Workshop HGV Technician Vehicle Management Unit - 4 on 4 off Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU
Sep 04, 2025
Full time
Workshop HGV Technician Vehicle Management Unit - 4 on 4 off Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU
HGV Technician Location: Goole Employment Type: Full-Time, Permanent Working Hours: Monday to Friday, with overtime opportunities available Salary: £38,000 - £40,000 per annum Why Join Us? At TIP, we're proud to be a Great Place to Work Certified company and a true market leader in providing transportation and logistics solutions across Europe. We offer one of the most attractive benefits packages in the industry, and here's what sets us apart: Unbeatable Holiday Package: Enjoy 25 days of annual leave plus 8 bank holidays, giving you 33 days off. Want even more time to relax or plan adventures? You can buy up to 4 additional days, totalling an incredible 37 days of holiday per year! Outstanding Earning Potential: Boost your income with overtime paid at time and a half, and double pay on Sundays. Your skills and dedication deserve generous rewards! £500 Welcome Bonus: We value your expertise and commitment, so you'll receive a £500 joining bonus as a warm welcome to the team. £1,000 Referral Scheme: Know a top-notch technician who'd thrive here? Refer them and earn £1,000! Private Healthcare for You & Your Loved Ones: We invest in your health and well-being. Our private healthcare plan, a rare benefit in the industry, can be extended to cover your immediate family. We look after you and the ones you care about most. Pension & Financial Security: We provide a solid company pension, life assurance at 3x your salary, and Group Income Protection (GIP) for long-term peace of mind. Seasonal Rewards & Recognition: Celebrate the festive season with high street Christmas vouchers because we appreciate all you do. What You'll Be Doing: Perform detailed inspections, servicing, and repairs on trailers, maintaining the highest standards of safety and functionality. Accurately and efficiently complete all compliance documentation. Diagnose and resolve issues using EBS systems such as HALDEX, WABCO, and KNORR BREMSE. Participate in ongoing product and industry training, including IRTEC, tail lift, BPW & SAF axle/brake training to continuously develop your expertise. Deliver exceptional customer service while meeting tight deadlines. Follow all health and safety guidelines to maintain a safe and secure work environment. Consistently uphold and demonstrate TIP values and behaviours. Whilst the above outlines the main duties of the post the list is not exhaustive, and duties may need to change in the light of future developments or from time to time as directed by your supervisor or manager Who We're Looking For: We are seeking passionate and skilled candidates who thrive in a fast-paced, hands-on environment. Here's what we're looking for: Essential: Semi-Trailer or Heavy Vehicle experience. Industry standard qualifications such as City & Guilds or NVQs. Desirable: HGV Class 1 driving licence. IRTEC accreditation. EBS diagnostics experience, including Knorr Bremse, Haldex, and WABCO systems. Welding certification. Training or experience with axle manufacturers such as BPW, SAF, or JOST. Tail lift training and experience. Double deck or lifting deck maintenance experience. Take the next step in your career and become part of our exceptional team, where your hard work is rewarded, and your well-being is prioritized. Experience firsthand why TIP is a market leader and why we're Great Place to Work Certified ! Apply today! We've Successfully Hired from These Backgrounds: HGV Technicians, Plant Technicians, Army Engineers, Mechanical Fitters, Heavy Vehicle Mechanics, Maintenance Engineers, Heavy Equipment Fitters, Diesel Mechanics, Plant Maintenance Technicians, Plant Engineers, and Equipment Repair Technicians. We believe diversity drives innovation. The variety of nationalities, cultures, religions and ethnic backgrounds enrich our workforce by bringing together new ideas, innovations and thinking styles that lead to business success. Integrity, honesty and ethical behavior are at the core of our business. When we have a vacancy, we welcome everyone who has the potential, skills, commitment and honest way of working into our TIP family. Benefits: Additional leave Company pension Employee discount Health & wellbeing programme Life insurance On-site parking Private medical insurance Referral programme
Sep 04, 2025
Full time
HGV Technician Location: Goole Employment Type: Full-Time, Permanent Working Hours: Monday to Friday, with overtime opportunities available Salary: £38,000 - £40,000 per annum Why Join Us? At TIP, we're proud to be a Great Place to Work Certified company and a true market leader in providing transportation and logistics solutions across Europe. We offer one of the most attractive benefits packages in the industry, and here's what sets us apart: Unbeatable Holiday Package: Enjoy 25 days of annual leave plus 8 bank holidays, giving you 33 days off. Want even more time to relax or plan adventures? You can buy up to 4 additional days, totalling an incredible 37 days of holiday per year! Outstanding Earning Potential: Boost your income with overtime paid at time and a half, and double pay on Sundays. Your skills and dedication deserve generous rewards! £500 Welcome Bonus: We value your expertise and commitment, so you'll receive a £500 joining bonus as a warm welcome to the team. £1,000 Referral Scheme: Know a top-notch technician who'd thrive here? Refer them and earn £1,000! Private Healthcare for You & Your Loved Ones: We invest in your health and well-being. Our private healthcare plan, a rare benefit in the industry, can be extended to cover your immediate family. We look after you and the ones you care about most. Pension & Financial Security: We provide a solid company pension, life assurance at 3x your salary, and Group Income Protection (GIP) for long-term peace of mind. Seasonal Rewards & Recognition: Celebrate the festive season with high street Christmas vouchers because we appreciate all you do. What You'll Be Doing: Perform detailed inspections, servicing, and repairs on trailers, maintaining the highest standards of safety and functionality. Accurately and efficiently complete all compliance documentation. Diagnose and resolve issues using EBS systems such as HALDEX, WABCO, and KNORR BREMSE. Participate in ongoing product and industry training, including IRTEC, tail lift, BPW & SAF axle/brake training to continuously develop your expertise. Deliver exceptional customer service while meeting tight deadlines. Follow all health and safety guidelines to maintain a safe and secure work environment. Consistently uphold and demonstrate TIP values and behaviours. Whilst the above outlines the main duties of the post the list is not exhaustive, and duties may need to change in the light of future developments or from time to time as directed by your supervisor or manager Who We're Looking For: We are seeking passionate and skilled candidates who thrive in a fast-paced, hands-on environment. Here's what we're looking for: Essential: Semi-Trailer or Heavy Vehicle experience. Industry standard qualifications such as City & Guilds or NVQs. Desirable: HGV Class 1 driving licence. IRTEC accreditation. EBS diagnostics experience, including Knorr Bremse, Haldex, and WABCO systems. Welding certification. Training or experience with axle manufacturers such as BPW, SAF, or JOST. Tail lift training and experience. Double deck or lifting deck maintenance experience. Take the next step in your career and become part of our exceptional team, where your hard work is rewarded, and your well-being is prioritized. Experience firsthand why TIP is a market leader and why we're Great Place to Work Certified ! Apply today! We've Successfully Hired from These Backgrounds: HGV Technicians, Plant Technicians, Army Engineers, Mechanical Fitters, Heavy Vehicle Mechanics, Maintenance Engineers, Heavy Equipment Fitters, Diesel Mechanics, Plant Maintenance Technicians, Plant Engineers, and Equipment Repair Technicians. We believe diversity drives innovation. The variety of nationalities, cultures, religions and ethnic backgrounds enrich our workforce by bringing together new ideas, innovations and thinking styles that lead to business success. Integrity, honesty and ethical behavior are at the core of our business. When we have a vacancy, we welcome everyone who has the potential, skills, commitment and honest way of working into our TIP family. Benefits: Additional leave Company pension Employee discount Health & wellbeing programme Life insurance On-site parking Private medical insurance Referral programme
