Workshop HGV Technician Vehicle Management Unit - 4 on 4 off Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU
Sep 04, 2025
Full time
Workshop HGV Technician Vehicle Management Unit - 4 on 4 off Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU
Telesales Executive - Part-Time Location: Heckmondwike, WF16 Salary: 27,000 - 29,000 per annum (pro rata, dependent on experience) On-Target Earnings (OTE): Up to 35,000, based on appointment generation ( 10 per appointment, uncapped and with no threshold) Working Hours: Monday to Friday, 10am - 2:00pm Benefits: On-site parking Work Location: In-person A leading provider in the electrical inspection, testing, and installation industry is seeking an experienced Telesales Executive to support the development of a new department focused on appointment generation and lead sourcing. This is a key role in driving business growth and supporting our Business Development Manager (BDM) with high-quality leads. We are expanding rapidly, and this position offers genuine scope for career progression into a BDM role for the right candidate. Key Responsibilities: Generate qualified appointments through outbound calling Source and nurture leads for the Business Development Manager Engage with professionals such as maintenance teams, engineers, health & safety officers, facilities managers, and compliance personnel Maintain accurate records of customer interactions Meet and exceed performance targets Essential Skills and Attributes: Proven telesales experience (required) Confident and articulate communicator Patient and empathetic approach Positive attitude and self-motivation Strong focus and attention to detail Excellent interpersonal skills Team-oriented mindset Resilient and hard-working Friendly and professional manner If you are looking for a rewarding challenge and the opportunity to join one of the fastest-growing companies in the industry, we would be delighted to hear from you. Apply now to become part of a supportive and ambitious team. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Sep 04, 2025
Full time
Telesales Executive - Part-Time Location: Heckmondwike, WF16 Salary: 27,000 - 29,000 per annum (pro rata, dependent on experience) On-Target Earnings (OTE): Up to 35,000, based on appointment generation ( 10 per appointment, uncapped and with no threshold) Working Hours: Monday to Friday, 10am - 2:00pm Benefits: On-site parking Work Location: In-person A leading provider in the electrical inspection, testing, and installation industry is seeking an experienced Telesales Executive to support the development of a new department focused on appointment generation and lead sourcing. This is a key role in driving business growth and supporting our Business Development Manager (BDM) with high-quality leads. We are expanding rapidly, and this position offers genuine scope for career progression into a BDM role for the right candidate. Key Responsibilities: Generate qualified appointments through outbound calling Source and nurture leads for the Business Development Manager Engage with professionals such as maintenance teams, engineers, health & safety officers, facilities managers, and compliance personnel Maintain accurate records of customer interactions Meet and exceed performance targets Essential Skills and Attributes: Proven telesales experience (required) Confident and articulate communicator Patient and empathetic approach Positive attitude and self-motivation Strong focus and attention to detail Excellent interpersonal skills Team-oriented mindset Resilient and hard-working Friendly and professional manner If you are looking for a rewarding challenge and the opportunity to join one of the fastest-growing companies in the industry, we would be delighted to hear from you. Apply now to become part of a supportive and ambitious team. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Job Title: Lighting Measurement Engineer Location: Crewe - Fully On-site Contract: Until 23/12/2025 (with scope to extend) Are you passionate about automotive lighting and photometry? Do you thrive in an innovative environment where your expertise can shine? Our client is seeking a dynamic Lighting Measurement Engineer to join their Exterior Lighting Team. This is an exciting opportunity to work on cutting-edge automotive lighting components! Main Purpose of the Job: As a Lighting Measurement Engineer, you will be responsible for measuring light sources in both vehicle and lab settings. Your role will involve producing detailed test reports on performance, maintaining dark room and light tunnel facilities, and ensuring calibration for all measurement equipment. Key Responsibilities: Measurement of Lighting Components: Conduct photometric measurements on all lighting components, both in-lab and in-vehicle. Report Generation: Create and compile comprehensive test summaries and detailed reports. Calibration Management: Maintain and plan equipment calibration and audits, ensuring accurate measurement capabilities. Facility Maintenance: Oversee the upkeep of dark room facilities, ensuring a safe and efficient working environment. Cross-Functional Collaboration: Work closely with feature owners, suppliers, and various internal departments to communicate measurement results and analyses. Position in organisation: You will be part of the innovative Exterior Lighting Team, reporting directly to the Technical Manager and collaborating with the Head of Exterior Lighting. Your role will involve high levels of communication across departments, ensuring seamless coordination and prioritisation of measurement processes. Qualifications & Experience: Education: Minimum HND in Electrical/Electronics; mechanical qualifications with relevant experience may also be considered. Technical Skills: Proficiency with photometric and optical measurement tools such as Goniometers, Spectrometers, and Imaging Colorimeters. Experience: Knowledge of measuring lamps, switch panels, and display illumination, including headlamps, tail lamps, interior lights, and ambient lighting. Technical Proficiency: Ability to read technical drawings, write clear reports, and understand electrical circuit diagrams and vehicle communication networks (CAN and LIN). Software Skills: Familiarity with Microsoft Office Suite (Word, PowerPoint, Excel) and experience in CAD environments. Additional Requirements: A proactive approach to collaboration and problem-solving. Commitment to local Health and Safety policies to ensure personal and team safety. Willingness to travel occasionally around UK. Please be advised if you haven't heard from us within 48 hours then unfortunately your application has not been successful on this occasion, we may however keep your details on file for any suitable future vacancies and contact you accordingly. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
Sep 04, 2025
Contractor
Job Title: Lighting Measurement Engineer Location: Crewe - Fully On-site Contract: Until 23/12/2025 (with scope to extend) Are you passionate about automotive lighting and photometry? Do you thrive in an innovative environment where your expertise can shine? Our client is seeking a dynamic Lighting Measurement Engineer to join their Exterior Lighting Team. This is an exciting opportunity to work on cutting-edge automotive lighting components! Main Purpose of the Job: As a Lighting Measurement Engineer, you will be responsible for measuring light sources in both vehicle and lab settings. Your role will involve producing detailed test reports on performance, maintaining dark room and light tunnel facilities, and ensuring calibration for all measurement equipment. Key Responsibilities: Measurement of Lighting Components: Conduct photometric measurements on all lighting components, both in-lab and in-vehicle. Report Generation: Create and compile comprehensive test summaries and detailed reports. Calibration Management: Maintain and plan equipment calibration and audits, ensuring accurate measurement capabilities. Facility Maintenance: Oversee the upkeep of dark room facilities, ensuring a safe and efficient working environment. Cross-Functional Collaboration: Work closely with feature owners, suppliers, and various internal departments to communicate measurement results and analyses. Position in organisation: You will be part of the innovative Exterior Lighting Team, reporting directly to the Technical Manager and collaborating with the Head of Exterior Lighting. Your role will involve high levels of communication across departments, ensuring seamless coordination and prioritisation of measurement processes. Qualifications & Experience: Education: Minimum HND in Electrical/Electronics; mechanical qualifications with relevant experience may also be considered. Technical Skills: Proficiency with photometric and optical measurement tools such as Goniometers, Spectrometers, and Imaging Colorimeters. Experience: Knowledge of measuring lamps, switch panels, and display illumination, including headlamps, tail lamps, interior lights, and ambient lighting. Technical Proficiency: Ability to read technical drawings, write clear reports, and understand electrical circuit diagrams and vehicle communication networks (CAN and LIN). Software Skills: Familiarity with Microsoft Office Suite (Word, PowerPoint, Excel) and experience in CAD environments. Additional Requirements: A proactive approach to collaboration and problem-solving. Commitment to local Health and Safety policies to ensure personal and team safety. Willingness to travel occasionally around UK. Please be advised if you haven't heard from us within 48 hours then unfortunately your application has not been successful on this occasion, we may however keep your details on file for any suitable future vacancies and contact you accordingly. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
