Job Purpose The role provides the business with the skills to set and operate the Manual Lathes and Manual Milling machines in line with the delivery requirements of the business. This will include Jig and Fixture making, ensuring that products are produced efficiently; that they are of the right quality, quantity, and cost; and that they are produced on time. Key Accountabilities Take responsibility for themselves and others to ensure work is carried out safely and in line with the Company s Health and Safety policies and procedures. Take responsibility for the Quality and Inspection of their own work and take ownership for cleaning and de-burring of the parts. Maintain good standards and support a culture of 5S plus Safety in the way you carry out your work. Set the machines using best practice. Work to the priorities as Set Out by Production Supervision. All production hours must be captured through the booking of time on the works traveller onto the company Visual system. All non-productive hours must be captured through the booking of time on the relevant Fault Code through Visual. Run the machines in line with the cycle time and the estimated costed time given on the works traveller. Carry out in cycle inspection of the parts produced, using micrometres, verniers and coordinate measuring machine reports. Where required the completion of an Actual Dimensional Report Sheet (ADRS) for each part may need to be completed. Where necessary work with Production Engineering to come up with designs for Jigs & fixturing. Ensure good and professional communication is maintained with other colleagues in your area and with chargehands & supervision Support the work of the company apprenticeship programme through support with their on-the-job learning. Ensuring Non-Conforming parts are reported immediately, with root cause established and documented and pasted to the Machine Shop Supervisor. Perform any other duty as requested by the Production Supervisor or Machine Shop Chargehand to ensure the objectives of the company and the expectations of the customer are met. What we will offer: At LB Bentley, we offer more than just a salary. You ll be joining a business built on quality and innovation, our people are empowered to bring their whole self to work. We offer a range of additional rewards and benefits including: Salary exchange Company pension scheme (7% Company/5% employee contribution) 25 days holiday per annum plus bank holidays Life Assurance 3x salary Peer-to-peer recognition scheme Early finish Friday Christmas shutdown Bonus Scheme up to £1,500 per annum Equal Opportunities At LB Bentley we are guided by our values in everything we do and recognise that being a diverse and inclusive employer is fundamental to our success. We welcome applications from candidates from all backgrounds and do not discriminate based on disability, age, gender reassignment, marriage or civil partnership status, national origin, pregnancy and maternity status, race, religion or belief, sex, and sexual orientation. Please note that we will review candidates as applications are received, this vacancy may close earlier than the advertised closing date if a suitable candidate is found.
Sep 03, 2025
Full time
Job Purpose The role provides the business with the skills to set and operate the Manual Lathes and Manual Milling machines in line with the delivery requirements of the business. This will include Jig and Fixture making, ensuring that products are produced efficiently; that they are of the right quality, quantity, and cost; and that they are produced on time. Key Accountabilities Take responsibility for themselves and others to ensure work is carried out safely and in line with the Company s Health and Safety policies and procedures. Take responsibility for the Quality and Inspection of their own work and take ownership for cleaning and de-burring of the parts. Maintain good standards and support a culture of 5S plus Safety in the way you carry out your work. Set the machines using best practice. Work to the priorities as Set Out by Production Supervision. All production hours must be captured through the booking of time on the works traveller onto the company Visual system. All non-productive hours must be captured through the booking of time on the relevant Fault Code through Visual. Run the machines in line with the cycle time and the estimated costed time given on the works traveller. Carry out in cycle inspection of the parts produced, using micrometres, verniers and coordinate measuring machine reports. Where required the completion of an Actual Dimensional Report Sheet (ADRS) for each part may need to be completed. Where necessary work with Production Engineering to come up with designs for Jigs & fixturing. Ensure good and professional communication is maintained with other colleagues in your area and with chargehands & supervision Support the work of the company apprenticeship programme through support with their on-the-job learning. Ensuring Non-Conforming parts are reported immediately, with root cause established and documented and pasted to the Machine Shop Supervisor. Perform any other duty as requested by the Production Supervisor or Machine Shop Chargehand to ensure the objectives of the company and the expectations of the customer are met. What we will offer: At LB Bentley, we offer more than just a salary. You ll be joining a business built on quality and innovation, our people are empowered to bring their whole self to work. We offer a range of additional rewards and benefits including: Salary exchange Company pension scheme (7% Company/5% employee contribution) 25 days holiday per annum plus bank holidays Life Assurance 3x salary Peer-to-peer recognition scheme Early finish Friday Christmas shutdown Bonus Scheme up to £1,500 per annum Equal Opportunities At LB Bentley we are guided by our values in everything we do and recognise that being a diverse and inclusive employer is fundamental to our success. We welcome applications from candidates from all backgrounds and do not discriminate based on disability, age, gender reassignment, marriage or civil partnership status, national origin, pregnancy and maternity status, race, religion or belief, sex, and sexual orientation. Please note that we will review candidates as applications are received, this vacancy may close earlier than the advertised closing date if a suitable candidate is found.
