Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
AI Applications Engineer Remote (Quarterly onsite) Full-time Permanent £50,000 - £60,000 + Benefits This is an opportunity to join a scaling AI consultancy firm looking to enhance their capabilities further across Data Science, GenAI and Machine Learning. You ll be focused on the vision, design, and deployment of high-impact AI solutions, while also working across a range of real-world use cases and getting hands-on with the integration into production environments. Role Overview You will work closely with cross-functional teams to deliver end-to-end AI solutions, from technical design and development to deployment and optimisation. Your work will involve integrating advanced AI models (including GenAI and reasoning-based models) into user-facing applications using modern full-stack technologies. Key Responsibilities Develop and deploy AI-powered features into production systems. Build and optimise automation pipelines for scalable delivery. Implement RAG (Retrieval-Augmented Generation) and reasoning models into customer-facing applications. Collaborate with data scientists and engineers to translate technical concepts into real-world tools. Build full-stack applications using the MERN stack and integrate Python-based AI services via APIs. Maintain clean, scalable, and testable code with attention to performance and reliability. Engage directly with clients to understand requirements, present technical solutions and support project delivery. Core Skills & Experience JavaScript/TypeScript, with experience in MERN Stack (MongoDB, Express.js, React.js, Node.js or similar ) Strong proficiency in Python, particularly for AI and ML applications. Hands-on experience with PyTorch, GenAI, and reasoning models. Experience implementing RAG architectures in production environments. Solid understanding of both SQL and NoSQL databases Experience building and consuming APIs; familiarity with CI/CD practices. Nice to Have Exposure to cloud platforms (AWS, GCP, Azure) Knowledge of automation tools (UIPath, Power Automate or similar ) Familiarity with automation pipelines and business workflows. If you're passionate about applying AI in real-world settings, enjoy the pace of a scale up environment and enjoy working across the stack to bring intelligent products to life, this could be an interesting role for you to explore.
Sep 04, 2025
Full time
AI Applications Engineer Remote (Quarterly onsite) Full-time Permanent £50,000 - £60,000 + Benefits This is an opportunity to join a scaling AI consultancy firm looking to enhance their capabilities further across Data Science, GenAI and Machine Learning. You ll be focused on the vision, design, and deployment of high-impact AI solutions, while also working across a range of real-world use cases and getting hands-on with the integration into production environments. Role Overview You will work closely with cross-functional teams to deliver end-to-end AI solutions, from technical design and development to deployment and optimisation. Your work will involve integrating advanced AI models (including GenAI and reasoning-based models) into user-facing applications using modern full-stack technologies. Key Responsibilities Develop and deploy AI-powered features into production systems. Build and optimise automation pipelines for scalable delivery. Implement RAG (Retrieval-Augmented Generation) and reasoning models into customer-facing applications. Collaborate with data scientists and engineers to translate technical concepts into real-world tools. Build full-stack applications using the MERN stack and integrate Python-based AI services via APIs. Maintain clean, scalable, and testable code with attention to performance and reliability. Engage directly with clients to understand requirements, present technical solutions and support project delivery. Core Skills & Experience JavaScript/TypeScript, with experience in MERN Stack (MongoDB, Express.js, React.js, Node.js or similar ) Strong proficiency in Python, particularly for AI and ML applications. Hands-on experience with PyTorch, GenAI, and reasoning models. Experience implementing RAG architectures in production environments. Solid understanding of both SQL and NoSQL databases Experience building and consuming APIs; familiarity with CI/CD practices. Nice to Have Exposure to cloud platforms (AWS, GCP, Azure) Knowledge of automation tools (UIPath, Power Automate or similar ) Familiarity with automation pipelines and business workflows. If you're passionate about applying AI in real-world settings, enjoy the pace of a scale up environment and enjoy working across the stack to bring intelligent products to life, this could be an interesting role for you to explore.
Adecco is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Simulation Engineer Crewe Contract until 23/12/2025 (12 Month rolling contract) Day Rate Outside IR35 Purpose of the job Adecco working in partnership with Bentley Motors are seeking a Simulation Engineer to support engineers and feature owners, to create virtual models of vehicles and lighting components for simulation. Complete Analysis and reports of results and findings. Prepare demonstrations to show how the lighting in and around the vehicle will behave. Position in organisation Light Simulation Engineer part of the Light Simulation & Photometry Team EE/L, within Electrical Engineering Department. Reporting to the Technical Manager and the Head of Lighting. Scope of Job 1: Simulation Model Creation 2: Running and Analysing Simulations 3: Generation of Simulation Reports 4: Maintaining Materials library 5: Development of Simulation Techniques 6: Cross Functional Communication Key Responsibilities Customer Simulation Requirements Receipt and acknowledgement of Simulation request. Verification of customer requirements and Measurement Specifications. Management of customer requirements & Expectations and deadlines Communication / information sharing & packaging reviews with Research and developments teams, including Electrical, Concepts, Styling & Design, Trim, and other major interfaces Data preparation and Model Creation & Simulation Launch Preparation and cleaning of 3D data. Application of physically correct materials Creation of sensors & implementation of design tables Mesh adjustment Launching Simulations and use of HPC Use of active simulation for design Data Analysis, Report & Demonstration Compilation Detailed Analysis of Simulation Results, Including but not exhaustive Occupant Vision and Visual Ergonomics Lighting Concept strategy Interior Lighting (Internal reflections, Sunlight effects, core functional lighting, Ambient lighting, stowage lighting, Displays HUD, Cube simulations) Exterior Lighting (Front and rear lighting experience and performance. Impacts to customers and environment lit and unlit) Lighting effects Legal verification Vehicle benchmarking Root cause analysis of Errors and defects discovered Implications or impact introduced by the system / components into interfacing systems i.e. Interior Trim or BiW must be identified with potential solutions Identification of any packaging constraints & style hard points Scripting & Macro Creation Creation and Compilation of test summaries and of comprehensive & detailed test reports. Support Feature owners, Suppliers, and internal customers with understanding measurement results and analysis. Demonstration presentation of Simulation results Maintenance and Customer support Maintain material measurement library. Maintain process documentation for simulation methods/techniques Correlation of simulation results to real world situation Support customers understanding of simulation methods and techniques Experience Experience and knowledge of delivering complete vehicle optical simulation and vehicle integration of illuminated components with ergonomic eye point considerations on the interior & exterior of the vehicle. Excellent knowledge is required of: Catia v5, Softwares: Speos for Catia Ansys Speos AVX (awareness) Prita MS Office (including scripting in Visual basic) Detailed Analysis of simulation results Complete Vehicle component integration Good understanding of materials and behaviour with light Other Requirements Reading Technical Drawings. Ability to write clear technical reports Understanding of electrical circuit diagrams, behaviour and control of LEDs and system integration onto vehicles. Data management and revision control Appreciation of vehicle communication networks including CAN and LIN communication buses. Working to quality standards and processes Experience with Microsoft office programs including word, power point and excel Note - if you do not hear back within 5 working days of applying, please assume you have been unsuccessful on this occasion
Sep 04, 2025
Contractor
