Shielding Engineer to design and optimize radiation shielding for the Odin micro-reactor. The role demands the identification and development of cost-effective shielding solutions due to the stringent cost constraints of microreactors, presenting a unique engineering challenge. As part of our dynamic physics team, you will proactively collaborate with scientists and engineers from other disciplines, leveraging your expertise and strong communication skills to influence Odin s design and ensure regulatory compliance in a fast-paced startup environment. Reporting to: Lead Physicist & CEO Job Type: Full-Time (Part-Time would be considered) About Us Cambridge AtomWorks is the design authority for the Odin nuclear micro-reactor and is situated at the heart of the Cambridge innovation ecosystem. We are building a high-calibre, collaborative team of experts in nuclear engineering, materials science, thermal hydraulics, and electricity generation. As we take the company forward, Cambridge AtomWorks will require innovative engineering and manufacturing approaches across these fields to establish itself in emerging energy markets. Key Responsibilities Design cost effective and practical shielding solutions for the Odin microreactor. Assess radiation damage and detector sensitivities. Conduct dose assessments, for the reactor and other sources, e.g. transport flasks. Assess the performance of shielding solutions using deterministic and Monte Carlo methods. Develop and implement robust validation and verification strategy for shielding designs. Produce clear and comprehensive documentation to support design and performance assessments. Review and ensure the quality of shielding work produced by self and peers, maintaining high standards. Ensure compliance of shielding solutions with regulatory requirements. Collaborate with multi-disciplinary teams including engineering, thermal hydraulics, materials and chemistry, safety and licensing. Effectively communicate challenges and solutions to internal teams, regulators, and potential customers. Required Qualifications, Experience and Skills 2:1 or above Bachelor s, or Masters degree in Engineering, Physics or a related field. Familiarity with shielding codes and methods. Strong understanding of radiation shielding physics (e.g., neutron, gamma attenuation). Understanding of shielding design challenges in nuclear applications. Team player who can work in a cross-disciplinary environment. Clear and persuasive communicator with strong documentation skills. Preferred Experience Experience in nuclear industry or related fields (e.g., medical physics, fusion). Understanding of the inner workings of deterministic/Monte Carlo shielding methods. Use of shielding codes (e.g. MCBEND, Atilla) for significant packages of work. Experience in applying uncertainty quantification methods to shielding problems. What We Offer Challenging Work: Contribute to the development of a compact nuclear micro-reactor. Professional Growth: Direct mentorship from leading experts and close relationships with academia and industry. Flexible Work Competitive Benefits: Competitive salary, salary sacrifice pension scheme and 25 days annual leave. Strategic Impact: Be part of a rapidly growing organization shaping the future of the nuclear sector. Please submit your CV and covering letter to by the deadline of noon on 16 September 2025.
Sep 04, 2025
Full time
Shielding Engineer to design and optimize radiation shielding for the Odin micro-reactor. The role demands the identification and development of cost-effective shielding solutions due to the stringent cost constraints of microreactors, presenting a unique engineering challenge. As part of our dynamic physics team, you will proactively collaborate with scientists and engineers from other disciplines, leveraging your expertise and strong communication skills to influence Odin s design and ensure regulatory compliance in a fast-paced startup environment. Reporting to: Lead Physicist & CEO Job Type: Full-Time (Part-Time would be considered) About Us Cambridge AtomWorks is the design authority for the Odin nuclear micro-reactor and is situated at the heart of the Cambridge innovation ecosystem. We are building a high-calibre, collaborative team of experts in nuclear engineering, materials science, thermal hydraulics, and electricity generation. As we take the company forward, Cambridge AtomWorks will require innovative engineering and manufacturing approaches across these fields to establish itself in emerging energy markets. Key Responsibilities Design cost effective and practical shielding solutions for the Odin microreactor. Assess radiation damage and detector sensitivities. Conduct dose assessments, for the reactor and other sources, e.g. transport flasks. Assess the performance of shielding solutions using deterministic and Monte Carlo methods. Develop and implement robust validation and verification strategy for shielding designs. Produce clear and comprehensive documentation to support design and performance assessments. Review and ensure the quality of shielding work produced by self and peers, maintaining high standards. Ensure compliance of shielding solutions with regulatory requirements. Collaborate with multi-disciplinary teams including engineering, thermal hydraulics, materials and chemistry, safety and licensing. Effectively communicate challenges and solutions to internal teams, regulators, and potential customers. Required Qualifications, Experience and Skills 2:1 or above Bachelor s, or Masters degree in Engineering, Physics or a related field. Familiarity with shielding codes and methods. Strong understanding of radiation shielding physics (e.g., neutron, gamma attenuation). Understanding of shielding design challenges in nuclear applications. Team player who can work in a cross-disciplinary environment. Clear and persuasive communicator with strong documentation skills. Preferred Experience Experience in nuclear industry or related fields (e.g., medical physics, fusion). Understanding of the inner workings of deterministic/Monte Carlo shielding methods. Use of shielding codes (e.g. MCBEND, Atilla) for significant packages of work. Experience in applying uncertainty quantification methods to shielding problems. What We Offer Challenging Work: Contribute to the development of a compact nuclear micro-reactor. Professional Growth: Direct mentorship from leading experts and close relationships with academia and industry. Flexible Work Competitive Benefits: Competitive salary, salary sacrifice pension scheme and 25 days annual leave. Strategic Impact: Be part of a rapidly growing organization shaping the future of the nuclear sector. Please submit your CV and covering letter to by the deadline of noon on 16 September 2025.
A sector-leading manufacturer of complex engineered components supplied to the aerospace, defence, and high technology industries is seeking a Lead Engineer to join their team. You will play a pivotal role in defining technical requirements, developing manufacturing processes, designing new machinery & tooling and ensuring successful New Product Introduction. Key Responsibilities Manage a team of Engineers proving guidance, direction and coaching. Develop existing and new tooling designs manufacturing methods to improve efficiency and product quality. Investigate non-conformances with a view to establishing the root cause and implementing changes. Provide subject matter expertise to the customer and develop solid long-term relationships. Define, manage, and validate product requirements and acceptance criteria. Be the company customer point for NPI & manufacturing programs. Produce Engineering drawings. Work closely with multi-disciplinary teams, stakeholders, and external partners to drive system design, development, and delivery. Ensure adherence to safety, environmental, and regulatory standards throughout the engineering lifecycle. The Person Degree or equivalent qualification in a STEM-related discipline. A good understanding of precision engineering processes (machining preferred but not essential). The ability to lead mechanical design work packages. Previous experience working in a highly regulated sector (aerospace and/or defence preferred). Demonstrable experience in applying mechanical engineering for various products along with different stages of a product lifecycle. Experience in using Solidworks or other 3D modelling software. Strong communication skills, both written and verbal with the ability to influence across the business.
Sep 04, 2025
Full time
A sector-leading manufacturer of complex engineered components supplied to the aerospace, defence, and high technology industries is seeking a Lead Engineer to join their team. You will play a pivotal role in defining technical requirements, developing manufacturing processes, designing new machinery & tooling and ensuring successful New Product Introduction. Key Responsibilities Manage a team of Engineers proving guidance, direction and coaching. Develop existing and new tooling designs manufacturing methods to improve efficiency and product quality. Investigate non-conformances with a view to establishing the root cause and implementing changes. Provide subject matter expertise to the customer and develop solid long-term relationships. Define, manage, and validate product requirements and acceptance criteria. Be the company customer point for NPI & manufacturing programs. Produce Engineering drawings. Work closely with multi-disciplinary teams, stakeholders, and external partners to drive system design, development, and delivery. Ensure adherence to safety, environmental, and regulatory standards throughout the engineering lifecycle. The Person Degree or equivalent qualification in a STEM-related discipline. A good understanding of precision engineering processes (machining preferred but not essential). The ability to lead mechanical design work packages. Previous experience working in a highly regulated sector (aerospace and/or defence preferred). Demonstrable experience in applying mechanical engineering for various products along with different stages of a product lifecycle. Experience in using Solidworks or other 3D modelling software. Strong communication skills, both written and verbal with the ability to influence across the business.