MANUAL MILLER/HORIZONTAL BORER We are recruiting for an experienced Manual Miller/Horizontal Borer to work for our client who are located in Bradford, West Yorkshire. THE DUTIES OF A MANUAL MILLER/HORIZONTAL BORER: Operate and set up Manual Milling machines and work to tight precisions. Read and interpret Engineering drawings Select and install appropriate tools, fixtures, and workpieces on the machine. Operate drilling machine and maintain it. ESSENTIAL EXPERIENCES & SKILLS: Minimum 2 years' experience working within a high precision manufacturing background Excellent communication skills THE HOURS: You will be on the day shift: Monday Thursday 7am-4pm and Friday 7am-12pm. THE PAY: You will earn an hourly rate of £14.66. Questech Recruitment is a specialist engineering support within the Mechanical & Engineering industry, our focus is to support many clients within the M&E Sectors. If you feel you match the desired criteria, or you would like more information on roles such as CNC Machinist , CNC Programmer, CNC Setter , CNC Operator, we would really like to hear from you.
Sep 03, 2025
Full time
MANUAL MILLER/HORIZONTAL BORER We are recruiting for an experienced Manual Miller/Horizontal Borer to work for our client who are located in Bradford, West Yorkshire. THE DUTIES OF A MANUAL MILLER/HORIZONTAL BORER: Operate and set up Manual Milling machines and work to tight precisions. Read and interpret Engineering drawings Select and install appropriate tools, fixtures, and workpieces on the machine. Operate drilling machine and maintain it. ESSENTIAL EXPERIENCES & SKILLS: Minimum 2 years' experience working within a high precision manufacturing background Excellent communication skills THE HOURS: You will be on the day shift: Monday Thursday 7am-4pm and Friday 7am-12pm. THE PAY: You will earn an hourly rate of £14.66. Questech Recruitment is a specialist engineering support within the Mechanical & Engineering industry, our focus is to support many clients within the M&E Sectors. If you feel you match the desired criteria, or you would like more information on roles such as CNC Machinist , CNC Programmer, CNC Setter , CNC Operator, we would really like to hear from you.
Recruit4staff are representing a well-established precision engineering company in their search for a Manual Machinist to work in Birkenhead Job Role: Operating within a precision engineering environment, the Manual Machinist will be responsible for setting and operating manual milling machines, tool changing, and interpreting engineering drawings. The role involves working with machines such as Dean Smith & Grace, Colchester Mastiff, Ajax Lathes and XYZ Proturn lathes to produce bespoke and small-batch orders to tight tolerances. Job Details: Pay: Up to £36,000 per annum Up to £18.50 per hour Hours of Work: 37.5 hours per week Monday to Friday, 8am till 4:30pm, 2:30pm finish on Friday Duration: Permanent Benefits: Overtime available Training and development opportunities provided On-site showers & canteen 23 days holiday plus Bank Holidays Fuel allowance for candidates over 20 miles from workshop Bridge/Tunnel toll costs covered by our client Essential Skills & Experience: Setting & operating a manual milling machine Working from drawings and working to tight tolerances Desired Skills & Experience: Experienced using manual lathe turners Experienced tool maker Experienced setting & operating CNC machine centres (Milling/Turning) Essential Qualifications: City & Guilds/NVQ or equivalent in Mechanical Engineering Commutable From: Birkenhead, Bromborough, Chester, Ellesmere Port, Deeside, Wrexham, Liverpool, Runcorn Similar Job Titles: Manual Machinist, Manual Miller, Precision Engineer, Toolmaker, Tool Maker, Mechanical Engineer, CNC Machinist For further information about this role, please apply now. This vacancy is being advertised on behalf of Recruit4staff , who are operating as a recruitment agency.