Adecco is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Simulation Engineer Crewe Contract until 23/12/2025 (12 Month rolling contract) Day Rate Outside IR35 Purpose of the job Adecco working in partnership with Bentley Motors are seeking a Simulation Engineer to support engineers and feature owners, to create virtual models of vehicles and lighting components for simulation. Complete Analysis and reports of results and findings. Prepare demonstrations to show how the lighting in and around the vehicle will behave. Position in organisation Light Simulation Engineer part of the Light Simulation & Photometry Team EE/L, within Electrical Engineering Department. Reporting to the Technical Manager and the Head of Lighting. Scope of Job 1: Simulation Model Creation 2: Running and Analysing Simulations 3: Generation of Simulation Reports 4: Maintaining Materials library 5: Development of Simulation Techniques 6: Cross Functional Communication Key Responsibilities Customer Simulation Requirements Receipt and acknowledgement of Simulation request. Verification of customer requirements and Measurement Specifications. Management of customer requirements & Expectations and deadlines Communication / information sharing & packaging reviews with Research and developments teams, including Electrical, Concepts, Styling & Design, Trim, and other major interfaces Data preparation and Model Creation & Simulation Launch Preparation and cleaning of 3D data. Application of physically correct materials Creation of sensors & implementation of design tables Mesh adjustment Launching Simulations and use of HPC Use of active simulation for design Data Analysis, Report & Demonstration Compilation Detailed Analysis of Simulation Results, Including but not exhaustive Occupant Vision and Visual Ergonomics Lighting Concept strategy Interior Lighting (Internal reflections, Sunlight effects, core functional lighting, Ambient lighting, stowage lighting, Displays HUD, Cube simulations) Exterior Lighting (Front and rear lighting experience and performance. Impacts to customers and environment lit and unlit) Lighting effects Legal verification Vehicle benchmarking Root cause analysis of Errors and defects discovered Implications or impact introduced by the system / components into interfacing systems i.e. Interior Trim or BiW must be identified with potential solutions Identification of any packaging constraints & style hard points Scripting & Macro Creation Creation and Compilation of test summaries and of comprehensive & detailed test reports. Support Feature owners, Suppliers, and internal customers with understanding measurement results and analysis. Demonstration presentation of Simulation results Maintenance and Customer support Maintain material measurement library. Maintain process documentation for simulation methods/techniques Correlation of simulation results to real world situation Support customers understanding of simulation methods and techniques Experience Experience and knowledge of delivering complete vehicle optical simulation and vehicle integration of illuminated components with ergonomic eye point considerations on the interior & exterior of the vehicle. Excellent knowledge is required of: Catia v5, Softwares: Speos for Catia Ansys Speos AVX (awareness) Prita MS Office (including scripting in Visual basic) Detailed Analysis of simulation results Complete Vehicle component integration Good understanding of materials and behaviour with light Other Requirements Reading Technical Drawings. Ability to write clear technical reports Understanding of electrical circuit diagrams, behaviour and control of LEDs and system integration onto vehicles. Data management and revision control Appreciation of vehicle communication networks including CAN and LIN communication buses. Working to quality standards and processes Experience with Microsoft office programs including word, power point and excel Note - if you do not hear back within 5 working days of applying, please assume you have been unsuccessful on this occasion
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
CNC Programmer Job Type: Full time Start Date: ASAP Duration: Permanent Location: Derby Salary: 40,000 per annum Sector: Aerospace We're seeking a forward-thinking CNC Programmer to join our client's high-performance team at their Derby facility. As the CNC Programmer you'll contribute to the production of complex aerospace components that power the future of flight. Reporting to the Team Leader, the CNC Programmer role will be responsible for programming, setting, and operating CNC machines within our Metallic Machine Shop. You will work over a two-shift pattern, Monday to Friday, producing high-precision components in a fast-paced environment at the site in Derby. The CNC Programmer role requires close collaboration with design, engineering, and production teams to ensure the highest quality standards and rapid turnaround times are achieved. Duties and Responsibilities: Create and optimise CNC programs using CAD/CAM software. Set and operate multi-axis CNC milling machines for high-tolerance manufacturing. Select appropriate cutting tools, speeds, and feeds to maximise efficiency and quality. Work to extremely tight tolerances, meeting stringent Aerospace specifications. Conduct in-process inspections using precision measuring equipment (micrometres, gauges, etc.). Maintain high attention to detail to minimise scrap and rework. Collaborate with design engineers and production teams to improve manufacturability (DFM). Identify and implement process improvements to reduce cycle times and boost productivity. Support the introduction of new materials and machining techniques. Perform routine maintenance on CNC machinery to ensure optimal performance. Adhere to all health, safety, and environmental regulations. Maintain a clean and organised work space in line with 5S principles. Qualifications, Experience and Attributes Required: Proven experience as a CNC Programmer / Machinist in a high-performance engineering environment (preferably Aerospace, Motorsport, or Precision Engineering). Proficient in EdgeCam, ISO or Fanuc controls Strong knowledge of 5-axis CNC milling Ability to interpret complex engineering drawings and GD&T Skilled in tooling selection, cutting strategies, and machining parameters for exotic materials Excellent problem-solving skills and attention to detail Capable of working under pressure and to tight deadlines Strong communication and teamwork skills Self-motivated with the ability to work independently Work Pattern: Full time, 39 hours per week Day Shift (8am-5pm Mon-Thurs, 8am-1pm Fri) Benefits of the Role: Competitive salary and benefits package Professional development and training opportunities A supportive team environment focused on innovation and excellence The opportunity to contribute to cutting-edge aerospace programs 40,000 per annum salary About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance, and engineering companies. If you are interested in hearing more about the CNC Programmer role, please contact Josh on (phone number removed).
Sep 04, 2025
Full time
CNC Programmer Job Type: Full time Start Date: ASAP Duration: Permanent Location: Derby Salary: 40,000 per annum Sector: Aerospace We're seeking a forward-thinking CNC Programmer to join our client's high-performance team at their Derby facility. As the CNC Programmer you'll contribute to the production of complex aerospace components that power the future of flight. Reporting to the Team Leader, the CNC Programmer role will be responsible for programming, setting, and operating CNC machines within our Metallic Machine Shop. You will work over a two-shift pattern, Monday to Friday, producing high-precision components in a fast-paced environment at the site in Derby. The CNC Programmer role requires close collaboration with design, engineering, and production teams to ensure the highest quality standards and rapid turnaround times are achieved. Duties and Responsibilities: Create and optimise CNC programs using CAD/CAM software. Set and operate multi-axis CNC milling machines for high-tolerance manufacturing. Select appropriate cutting tools, speeds, and feeds to maximise efficiency and quality. Work to extremely tight tolerances, meeting stringent Aerospace specifications. Conduct in-process inspections using precision measuring equipment (micrometres, gauges, etc.). Maintain high attention to detail to minimise scrap and rework. Collaborate with design engineers and production teams to improve manufacturability (DFM). Identify and implement process improvements to reduce cycle times and boost productivity. Support the introduction of new materials and machining techniques. Perform routine maintenance on CNC machinery to ensure optimal performance. Adhere to all health, safety, and environmental regulations. Maintain a clean and organised work space in line with 5S principles. Qualifications, Experience and Attributes Required: Proven experience as a CNC Programmer / Machinist in a high-performance engineering environment (preferably Aerospace, Motorsport, or Precision Engineering). Proficient in EdgeCam, ISO or Fanuc controls Strong knowledge of 5-axis CNC milling Ability to interpret complex engineering drawings and GD&T Skilled in tooling selection, cutting strategies, and machining parameters for exotic materials Excellent problem-solving skills and attention to detail Capable of working under pressure and to tight deadlines Strong communication and teamwork skills Self-motivated with the ability to work independently Work Pattern: Full time, 39 hours per week Day Shift (8am-5pm Mon-Thurs, 8am-1pm Fri) Benefits of the Role: Competitive salary and benefits package Professional development and training opportunities A supportive team environment focused on innovation and excellence The opportunity to contribute to cutting-edge aerospace programs 40,000 per annum salary About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance, and engineering companies. If you are interested in hearing more about the CNC Programmer role, please contact Josh on (phone number removed).