Job Title: Full Stack Engineer with Node.js and Python Duration: until 30 January 2026 Location: Remote working - Onsite required in Croydon 2 days per month Clearance: Active SC clearance required Rate: 475 per day - PAYE via Umbrella only ACTIVE SC CLEARANCE IS A REQUIREMENT FOR THIS ROLE Tech Stack Requirements: Expertise in ReactJs, TypeScript, JavaScript, NodeJS, Python, Postgres Familiarity with Docker, Kubernetes, AWS, CI/CD Responsibilities: Be a technical specialist for one or more products or services Develop features, resolve bugs, elaborate stories, write and improve documentation Manage and take part in in-hours support (triage, incidents, bugfixes) Lead the design of components or modules in a product or service Work with Engineering Team Lead to provide a clear technical vision and roadmap for product/services Show (by example) and explain/teach modern development methods and SAS approaches Pair with other developers (or swarm) for feature development Take part in the release process Mentor Engineers and Associate Engineers
Sep 04, 2025
Contractor
Job Title: Full Stack Engineer with Node.js and Python Duration: until 30 January 2026 Location: Remote working - Onsite required in Croydon 2 days per month Clearance: Active SC clearance required Rate: 475 per day - PAYE via Umbrella only ACTIVE SC CLEARANCE IS A REQUIREMENT FOR THIS ROLE Tech Stack Requirements: Expertise in ReactJs, TypeScript, JavaScript, NodeJS, Python, Postgres Familiarity with Docker, Kubernetes, AWS, CI/CD Responsibilities: Be a technical specialist for one or more products or services Develop features, resolve bugs, elaborate stories, write and improve documentation Manage and take part in in-hours support (triage, incidents, bugfixes) Lead the design of components or modules in a product or service Work with Engineering Team Lead to provide a clear technical vision and roadmap for product/services Show (by example) and explain/teach modern development methods and SAS approaches Pair with other developers (or swarm) for feature development Take part in the release process Mentor Engineers and Associate Engineers
Electrical Engineer (Jr to Sr - Product Development) - Kirkcaldy Hybrid - 35-50K Lorien's client, a leading global manufacturer, is seeking an Engineer with a proven background in electrical design and new product development to join their growing team at their UK headquarters in Fife. You'll be working closely with a dedicated team and have the opportunity to be at the heart of their operations as you ensure their offerings are best in class and support the overall product roadmap as a key team member. They are open to applications from Junior to Senior ranking individuals alike, and so if the following sounds good to you, apply now for immediate consideration! Outline: Taking the reins on new products from researching through to designing, developing, testing and more Working with a multidisciplinary team to create and contribute to the product roadmap as you go, identify areas for improvement within the product line and tech used, and ensure all teams are on the same page Draft new product ideas and assess them against internal standards and feasibility, develop prototypes, perform relevant approval testing, and knowledge-transfer both within the local tech function and a wider global reach with other key teams overseas Contribute towards the improvement of tooling, testing approaches, analysis methods and more Own relevant projects as they arise, adhering to agreed internal processes and procedures What we're looking for: Ideally a degree or similar certification in Electrical Engineering or similar Proven skills working with new products from research/design through to prototyping, development, test and implementation Strong grasp of relevant electrical design and testing tooling Ability to work within a cross-functional R&D/manufacturing style setting Ability to bring new ideas to the table and take them from concept to product So why join? Join a stable, international organisation with a clear commitment to innovation and quality Be a part of a collaborative technical team that values input and drives continuous improvement Based at a modern manufacturing HQ with a supportive team around you If this sounds like a great next step for you and your career, and you'd like to know more, apply now for immediate consideration and let's have a chat. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Sep 04, 2025
Full time
Electrical Engineer (Jr to Sr - Product Development) - Kirkcaldy Hybrid - 35-50K Lorien's client, a leading global manufacturer, is seeking an Engineer with a proven background in electrical design and new product development to join their growing team at their UK headquarters in Fife. You'll be working closely with a dedicated team and have the opportunity to be at the heart of their operations as you ensure their offerings are best in class and support the overall product roadmap as a key team member. They are open to applications from Junior to Senior ranking individuals alike, and so if the following sounds good to you, apply now for immediate consideration! Outline: Taking the reins on new products from researching through to designing, developing, testing and more Working with a multidisciplinary team to create and contribute to the product roadmap as you go, identify areas for improvement within the product line and tech used, and ensure all teams are on the same page Draft new product ideas and assess them against internal standards and feasibility, develop prototypes, perform relevant approval testing, and knowledge-transfer both within the local tech function and a wider global reach with other key teams overseas Contribute towards the improvement of tooling, testing approaches, analysis methods and more Own relevant projects as they arise, adhering to agreed internal processes and procedures What we're looking for: Ideally a degree or similar certification in Electrical Engineering or similar Proven skills working with new products from research/design through to prototyping, development, test and implementation Strong grasp of relevant electrical design and testing tooling Ability to work within a cross-functional R&D/manufacturing style setting Ability to bring new ideas to the table and take them from concept to product So why join? Join a stable, international organisation with a clear commitment to innovation and quality Be a part of a collaborative technical team that values input and drives continuous improvement Based at a modern manufacturing HQ with a supportive team around you If this sounds like a great next step for you and your career, and you'd like to know more, apply now for immediate consideration and let's have a chat. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Our client are a top tier consultancy looking for an Automation Tester on a 6 months contract. Candidates need to have an Active SC: Key Responsibilities: Develop and deliver comprehensive, robust, and reliable automated test frameworks and suites to cover business requirements. Identify and resolve defects or issues preventing the delivery of Test Engineering activities. Maintain full traceability of defects, tests, and requirements. Design, build, and maintain an effective test infrastructure. Create and maintain documentation within the test automation code base. Stay updated with the latest technical test tools and apply them where beneficial. Review and update the test suite to reflect current best practices and reduce technical debt. Develop and maintain reusable libraries and services. Communicate and share technical resources, knowledge, and lessons learned with other teams. Contribute to the production of test approaches and reporting mechanisms agreed upon with senior stakeholders. Ensure usability, accessibility, security, stability, and capacity are Embedded in the development of citizen services. Collaborate with other teams in the Software Development Lifecycle to drive technical solutions. Apply Agile principles in practice and use Agile tools intelligently. Design and build technical setups and working methods for continuous integration, delivery, and deployment practices. Review test practices and implement improvements. Participate in community discussions around the latest technology trends, tools, and best practices within Test Engineering. Commit to continuous personal development, learning, and training. Provide coaching and mentoring to Test Engineering team members. Support recruitment-related activities when required. Technical Skills Required Key Criteria: Accessibility Testing - Strong experience as a QA on accessibility testing to GOV.uk standard Pattern Identification and Problem Solving: Identify simple patterns and trends. Investigate problems and opportunities in existing processes and recommend solutions. Work with stakeholders to identify objectives and potential benefits. Test Conditions and Risk Analysis: Review requirements and specifications to define test conditions. Identify issues and risks associated with work. Analyse and report test activities and results. Non-Functional Test Case Design: Design and execute non-functional test cases using standard testing techniques. Develop different business scenarios for features in collaboration with the team. Agile Principles and Tools: Apply Agile principles in practice. Provide a clear, open, and transparent framework for team delivery. Use Agile tools intelligently and visualize the team's work. Adapt, reflect, and see outside of the process. Knowledge and Experience: Select and support the most appropriate tool or method. Understand and apply core technical concepts related to the role.
Sep 04, 2025
Contractor
Our client are a top tier consultancy looking for an Automation Tester on a 6 months contract. Candidates need to have an Active SC: Key Responsibilities: Develop and deliver comprehensive, robust, and reliable automated test frameworks and suites to cover business requirements. Identify and resolve defects or issues preventing the delivery of Test Engineering activities. Maintain full traceability of defects, tests, and requirements. Design, build, and maintain an effective test infrastructure. Create and maintain documentation within the test automation code base. Stay updated with the latest technical test tools and apply them where beneficial. Review and update the test suite to reflect current best practices and reduce technical debt. Develop and maintain reusable libraries and services. Communicate and share technical resources, knowledge, and lessons learned with other teams. Contribute to the production of test approaches and reporting mechanisms agreed upon with senior stakeholders. Ensure usability, accessibility, security, stability, and capacity are Embedded in the development of citizen services. Collaborate with other teams in the Software Development Lifecycle to drive technical solutions. Apply Agile principles in practice and use Agile tools intelligently. Design and build technical setups and working methods for continuous integration, delivery, and deployment practices. Review test practices and implement improvements. Participate in community discussions around the latest technology trends, tools, and best practices within Test Engineering. Commit to continuous personal development, learning, and training. Provide coaching and mentoring to Test Engineering team members. Support recruitment-related activities when required. Technical Skills Required Key Criteria: Accessibility Testing - Strong experience as a QA on accessibility testing to GOV.uk standard Pattern Identification and Problem Solving: Identify simple patterns and trends. Investigate problems and opportunities in existing processes and recommend solutions. Work with stakeholders to identify objectives and potential benefits. Test Conditions and Risk Analysis: Review requirements and specifications to define test conditions. Identify issues and risks associated with work. Analyse and report test activities and results. Non-Functional Test Case Design: Design and execute non-functional test cases using standard testing techniques. Develop different business scenarios for features in collaboration with the team. Agile Principles and Tools: Apply Agile principles in practice. Provide a clear, open, and transparent framework for team delivery. Use Agile tools intelligently and visualize the team's work. Adapt, reflect, and see outside of the process. Knowledge and Experience: Select and support the most appropriate tool or method. Understand and apply core technical concepts related to the role.
