78 jobs found

About the role Balfour Beatty is currently recruiting a Senior P&C Design Engineer to join the Power T&D team in Leeds or Newcastle. The main function of the role is to engineer the control and protection designs for electrical substation projects up to a voltage of 400kV. The role also includes General, Planning and Procurement responsibilities. We are open to both full time and part time candidates (including job share), and offer a flexible working policy. What you'll be doing General Responsibilities: Ensure all duties are carried out in accordance with standard Company Quality, Health & Safety and Environmental Procedures and Business Process Manual. Contribute to the development and training needs of the Design Team as appropriate to skills level / experience. Planning Responsibilities: Upon contract award, liaise and co-ordinate contract requirements with Project Manager, customer, external suppliers and other Balfour Beatty Departments at earliest opportunity. Establish Design content of work package and the Design resource to achieve the required time scales, in line with Project EMPS, via development of detail engineering design plans. Effectively control, update and report on progress throughout contract life, giving estimates to complete and highlight potential resource problems to Design Manager / Project Manager. Procurement Responsibilities: Co-ordinate with other Balfour Beatty Departments as necessary to specify and quantify equipment / material to achieve greatest benefit to the company. Report variations in the Contract Scope of Work to the Design Manager / Project Manager, indicate implications and only proceed with these variations following verbal / written approval from the Project Manager. Prepare instructions for all materials and special tools required for site and pass this information to the Project Manager. Specify any specific test certificates and/or operations & maintenance manuals as part of technical spec and/or purchase order requisition. Design Responsibilities: Identify all relevant standards and Customer requirements, ensuring compliance with relevant National / International Standards and legislation, and contract specification. Design work to be undertaken with due regard to Health, Safety & Environmental Procedures and production of Designer Risk Assessments, as necessary, to fulfil the Company's obligations in compliance with current CDM regulations. Examine contract documentation and establish the Company's scope of work including termination boundaries. Where this differs with the tendered contract requirement then this differences should be highlighted to the Project Manager. Attend and contribute to Design Review / Contract Close-out Meetings, ensuring that appropriate items are actioned in a timely manner. Initiate the preparation of all required drawings and approve all drawings to be submitted for customer / sub-contractor interface. Prepare special Test Specifications and Procedures for the Inspection and Test Department. Receive "As Installed" site drawings and documentation and liaise with other Balfour Beatty Engineering Services Departments to ensure accurate final records are prepared and submitted to client in line with the requirements of the contract specification. Who we're looking for Education : HNC in Electrical Engineering or higher. Experience : Liaising with customers and suppliers : UK Industry experience, preferably National Grid. : Overall design and specification of electrical power systems and associated power system components : Calculations to demonstrate integrity of designs : Microsoft Office Packages Why work for us Day in, day out, our teams deliver some of the UK's most ambitious, exciting and meaningful projects; developing, building and maintaining the vital infrastructure that supports national economies and strengthens communities. As if contributing to and supporting work that makes life better for millions wasn't rewarding enough, we offer a full range of benefits too. You'll have the freedom to shape the package that's right for you and your life. Here are some of our key benefits: - Smart working, giving you more flexibility such as staggered start and finish times, with up to 40% remote working, where roles allow. - 25 days paid annual leave (pro rata) - Family friendly policies which include 28 weeks full pay for maternity/adoption leave and four weeks full pay for paternity/partners leave - Pension, share incentive plan, volunteering leave, recognition schemes and much more About us Balfour Beatty's Power Transmission & Distribution teams work with regional, national and international electricity network owners and operators to provide technical engineering solutions across the full spectrum of the electricity grid, including overhead lines, cabling, substations and distribution networks. From scoping and feasibility, to design, construction and on-going maintenance, our in-house experts, flexible resources and industry-leading innovations support customers in the development of some of the UK's most ambitious power transmission and distribution projects. Diversity and inclusion At Balfour Beatty we believe that diversity and inclusion are essential components of any successful, happy workplace. Through our Value Everyone Diversity and Inclusion Strategy and Action Plan, we are growing our diverse workforce and developing our inclusive culture where everyone is able to thrive and reach their full potential, regardless of their identity or background. To find out how we are making this a reality, visit We are a Gold Award holder in the Ministry of Defence 'Employer Recognition Scheme' and actively encourage applications from Armed Forces personnel, veterans and reservists. As a Disability Confident Employer, we are committed to working with people who have disabilities and long-term health conditions to remove barriers for them in obtaining employment. We are also committed to offering applicants with a disability an interview if they meet the minimum requirements for the role. For more info, visit: Job Reference: BBUK14644