Expleo is a trusted global partner in end-to-end engineering, quality services, and management consulting for digital transformation. We support our clients in navigating technological change to deliver innovation, improve performance, and transform how they operate. Our work makes a real difference - not just to our customers, but to the everyday lives of people across the globe. We're expanding our Automotive division and are looking for Automotive Software Engineers to join our Electrical & Embedded Systems team. This is a unique opportunity to work on cutting-edge automotive projects and contribute to the growth of Expleo's capabilities in embedded systems and digital vehicle technologies. The position is based in the Midlands. Key Responsibilities You will contribute to system-level software development across multiple domains: Operating Systems: Develop and maintain core system software Device Drivers: Interface hardware with the OS Compilers & Tools: Build and optimise tools that translate source code into machine code Firmware Development: Control specialised hardware devices Networking Software: Enable communications between systems and networks Security: Implement robust security measures at the system level Performance Optimisation: Enhance speed, stability, and efficiency of embedded systems Essential Requirements Degree in Computer Science, Software Engineering, or a related discipline Proficiency in Embedded C, C++, and/or assembly languages Solid understanding of computer architecture and operating systems internals Strong debugging and problem-solving skills Prior experience in automotive software development and testing Good understanding of AUTOSAR architecture Experience working on safety-critical software projects Practical knowledge of ISO 26262 Part 6 and full ASPICE V-cycle software development Desirable Skills Experience with ADI wireless Battery Management Systems (wBMS) or BMS chipsets Familiarity with diagnostics, CAN tools, or model-based development Exposure to agile methodologies and CI/CD pipelines Why Join Expleo? Be part of a growing team at the forefront of automotive innovation Work on high-impact, next-generation vehicle technologies Access to ongoing training and career development Competitive salary or contract day rate PLEASE NOTE To meet with current legislation, right to work checks will be carried out to ensure candidates can work in the UK. Regretfully, we are unable to support applications that require sponsorship. If you are interested in applying for the role of Automotive Software Engineer require further information, please contact: Leanne Eaton (phone number removed) (url removed)
Sep 04, 2025
Full time
Expleo is a trusted global partner in end-to-end engineering, quality services, and management consulting for digital transformation. We support our clients in navigating technological change to deliver innovation, improve performance, and transform how they operate. Our work makes a real difference - not just to our customers, but to the everyday lives of people across the globe. We're expanding our Automotive division and are looking for Automotive Software Engineers to join our Electrical & Embedded Systems team. This is a unique opportunity to work on cutting-edge automotive projects and contribute to the growth of Expleo's capabilities in embedded systems and digital vehicle technologies. The position is based in the Midlands. Key Responsibilities You will contribute to system-level software development across multiple domains: Operating Systems: Develop and maintain core system software Device Drivers: Interface hardware with the OS Compilers & Tools: Build and optimise tools that translate source code into machine code Firmware Development: Control specialised hardware devices Networking Software: Enable communications between systems and networks Security: Implement robust security measures at the system level Performance Optimisation: Enhance speed, stability, and efficiency of embedded systems Essential Requirements Degree in Computer Science, Software Engineering, or a related discipline Proficiency in Embedded C, C++, and/or assembly languages Solid understanding of computer architecture and operating systems internals Strong debugging and problem-solving skills Prior experience in automotive software development and testing Good understanding of AUTOSAR architecture Experience working on safety-critical software projects Practical knowledge of ISO 26262 Part 6 and full ASPICE V-cycle software development Desirable Skills Experience with ADI wireless Battery Management Systems (wBMS) or BMS chipsets Familiarity with diagnostics, CAN tools, or model-based development Exposure to agile methodologies and CI/CD pipelines Why Join Expleo? Be part of a growing team at the forefront of automotive innovation Work on high-impact, next-generation vehicle technologies Access to ongoing training and career development Competitive salary or contract day rate PLEASE NOTE To meet with current legislation, right to work checks will be carried out to ensure candidates can work in the UK. Regretfully, we are unable to support applications that require sponsorship. If you are interested in applying for the role of Automotive Software Engineer require further information, please contact: Leanne Eaton (phone number removed) (url removed)
Frontline Recruitment Group
Stockingford, Warwickshire
Role : CNC Miller - Programmer, Setter,Operator Shifts : Mon-Thur: 7:30 - 16:30 Fridays 7:30 - 12:30 Job description: Overview We are seeking a skilled CNC Miller to join our dynamic team. The ideal candidate will possess a strong understanding of CNC machining processes and be able to translate engineering drawings into precise machine instructions. This role is crucial for ensuring the efficient fabrication of components while maintaining high-quality standards. If you have a passion for machining and a keen eye for detail, we encourage you to apply. Responsibilities Creating, editing and proving CNC programmes Setting and operating CNC Milling machines Interpret technical drawings and specifications to fabricate components using CNC mills. Utilise CAD software, such as SolidWorks, to create and modify programmes as required. Conduct tooling selection and setup, ensuring the correct tools are used for each job. Perform routine maintenance on CNC machines and troubleshoot any issues that arise during operation. Collaborate with the production team to ensure timely completion of projects while adhering to quality standards. Maintain a clean and organised workspace, following all safety protocols related to materials handling and equipment use. Experience Strong mechanical knowledge with the ability to understand complex engineering drawings. Familiarity with CAD software; experience with SolidWorks is highly desirable. Competence in basic maths for precise measurements and calculations related to machining tasks. Experience in using hand tools and materials handling within a warehouse or manufacturing environment is advantageous. Ability to work independently as well as part of a team, demonstrating excellent problem-solving skills. If you are ready to take on this challenging role within a supportive environment, we look forward to receiving your application. Job Types: Full-time, Permanent Experience: CNC Milling: 1 year (preferred) Work Location: In person
Sep 04, 2025
Full time
Role : CNC Miller - Programmer, Setter,Operator Shifts : Mon-Thur: 7:30 - 16:30 Fridays 7:30 - 12:30 Job description: Overview We are seeking a skilled CNC Miller to join our dynamic team. The ideal candidate will possess a strong understanding of CNC machining processes and be able to translate engineering drawings into precise machine instructions. This role is crucial for ensuring the efficient fabrication of components while maintaining high-quality standards. If you have a passion for machining and a keen eye for detail, we encourage you to apply. Responsibilities Creating, editing and proving CNC programmes Setting and operating CNC Milling machines Interpret technical drawings and specifications to fabricate components using CNC mills. Utilise CAD software, such as SolidWorks, to create and modify programmes as required. Conduct tooling selection and setup, ensuring the correct tools are used for each job. Perform routine maintenance on CNC machines and troubleshoot any issues that arise during operation. Collaborate with the production team to ensure timely completion of projects while adhering to quality standards. Maintain a clean and organised workspace, following all safety protocols related to materials handling and equipment use. Experience Strong mechanical knowledge with the ability to understand complex engineering drawings. Familiarity with CAD software; experience with SolidWorks is highly desirable. Competence in basic maths for precise measurements and calculations related to machining tasks. Experience in using hand tools and materials handling within a warehouse or manufacturing environment is advantageous. Ability to work independently as well as part of a team, demonstrating excellent problem-solving skills. If you are ready to take on this challenging role within a supportive environment, we look forward to receiving your application. Job Types: Full-time, Permanent Experience: CNC Milling: 1 year (preferred) Work Location: In person
My client is seeking an engineer looking for an opportunity to enhance their experience and apply the skills they have to service and maintain their coffee machines within the Midlands. This role will require you to have a mechanical understanding of machines and a clean UK driving licence as this is Field Based. Experience of working a Field role is not necessary. My clients business has been around for 50+ years and has been designing, manufacturing, maintaining and distributing coffee machines independently to some of the most recognised and well known business' in Britain and around the world. With this experience they have confidently tailored to their customer's every needs, resulting to attracting clients all over the world, and supplying to almost 100 countries to date. What You'll Be Doing: Carrying out diagnostic repairs ensuring all equipment is left in perfect working order. Carrying out preventative maintenance and yearly PVIs on steam boilers (Training will be provided). Attend customer sites within agreed SLAs and complete brand standard checks Provide technical support when installing new coffee machines on site and/ or follow up Support on maintained equipment. Liaise with the inhouse team when needed. Respect and maintain all company tools, equipment, and vehicle to the highest standards, reporting anything deemed unsafe to use. Be a fantastic and approachable individual when dealing with our clients face to face or via other communication methods. What We Are Looking For From You: Employment history maintaining machines (Vending and Barista equipment desirable). Strong problem-solving skills with an electrical/mechanical background. A positive and enthusiastic individual with a genuine passion for working with machines in a customer facing environment. Computer literacy and clean UK driving licence. Please note: Applicants will only be considered if they meet the starting criteria - Have UK experience working as a Maintenance Engineer for a UK employer - Have Full British Rights to work only. - Visas of any sort or requirement of sponsorship before 2031 will not be considered. - Are a UK resident and have proof of this. - Have a UK Clean driving licence.
Sep 04, 2025
Full time
My client is seeking an engineer looking for an opportunity to enhance their experience and apply the skills they have to service and maintain their coffee machines within the Midlands. This role will require you to have a mechanical understanding of machines and a clean UK driving licence as this is Field Based. Experience of working a Field role is not necessary. My clients business has been around for 50+ years and has been designing, manufacturing, maintaining and distributing coffee machines independently to some of the most recognised and well known business' in Britain and around the world. With this experience they have confidently tailored to their customer's every needs, resulting to attracting clients all over the world, and supplying to almost 100 countries to date. What You'll Be Doing: Carrying out diagnostic repairs ensuring all equipment is left in perfect working order. Carrying out preventative maintenance and yearly PVIs on steam boilers (Training will be provided). Attend customer sites within agreed SLAs and complete brand standard checks Provide technical support when installing new coffee machines on site and/ or follow up Support on maintained equipment. Liaise with the inhouse team when needed. Respect and maintain all company tools, equipment, and vehicle to the highest standards, reporting anything deemed unsafe to use. Be a fantastic and approachable individual when dealing with our clients face to face or via other communication methods. What We Are Looking For From You: Employment history maintaining machines (Vending and Barista equipment desirable). Strong problem-solving skills with an electrical/mechanical background. A positive and enthusiastic individual with a genuine passion for working with machines in a customer facing environment. Computer literacy and clean UK driving licence. Please note: Applicants will only be considered if they meet the starting criteria - Have UK experience working as a Maintenance Engineer for a UK employer - Have Full British Rights to work only. - Visas of any sort or requirement of sponsorship before 2031 will not be considered. - Are a UK resident and have proof of this. - Have a UK Clean driving licence.