Sep 01, 2025
Full time
Recruit4staff are representing a well-established precision engineering company in their search for a Manual Machinist to work in Birkenhead Job Role: Operating within a precision engineering environment, the Manual Machinist will be responsible for setting and operating manual milling machines, tool changing, and interpreting engineering drawings. The role involves working with machines such as Dean Smith & Grace, Colchester Mastiff, Ajax Lathes and XYZ Proturn lathes to produce bespoke and small-batch orders to tight tolerances. Job Details: Pay: Up to £36,000 per annum Up to £18.50 per hour Hours of Work: 37.5 hours per week Monday to Friday, 8am till 4:30pm, 2:30pm finish on Friday Duration: Permanent Benefits: Overtime available Training and development opportunities provided On-site showers & canteen 23 days holiday plus Bank Holidays Fuel allowance for candidates over 20 miles from workshop Bridge/Tunnel toll costs covered by our client Essential Skills & Experience: Setting & operating a manual milling machine Working from drawings and working to tight tolerances Desired Skills & Experience: Experienced using manual lathe turners Experienced tool maker Experienced setting & operating CNC machine centres (Milling/Turning) Essential Qualifications: City & Guilds/NVQ or equivalent in Mechanical Engineering Commutable From: Birkenhead, Bromborough, Chester, Ellesmere Port, Deeside, Wrexham, Liverpool, Runcorn Similar Job Titles: Manual Machinist, Manual Miller, Precision Engineer, Toolmaker, Tool Maker, Mechanical Engineer, CNC Machinist For further information about this role, please apply now. This vacancy is being advertised on behalf of Recruit4staff , who are operating as a recruitment agency.
Jonathan Lee Recruitment Ltd
Summerfield, Worcestershire
Manual Machinist Worcestershire An exciting opportunity has arisen for a self-motivated individual who would like to join a progressing company. This role is based within an established Production department; therefore, a strong team player attitude is essential. Summary of Job: To undertake machining duties, as required, in accordance with the company quality standards and best engineering working practices To undertake activities in a timely and efficient manner in order to maintain company contractual delivery requirements To assist, where required, in peripheral activities, e.g., assembly, packing, etc Qualifications, Experience & Skills Must be experienced using machinery such as vertical/horizontal borers, lathes and drilling machines Maths and English GCSE grade 4/5 (equivalent grade C equivalent) is preferable but not essential Benefits Company bonus Company pension scheme Life insurance (death in service) 23 days holiday (19 floating days, 4 fixed towards Christmas shut-down) +extra service days +Bank Holidays +Birthday Leave (after 2 full calendar years' service) Training opportunities Free eye tests and contribution towards lenses/spectacles, if eligible Social events organised and funded by the company Hours of work Works hours enable flexitime working, covering a 40 hour week. Flexible start and finish times are available with core hours which must be covered each day. Monday to Thursday covers an 8.5 hour shift with half an hour unpaid lunch break and a ten minute paid break in the morning and afternoon, Friday covers a 6 hour shift with no lunch break but does include a twenty minute paid break. Overtime is available dependent upon workload, further details will be given at interview stage. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Sep 01, 2025
Full time
Manual Machinist Worcestershire An exciting opportunity has arisen for a self-motivated individual who would like to join a progressing company. This role is based within an established Production department; therefore, a strong team player attitude is essential. Summary of Job: To undertake machining duties, as required, in accordance with the company quality standards and best engineering working practices To undertake activities in a timely and efficient manner in order to maintain company contractual delivery requirements To assist, where required, in peripheral activities, e.g., assembly, packing, etc Qualifications, Experience & Skills Must be experienced using machinery such as vertical/horizontal borers, lathes and drilling machines Maths and English GCSE grade 4/5 (equivalent grade C equivalent) is preferable but not essential Benefits Company bonus Company pension scheme Life insurance (death in service) 23 days holiday (19 floating days, 4 fixed towards Christmas shut-down) +extra service days +Bank Holidays +Birthday Leave (after 2 full calendar years' service) Training opportunities Free eye tests and contribution towards lenses/spectacles, if eligible Social events organised and funded by the company Hours of work Works hours enable flexitime working, covering a 40 hour week. Flexible start and finish times are available with core hours which must be covered each day. Monday to Thursday covers an 8.5 hour shift with half an hour unpaid lunch break and a ten minute paid break in the morning and afternoon, Friday covers a 6 hour shift with no lunch break but does include a twenty minute paid break. Overtime is available dependent upon workload, further details will be given at interview stage. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Thrive Oldham are recruiting on behalf of our well established client in the Torfaen area a Manual Machinist. Job Description We are currently looking for a Machinist/Trainee Machinist to join our facility, South Wales. The key function of the Machinist role will be to work as part of a team to process product through the Machine Shop that is produced right first time and that is delivered to the Customer in line with their expectations and requirements. Principle Accountabilities: Work as part of a team to achieve departmental KPIs with respect to Right First Time, On Time In Full, Productivity etc. Operate manual vertical turning lathes and CNC vertical and horizontal turning lathes to process product in line with the method of manufacture ensuring that the relevant standard operating procedure is followed at all times. Read and interpret engineering drawings to ensure a conforming product produced to the customer specification. Setting of tooling Record on a daily basis key data and information in accordance with the relevant system and/or process including but not limited to logging production throughput data onto EFACS, raising non-conformance notes, creating and storing data records, writing dimensional reports etc. Encourage and actively contribute to a culture of continuous improvement by performing daily TPM, and 5S activities. The successful candidate will have the following skills/experience: Willingness to learn and follow instruction High self-motivation and determination to succeed GCSE or equivalent in Maths and English Computer literate Good interpersonal skills, particularly team working Excellent time management Excellent attention to detail along with good verbal and written communication The following skills/experience would be advantageous: Experience of working within heavy manufacturing Manual Machining experience (both manual and CNC) .Ability to read and interpret engineering drawings (2D) detailed written instructions Familiar with machining special alloy materials Experience in programming Experience of Fannuc control system 10% shift allowance 5.30-1.30 Mon to Thurs, 5.30-10.30 Fri 14.00-22.30 Mon to Thurs, 10.30-15.30 Fri Will be moving to 3 shift pattern in the future Permanent role Please note that due to high volumes of applicants we can only contact successful shortlisted candidates. If you do not hear from us in 7 days then unfortunately you have been unsuccessful. Salary Dependant on Experience INDOLD
Sep 01, 2025
Full time
Thrive Oldham are recruiting on behalf of our well established client in the Torfaen area a Manual Machinist. Job Description We are currently looking for a Machinist/Trainee Machinist to join our facility, South Wales. The key function of the Machinist role will be to work as part of a team to process product through the Machine Shop that is produced right first time and that is delivered to the Customer in line with their expectations and requirements. Principle Accountabilities: Work as part of a team to achieve departmental KPIs with respect to Right First Time, On Time In Full, Productivity etc. Operate manual vertical turning lathes and CNC vertical and horizontal turning lathes to process product in line with the method of manufacture ensuring that the relevant standard operating procedure is followed at all times. Read and interpret engineering drawings to ensure a conforming product produced to the customer specification. Setting of tooling Record on a daily basis key data and information in accordance with the relevant system and/or process including but not limited to logging production throughput data onto EFACS, raising non-conformance notes, creating and storing data records, writing dimensional reports etc. Encourage and actively contribute to a culture of continuous improvement by performing daily TPM, and 5S activities. The successful candidate will have the following skills/experience: Willingness to learn and follow instruction High self-motivation and determination to succeed GCSE or equivalent in Maths and English Computer literate Good interpersonal skills, particularly team working Excellent time management Excellent attention to detail along with good verbal and written communication The following skills/experience would be advantageous: Experience of working within heavy manufacturing Manual Machining experience (both manual and CNC) .Ability to read and interpret engineering drawings (2D) detailed written instructions Familiar with machining special alloy materials Experience in programming Experience of Fannuc control system 10% shift allowance 5.30-1.30 Mon to Thurs, 5.30-10.30 Fri 14.00-22.30 Mon to Thurs, 10.30-15.30 Fri Will be moving to 3 shift pattern in the future Permanent role Please note that due to high volumes of applicants we can only contact successful shortlisted candidates. If you do not hear from us in 7 days then unfortunately you have been unsuccessful. Salary Dependant on Experience INDOLD
CNC operatives, we are looking for CNC Machinists working from our manufacturing site based in Normanton, West Yorkshire. This is for a 3 day weekend shift (Friday/Sat/Sun), initial training will be on the day shift Monday to Friday (Apply online only). Training will be for approx 5 weeks. The Role: Successful candidate will undertake the CNC cutting of granite and other solid surfaces for fabrication. Duties of the Role To undertake the CNC cutting of granite and other solid surfaces to accurate dimensions for fabrication Ability to interpret dimensions from drawings, templates and formers To ensure an effective use of materials from cutting lists Ability to use CAD Cam Clean and maintain machinery and tools Maintain a tidy work area. Previous experience of worktop manufacture and use of Auto CAD would be a distinct advantage but is not essential as training will be provided. Experience of working within a fast paced and demanding manufacturing environment would be a distinct advantage. We are looking for people who are able to work to deadlines and have a flexible approach to workload and duties. Applicants should note this is physically demanding role with manual handling and heavy lifting involved. 19.56phr + Shift Allowance Working on the weekend shift Friday/Sat/ Sun 0600hrs - 1800hrs Overtime available IND123