HGV Trailer Technician Location: Cardiff Employment Type: Full-Time, Permanent Working Hours: Monday to Friday, with overtime opportunities available Salary: up to £37,000 per annum Why Join Us? At TIP, we're proud to be a Great Place to Work Certified company and a true market leader in providing transportation and logistics solutions across Europe. We offer one of the most attractive benefits packages in the industry, and here's what sets us apart: Unbeatable Holiday Package: Enjoy 25 days of annual leave plus 8 bank holidays, giving you 33 days off. Want even more time to relax or plan adventures? You can buy up to 4 additional days, totalling an incredible 37 days of holiday per year! Outstanding Earning Potential: Boost your income with overtime paid at time and a half, and double pay on Sundays. Your skills and dedication deserve generous rewards! £500 Welcome Bonus: We value your expertise and commitment, so you'll receive a £500 joining bonus as a warm welcome to the team. £1,000 Referral Scheme: Know a top-notch technician who'd thrive here? Refer them and earn £1,000! Private Healthcare for You & Your Loved Ones: We invest in your health and well-being. Our private healthcare plan, a rare benefit in the industry, can be extended to cover your immediate family. We look after you and the ones you care about most. Pension & Financial Security: We provide a solid company pension, life assurance at 3x your salary, and Group Income Protection (GIP) for long-term peace of mind. Seasonal Rewards & Recognition: Celebrate the festive season with high street Christmas vouchers because we appreciate all you do. What You'll Be Doing: Perform detailed inspections, servicing, and repairs on trailers, maintaining the highest standards of safety and functionality. Accurately and efficiently complete all compliance documentation. Diagnose and resolve issues using EBS systems such as HALDEX, WABCO, and KNORR BREMSE. Participate in ongoing product and industry training, including IRTEC, tail lift, BPW & SAF axle/brake training to continuously develop your expertise. Deliver exceptional customer service while meeting tight deadlines. Follow all health and safety guidelines to maintain a safe and secure work environment. Consistently uphold and demonstrate TIP values and behaviours. Whilst the above outlines the main duties of the post the list is not exhaustive, and duties may need to change in the light of future developments or from time to time as directed by your supervisor or manager Who We're Looking For: We are seeking passionate and skilled candidates who thrive in a fast-paced, hands-on environment. Here's what we're looking for: Essential: Semi-Trailer or Heavy Vehicle experience. Industry standard qualifications such as City & Guilds or NVQs. Desirable: HGV Class 1 driving licence. IRTEC accreditation. EBS diagnostics experience, including Knorr Bremse, Haldex, and WABCO systems. Welding certification. Training or experience with axle manufacturers such as BPW, SAF, or JOST. Tail lift training and experience. Double deck or lifting deck maintenance experience. Take the next step in your career and become part of our exceptional team, where your hard work is rewarded, and your well-being is prioritized. Experience firsthand why TIP is a market leader and why we're Great Place to Work Certified ! Apply today! We've Successfully Hired from These Backgrounds: HGV Technicians, Plant Technicians, Army Engineers, Mechanical Fitters, Heavy Vehicle Mechanics, Maintenance Engineers, Heavy Equipment Fitters, Diesel Mechanics, Plant Maintenance Technicians, Plant Engineers, and Equipment Repair Technicians. We believe diversity drives innovation. The variety of nationalities, cultures, religions and ethnic backgrounds enrich our workforce by bringing together new ideas, innovations and thinking styles that lead to business success. Integrity, honesty and ethical behavior are at the core of our business. When we have a vacancy, we welcome everyone who has the potential, skills, commitment and honest way of working into our TIP family.
Sep 04, 2025
Full time
HGV Trailer Technician Location: Cardiff Employment Type: Full-Time, Permanent Working Hours: Monday to Friday, with overtime opportunities available Salary: up to £37,000 per annum Why Join Us? At TIP, we're proud to be a Great Place to Work Certified company and a true market leader in providing transportation and logistics solutions across Europe. We offer one of the most attractive benefits packages in the industry, and here's what sets us apart: Unbeatable Holiday Package: Enjoy 25 days of annual leave plus 8 bank holidays, giving you 33 days off. Want even more time to relax or plan adventures? You can buy up to 4 additional days, totalling an incredible 37 days of holiday per year! Outstanding Earning Potential: Boost your income with overtime paid at time and a half, and double pay on Sundays. Your skills and dedication deserve generous rewards! £500 Welcome Bonus: We value your expertise and commitment, so you'll receive a £500 joining bonus as a warm welcome to the team. £1,000 Referral Scheme: Know a top-notch technician who'd thrive here? Refer them and earn £1,000! Private Healthcare for You & Your Loved Ones: We invest in your health and well-being. Our private healthcare plan, a rare benefit in the industry, can be extended to cover your immediate family. We look after you and the ones you care about most. Pension & Financial Security: We provide a solid company pension, life assurance at 3x your salary, and Group Income Protection (GIP) for long-term peace of mind. Seasonal Rewards & Recognition: Celebrate the festive season with high street Christmas vouchers because we appreciate all you do. What You'll Be Doing: Perform detailed inspections, servicing, and repairs on trailers, maintaining the highest standards of safety and functionality. Accurately and efficiently complete all compliance documentation. Diagnose and resolve issues using EBS systems such as HALDEX, WABCO, and KNORR BREMSE. Participate in ongoing product and industry training, including IRTEC, tail lift, BPW & SAF axle/brake training to continuously develop your expertise. Deliver exceptional customer service while meeting tight deadlines. Follow all health and safety guidelines to maintain a safe and secure work environment. Consistently uphold and demonstrate TIP values and behaviours. Whilst the above outlines the main duties of the post the list is not exhaustive, and duties may need to change in the light of future developments or from time to time as directed by your supervisor or manager Who We're Looking For: We are seeking passionate and skilled candidates who thrive in a fast-paced, hands-on environment. Here's what we're looking for: Essential: Semi-Trailer or Heavy Vehicle experience. Industry standard qualifications such as City & Guilds or NVQs. Desirable: HGV Class 1 driving licence. IRTEC accreditation. EBS diagnostics experience, including Knorr Bremse, Haldex, and WABCO systems. Welding certification. Training or experience with axle manufacturers such as BPW, SAF, or JOST. Tail lift training and experience. Double deck or lifting deck maintenance experience. Take the next step in your career and become part of our exceptional team, where your hard work is rewarded, and your well-being is prioritized. Experience firsthand why TIP is a market leader and why we're Great Place to Work Certified ! Apply today! We've Successfully Hired from These Backgrounds: HGV Technicians, Plant Technicians, Army Engineers, Mechanical Fitters, Heavy Vehicle Mechanics, Maintenance Engineers, Heavy Equipment Fitters, Diesel Mechanics, Plant Maintenance Technicians, Plant Engineers, and Equipment Repair Technicians. We believe diversity drives innovation. The variety of nationalities, cultures, religions and ethnic backgrounds enrich our workforce by bringing together new ideas, innovations and thinking styles that lead to business success. Integrity, honesty and ethical behavior are at the core of our business. When we have a vacancy, we welcome everyone who has the potential, skills, commitment and honest way of working into our TIP family.