Reporting to the Framework Design Manager, you will be responsible for the design delivery of non-infrastructure wastewater projects within the Severn Trent Water AMP7 and AMP8 Frameworks. This role adopts a hybrid working model, splitting time between site offices (currently Barston) three days a week and home working two days a week. You will bring experience from the water sector, specifically in non-infrastructure wastewater, with a background in Mechanical, Electrical ICA, or Civils disciplines across maintenance, design, or capital delivery roles. As a motivated team player, you will collaborate effectively with multiple teams to deliver carbon-efficient, production-focused design solutions. Your role will encompass identifying design scope and deliverables, reviewing and challenging design programmes, managing design deliverables and changes, and ensuring design solutions meet affordability, buildability, and low carbon requirements. You will lead and record design meetings, workshops on buildability, carbon, and Design for Manufacture and Assembly (DfMA), and coordinate design reviews, technical assurance, and CDM reviews. You will implement and manage the project BIM strategy, support the framework s nominated principal designer, and maintain compliance with relevant legislation, particularly health and safety. Strong communication and professional relationship management with design, delivery, commercial, and employer teams are essential. You will also liaise closely with project teams to support procurement decisions and adhere to Costain governance for design management and project delivery. Skills Experience in water sector non-infrastructure wastewater projects Mechanical, Electrical ICA, or Civils discipline expertise Design delivery, procurement, management, and control Quality assurance and BIM to ISO 19650 standards Working knowledge of NEC4 suite of contracts Ability to deliver carbon-efficient, DfMA design solutions Strong communication and collaboration skills Commercial and contractual awareness Programme preparation and management Knowledge of CDM (2015) Regulations Software/Tools BIM software compliant with ISO 19650 (e.g., Revit, Navisworks) Project management and design coordination tools Certifications & Standards HNC/HND or degree in relevant engineering discipline Progressing towards Chartered status with a relevant professional body Valid UK driving licence Familiarity with CDM (2015) Regulations NEC4 contract knowledge Please send CVs to (url removed)

Job Description Senior Chemical Process Engineer Full-Time / Hybrid Derby, Raynesway We are looking for capable, experienced and proactive individuals to join our growing team and be responsible for leading chemical process engineering packages. These are high-impact roles, ideal for experienced engineers who thrive on technical complexity, process rigour and innovation with purpose. This is an opportunity use your deep experience in chemical engineering to play a part in the Regeneration of the Raynesway Nuclear Licenced Site. This once in a lifetime major infrastructure programme is replacing the current facilities with modern state of the art manufacturing capability. You will be working across multiple projects and lifecycle stages in order to ensure that the areas under your responsibility meet both our engineering and project requirements. You will be able to interact with various stakeholders both internal and external to the business in order to be successful. You will be supported by a community of around 3,000 engineers in the Submarines business with training and development to allow you to build your skills and thrive in-role. The role will be based in Derby but with opportunities for hybrid working. Although experience of working with nuclear facilities is certainly advantageous, we invite applications from those that are interested in redeploying their existing capabilities in a new area. What is most important is having the right approach; you need to be someone who can work with and influence engineers from other disciplines so that chemical engineering is an integral part of the overall engineering solution. What you will be doing Act as 'Intelligent Customer' for chemical engineering aspects of design and construction. These aspects include process design; P&IDs; mass & energy balances; hazard studies; sizing, pressure and flow calculations.Ensure that principles of inherent safety, hierarchy of controls and simplification are embedded into the design.Lead the development of requirements and design options for chemical engineering packages. Provide assurance that requirements have been appropriately incorporated into design and construction.Ensure that chemical engineering within the project is carried out in accordance with required engineering and project processes. Review and acceptance of chemical engineering documentation and drawings produced by the external supply chain.Provide input to the production of engineering processes, plans and strategies. Production of applicable aspects of safety and environmental documentation. Implement engineering controls on chemical process engineering work carried out internally and in the external supply chain.Ensuring that chemical process systems are adequately commissioned and decommissioned.To support the Engineering Manager in ensuring that Suitably Qualified and Experienced Persons (SQEP) both internally and in the external supply chain are performing chemical engineering work.Provide technical authority, mentorship and review input for junior engineers and cross-functional design teams. Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Chemical/Process Engineering degree or similar relevant discipline, although experience and capability will be taken into consideration. Experienced in the design, construction and operation of nuclear and/or conventional facilities and infrastructure within the UK ideally including experience of undertaking and assessing design of facilities. Familiarity with Nuclear Site Licensing Conditions, Safety Assessment Principles (SAPs) and Technical Assessment Guides (TAGs) is advantageous.Experience of working on COMAH or similar high hazard sites. Knowledge of Process Safety tools and techniquesUnderstanding of modern control principles relating to chemical processesExperience and knowledge of nuclear safety case production. Familiarity with applicable regulations, codes and standards.You will also be a Chartered Engineer or hold an affiliate/associate membership of a relevant professional body and be working towards Chartered/Incorporated status. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for the Rolls-Royce Submarines business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. Job Category Transformation & Operations Posting Date 11 Jul 2025; 00:07 Posting End Date PandoLogic.