Site Automation Engineer Runcorn Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: - Inverter drives - Programmable safety systems - PLCs - Servo drives -SCADA system - Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 04, 2025
Full time
Site Automation Engineer Runcorn Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: - Inverter drives - Programmable safety systems - PLCs - Servo drives -SCADA system - Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
D R Newitt & Associates
Nottingham, Nottinghamshire
5 x Multi-Skilled Engineer (Electrical / Mechanical) Shifts: 4 on 4 off pattern, 2 Days and 2 Nights Salary: £48k - £50K ASAP Start 5x Brand New Roles - Leading Food Manufacture Why Join? One of the UK s leading food manufacturers, we provide ample opportunities for career growth and skill development. We emphasise promoting from within, ensuring you can build a rewarding career with us. About the Role We are looking for a 5 x Multi-skilled Maintenance Engineer with a mechanical background. This role involves intricate mechanical work, primarily conducted when the factory isn t running. The work is split 50/50 between reactive and planned maintenance. About You The ideal candidate will have experience within planned maintenance and will have worked in the food production industry. We are seeking someone who can be flexible, has a can-do attitude and is able to hit the ground running with minimal supervision. Key Responsibilities: • Fixing rollers, small gearboxes, and small motors • Planning maintenance work for the weekend shifts on Monday and Tuesday • Supporting with machinery breakdowns as needed • Ensuring smooth operations across both sites Key Skills/Qualifications: • Hands-on experience with minimum NVQ Level 3 in Mechanical Engineering • Experienced in planned and reactive maintenance • Strong mechanical skills and ideally some electrical knowledge and experience • Experience in manufacturing and food production • Welding skills and experience would be ideal For further details please contact Scott Ballantine at D R Newitt Recruitment
Sep 04, 2025
Full time
5 x Multi-Skilled Engineer (Electrical / Mechanical) Shifts: 4 on 4 off pattern, 2 Days and 2 Nights Salary: £48k - £50K ASAP Start 5x Brand New Roles - Leading Food Manufacture Why Join? One of the UK s leading food manufacturers, we provide ample opportunities for career growth and skill development. We emphasise promoting from within, ensuring you can build a rewarding career with us. About the Role We are looking for a 5 x Multi-skilled Maintenance Engineer with a mechanical background. This role involves intricate mechanical work, primarily conducted when the factory isn t running. The work is split 50/50 between reactive and planned maintenance. About You The ideal candidate will have experience within planned maintenance and will have worked in the food production industry. We are seeking someone who can be flexible, has a can-do attitude and is able to hit the ground running with minimal supervision. Key Responsibilities: • Fixing rollers, small gearboxes, and small motors • Planning maintenance work for the weekend shifts on Monday and Tuesday • Supporting with machinery breakdowns as needed • Ensuring smooth operations across both sites Key Skills/Qualifications: • Hands-on experience with minimum NVQ Level 3 in Mechanical Engineering • Experienced in planned and reactive maintenance • Strong mechanical skills and ideally some electrical knowledge and experience • Experience in manufacturing and food production • Welding skills and experience would be ideal For further details please contact Scott Ballantine at D R Newitt Recruitment
Job Summary Electrical and Software Modernisation Engineer required for permanent, full-time work in bristol. This role focuses on the modernization of electrical and software systems in existing packaging machinery. The ideal candidate will deliver tailored upgrade solutions, support legacy systems, and assist in integrating modern technologies into both existing and new equipment. This position requires hands-on technical expertise, strong collaboration with service and engineering teams, and frequent domestic travel. £40,000-£53,000 depending on experience Monday to Friday role Permanent role Asap Start Key Responsibilities Develop and implement electrical and software modernization solutions for legacy packaging equipment. Upgrade systems to enhance performance and extend equipment lifespan. Troubleshoot and resolve complex technical issues in collaboration with field service and engineering teams. Serve as a technical advisor for diagnostics and system improvements. Document upgrade procedures and create service support materials. Travel to customer sites for installation and commissioning of modernization projects. Support integration of new control systems into existing machinery. Assist engineering teams with new equipment development and customer projects. Perform risk assessments and ensure compliance with relevant international electrical and safety standards. Participate in project meetings and support assembly during machine builds. Stay current with emerging technologies and identify opportunities for innovation. Qualifications and Skills Bachelor's degree in Electrical Engineering or equivalent. Approximately 10 years of experience in electrical/software engineering, ideally in capital equipment or the packaging industry. Proficiency with AutoCAD Electrical or EPLAN for control system design. Advanced skills in programming PLCs, HMIs, and motion systems using Rockwell, Beckhoff, and Zenon. Experience with safety control systems (e.g., Pilz, Phoenix) and safety level analysis tools like Sistema. Solid knowledge of CE, NEC (NFPA 70/79), CSA, and UL compliance standards. Strong analytical, troubleshooting, and problem-solving skills. Familiarity with product lifecycle and Bill of Materials creation. Capable of designing for manufacturing and cost targets. Personal Attributes Highly organized, dependable, and detail-oriented. Strong communicator with both verbal and written skills. Comfortable working under pressure and in fast-paced environments. Team-oriented with a collaborative approach. Creative and enthusiastic about engineering and design. Willing to travel domestically and internationally as needed. Culturally aware with strong interpersonal skills. Committed to continuous improvement and innovation. If you are interested in this role, please apply online or for further information contact Pertemps Bristol Technical team ( - option 3 ) and speak to James Guyatt
Sep 04, 2025
Full time
Job Summary Electrical and Software Modernisation Engineer required for permanent, full-time work in bristol. This role focuses on the modernization of electrical and software systems in existing packaging machinery. The ideal candidate will deliver tailored upgrade solutions, support legacy systems, and assist in integrating modern technologies into both existing and new equipment. This position requires hands-on technical expertise, strong collaboration with service and engineering teams, and frequent domestic travel. £40,000-£53,000 depending on experience Monday to Friday role Permanent role Asap Start Key Responsibilities Develop and implement electrical and software modernization solutions for legacy packaging equipment. Upgrade systems to enhance performance and extend equipment lifespan. Troubleshoot and resolve complex technical issues in collaboration with field service and engineering teams. Serve as a technical advisor for diagnostics and system improvements. Document upgrade procedures and create service support materials. Travel to customer sites for installation and commissioning of modernization projects. Support integration of new control systems into existing machinery. Assist engineering teams with new equipment development and customer projects. Perform risk assessments and ensure compliance with relevant international electrical and safety standards. Participate in project meetings and support assembly during machine builds. Stay current with emerging technologies and identify opportunities for innovation. Qualifications and Skills Bachelor's degree in Electrical Engineering or equivalent. Approximately 10 years of experience in electrical/software engineering, ideally in capital equipment or the packaging industry. Proficiency with AutoCAD Electrical or EPLAN for control system design. Advanced skills in programming PLCs, HMIs, and motion systems using Rockwell, Beckhoff, and Zenon. Experience with safety control systems (e.g., Pilz, Phoenix) and safety level analysis tools like Sistema. Solid knowledge of CE, NEC (NFPA 70/79), CSA, and UL compliance standards. Strong analytical, troubleshooting, and problem-solving skills. Familiarity with product lifecycle and Bill of Materials creation. Capable of designing for manufacturing and cost targets. Personal Attributes Highly organized, dependable, and detail-oriented. Strong communicator with both verbal and written skills. Comfortable working under pressure and in fast-paced environments. Team-oriented with a collaborative approach. Creative and enthusiastic about engineering and design. Willing to travel domestically and internationally as needed. Culturally aware with strong interpersonal skills. Committed to continuous improvement and innovation. If you are interested in this role, please apply online or for further information contact Pertemps Bristol Technical team ( - option 3 ) and speak to James Guyatt
Site Automation Engineer Warrington Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: Inverter drives Programmable safety systems PLCs Servo drives SCADA system Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 04, 2025
Full time
Site Automation Engineer Warrington Circa £59,000 + Bonus Rotating Shift (3 Week Pattern followed by 7 off) Due to significant investment and automation activities on a large world class manufacturing site, we have a recruitment drive for PLC biased Electrical Controls Engineers. Newly created roles! Reporting to the Site Controls & Automation Manager, you will be responsible for automation, controls and electrical systems of the production plant. Key Responsibilities Site Automation Engineer Responsible for the development, implementation, documentation, test and maintenance of software, for: Inverter drives Programmable safety systems PLCs Servo drives SCADA system Operator interface (HMI) screens Train and provide advice to Engineers and Operators as required PLC alterations & improvements New installations, including programming of software Ensuring machines and equipment are safe, working efficiently and fit for purpose You ll collaborate across teams and contribute to key improvement projects, while gaining experience with a variety of control systems Diagnose and troubleshoot complex machine faults to reduce downtime Develop automation skills and techniques through OEM training Coach and mentor Maintenance Engineers on control systems Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment You ll be involved in fault-finding, diagnostics, and implementing permanent solutions to ensure safety, quality, and efficiency Requirements & Qualifications Site Automation Engineer Must possess an electrical engineering qualification (HNC/HND Level) A working knowledge of PLC systems and HMI software Experience maintaining electrical/control systems on complex process and/or high-speed production equipment Experience troubleshooting, testing, and repairing instrumentation devices Experience in PLC touch screen controls and electrical maintenance Problem solving and root cause analysis experience PLC programming skills Time served Electrical Engineer Automation / Controls apprentice with several years post qualification work experience within a manufacturing environment HNC in Electrical Engineering or equivalent Ability to fault find and implement program modifications on a range of PLCs & SCADA Knowledge of servo drives and inverters Experience of fault-finding on industrial communication networks Experience of designing & modifying control circuits and program logic What we can offer Site Automation Engineer Best-in-class learning and development support from day one Yearly Bonus Matched Pension up to 12% An industry competitive salary and benefits package, including company bonus. 25 days holiday + bank holidays with the option to buy additional plus 7 days off every 4 weeks on working pattern Share save scheme and exceptional reward events For more information on this role, please contact Andrew Haddon on (phone number removed) or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field please visit our website (url removed) Role would suit someone with a background as: an electrical maintenance engineer, PLC engineer, Automation Engineer or Electrical Engineer in a manufacturing environment Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