Gold Star Metal Traders is looking for an Experienced HGV Fitter Key Responsibilities: Perform routine maintenance and repairs on HGVs, trucks, trailers, plant and vans. Maintain accurate records of all maintenance and repair activities. Collaborate with other team members to prioritize and complete tasks efficiently. Adhere to safety protocols and guidelines at all times. Skills & Experience Needed: Minimum of NVQ/City & Guilds Level 2 Minimum 2 years' experience as HGV Fitter Knowledge of HGV systems, engine's, transmission's & mechanical components Strong problem-solving skill's with the ability to interpret technical documents and schematics Excellent attention to detail, and a commitment to producing high-quality work A valid manual driving licence is essential; HGV licence is an advantage but not mandatory Flexibility to undertake a wide range of tasks and work within guidelines and to set deadlines Excellent communication and team working skills Own toolbox and tools Commitment to workplace safety and compliance with regulations. This position is predominantly van based/mobile Salary: £49,000 - £52,000 + vehicle Bonus after successfully passing probation period Working hours: 07:00-17:00 Monday to Friday Based at March depot but will need to be able to travel to other sites, Kings Lynn & Sutton Bridge Job Types: Full-time, Permanent Pay: £49,000.00-£52,000.00 per year Benefits: Company pension Free parking On-site parking Experience: as HGV Fitter: 2 years (preferred) Licence/Certification: HGV Licence (preferred) Work Location: In person Reference ID: HGV1
Sep 04, 2025
Full time
Gold Star Metal Traders is looking for an Experienced HGV Fitter Key Responsibilities: Perform routine maintenance and repairs on HGVs, trucks, trailers, plant and vans. Maintain accurate records of all maintenance and repair activities. Collaborate with other team members to prioritize and complete tasks efficiently. Adhere to safety protocols and guidelines at all times. Skills & Experience Needed: Minimum of NVQ/City & Guilds Level 2 Minimum 2 years' experience as HGV Fitter Knowledge of HGV systems, engine's, transmission's & mechanical components Strong problem-solving skill's with the ability to interpret technical documents and schematics Excellent attention to detail, and a commitment to producing high-quality work A valid manual driving licence is essential; HGV licence is an advantage but not mandatory Flexibility to undertake a wide range of tasks and work within guidelines and to set deadlines Excellent communication and team working skills Own toolbox and tools Commitment to workplace safety and compliance with regulations. This position is predominantly van based/mobile Salary: £49,000 - £52,000 + vehicle Bonus after successfully passing probation period Working hours: 07:00-17:00 Monday to Friday Based at March depot but will need to be able to travel to other sites, Kings Lynn & Sutton Bridge Job Types: Full-time, Permanent Pay: £49,000.00-£52,000.00 per year Benefits: Company pension Free parking On-site parking Experience: as HGV Fitter: 2 years (preferred) Licence/Certification: HGV Licence (preferred) Work Location: In person Reference ID: HGV1
Mobile Trailer Technician Location: Knottingley Employment Type: Full-Time, Permanent Working Hours: Monday to Friday Salary: up to £38,000 per annum DOE (Work Van & Mobile Included) Why Join Us? At TIP, we're proud to be a Great Place to Work Certified company and a true market leader in providing transportation and logistics solutions across Europe. We offer one of the most attractive benefits packages in the industry, and here's what sets us apart: Unbeatable Holiday Package: Enjoy 25 days of annual leave plus 8 bank holidays, giving you 33 days off. Want even more time to relax or plan adventures? You can buy up to 4 additional days, totalling an incredible 37 days of holiday per year! £1000 Welcome Bonus: We value your expertise and commitment, so you'll receive a £500 joining bonus as a warm welcome to the team. £1,000 Referral Scheme: Know a top-notch technician who'd thrive here? Refer them and earn £1,000! Private Healthcare for You & Your Loved Ones: We invest in your health and well-being. Our private healthcare plan, a rare benefit in the industry, can be extended to cover your immediate family. We look after you and the ones you care about most. Pension & Financial Security: We provide a solid company pension, life assurance at 3x your salary, and Group Income Protection (GIP) for long-term peace of mind. Seasonal Rewards & Recognition: Celebrate the festive season with high street Christmas vouchers because we appreciate all you do. What You'll Be Doing: Perform detailed inspections, servicing, and repairs on trailers, maintaining the highest standards of safety and functionality. Accurately and efficiently complete all compliance documentation. Diagnose and resolve issues using EBS systems such as HALDEX, WABCO, and KNORR BREMSE. Participate in ongoing product and industry training, including IRTEC, tail lift, BPW & SAF axle/brake training to continuously develop your expertise. Deliver exceptional customer service while meeting tight deadlines. Follow all health and safety guidelines to maintain a safe and secure work environment. Consistently uphold and demonstrate TIP values and behaviours. Whilst the above outlines the main duties of the post the list is not exhaustive, and duties may need to change in the light of future developments or from time to time as directed by your supervisor or manager Who We're Looking For: We are seeking passionate and skilled candidates who thrive in a fast-paced, hands-on environment. Here's what we're looking for: Essential: Semi-Trailer or Heavy Vehicle experience. Industry standard qualifications such as City & Guilds or NVQs. Desirable: HGV Class 1 driving licence. IRTEC accreditation. EBS diagnostics experience, including Knorr Bremse, Haldex, and WABCO systems. Welding certification. Training or experience with axle manufacturers such as BPW, SAF, or JOST. Tail lift training and experience. Double deck or lifting deck maintenance experience. Take the next step in your career and become part of our exceptional team, where your hard work is rewarded, and your well-being is prioritized. Experience firsthand why TIP is a market leader and why we're Great Place to Work Certified! Apply today! We've Successfully Hired from These Backgrounds: HGV Technicians, Plant Technicians, Army Engineers, Mechanical Fitters, Heavy Vehicle Mechanics, Maintenance Engineers, Heavy Equipment Fitters, Diesel Mechanics, Plant Maintenance Technicians, Plant Engineers, and Equipment Repair Technicians. We believe diversity drives innovation. The variety of nationalities, cultures, religions and ethnic backgrounds enrich our workforce by bringing together new ideas, innovations and thinking styles that lead to business success. Integrity, honesty and ethical behavior are at the core of our business. When we have a vacancy, we welcome everyone who has the potential, skills, commitment and honest way of working into our TIP family.