I am looking to speak with experienced Senior Design Managers based in London. This is a unique opportunity to join Tier 1 Main Contractor in London, who work on exciting and challenging projects. This main contractor is looking Senior Design Manager to work on £220million healthcare project in London with a key client. They are looking for someone who can manage the overall design from tender stage through to completion. The business unit work on projects up to £250million mainly across residential, mix use and commercial sector. They have group turnover of £1 Billion and grown to become prestigious Main Contractor with excellent pipeline of work across private and public sector. They offer excellent training and development to upskill and progress their career. They have great fun and family feel culture. They are technology focused and use modern methods of construction to deliver a high-quality product to their clients. I am ideally looking for someone with good experience working on Healthcare projects with a main contractor. Overview of responsibilities: Provide technical advice on proposal documents, presentations and meetings Conduct audits and technical reviews of tender information, subcontractor proposals Monitor and report against compliance requirements during adjudications Develop detailed understanding of clients ideas, expectations and requirements, breaking down technical jargon and ensuring clients ideas and needs lead to concepts and detailed designs Prepare and develop employer requirements and robust contractor proposals Identify and evaluate design risk to ensure ease of buildability thereby reducing/eliminating company risk/claims Identify any scope gaps thereby mitigating risks and developing value engineering/programme opportunities Review subcontractors proposals to identify and develop value engineering opportunities Produce detailed design programmes and design delivery schedules Ensure consistency of design management process on schemes, reviewing protocols, reviewing design programmes, design specification, and design scopes Contribute to commercial and contractual documentation, negotiations and disputes Ensure design delivery is in line with procurement strategy, project cost plan and value engineering targets Ensure compliance of design brief and managing change control process Recommend and initiate changes to project delivery plans, develop new project management and operating tools and processes Ensure effective procurement of design services Manage consultant/subcontractor teams ensuring works are delivered according to specification Ensure the compilation of detail requirements and responsibilities for technical handover documentation including H&S file, building manuals, Building User Guide Required Skills & Qualifications Construction related degree, ideally within design management (HNC / HND minimum). Design management experience with Main Contractor is essential Proven track record of delivering schemes from cradle to grave Experience working on healthcare or life science projects over £80million would be very desirable
Sep 04, 2025
Full time
I am looking to speak with experienced Senior Design Managers based in London. This is a unique opportunity to join Tier 1 Main Contractor in London, who work on exciting and challenging projects. This main contractor is looking Senior Design Manager to work on £220million healthcare project in London with a key client. They are looking for someone who can manage the overall design from tender stage through to completion. The business unit work on projects up to £250million mainly across residential, mix use and commercial sector. They have group turnover of £1 Billion and grown to become prestigious Main Contractor with excellent pipeline of work across private and public sector. They offer excellent training and development to upskill and progress their career. They have great fun and family feel culture. They are technology focused and use modern methods of construction to deliver a high-quality product to their clients. I am ideally looking for someone with good experience working on Healthcare projects with a main contractor. Overview of responsibilities: Provide technical advice on proposal documents, presentations and meetings Conduct audits and technical reviews of tender information, subcontractor proposals Monitor and report against compliance requirements during adjudications Develop detailed understanding of clients ideas, expectations and requirements, breaking down technical jargon and ensuring clients ideas and needs lead to concepts and detailed designs Prepare and develop employer requirements and robust contractor proposals Identify and evaluate design risk to ensure ease of buildability thereby reducing/eliminating company risk/claims Identify any scope gaps thereby mitigating risks and developing value engineering/programme opportunities Review subcontractors proposals to identify and develop value engineering opportunities Produce detailed design programmes and design delivery schedules Ensure consistency of design management process on schemes, reviewing protocols, reviewing design programmes, design specification, and design scopes Contribute to commercial and contractual documentation, negotiations and disputes Ensure design delivery is in line with procurement strategy, project cost plan and value engineering targets Ensure compliance of design brief and managing change control process Recommend and initiate changes to project delivery plans, develop new project management and operating tools and processes Ensure effective procurement of design services Manage consultant/subcontractor teams ensuring works are delivered according to specification Ensure the compilation of detail requirements and responsibilities for technical handover documentation including H&S file, building manuals, Building User Guide Required Skills & Qualifications Construction related degree, ideally within design management (HNC / HND minimum). Design management experience with Main Contractor is essential Proven track record of delivering schemes from cradle to grave Experience working on healthcare or life science projects over £80million would be very desirable
Job Title : Senior/Principal Naval Architect Location : Barrow-in-Furness, Bristol, Portsmouth or Frimley. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Conducting analysis and evaluation of submarine platforms manoeuvring performance from concept design to in-service support Undertaking development, verification and validation of mathematical manoeuvring model using physical model test data Generation of Safe Manoeuvring Envelopes and supporting associated operator guidance You will be working with enterprise partners to develop the modelling capability, processes and toolsets for use to support our major programmes Working collaboratively with other naval architecture teams, systems teams, Active Vehicle Control system teams and propulsion engineers as well as customers and suppliers to deliver innovative & safe submarine solutions Supporting & conducting hydrodynamic sea trials such as depth and heading control, including test form development and post-trial data analysis Your skills and experiences: Essential: Experience in the generation of ship or submarine manoeuvring modelling Advanced numeracy and analytical skills A strong understanding of hydrodynamic principles and methods Degree in Naval Architecture, Aeronautical Engineering, Mathematics, Physics or equivalent experience Desirable: Hydrodynamic/aerodynamic design and evaluation experience Physical testing experience Chartered Engineer or working towards/ability to achieve Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Vehicle Control team: As a Principal/Senior Naval Architect within the Vehicle Control team, you will be working alongside a team of experts within Naval Architecture and the Whole Boat Design Team in one of the largest and fastest growing Naval Architecture Departments in the UK. You will be working on some of the most complex ship design and build programmes ever undertaken to deliver cutting edge submarines to the Royal Navy and Royal Australian Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title : Senior/Principal Naval Architect Location : Barrow-in-Furness, Bristol, Portsmouth or Frimley. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Conducting analysis and evaluation of submarine platforms manoeuvring performance from concept design to in-service support Undertaking development, verification and validation of mathematical manoeuvring model using physical model test data Generation of Safe Manoeuvring Envelopes and supporting associated operator guidance You will be working with enterprise partners to develop the modelling capability, processes and toolsets for use to support our major programmes Working collaboratively with other naval architecture teams, systems teams, Active Vehicle Control system teams and propulsion engineers as well as customers and suppliers to deliver innovative & safe submarine solutions Supporting & conducting hydrodynamic sea trials such as depth and heading control, including test form development and post-trial data analysis Your skills and experiences: Essential: Experience in the generation of ship or submarine manoeuvring modelling Advanced numeracy and analytical skills A strong understanding of hydrodynamic principles and methods Degree in Naval Architecture, Aeronautical Engineering, Mathematics, Physics or equivalent experience Desirable: Hydrodynamic/aerodynamic design and evaluation experience Physical testing experience Chartered Engineer or working towards/ability to achieve Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Vehicle Control team: As a Principal/Senior Naval Architect within the Vehicle Control team, you will be working alongside a team of experts within Naval Architecture and the Whole Boat Design Team in one of the largest and fastest growing Naval Architecture Departments in the UK. You will be working on some of the most complex ship design and build programmes ever undertaken to deliver cutting edge submarines to the Royal Navy and Royal Australian Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Systems Engineering Consultant - Defence Location - Bristol Salary: £35K-£55K negotiable plus benefits, pension (7% contribution), 25 days holiday & life insurance As a Systems Engineering Consultant, you will be delivering analytical and systems engineering support to help our clients design systems, optimise solutions, and make better decisions. The Role Systems Engineering Consultant This will include working with clients to analyse their problems; capture requirements; create architectures; identify potential options; assess solutions using systems analysis methods; and make recommendations based on robust evidence. Projects will typically be in support of research and procurement activities in the defence and security sector but may include work in other sectors and government departments. Responsibilities will include: Delivering/ leading technical consulting projects. Using systems engineering to tackle real world problems, applying tools and techniques, and developing novel approaches where required. Applying and developing systems engineering methods, tools and techniques, including developing and applying novel approaches where required. Working organically in customer teams to deliver high quality systems engineering advice & artefacts. Building new relationships and maintaining current customer relationships. Assisting/ leading in identifying and winning work for a new and growing consultancy. About You The successful candidate must be able to demonstrate the following essential and desirable attributes: Essential Educated to degree level, or equivalent relevant experience. Ability to use and apply both soft and hard systems engineering techniques to support system design/ development, business decision making, policy development, and/or research. Development, application, and delivery of systems engineering methods, tools and artefacts. Knowledge and Understanding of the Systems Engineering Lifecycle. Building and maintaining client and stakeholder relationships. Authoring technical reports, developing systems engineering artefacts, and presenting to customers. Experience in one or more of the following systems engineering technical specialisms: Requirements elicitation and derivation Enterprise & System Architecting Verification & Validation/ Test & Evaluation System Integration Technology & Capability Roadmapping Capability/ Effects-based Engineering Option Analysis/ Solution trade-off studies Risk management and analysis Workshop design and facilitation Desirable Experience of using specialist Systems Engineering Software (e.g. Sparx EA) to develop SE Artefacts. Experience of delivering projects via MBSE. Experience of working in UK Defence or UK Government Departments utilising Systems Engineering. Membership of relevant professional institution and a desire for further professional development. Systems Engineering Consultant - Defence
Sep 04, 2025
Full time