Sep 01, 2025
Full time
CNC operatives, we are looking for CNC Machinists working from our manufacturing site based in Normanton, West Yorkshire. This is for a 3 day weekend shift (Friday/Sat/Sun), initial training will be on the day shift Monday to Friday (Apply online only). Training will be for approx 5 weeks. The Role: Successful candidate will undertake the CNC cutting of granite and other solid surfaces for fabrication. Duties of the Role To undertake the CNC cutting of granite and other solid surfaces to accurate dimensions for fabrication Ability to interpret dimensions from drawings, templates and formers To ensure an effective use of materials from cutting lists Ability to use CAD Cam Clean and maintain machinery and tools Maintain a tidy work area. Previous experience of worktop manufacture and use of Auto CAD would be a distinct advantage but is not essential as training will be provided. Experience of working within a fast paced and demanding manufacturing environment would be a distinct advantage. We are looking for people who are able to work to deadlines and have a flexible approach to workload and duties. Applicants should note this is physically demanding role with manual handling and heavy lifting involved. 19.56phr + Shift Allowance Working on the weekend shift Friday/Sat/ Sun 0600hrs - 1800hrs Overtime available IND123
Are you an experienced, time served CNC Machinist? Do you consider yourself to be technically skilled, safety-conscious, and an asset to a busy engineering team? Are you based in or around Corby? We have a permanent Machinist Team Member role available. This role is ideal for someone with strong machining and engineering skills and is secure, progressive, and part of an exciting investment programme. Role: Machinist Team Member Salary: 36,779.30 (including 15% shift allowance) rising to 37,586.60 upon completion of probation period Shift Patterns: 15-shift basis,Monday to Friday - rotating days, backs, and nights Responsibilities: Produce and repair one-off and small-batch components Carry out machining work on a range of machines, including but not limited to; CNC lathes/mills, specialist roll stand lathes, manual centre lathes, milling machines, boring mills, planers, slotters, grinders, drills and saws Work to precise engineering drawings and specifications Manufacture items to a high standard from existing drawings, within the expected delivery period Support the transition to a newly built Engineering Shop with modernised equipment Collection/delivery of test piece samples and stands around the site Support with Apprentice training Adhering to the works procedures and PPE instructions at all times Take an active role in continued improvement, maintaining and improving safety and housekeeping standards Undertake safe operation of equipment and machines within the Engineering Shop, including basic maintenance Working within COSHH regulations. Adhering to UK Health and Safety legislation at all times Essential requirements: A time-served apprenticeship and/or NVQ level 3 (Mechanical Engineering) Experience with manual lathes, milling machines, and general workshop tools Proven experience within a heavy industrial environment Valid UK Driving Licence and access to own vehicle (due to shifts) Understanding of safe systems of work Desirable requirements: Experience with CNC machines, including setting and programming IOSH or NEBOSH safety qualification Benefits: 35 days holidays per annum Annual Pay Review Quarterly Bonus Scheme - subject to business performance One of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Employee Assistance Programme for financial, mental and physical support Employee discount scheme including discounts with Vodafone and Jaguar Land Rover Opportunity for progression into senior positions Ability to learn, grow and develop with additional training and funded courses Does this role sound interesting? Apply today Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Sep 01, 2025
Full time
Are you an experienced, time served CNC Machinist? Do you consider yourself to be technically skilled, safety-conscious, and an asset to a busy engineering team? Are you based in or around Corby? We have a permanent Machinist Team Member role available. This role is ideal for someone with strong machining and engineering skills and is secure, progressive, and part of an exciting investment programme. Role: Machinist Team Member Salary: 36,779.30 (including 15% shift allowance) rising to 37,586.60 upon completion of probation period Shift Patterns: 15-shift basis,Monday to Friday - rotating days, backs, and nights Responsibilities: Produce and repair one-off and small-batch components Carry out machining work on a range of machines, including but not limited to; CNC lathes/mills, specialist roll stand lathes, manual centre lathes, milling machines, boring mills, planers, slotters, grinders, drills and saws Work to precise engineering drawings and specifications Manufacture items to a high standard from existing drawings, within the expected delivery period Support the transition to a newly built Engineering Shop with modernised equipment Collection/delivery of test piece samples and stands around the site Support with