Sep 04, 2025
Full time
Mobile Trailer Technician Location: Knottingley Employment Type: Full-Time, Permanent Working Hours: Monday to Friday Salary: up to £38,000 per annum DOE (Work Van & Mobile Included) Why Join Us? At TIP, we're proud to be a Great Place to Work Certified company and a true market leader in providing transportation and logistics solutions across Europe. We offer one of the most attractive benefits packages in the industry, and here's what sets us apart: Unbeatable Holiday Package: Enjoy 25 days of annual leave plus 8 bank holidays, giving you 33 days off. Want even more time to relax or plan adventures? You can buy up to 4 additional days, totalling an incredible 37 days of holiday per year! £1000 Welcome Bonus: We value your expertise and commitment, so you'll receive a £500 joining bonus as a warm welcome to the team. £1,000 Referral Scheme: Know a top-notch technician who'd thrive here? Refer them and earn £1,000! Private Healthcare for You & Your Loved Ones: We invest in your health and well-being. Our private healthcare plan, a rare benefit in the industry, can be extended to cover your immediate family. We look after you and the ones you care about most. Pension & Financial Security: We provide a solid company pension, life assurance at 3x your salary, and Group Income Protection (GIP) for long-term peace of mind. Seasonal Rewards & Recognition: Celebrate the festive season with high street Christmas vouchers because we appreciate all you do. What You'll Be Doing: Perform detailed inspections, servicing, and repairs on trailers, maintaining the highest standards of safety and functionality. Accurately and efficiently complete all compliance documentation. Diagnose and resolve issues using EBS systems such as HALDEX, WABCO, and KNORR BREMSE. Participate in ongoing product and industry training, including IRTEC, tail lift, BPW & SAF axle/brake training to continuously develop your expertise. Deliver exceptional customer service while meeting tight deadlines. Follow all health and safety guidelines to maintain a safe and secure work environment. Consistently uphold and demonstrate TIP values and behaviours. Whilst the above outlines the main duties of the post the list is not exhaustive, and duties may need to change in the light of future developments or from time to time as directed by your supervisor or manager Who We're Looking For: We are seeking passionate and skilled candidates who thrive in a fast-paced, hands-on environment. Here's what we're looking for: Essential: Semi-Trailer or Heavy Vehicle experience. Industry standard qualifications such as City & Guilds or NVQs. Desirable: HGV Class 1 driving licence. IRTEC accreditation. EBS diagnostics experience, including Knorr Bremse, Haldex, and WABCO systems. Welding certification. Training or experience with axle manufacturers such as BPW, SAF, or JOST. Tail lift training and experience. Double deck or lifting deck maintenance experience. Take the next step in your career and become part of our exceptional team, where your hard work is rewarded, and your well-being is prioritized. Experience firsthand why TIP is a market leader and why we're Great Place to Work Certified! Apply today! We've Successfully Hired from These Backgrounds: HGV Technicians, Plant Technicians, Army Engineers, Mechanical Fitters, Heavy Vehicle Mechanics, Maintenance Engineers, Heavy Equipment Fitters, Diesel Mechanics, Plant Maintenance Technicians, Plant Engineers, and Equipment Repair Technicians. We believe diversity drives innovation. The variety of nationalities, cultures, religions and ethnic backgrounds enrich our workforce by bringing together new ideas, innovations and thinking styles that lead to business success. Integrity, honesty and ethical behavior are at the core of our business. When we have a vacancy, we welcome everyone who has the potential, skills, commitment and honest way of working into our TIP family.
Mechanical Fitter Dover - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering East Sussex. This role is a mobile hands on position working in the field of Mechanical Engineering. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
Sep 04, 2025
Full time
Mechanical Fitter Dover - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering East Sussex. This role is a mobile hands on position working in the field of Mechanical Engineering. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
Mechanical Fitter Southampton - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering Hampshire and surrounding area. This role is a mobile hands on position working on Water Treatment sites. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
Sep 04, 2025
Full time
Mechanical Fitter Southampton - c£40k - £45k+ - door to door - O/T The position is full time (40 hours per week minimum), and includes plenty of overtime opportunities, door to door travel and a call out rota system (1:6). There are 25 days annual leave, plus the statutory bank holidays included (33 in total) with an immediate enrolment within the company pension scheme This company is a mechanical and electrical sitework and workshop repair and service provider who operate in all the major M&E industries, Water, Power, Oil & Gas, Food and Paper, and offer a full Project Management Service including Principal Contractor and Principle Designer (under CDM 2015) status. Due to continued growth, they are looking to appoint a Mechanical Fitter, covering Hampshire and surrounding area. This role is a mobile hands on position working on Water Treatment sites. The successful candidate will be required to: Dismantle all types of mechanical equipment, such as (but not limited to) pumps, motors, gearboxes, screens etc Inspect the dismantled components, including taking tolerance measurements, shaft run outs, and assessing/understanding the recommended repair method Fault finding on equipment such as pumps, gearboxes etc specialist equipment is provided by the company Under the guidance and instruction of the Operations Manager, carry out the repair/refurbishment of the mechanical equipment Work on Water Utility, Power Industry, Food, Paper, Petroleum and Government sites as part of a mechanical & electrical team Onsite removal and installation of mechanical equipment including working at height, within confined spaces, in sewerage and potable water environments etc Candidate Ideally a minimum of 5 years experience in a similar role, preferably with a Mechanical Engineering Apprenticeship (Water Utilities and/or Power Industry experience is advantageous) Full UK driving licence Experience of, or a good understanding of, onsite health and safety rules and regulations Confined space trained or a good understanding of confined spaces training can be provided Watery Hygiene trained or a good understanding of sewerage/clean water hygiene training can be provided The ability to work alone but also be an excellent communicator when working within a team Good organisational skills with a strong ability to multi-task This role is an exciting opportunity to join a growing company, with a solid customer base, and a vision for the future which includes promotion and new roles/responsibilities.