Systems Engineering Consultant - Defence Location - Bristol Salary: £35K-£55K negotiable plus benefits, pension (7% contribution), 25 days holiday & life insurance As a Systems Engineering Consultant, you will be delivering analytical and systems engineering support to help our clients design systems, optimise solutions, and make better decisions. The Role Systems Engineering Consultant This will include working with clients to analyse their problems; capture requirements; create architectures; identify potential options; assess solutions using systems analysis methods; and make recommendations based on robust evidence. Projects will typically be in support of research and procurement activities in the defence and security sector but may include work in other sectors and government departments. Responsibilities will include: Delivering/ leading technical consulting projects. Using systems engineering to tackle real world problems, applying tools and techniques, and developing novel approaches where required. Applying and developing systems engineering methods, tools and techniques, including developing and applying novel approaches where required. Working organically in customer teams to deliver high quality systems engineering advice & artefacts. Building new relationships and maintaining current customer relationships. Assisting/ leading in identifying and winning work for a new and growing consultancy. About You The successful candidate must be able to demonstrate the following essential and desirable attributes: Essential Educated to degree level, or equivalent relevant experience. Ability to use and apply both soft and hard systems engineering techniques to support system design/ development, business decision making, policy development, and/or research. Development, application, and delivery of systems engineering methods, tools and artefacts. Knowledge and Understanding of the Systems Engineering Lifecycle. Building and maintaining client and stakeholder relationships. Authoring technical reports, developing systems engineering artefacts, and presenting to customers. Experience in one or more of the following systems engineering technical specialisms: Requirements elicitation and derivation Enterprise & System Architecting Verification & Validation/ Test & Evaluation System Integration Technology & Capability Roadmapping Capability/ Effects-based Engineering Option Analysis/ Solution trade-off studies Risk management and analysis Workshop design and facilitation Desirable Experience of using specialist Systems Engineering Software (e.g. Sparx EA) to develop SE Artefacts. Experience of delivering projects via MBSE. Experience of working in UK Defence or UK Government Departments utilising Systems Engineering. Membership of relevant professional institution and a desire for further professional development. Systems Engineering Consultant - Defence
Adecco is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Simulation Engineer Crewe Contract until 23/12/2025 (12 Month rolling contract) Day Rate Outside IR35 Purpose of the job Adecco working in partnership with Bentley Motors are seeking a Simulation Engineer to support engineers and feature owners, to create virtual models of vehicles and lighting components for simulation. Complete Analysis and reports of results and findings. Prepare demonstrations to show how the lighting in and around the vehicle will behave. Position in organisation Light Simulation Engineer part of the Light Simulation & Photometry Team EE/L, within Electrical Engineering Department. Reporting to the Technical Manager and the Head of Lighting. Scope of Job 1: Simulation Model Creation 2: Running and Analysing Simulations 3: Generation of Simulation Reports 4: Maintaining Materials library 5: Development of Simulation Techniques 6: Cross Functional Communication Key Responsibilities Customer Simulation Requirements Receipt and acknowledgement of Simulation request. Verification of customer requirements and Measurement Specifications. Management of customer requirements & Expectations and deadlines Communication / information sharing & packaging reviews with Research and developments teams, including Electrical, Concepts, Styling & Design, Trim, and other major interfaces Data preparation and Model Creation & Simulation Launch Preparation and cleaning of 3D data. Application of physically correct materials Creation of sensors & implementation of design tables Mesh adjustment Launching Simulations and use of HPC Use of active simulation for design Data Analysis, Report & Demonstration Compilation Detailed Analysis of Simulation Results, Including but not exhaustive Occupant Vision and Visual Ergonomics Lighting Concept strategy Interior Lighting (Internal reflections, Sunlight effects, core functional lighting, Ambient lighting, stowage lighting, Displays HUD, Cube simulations) Exterior Lighting (Front and rear lighting experience and performance. Impacts to customers and environment lit and unlit) Lighting effects Legal verification Vehicle benchmarking Root cause analysis of Errors and defects discovered Implications or impact introduced by the system / components into interfacing systems i.e. Interior Trim or BiW must be identified with potential solutions Identification of any packaging constraints & style hard points Scripting & Macro Creation Creation and Compilation of test summaries and of comprehensive & detailed test reports. Support Feature owners, Suppliers, and internal customers with understanding measurement results and analysis. Demonstration presentation of Simulation results Maintenance and Customer support Maintain material measurement library. Maintain process documentation for simulation methods/techniques Correlation of simulation results to real world situation Support customers understanding of simulation methods and techniques Experience Experience and knowledge of delivering complete vehicle optical simulation and vehicle integration of illuminated components with ergonomic eye point considerations on the interior & exterior of the vehicle. Excellent knowledge is required of: Catia v5, Softwares: Speos for Catia Ansys Speos AVX (awareness) Prita MS Office (including scripting in Visual basic) Detailed Analysis of simulation results Complete Vehicle component integration Good understanding of materials and behaviour with light Other Requirements Reading Technical Drawings. Ability to write clear technical reports Understanding of electrical circuit diagrams, behaviour and control of LEDs and system integration onto vehicles. Data management and revision control Appreciation of vehicle communication networks including CAN and LIN communication buses. Working to quality standards and processes Experience with Microsoft office programs including word, power point and excel Note - if you do not hear back within 5 working days of applying, please assume you have been unsuccessful on this occasion
Sep 04, 2025
Contractor
Adecco is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Simulation Engineer Crewe Contract until 23/12/2025 (12 Month rolling contract) Day Rate Outside IR35 Purpose of the job Adecco working in partnership with Bentley Motors are seeking a Simulation Engineer to support engineers and feature owners, to create virtual models of vehicles and lighting components for simulation. Complete Analysis and reports of results and findings. Prepare demonstrations to show how the lighting in and around the vehicle will behave. Position in organisation Light Simulation Engineer part of the Light Simulation & Photometry Team EE/L, within Electrical Engineering Department. Reporting to the Technical Manager and the Head of Lighting. Scope of Job 1: Simulation Model Creation 2: Running and Analysing Simulations 3: Generation of Simulation Reports 4: Maintaining Materials library 5: Development of Simulation Techniques 6: Cross Functional Communication Key Responsibilities Customer Simulation Requirements Receipt and acknowledgement of Simulation request. Verification of customer requirements and Measurement Specifications. Management of customer requirements & Expectations and deadlines Communication / information sharing & packaging reviews with Research and developments teams, including Electrical, Concepts, Styling & Design, Trim, and other major interfaces Data preparation and Model Creation & Simulation Launch Preparation and cleaning of 3D data. Application of physically correct materials Creation of sensors & implementation of design tables Mesh adjustment Launching Simulations and use of HPC Use of active simulation for design Data Analysis, Report & Demonstration Compilation Detailed Analysis of Simulation Results, Including but not exhaustive Occupant Vision and Visual Ergonomics Lighting Concept strategy Interior Lighting (Internal reflections, Sunlight effects, core functional lighting, Ambient lighting, stowage lighting, Displays HUD, Cube simulations) Exterior Lighting (Front and rear lighting experience and performance. Impacts to customers and environment lit and unlit) Lighting effects Legal verification Vehicle benchmarking Root cause analysis of Errors and defects discovered Implications or impact introduced by the system / components into interfacing systems i.e. Interior Trim or BiW must be identified with potential solutions Identification of any packaging constraints & style hard points Scripting & Macro Creation Creation and Compilation of test summaries and of comprehensive & detailed test reports. Support Feature owners, Suppliers, and internal customers with understanding measurement results and analysis. Demonstration presentation of Simulation results Maintenance and Customer support Maintain material measurement library. Maintain process documentation for simulation methods/techniques Correlation of simulation results to real world situation Support customers understanding of simulation methods and techniques Experience Experience and knowledge of delivering complete vehicle optical simulation and vehicle integration of illuminated components with ergonomic eye point considerations on the interior & exterior of the vehicle. Excellent knowledge is required of: Catia v5, Softwares: Speos for Catia Ansys Speos AVX (awareness) Prita MS Office (including scripting in Visual basic) Detailed Analysis of simulation results Complete Vehicle component integration Good understanding of materials and behaviour with light Other Requirements Reading Technical Drawings. Ability to write clear technical reports Understanding of electrical circuit diagrams, behaviour and control of LEDs and system integration onto vehicles. Data management and revision control Appreciation of vehicle communication networks including CAN and LIN communication buses. Working to quality standards and processes Experience with Microsoft office programs including word, power point and excel Note - if you do not hear back within 5 working days of applying, please assume you have been unsuccessful on this occasion
Job Title : Senior/Principal Naval Architect Location : Barrow-in-Furness, Bristol, Portsmouth or Frimley. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Conducting analysis and evaluation of submarine platforms manoeuvring performance from concept design to in-service support Undertaking development, verification and validation of mathematical manoeuvring model using physical model test data Generation of Safe Manoeuvring Envelopes and supporting associated operator guidance You will be working with enterprise partners to develop the modelling capability, processes and toolsets for use to support our major programmes Working collaboratively with other naval architecture teams, systems teams, Active Vehicle Control system teams and propulsion engineers as well as customers and suppliers to deliver innovative & safe submarine solutions Supporting & conducting hydrodynamic sea trials such as depth and heading control, including test form development and post-trial data analysis Your skills and experiences: Essential: Experience in the generation of ship or submarine manoeuvring modelling Advanced numeracy and analytical skills A strong understanding of hydrodynamic principles and methods Degree in Naval Architecture, Aeronautical Engineering, Mathematics, Physics or equivalent experience Desirable: Hydrodynamic/aerodynamic design and evaluation experience Physical testing experience Chartered Engineer or working towards/ability to achieve Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Vehicle Control team: As a Principal/Senior Naval Architect within the Vehicle Control team, you will be working alongside a team of experts within Naval Architecture and the Whole Boat Design Team in one of the largest and fastest growing Naval Architecture Departments in the UK. You will be working on some of the most complex ship design and build programmes ever undertaken to deliver cutting edge submarines to the Royal Navy and Royal Australian Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title : Senior/Principal Naval Architect Location : Barrow-in-Furness, Bristol, Portsmouth or Frimley. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Conducting analysis and evaluation of submarine platforms manoeuvring performance from concept design to in-service support Undertaking development, verification and validation of mathematical manoeuvring model using physical model test data Generation of Safe Manoeuvring Envelopes and supporting associated operator guidance You will be working with enterprise partners to develop the modelling capability, processes and toolsets for use to support our major programmes Working collaboratively with other naval architecture teams, systems teams, Active Vehicle Control system teams and propulsion engineers as well as customers and suppliers to deliver innovative & safe submarine solutions Supporting & conducting hydrodynamic sea trials such as depth and heading control, including test form development and post-trial data analysis Your skills and experiences: Essential: Experience in the generation of ship or submarine manoeuvring modelling Advanced numeracy and analytical skills A strong understanding of hydrodynamic principles and methods Degree in Naval Architecture, Aeronautical Engineering, Mathematics, Physics or equivalent experience Desirable: Hydrodynamic/aerodynamic design and evaluation experience Physical testing experience Chartered Engineer or working towards/ability to achieve Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Vehicle Control team: As a Principal/Senior Naval Architect within the Vehicle Control team, you will be working alongside a team of experts within Naval Architecture and the Whole Boat Design Team in one of the largest and fastest growing Naval Architecture Departments in the UK. You will be working on some of the most complex ship design and build programmes ever undertaken to deliver cutting edge submarines to the Royal Navy and Royal Australian Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Jonathan Lee Recruitment Ltd
Warndon, Worcestershire