The Thrive Team Limited
Newcastle Upon Tyne, Tyne And Wear
An opportunity to join an exciting organisation as a Software Engineer. In the current day environment innovation in the military plays a key role and our R&D team sits in the heart of it. The team's primary responsibility is to pioneer the approaches of military robotics and autonomous systems and their machine learning (ML) components. The team is involved in the full life cycle of the project. They work closely with other leading military robotics companies and customers all over the world. To support the R&D Team, you will work with colleagues in developing and validating novel systems and software architecture for RAS implementation. You will work on developing software for our current and future products. The work can range from working on controls of RAS payloads, vehicle automation, image processing, sensor integration, digital twin integration, simulation development, algorithm testing and data analysis. You will enhance the development of the products drawing from your experience and that of your colleagues. You will have the opportunity to meet global end-users and work with them to trial your solutions in real world environments, test them on real applications and get your hands dirty, and this might be on the other side of the world. Main Duties & Responsibilities: Intergrate software components into a fully functional software system. Write clean, maintainable, and scalable code, utilizing modern software engineering practices and tools. Contribute significantly to the engineering lifecycle, including scoping, design, implementation, testing, deployment and maintenance of your team's work Collaborate with cross-functional teams to integrate software with hardware components. Participating in design reviews providing technical input through the development process. Coaching team members to improve capabilities and develop their software knowledge/expertise. Troubleshoot and resolve complex technical issues. Stay informed on current trends in the software development field and M-RAS and proactively explore their implementation within the company Qualifications, skills and experience: A degree in Software Engineering, Computer Science, Physics or Maths with a grade of at least a 2:1 or an equivalent qualification and experience. Proven experience in relevant industry that will complement and enhance RAS development Experience with Linux and developing real-time software in C/C++ or Python is essential. Experience of robotics, machine control systems and automation is desirable. A basic understanding of electronics and the ability to read electrical schematics is essential. Demonstrable knowledge and experience of current software engineering practices for RAS. Experience with ROS/ROS2, machine learning and OpenCV is advantageous. Knowledge of CODESYS or similar PLC software is beneficial. Experience working in a multi-disciplined engineering team. Ability to investigate and interpret data, issues, and situations, to make sound decisions in high-stress situations. Appetite for learning new technologies and applications. Ability to communicate complex procedures to colleagues. Self-motivating, proactive and results driven approach. Collaborative ethos is essential Competitive remuneration package offered which includes a generous annual bonus scheme. Working in a modern and spacious facility you will have access to exciting projects within a growing organisation. If you feel that you have the necessary skills and experience, we would like to hear from you.
Sep 04, 2025
Full time
An opportunity to join an exciting organisation as a Software Engineer. In the current day environment innovation in the military plays a key role and our R&D team sits in the heart of it. The team's primary responsibility is to pioneer the approaches of military robotics and autonomous systems and their machine learning (ML) components. The team is involved in the full life cycle of the project. They work closely with other leading military robotics companies and customers all over the world. To support the R&D Team, you will work with colleagues in developing and validating novel systems and software architecture for RAS implementation. You will work on developing software for our current and future products. The work can range from working on controls of RAS payloads, vehicle automation, image processing, sensor integration, digital twin integration, simulation development, algorithm testing and data analysis. You will enhance the development of the products drawing from your experience and that of your colleagues. You will have the opportunity to meet global end-users and work with them to trial your solutions in real world environments, test them on real applications and get your hands dirty, and this might be on the other side of the world. Main Duties & Responsibilities: Intergrate software components into a fully functional software system. Write clean, maintainable, and scalable code, utilizing modern software engineering practices and tools. Contribute significantly to the engineering lifecycle, including scoping, design, implementation, testing, deployment and maintenance of your team's work Collaborate with cross-functional teams to integrate software with hardware components. Participating in design reviews providing technical input through the development process. Coaching team members to improve capabilities and develop their software knowledge/expertise. Troubleshoot and resolve complex technical issues. Stay informed on current trends in the software development field and M-RAS and proactively explore their implementation within the company Qualifications, skills and experience: A degree in Software Engineering, Computer Science, Physics or Maths with a grade of at least a 2:1 or an equivalent qualification and experience. Proven experience in relevant industry that will complement and enhance RAS development Experience with Linux and developing real-time software in C/C++ or Python is essential. Experience of robotics, machine control systems and automation is desirable. A basic understanding of electronics and the ability to read electrical schematics is essential. Demonstrable knowledge and experience of current software engineering practices for RAS. Experience with ROS/ROS2, machine learning and OpenCV is advantageous. Knowledge of CODESYS or similar PLC software is beneficial. Experience working in a multi-disciplined engineering team. Ability to investigate and interpret data, issues, and situations, to make sound decisions in high-stress situations. Appetite for learning new technologies and applications. Ability to communicate complex procedures to colleagues. Self-motivating, proactive and results driven approach. Collaborative ethos is essential Competitive remuneration package offered which includes a generous annual bonus scheme. Working in a modern and spacious facility you will have access to exciting projects within a growing organisation. If you feel that you have the necessary skills and experience, we would like to hear from you.
SDET - Python- £700-£900/day via PAYE London - On-site (5 Days/Week) 6-Month Initial Contract Global Financial Services organisation undergoing a major AI-driven business transformation, they are seeking a highly skilled Software Development Engineer in Test (SDET) to join their team in London. Role Overview: As an SDET, you'll be instrumental in building and maintaining automated test frameworks and performance testing strategies. You will work closely with cross-functional teams to ensure the quality and reliability of AI and machine learning-powered solutions that are reshaping core business processes across the globe. Key Responsibilities: Design, develop, and execute automated test frameworks. Implement and manage performance testing strategies. Collaborate with engineering, data science, and DevOps teams. Ensure testing best practices are Embedded in all stages of development. Contribute to the validation of AI/ML models and services. Required Experience & Skills: Proven experience testing AI models or services. Strong Python programming skills. Expertise in Pytest , Locust , Selenium , and Playwright . Experience with performance testing tools such as JMeter or BlazeMeter . Solid understanding of AI/ML concepts and software testing methodologies. Strong problem-solving abilities in fast-paced, global environme Reasonable Adjustments: Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. If you need any help or adjustments during the recruitment process for any reason , please let us know when you apply or talk to the recruiters directly so we can support you.
Sep 04, 2025
Contractor
SDET - Python- £700-£900/day via PAYE London - On-site (5 Days/Week) 6-Month Initial Contract Global Financial Services organisation undergoing a major AI-driven business transformation, they are seeking a highly skilled Software Development Engineer in Test (SDET) to join their team in London. Role Overview: As an SDET, you'll be instrumental in building and maintaining automated test frameworks and performance testing strategies. You will work closely with cross-functional teams to ensure the quality and reliability of AI and machine learning-powered solutions that are reshaping core business processes across the globe. Key Responsibilities: Design, develop, and execute automated test frameworks. Implement and manage performance testing strategies. Collaborate with engineering, data science, and DevOps teams. Ensure testing best practices are Embedded in all stages of development. Contribute to the validation of AI/ML models and services. Required Experience & Skills: Proven experience testing AI models or services. Strong Python programming skills. Expertise in Pytest , Locust , Selenium , and Playwright . Experience with performance testing tools such as JMeter or BlazeMeter . Solid understanding of AI/ML concepts and software testing methodologies. Strong problem-solving abilities in fast-paced, global environme Reasonable Adjustments: Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. If you need any help or adjustments during the recruitment process for any reason , please let us know when you apply or talk to the recruiters directly so we can support you.