81253 - Craft Attendant Jointer This Craft Attendant Jointer will report to the field staff supervisor and will work within network operations based in our Covent Garden office. You will be a permanent employee in our UK Power Networks team. You will attract a salary of 38,434 + benefits and a bonus of 3%. If you are successful, you will need to undertake a medical and DBS reference check Close Date: .15/09/2025 We also provide the following additional benefits 25 Days Annual Leave plus bank holidays. Reservist Leave - Additional 18 days full pay and 22 unpaid Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit Scheme, Season Ticket Loan Tax efficient benefits: Cycle to Work, Home & Tech, and Green Car Leasing Schemes Occupational Health support Switched On - scheme providing discount on hundreds of retailers' products Discounted gym membership Employee Assistance Programme Job Purpose To work as part of a team to deliver the enhanced fault response performance within the London area. This includes liaison with customers, network operations and control management of contractors. This will involve working with the full-time dedicated customer champions within the team. The post holder is required to assist the craftsperson in their role in terms of network maintenance, reinforcement, alterations and fault repairs on the LV/HV distribution network involving switching and jointing work on the LV/HV distribution network. This will also include assisting in the restoration of LV supplies as part of fault working and system emergencies. This will be done by observing the work in progress to ensure correct procedures are being followed with particular regard to PPE and safe working practices for the task in hand. Duties: Observe all work being carried out on: live LV apparatus with exposed conductors. Ensure safe use of equipment following health & safety procedures and network standards specifically that colleagues on site are also wearing the relevant PPE. (This forms part of the duty of care of all operational staff under the Health and Safety at Work Act 1974). To deter members of the public distracting staff while working on live equipment, and ensure 'Do Not Disturb' signs are prominently displayed and whilst live electrical work is in progress. Set equipment up for the Fitter/Jointer including preparation of work, laying out tools and equipment for a task and equipping the vehicle to enable jobs to be carried out. Assists the Fitter/Jointer when he/she carries out work on live 240/415v apparatus, conductors or equipment following appropriate safety procedures. Use appropriate IT equipment such as Toughpads, SAP data collection devices- an electronic job issuing system. Assist the Fitter/Jointer with all aspects of maintaining and inspecting the LV and HV network. Support the Fitter/Jointer regarding uses own judgement to undertake risk assessment of a job regarding feasibility, safety, knowledge of tools and equipment and communicate with Field Engineers The post holder undertakes a system emergency storm role where he/she carries out following network standards and safety requirements. Qualifications: Educated to at least GCSE level or equivalent. An understanding of the Electricity at Work Act including understanding electrical diagrams and maps i.e. points of isolation/earthing New Roads & Streetworks Act (NRSWA) - Units 1, 2 and 3 achieved. Training would initially be at a training centre for a basic grasp of policy and health & safety. Craft Attendants would learn on the job. Trained in First Aid Awareness of policies relating to network standards and Health & Safety. Leading to a sound knowledge of electrical distribution. The Craft Attendant has to be aware of such policies but only enough so as to escalate to the craftsperson if he/she felt there was a failure to follow a policy. Full UK driving licence required.
Sep 04, 2025
Full time
81253 - Craft Attendant Jointer This Craft Attendant Jointer will report to the field staff supervisor and will work within network operations based in our Covent Garden office. You will be a permanent employee in our UK Power Networks team. You will attract a salary of 38,434 + benefits and a bonus of 3%. If you are successful, you will need to undertake a medical and DBS reference check Close Date: .15/09/2025 We also provide the following additional benefits 25 Days Annual Leave plus bank holidays. Reservist Leave - Additional 18 days full pay and 22 unpaid Personal Pension Plan - Personal contribution rates of 4% or 5% (UK Power Networks will make a corresponding contribution of 8% or 10%) Tenancy Loan Deposit Scheme, Season Ticket Loan Tax efficient benefits: Cycle to Work, Home & Tech, and Green Car Leasing Schemes Occupational Health support Switched On - scheme providing discount on hundreds of retailers' products Discounted gym membership Employee Assistance Programme Job Purpose To work as part of a team to deliver the enhanced fault response performance within the London area. This includes liaison with customers, network operations and control management of contractors. This will involve working with the full-time dedicated customer champions within the team. The post holder is required to assist the craftsperson in their role in terms of network maintenance, reinforcement, alterations and fault repairs on the LV/HV distribution network involving switching and jointing work on the LV/HV distribution network. This will also include assisting in the restoration of LV supplies as part of fault working and system emergencies. This will be done by observing the work in progress to ensure correct procedures are being followed with particular regard to PPE and safe working practices for the task in hand. Duties: Observe all work being carried out on: live LV apparatus with exposed conductors. Ensure safe use of equipment following health & safety procedures and network standards specifically that colleagues on site are also wearing the relevant PPE. (This forms part of the duty of care of all operational staff under the Health and Safety at Work Act 1974). To deter members of the public distracting staff while working on live equipment, and ensure 'Do Not Disturb' signs are prominently displayed and whilst live electrical work is in progress. Set equipment up for the Fitter/Jointer including preparation of work, laying out tools and equipment for a task and equipping the vehicle to enable jobs to be carried out. Assists the Fitter/Jointer when he/she carries out work on live 240/415v apparatus, conductors or equipment following appropriate safety procedures. Use appropriate IT equipment such as Toughpads, SAP data collection devices- an electronic job issuing system. Assist the Fitter/Jointer with all aspects of maintaining and inspecting the LV and HV network. Support the Fitter/Jointer regarding uses own judgement to undertake risk assessment of a job regarding feasibility, safety, knowledge of tools and equipment and communicate with Field Engineers The post holder undertakes a system emergency storm role where he/she carries out following network standards and safety requirements. Qualifications: Educated to at least GCSE level or equivalent. An understanding of the Electricity at Work Act including understanding electrical diagrams and maps i.e. points of isolation/earthing New Roads & Streetworks Act (NRSWA) - Units 1, 2 and 3 achieved. Training would initially be at a training centre for a basic grasp of policy and health & safety. Craft Attendants would learn on the job. Trained in First Aid Awareness of policies relating to network standards and Health & Safety. Leading to a sound knowledge of electrical distribution. The Craft Attendant has to be aware of such policies but only enough so as to escalate to the craftsperson if he/she felt there was a failure to follow a policy. Full UK driving licence required.
Mobile HGV Technician Location: Greater Manchester, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Sep 04, 2025
Full time
Mobile HGV Technician Location: Greater Manchester, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Role: Plant Fitter Location: Birmingham Employer: Plant Company Salary: 35,000 - 37,000 per annum Platinum Recruitment is working with an award winning Plant company. This is an opportunity for an experienced Plant Fitter Benefits for an Plant Fitter Company bonus Company vehicle Great pension scheme Great progression On site parking OT on offer Responsibilities for an Plant Fitter Working on a wide range of machinery such as diggers, dumpers, telehandlers etc carrying out services, repairs and maintenance Accurately diagnose and repair machinery faults to ensure optimal performance and safety, in compliance with manufacturer specifications Carrying out maintenance checks Requirements for Plant Fitter Full UK Driving licence Can do attitude Must have a NVQ Level 3 in Engineering, Plant, HGV or Construction Previous Plant experience Other industries considered; Plant / HGV / Powered Access / Generator / Heavy plant / Forklifts / Agricultural Sound like the role for you? We look forward to hearing from you! Click Apply Now and one of the team will be in touch to discuss this Plant Fitter in Birmingham Don't forget to speak to your consultant about our "Recommend a Friend" referral scheme and find out how you could earn up to 250 per recommendation. Consultant: Mel Dickinson Job Number: (phone number removed) / INDPLANT Job Role: Plant Fitter Location: Birmingham Platinum Recruitment is acting as an Employment Agency in relation to this vacancy.