Graduate/Junior Applications Engineer - Worcester - £25,000 to £36,000 per annum plus benefits This Graduate/Junior Applications Engineer role offers the perfect opportunity to develop your skills in software development, automation, and engineering within a dynamic and innovative environment. With a structured training programme designed to enhance your expertise, this position is ideal for aspiring engineers eager to work on cutting-edge projects while gaining exposure to a wide variety of engineering environments, products, and systems. Candidates are expected to have a strong engineering (electrical/control systems) background and Windows based coding experience (ideally C# or Visual Basic), allowing development of new code, and modification of existing code for bespoke customer applications and core products. Some hands on electrical experience may also be required. What You Will Do: Develop and modify C# control software using Visual Studio and a bespoke API for automation and custom software solutions. Support legacy systems in VB6 and assist worldwide customers and engineers remotely with fault-finding and integrating new functionalities. Work on-site occasionally to provide hands-on support and ensure seamless system integration and customer satisfaction. Collaborate with design engineers to provide input into hardware design and develop core product software. Interface with third-party equipment using C# language and protocols such as Ethernet, Serial, Ethercat, CAN, and Profibus. Analyse engineering systems to advise on automation methods and post-test diagnostics for fault rectification within complex engineering systems. What You Will Bring: A strong engineering background with excellent fault-finding abilities and a proactive approach to learning new concepts. Proficiency in C# and Visual Studio, with experience in other programming languages considered a plus. A degree in electrical, mechanical, robotics, mechatronics, or automation engineering is highly advantageous. Excellent communication skills, both written and verbal, along with logical thinking and effective time management. A full UK driving licence with the ability to travel occasionally, including potential overseas trips. As a Graduate/Junior Applications Engineer, you will contribute to the company's mission of delivering world-class engineering solutions tailored to the unique demands of the industry. This company prides itself on its innovative approach, combining process knowledge, subject matter expertise, and integration experience to deliver exceptional results. You will play a vital role in supporting their vision and delivering excellence in engineering and automation. Interested?: Don't miss this chance to grow your career in engineering while working on exciting and varied projects. Apply now to become a valued part of this company's innovative team and take the first step towards a rewarding professional journey! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Sep 04, 2025
Full time
Graduate/Junior Applications Engineer - Worcester - £25,000 to £36,000 per annum plus benefits This Graduate/Junior Applications Engineer role offers the perfect opportunity to develop your skills in software development, automation, and engineering within a dynamic and innovative environment. With a structured training programme designed to enhance your expertise, this position is ideal for aspiring engineers eager to work on cutting-edge projects while gaining exposure to a wide variety of engineering environments, products, and systems. Candidates are expected to have a strong engineering (electrical/control systems) background and Windows based coding experience (ideally C# or Visual Basic), allowing development of new code, and modification of existing code for bespoke customer applications and core products. Some hands on electrical experience may also be required. What You Will Do: Develop and modify C# control software using Visual Studio and a bespoke API for automation and custom software solutions. Support legacy systems in VB6 and assist worldwide customers and engineers remotely with fault-finding and integrating new functionalities. Work on-site occasionally to provide hands-on support and ensure seamless system integration and customer satisfaction. Collaborate with design engineers to provide input into hardware design and develop core product software. Interface with third-party equipment using C# language and protocols such as Ethernet, Serial, Ethercat, CAN, and Profibus. Analyse engineering systems to advise on automation methods and post-test diagnostics for fault rectification within complex engineering systems. What You Will Bring: A strong engineering background with excellent fault-finding abilities and a proactive approach to learning new concepts. Proficiency in C# and Visual Studio, with experience in other programming languages considered a plus. A degree in electrical, mechanical, robotics, mechatronics, or automation engineering is highly advantageous. Excellent communication skills, both written and verbal, along with logical thinking and effective time management. A full UK driving licence with the ability to travel occasionally, including potential overseas trips. As a Graduate/Junior Applications Engineer, you will contribute to the company's mission of delivering world-class engineering solutions tailored to the unique demands of the industry. This company prides itself on its innovative approach, combining process knowledge, subject matter expertise, and integration experience to deliver exceptional results. You will play a vital role in supporting their vision and delivering excellence in engineering and automation. Interested?: Don't miss this chance to grow your career in engineering while working on exciting and varied projects. Apply now to become a valued part of this company's innovative team and take the first step towards a rewarding professional journey! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Job Title : Senior/Principal Naval Architect Location : Barrow-in-Furness, Bristol, Portsmouth or Frimley. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Conducting analysis and evaluation of submarine platforms manoeuvring performance from concept design to in-service support Undertaking development, verification and validation of mathematical manoeuvring model using physical model test data Generation of Safe Manoeuvring Envelopes and supporting associated operator guidance You will be working with enterprise partners to develop the modelling capability, processes and toolsets for use to support our major programmes Working collaboratively with other naval architecture teams, systems teams, Active Vehicle Control system teams and propulsion engineers as well as customers and suppliers to deliver innovative & safe submarine solutions Supporting & conducting hydrodynamic sea trials such as depth and heading control, including test form development and post-trial data analysis Your skills and experiences: Essential: Experience in the generation of ship or submarine manoeuvring modelling Advanced numeracy and analytical skills A strong understanding of hydrodynamic principles and methods Degree in Naval Architecture, Aeronautical Engineering, Mathematics, Physics or equivalent experience Desirable: Hydrodynamic/aerodynamic design and evaluation experience Physical testing experience Chartered Engineer or working towards/ability to achieve Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Vehicle Control team: As a Principal/Senior Naval Architect within the Vehicle Control team, you will be working alongside a team of experts within Naval Architecture and the Whole Boat Design Team in one of the largest and fastest growing Naval Architecture Departments in the UK. You will be working on some of the most complex ship design and build programmes ever undertaken to deliver cutting edge submarines to the Royal Navy and Royal Australian Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title : Senior/Principal Naval Architect Location : Barrow-in-Furness, Bristol, Portsmouth or Frimley. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Conducting analysis and evaluation of submarine platforms manoeuvring performance from concept design to in-service support Undertaking development, verification and validation of mathematical manoeuvring model using physical model test data Generation of Safe Manoeuvring Envelopes and supporting associated operator guidance You will be working with enterprise partners to develop the modelling capability, processes and toolsets for use to support our major programmes Working collaboratively with other naval architecture teams, systems teams, Active Vehicle Control system teams and propulsion engineers as well as customers and suppliers to deliver innovative & safe submarine solutions Supporting & conducting hydrodynamic sea trials such as depth and heading control, including test form development and post-trial data analysis Your skills and experiences: Essential: Experience in the generation of ship or submarine manoeuvring modelling Advanced numeracy and analytical skills A strong understanding of hydrodynamic principles and methods Degree in Naval Architecture, Aeronautical Engineering, Mathematics, Physics or equivalent experience Desirable: Hydrodynamic/aerodynamic design and evaluation experience Physical testing experience Chartered Engineer or working towards/ability to achieve Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Vehicle Control team: As a Principal/Senior Naval Architect within the Vehicle Control team, you will be working alongside a team of experts within Naval Architecture and the Whole Boat Design Team in one of the largest and fastest growing Naval Architecture Departments in the UK. You will be working on some of the most complex ship design and build programmes ever undertaken to deliver cutting edge submarines to the Royal Navy and Royal Australian Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
My client is seeking an engineer looking for an opportunity to enhance their experience and apply the skills they have to service and maintain their coffee machines within the Midlands. This role will require you to have a mechanical understanding of machines and a clean UK driving licence as this is Field Based. Experience of working a Field role is not necessary. My clients business has been around for 50+ years and has been designing, manufacturing, maintaining and distributing coffee machines independently to some of the most recognised and well known business' in Britain and around the world. With this experience they have confidently tailored to their customer's every needs, resulting to attracting clients all over the world, and supplying to almost 100 countries to date. What You'll Be Doing: Carrying out diagnostic repairs ensuring all equipment is left in perfect working order. Carrying out preventative maintenance and yearly PVIs on steam boilers (Training will be provided). Attend customer sites within agreed SLAs and complete brand standard checks Provide technical support when installing new coffee machines on site and/ or follow up Support on maintained equipment. Liaise with the inhouse team when needed. Respect and maintain all company tools, equipment, and vehicle to the highest standards, reporting anything deemed unsafe to use. Be a fantastic and approachable individual when dealing with our clients face to face or via other communication methods. What We Are Looking For From You: Employment history maintaining machines (Vending and Barista equipment desirable). Strong problem-solving skills with an electrical/mechanical background. A positive and enthusiastic individual with a genuine passion for working with machines in a customer facing environment. Computer literacy and clean UK driving licence. Please note: Applicants will only be considered if they meet the starting criteria - Have UK experience working as a Maintenance Engineer for a UK employer - Have Full British Rights to work only. - Visas of any sort or requirement of sponsorship before 2031 will not be considered. - Are a UK resident and have proof of this. - Have a UK Clean driving licence.
Sep 04, 2025
Full time
My client is seeking an engineer looking for an opportunity to enhance their experience and apply the skills they have to service and maintain their coffee machines within the Midlands. This role will require you to have a mechanical understanding of machines and a clean UK driving licence as this is Field Based. Experience of working a Field role is not necessary. My clients business has been around for 50+ years and has been designing, manufacturing, maintaining and distributing coffee machines independently to some of the most recognised and well known business' in Britain and around the world. With this experience they have confidently tailored to their customer's every needs, resulting to attracting clients all over the world, and supplying to almost 100 countries to date. What You'll Be Doing: Carrying out diagnostic repairs ensuring all equipment is left in perfect working order. Carrying out preventative maintenance and yearly PVIs on steam boilers (Training will be provided). Attend customer sites within agreed SLAs and complete brand standard checks Provide technical support when installing new coffee machines on site and/ or follow up Support on maintained equipment. Liaise with the inhouse team when needed. Respect and maintain all company tools, equipment, and vehicle to the highest standards, reporting anything deemed unsafe to use. Be a fantastic and approachable individual when dealing with our clients face to face or via other communication methods. What We Are Looking For From You: Employment history maintaining machines (Vending and Barista equipment desirable). Strong problem-solving skills with an electrical/mechanical background. A positive and enthusiastic individual with a genuine passion for working with machines in a customer facing environment. Computer literacy and clean UK driving licence. Please note: Applicants will only be considered if they meet the starting criteria - Have UK experience working as a Maintenance Engineer for a UK employer - Have Full British Rights to work only. - Visas of any sort or requirement of sponsorship before 2031 will not be considered. - Are a UK resident and have proof of this. - Have a UK Clean driving licence.