Who we are in a nutshell. At BES Group, we pride ourselves in being the leading end to end risk management solutions provider in the UK and Ireland. That means it's our job to help keep our customers' assets legally compliant, operational and, above all else, safe. And we do this with a team of the very best people, simple. What will you be doing? As a Machine Shop Engineer for BES Group, you will be prepping weld test pieces, maintaining the work shop and supporting/training more junior team members. You will be based with our team in Salford. This includes: Preparing weld test pieces for testing to ISO standards Working to drawings/iso standards Operating milling machines, lathes and band saws Ordering tooling Maintaining system under a good health and safety regime Mentoring of trainees through apprenticeship scheme As part of our team, you will get: A starting salary of £38k depending on experience Up to 10% pension contribution 2 x life cover Enhanced maternity / adoption leave Annual salary review 25 days annual leave plus 8 bank holidays An additional day's holiday for your birthday every year An extra day's holiday to take on Christmas Eve each year Access to our buy and sell holiday scheme Opportunity for flexible working Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Company wide volunteering scheme Guaranteed fundraising support for your chosen charity To be join our team as a Machine Shop Engineer, you will need: Experience in operating milling machines, lathes and band saws is essential An Engineering qualification at Level 3 or equivalent (including city and guilds) Desirable is an apprenticeship in a Machine Shop trade Ability to support and train more junior members of staff We want you to be you Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we're a Real Living Wage employer across our complete business and we are delighted to have pledged our commitment to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
Sep 04, 2025
Full time
Who we are in a nutshell. At BES Group, we pride ourselves in being the leading end to end risk management solutions provider in the UK and Ireland. That means it's our job to help keep our customers' assets legally compliant, operational and, above all else, safe. And we do this with a team of the very best people, simple. What will you be doing? As a Machine Shop Engineer for BES Group, you will be prepping weld test pieces, maintaining the work shop and supporting/training more junior team members. You will be based with our team in Salford. This includes: Preparing weld test pieces for testing to ISO standards Working to drawings/iso standards Operating milling machines, lathes and band saws Ordering tooling Maintaining system under a good health and safety regime Mentoring of trainees through apprenticeship scheme As part of our team, you will get: A starting salary of £38k depending on experience Up to 10% pension contribution 2 x life cover Enhanced maternity / adoption leave Annual salary review 25 days annual leave plus 8 bank holidays An additional day's holiday for your birthday every year An extra day's holiday to take on Christmas Eve each year Access to our buy and sell holiday scheme Opportunity for flexible working Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Company wide volunteering scheme Guaranteed fundraising support for your chosen charity To be join our team as a Machine Shop Engineer, you will need: Experience in operating milling machines, lathes and band saws is essential An Engineering qualification at Level 3 or equivalent (including city and guilds) Desirable is an apprenticeship in a Machine Shop trade Ability to support and train more junior members of staff We want you to be you Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we're a Real Living Wage employer across our complete business and we are delighted to have pledged our commitment to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
Who we are in a nutshell. At BES Group, we pride ourselves in being the leading end to end risk management solutions provider in the UK and Ireland. That means it's our job to help keep our customers assets' legally compliant, operational and, above all else, safe. And we do this with a team of the very best people, simple. Our bespoke testing solutions are reinforced by our growing network of testing labs, strategically located around the UK. Our highly skilled testing specialists are focused on machinery safety and life extension for our customers. We use a whole range of non-destructive and destructive testing methods, both on site and at our labs. What will you be doing? We are looking for an NDT Technician with a focus on Phased Array and TOFD. You will be responsible for carrying out a range of NDT inspections to ensure compliance with statutory and/or legislative requirements. The successful candidate will join the South Shields team in our enclosure and also out in the field supporting our customers. As an NDT Technician, you will: Traveling across the North East region, including potential travel across the UK. Undertaking and inspections using NDT techniques such as Phased Array and TOFD. Working on sites such as the AWL factory, ship yards, manufacturing plants, power stations and gas terminals. Providing excellent service to our Customers, including and especially when representing the company on the Customers Site. Working on equipment such as compressors, pipework and high pressure gauges. Interpret and evaluate test results. Carry out all relevant equipment checks and calibrations. Collecting, collating and reporting with sketches, where applicable, the result of the NDT examination. Present reports containing all relevant information in a factual, comprehensive and unambiguous manner. Maintain all records as per specific client contract. Utilise different pieces of technology and software to carry out reports and other documentation. Work to international standards ensuring requirements within them are met. As part of our team, you will get: From £18 per hour Annual salary review Overtime available 28 days holiday per year + statutory UK holidays An extra day's holiday to take on Christmas Eve each year Access to our buy holiday scheme Company pension scheme (Up to 8%) A comprehensive training programme with opportunities for learning different NDT Technicians and progression Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Company wide volunteering scheme Fundraising support for your chosen charity To be join our team, you will need: A PCN Level 2 in TOFD and Phased Array Additional qualifications would be beneficial such as dye pen, MPI or visual inspection IT Skills for report writing (training will be provided for specific systems) Good communication skills Good customer service skills We want you to be you! Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we're a Real Living Wage employer across our complete business and we are delighted to have pledged our committed to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
Sep 04, 2025
Full time
Who we are in a nutshell. At BES Group, we pride ourselves in being the leading end to end risk management solutions provider in the UK and Ireland. That means it's our job to help keep our customers assets' legally compliant, operational and, above all else, safe. And we do this with a team of the very best people, simple. Our bespoke testing solutions are reinforced by our growing network of testing labs, strategically located around the UK. Our highly skilled testing specialists are focused on machinery safety and life extension for our customers. We use a whole range of non-destructive and destructive testing methods, both on site and at our labs. What will you be doing? We are looking for an NDT Technician with a focus on Phased Array and TOFD. You will be responsible for carrying out a range of NDT inspections to ensure compliance with statutory and/or legislative requirements. The successful candidate will join the South Shields team in our enclosure and also out in the field supporting our customers. As an NDT Technician, you will: Traveling across the North East region, including potential travel across the UK. Undertaking and inspections using NDT techniques such as Phased Array and TOFD. Working on sites such as the AWL factory, ship yards, manufacturing plants, power stations and gas terminals. Providing excellent service to our Customers, including and especially when representing the company on the Customers Site. Working on equipment such as compressors, pipework and high pressure gauges. Interpret and evaluate test results. Carry out all relevant equipment checks and calibrations. Collecting, collating and reporting with sketches, where applicable, the result of the NDT examination. Present reports containing all relevant information in a factual, comprehensive and unambiguous manner. Maintain all records as per specific client contract. Utilise different pieces of technology and software to carry out reports and other documentation. Work to international standards ensuring requirements within them are met. As part of our team, you will get: From £18 per hour Annual salary review Overtime available 28 days holiday per year + statutory UK holidays An extra day's holiday to take on Christmas Eve each year Access to our buy holiday scheme Company pension scheme (Up to 8%) A comprehensive training programme with opportunities for learning different NDT Technicians and progression Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Company wide volunteering scheme Fundraising support for your chosen charity To be join our team, you will need: A PCN Level 2 in TOFD and Phased Array Additional qualifications would be beneficial such as dye pen, MPI or visual inspection IT Skills for report writing (training will be provided for specific systems) Good communication skills Good customer service skills We want you to be you! Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we're a Real Living Wage employer across our complete business and we are delighted to have pledged our committed to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
Job Description Digital Research Engineer Derby Hybrid - Minimum 3 days on site Full time 37 hours per week Rolls Royce is one of few organisations on the planet with the creativity, courage and agility, the scope of technology and the breadth of expertise to tackle the biggest challenges facing the world. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing We have a technically challenging Research Engineer role in the Future Methods team in the Research and Technology organisation within RR. This team is required to radically enhance the methods and software that are used across RR globally, to drive innovation and efficiency into our ever more environmentally friendly products and services. You'll be working with the latest technology, alongside diverse and talented people, on live projects that really matter. You'll have the chance to gain valuable experience in areas such as Innovation, Digital, Design and Future Products and get an amazing insight into the way we work, and the culture of Rolls-Royce. You will work on state-of-the-art research programmes including working with external organisations, start-ups, and research establishments, leading and supporting externally funded activities. You will develop and drive the next generation of component system methods, developing technologies, algorithms and software. Key Activities Include: Drive step change efficiency in the design, manufacture, analysis and delivery of new components through automation, standardised processes and innovative systems.Support the development, design and integration of systems that enable seamless engineering workflows from specification, behaviour analysis, integrity assessment to viable manufacture.Collaborate with cross-functional teams in Engineering, IT, and Supply Chain to deliver truly innovative solutions.Apply skills in software, computational analysis, and mechanical engineering to support product development.Influence the adoption of new technologies, engineering capabilities, and cultural change across RR and external partners.Engage with a wide range of internal and external stakeholders to deliver technical and commercial goals.Participate in horizon scanning to identify and evaluate, emerging design system technologies. Who we are looking for: We are looking for talented individuals that embrace agility, are bold, pursue collaboration and seek simplicity in everything they do. We are a small but diverse team so we are looking for people who can operate in a collaborative and open environment. Educated to degree level in a STEM (Computational Science, Software, Mechanical Engineering, Mathematics, Science or Computational based disciplines) discipline or equivalent qualification, with broad postgraduate experience relevant to the design systems role above. Cross sector experience would be highly valuableA strong understanding (through academic studies or practical experience) of Computational Science, Software, Mechanical Engineering, Mathematics or Science.An ability to communicate effectively on complex technical issues and good coding, analysis, CAD / geometry & other computational design tool abilities are important.Programming experience in software e.g. Python, C, C++ , cloud computing, microservices, containerisation and machine learning is desirable.Good interpersonal/consultancy skills and an ability to actively engage with experts and domain specialists from universities, other businesses including start-ups and software/hardware vendors globally.Ability to deal with ambiguity and be self-directed. You will be genuinely passionate and curious about technology and engineering design and how we can make a difference to our world. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. We welcome applications from people with a refugee background. Closing Date 30/09/2025 - Applications will be reviewed when received, successful applicants will be invited to attend an interview prior to the closing date advertised. Job Category Mechanical Systems Posting Date 03 Sept 2025; 00:09 Posting End Date 30 Sept 2025PandoLogic.