Adecco is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Simulation Engineer Crewe Contract until 23/12/2025 (12 Month rolling contract) Day Rate Outside IR35 Purpose of the job Adecco working in partnership with Bentley Motors are seeking a Simulation Engineer to support engineers and feature owners, to create virtual models of vehicles and lighting components for simulation. Complete Analysis and reports of results and findings. Prepare demonstrations to show how the lighting in and around the vehicle will behave. Position in organisation Light Simulation Engineer part of the Light Simulation & Photometry Team EE/L, within Electrical Engineering Department. Reporting to the Technical Manager and the Head of Lighting. Scope of Job 1: Simulation Model Creation 2: Running and Analysing Simulations 3: Generation of Simulation Reports 4: Maintaining Materials library 5: Development of Simulation Techniques 6: Cross Functional Communication Key Responsibilities Customer Simulation Requirements Receipt and acknowledgement of Simulation request. Verification of customer requirements and Measurement Specifications. Management of customer requirements & Expectations and deadlines Communication / information sharing & packaging reviews with Research and developments teams, including Electrical, Concepts, Styling & Design, Trim, and other major interfaces Data preparation and Model Creation & Simulation Launch Preparation and cleaning of 3D data. Application of physically correct materials Creation of sensors & implementation of design tables Mesh adjustment Launching Simulations and use of HPC Use of active simulation for design Data Analysis, Report & Demonstration Compilation Detailed Analysis of Simulation Results, Including but not exhaustive Occupant Vision and Visual Ergonomics Lighting Concept strategy Interior Lighting (Internal reflections, Sunlight effects, core functional lighting, Ambient lighting, stowage lighting, Displays HUD, Cube simulations) Exterior Lighting (Front and rear lighting experience and performance. Impacts to customers and environment lit and unlit) Lighting effects Legal verification Vehicle benchmarking Root cause analysis of Errors and defects discovered Implications or impact introduced by the system / components into interfacing systems i.e. Interior Trim or BiW must be identified with potential solutions Identification of any packaging constraints & style hard points Scripting & Macro Creation Creation and Compilation of test summaries and of comprehensive & detailed test reports. Support Feature owners, Suppliers, and internal customers with understanding measurement results and analysis. Demonstration presentation of Simulation results Maintenance and Customer support Maintain material measurement library. Maintain process documentation for simulation methods/techniques Correlation of simulation results to real world situation Support customers understanding of simulation methods and techniques Experience Experience and knowledge of delivering complete vehicle optical simulation and vehicle integration of illuminated components with ergonomic eye point considerations on the interior & exterior of the vehicle. Excellent knowledge is required of: Catia v5, Softwares: Speos for Catia Ansys Speos AVX (awareness) Prita MS Office (including scripting in Visual basic) Detailed Analysis of simulation results Complete Vehicle component integration Good understanding of materials and behaviour with light Other Requirements Reading Technical Drawings. Ability to write clear technical reports Understanding of electrical circuit diagrams, behaviour and control of LEDs and system integration onto vehicles. Data management and revision control Appreciation of vehicle communication networks including CAN and LIN communication buses. Working to quality standards and processes Experience with Microsoft office programs including word, power point and excel Note - if you do not hear back within 5 working days of applying, please assume you have been unsuccessful on this occasion
Sep 04, 2025
Contractor
Adecco is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Simulation Engineer Crewe Contract until 23/12/2025 (12 Month rolling contract) Day Rate Outside IR35 Purpose of the job Adecco working in partnership with Bentley Motors are seeking a Simulation Engineer to support engineers and feature owners, to create virtual models of vehicles and lighting components for simulation. Complete Analysis and reports of results and findings. Prepare demonstrations to show how the lighting in and around the vehicle will behave. Position in organisation Light Simulation Engineer part of the Light Simulation & Photometry Team EE/L, within Electrical Engineering Department. Reporting to the Technical Manager and the Head of Lighting. Scope of Job 1: Simulation Model Creation 2: Running and Analysing Simulations 3: Generation of Simulation Reports 4: Maintaining Materials library 5: Development of Simulation Techniques 6: Cross Functional Communication Key Responsibilities Customer Simulation Requirements Receipt and acknowledgement of Simulation request. Verification of customer requirements and Measurement Specifications. Management of customer requirements & Expectations and deadlines Communication / information sharing & packaging reviews with Research and developments teams, including Electrical, Concepts, Styling & Design, Trim, and other major interfaces Data preparation and Model Creation & Simulation Launch Preparation and cleaning of 3D data. Application of physically correct materials Creation of sensors & implementation of design tables Mesh adjustment Launching Simulations and use of HPC Use of active simulation for design Data Analysis, Report & Demonstration Compilation Detailed Analysis of Simulation Results, Including but not exhaustive Occupant Vision and Visual Ergonomics Lighting Concept strategy Interior Lighting (Internal reflections, Sunlight effects, core functional lighting, Ambient lighting, stowage lighting, Displays HUD, Cube simulations) Exterior Lighting (Front and rear lighting experience and performance. Impacts to customers and environment lit and unlit) Lighting effects Legal verification Vehicle benchmarking Root cause analysis of Errors and defects discovered Implications or impact introduced by the system / components into interfacing systems i.e. Interior Trim or BiW must be identified with potential solutions Identification of any packaging constraints & style hard points Scripting & Macro Creation Creation and Compilation of test summaries and of comprehensive & detailed test reports. Support Feature owners, Suppliers, and internal customers with understanding measurement results and analysis. Demonstration presentation of Simulation results Maintenance and Customer support Maintain material measurement library. Maintain process documentation for simulation methods/techniques Correlation of simulation results to real world situation Support customers understanding of simulation methods and techniques Experience Experience and knowledge of delivering complete vehicle optical simulation and vehicle integration of illuminated components with ergonomic eye point considerations on the interior & exterior of the vehicle. Excellent knowledge is required of: Catia v5, Softwares: Speos for Catia Ansys Speos AVX (awareness) Prita MS Office (including scripting in Visual basic) Detailed Analysis of simulation results Complete Vehicle component integration Good understanding of materials and behaviour with light Other Requirements Reading Technical Drawings. Ability to write clear technical reports Understanding of electrical circuit diagrams, behaviour and control of LEDs and system integration onto vehicles. Data management and revision control Appreciation of vehicle communication networks including CAN and LIN communication buses. Working to quality standards and processes Experience with Microsoft office programs including word, power point and excel Note - if you do not hear back within 5 working days of applying, please assume you have been unsuccessful on this occasion
Satellite AIT EGSE Engineer Location: Stevenage (full time on site) Duration: 6 months Rate: £33.64 per hour PAYE or £45 per hour Umbrella The successful candidate will be responsible for specifying EGSE and overseeing procurement as well as day to day support of the electrical test racks used during spacecraft build and test. The job includes validation and routine maintenance as well as configuring, maintaining, and administering the computers on the EGSE network. Responsibilities Maintenance and fault finding of electronic/RF test racks. Computer system and networks administration. Programming and scripting languages. Environmental and launch test campaign. Preparing test specifications for test racks, reviewing data packs from suppliers, and supporting reviews of test equipment design and non-conformances. Proven Ability / Key Skills Essential Good theoretical and practical knowledge of electronic and RF test racks. Fault finding skills down to board and component level. Network and computer administration in Windows and Linux environments. Good documentation skills (procedures, reports etc.). Knowledge of interfaces such as Mil-1553, SpaceWire, CAN bus, RS232/422 etc. ATE environments such as PCI, VXI, PXI etc. Competent in the use of a variety of general-purpose lab test equipment. Knowledge of test systems. Design, manufacture, and commissioning of test systems. Willing to support shifts and travel overseas on test campaigns as required. Desirable Knowledge of electrical integration of equipment on a spacecraft. Working knowledge of TMTC Databases. Writing test sequences/scripts for execution of spacecraft systems tests including FDIR from the Central Checkout System (CCS). Knowledge of environmental and launch test campaigns. Familiar with the Windows and Linux operating systems. Programming and scripting languages, in particularly writing and debugging Linux/Unix bash scripts is an advantage. Knowledge of a programming language such as C, Java, python, TCL, VBA Additional Please note, due to the sensitive nature of the project involved all applicants must be capable of gaining a UK MOD Security Clearance to SC level.