Sep 04, 2025
Full time
Role: Plant Fitter Location: Birmingham Employer: Plant Company Salary: 35,000 - 37,000 per annum Platinum Recruitment is working with an award winning Plant company. This is an opportunity for an experienced Plant Fitter Benefits for an Plant Fitter Company bonus Company vehicle Great pension scheme Great progression On site parking OT on offer Responsibilities for an Plant Fitter Working on a wide range of machinery such as diggers, dumpers, telehandlers etc carrying out services, repairs and maintenance Accurately diagnose and repair machinery faults to ensure optimal performance and safety, in compliance with manufacturer specifications Carrying out maintenance checks Requirements for Plant Fitter Full UK Driving licence Can do attitude Must have a NVQ Level 3 in Engineering, Plant, HGV or Construction Previous Plant experience Other industries considered; Plant / HGV / Powered Access / Generator / Heavy plant / Forklifts / Agricultural Sound like the role for you? We look forward to hearing from you! Click Apply Now and one of the team will be in touch to discuss this Plant Fitter in Birmingham Don't forget to speak to your consultant about our "Recommend a Friend" referral scheme and find out how you could earn up to 250 per recommendation. Consultant: Mel Dickinson Job Number: (phone number removed) / INDPLANT Job Role: Plant Fitter Location: Birmingham Platinum Recruitment is acting as an Employment Agency in relation to this vacancy.
Mobile HGV Technician Location: Northampton, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Sep 04, 2025
Full time
Mobile HGV Technician Location: Northampton, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Control Panel Wireman - Clydebank Join a Leading Switchgear Manufacturer First Achieves Engineering Team is actively recruiting a Control Panel Wireman to join our client's team in Clydebank. This is an excellent opportunity for an experienced Electrical Fitter looking to advance their career with a respected industry leader. About the Role: Our client operates a four-day working week at their Clydebank factory, giving you the benefit of a long weekend every week! Please note, due to the hands-on nature of this role, remote or hybrid working options are not available. Key Responsibilities: Accurately reading and interpreting electrical drawings to wire control panels Wiring and fitting of control panels, switchgear, switchboards, and distribution boards Common control wiring and PLC wiring Fitting copper busbars Wiring and assembling Motor Control Centres (MCCs) Occasional UK-based site visits may be required Skills & Experience: Proven experience in a similar panel wiring role is essential Strong knowledge of switchgear and switchboard wiring Experience with electrical testing of switchgear panels and MCCs is a plus Relevant qualifications or time-served apprenticeship preferred What's in it for you? Four-day working week with no weekend work - enjoy a guaranteed long weekend every week Opportunity to grow within a well-established manufacturing company Competitive salary circa 35,000 per annum If you're a skilled Electrical Fitter eager to develop your career with a forward-thinking employer, we'd love to hear from you. Please note at this time we are not offering sponsorship for the role.
Sep 04, 2025
Full time
Control Panel Wireman - Clydebank Join a Leading Switchgear Manufacturer First Achieves Engineering Team is actively recruiting a Control Panel Wireman to join our client's team in Clydebank. This is an excellent opportunity for an experienced Electrical Fitter looking to advance their career with a respected industry leader. About the Role: Our client operates a four-day working week at their Clydebank factory, giving you the benefit of a long weekend every week! Please note, due to the hands-on nature of this role, remote or hybrid working options are not available. Key Responsibilities: Accurately reading and interpreting electrical drawings to wire control panels Wiring and fitting of control panels, switchgear, switchboards, and distribution boards Common control wiring and PLC wiring Fitting copper busbars Wiring and assembling Motor Control Centres (MCCs) Occasional UK-based site visits may be required Skills & Experience: Proven experience in a similar panel wiring role is essential Strong knowledge of switchgear and switchboard wiring Experience with electrical testing of switchgear panels and MCCs is a plus Relevant qualifications or time-served apprenticeship preferred What's in it for you? Four-day working week with no weekend work - enjoy a guaranteed long weekend every week Opportunity to grow within a well-established manufacturing company Competitive salary circa 35,000 per annum If you're a skilled Electrical Fitter eager to develop your career with a forward-thinking employer, we'd love to hear from you. Please note at this time we are not offering sponsorship for the role.
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,970 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Monday - Friday (working 1 Saturday in 3, at overtime rate) Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, Agricultural Engineer former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter. Finning is a forces-friendly employer having signed the Armed Forces Covenant, and pledges to treat those who serve or have served in the armed forces, and their families fairly.
Sep 03, 2025
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,970 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Monday - Friday (working 1 Saturday in 3, at overtime rate) Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, Agricultural Engineer former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter. Finning is a forces-friendly employer having signed the Armed Forces Covenant, and pledges to treat those who serve or have served in the armed forces, and their families fairly.
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,970 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Monday - Friday (working 1 Saturday in 3, at overtime rate) Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, Agricultural Engineer former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter. Finning is a forces-friendly employer having signed the Armed Forces Covenant, and pledges to treat those who serve or have served in the armed forces, and their families fairly.
Sep 03, 2025
Full time
Company: Finning (UK) Ltd Number of Openings: 1 Worker Type: Permanent Position Overview: As a Preventative Maintenance Engineer, you will work in conjunction with the controller, to maximise the operational availability of equipment for the customer through timely and efficient routine and preventative maintenance servicing and machine inspections. Identifying possible issue's which may impact availability as well as being tasked with carrying out minor repairs as requested. During this role you will be an ambassador for safety, by servicing the products in a manner which promotes safety for self and customer. Job Description: Rollo has a long, established and successful heritage in the construction plant and power generation industries. As a part of the Finning Group, Rollo has access to the skills and expertise of one of the premium service providers in the plant and power generation industry, benefiting from world-class facilities, the latest technology and training, tooling, and industry leading safety and quality processes. Major Job Functions Preventative Maintenance Servicing (carrying out routine servicing of equipment in line with manufacturers guidelines, taking routine oil samples) 75% Machine Inspection (carry out visual / mechanical analysis of machine condition highlighting developing issues with systems and components including hydraulic, electrical, powertrain, mechanical) 20% Minor Repairs (complete minor repairs as identified during machine inspection, carry out installation of telematic systems, carry out undercarriage inspections) 5% As a Finning employee, you will receive: Salary £33,970 25 days holiday (purchase up to 5 extra days holiday) Annual Bonus Annual Tool Allowance Healthcare benefits (medical, optical, hearing, dentistry, and new child payments to support new parents) Access to company share scheme Up to 7% pension Life insurance Laptop and phone, van Industry leading CAT product training Overtime Additionally, you will benefit from enhanced maternity and paternity packages, family-friendly policies to support working parents, enhanced flexible working options, support from a team of 40+ Mental Health first aiders, employee wellbeing solutions, the opportunity to work with your charity of choice, and length of service & recognition awards. This is a field-based role. For this position it is essential that all drivers have held a full driving licence for 2 years. (Eligibility will be subject to a full DVLA licence check) Working Hours - 43hrs per week (flexi start and finish times). Working pattern Monday - Friday (working 1 Saturday in 3, at overtime rate) Specific Skills The job requires a basic knowledge of the four main product elements (Engines, Hydraulics, Powertrain, and Vehicle Electrics/Electronics) relating to servicing and repair of heavy mobile plant (or similar e.g Heavy Goods Vehicle) Accountability To attend customer locations as advised by controller, to carry out preventive maintenance servicing. To liaise with service controller and customer both at the outset and as work progresses. To ensure that all work is carried out to high standards and that equipment is safe before handing back to customer. Ensure equipment is serviced in line with manufacturers recommendations and that all associated paperwork is completed accurately and in a timely manner including recording customer signatures. Take proper care of company vehicle and equipment. Education and Experience Either direct experience (around 3 years) or working in a related engineering function, e.g. car mechanic, HGV fitter, Agricultural Engineer former REME or experience on military vehicles such as recovery mechanic or a formal apprenticeship qualification that includes at least C&G level 1, formal training in health & Safety desirable but not essential as further training will be given. This position is a great opportunity for engineers with transferable skills looking to get into the plant industry. Training for the role will be provided, there are opportunities for employees in this role to progress into a field service position in the future following further development. If you would like to work for a global organisation offering industry leading training and a competitive package, then apply online today! At Finning, we prioritize creating a diverse and inclusive environment. We are proud to be an equal opportunity employer, and we actively encourage all individuals to express themselves and achieve their full potential. As a company, we continuously strive to enhance our outreach to individuals of all backgrounds and identities. We do not discriminate against applicants based on gender identity, race, national and ethnic origin, religion, age, sexual orientation, marital and family status, and/or mental or physical disabilities. Furthermore, Finning is committed to collaborating with and providing reasonable accommodations /adjustments to individuals with disabilities. If you require an adjustment/accommodation at any point during the recruitment process, please inform your recruiter. Finning is a forces-friendly employer having signed the Armed Forces Covenant, and pledges to treat those who serve or have served in the armed forces, and their families fairly.