Apprentice training Adhering to the works procedures and PPE instructions at all times Take an active role in continued improvement, maintaining and improving safety and housekeeping standards Undertake safe operation of equipment and machines within the Engineering Shop, including basic maintenance Working within COSHH regulations. Adhering to UK Health and Safety legislation at all times Essential requirements: A time-served apprenticeship and/or NVQ level 3 (Mechanical Engineering) Experience with manual lathes, milling machines, and general workshop tools Proven experience within a heavy industrial environment Valid UK Driving Licence and access to own vehicle (due to shifts) Understanding of safe systems of work Desirable requirements: Experience with CNC machines, including setting and programming IOSH or NEBOSH safety qualification Benefits: 35 days holidays per annum Annual Pay Review Quarterly Bonus Scheme - subject to business performance One of the UK's leading defined contribution pension schemes (10% employer contribution / 6% employee contribution) Employee Assistance Programme for financial, mental and physical support Employee discount scheme including discounts with Vodafone and Jaguar Land Rover Opportunity for progression into senior positions Ability to learn, grow and develop with additional training and funded courses Does this role sound interesting? Apply today Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
A new position has been created a Production Assembly Operative/ Production Assistant. Our client in Newhaven is now looking for a person to be their Production Assistant who can add strong support to the assembly workers. The successful Production Assistant must ensure that all the assemblers have all the required Stocks/Kit/Components and small Tools to complete their work. You will also be required to be part of the assemblers on the line when required. Computer skills is required in this role, as all Stock issued has to be monitored correctly. If you would like to earn in excess of £482 per week + accrued holiday pay then this could be the opportunity you ve been looking for. This is based on the following: Hourly pay of £12.21 ( Start rate) over 39.5 hours per week. The working week is 8am to 5pm- Monday to Thursday (Fridays finish at 1.30pm) 30 mins unpaid lunch, and two paid 15 min breaks each day. Pay is Weekly, and paid each Friday. This can be a Temp to Perm position for the right person. Additionally, do you have some experience in manually assembling products. Perhaps you have been a machine operator or machine minder, perhaps worked with wood, or a machinist with other products/materials (even Sewing machines) Can you work with accuracy and with great attention to detail, have a keen eye, along with manual dexterity. Do you have good computer skills ? Able to track stock on internal system, accurate data entry is really really important. Packaging with care is very important too, to ensure zero damage to fragile products. Some lifting is involved, so safety shoes need to be worn at all times. Candidates will need to be motivated, enthusiastic, and reliable throughout the busy period. Being a flexible person is a big requirement due to being moved around the different departments, assisting others and learning all aspects of the production. Assistance in other areas on the production floor would be required. Equally important is your reliability and for you to enjoy your working role. Be a team player. Please note that this is a very hands on position and the client intends to offer the most successful candidate a permanent contract after a short period of time. Please be advised that this is a standing up position during the hours of work. The working environment is clean, tidy and professional and is further enhanced by the full use of the company s kitchen during breaks. Microwave food can be prepared, and free tea/coffee is made available. The canteen is available to you during your breaks allowing you to catch up on any phone messages. (Phone use is not permitted during core working hours) In the 1st instance, please apply with an up-to-date CV. Thank you
Sep 01, 2025
Full time
A new position has been created a Production Assembly Operative/ Production Assistant. Our client in Newhaven is now looking for a person to be their Production Assistant who can add strong support to the assembly workers. The successful Production Assistant must ensure that all the assemblers have all the required Stocks/Kit/Components and small Tools to complete their work. You will also be required to be part of the assemblers on the line when required. Computer skills is required in this role, as all Stock issued has to be monitored correctly. If you would like to earn in excess of £482 per week + accrued holiday pay then this could be the opportunity you ve been looking for. This is based on the following: Hourly pay of £12.21 ( Start rate) over 39.5 hours per week. The working week is 8am to 5pm- Monday to Thursday (Fridays finish at 1.30pm) 30 mins unpaid lunch, and two paid 15 min breaks each day. Pay is Weekly, and paid each Friday. This can be a Temp to Perm position for the right person. Additionally, do you have some experience in manually assembling products. Perhaps you have been a machine operator or machine minder, perhaps worked with wood, or a machinist with other products/materials (even Sewing machines) Can you work with accuracy and with great attention to detail, have a keen eye, along with manual dexterity. Do you have good computer skills ? Able to track stock on internal system, accurate data entry is really