Sep 04, 2025
Contractor
Satellite AIT EGSE Engineer Location: Stevenage (full time on site) Duration: 6 months Rate: £33.64 per hour PAYE or £45 per hour Umbrella The successful candidate will be responsible for specifying EGSE and overseeing procurement as well as day to day support of the electrical test racks used during spacecraft build and test. The job includes validation and routine maintenance as well as configuring, maintaining, and administering the computers on the EGSE network. Responsibilities Maintenance and fault finding of electronic/RF test racks. Computer system and networks administration. Programming and scripting languages. Environmental and launch test campaign. Preparing test specifications for test racks, reviewing data packs from suppliers, and supporting reviews of test equipment design and non-conformances. Proven Ability / Key Skills Essential Good theoretical and practical knowledge of electronic and RF test racks. Fault finding skills down to board and component level. Network and computer administration in Windows and Linux environments. Good documentation skills (procedures, reports etc.). Knowledge of interfaces such as Mil-1553, SpaceWire, CAN bus, RS232/422 etc. ATE environments such as PCI, VXI, PXI etc. Competent in the use of a variety of general-purpose lab test equipment. Knowledge of test systems. Design, manufacture, and commissioning of test systems. Willing to support shifts and travel overseas on test campaigns as required. Desirable Knowledge of electrical integration of equipment on a spacecraft. Working knowledge of TMTC Databases. Writing test sequences/scripts for execution of spacecraft systems tests including FDIR from the Central Checkout System (CCS). Knowledge of environmental and launch test campaigns. Familiar with the Windows and Linux operating systems. Programming and scripting languages, in particularly writing and debugging Linux/Unix bash scripts is an advantage. Knowledge of a programming language such as C, Java, python, TCL, VBA Additional Please note, due to the sensitive nature of the project involved all applicants must be capable of gaining a UK MOD Security Clearance to SC level.
Location: Stevenage (On site) Department: Spacecraft Build & Test Contract Type: 6 Months (Likely to be extended) Hourly Rate: 45p/h Inside IR35 Role Overview The EGSE Engineer is responsible for specifying, procuring, and supporting electrical test racks used during spacecraft build and test activities. This includes validation, routine maintenance, and the configuration and administration of computers within the EGSE network. Key Responsibilities Perform maintenance and fault diagnosis on electronic and RF test racks. Administer computer systems and networks across Windows and Linux platforms. Develop and maintain scripts and programs to support automated testing. Participate in environmental and launch test campaigns. Prepare test specifications, review supplier documentation, and support design and non-conformance reviews of test equipment. Essential Skills & Qualifications Degree in Electrical Engineering or a related discipline, or equivalent experience (minimum 5 years). Strong theoretical and practical understanding of electronic and RF test systems. Proven fault-finding skills down to board and component level. Experience in network and computer administration (Windows/Linux). Proficient in producing technical documentation (procedures, reports, specifications). Familiarity with communication interfaces such as MIL-STD-1553, SpaceWire, CAN bus, RS232/422. Experience with ATE environments including PCI, VXI, PXI. Skilled in using general-purpose laboratory test equipment. Experience in the design, manufacture, and commissioning of test systems. Willingness to support shift work and travel internationally for test campaigns. Desirable Skills Experience in electrical integration of spacecraft equipment. Working knowledge of TMTC databases. Ability to write and debug test sequences/scripts for spacecraft systems, including FDIR via Central Checkout Systems (CCS). Experience with environmental and launch test campaigns. Advanced scripting skills, particularly in Linux/Unix bash. Programming experience in languages such as C, Java, Python, TCL, VBA. This vacancy is being advertised by Belcan
Sep 04, 2025
Contractor
Location: Stevenage (On site) Department: Spacecraft Build & Test Contract Type: 6 Months (Likely to be extended) Hourly Rate: 45p/h Inside IR35 Role Overview The EGSE Engineer is responsible for specifying, procuring, and supporting electrical test racks used during spacecraft build and test activities. This includes validation, routine maintenance, and the configuration and administration of computers within the EGSE network. Key Responsibilities Perform maintenance and fault diagnosis on electronic and RF test racks. Administer computer systems and networks across Windows and Linux platforms. Develop and maintain scripts and programs to support automated testing. Participate in environmental and launch test campaigns. Prepare test specifications, review supplier documentation, and support design and non-conformance reviews of test equipment. Essential Skills & Qualifications Degree in Electrical Engineering or a related discipline, or equivalent experience (minimum 5 years). Strong theoretical and practical understanding of electronic and RF test systems. Proven fault-finding skills down to board and component level. Experience in network and computer administration (Windows/Linux). Proficient in producing technical documentation (procedures, reports, specifications). Familiarity with communication interfaces such as MIL-STD-1553, SpaceWire, CAN bus, RS232/422. Experience with ATE environments including PCI, VXI, PXI. Skilled in using general-purpose laboratory test equipment. Experience in the design, manufacture, and commissioning of test systems. Willingness to support shift work and travel internationally for test campaigns. Desirable Skills Experience in electrical integration of spacecraft equipment. Working knowledge of TMTC databases. Ability to write and debug test sequences/scripts for spacecraft systems, including FDIR via Central Checkout Systems (CCS). Experience with environmental and launch test campaigns. Advanced scripting skills, particularly in Linux/Unix bash. Programming experience in languages such as C, Java, Python, TCL, VBA. This vacancy is being advertised by Belcan
My client is seeking an engineer looking for an opportunity to enhance their experience and apply the skills they have to service and maintain their coffee machines within the Midlands. This role will require you to have a mechanical understanding of machines and a clean UK driving licence as this is Field Based. Experience of working a Field role is not necessary. My clients business has been around for 50+ years and has been designing, manufacturing, maintaining and distributing coffee machines independently to some of the most recognised and well known business' in Britain and around the world. With this experience they have confidently tailored to their customer's every needs, resulting to attracting clients all over the world, and supplying to almost 100 countries to date. What You'll Be Doing: Carrying out diagnostic repairs ensuring all equipment is left in perfect working order. Carrying out preventative maintenance and yearly PVIs on steam boilers (Training will be provided). Attend customer sites within agreed SLAs and complete brand standard checks Provide technical support when installing new coffee machines on site and/ or follow up Support on maintained equipment. Liaise with the inhouse team when needed. Respect and maintain all company tools, equipment, and vehicle to the highest standards, reporting anything deemed unsafe to use. Be a fantastic and approachable individual when dealing with our clients face to face or via other communication methods. What We Are Looking For From You: Employment history maintaining machines (Vending and Barista equipment desirable). Strong problem-solving skills with an electrical/mechanical background. A positive and enthusiastic individual with a genuine passion for working with machines in a customer facing environment. Computer literacy and clean UK driving licence. Please note: Applicants will only be considered if they meet the starting criteria - Have UK experience working as a Maintenance Engineer for a UK employer - Have Full British Rights to work only. - Visas of any sort or requirement of sponsorship before 2031 will not be considered. - Are a UK resident and have proof of this. - Have a UK Clean driving licence.
Sep 04, 2025
Full time
My client is seeking an engineer looking for an opportunity to enhance their experience and apply the skills they have to service and maintain their coffee machines within the Midlands. This role will require you to have a mechanical understanding of machines and a clean UK driving licence as this is Field Based. Experience of working a Field role is not necessary. My clients business has been around for 50+ years and has been designing, manufacturing, maintaining and distributing coffee machines independently to some of the most recognised and well known business' in Britain and around the world. With this experience they have confidently tailored to their customer's every needs, resulting to attracting clients all over the world, and supplying to almost 100 countries to date. What You'll Be Doing: Carrying out diagnostic repairs ensuring all equipment is left in perfect working order. Carrying out preventative maintenance and yearly PVIs on steam boilers (Training will be provided). Attend customer sites within agreed SLAs and complete brand standard checks Provide technical support when installing new coffee machines on site and/ or follow up Support on maintained equipment. Liaise with the inhouse team when needed. Respect and maintain all company tools, equipment, and vehicle to the highest standards, reporting anything deemed unsafe to use. Be a fantastic and approachable individual when dealing with our clients face to face or via other communication methods. What We Are Looking For From You: Employment history maintaining machines (Vending and Barista equipment desirable). Strong problem-solving skills with an electrical/mechanical background. A positive and enthusiastic individual with a genuine passion for working with machines in a customer facing environment. Computer literacy and clean UK driving licence. Please note: Applicants will only be considered if they meet the starting criteria - Have UK experience working as a Maintenance Engineer for a UK employer - Have Full British Rights to work only. - Visas of any sort or requirement of sponsorship before 2031 will not be considered. - Are a UK resident and have proof of this. - Have a UK Clean driving licence.