Electrical Fitter Based in Birmingham Monday-Friday Day Shifts 42 to 60 Hours per week Outside IR35 This leading manufacturer of process equipment is currently on a rapid growth phase and is winning a variety of new projects. Following successful contracts, the company is now looking for an Electrical Fitter to join the team. If you are looking for a new contract, then please contact Adil Shaikh on (phone number removed) or email (url removed) The day-to-day responsibilities of the Installation Electrician will include the following: Machine wiring, labelling, and terminating Building components from schematic drawings Installing conduit and routing field cables IO checking and pneumatic piping (light involvement) Working with 24V control systems, HMIs, PLCs, barcodes, scanners, remote I/O The Installation Electrician must possess the following skills & experience: Previous electrical installation experience within a Manufacturing/FMCG environment. Panel modification and machine wiring experience Installation and electrical wiring qualification 18th Edition qualification or equivalent The benefits of this position: Established 3-month rolling contract. Monday to Friday Day shifts 42 to 60 hours per week Outside IR35 Ltd Company Contract To be considered for this role please either hit the 'Apply' button on this site or email your CV directly to (url removed) I can also be contacted directly on (phone number removed). I look forward to hearing from you! ATA Recruitment specialise in the recruitment of Engineers across the UK, so if this role is not for you, please do have a look on our website for further potential opportunities which may suit your skills and experience better - If you have the skill, we have the recruitment knowledge and together we can find you your perfect job! - (url removed) You must be eligible to live and work within the UK. Sponsorship is not provided. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Sep 03, 2025
Contractor
Electrical Fitter Based in Birmingham Monday-Friday Day Shifts 42 to 60 Hours per week Outside IR35 This leading manufacturer of process equipment is currently on a rapid growth phase and is winning a variety of new projects. Following successful contracts, the company is now looking for an Electrical Fitter to join the team. If you are looking for a new contract, then please contact Adil Shaikh on (phone number removed) or email (url removed) The day-to-day responsibilities of the Installation Electrician will include the following: Machine wiring, labelling, and terminating Building components from schematic drawings Installing conduit and routing field cables IO checking and pneumatic piping (light involvement) Working with 24V control systems, HMIs, PLCs, barcodes, scanners, remote I/O The Installation Electrician must possess the following skills & experience: Previous electrical installation experience within a Manufacturing/FMCG environment. Panel modification and machine wiring experience Installation and electrical wiring qualification 18th Edition qualification or equivalent The benefits of this position: Established 3-month rolling contract. Monday to Friday Day shifts 42 to 60 hours per week Outside IR35 Ltd Company Contract To be considered for this role please either hit the 'Apply' button on this site or email your CV directly to (url removed) I can also be contacted directly on (phone number removed). I look forward to hearing from you! ATA Recruitment specialise in the recruitment of Engineers across the UK, so if this role is not for you, please do have a look on our website for further potential opportunities which may suit your skills and experience better - If you have the skill, we have the recruitment knowledge and together we can find you your perfect job! - (url removed) You must be eligible to live and work within the UK. Sponsorship is not provided. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
HGV Trailer Technician Stoke On Trent 38,000 OTE 45,000 (Enhanced Overtime available) Transport and Logistics Services provider Monday - Friday only 40 Hours per week Optional and lots of Overtime available (Time and half and Double on Sundays) Lots of investment into your training and development Up to 37 days annual leave Private Healthcare cover for all employees for you and your family Excellent benefits Please contact Rochelle on (phone number removed) for more information Trailer Technician / Trailer Mechanic - Our client is a long-established and respected commercial vehicle service company. Due to continued expansion, we're seeking experienced Trailer Technicians to join their skilled team in Stoke. If you're ready to take your career to the next level - this is the opportunity you've been waiting for. The job: HGV Trailer Technician / Trailer Technician Perform detailed inspections, servicing, and repairs on Trailers, maintaining the highest standards of safety and functionality. The role of the Trailer Technician is to carry out all aspects of detailed inspections, servicing, and repairs on trailers, maintaining the highest standards of safety and functionality. Accurately and efficiently complete all compliance documentation. Diagnose and resolve issues using EBS systems such as HALDEX, WABCO, and KNORR BREMSE. Deliver exceptional customer service while meeting tight deadlines. Follow all health and safety guidelines to maintain a safe and secure work environment Excellent communication skills and ability to communicate with customers and employees of all levels is essential, as are a 'can do attitude' and problem-solving skills. Experience required: HGV Trailer Technician / Trailer Technician Semi-Trailer or Heavy Vehicle experience. Industry standard qualifications such as City & Guilds or NVQs. Desirable: HGV Class 1 driving licence. IRTEC accreditation. EBS diagnostics experience, including Knorr Bremse, Haldex, and WABCO systems. Welding certification. Training or experience with axle manufacturers such as BPW, SAF, or JOST. Double deck or lifting deck maintenance experience IND123 If you would like to discuss the Trailer Technician position in more detail, then please call Rochelle at Clear Automotive on (phone number removed) for a confidential chat. HGV Technicians, Plant Technicians, Army Engineers, Mechanical Fitters, Heavy Vehicle Mechanics, Maintenance Engineers, Heavy Equipment Fitters, Diesel Mechanics, Plant Maintenance Technicians, Plant Engineers, and Equipment Repair Technicians.