really important. Packaging with care is very important too, to ensure zero damage to fragile products. Some lifting is involved, so safety shoes need to be worn at all times. Candidates will need to be motivated, enthusiastic, and reliable throughout the busy period. Being a flexible person is a big requirement due to being moved around the different departments, assisting others and learning all aspects of the production. Assistance in other areas on the production floor would be required. Equally important is your reliability and for you to enjoy your working role. Be a team player. Please note that this is a very hands on position and the client intends to offer the most successful candidate a permanent contract after a short period of time. Please be advised that this is a standing up position during the hours of work. The working environment is clean, tidy and professional and is further enhanced by the full use of the company s kitchen during breaks. Microwave food can be prepared, and free tea/coffee is made available. The canteen is available to you during your breaks allowing you to catch up on any phone messages. (Phone use is not permitted during core working hours) In the 1st instance, please apply with an up-to-date CV. Thank you
General Engineering Labourer Location : Mexborough, South Yorkshire Pay rate : 12.21 Join our team and build a rewarding career in engineering. Our client is seeking a dependable and adaptable General Engineering Labourer to join our dynamic production team. This is a hands-on role offering full training and career development in a supportive, team-driven environment. Key Responsibilities Engineering Support: Assist machinists, welders, and engineers with fabrication and assembly tasks Operate basic workshop machinery and tools (e.g., chop saws, grinders, drills) Work within our paint spraying booth to assist with finishing tasks General Labour: Safely handle and store materials around the site Perform general housekeeping and light gardening duties Use the company pool car for collecting and delivering parts, tools, or materials Health & Safety: Follow all site safety protocols and wear appropriate PPE Assist with maintaining tools and equipment in good working condition Requirements Experience: Some prior labouring or production experience is essential; experience in an engineering or manufacturing setting is a plus Skills: Basic mechanical aptitude and a willingness to learn FLT Counterbalance Strong organisational and multitasking ability A proactive attitude with the ability to work independently or as part of a team Other: Full UK driving licence (essential) Physically fit and comfortable with manual labour Flexible and adaptable to changing tasks and priorities Desirable (Training Provided if Needed) Experience with forklift and/or crane operation Familiarity with basic hand tools, power tools, and gardening tools What We Offer Full training provided (including forklift and crane certification) Opportunities for internal progression and career development A friendly and collaborative working environment The chance to work on innovative projects supporting the steel industry Apply today and be part of an established company where your work truly makes a difference. If you're motivated, reliable, and ready to take the next step in your engineering career, please get in touch. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies Privacy Notice.
Sep 01, 2025
Seasonal
General Engineering Labourer Location : Mexborough, South Yorkshire Pay rate : 12.21 Join our team and build a rewarding career in engineering. Our client is seeking a dependable and adaptable General Engineering Labourer to join our dynamic production team. This is a hands-on role offering full training and career development in a supportive, team-driven environment. Key Responsibilities Engineering Support: Assist machinists, welders, and engineers with fabrication and assembly tasks Operate basic workshop machinery and tools (e.g., chop saws, grinders, drills) Work within our paint spraying booth to assist with finishing tasks General Labour: Safely handle and store materials around the site Perform general housekeeping and light gardening duties Use the company pool car for collecting and delivering parts, tools, or materials Health & Safety: Follow all site safety protocols and wear appropriate PPE Assist with maintaining tools and equipment in good working condition Requirements Experience: Some prior labouring or production experience is essential; experience in an engineering or manufacturing setting is a plus Skills: Basic mechanical aptitude and a willingness to learn FLT Counterbalance Strong organisational and multitasking ability A proactive attitude with the ability to work independently or as part of a team Other: Full UK driving licence (essential) Physically fit and comfortable with manual labour Flexible and adaptable to changing tasks and priorities Desirable (Training Provided if Needed) Experience with forklift and/or crane operation Familiarity with basic hand tools, power tools, and gardening tools What We Offer Full training provided (including forklift and crane certification) Opportunities for internal progression and career development A friendly and collaborative working environment The chance to work on innovative projects supporting the steel industry Apply today and be part of an established company where your work truly makes a difference. If you're motivated, reliable, and ready to take the next step in your engineering career, please get in touch. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies Privacy Notice.