About the role Balfour Beatty are currently looking for Senior Primary Design Engineer to join their Power T&D team in Newcastle or Leeds. The main function of the role is Primary Engineering design delivery for electrical substation projects up to a voltage of 400kV with the assistance of the Design Engineers. The role also includes supporting the team in planning and procurement responsibilities as detailed below for delivery of substation projects. What you'll be doing Key accountabilities: Deliver design to the Customer specification requirements, ensuring compliance with relevant National / International Standards and legislation. Check and approve HV plant design deliverables e.g. single line diagram, layout/Elevation drawings, MEWP access layouts, SC force calculations, earthing design / calculations etc. Work with due regard to Health & Safety Procedures and the Company's obligations in compliance with current CDM regulations. Any perceived risks and mitigation measures should be advised to Engineering Manager for effective action. Ensure all required models and drawings have an adequate level of review and approval including the supplier and subcontractor supply chains. Incorporating the best practice of BIM as established in the Engineering team. General Responsibilities: Ensure duties are carried out in accordance with Standard Company Quality, Health & Safety and Environmental Procedures and Business Process Manuals. Delivery of engineering design to programme, quality and budgets, and lead safety and sustainability by Design into the engineering delivery. Functionally the authorised approver of designs (and associated settings) on contracts in accordance with the published design/check/approve authorisation levels. Commercial/Contract Responsibilities: Report variations in the Contract Scope of Work to the Design Manager / engineering manager, indicate implications and only proceed with these variations following verbal / written approval from the Engineering Manager Design Responsibilities: Identify all relevant standards and Customer requirements, ensuring compliance with relevant National / International Standards and legislation, and contract specification Design work to be undertaken with due regard to Health, Safety & Environmental Procedures and production of Designer Risk Assessments, as necessary, to fulfil the Company's obligations in compliance with current CDM regulations. AIS and GIS substation design up to 400kV. Who we're looking for Education: Minimum HNC in Electrical Engineering or equivalent. A Graduation engineering degree is desirable. Member of IET (MIET). Working towards Chartership (CEngg). Experience: Liaising with customers and suppliers Overall design and specification of electrical power systems and associated power system components Calculations to demonstrate integrity of designs Microsoft Office Packages AutoCAD 2D / Revit Experience Working on BIM360 Experience as HV Substation / Primary Plant Design Engineer: Liaising with customers and suppliers Basic understanding of P&C aspects preferable. TP141 HV Substation qualification is an advantage Why work for us Day in, day out, our teams deliver some of the UK's most ambitious, exciting and meaningful projects; developing, building and maintaining the vital infrastructure that supports national economies and strengthens communities. As if contributing to and supporting work that makes life better for millions wasn't rewarding enough, we offer a full range of benefits too. You'll have the freedom to shape the package that's right for you and your life. Here are some of our key benefits: - Smart working, giving you more flexibility such as staggered start and finish times, with up to 40% remote working, where roles allow. - 25 days paid annual leave (pro rata) - Family friendly policies which include 28 weeks full pay for maternity/adoption leave and four weeks full pay for paternity/partners leave - Pension, share incentive plan, volunteering leave, recognition schemes and much more About us Our skilled and dedicated teams deliver a range of proactive and reactive services which support a reliable and safe supply of power flowing to millions of homes and businesses around the world. Our contracts range from 50,000 schemes to 100 million plus major projects. Balfour Beatty's Power Transmission & Distribution teams work with regional, national and international electricity network owners and operators to provide technical engineering solutions. With experience and expertise across the full spectrum of the electricity grid our teams have capability across overhead lines, cable tunnels, distribution networks and substations. From scoping and feasibility, to design, construction and on-going maintenance, our in-house experts, flexible resources and industry-leading innovations support clients in the development of some of the world's most ambitious power transmission and distribution projects. At Balfour Beatty we are committed to creating a diverse workforce and an inclusive culture where everyone can be themselves and reach their full potential, not only because this is the right thing to do, but because it makes us a better business. To ensure we deliver on this commitment, we have a UK Diversity and Inclusion Action Plan which sets out the wide range of targeted, proactive, measurable steps we are taking to make this a reality. You can read our UK Diversity and Inclusion Action Plan in full at To help and support us with our desired commitment to create an inclusive culture we are members of WISE, enei, Business Disability Forum and Women into Construction. In 2020, we signed the Audeliss and Involve Open Letter to demonstrate our commitment to taking key long term and sustainable actions on Black Inclusion. Job Reference: BBUK14653

The Engineering Coordinator/ Planner offers a basic salary of 39,500 working for a PLC listed market leading manufacturer based at their Throckley factory near Newcastle. The Engineering Coordinator/ Planner will work closely with the Site Engineering Manager and Engineering Team Leaders, to maximize the performance of engineering operations and will coordinate the work planning of the maintenance team and contract labour, including shutdowns and PPMs. What's in it for you as an Engineering Coordinator/ Planner : Salary: 39,500 Day's based position - Monday to Friday 8am - 4.30pm Pension contribution up to 10% Health Care Scheme Aviva Digi+ Share Scheme options Training and career development opportunities Job security and personal development within a market leading, international manufacturing organisation. Main duties of Engineering Coordinator/ Planner : Salary: 39,500 Coordinate the maintenance shutdown establishing best engineering practices Control and populate the engineering shift plan for all engineering personnel across all disciplines including contractors To chair weekly scheduling meetings for planned activities Control, populate and prioritise a work backlog for all maintenance activities or activities involving the engineering team Work closely with the Engineering Maintenance Supervisor, Engineering Manager, and Operational Managers to provide a schedule of work for shift engineers to maintain and improve the reliability of assets Liaise with production, services, and central functions, to ensure that routine maintenance is planned, and job requests are executed and costed efficiently and effectively Ensure that equipment removed from the plant, which is being repaired in-house, is coordinated through the shift plan, Work Orders allocated to the repair of each item and appropriate cost captured Control of accurate records and documentation for all production and auxiliary plant including insurance records Coordinate and site contact for Contractors to ensure safe and controlled activities are completed on-site and to the quality of engineering standards Experience required to apply for Engineering Coordinator / Planner : Strong organisational skills, ability to plan resources and coordinate people effectively Problem-solving tools and techniques to deliver efficiency Good Excel skills Good Communication techniques Continuous Improvement Approach