Job Title: Security Systems Engineer Location: Hinkley Point - Somerset Pay Range/details: £45,000 per annum Contract Type: Permanent Omega are supporting with an exciting opportunity for a Security Systems Engineer to join a new site-based engineering team at Hinkley Point in Somerset. The project will involve working with world-class enterprise electronic security systems and is suitable for experienced candidates as well as those with a solid foundation in electronic security systems and a strong desire to advance their skills and knowledge. Key Responsibilities Security Systems Engineer Attend to reactive fault calls as directed by the team coordinators and/or Senior Site Engineer, with rectification of fault on first visit being a critical KPI. Carry out a rolling programme of preventative maintenance as scheduled by the team coordinators and/or Senior Site Engineer. Carry out additional installation and commissioning works as directed by team coordinators and/or Senior Site Engineer. Assist Senior Site Engineer and Technical Lead in the pre-production test environment before release into the live environment. Assist the Design Team in conducting surveys around the site for additional works. Accurate collection and recording of site hardware and software configuration information in conjunction with the CAD Engineer. Assist the site-based Health and Safety Lead and Project Director in ensuring audits are carried out for quality procedures. In conjunction with the Senior Site Engineer and Health & Safety Manager, to assist in the production of Risk Assessments, Method Statements and other documentation as required to gain Permits to Work promptly Proactively interact with other site-based teams, build a good rapport, and ensure the smooth flow of information to enable the efficient operation of the site. Work in absolute compliance with all site procedures and embrace the customer s Zero Harm to People and the Environment mantra. Qualifications & Requirements Security Systems Engineer A minimum of 5 years of experience installing and/or servicing a broad product base within the electronic security industry typically Access. Control, CCTV and Intruder alarm systems. Broad IT knowledge, e.g., software installation into Windows Operating Systems, IP-based systems and networking principles. Knowledge of basic electrical principles such as measuring voltage, resistance and current. A basic understanding of electrical components, such as relays and resistors. Attention to detail is crucial to ensure that all paperwork is completed correctly and procedures are followed within the allotted timeframes. An enthusiastic team player who can work well under pressure and always maintain a professional approach. Comfortable working irregular hours and being on a 24/7 call rota. 5-year checkable employment history & Right to work in the UK/EU unrestricted. What we can offer Security Systems Engineer Great pension. 25 days holiday, plus 8 bank holidays. Life assurance scheme. Extensive further product and H&S training. Perks at work scheme. Career progression. For more information on this role, please contact Michael Farrell on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a Security Systems Engineer, Security Engineer, Systems Engineer or a Fire & Security Engineer may be suitable for this position. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 04, 2025
Full time
Job Title: Security Systems Engineer Location: Hinkley Point - Somerset Pay Range/details: £45,000 per annum Contract Type: Permanent Omega are supporting with an exciting opportunity for a Security Systems Engineer to join a new site-based engineering team at Hinkley Point in Somerset. The project will involve working with world-class enterprise electronic security systems and is suitable for experienced candidates as well as those with a solid foundation in electronic security systems and a strong desire to advance their skills and knowledge. Key Responsibilities Security Systems Engineer Attend to reactive fault calls as directed by the team coordinators and/or Senior Site Engineer, with rectification of fault on first visit being a critical KPI. Carry out a rolling programme of preventative maintenance as scheduled by the team coordinators and/or Senior Site Engineer. Carry out additional installation and commissioning works as directed by team coordinators and/or Senior Site Engineer. Assist Senior Site Engineer and Technical Lead in the pre-production test environment before release into the live environment. Assist the Design Team in conducting surveys around the site for additional works. Accurate collection and recording of site hardware and software configuration information in conjunction with the CAD Engineer. Assist the site-based Health and Safety Lead and Project Director in ensuring audits are carried out for quality procedures. In conjunction with the Senior Site Engineer and Health & Safety Manager, to assist in the production of Risk Assessments, Method Statements and other documentation as required to gain Permits to Work promptly Proactively interact with other site-based teams, build a good rapport, and ensure the smooth flow of information to enable the efficient operation of the site. Work in absolute compliance with all site procedures and embrace the customer s Zero Harm to People and the Environment mantra. Qualifications & Requirements Security Systems Engineer A minimum of 5 years of experience installing and/or servicing a broad product base within the electronic security industry typically Access. Control, CCTV and Intruder alarm systems. Broad IT knowledge, e.g., software installation into Windows Operating Systems, IP-based systems and networking principles. Knowledge of basic electrical principles such as measuring voltage, resistance and current. A basic understanding of electrical components, such as relays and resistors. Attention to detail is crucial to ensure that all paperwork is completed correctly and procedures are followed within the allotted timeframes. An enthusiastic team player who can work well under pressure and always maintain a professional approach. Comfortable working irregular hours and being on a 24/7 call rota. 5-year checkable employment history & Right to work in the UK/EU unrestricted. What we can offer Security Systems Engineer Great pension. 25 days holiday, plus 8 bank holidays. Life assurance scheme. Extensive further product and H&S training. Perks at work scheme. Career progression. For more information on this role, please contact Michael Farrell on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a Security Systems Engineer, Security Engineer, Systems Engineer or a Fire & Security Engineer may be suitable for this position. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Site Automation Engineer Runcorn Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: - Inverter drives - Programmable safety systems - PLCs - Servo drives -SCADA system - Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 04, 2025
Full time
Site Automation Engineer Runcorn Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: - Inverter drives - Programmable safety systems - PLCs - Servo drives -SCADA system - Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Electrical Maintenance Engineer Commercial Environment Permanent Role 40-42,000 + Employment Package & Company Vehicle Upavon, Wiltshire. Due to increased workload, we are actively recruiting for an Electrical Maintenance Engineer to join our maintenance team on a static basis on a large commercial site based in Upavon, Wilshire. Your role will be involve working as part of a large team carrying out planned and reactive maintenance of electrical building services equipment. Role Summary: Job Title: Electrical Maintenance Engineer Location: Upavon, Wilshire Static role with company vehicle provided. Base Salary: 40,000 - 42,000 dependant on qualifications and experience. Hours: 08:00am - 5:00pm (site based). Package: 33 days paid annual leave including 8 bank holidays, company van provided, fuel card, free on-site parking, company funded training courses and up-skilling , company contribution to pension, income protection scheme, private healthcare plan etc. Duties / Works: As an Electrical Maintenance Engineer, your scope of works will be as follows: Planned preventative maintenance (PPM), reactive maintenance and remedial works across a commercial environment / commercial systems. Equipment may include; lamps/ ballasts, lighting upgrades, emergency lighting, decorative and security lighting, sockets, circuits, wiring, cabling, power distribution, transformers, induction motors, power supplies to HVAC / Mechanical / Building Services systems, electrical components within HVAC / Mechanical / Building Services systems. Updating site log-books and company CAFM system, providing detailed reports of works etc. Requirements: As an Electrical Maintenance Engineer, we expect you to meet the following requirements: Must be a fully qualified Electrician (City & Guilds 2360 Part 2 / City & Guilds 2330 Level 3 / NVQ Level 3 or equivalent). Must hold testing and inspection qualifications (City & Guilds 2391) Up to date regulations: 18th edition. Experience within a commercial maintenance role previously. Must be able to gain SC Security Clearance due to the nature of the environment. Must have a UK driving license with under 9 points. Desirable but not essential: JIB Gold Status - Electrical Installer. EV Charger install experience CompEx 01-04 If you are a fully qualified Electrician and are interested in this Electrical Maintenance Engineer position in Upavon then please apply today by submitting a full CV.
