring technical substance and inspiration to our creative efforts to deliver credible solutions to the market. What You'll Do: Takes a lead role (independently and in teams) to solve technical issues found in the development of a product. Mentors more junior team members, with potential for line-management if desired. Supports all team members and encourages their efforts. Collaborates to help establish a project's user, design, and functional requirements, deliver robust solutions to satisfy those requirements, then help to validate through testing and building consensus on next steps. Takes overall ownership of designs through conception, CAD execution, prototyping and verification, whilst consistently working at pace & successfully develops team to do the same. Continuously evaluates and improves designs for cost efficiency, manufacturing improvements, increased quality and value to consumers. Applies sound engineering/ product design standards to deliver real solutions. Applies understanding & experience of high-volume manufacturing processes and materials to optimize designs. Communicates effectively and professionally with colleagues. Collaborates seamlessly with our U.S., U.K., and China-based Product Development teams, multi-functional teams, and executive teams to ensure that great ideas make it through to production. What You'll Bring Typically, 5+ years of proven experience in Mechanical/ Electro-Mechanical Engineering environment. Mechanical Design & Analysis - Strong understanding of mechanical systems in high-voltage environments, including material selection, heat dissipation, vibration control, and structural integrity. Electromechanical Systems - Working knowledge of how mechanical components interact with electrical systems, including insulating materials, creepage/clearance distances, and thermal management. CAD - Proficiency in SolidWorks (ideally) or Creo Manufacturing & Materials - Extensive experience in Injection moulding - Understanding of materials suitable for high-voltage applications (PPS / PAGF) High-Voltage Insulation & Safety - Expertise in managing electrical safety risks (dialectic, hi-pot, arcing etc) Risk Assessment & Failure Mode Analysis - Experience in FMEA, DFMEA, and HAZOP to assess risks in high-voltage systems. Testing & Certification Requirements - Understanding of IP ratings, dielectric strength testing, thermal runaway testing, and partial discharge testing. Prototype Development & Testing - Ability to design, build, and test mechanical prototypes in controlled environments. Environmental & Endurance Testing - Familiarity with thermal cycling, humidity, vibration, and impact testing to ensure product reliability. Drawing & Eng Specification - Proficiency 2D drawings & assemblies, BOM management - working GD&T knowledge would be a bonus Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja's Candidate Privacy Notice can be found here: For candidates based in China, please visit: For candidates based in Vietnam, please visit: We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
Sep 04, 2025
Full time
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market, and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 3,600+ associates, the company's products are sold at key retailers, online and offline, and through distributors around the world . Location: Battersea, London, Hybrid 3 days a week in the office We are looking for a Senior Product Design Engineer, to join our UK NPD team building a new generation of innovative products for our Ninja brand. We thrive on designing great products that delight our customers. Working as part of our London Design Office, you will bring technical substance and inspiration to our creative efforts to deliver credible solutions to the market. What You'll Do: Takes a lead role (independently and in teams) to solve technical issues found in the development of a product. Mentors more junior team members, with potential for line-management if desired. Supports all team members and encourages their efforts. Collaborates to help establish a project's user, design, and functional requirements, deliver robust solutions to satisfy those requirements, then help to validate through testing and building consensus on next steps. Takes overall ownership of designs through conception, CAD execution, prototyping and verification, whilst consistently working at pace & successfully develops team to do the same. Continuously evaluates and improves designs for cost efficiency, manufacturing improvements, increased quality and value to consumers. Applies sound engineering/ product design standards to deliver real solutions. Applies understanding & experience of high-volume manufacturing processes and materials to optimize designs. Communicates effectively and professionally with colleagues. Collaborates seamlessly with our U.S., U.K., and China-based Product Development teams, multi-functional teams, and executive teams to ensure that great ideas make it through to production. What You'll Bring Typically, 5+ years of proven experience in Mechanical/ Electro-Mechanical Engineering environment. Mechanical Design & Analysis - Strong understanding of mechanical systems in high-voltage environments, including material selection, heat dissipation, vibration control, and structural integrity. Electromechanical Systems - Working knowledge of how mechanical components interact with electrical systems, including insulating materials, creepage/clearance distances, and thermal management. CAD - Proficiency in SolidWorks (ideally) or Creo Manufacturing & Materials - Extensive experience in Injection moulding - Understanding of materials suitable for high-voltage applications (PPS / PAGF) High-Voltage Insulation & Safety - Expertise in managing electrical safety risks (dialectic, hi-pot, arcing etc) Risk Assessment & Failure Mode Analysis - Experience in FMEA, DFMEA, and HAZOP to assess risks in high-voltage systems. Testing & Certification Requirements - Understanding of IP ratings, dielectric strength testing, thermal runaway testing, and partial discharge testing. Prototype Development & Testing - Ability to design, build, and test mechanical prototypes in controlled environments. Environmental & Endurance Testing - Familiarity with thermal cycling, humidity, vibration, and impact testing to ensure product reliability. Drawing & Eng Specification - Proficiency 2D drawings & assemblies, BOM management - working GD&T knowledge would be a bonus Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja's Candidate Privacy Notice can be found here: For candidates based in China, please visit: For candidates based in Vietnam, please visit: We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
A sector-leading manufacturer of complex engineered components supplied to the aerospace, defence, and high technology industries is seeking a Lead Engineer to join their team. You will play a pivotal role in defining technical requirements, developing manufacturing processes, designing new machinery & tooling and ensuring successful New Product Introduction. Key Responsibilities Manage a team of Engineers proving guidance, direction and coaching. Develop existing and new tooling designs manufacturing methods to improve efficiency and product quality. Investigate non-conformances with a view to establishing the root cause and implementing changes. Provide subject matter expertise to the customer and develop solid long-term relationships. Define, manage, and validate product requirements and acceptance criteria. Be the company customer point for NPI & manufacturing programs. Produce Engineering drawings. Work closely with multi-disciplinary teams, stakeholders, and external partners to drive system design, development, and delivery. Ensure adherence to safety, environmental, and regulatory standards throughout the engineering lifecycle. The Person Degree or equivalent qualification in a STEM-related discipline. A good understanding of precision engineering processes (machining preferred but not essential). The ability to lead mechanical design work packages. Previous experience working in a highly regulated sector (aerospace and/or defence preferred). Demonstrable experience in applying mechanical engineering for various products along with different stages of a product lifecycle. Experience in using Solidworks or other 3D modelling software. Strong communication skills, both written and verbal with the ability to influence across the business.