Process Improvement Technician Felixstowe Monday - Friday 46,000+ 25 days holiday + Banks Employee assisstance program 10% company pension contribution Global employment opportunities Leading developing and training Discount platforms In this role, you will work closely with cross-functional teams in an R&D and production facility to support operational improvements and drive performance across key areas of the business. You'll contribute to maintaining high product standards, assist in implementing sustainable changes, and help identify opportunities for efficiency through data analysis and continuous improvement practices. Responsibilities: Conducting a range of non-routine testing and analysis on materials and products Interpreting and communicating results to relevant teams Following and updating standard operating procedures and test methods Applying good laboratory practices (GLP) throughout all work Troubleshooting technical issues and recommending solutions Maintaining accurate and detailed testing records Supporting plant and process problem-solving initiatives Partnering with operational teams to apply tools such as Loss & Waste analysis, RCPS, and DMAIC Requirements: Strong analytical and problem-solving skills Attention to detail and high level of accuracy Experience with statistical analysis and quality control charts Familiarity with Good Laboratory Practices (GLP) Experience within a process/manufacturing quality role Excellent written and verbal communication abilities Ability to work independently and as part of a team in a fast-paced and deadline-driven environment Have the skills to utilize manufacturing excellence tools and techniques (e.g. 5S, set up time reduction, Lean six sigma, Autonomous and Reliability centered Maintenance) Degree in biology, biotech, chemisrty or somilar (Good to have) If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Sep 04, 2025
Full time
Process Improvement Technician Felixstowe Monday - Friday 46,000+ 25 days holiday + Banks Employee assisstance program 10% company pension contribution Global employment opportunities Leading developing and training Discount platforms In this role, you will work closely with cross-functional teams in an R&D and production facility to support operational improvements and drive performance across key areas of the business. You'll contribute to maintaining high product standards, assist in implementing sustainable changes, and help identify opportunities for efficiency through data analysis and continuous improvement practices. Responsibilities: Conducting a range of non-routine testing and analysis on materials and products Interpreting and communicating results to relevant teams Following and updating standard operating procedures and test methods Applying good laboratory practices (GLP) throughout all work Troubleshooting technical issues and recommending solutions Maintaining accurate and detailed testing records Supporting plant and process problem-solving initiatives Partnering with operational teams to apply tools such as Loss & Waste analysis, RCPS, and DMAIC Requirements: Strong analytical and problem-solving skills Attention to detail and high level of accuracy Experience with statistical analysis and quality control charts Familiarity with Good Laboratory Practices (GLP) Experience within a process/manufacturing quality role Excellent written and verbal communication abilities Ability to work independently and as part of a team in a fast-paced and deadline-driven environment Have the skills to utilize manufacturing excellence tools and techniques (e.g. 5S, set up time reduction, Lean six sigma, Autonomous and Reliability centered Maintenance) Degree in biology, biotech, chemisrty or somilar (Good to have) If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Who we are in a nutshell. At BES Group, we pride ourselves in being the leading end to end risk management solutions provider in the UK and Ireland. That means it's our job to help keep our customers assets' legally compliant, operational and, above all else, safe. And we do this with a team of the very best people, simple. Our bespoke testing solutions are reinforced by our growing network of testing labs, strategically located around the UK. Our highly skilled testing specialists are focused on machinery safety and life extension for our customers. We use a whole range of non-destructive and destructive testing methods, both on site and at our labs. What will you be doing? We are looking for an NDT Technician with a focus on Phased Array and TOFD. You will be responsible for carrying out a range of NDT inspections to ensure compliance with statutory and/or legislative requirements. The successful candidate will join the South Shields team in our enclosure and also out in the field supporting our customers. As an NDT Technician, you will: Traveling across the North East region, including potential travel across the UK. Undertaking and inspections using NDT techniques such as Phased Array and TOFD. Working on sites such as the AWL factory, ship yards, manufacturing plants, power stations and gas terminals. Providing excellent service to our Customers, including and especially when representing the company on the Customers Site. Working on equipment such as compressors, pipework and high pressure gauges. Interpret and evaluate test results. Carry out all relevant equipment checks and calibrations. Collecting, collating and reporting with sketches, where applicable, the result of the NDT examination. Present reports containing all relevant information in a factual, comprehensive and unambiguous manner. Maintain all records as per specific client contract. Utilise different pieces of technology and software to carry out reports and other documentation. Work to international standards ensuring requirements within them are met. As part of our team, you will get: From £18 per hour Annual salary review Overtime available 28 days holiday per year + statutory UK holidays An extra day's holiday to take on Christmas Eve each year Access to our buy holiday scheme Company pension scheme (Up to 8%) A comprehensive training programme with opportunities for learning different NDT Technicians and progression Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Company wide volunteering scheme Fundraising support for your chosen charity To be join our team, you will need: A PCN Level 2 in TOFD and Phased Array Additional qualifications would be beneficial such as dye pen, MPI or visual inspection IT Skills for report writing (training will be provided for specific systems) Good communication skills Good customer service skills We want you to be you! Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we're a Real Living Wage employer across our complete business and we are delighted to have pledged our committed to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
Sep 04, 2025
Full time
Who we are in a nutshell. At BES Group, we pride ourselves in being the leading end to end risk management solutions provider in the UK and Ireland. That means it's our job to help keep our customers assets' legally compliant, operational and, above all else, safe. And we do this with a team of the very best people, simple. Our bespoke testing solutions are reinforced by our growing network of testing labs, strategically located around the UK. Our highly skilled testing specialists are focused on machinery safety and life extension for our customers. We use a whole range of non-destructive and destructive testing methods, both on site and at our labs. What will you be doing? We are looking for an NDT Technician with a focus on Phased Array and TOFD. You will be responsible for carrying out a range of NDT inspections to ensure compliance with statutory and/or legislative requirements. The successful candidate will join the South Shields team in our enclosure and also out in the field supporting our customers. As an NDT Technician, you will: Traveling across the North East region, including potential travel across the UK. Undertaking and inspections using NDT techniques such as Phased Array and TOFD. Working on sites such as the AWL factory, ship yards, manufacturing plants, power stations and gas terminals. Providing excellent service to our Customers, including and especially when representing the company on the Customers Site. Working on equipment such as compressors, pipework and high pressure gauges. Interpret and evaluate test results. Carry out all relevant equipment checks and calibrations. Collecting, collating and reporting with sketches, where applicable, the result of the NDT examination. Present reports containing all relevant information in a factual, comprehensive and unambiguous manner. Maintain all records as per specific client contract. Utilise different pieces of technology and software to carry out reports and other documentation. Work to international standards ensuring requirements within them are met. As part of our team, you will get: From £18 per hour Annual salary review Overtime available 28 days holiday per year + statutory UK holidays An extra day's holiday to take on Christmas Eve each year Access to our buy holiday scheme Company pension scheme (Up to 8%) A comprehensive training programme with opportunities for learning different NDT Technicians and progression Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Company wide volunteering scheme Fundraising support for your chosen charity To be join our team, you will need: A PCN Level 2 in TOFD and Phased Array Additional qualifications would be beneficial such as dye pen, MPI or visual inspection IT Skills for report writing (training will be provided for specific systems) Good communication skills Good customer service skills We want you to be you! Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we're a Real Living Wage employer across our complete business and we are delighted to have pledged our committed to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
Job Description Digital Research Engineer Derby Hybrid - Minimum 3 days on site Full time 37 hours per week Rolls Royce is one of few organisations on the planet with the creativity, courage and agility, the scope of technology and the breadth of expertise to tackle the biggest challenges facing the world. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing We have a technically challenging Research Engineer role in the Future Methods team in the Research and Technology organisation within RR. This team is required to radically enhance the methods and software that are used across RR globally, to drive innovation and efficiency into our ever more environmentally friendly products and services. You'll be working with the latest technology, alongside diverse and talented people, on live projects that really matter. You'll have the chance to gain valuable experience in areas such as Innovation, Digital, Design and Future Products and get an amazing insight into the way we work, and the culture of Rolls-Royce. You will work on state-of-the-art research programmes including working with external organisations, start-ups, and research establishments, leading and supporting externally funded activities. You will develop and drive the next generation of component system methods, developing technologies, algorithms and software. Key Activities Include: Drive step change efficiency in the design, manufacture, analysis and delivery of new components through automation, standardised processes and innovative systems.Support the development, design and integration of systems that enable seamless engineering workflows from specification, behaviour analysis, integrity assessment to viable manufacture.Collaborate with cross-functional teams in Engineering, IT, and Supply Chain to deliver truly innovative solutions.Apply skills in software, computational analysis, and mechanical engineering to support product development.Influence the adoption of new technologies, engineering capabilities, and cultural change across RR and external partners.Engage with a wide range of internal and external stakeholders to deliver technical and commercial goals.Participate in horizon scanning to identify and evaluate, emerging design system technologies. Who we are looking for: We are looking for talented individuals that embrace agility, are bold, pursue collaboration and seek simplicity in everything they do. We are a small but diverse team so we are looking for people who can operate in a collaborative and open environment. Educated to degree level in a STEM (Computational Science, Software, Mechanical Engineering, Mathematics, Science or Computational based disciplines) discipline or equivalent qualification, with broad postgraduate experience relevant to the design systems role above. Cross sector experience would be highly valuableA strong understanding (through academic studies or practical experience) of Computational Science, Software, Mechanical Engineering, Mathematics or Science.An ability to communicate effectively on complex technical issues and good coding, analysis, CAD / geometry & other computational design tool abilities are important.Programming experience in software e.g. Python, C, C++ , cloud computing, microservices, containerisation and machine learning is desirable.Good interpersonal/consultancy skills and an ability to actively engage with experts and domain specialists from universities, other businesses including start-ups and software/hardware vendors globally.Ability to deal with ambiguity and be self-directed. You will be genuinely passionate and curious about technology and engineering design and how we can make a difference to our world. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. We welcome applications from people with a refugee background. Closing Date 30/09/2025 - Applications will be reviewed when received, successful applicants will be invited to attend an interview prior to the closing date advertised. Job Category Mechanical Systems Posting Date 03 Sept 2025; 00:09 Posting End Date 30 Sept 2025PandoLogic.
Sep 04, 2025
Full time
Job Description Digital Research Engineer Derby Hybrid - Minimum 3 days on site Full time 37 hours per week Rolls Royce is one of few organisations on the planet with the creativity, courage and agility, the scope of technology and the breadth of expertise to tackle the biggest challenges facing the world. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing We have a technically challenging Research Engineer role in the Future Methods team in the Research and Technology organisation within RR. This team is required to radically enhance the methods and software that are used across RR globally, to drive innovation and efficiency into our ever more environmentally friendly products and services. You'll be working with the latest technology, alongside diverse and talented people, on live projects that really matter. You'll have the chance to gain valuable experience in areas such as Innovation, Digital, Design and Future Products and get an amazing insight into the way we work, and the culture of Rolls-Royce. You will work on state-of-the-art research programmes including working with external organisations, start-ups, and research establishments, leading and supporting externally funded activities. You will develop and drive the next generation of component system methods, developing technologies, algorithms and software. Key Activities Include: Drive step change efficiency in the design, manufacture, analysis and delivery of new components through automation, standardised processes and innovative systems.Support the development, design and integration of systems that enable seamless engineering workflows from specification, behaviour analysis, integrity assessment to viable manufacture.Collaborate with cross-functional teams in Engineering, IT, and Supply Chain to deliver truly innovative solutions.Apply skills in software, computational analysis, and mechanical engineering to support product development.Influence the adoption of new technologies, engineering capabilities, and cultural change across RR and external partners.Engage with a wide range of internal and external stakeholders to deliver technical and commercial goals.Participate in horizon scanning to identify and evaluate, emerging design system technologies. Who we are looking for: We are looking for talented individuals that embrace agility, are bold, pursue collaboration and seek simplicity in everything they do. We are a small but diverse team so we are looking for people who can operate in a collaborative and open environment. Educated to degree level in a STEM (Computational Science, Software, Mechanical Engineering, Mathematics, Science or Computational based disciplines) discipline or equivalent qualification, with broad postgraduate experience relevant to the design systems role above. Cross sector experience would be highly valuableA strong understanding (through academic studies or practical experience) of Computational Science, Software, Mechanical Engineering, Mathematics or Science.An ability to communicate effectively on complex technical issues and good coding, analysis, CAD / geometry & other computational design tool abilities are important.Programming experience in software e.g. Python, C, C++ , cloud computing, microservices, containerisation and machine learning is desirable.Good interpersonal/consultancy skills and an ability to actively engage with experts and domain specialists from universities, other businesses including start-ups and software/hardware vendors globally.Ability to deal with ambiguity and be self-directed. You will be genuinely passionate and curious about technology and engineering design and how we can make a difference to our world. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. We welcome applications from people with a refugee background. Closing Date 30/09/2025 - Applications will be reviewed when received, successful applicants will be invited to attend an interview prior to the closing date advertised. Job Category Mechanical Systems Posting Date 03 Sept 2025; 00:09 Posting End Date 30 Sept 2025PandoLogic.