Sep 04, 2025
Full time
Electrical Maintenance Engineer Commercial Environment Permanent Role 40-42,000 + Employment Package & Company Vehicle Upavon, Wiltshire. Due to increased workload, we are actively recruiting for an Electrical Maintenance Engineer to join our maintenance team on a static basis on a large commercial site based in Upavon, Wilshire. Your role will be involve working as part of a large team carrying out planned and reactive maintenance of electrical building services equipment. Role Summary: Job Title: Electrical Maintenance Engineer Location: Upavon, Wilshire Static role with company vehicle provided. Base Salary: 40,000 - 42,000 dependant on qualifications and experience. Hours: 08:00am - 5:00pm (site based). Package: 33 days paid annual leave including 8 bank holidays, company van provided, fuel card, free on-site parking, company funded training courses and up-skilling , company contribution to pension, income protection scheme, private healthcare plan etc. Duties / Works: As an Electrical Maintenance Engineer, your scope of works will be as follows: Planned preventative maintenance (PPM), reactive maintenance and remedial works across a commercial environment / commercial systems. Equipment may include; lamps/ ballasts, lighting upgrades, emergency lighting, decorative and security lighting, sockets, circuits, wiring, cabling, power distribution, transformers, induction motors, power supplies to HVAC / Mechanical / Building Services systems, electrical components within HVAC / Mechanical / Building Services systems. Updating site log-books and company CAFM system, providing detailed reports of works etc. Requirements: As an Electrical Maintenance Engineer, we expect you to meet the following requirements: Must be a fully qualified Electrician (City & Guilds 2360 Part 2 / City & Guilds 2330 Level 3 / NVQ Level 3 or equivalent). Must hold testing and inspection qualifications (City & Guilds 2391) Up to date regulations: 18th edition. Experience within a commercial maintenance role previously. Must be able to gain SC Security Clearance due to the nature of the environment. Must have a UK driving license with under 9 points. Desirable but not essential: JIB Gold Status - Electrical Installer. EV Charger install experience CompEx 01-04 If you are a fully qualified Electrician and are interested in this Electrical Maintenance Engineer position in Upavon then please apply today by submitting a full CV.
Leading North West based building services company. They have an enviable reputation for the reliable delivery of cost and energy efficient building management, operational and technical solutions for businesses of all shapes and sizes - from retail parks to leisure complexes, educational establishments and commercial properties. Job purpose We are looking for an experienced Gas Engineer to join their team. Being able to work in a variety of buildings, carrying out Pre Planned Maintenance on HVAC systems as well as reactive and emergency breakdown tasks. Main duties and responsibilities Working in a variety of buildings throughout the region Carrying out Reactive and emergency breakdown tasks and complete the associated paperwork Carrying out Planned Preventative Maintenance on various systems and complete the appropriate paperwork and reports. Working on Pumps, Air Handling Units, pressurisation units Experience Excellent understanding of Commercial Heating Systems Experience in all aspects of commercial gas, servicing, repairs and installs Excellent knowledge of current gas regulations Possess comprehensive technical skills to fault find and rectify Good controls knowledge Good plumbing skills Knowledge of BMS Systems Have a flexible approach to work Be prepared to work out of hours when required and be part of the out of hours call out rota (1 in 14) Basic Electrical Safety Knowledge Experience Minimum 5 years' experience in a similar role Requirements/knbowledge Able to use own initiative. Commercial gas qualification's Domestic gas (preferred but not essential) Knowledge of Health & Safety and safe working practices Capable of completing essential paperwork in accurate and timely manner Unvented hot water 18th Edition (preferred ) Oil ( desirable ) Benefits Overtime is available. Rates will be disused at interview. Company Car/Van which can be used for personal use. You will also receive a fuel card Continued development support 23 days holidays, plus the 8 days bank holidays. Holidays increases to 25 days after 5 years of service Company Sick Pay Scheme Regular company socials 5.7% employer Pension Contribution Free car parking (on some sites) 150 float Trade Card 750 staff referral scheme Birthday voucher Employee of the month voucher Please contact David Recruitment on (phone number removed) for further details
Sep 04, 2025
Full time
Leading North West based building services company. They have an enviable reputation for the reliable delivery of cost and energy efficient building management, operational and technical solutions for businesses of all shapes and sizes - from retail parks to leisure complexes, educational establishments and commercial properties. Job purpose We are looking for an experienced Gas Engineer to join their team. Being able to work in a variety of buildings, carrying out Pre Planned Maintenance on HVAC systems as well as reactive and emergency breakdown tasks. Main duties and responsibilities Working in a variety of buildings throughout the region Carrying out Reactive and emergency breakdown tasks and complete the associated paperwork Carrying out Planned Preventative Maintenance on various systems and complete the appropriate paperwork and reports. Working on Pumps, Air Handling Units, pressurisation units Experience Excellent understanding of Commercial Heating Systems Experience in all aspects of commercial gas, servicing, repairs and installs Excellent knowledge of current gas regulations Possess comprehensive technical skills to fault find and rectify Good controls knowledge Good plumbing skills Knowledge of BMS Systems Have a flexible approach to work Be prepared to work out of hours when required and be part of the out of hours call out rota (1 in 14) Basic Electrical Safety Knowledge Experience Minimum 5 years' experience in a similar role Requirements/knbowledge Able to use own initiative. Commercial gas qualification's Domestic gas (preferred but not essential) Knowledge of Health & Safety and safe working practices Capable of completing essential paperwork in accurate and timely manner Unvented hot water 18th Edition (preferred ) Oil ( desirable ) Benefits Overtime is available. Rates will be disused at interview. Company Car/Van which can be used for personal use. You will also receive a fuel card Continued development support 23 days holidays, plus the 8 days bank holidays. Holidays increases to 25 days after 5 years of service Company Sick Pay Scheme Regular company socials 5.7% employer Pension Contribution Free car parking (on some sites) 150 float Trade Card 750 staff referral scheme Birthday voucher Employee of the month voucher Please contact David Recruitment on (phone number removed) for further details
D R Newitt & Associates
Nottingham, Nottinghamshire
5 x Multi-Skilled Engineer (Electrical / Mechanical) Shifts: 4 on 4 off pattern, 2 Days and 2 Nights Salary: £48k - £50K ASAP Start 5x Brand New Roles - Leading Food Manufacture Why Join? One of the UK s leading food manufacturers, we provide ample opportunities for career growth and skill development. We emphasise promoting from within, ensuring you can build a rewarding career with us. About the Role We are looking for a 5 x Multi-skilled Maintenance Engineer with a mechanical background. This role involves intricate mechanical work, primarily conducted when the factory isn t running. The work is split 50/50 between reactive and planned maintenance. About You The ideal candidate will have experience within planned maintenance and will have worked in the food production industry. We are seeking someone who can be flexible, has a can-do attitude and is able to hit the ground running with minimal supervision. Key Responsibilities: • Fixing rollers, small gearboxes, and small motors • Planning maintenance work for the weekend shifts on Monday and Tuesday • Supporting with machinery breakdowns as needed • Ensuring smooth operations across both sites Key Skills/Qualifications: • Hands-on experience with minimum NVQ Level 3 in Mechanical Engineering • Experienced in planned and reactive maintenance • Strong mechanical skills and ideally some electrical knowledge and experience • Experience in manufacturing and food production • Welding skills and experience would be ideal For further details please contact Scott Ballantine at D R Newitt Recruitment
Sep 04, 2025
Full time
5 x Multi-Skilled Engineer (Electrical / Mechanical) Shifts: 4 on 4 off pattern, 2 Days and 2 Nights Salary: £48k - £50K ASAP Start 5x Brand New Roles - Leading Food Manufacture Why Join? One of the UK s leading food manufacturers, we provide ample opportunities for career growth and skill development. We emphasise promoting from within, ensuring you can build a rewarding career with us. About the Role We are looking for a 5 x Multi-skilled Maintenance Engineer with a mechanical background. This role involves intricate mechanical work, primarily conducted when the factory isn t running. The work is split 50/50 between reactive and planned maintenance. About You The ideal candidate will have experience within planned maintenance and will have worked in the food production industry. We are seeking someone who can be flexible, has a can-do attitude and is able to hit the ground running with minimal supervision. Key Responsibilities: • Fixing rollers, small gearboxes, and small motors • Planning maintenance work for the weekend shifts on Monday and Tuesday • Supporting with machinery breakdowns as needed • Ensuring smooth operations across both sites Key Skills/Qualifications: • Hands-on experience with minimum NVQ Level 3 in Mechanical Engineering • Experienced in planned and reactive maintenance • Strong mechanical skills and ideally some electrical knowledge and experience • Experience in manufacturing and food production • Welding skills and experience would be ideal For further details please contact Scott Ballantine at D R Newitt Recruitment
Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. Are you ready to shape the future of noise and acoustics for Data Centres projects across Europe? If you're an acoustics expert ready to lead, innovate, and make a real impact then please read on. Black & White Engineering is hiring a Senior Acoustics Engineer to pioneer a brand-new department focused on external noise control for data centres, if you haven't worked on data centre projects previously then you will be able to use your previous experience of complex commercial building projects. This isn't just another engineering role. You'll be at the forefront of designing solutions that meet global noise regulations, using industry-standard tools like SoundPLAN and CadnaA. From modelling layouts to advising on acoustic louvres and perimeter walls, your work will directly influence how major data centre projects come to life. What's in it for you? Build and lead your team, not just in UK but also in our offices in Manila. Fast-track to Principal or Director-level Collaborate with top-tier clients and consultants Be the go-to expert in a niche, high-impact field Work from our offices in Manchester, Edinburgh, or Newcastle - no London commute! We operate a 3 days per week in office hybrid working model. In addition, you will be joining a community that focuses on learning and development through regular lunch and learn sessions, investment in accredited professional courses or educational programmes. you can set the pace for your professional development, and whatever path you choose, you will receive relevant support. Essential skills: Previous relevant experience in building acoustic modelling and design Collaborative approach to innovative solutions Able to gain the best from the team around you and recognising their achievements. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Ready to take the lead? Apply now and let's build something extraordinary together.