Sep 04, 2025
Full time
Job Description Digital Research Engineer Derby Hybrid - Minimum 3 days on site Full time 37 hours per week Rolls Royce is one of few organisations on the planet with the creativity, courage and agility, the scope of technology and the breadth of expertise to tackle the biggest challenges facing the world. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing We have a technically challenging Research Engineer role in the Future Methods team in the Research and Technology organisation within RR. This team is required to radically enhance the methods and software that are used across RR globally, to drive innovation and efficiency into our ever more environmentally friendly products and services. You'll be working with the latest technology, alongside diverse and talented people, on live projects that really matter. You'll have the chance to gain valuable experience in areas such as Innovation, Digital, Design and Future Products and get an amazing insight into the way we work, and the culture of Rolls-Royce. You will work on state-of-the-art research programmes including working with external organisations, start-ups, and research establishments, leading and supporting externally funded activities. You will develop and drive the next generation of component system methods, developing technologies, algorithms and software. Key Activities Include: Drive step change efficiency in the design, manufacture, analysis and delivery of new components through automation, standardised processes and innovative systems.Support the development, design and integration of systems that enable seamless engineering workflows from specification, behaviour analysis, integrity assessment to viable manufacture.Collaborate with cross-functional teams in Engineering, IT, and Supply Chain to deliver truly innovative solutions.Apply skills in software, computational analysis, and mechanical engineering to support product development.Influence the adoption of new technologies, engineering capabilities, and cultural change across RR and external partners.Engage with a wide range of internal and external stakeholders to deliver technical and commercial goals.Participate in horizon scanning to identify and evaluate, emerging design system technologies. Who we are looking for: We are looking for talented individuals that embrace agility, are bold, pursue collaboration and seek simplicity in everything they do. We are a small but diverse team so we are looking for people who can operate in a collaborative and open environment. Educated to degree level in a STEM (Computational Science, Software, Mechanical Engineering, Mathematics, Science or Computational based disciplines) discipline or equivalent qualification, with broad postgraduate experience relevant to the design systems role above. Cross sector experience would be highly valuableA strong understanding (through academic studies or practical experience) of Computational Science, Software, Mechanical Engineering, Mathematics or Science.An ability to communicate effectively on complex technical issues and good coding, analysis, CAD / geometry & other computational design tool abilities are important.Programming experience in software e.g. Python, C, C++ , cloud computing, microservices, containerisation and machine learning is desirable.Good interpersonal/consultancy skills and an ability to actively engage with experts and domain specialists from universities, other businesses including start-ups and software/hardware vendors globally.Ability to deal with ambiguity and be self-directed. You will be genuinely passionate and curious about technology and engineering design and how we can make a difference to our world. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. We welcome applications from people with a refugee background. Closing Date 30/09/2025 - Applications will be reviewed when received, successful applicants will be invited to attend an interview prior to the closing date advertised. Job Category Mechanical Systems Posting Date 03 Sept 2025; 00:09 Posting End Date 30 Sept 2025PandoLogic.
Job Title: SC Cleared Level 2-3 Platform Engineer Location: Corsham & occasional visits to Portsmouth Employment Type: Contract Salary Range: Up to 600 per day via an approved umbrella company Role Overview We are seeking a skilled and proactive Level 2-3 Platform Engineer to support the installation, configuration, and maintenance of hardware and software systems used in test and reference environments. These environments directly support deployed live IT systems and are critical to the operations of the Core Engineering, Test, and Live Service Management teams. The role involves working with technologies including VMware, Windows, Linux, and Cisco, and requires hands-on experience in both virtual and physical infrastructure. Key Responsibilities Install and configure virtual machines, networks, and software following system administration guides and work instructions. Apply updates and patches using MECM and WSUS. Install and configure operating systems, antivirus software, and other applications. Set up and maintain IT hardware, including lifting and installing heavy equipment. Proactively monitor complex environments and record issues, faults, and resolutions. Diagnose and resolve network, hardware, and software issues. Conduct root-cause analysis and propose resolutions for technical issues across Windows/Linux servers, virtualisation, and networking. Maintain inventories of hardware/software and manage logistics for replacements. Manage server backups and ensure data integrity. Maintain network connectivity and accurately document changes. Essential Skills & Experience Ability to work on-site at MOD Corsham and PTP within a close-knit team. Experience with: Microsoft Active Directory, Group Policy, and DNS Microsoft Server OS (ideally 2012R2, 2019) and Windows 10 VMware vCenter and virtualised environments Various computer hardware platforms Physically able to lift and install heavy equipment. Desirable Skills Administration of: Microsoft Exchange Server 2016 Skype Server 2016 SharePoint Server SQL Server 2016 Trend DSM VEEAM SolarWinds Amulet Hotkey Zero Clients Meinburg NTP VMware Horizon and AppVolumes Microsoft Endpoint Connection Manager Knowledge of: ADFS Windows PKI (especially within Defence or DPKI) VMware NSX and microsegmentation Cryptographic material handling and accounting Linux systems Cisco networking products Willingness to work outside normal hours, including on-call duties (average one week in six). If this is the role for you please submit your CV at your earliest convenience
Sep 04, 2025
Contractor
Job Title: SC Cleared Level 2-3 Platform Engineer Location: Corsham & occasional visits to Portsmouth Employment Type: Contract Salary Range: Up to 600 per day via an approved umbrella company Role Overview We are seeking a skilled and proactive Level 2-3 Platform Engineer to support the installation, configuration, and maintenance of hardware and software systems used in test and reference environments. These environments directly support deployed live IT systems and are critical to the operations of the Core Engineering, Test, and Live Service Management teams. The role involves working with technologies including VMware, Windows, Linux, and Cisco, and requires hands-on experience in both virtual and physical infrastructure. Key Responsibilities Install and configure virtual machines, networks, and software following system administration guides and work instructions. Apply updates and patches using MECM and WSUS. Install and configure operating systems, antivirus software, and other applications. Set up and maintain IT hardware, including lifting and installing heavy equipment. Proactively monitor complex environments and record issues, faults, and resolutions. Diagnose and resolve network, hardware, and software issues. Conduct root-cause analysis and propose resolutions for technical issues across Windows/Linux servers, virtualisation, and networking. Maintain inventories of hardware/software and manage logistics for replacements. Manage server backups and ensure data integrity. Maintain network connectivity and accurately document changes. Essential Skills & Experience Ability to work on-site at MOD Corsham and PTP within a close-knit team. Experience with: Microsoft Active Directory, Group Policy, and DNS Microsoft Server OS (ideally 2012R2, 2019) and Windows 10 VMware vCenter and virtualised environments Various computer hardware platforms Physically able to lift and install heavy equipment. Desirable Skills Administration of: Microsoft Exchange Server 2016 Skype Server 2016 SharePoint Server SQL Server 2016 Trend DSM VEEAM SolarWinds Amulet Hotkey Zero Clients Meinburg NTP VMware Horizon and AppVolumes Microsoft Endpoint Connection Manager Knowledge of: ADFS Windows PKI (especially within Defence or DPKI) VMware NSX and microsegmentation Cryptographic material handling and accounting Linux systems Cisco networking products Willingness to work outside normal hours, including on-call duties (average one week in six). If this is the role for you please submit your CV at your earliest convenience