No agencies please Summary We are seeking a Senior Geophysicist who is highly motivated, inquisitive, and thorough, capable of leading and managing complex geophysical projects. This individual will have in-depth knowledge of geophysical investigations, a strategic mindset, and a passion for mentoring and sharing knowledge within our growing team. You will play a leading role in a range of high-profile, complex projects. You will collaborate with industry experts, mentor emerging talent, and push the boundaries of what is possible in the field of geophysics, all while contributing to research and development efforts that keep Zetica at the cutting edge of the industry. Responsibilities Technical Leadership: Lead the design and planning of geophysical surveys, providing input on complex technical solutions at the proposal stage, and refining these during project execution. As a senior member of the team, you will oversee the application of advanced geophysical techniques to meet client needs. Fieldwork Oversight: Oversee data quality and ensure technical integrity throughout fieldwork stages, conducting site visits as required. You will ensure field teams are fully supported, while also leading technically demanding fieldwork when necessary. Advanced Data Analysis: Provide leadership in the processing, interpretation, and reporting stages of projects, taking full responsibility for complex and high-value projects. You will be expected to review outputs and ensure data-driven insights are delivered clearly to clients and internal teams. Quality and Innovation: Maintain and enhance Zetica's high standards of quality assurance, ensuring that projects are delivered on time and within budget, while incorporating innovative techniques and solutions where applicable. Cross-Sector Expertise: Lead projects across Zetica's core departments, including transport infrastructure, engineering/geotechnical, geological/environmental geophysical surveys, unexploded ordnance detection, and utility service detection. You will drive excellence in a variety of sectors, applying advanced geophysical methodologies and instrumentation. Mentorship and Development: As a senior figure within the business, mentor junior staff and provide technical guidance to colleagues, helping to develop the skills and expertise of the wider team. Occasional Fieldwork: While your role will be predominantly office-based, you will be required to undertake occasional fieldwork. This will mostly take place in the UK but may involve some international travel, depending on project requirements. Requirements We are looking for an experienced Senior Geophysicist with the following profile: Academic Qualifications: A postgraduate degree in geophysics or a related field. Experience: At least 7 years of relevant hands-on experience in high-resolution, near-surface geophysical investigations, with a proven track record of managing complex, large-scale geophysical projects from planning through to delivery. The successful candidate will have significant experience leading teams and overseeing high-value projects. Technical Expertise: Proficiency in a wide range of geophysical methods, including: Ground Penetrating Radar (GPR) Electromagnetics (EM) Magnetometry Microgravity Electrical methods (e.g., resistivity, induced polarisation) Seismic methods (e.g., P- and S-wave seismic refraction, surface wave analysis Software Proficiency: Expertise in geophysical data processing and interpretation software such as Oasis Montaj, GeoGiga, SurfSeis, Res2Dinv, Zonde, Aarhus Workbench, or similar. Experience with coding in Python for custom data processing and automation is highly desirable, as well as proficiency with GIS and mapping tools like AutoCAD, Microstation, ArcGIS, and QGIS. Leadership and Communication: Strong leadership capabilities, with excellent written and verbal communication skills. The ability to present complex technical findings to both technical and non-technical stakeholders is essential. Strategic Thinking: A forward-thinking individual who can identify opportunities for innovation and is adept at driving research and development within the geophysics discipline. You must already have the right to work in the UK, as we do not sponsor for a visa. Job Types: Full-time, Permanent Benefits: Casual dress Company events Company pension Cycle to work scheme On-site parking Private medical insurance Profit sharing Education: Bachelor's (required) Experience: Geophysics: 5 years (required) Licence/Certification: full clean manual driving licence (required) Work authorisation: United Kingdom (required) Location: Eynsham (preferred) Willingness to travel: 25% (preferred) Work Location: In person
Sep 04, 2025
Full time
No agencies please Summary We are seeking a Senior Geophysicist who is highly motivated, inquisitive, and thorough, capable of leading and managing complex geophysical projects. This individual will have in-depth knowledge of geophysical investigations, a strategic mindset, and a passion for mentoring and sharing knowledge within our growing team. You will play a leading role in a range of high-profile, complex projects. You will collaborate with industry experts, mentor emerging talent, and push the boundaries of what is possible in the field of geophysics, all while contributing to research and development efforts that keep Zetica at the cutting edge of the industry. Responsibilities Technical Leadership: Lead the design and planning of geophysical surveys, providing input on complex technical solutions at the proposal stage, and refining these during project execution. As a senior member of the team, you will oversee the application of advanced geophysical techniques to meet client needs. Fieldwork Oversight: Oversee data quality and ensure technical integrity throughout fieldwork stages, conducting site visits as required. You will ensure field teams are fully supported, while also leading technically demanding fieldwork when necessary. Advanced Data Analysis: Provide leadership in the processing, interpretation, and reporting stages of projects, taking full responsibility for complex and high-value projects. You will be expected to review outputs and ensure data-driven insights are delivered clearly to clients and internal teams. Quality and Innovation: Maintain and enhance Zetica's high standards of quality assurance, ensuring that projects are delivered on time and within budget, while incorporating innovative techniques and solutions where applicable. Cross-Sector Expertise: Lead projects across Zetica's core departments, including transport infrastructure, engineering/geotechnical, geological/environmental geophysical surveys, unexploded ordnance detection, and utility service detection. You will drive excellence in a variety of sectors, applying advanced geophysical methodologies and instrumentation. Mentorship and Development: As a senior figure within the business, mentor junior staff and provide technical guidance to colleagues, helping to develop the skills and expertise of the wider team. Occasional Fieldwork: While your role will be predominantly office-based, you will be required to undertake occasional fieldwork. This will mostly take place in the UK but may involve some international travel, depending on project requirements. Requirements We are looking for an experienced Senior Geophysicist with the following profile: Academic Qualifications: A postgraduate degree in geophysics or a related field. Experience: At least 7 years of relevant hands-on experience in high-resolution, near-surface geophysical investigations, with a proven track record of managing complex, large-scale geophysical projects from planning through to delivery. The successful candidate will have significant experience leading teams and overseeing high-value projects. Technical Expertise: Proficiency in a wide range of geophysical methods, including: Ground Penetrating Radar (GPR) Electromagnetics (EM) Magnetometry Microgravity Electrical methods (e.g., resistivity, induced polarisation) Seismic methods (e.g., P- and S-wave seismic refraction, surface wave analysis Software Proficiency: Expertise in geophysical data processing and interpretation software such as Oasis Montaj, GeoGiga, SurfSeis, Res2Dinv, Zonde, Aarhus Workbench, or similar. Experience with coding in Python for custom data processing and automation is highly desirable, as well as proficiency with GIS and mapping tools like AutoCAD, Microstation, ArcGIS, and QGIS. Leadership and Communication: Strong leadership capabilities, with excellent written and verbal communication skills. The ability to present complex technical findings to both technical and non-technical stakeholders is essential. Strategic Thinking: A forward-thinking individual who can identify opportunities for innovation and is adept at driving research and development within the geophysics discipline. You must already have the right to work in the UK, as we do not sponsor for a visa. Job Types: Full-time, Permanent Benefits: Casual dress Company events Company pension Cycle to work scheme On-site parking Private medical insurance Profit sharing Education: Bachelor's (required) Experience: Geophysics: 5 years (required) Licence/Certification: full clean manual driving licence (required) Work authorisation: United Kingdom (required) Location: Eynsham (preferred) Willingness to travel: 25% (preferred) Work Location: In person
We are looking for a Senior Building Services manager for one of our clients who are overseeing the development of sizeable multi million construction developments in Manchester. They are a well established, cash rich business. They are looking for someone to oversee the MEP element of the projects ensuring dleivery and continuity. This is a permanent long term opportunity. Role. duties, responsibilities Estimate and scope MEP trades during pre-construction. Review contract documents, making suggestions/modifications as they relate to the MEP trades. Manage and lead MEP subcontractors throughout duration of the project. Assist with developing detailed critical path methods (CPM) schedules for all MEP installation activities, including cost and resource loading. Work on project logistics and temporary facility plans. Review and approve material and equipment for MEP systems prior to installation. Monitor the installation and start-up of MEP systems and commissioning of project. Coordinate activities, materials procurement and other related activities with Project Manager and field staff. Communicate progress and prepare appropriate reports as needed. Represent the client with regard to the MEP process at weekly and contractors meetings. Take overall responsibility for the performance of all MEP trades. Supervise review and coordination of submittals and shop drawings Aims and Objectives: Deliver the company's expectations successfully across all key areas of the project, managing and supporting the individuals and team to exceed business performance targets. Identify and develop profitable opportunities through the procurement prior to the project commencing. Increase the profitability of the project through Procurement and VE opportunities. Ensure compliance to all policies during the project installation and during PC handover. Key responsibilities: Deliver financial targets to meet established objectives, this will include the reporting of financial status with the aid of the Site Commercial team into the Project Manager. Ensure compliance with company policies and procedures including Health & Safety, Quality Assurance and Engineering standards. Ensure works are carried out to high standard complying with relevant British Standards and codes of practice. Manage the provision of technical support to the contract. Maintain a close working relationship with Commercial, Engineering, Estimating and Support teams. Assist in final contract negotiations prior to contract award (including such matters as commercial and engineering matters). Provide engineering support (Mechanical or Electrical) as necessary to the business should workload demand in other areas or other new works. HNC/HND in Mechancial or electrical engineering Dirving licence Degree qualified - desirable M&E Trade background - desirable Previous experience in the role is essential. There is a lucrative salary and package on offer with the role. RG Setsquare is acting as an Employment Agency in relation to this vacancy.