Sep 04, 2025
Full time
Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. Are you ready to shape the future of noise and acoustics for Data Centres projects across Europe? If you're an acoustics expert ready to lead, innovate, and make a real impact then please read on. Black & White Engineering is hiring a Senior Acoustics Engineer to pioneer a brand-new department focused on external noise control for data centres, if you haven't worked on data centre projects previously then you will be able to use your previous experience of complex commercial building projects. This isn't just another engineering role. You'll be at the forefront of designing solutions that meet global noise regulations, using industry-standard tools like SoundPLAN and CadnaA. From modelling layouts to advising on acoustic louvres and perimeter walls, your work will directly influence how major data centre projects come to life. What's in it for you? Build and lead your team, not just in UK but also in our offices in Manila. Fast-track to Principal or Director-level Collaborate with top-tier clients and consultants Be the go-to expert in a niche, high-impact field Work from our offices in Manchester, Edinburgh, or Newcastle - no London commute! We operate a 3 days per week in office hybrid working model. In addition, you will be joining a community that focuses on learning and development through regular lunch and learn sessions, investment in accredited professional courses or educational programmes. you can set the pace for your professional development, and whatever path you choose, you will receive relevant support. Essential skills: Previous relevant experience in building acoustic modelling and design Collaborative approach to innovative solutions Able to gain the best from the team around you and recognising their achievements. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Ready to take the lead? Apply now and let's build something extraordinary together.
Multi Trader Responsibilities: Perform a variety of trade tasks including carpentry, plumbing, tiling, painting, plastering, and basic electrical work Carry out planned and reactive maintenance Maintain accurate records of work completed and materials used Liaise with the client and contracts manager to ensure completion of work Multi Trader Requirements: Proven experience as a Multi Trader Blue CSCS Card Relevant trade qualifications Excellent problem-solving skills and attention to detail About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance and engineering companies. TAGS:/MULTITRADER/MULTI/CARPENTERMULTI/HANDYMAN/HANDYPERSON/CARPENTER/PLUMBER/PLASTERER/MULTITRADE/PORTSMOUTH/SOUTHSEA/PO1/PO2
Sep 04, 2025
Full time
Multi Trader Responsibilities: Perform a variety of trade tasks including carpentry, plumbing, tiling, painting, plastering, and basic electrical work Carry out planned and reactive maintenance Maintain accurate records of work completed and materials used Liaise with the client and contracts manager to ensure completion of work Multi Trader Requirements: Proven experience as a Multi Trader Blue CSCS Card Relevant trade qualifications Excellent problem-solving skills and attention to detail About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance and engineering companies. TAGS:/MULTITRADER/MULTI/CARPENTERMULTI/HANDYMAN/HANDYPERSON/CARPENTER/PLUMBER/PLASTERER/MULTITRADE/PORTSMOUTH/SOUTHSEA/PO1/PO2
Site Automation Engineer Warrington Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: Inverter drives Programmable safety systems PLCs Servo drives SCADA system Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 04, 2025
Full time
Site Automation Engineer Warrington Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: Inverter drives Programmable safety systems PLCs Servo drives SCADA system Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Job Opportunity: Maintenance Operative Location: Leeds Contract Type: Temporary to Permanent Are you passionate about delivering exceptional customer service? Do you have a knack for hands-on maintenance and a keen eye for detail? If so, we have the perfect role for you! Join our dynamic team as a Maintenance Operative and help us create a welcoming and well-maintained environment for our residents. About Us We are a leading property organisation with over 35 years of experience in providing bespoke, luxury accommodations across the UK. With 14 operational student accommodation schemes in 10 major cities and an impressive £1.6bn of upcoming developments, we take pride in our commitment to quality and service. Key Responsibilities: As a Maintenance Operative, you will: Deliver outstanding customer service by promptly addressing maintenance requests and repairs. Monitor and liaise with onsite contractors to ensure tasks are completed efficiently. Conduct daily reactive and preventative maintenance activities. Perform planned maintenance checks including fire alarms, emergency lighting, and health & safety inspections. Undertake regular building patrols to identify and address maintenance or safety concerns. Conduct scheduled flat inspections and execute all necessary actions swiftly. Maintain accurate records of maintenance issues and ensure compliance with safety regulations. Keep Property Documentation Files up to date and organised. Adhere to Health & Safety policies, ensuring all work is carried out safely and effectively. Interact with students professionally, showing empathy and understanding regarding their living environment. Report any welfare issues to management immediately. Key Requirements: To excel in this role, you should: Take ownership of your responsibilities and take pride in your work. Have a solid understanding of Health & Safety legislation and its application. Hold a relevant qualification in plumbing, joinery, or electrical systems (preferred). Have prior experience in domestic electrical, plumbing, or general maintenance. Possess intermediate skills in business operating systems, including Microsoft Word, Excel, and Outlook. Demonstrate effective communication skills, both written and verbal. Be able to prioritise your workload and work collaboratively within a team. Working Hours: Monday to Friday: 8am to 5pm or 9am to 6pm on a rotating basis. 1 in 4 Saturdays: 8am to 5pm on a rota'd shift basis. Opportunity for overtime during summer turnover for student check-in/check-out. Benefits: Join us and enjoy: Competitive salary 25 days of holiday plus bank holidays Paid overtime Pension scheme Life Assurance cover Employee assistance scheme Why Join Us? If you're ready to make a difference and contribute to a thriving community, we want to hear from you! This is more than just a job; it's an opportunity to be part of a team that values quality, support, and a vibrant living experience. Apply Now! Don't miss out on this exciting opportunity to become a key player in our organisation. Submit your application today and take the first step towards a rewarding career as a Maintenance Operative! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Sep 04, 2025
Full time
Job Opportunity: Maintenance Operative Location: Leeds Contract Type: Temporary to Permanent Are you passionate about delivering exceptional customer service? Do you have a knack for hands-on maintenance and a keen eye for detail? If so, we have the perfect role for you! Join our dynamic team as a Maintenance Operative and help us create a welcoming and well-maintained environment for our residents. About Us We are a leading property organisation with over 35 years of experience in providing bespoke, luxury accommodations across the UK. With 14 operational student accommodation schemes in 10 major cities and an impressive £1.6bn of upcoming developments, we take pride in our commitment to quality and service. Key Responsibilities: As a Maintenance Operative, you will: Deliver outstanding customer service by promptly addressing maintenance requests and repairs. Monitor and liaise with onsite contractors to ensure tasks are completed efficiently. Conduct daily reactive and preventative maintenance activities. Perform planned maintenance checks including fire alarms, emergency lighting, and health & safety inspections. Undertake regular building patrols to identify and address maintenance or safety concerns. Conduct scheduled flat inspections and execute all necessary actions swiftly. Maintain accurate records of maintenance issues and ensure compliance with safety regulations. Keep Property Documentation Files up to date and organised. Adhere to Health & Safety policies, ensuring all work is carried out safely and effectively. Interact with students professionally, showing empathy and understanding regarding their living environment. Report any welfare issues to management immediately. Key Requirements: To excel in this role, you should: Take ownership of your responsibilities and take pride in your work. Have a solid understanding of Health & Safety legislation and its application. Hold a relevant qualification in plumbing, joinery, or electrical systems (preferred). Have prior experience in domestic electrical, plumbing, or general maintenance. Possess intermediate skills in business operating systems, including Microsoft Word, Excel, and Outlook. Demonstrate effective communication skills, both written and verbal. Be able to prioritise your workload and work collaboratively within a team. Working Hours: Monday to Friday: 8am to 5pm or 9am to 6pm on a rotating basis. 1 in 4 Saturdays: 8am to 5pm on a rota'd shift basis. Opportunity for overtime during summer turnover for student check-in/check-out. Benefits: Join us and enjoy: Competitive salary 25 days of holiday plus bank holidays Paid overtime Pension scheme Life Assurance cover Employee assistance scheme Why Join Us? If you're ready to make a difference and contribute to a thriving community, we want to hear from you! This is more than just a job; it's an opportunity to be part of a team that values quality, support, and a vibrant living experience. Apply Now! Don't miss out on this exciting opportunity to become a key player in our organisation. Submit your application today and take the first step towards a rewarding career as a Maintenance Operative! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. Are you ready to shape the future of noise and acoustics for Data Centres projects across Europe? If you're an acoustics expert ready to lead, innovate, and make a real impact then please read on. Black & White Engineering is hiring a Senior Acoustics Engineer to pioneer a brand-new department focused on external noise control for data centres, if you haven't worked on data centre projects previously then you will be able to use your previous experience of complex commercial building projects. This isn't just another engineering role. You'll be at the forefront of designing solutions that meet global noise regulations, using industry-standard tools like SoundPLAN and CadnaA. From modelling layouts to advising on acoustic louvres and perimeter walls, your work will directly influence how major data centre projects come to life. What's in it for you? Build and lead your team, not just in UK but also in our offices in Manila. Fast-track to Principal or Director-level Collaborate with top-tier clients and consultants Be the go-to expert in a niche, high-impact field Work from our offices in Manchester, Edinburgh, or Newcastle - no London commute! We operate a 3 days per week in office hybrid working model. In addition, you will be joining a community that focuses on learning and development through regular lunch and learn sessions, investment in accredited professional courses or educational programmes. you can set the pace for your professional development, and whatever path you choose, you will receive relevant support. Essential skills: Previous relevant experience in building acoustic modelling and design Collaborative approach to innovative solutions Able to gain the best from the team around you and recognising their achievements. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Ready to take the lead? Apply now and let's build something extraordinary together.