Who we are in a nutshell. At BES Group, we pride ourselves on being the leading end to end risk management solutions provider in the UK and Ireland. This means it's our job to help keep our customers assets' legally compliant, operational and, above all else, safe. We're able to achieve this with a team of only the very best, most talented people. With our specialist asset reliability services, we help prevent machinery failures and, as a result, unscheduled (and, very often, costly) downtime for our customers. We're all about operational efficiency and our team of highly skilled reliability engineers not only use, but also develop and produce, some of the most sophisticated technology to help keep our customer's assets doing what they need to, without any unexpected surprises along the way. To be considered for this role you will ideally live in or close by to Newcastle or Durham and be willing to travel across the South Scotland / North East England area. What will you be doing? We have over 40 Reliability Engineers in the UK, carrying out vibration analysis, remote data analysis, thermography surveys and much more! As a Reliability Engineer for BES Asset Reliability, you will: Carry out condition based maintenance (CBM) techniques utilising vibration analysis, ultrasound, thermography and oil analysis Perform data collection - the analysis of equipment performance, failure data and corrective maintenance history Assess and report on machine performance and recommend improvements Spec, set up and installation of online and wireless systems or remote sensors Always provide the exceptional level of customer service expected from our team, whilst representing our brilliant company professionally As part of our team, you will get: A minimum standard starting salary from £37,000 depending on experience £5000 annual car cash allowance Company Pension Scheme Annual salary review 25 days annual leave plus 8 bank holidays An extra day's holiday to take on Christmas Eve each year Access to our buy and sell holiday scheme Opportunity for flexible working Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Opportunity to attend volunteer days Guaranteed fundraising support for your chosen charity To join our team, you will need: Ideally a background in engineering within the marine, rail, or manufacturing environment Level 1 Vibration Analysis or working towards this is essential Experience or knowledge of Vibration Analysis Experience or knowledge of condition monitoring hardware and software A Mechanical Engineering qualification (level 3 upwards) is highly regarded Flexibility to work away and travel as per business and customer requirements Full UK driving license We want you to be you! Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we're a Real Living Wage employer across our complete business and we are delighted to have pledged our commitment to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
Sep 04, 2025
Full time
Who we are in a nutshell. At BES Group, we pride ourselves on being the leading end to end risk management solutions provider in the UK and Ireland. This means it's our job to help keep our customers assets' legally compliant, operational and, above all else, safe. We're able to achieve this with a team of only the very best, most talented people. With our specialist asset reliability services, we help prevent machinery failures and, as a result, unscheduled (and, very often, costly) downtime for our customers. We're all about operational efficiency and our team of highly skilled reliability engineers not only use, but also develop and produce, some of the most sophisticated technology to help keep our customer's assets doing what they need to, without any unexpected surprises along the way. To be considered for this role you will ideally live in or close by to Newcastle or Durham and be willing to travel across the South Scotland / North East England area. What will you be doing? We have over 40 Reliability Engineers in the UK, carrying out vibration analysis, remote data analysis, thermography surveys and much more! As a Reliability Engineer for BES Asset Reliability, you will: Carry out condition based maintenance (CBM) techniques utilising vibration analysis, ultrasound, thermography and oil analysis Perform data collection - the analysis of equipment performance, failure data and corrective maintenance history Assess and report on machine performance and recommend improvements Spec, set up and installation of online and wireless systems or remote sensors Always provide the exceptional level of customer service expected from our team, whilst representing our brilliant company professionally As part of our team, you will get: A minimum standard starting salary from £37,000 depending on experience £5000 annual car cash allowance Company Pension Scheme Annual salary review 25 days annual leave plus 8 bank holidays An extra day's holiday to take on Christmas Eve each year Access to our buy and sell holiday scheme Opportunity for flexible working Electric Vehicle salary sacrifice scheme Discounts and savings via our employee benefits portal Health and wellbeing support via our Employee Assistance Programme Opportunity to attend volunteer days Guaranteed fundraising support for your chosen charity To join our team, you will need: Ideally a background in engineering within the marine, rail, or manufacturing environment Level 1 Vibration Analysis or working towards this is essential Experience or knowledge of Vibration Analysis Experience or knowledge of condition monitoring hardware and software A Mechanical Engineering qualification (level 3 upwards) is highly regarded Flexibility to work away and travel as per business and customer requirements Full UK driving license We want you to be you! Our focus on diversity, equality and inclusion is here to stay. Our team is made up of some of the most skilled and talented people and that's what matters to us. At BES Group, we want our people to know that they can be their true authentic selves at work, it really is that simple. What's more, we're a Real Living Wage employer across our complete business and we are delighted to have pledged our commitment to the military community by signing the Armed Forces Covenant. Go for it! Research suggests that some people tend to only apply for roles if they meet all requirements. If you don't meet every point above, but still feel like you could really help make a difference in this role, please apply, you might be exactly what we're looking for. To apply for this role, simply click "Apply". We ask for some basic contact information and a CV or your LinkedIn profile, it's that easy! Please note, successful candidates will be required to complete the relevant background checks as part of the recruitment process. BES Group, where our people and our customers come before everything else.
Systems Engineer (Windows and Linux) Systems Engineer (Windows and Linux) Hybrid-working from Manchester £55,000 to £60,000 per year Plus excellent company benefits and incentives The Opportunity: I'm on the lookout for Systems Engineer to provide technical support for a field engineering team who are undertaking installation, commissioning and maintenance activities for technologies on the UK motorway network. You will support the operation of a national communication system, providing operational and technical support to customers, system users and other stakeholders while ensuring delivery and maintenance tasks are undertaken to a high standard. Skills and Experience: A proven background working as a Systems Engineer in an engineering environment (Defence, Telecoms, Rail, Highways, Energy, etc.) Strong IP Networking skills including addressing, subnetting IP Networks, routing, etc. Experience working with highways technology or traffic signals would be highly desirable Windows and Linux configuration and system administration skills, including experience with the following: Build and maintain clusters Operation of Hypervisor and virtual machines within clusters System administration with products such as Linux and LUCI Linux Shell and Scripting tools including bash Disk partitioning Role and Responsibilities: Support the operations of a team working on the live national communication system Provide operational and technical support to customers, system users and other stakeholders Undertake fault investigation and dissemination of relevant diagnostic information Produce technical documents, system design specifications, test specifications, etc. Applications: For further information on this role and some of the opportunities we have working as a Windows/Linux Systems Engineer based in Manchester; please contact James here at ISR to learn more about our client leading the way in developing the next-generation of transport mobility through innovation and transformational technology?
Sep 04, 2025
Full time
Systems Engineer (Windows and Linux) Systems Engineer (Windows and Linux) Hybrid-working from Manchester £55,000 to £60,000 per year Plus excellent company benefits and incentives The Opportunity: I'm on the lookout for Systems Engineer to provide technical support for a field engineering team who are undertaking installation, commissioning and maintenance activities for technologies on the UK motorway network. You will support the operation of a national communication system, providing operational and technical support to customers, system users and other stakeholders while ensuring delivery and maintenance tasks are undertaken to a high standard. Skills and Experience: A proven background working as a Systems Engineer in an engineering environment (Defence, Telecoms, Rail, Highways, Energy, etc.) Strong IP Networking skills including addressing, subnetting IP Networks, routing, etc. Experience working with highways technology or traffic signals would be highly desirable Windows and Linux configuration and system administration skills, including experience with the following: Build and maintain clusters Operation of Hypervisor and virtual machines within clusters System administration with products such as Linux and LUCI Linux Shell and Scripting tools including bash Disk partitioning Role and Responsibilities: Support the operations of a team working on the live national communication system Provide operational and technical support to customers, system users and other stakeholders Undertake fault investigation and dissemination of relevant diagnostic information Produce technical documents, system design specifications, test specifications, etc. Applications: For further information on this role and some of the opportunities we have working as a Windows/Linux Systems Engineer based in Manchester; please contact James here at ISR to learn more about our client leading the way in developing the next-generation of transport mobility through innovation and transformational technology?