We are currently looking for a Senior Cost Manager to join the Sizewell C team. This is a contract role to run to the end of the year but likely to be extended and be long term. This can be based in their offices in London or in Suffolk with hybrid working. SZC Project Controls will serve as a centre of excellence, managing and strategically using delivery performance management information. Our team will enable successful delivery of SZC Project through proactive Project Controls that drives forward-looking solutions to continuously improve performance. As the Senior Cost Manager in the Central PMO team, you will work closely with the functional Lead, and be responsible for the deployment, and continuous improvement of all the Cost Management elements of the project. The post holder will provide oversight and assurance within the Cost Management framework that supports the SZC governance structure, organisation and delivery model. They will ensure the adherence to the utilisation of the software applications and supporting infrastructure to ensure Cost Management SZC is 'Digital by Default'. The candidate must also have demonstrable experience of working within the Cost Management function on in a Mega Project environment, with an in depth understanding of Cost Management principles including both scope delivered by the Supply Chain and scope delivered by the Client. They candidate will have significant knowledge of the Project Controls functions and their purpose to be able to carry out assurance activities within Cost Management without a reliance on the functional lead. Ideally, they will be able to demonstrate previous experience of providing narrative and presentations for multiple levels in a Programme, Project or Business from Delivery Teams and Functions through to Boards and Investors. They will have experience of working with Executive Leadership Teams and will be comfortable in deputising for the Cost Lead to co-ordinate and run Cost Steering Committees. They will be a people leader with experience of supporting their team with continued professional development and using their leadership skills to build and maintain a high-performing team. Principal Accountabilities All of the above captured in Overview above Supporting the Cost Lead in ensuring the Cost Management function is adhering to the functional Procedures, Guidelines and Work Instructions. Support the Cost Lead in ad-hoc presentations, reports and insightful 'so what' analysis for key stakeholders to make decisions to positively affect the Projects outcome. Provide functional help and support to Programme teams. Act as First line of defence for the assurance of Cost information provided by the Programme Delivery teams, including ensuring the Cost management system is updated in line with project drumbeat. First escalation point for the Programme Cost Leads in relation to business-as-usual requirements Help ensure cost management always has the correct context and value add to the Delivery and Project leadership. Support development of the Cost Management Framework and embedment within SZC and become a main interface between Cost and other functions within project controls, as well as other key stakeholders. Delivery and advancement of 'Digital by Default' for the Cost Management Function. Responsible for the on-time production and quality of all month end data sets and performance reports related to Cost Management. Responsible for the accurate assessment of the Current Forecast for the Project, including impact of approved changes and Trends. Knowledge, Skills, Qualifications, Experience Essential Degree or equivalent qualification in business analysis, accounting, finance, construction, engineering or project management, or related technical field. A track record of working as Cost Lead or Project Controls Manager on large and complex infrastructure projects. Very strong mitigation-related skills underpinned by in depth understanding of project and construction methods and processes. Extensive experience at multiple levels of organisation including client/operator, contactor/supplier, consultancy and government experience. Experience with increasing responsibility showing an ability to manage senior stakeholders. Deliverables focused and an accomplished problem solver, rising to meet any challenge. Excellent presentation, influencing and facilitation skills. Exceptional interpersonal and communication skills. Desirable Active membership of ACostE or APM or similar association with association certifications. Experience of working within multiple Project Controls Functions of cost control, estimating, scheduling, change management and cost management. User of a range of reporting and analytics software and project controls systems particularly Power BI. Understanding of various contract types, in particular the NEC suite and FIDIC. Experience in the Nuclear sector. Closing date 15.9.25 This role falls inside IR35

Are you an experienced Shift Manager who is used to working in a fast paced manufacturing facility where no day is the same? Are you looking to join a business that can offer you continuous career progression, training and support? The Shift manager will be accountable for the effective leadership and performance of the production function across all shifts. This role manages a team of Shift Supervisors and is responsible for ensuring that production, quality, cost, delivery, safety, and people management objectives are consistently met. The Manager will drive operational excellence through continuous improvement, effective resource planning, and strong cross-functional collaboration. Leadership duties Lead, coach, and develop Shift Supervisors to ensure consistent performance and adherence to company standards. Act as the key liaison between the Operations Director and the production floor. Promote a culture of accountability, safety, and continuous improvement across all shifts. Operational tasks Ensure production targets are met in terms of output, quality, efficiency, and cost. Monitor and analyse KPIs such as Safety, Quality, Cost, delivery and People implement corrective actions where necessary. Coordinate with planning, quality, maintenance, and engineering teams to ensure smooth operations and timely delivery. Ensure compliance with SOPs, health & safety regulations, and company policies. The role will report directly into the Operations Director who leads from the front in performance management and ensuring the facilities hit all targets set. Within this role Continuous Improvement is a key deliverable that will be in your everyday activities which will include the following: Champion Lean Manufacturing principles and lead initiatives to reduce waste, improve cycle times, and enhance product quality. Lead root cause analysis and implement sustainable countermeasures for recurring issues. Support implementation of engineering changes, trials, and new product introductions. The Shift Manager position will work across a rotating mornings and afternoon shift with the typical hours consisting of 6am-2pm / 2pm-10pm. In return my client offers a industry leading salary, fantastic additional benefits consisting of pension, training and bonus. It is a critical position within the organizational chart, working amongst the senior leadership team and having a big involvement on the future of the company. Wentworth James Recruitment Group is a specialist recruitment agency based in Cannock, Staffordshire. The company focuses on providing staffing solutions across various sectors, including engineering, manufacturing, construction, and renewables. Wentworth James offers a range of recruitment services, such as temporary, contract, temp-to-perm, and permanent placements . The agency prides itself on core values of honesty, efficiency, and reliability, aiming to provide a transparent and supportive recruitment experience.