Sep 04, 2025
Full time
Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. Are you ready to shape the future of noise and acoustics for Data Centres projects across Europe? If you're an acoustics expert ready to lead, innovate, and make a real impact then please read on. Black & White Engineering is hiring a Senior Acoustics Engineer to pioneer a brand-new department focused on external noise control for data centres, if you haven't worked on data centre projects previously then you will be able to use your previous experience of complex commercial building projects. This isn't just another engineering role. You'll be at the forefront of designing solutions that meet global noise regulations, using industry-standard tools like SoundPLAN and CadnaA. From modelling layouts to advising on acoustic louvres and perimeter walls, your work will directly influence how major data centre projects come to life. What's in it for you? Build and lead your team, not just in UK but also in our offices in Manila. Fast-track to Principal or Director-level Collaborate with top-tier clients and consultants Be the go-to expert in a niche, high-impact field Work from our offices in Manchester, Edinburgh, or Newcastle - no London commute! We operate a 3 days per week in office hybrid working model. In addition, you will be joining a community that focuses on learning and development through regular lunch and learn sessions, investment in accredited professional courses or educational programmes. you can set the pace for your professional development, and whatever path you choose, you will receive relevant support. Essential skills: Previous relevant experience in building acoustic modelling and design Collaborative approach to innovative solutions Able to gain the best from the team around you and recognising their achievements. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Ready to take the lead? Apply now and let's build something extraordinary together.
The Thrive Team Limited
Newcastle Upon Tyne, Tyne And Wear
An opportunity to join an exciting organisation as a Software Engineer. In the current day environment innovation in the military plays a key role and our R&D team sits in the heart of it. The team's primary responsibility is to pioneer the approaches of military robotics and autonomous systems and their machine learning (ML) components. The team is involved in the full life cycle of the project. They work closely with other leading military robotics companies and customers all over the world. To support the R&D Team, you will work with colleagues in developing and validating novel systems and software architecture for RAS implementation. You will work on developing software for our current and future products. The work can range from working on controls of RAS payloads, vehicle automation, image processing, sensor integration, digital twin integration, simulation development, algorithm testing and data analysis. You will enhance the development of the products drawing from your experience and that of your colleagues. You will have the opportunity to meet global end-users and work with them to trial your solutions in real world environments, test them on real applications and get your hands dirty, and this might be on the other side of the world. Main Duties & Responsibilities: Intergrate software components into a fully functional software system. Write clean, maintainable, and scalable code, utilizing modern software engineering practices and tools. Contribute significantly to the engineering lifecycle, including scoping, design, implementation, testing, deployment and maintenance of your team's work Collaborate with cross-functional teams to integrate software with hardware components. Participating in design reviews providing technical input through the development process. Coaching team members to improve capabilities and develop their software knowledge/expertise. Troubleshoot and resolve complex technical issues. Stay informed on current trends in the software development field and M-RAS and proactively explore their implementation within the company Qualifications, skills and experience: A degree in Software Engineering, Computer Science, Physics or Maths with a grade of at least a 2:1 or an equivalent qualification and experience. Proven experience in relevant industry that will complement and enhance RAS development Experience with Linux and developing real-time software in C/C++ or Python is essential. Experience of robotics, machine control systems and automation is desirable. A basic understanding of electronics and the ability to read electrical schematics is essential. Demonstrable knowledge and experience of current software engineering practices for RAS. Experience with ROS/ROS2, machine learning and OpenCV is advantageous. Knowledge of CODESYS or similar PLC software is beneficial. Experience working in a multi-disciplined engineering team. Ability to investigate and interpret data, issues, and situations, to make sound decisions in high-stress situations. Appetite for learning new technologies and applications. Ability to communicate complex procedures to colleagues. Self-motivating, proactive and results driven approach. Collaborative ethos is essential Competitive remuneration package offered which includes a generous annual bonus scheme. Working in a modern and spacious facility you will have access to exciting projects within a growing organisation. If you feel that you have the necessary skills and experience, we would like to hear from you.
Sep 04, 2025
Full time
An opportunity to join an exciting organisation as a Software Engineer. In the current day environment innovation in the military plays a key role and our R&D team sits in the heart of it. The team's primary responsibility is to pioneer the approaches of military robotics and autonomous systems and their machine learning (ML) components. The team is involved in the full life cycle of the project. They work closely with other leading military robotics companies and customers all over the world. To support the R&D Team, you will work with colleagues in developing and validating novel systems and software architecture for RAS implementation. You will work on developing software for our current and future products. The work can range from working on controls of RAS payloads, vehicle automation, image processing, sensor integration, digital twin integration, simulation development, algorithm testing and data analysis. You will enhance the development of the products drawing from your experience and that of your colleagues. You will have the opportunity to meet global end-users and work with them to trial your solutions in real world environments, test them on real applications and get your hands dirty, and this might be on the other side of the world. Main Duties & Responsibilities: Intergrate software components into a fully functional software system. Write clean, maintainable, and scalable code, utilizing modern software engineering practices and tools. Contribute significantly to the engineering lifecycle, including scoping, design, implementation, testing, deployment and maintenance of your team's work Collaborate with cross-functional teams to integrate software with hardware components. Participating in design reviews providing technical input through the development process. Coaching team members to improve capabilities and develop their software knowledge/expertise. Troubleshoot and resolve complex technical issues. Stay informed on current trends in the software development field and M-RAS and proactively explore their implementation within the company Qualifications, skills and experience: A degree in Software Engineering, Computer Science, Physics or Maths with a grade of at least a 2:1 or an equivalent qualification and experience. Proven experience in relevant industry that will complement and enhance RAS development Experience with Linux and developing real-time software in C/C++ or Python is essential. Experience of robotics, machine control systems and automation is desirable. A basic understanding of electronics and the ability to read electrical schematics is essential. Demonstrable knowledge and experience of current software engineering practices for RAS. Experience with ROS/ROS2, machine learning and OpenCV is advantageous. Knowledge of CODESYS or similar PLC software is beneficial. Experience working in a multi-disciplined engineering team. Ability to investigate and interpret data, issues, and situations, to make sound decisions in high-stress situations. Appetite for learning new technologies and applications. Ability to communicate complex procedures to colleagues. Self-motivating, proactive and results driven approach. Collaborative ethos is essential Competitive remuneration package offered which includes a generous annual bonus scheme. Working in a modern and spacious facility you will have access to exciting projects within a growing organisation. If you feel that you have the necessary skills and experience, we would like to hear from you.