Sep 04, 2025
Full time
A sector-leading manufacturer of complex engineered components supplied to the aerospace, defence, and high technology industries is seeking a Lead Engineer to join their team. You will play a pivotal role in defining technical requirements, developing manufacturing processes, designing new machinery & tooling and ensuring successful New Product Introduction. Key Responsibilities Manage a team of Engineers proving guidance, direction and coaching. Develop existing and new tooling designs manufacturing methods to improve efficiency and product quality. Investigate non-conformances with a view to establishing the root cause and implementing changes. Provide subject matter expertise to the customer and develop solid long-term relationships. Define, manage, and validate product requirements and acceptance criteria. Be the company customer point for NPI & manufacturing programs. Produce Engineering drawings. Work closely with multi-disciplinary teams, stakeholders, and external partners to drive system design, development, and delivery. Ensure adherence to safety, environmental, and regulatory standards throughout the engineering lifecycle. The Person Degree or equivalent qualification in a STEM-related discipline. A good understanding of precision engineering processes (machining preferred but not essential). The ability to lead mechanical design work packages. Previous experience working in a highly regulated sector (aerospace and/or defence preferred). Demonstrable experience in applying mechanical engineering for various products along with different stages of a product lifecycle. Experience in using Solidworks or other 3D modelling software. Strong communication skills, both written and verbal with the ability to influence across the business.
Plater / Welder Location: Shrewsbury, Shropshire Pay Rate: £14 - £15 / Per Hour Working Hours: Monday to Thursday: 07:30 - 16:30 Friday: 07:30 - 12:30 Overtime is available and would be expected when required. An exciting opportunity has arisen for a skilled Plater / Welder to join our Dynamic Client. If you are a motivated individual with a keen eye for detail and a passion for welding, we want to hear from you! Key Responsibilities: Read, interpret, and work to engineering drawings with minimal supervision. Work on one-off pieces and other small batch work. Use measuring equipment accurately. Perform work in accordance with the company's health and safety procedures. Maintain a clean and orderly workplace. Requirements: Proven experience as a Plater / Welder. Ability to read and interpret engineering drawings. Proficiency in using measuring equipment. Strong attention to detail and commitment to quality. Highly motivated and able to work independently. Benefits: Competitive hourly rate based on skill level and experience. Overtime opportunities. Supportive and dynamic work environment. Opportunities for professional growth and development. If you are a skilled Plater / Welder looking for a new challenge, apply now at Hunters 4 Staff. We look forward to hearing from you! INDTEMP
Sep 04, 2025
Contractor
Plater / Welder Location: Shrewsbury, Shropshire Pay Rate: £14 - £15 / Per Hour Working Hours: Monday to Thursday: 07:30 - 16:30 Friday: 07:30 - 12:30 Overtime is available and would be expected when required. An exciting opportunity has arisen for a skilled Plater / Welder to join our Dynamic Client. If you are a motivated individual with a keen eye for detail and a passion for welding, we want to hear from you! Key Responsibilities: Read, interpret, and work to engineering drawings with minimal supervision. Work on one-off pieces and other small batch work. Use measuring equipment accurately. Perform work in accordance with the company's health and safety procedures. Maintain a clean and orderly workplace. Requirements: Proven experience as a Plater / Welder. Ability to read and interpret engineering drawings. Proficiency in using measuring equipment. Strong attention to detail and commitment to quality. Highly motivated and able to work independently. Benefits: Competitive hourly rate based on skill level and experience. Overtime opportunities. Supportive and dynamic work environment. Opportunities for professional growth and development. If you are a skilled Plater / Welder looking for a new challenge, apply now at Hunters 4 Staff. We look forward to hearing from you! INDTEMP