Job Title: Manual Machinist - (Multi-spindle Lathes) Location : Barnstaple Two shifts available: Mon - Fri: 06:00 - 14:00 Mon - Thurs: 14:00 - 0:00 Salary: Up to 35,000, plus 25% shift allowance + 5% Bonus. About us: This business is an international leader in the aerospace, defence, and energy markets, employing more than 60,000 people at over 40 manufacturing facilities and regional offices worldwide. Working closely with their customers, this business delivers technologically differentiated systems and products for the most demanding environments, with high certification requirements for applications across its core end markets. Through focusing on engineering and operational excellence, this business builds broad installed bases of equipment and provides services and support across a fleet of approximately 73,000 aircraft. Business Core values: Winning culture, valued customers, passionate people, and engaged leadership are what have allowed them to become the company they are today. The Role: Have you operated Wickman multi-spindle lathes (or similar) in a high-paced manufacturing environment? Are you passionate about high-quality machining and ready to take your skills to the next level? We are seeking a highly skilled and motivated Multi-Spindle Lathe Setter/Operator to join our precision manufacturing team. This role focuses on the setup, adjustment, and operation of Wickman multi-spindle lathes. You will be instrumental in ensuring efficient machine operation, reducing downtime, and maintaining high-quality output within a lean manufacturing environment. Responsibilities of the role: Perform rapid changeovers using SMED techniques to maximize machine uptime. Troubleshoot mechanical and tooling issues related to cam-driven mechanisms and multi-spindle synchronization. Collaborate with maintenance, quality, and production teams to maintain machine reliability and product quality. Contribute actively to LEAN initiatives, including 5S, Kaizen, and TPM, to improve process efficiency and reduce waste. Maintain accurate setup records and assist in training other operators. Skills required: Strong mechanical aptitude, particularly with cam systems and manual machining. Experience with Wickman machines is ideal, but not essential. We're open to candidates with experience on similar multi-spindle, cam-driven machines. Ability to set, operate, and reset machines with minimal guidance. Understanding of cams, levers, and mechanical functions - this is a hands-on, old-technology role, not CNC-based.
Sep 01, 2025
Full time
Job Title: Manual Machinist - (Multi-spindle Lathes) Location : Barnstaple Two shifts available: Mon - Fri: 06:00 - 14:00 Mon - Thurs: 14:00 - 0:00 Salary: Up to 35,000, plus 25% shift allowance + 5% Bonus. About us: This business is an international leader in the aerospace, defence, and energy markets, employing more than 60,000 people at over 40 manufacturing facilities and regional offices worldwide. Working closely with their customers, this business delivers technologically differentiated systems and products for the most demanding environments, with high certification requirements for applications across its core end markets. Through focusing on engineering and operational excellence, this business builds broad installed bases of equipment and provides services and support across a fleet of approximately 73,000 aircraft. Business Core values: Winning culture, valued customers, passionate people, and engaged leadership are what have allowed them to become the company they are today. The Role: Have you operated Wickman multi-spindle lathes (or similar) in a high-paced manufacturing environment? Are you passionate about high-quality machining and ready to take your skills to the next level? We are seeking a highly skilled and motivated Multi-Spindle Lathe Setter/Operator to join our precision manufacturing team. This role focuses on the setup, adjustment, and operation of Wickman multi-spindle lathes. You will be instrumental in ensuring efficient machine operation, reducing downtime, and maintaining high-quality output within a lean manufacturing environment. Responsibilities of the role: Perform rapid changeovers using SMED techniques to maximize machine uptime. Troubleshoot mechanical and tooling issues related to cam-driven mechanisms and multi-spindle synchronization. Collaborate with maintenance, quality, and production teams to maintain machine reliability and product quality. Contribute actively to LEAN initiatives, including 5S, Kaizen, and TPM, to improve process efficiency and reduce waste. Maintain accurate setup records and assist in training other operators. Skills required: Strong mechanical aptitude, particularly with cam systems and manual machining. Experience with Wickman machines is ideal, but not essential. We're open to candidates with experience on similar multi-spindle, cam-driven machines. Ability to set, operate, and reset machines with minimal guidance. Understanding of cams, levers, and mechanical functions - this is a hands-on, old-technology role, not CNC-based.
The Role We are seeking a skilled Machinist to operate and maintain CNC and manual machines to produce high-precision parts and components. As a key member of our production team, you will be responsible for ensuring the accuracy and quality of parts, troubleshooting machinery issues, and maintaining a safe and efficient work environment click apply for full job details
Aug 31, 2025
Full time
The Role We are seeking a skilled Machinist to operate and maintain CNC and manual machines to produce high-precision parts and components. As a key member of our production team, you will be responsible for ensuring the accuracy and quality of parts, troubleshooting machinery issues, and maintaining a safe and efficient work environment click apply for full job details