REED Talent Solutions
Newcastle Upon Tyne, Tyne And Wear
Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. Are you ready to shape the future of noise and acoustics for Data Centres projects across Europe? If you're an acoustics expert ready to lead, innovate, and make a real impact then please read on. Black & White Engineering is hiring a Senior Acoustics Engineer to pioneer a brand-new department focused on external noise control for data centres, if you haven't worked on data centre projects previously then you will be able to use your previous experience of complex commercial building projects. This isn't just another engineering role. You'll be at the forefront of designing solutions that meet global noise regulations, using industry-standard tools like SoundPLAN and CadnaA. From modelling layouts to advising on acoustic louvres and perimeter walls, your work will directly influence how major data centre projects come to life. What's in it for you? Build and lead your team, not just in UK but also in our offices in Manila. Fast-track to Principal or Director-level Collaborate with top-tier clients and consultants Be the go-to expert in a niche, high-impact field Work from our offices in Manchester, Edinburgh, or Newcastle - no London commute! We operate a 3 days per week in office hybrid working model. In addition, you will be joining a community that focuses on learning and development through regular lunch and learn sessions, investment in accredited professional courses or educational programmes. you can set the pace for your professional development, and whatever path you choose, you will receive relevant support. Essential skills: Previous relevant experience in building acoustic modelling and design Collaborative approach to innovative solutions Able to gain the best from the team around you and recognising their achievements. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Ready to take the lead? Apply now and let's build something extraordinary together.
Sep 04, 2025
Full time
Black & White Engineering is a multi-award-winning engineering consultancy, with nearly 900 employees in teams based in our UK, European, Middle East and Asia Pacific offices. We have been providing a wide range of Mechanical, Electrical and Plumbing (MEP) engineering consultancy services since 2007 and are now expanding our Civil and Structural Engineering division. Our engineering expertise reaches across all sectors of the construction industry, providing pragmatic and practical design solutions to ensure our projects are spatially and operationally efficient. Our design process fully considers the installation and maintenance practicalities on site. Are you ready to shape the future of noise and acoustics for Data Centres projects across Europe? If you're an acoustics expert ready to lead, innovate, and make a real impact then please read on. Black & White Engineering is hiring a Senior Acoustics Engineer to pioneer a brand-new department focused on external noise control for data centres, if you haven't worked on data centre projects previously then you will be able to use your previous experience of complex commercial building projects. This isn't just another engineering role. You'll be at the forefront of designing solutions that meet global noise regulations, using industry-standard tools like SoundPLAN and CadnaA. From modelling layouts to advising on acoustic louvres and perimeter walls, your work will directly influence how major data centre projects come to life. What's in it for you? Build and lead your team, not just in UK but also in our offices in Manila. Fast-track to Principal or Director-level Collaborate with top-tier clients and consultants Be the go-to expert in a niche, high-impact field Work from our offices in Manchester, Edinburgh, or Newcastle - no London commute! We operate a 3 days per week in office hybrid working model. In addition, you will be joining a community that focuses on learning and development through regular lunch and learn sessions, investment in accredited professional courses or educational programmes. you can set the pace for your professional development, and whatever path you choose, you will receive relevant support. Essential skills: Previous relevant experience in building acoustic modelling and design Collaborative approach to innovative solutions Able to gain the best from the team around you and recognising their achievements. With Black & White's exponential growth over the last few years, numerous colleagues have progressed from engineering roles into leadership positions. You will be able to make an impact both internally and with clients and receive suitable recognition. Ready to take the lead? Apply now and let's build something extraordinary together.
Lead Senior Authorised Person (SAP) We have an opportunity for an individual with Safe System of Work (SSOW) experience to join our highly skilled engineering team at Uniper's upper tier COMAH facility, Holford Gas Storage. Holford Gas Storage is a flexible Natural Gas Storage facility designed to meet the UK's demands.The role involves leading the preparation of plant and equipment, production of safety documentation, owning and maintaining of critical procedures and equipment to deliver safety from plant hazards whilst influencing Holford's maintenance planning and delivery programmes. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities • Prepare and issue site safety documentation • Prepare plant and equipment for maintenance including draining, venting and purging of high pressure gas systems and isolation of high voltage (33KV) electrical systems to deliver safety from system derived hazards • Manage the permit office and it's administration including writing, updating and maintaining the site's safety management systems • Help plan, resource and deliver the maintenance plan at Holford by proactively engaging and with the site engineering and production teams • Provide training to other site SAP's, Uniper and contract staff • Provide guidance and governance to ensure the site wide compliance to the Uniper UK safety rules Your profile Essential • Experience of working within a safe system of work (SSOW) • Is able to understand and interpret P&ID's, instrument loop diagrams and electrical drawings in order to design safe isolations • Be methodical in your approach to work and have a strong attention to detail • Ability to work within, and promote an excellent safety culture. • Able to plan, prioritise and independently deliver planned and outage work at site • Be flexible in your approach to work and working times (this is primarily a Mon - Fri job but it will require early starts and late finishes along with some weekend working to accommodate plant maintenance activities/breakdowns) • Can work independently, and within a team with excellent communication skills • Willingness to develop themselves and the wider business personnel • Confidence to challenge established practices and procedures in a constructive manner • Proficient IT skills Desirable: • Previous experience in preparation and issue of safety documentation • Electrical or control and instrumentation trade background • Previous experience in the isolating electrical systems or a working knowledge of reading electrical line diagrams and control and instrument loop diagrams • Experience in computerised maintenance management systems (SAP PM/Merlin etc) • Previous experience in the petro-chem/oil and gas, or similar industries • Proficient IT skills • Previous SAP experience is an advantage but not strictly necessary. If a candidate displays the required attitude and aptitude full training, including a development plan will be offered to become a Senior Authorised Person initially, progressing to Lead Senior Authorised over an extended period. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: 30/09/2025 Salary: £60,000 - £74,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
Sep 04, 2025
Full time
Lead Senior Authorised Person (SAP) We have an opportunity for an individual with Safe System of Work (SSOW) experience to join our highly skilled engineering team at Uniper's upper tier COMAH facility, Holford Gas Storage. Holford Gas Storage is a flexible Natural Gas Storage facility designed to meet the UK's demands.The role involves leading the preparation of plant and equipment, production of safety documentation, owning and maintaining of critical procedures and equipment to deliver safety from plant hazards whilst influencing Holford's maintenance planning and delivery programmes. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities • Prepare and issue site safety documentation • Prepare plant and equipment for maintenance including draining, venting and purging of high pressure gas systems and isolation of high voltage (33KV) electrical systems to deliver safety from system derived hazards • Manage the permit office and it's administration including writing, updating and maintaining the site's safety management systems • Help plan, resource and deliver the maintenance plan at Holford by proactively engaging and with the site engineering and production teams • Provide training to other site SAP's, Uniper and contract staff • Provide guidance and governance to ensure the site wide compliance to the Uniper UK safety rules Your profile Essential • Experience of working within a safe system of work (SSOW) • Is able to understand and interpret P&ID's, instrument loop diagrams and electrical drawings in order to design safe isolations • Be methodical in your approach to work and have a strong attention to detail • Ability to work within, and promote an excellent safety culture. • Able to plan, prioritise and independently deliver planned and outage work at site • Be flexible in your approach to work and working times (this is primarily a Mon - Fri job but it will require early starts and late finishes along with some weekend working to accommodate plant maintenance activities/breakdowns) • Can work independently, and within a team with excellent communication skills • Willingness to develop themselves and the wider business personnel • Confidence to challenge established practices and procedures in a constructive manner • Proficient IT skills Desirable: • Previous experience in preparation and issue of safety documentation • Electrical or control and instrumentation trade background • Previous experience in the isolating electrical systems or a working knowledge of reading electrical line diagrams and control and instrument loop diagrams • Experience in computerised maintenance management systems (SAP PM/Merlin etc) • Previous experience in the petro-chem/oil and gas, or similar industries • Proficient IT skills • Previous SAP experience is an advantage but not strictly necessary. If a candidate displays the required attitude and aptitude full training, including a development plan will be offered to become a Senior Authorised Person initially, progressing to Lead Senior Authorised over an extended period. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: 30/09/2025 Salary: £60,000 - £74,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