Job Title: Plater Location : Hyde, Manchester AVK Syddal provides the Water, Gas and Waste Water Utility sectors with a complete range of pipe work fittings from bespoke fabrications to simple repair clamps, through a variety of flexible service offers ranging from products supplied for emergencies in a matter of hours to programmed supply for major capital projects. Our modern dedicated manufacturing facility near Manchester in the UK, has a full team of skilled personnel from CAD designers to welder/platers all of whom are dedicated to providing quality products to the customers requirements in line with our Expect AVK Initiative. We're recruiting for a Plater to join our successful production team in Hyde. Your overall responsibility will be to read technical drawings and carry out the forming and construction of the product to the tolerances stated on the drawings in a timely manner. The suited candidate will have previous experience within a similar role from a manufacturing environment. What we offer: The opportunity to be part of a global organisation, working in a stable, clean environment with the opportunity to be supported in your learning and development Excellent support from your supervisors and Operations Manager with the chance to suggest improvements to help benefit the site 33 days holiday (including statutory Public Holidays). Life Assurance plan (x3). Company pension plan. Discounts and cashback across many high-street and online retailers (Supermarkets, Entertainment, Fashion, Days Out, Technology, Home, and Travel) WORKING HOURS: 38.5 hours per week - This role will require flexibility to meet the needs of the business. Monday-Thursday: (Apply online only) Friday: (Apply online only) If you would like to apply please do so using the application link in this advert and we look forward to hearing from you!

Our client Scottish Power Transmissions are currently recruiting for a CAD Operator to join their team based in Cambuslang/Edinburgh on a contract basis initially. Ideally for this role they are looking for an experienced CAD Operator with a background in Wayleaves and Estates Planning. For more information on this role see below: Scottish Power s Drawing Office is growing to meet increasing business needs, and we are looking for a CAD Operator to join our team to support our Eastern Green Link 4 HVDC project This role will be embedded within the EGL4 HVDC project team supported by the Drawing Office Manager within EMO As a CAD Operator, you will be instrumental in developing and implementing engineering drawing solutions for Transmission Network Projects (132kV and above) in the following areas. • Wayleaves / Estates / Planning - Drawing Production Your strong draughting capability in 2D / 3D drawing and attention to detail will be crucial in ensuring the team s success and maintaining high standards. You should also have a desire to learn and continuously improve your skills. Key Responsibilities: • Preparation of Drawings: Developing both feasibility and detailed design drawings for complex transmission / distribution projects. • Compliance: Understanding and implementing current company safety, quality, and environmental standards into your daily work. • Information Gathering: Collecting relevant information to produce accurate drawings. • Standards Promotion: Understanding and implementing current company drawing standards and procedures into your daily work. • Database Maintenance: Overseeing the maintenance and upkeep of drawing office databases. • Design Change System: Maintaining an auditable design/design change system to facilitate current standard accreditation. • Drawing Assessment: Assessing basic and detailed engineering drawings during approval process. • Team Support: Providing support to other team members within the limits of your experience and knowledge. • Client Delivery: Ensuring timely delivery of high-quality work to clients, achieving high client satisfaction. • Documentation Review: Reviewing drawing documentation and processes within the Drawing Office. • Communications: Keeping Senior Engineer and clients updated on work progress and any issues that arise. These responsibilities will be supported by Senior Engineer or CAD Designer (Drawing Office) Geographical Area: Scotland. Travel Requirements: Must be able to travel independently to effectively support project site activities. Skills, Knowledge & Experience Technical Expertise: Ability to demonstrate your working experience and knowledge in one or more of the following areas. • Production of relevant plans and drawings in support of Compulsory Purchase Order processes, wayleave and servitude plans, and support of all other planning and consenting functions, whilst integrating elements of o Civil/Substation Layouts Design - Drawing Production o Cable Route Design - Drawing Production Knowledge: Good understanding of different drawing types that make up a typical construction project pack in your chosen discipline. Design and Safety Compliance: Good understanding of engineering design principles and health & safety requirements. Communication Skills: Excellent interpersonal and communication skills, both verbal and written. Collaboration: Ability to build effective working relationships with individuals, departments, and businesses. Software Proficiency: Skilled in using Autodesk products, including AutoCAD, Vault, ACC, ProjectWise, Raster Design, and the MS Office suite. Organisational Skills: Strong organizational abilities to ensure high client satisfaction and the capability to plan and manage conflicting requirements to meet tight deadlines. Analytical Skills: Ability to analyze and understand detailed electricaldesign drawings for transmission/distribution network design projects. Team Support: Assist fellow team members within the scope of your expertise and experience. Growth: The ideal candidate would be a proactive team member who is keen to develop their career. Internal and External Relationships A collaborative and directing or influencing relationship will be used as appropriate to effectively develop and deliver transmission networks projects. The purpose and nature of the relationship will depend on the complexity of the project and particular division of responsibilities. This role requires a proactive individual who is