Sep 04, 2025
Full time
We are looking for a Senior Building Services manager for one of our clients who are overseeing the development of sizeable multi million construction developments in Manchester. They are a well established, cash rich business. They are looking for someone to oversee the MEP element of the projects ensuring dleivery and continuity. This is a permanent long term opportunity. Role. duties, responsibilities Estimate and scope MEP trades during pre-construction. Review contract documents, making suggestions/modifications as they relate to the MEP trades. Manage and lead MEP subcontractors throughout duration of the project. Assist with developing detailed critical path methods (CPM) schedules for all MEP installation activities, including cost and resource loading. Work on project logistics and temporary facility plans. Review and approve material and equipment for MEP systems prior to installation. Monitor the installation and start-up of MEP systems and commissioning of project. Coordinate activities, materials procurement and other related activities with Project Manager and field staff. Communicate progress and prepare appropriate reports as needed. Represent the client with regard to the MEP process at weekly and contractors meetings. Take overall responsibility for the performance of all MEP trades. Supervise review and coordination of submittals and shop drawings Aims and Objectives: Deliver the company's expectations successfully across all key areas of the project, managing and supporting the individuals and team to exceed business performance targets. Identify and develop profitable opportunities through the procurement prior to the project commencing. Increase the profitability of the project through Procurement and VE opportunities. Ensure compliance to all policies during the project installation and during PC handover. Key responsibilities: Deliver financial targets to meet established objectives, this will include the reporting of financial status with the aid of the Site Commercial team into the Project Manager. Ensure compliance with company policies and procedures including Health & Safety, Quality Assurance and Engineering standards. Ensure works are carried out to high standard complying with relevant British Standards and codes of practice. Manage the provision of technical support to the contract. Maintain a close working relationship with Commercial, Engineering, Estimating and Support teams. Assist in final contract negotiations prior to contract award (including such matters as commercial and engineering matters). Provide engineering support (Mechanical or Electrical) as necessary to the business should workload demand in other areas or other new works. HNC/HND in Mechancial or electrical engineering Dirving licence Degree qualified - desirable M&E Trade background - desirable Previous experience in the role is essential. There is a lucrative salary and package on offer with the role. RG Setsquare is acting as an Employment Agency in relation to this vacancy.
Renewables Engineer Ground Source Heat Pumps Location: London (Mobile) Salary: £45,000 £55,000 per annum (dependent on experience) Company Vehicle Full-time, Permanent Full UK Driving License Required A leading renewable energy contractor, specialising in sustainable heating and cooling technologies, is looking to appoint a Renewables Engineer. This role will focus on the service, maintenance, and repair of ground source heat pump (GSHP) systems, supporting projects across domestic, commercial, and large-scale applications. This is an excellent opportunity to join a forward-thinking business committed to quality, innovation, and driving the transition to low-carbon energy solutions. Key Responsibilities Service and maintain renewable energy systems, with a focus on ground source heat pumps (GSHPs) Diagnose faults and carry out repairs across domestic and commercial GSHP installations Perform testing, inspections, and efficiency checks to ensure system performance Liaise with clients, management teams, and manufacturers to ensure smooth delivery Produce accurate service and repair reports for project documentation Provide technical support to commissioning, aftercare, and project management teams Requirements Proven experience as a renewables engineer or in heat pump servicing and maintenance Strong mechanical and electrical knowledge (essential for renewable system servicing) Confident working on large ground source heat pump systems F-Gas certification (essential) Full UK driving license Excellent communication, problem-solving, and decision-making skills Knowledge of UK building methods and regulations Ability to work independently and as part of a team Desirable Traits Commercial awareness with strong client-facing ability Ability to mentor, support, and motivate others Professional, customer-focused approach How to Apply: If you re looking to grow your career in renewable energy and join a company at the forefront of ground source heat pump engineering, please send your CV and a short cover letter outlining your experience.
Sep 04, 2025
Full time
Renewables Engineer Ground Source Heat Pumps Location: London (Mobile) Salary: £45,000 £55,000 per annum (dependent on experience) Company Vehicle Full-time, Permanent Full UK Driving License Required A leading renewable energy contractor, specialising in sustainable heating and cooling technologies, is looking to appoint a Renewables Engineer. This role will focus on the service, maintenance, and repair of ground source heat pump (GSHP) systems, supporting projects across domestic, commercial, and large-scale applications. This is an excellent opportunity to join a forward-thinking business committed to quality, innovation, and driving the transition to low-carbon energy solutions. Key Responsibilities Service and maintain renewable energy systems, with a focus on ground source heat pumps (GSHPs) Diagnose faults and carry out repairs across domestic and commercial GSHP installations Perform testing, inspections, and efficiency checks to ensure system performance Liaise with clients, management teams, and manufacturers to ensure smooth delivery Produce accurate service and repair reports for project documentation Provide technical support to commissioning, aftercare, and project management teams Requirements Proven experience as a renewables engineer or in heat pump servicing and maintenance Strong mechanical and electrical knowledge (essential for renewable system servicing) Confident working on large ground source heat pump systems F-Gas certification (essential) Full UK driving license Excellent communication, problem-solving, and decision-making skills Knowledge of UK building methods and regulations Ability to work independently and as part of a team Desirable Traits Commercial awareness with strong client-facing ability Ability to mentor, support, and motivate others Professional, customer-focused approach How to Apply: If you re looking to grow your career in renewable energy and join a company at the forefront of ground source heat pump engineering, please send your CV and a short cover letter outlining your experience.
What Are We Looking For? RSE is recruiting Control System Engineers across our business to join us in delivering solutions to the Water industry. You ll be in involved in the development, commissioning and support of automation and control systems solutions as well as automation and control systems design, specification, programming, simulation, testing and start-up assistance. Some of Your Key Duties Include: Detailed design proposals that establish the scope of work required for new build and ICA refurbishment projects. Design, develop, and program control systems using Siemens TIA Portal and AB Studio 5000 applications. Configure and implement Siemens WinCC SCADA systems and HMIs for industrial automation. Troubleshoot and optimise existing control systems for performance and reliability. Generate Client documents including FDS, SDS. Conduct system testing, validation, and commissioning at client sites. Provide technical support and training to clients and team members. Define the project Software Testing strategy and ensure appropriate time and resources are allocated. Implementation of robust change control during the entire project lifecycle. Develop and self-test control system software to achieve the required functionality in accordance with the FDS. Carry out Site Acceptance Testing of the Control System against the SAT document. What Do You Need? HNC/HND Degree in Engineering or equivalent, with particular emphasis in electrical, mechanical, electronic, automation and/or chemical discipline Have proven ability in the design and commissioning of control and electrical systems associated with process automation, preferably in the Hydro power and Water sector. Detailed experience in the development of Control Systems solutions using Programmable Logic Controllers (PLC s) and HMI/SCADA and Telemetry Systems in the process control environment using one or more of the following manufacturers: Allen Bradley/ Rockwell, Siemens, Mitsubishi Experienced working knowledge of Profibus, ProfNet, Ethernet. Modbus and DH+ systems Experienced in integration and modification into existing systems PLC control systems in a live environment. Have a strong working knowledge of process systems, P&ID control and loop tuning Working knowledge and an understanding of electrical schematics. Must be flexible and willing to travel, including regular site working. ECS/CSCS card SIMEMS/Rockwell Certification Full UK Driving Licence Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go. Private Healthcare (Personal). Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.
Sep 04, 2025
Full time
What Are We Looking For? RSE is recruiting Control System Engineers across our business to join us in delivering solutions to the Water industry. You ll be in involved in the development, commissioning and support of automation and control systems solutions as well as automation and control systems design, specification, programming, simulation, testing and start-up assistance. Some of Your Key Duties Include: Detailed design proposals that establish the scope of work required for new build and ICA refurbishment projects. Design, develop, and program control systems using Siemens TIA Portal and AB Studio 5000 applications. Configure and implement Siemens WinCC SCADA systems and HMIs for industrial automation. Troubleshoot and optimise existing control systems for performance and reliability. Generate Client documents including FDS, SDS. Conduct system testing, validation, and commissioning at client sites. Provide technical support and training to clients and team members. Define the project Software Testing strategy and ensure appropriate time and resources are allocated. Implementation of robust change control during the entire project lifecycle. Develop and self-test control system software to achieve the required functionality in accordance with the FDS. Carry out Site Acceptance Testing of the Control System against the SAT document. What Do You Need? HNC/HND Degree in Engineering or equivalent, with particular emphasis in electrical, mechanical, electronic, automation and/or chemical discipline Have proven ability in the design and commissioning of control and electrical systems associated with process automation, preferably in the Hydro power and Water sector. Detailed experience in the development of Control Systems solutions using Programmable Logic Controllers (PLC s) and HMI/SCADA and Telemetry Systems in the process control environment using one or more of the following manufacturers: Allen Bradley/ Rockwell, Siemens, Mitsubishi Experienced working knowledge of Profibus, ProfNet, Ethernet. Modbus and DH+ systems Experienced in integration and modification into existing systems PLC control systems in a live environment. Have a strong working knowledge of process systems, P&ID control and loop tuning Working knowledge and an understanding of electrical schematics. Must be flexible and willing to travel, including regular site working. ECS/CSCS card SIMEMS/Rockwell Certification Full UK Driving Licence Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go. Private Healthcare (Personal). Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.