eager to advance their career, foster relationships with project team members, and provide support to colleagues. Internal: Engineering Team HVDC Project team Land & Planning team Consents team External: Design Houses Consultants Manufacturers Industry Forums Minimum Criteria • Qualifications: HNC Computer Aided Architectural Design and Technology or HNC Computer Aided Draughting Design or HNC Electrical Engineering or HNC Civil Engineering or HNC Mechanical Engineering or HNC Structural Engineering or previous experience in electrical engineering drawing office. Essential • Technical Knowledge: Working Knowledge of drawing production in your chosen field. - Desirable • Experience: Proven experience as an electrical draughtsperson with knowledge of engineering design, health & safety requirements, and compliance - Desirable • Standards: Working knowledge of drawing standards and procedures - Desirable • Software Proficiency: Skilled in using 2D / 3D Autodesk products, including AutoCAD, Vault, ACC, ProjectWise, Raster Design, and the MS Office suite. - Essential. • Additional Requirement: Possession of a UK driving license to attend site. - Essential.

Job title: Principal Manufacturing Engineer - SSNA Infrastructure Location: Barrow-in-Furness. On-site Salary: £47,271 - £56,000 What you'll be doing: Develop concept industrial capabilities, infrastructure and technology into requirement plans and business cases Project manage the delivery of your scope, plan and schedule respective WBS aligned to annual & quarterly deliverables for future facility Establishing and maturing facility and infrastructure requirements as defined by Senior Requirements Manager of DoA, leading a change with a New Production Line Operating Model for concept industrial capabilities through RIBA LCM Influencing how future manufacturing is carried out within our facilities, conducting process maps, producing analysis, technical query resolution and demonstrating tangible outputs for improvement Bringing forward innovative ideas for the Submarine build philosophy and the build environment, while retaining appreciation for the current ways of working throughout the production line Building and maintaining relationships with facility owners, the senior leadership team, Subject Matter Experts and key stakeholders; managing both internal and external line of influence Responsible for translating the Engineering Design intent (Drawings, Standards etc.) into Manufacturing Engineering data for use in facilities capability development ensuring appropriate levels of documents authoring & controls are maintained Your skills and experiences: HNC/D or equivalent within the Construction, Engineering or Project Management fields Subs Operations / Trade Domain knowledge advantageous (Coatings, Build, T&C), Engineering or Infrastructure / Facility Management experience Stakeholder management and Subs networking experience advantageous Experience in managing complex projects, programmes or portfolios including, AutoCAD SolidWorks skills beneficial Experience of Engineering or Project oversight to major projects, oversight of facility configuration and management of system Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Build & Test (SSNA Infrastructure) Team: As a Principal Manufacturing Engineer, you will oversee a team delivering complex, cross-discipline manufacturing projects, ensuring methods of manufacture, assembly, and repair meet safety, quality, cost, and delivery targets throughout the product lifecycle. You'll apply your expertise to ensure design intent is achieved in operations, manage resources to support project delivery, and balance stakeholder demands across Manufacturing Operations and Programme teams. This is a key leadership role focussed on driving capability, compliance, and operational excellence. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you will be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically leave 5 to 10 years of continuous residency in the UK depending in the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15 th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job title: Principal Manufacturing Engineer - SSNA Infrastructure Location: Barrow-in-Furness. On-site Salary: £47,271 - £56,000 What you'll be doing: Develop concept industrial capabilities, infrastructure and technology into requirement plans and business cases Project manage the delivery of your scope, plan and schedule respective WBS aligned to annual & quarterly deliverables for future facility Establishing and maturing facility and infrastructure requirements as defined by Senior Requirements Manager of DoA, leading a change with a New Production Line Operating Model for concept industrial capabilities through RIBA LCM Influencing how future manufacturing is carried out within our facilities, conducting process maps, producing analysis, technical query resolution and demonstrating tangible outputs for improvement Bringing forward innovative ideas for the Submarine build philosophy and the build environment, while retaining appreciation for the current ways of working throughout the production line Building and maintaining relationships with facility owners, the senior leadership team, Subject Matter Experts and key stakeholders; managing both internal and external line of influence Responsible for translating the Engineering Design intent (Drawings, Standards etc.) into Manufacturing Engineering data for use in facilities capability development ensuring appropriate levels of documents authoring & controls are maintained Your skills and experiences: HNC/D or equivalent within the Construction, Engineering or Project Management fields Subs Operations / Trade Domain knowledge advantageous (Coatings, Build, T&C), Engineering or Infrastructure / Facility Management experience Stakeholder management and Subs networking experience advantageous Experience in managing complex projects, programmes or portfolios including, AutoCAD SolidWorks skills beneficial Experience of Engineering or Project oversight to major projects, oversight of facility configuration and management of system Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Build & Test (SSNA Infrastructure) Team: As a Principal Manufacturing Engineer, you will oversee a team delivering complex, cross-discipline manufacturing projects, ensuring methods of manufacture, assembly, and repair meet safety, quality, cost, and delivery targets throughout the product lifecycle. You'll apply your expertise to ensure design intent is achieved in operations, manage resources to support project delivery, and balance stakeholder demands across Manufacturing Operations and Programme teams. This is a key leadership role focussed on driving capability, compliance, and operational excellence. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you will be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically leave 5 to 10 years of continuous residency in the UK depending in the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15 th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job title: Principal Manufacturing Engineer - SSNA Infrastructure Location: Barrow-in-Furness. On-site Salary: £47,271 - £56,000 What you'll be doing: Develop concept industrial capabilities, infrastructure and technology into requirement plans and business cases Project manage the delivery of your scope, plan and schedule respective WBS aligned to annual & quarterly deliverables for future facility Establishing and maturing facility and infrastructure requirements as defined by Senior Requirements Manager of DoA, leading a change with a New Production Line Operating Model for concept industrial capabilities through RIBA LCM Influencing how future manufacturing is carried out within our facilities, conducting process maps, producing analysis, technical query resolution and demonstrating tangible outputs for improvement Bringing forward innovative ideas for the Submarine build philosophy and the build environment, while retaining appreciation for the current ways of working throughout the production line Building and maintaining relationships with facility owners, the senior leadership team, Subject Matter Experts and key stakeholders; managing both internal and external line of influence Responsible for translating the Engineering Design intent (Drawings, Standards etc.) into Manufacturing Engineering data for use in facilities capability development ensuring appropriate levels of documents authoring & controls are maintained Your skills and experiences: HNC/D or equivalent within the Construction, Engineering or Project Management fields Subs Operations / Trade Domain knowledge advantageous (Coatings, Build, T&C), Engineering or Infrastructure / Facility Management experience Stakeholder management and Subs networking experience advantageous Experience in managing complex projects, programmes or portfolios including, AutoCAD SolidWorks skills beneficial Experience of Engineering or Project oversight to major projects, oversight of facility configuration and management of system Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Build & Test (SSNA Infrastructure) Team: As a Principal Manufacturing Engineer, you will oversee a team delivering complex, cross-discipline manufacturing projects, ensuring methods of manufacture, assembly, and repair meet safety, quality, cost, and delivery targets throughout the product lifecycle. You'll apply your expertise to ensure design intent is achieved in operations, manage resources to support project delivery, and balance stakeholder demands across Manufacturing Operations and Programme teams. This is a key leadership role focussed on driving capability, compliance, and operational excellence. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you will be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically leave 5 to 10 years of continuous residency in the UK depending in the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15 th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job title: Principal Manufacturing Engineer - SSNA Infrastructure Location: Barrow-in-Furness. On-site Salary: £47,271 - £56,000 What you'll be doing: Develop concept industrial capabilities, infrastructure and technology into requirement plans and business cases Project manage the delivery of your scope, plan and schedule respective WBS aligned to annual & quarterly deliverables for future facility Establishing and maturing facility and infrastructure requirements as defined by Senior Requirements Manager of DoA, leading a change with a New Production Line Operating Model for concept industrial capabilities through RIBA LCM Influencing how future manufacturing is carried out within our facilities, conducting process maps, producing analysis, technical query resolution and demonstrating tangible outputs for improvement Bringing forward innovative ideas for the Submarine build philosophy and the build environment, while retaining appreciation for the current ways of working throughout the production line Building and maintaining relationships with facility owners, the senior leadership team, Subject Matter Experts and key stakeholders; managing both internal and external line of influence Responsible for translating the Engineering Design intent (Drawings, Standards etc.) into Manufacturing Engineering data for use in facilities capability development ensuring appropriate levels of documents authoring & controls are maintained Your skills and experiences: HNC/D or equivalent within the Construction, Engineering or Project Management fields Subs Operations / Trade Domain knowledge advantageous (Coatings, Build, T&C), Engineering or Infrastructure / Facility Management experience Stakeholder management and Subs networking experience advantageous Experience in managing complex projects, programmes or portfolios including, AutoCAD SolidWorks skills beneficial Experience of Engineering or Project oversight to major projects, oversight of facility configuration and management of system Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Build & Test (SSNA Infrastructure) Team: As a Principal Manufacturing Engineer, you will oversee a team delivering complex, cross-discipline manufacturing projects, ensuring methods of manufacture, assembly, and repair meet safety, quality, cost, and delivery targets throughout the product lifecycle. You'll apply your expertise to ensure design intent is achieved in operations, manage resources to support project delivery, and balance stakeholder demands across Manufacturing Operations and Programme teams. This is a key leadership role focussed on driving capability, compliance, and operational excellence. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you will be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically leave 5 to 10 years of continuous residency in the UK depending in the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15 th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job title: Principal Manufacturing Engineer - SSNA Infrastructure Location: Barrow-in-Furness. On-site Salary: £47,271 - £56,000 What you'll be doing: Develop concept industrial capabilities, infrastructure and technology into requirement plans and business cases Project manage the delivery of your scope, plan and schedule respective WBS aligned to annual & quarterly deliverables for future facility Establishing and maturing facility and infrastructure requirements as defined by Senior Requirements Manager of DoA, leading a change with a New Production Line Operating Model for concept industrial capabilities through RIBA LCM Influencing how future manufacturing is carried out within our facilities, conducting process maps, producing analysis, technical query resolution and demonstrating tangible outputs for improvement Bringing forward innovative ideas for the Submarine build philosophy and the build environment, while retaining appreciation for the current ways of working throughout the production line Building and maintaining relationships with facility owners, the senior leadership team, Subject Matter Experts and key stakeholders; managing both internal and external line of influence Responsible for translating the Engineering Design intent (Drawings, Standards etc.) into Manufacturing Engineering data for use in facilities capability development ensuring appropriate levels of documents authoring & controls are maintained Your skills and experiences: HNC/D or equivalent within the Construction, Engineering or Project Management fields Subs Operations / Trade Domain knowledge advantageous (Coatings, Build, T&C), Engineering or Infrastructure / Facility Management experience Stakeholder management and Subs networking experience advantageous Experience in managing complex projects, programmes or portfolios including, AutoCAD SolidWorks skills beneficial Experience of Engineering or Project oversight to major projects, oversight of facility configuration and management of system Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Build & Test (SSNA Infrastructure) Team: As a Principal Manufacturing Engineer, you will oversee a team delivering complex, cross-discipline manufacturing projects, ensuring methods of manufacture, assembly, and repair meet safety, quality, cost, and delivery targets throughout the product lifecycle. You'll apply your expertise to ensure design intent is achieved in operations, manage resources to support project delivery, and balance stakeholder demands across Manufacturing Operations and Programme teams. This is a key leadership role focussed on driving capability, compliance, and operational excellence. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you will be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically leave 5 to 10 years of continuous residency in the UK depending in the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15 th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job title: Principal Manufacturing Engineer - SSNA Infrastructure Location: Barrow-in-Furness. On-site Salary: £47,271 - £56,000 What you'll be doing: Develop concept industrial capabilities, infrastructure and technology into requirement plans and business cases Project manage the delivery of your scope, plan and schedule respective WBS aligned to annual & quarterly deliverables for future facility Establishing and maturing facility and infrastructure requirements as defined by Senior Requirements Manager of DoA, leading a change with a New Production Line Operating Model for concept industrial capabilities through RIBA LCM Influencing how future manufacturing is carried out within our facilities, conducting process maps, producing analysis, technical query resolution and demonstrating tangible outputs for improvement Bringing forward innovative ideas for the Submarine build philosophy and the build environment, while retaining appreciation for the current ways of working throughout the production line Building and maintaining relationships with facility owners, the senior leadership team, Subject Matter Experts and key stakeholders; managing both internal and external line of influence Responsible for translating the Engineering Design intent (Drawings, Standards etc.) into Manufacturing Engineering data for use in facilities capability development ensuring appropriate levels of documents authoring & controls are maintained Your skills and experiences: HNC/D or equivalent within the Construction, Engineering or Project Management fields Subs Operations / Trade Domain knowledge advantageous (Coatings, Build, T&C), Engineering or Infrastructure / Facility Management experience Stakeholder management and Subs networking experience advantageous Experience in managing complex projects, programmes or portfolios including, AutoCAD SolidWorks skills beneficial Experience of Engineering or Project oversight to major projects, oversight of facility configuration and management of system Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Build & Test (SSNA Infrastructure) Team: As a Principal Manufacturing Engineer, you will oversee a team delivering complex, cross-discipline manufacturing projects, ensuring methods of manufacture, assembly, and repair meet safety, quality, cost, and delivery targets throughout the product lifecycle. You'll apply your expertise to ensure design intent is achieved in operations, manage resources to support project delivery, and balance stakeholder demands across Manufacturing Operations and Programme teams. This is a key leadership role focussed on driving capability, compliance, and operational excellence. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you will be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically leave 5 to 10 years of continuous residency in the UK depending in the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 15 th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.