Sep 03, 2025
Full time
HGV Trailer Technician Stoke On Trent 38,000 OTE 45,000 (Enhanced Overtime available) Transport and Logistics Services provider Monday - Friday only 40 Hours per week Optional and lots of Overtime available (Time and half and Double on Sundays) Lots of investment into your training and development Up to 37 days annual leave Private Healthcare cover for all employees for you and your family Excellent benefits Please contact Rochelle on (phone number removed) for more information Trailer Technician / Trailer Mechanic - Our client is a long-established and respected commercial vehicle service company. Due to continued expansion, we're seeking experienced Trailer Technicians to join their skilled team in Stoke. If you're ready to take your career to the next level - this is the opportunity you've been waiting for. The job: HGV Trailer Technician / Trailer Technician Perform detailed inspections, servicing, and repairs on Trailers, maintaining the highest standards of safety and functionality. The role of the Trailer Technician is to carry out all aspects of detailed inspections, servicing, and repairs on trailers, maintaining the highest standards of safety and functionality. Accurately and efficiently complete all compliance documentation. Diagnose and resolve issues using EBS systems such as HALDEX, WABCO, and KNORR BREMSE. Deliver exceptional customer service while meeting tight deadlines. Follow all health and safety guidelines to maintain a safe and secure work environment Excellent communication skills and ability to communicate with customers and employees of all levels is essential, as are a 'can do attitude' and problem-solving skills. Experience required: HGV Trailer Technician / Trailer Technician Semi-Trailer or Heavy Vehicle experience. Industry standard qualifications such as City & Guilds or NVQs. Desirable: HGV Class 1 driving licence. IRTEC accreditation. EBS diagnostics experience, including Knorr Bremse, Haldex, and WABCO systems. Welding certification. Training or experience with axle manufacturers such as BPW, SAF, or JOST. Double deck or lifting deck maintenance experience IND123 If you would like to discuss the Trailer Technician position in more detail, then please call Rochelle at Clear Automotive on (phone number removed) for a confidential chat. HGV Technicians, Plant Technicians, Army Engineers, Mechanical Fitters, Heavy Vehicle Mechanics, Maintenance Engineers, Heavy Equipment Fitters, Diesel Mechanics, Plant Maintenance Technicians, Plant Engineers, and Equipment Repair Technicians.
Mobile HGV Technician Location: Enfield, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Sep 03, 2025
Full time
Mobile HGV Technician Location: Enfield, Field Based Salary: up to 44k Hours: 7.30-4.00 Mon to Fri (38.75 hours) Overtime available The Role We are looking for a qualified and experienced Mobile HGV Technician to join a world-renowned multinational company and assist with the service and maintenance of specialist HGVs. If you have worked as a heavy Plant Fitter, HGV Technician, PSV technician/Bus mechanic, I would be very keen to speak to you about the position. Key duties of the Mobile HGV Technician Diagnostic analysis, repairs or preventative maintenance Provide a customer facing product support Complete PDI inspections Repair equipment and vehicles at depot or on site as required to ensure conformance with manufacturer's specification and company policy Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard. Handover equipment to customers and familiarise customers with safe operation in accordance with company procedures. Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required Accurately complete all relevant paperwork including engineer's reports, inspections, calibrations check and job sheets. Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings Experience required for the Mobile HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of electronic diagnostic equipment. Hands-on experience with a range of HGVs and specialist vehicles. Other: Full UK driving licence. Good work ethic Willing to learn City & Guilds Level 3 - Vehicle Mechanical and Electronic Systems (Maintenance & Repair) or equivalent is advantageous What We Offer A varied and rewarding full-time role with a market-leading company. A supportive team environment with opportunities for training and personal development. Excellent benefits package including: Company pension scheme Cycle-to-work scheme Free or subsidised travel Wellness programme Further training and career progression opportunities For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.
Roadside Vehicle Technician Location: you will have a geographical area based on where you live so this isn t crucial. This position is covering the Stratford area. Salary: £53,625 basic, OTE £58,000. Hours: varying shift patterns Monday to Sunday 40 hours. Earliest start time of 6am, latest finish time of 12am. (Lots of overtime available paid at time and a half) Ref: 28631 We have exciting new opportunities for Roadside Vehicle Technicians. We are recruiting across the area so we will tailor the area to you based on your location. This Roadside Vehicle Technician is working for one of the UK s leading vehicle breakdown companies who provider a first-class service to thousands of customers. Looking for people to start ASAP Exceptional company to work for with a wide range of benefits including starting your day as soon as you start the van Fantastic Benefits for Roadside Vehicle Technician • No additional travel time - start and finish on your driveway. • Training from day 1 • A fully equipped state of the art company vehicle with tools and uniform • Free breakdown cover for you and your household • Access to a broad range of career progression opportunities and industry leading training • Company life assurance linked to pension • Flexible benefits site providing numerous benefits including health and wellbeing. Roadside Vehicle Technician Role • Working closely with the breakdown team you will be tasked with attending breakdowns to diagnose issues they have. Working on the vehicles to ideally get them back on the road otherwise making sure the vehicle goes back to the workshop. • Identifying problems and advising the customer on the vehicle s issues. • Vehicle servicing & general maintenance including electrical & vehicle Diagnostics. • Mobile Vehicle Technician / Roadside Technician are the face of the business so its important you deliver exceptional Customer Service. Roadside Vehicle Technician Requirements • We are ideally looking for a Level 3 qualified Vehicle Technician, if you are Level 2 or time served we can discuss options • Must hold a full UK driving licence • Have a strong all round technical experience maintenance, Technical, Electrical, and Diagnostic experience How to Apply We offer a competitive salary, benefits package, and opportunities for growth and advancement. If you are a skilled and dedicated vehicle technician who is passionate about cars and committed to delivering high-quality work, please submit your resume for consideration. All applications will be treated with the utmost confidentiality. Consultant: Yvonne Martin - Octane Recruitment VTSTH Octane Recruitment is a leading recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment covers a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.
Sep 03, 2025
Full time
Roadside Vehicle Technician Location: you will have a geographical area based on where you live so this isn t crucial. This position is covering the Stratford area. Salary: £53,625 basic, OTE £58,000. Hours: varying shift patterns Monday to Sunday 40 hours. Earliest start time of 6am, latest finish time of 12am. (Lots of overtime available paid at time and a half) Ref: 28631 We have exciting new opportunities for Roadside Vehicle Technicians. We are recruiting across the area so we will tailor the area to you based on your location. This Roadside Vehicle Technician is working for one of the UK s leading vehicle breakdown companies who provider a first-class service to thousands of customers. Looking for people to start ASAP Exceptional company to work for with a wide range of benefits including starting your day as soon as you start the van Fantastic Benefits for Roadside Vehicle Technician • No additional travel time - start and finish on your driveway. • Training from day 1 • A fully equipped state of the art company vehicle with tools and uniform • Free breakdown cover for you and your household • Access to a broad range of career progression opportunities and industry leading training • Company life assurance linked to pension • Flexible benefits site providing numerous benefits including health and wellbeing. Roadside Vehicle Technician Role • Working closely with the breakdown team you will be tasked with attending breakdowns to diagnose issues they have. Working on the vehicles to ideally get them back on the road otherwise making sure the vehicle goes back to the workshop. • Identifying problems and advising the customer on the vehicle s issues. • Vehicle servicing & general maintenance including electrical & vehicle Diagnostics. • Mobile Vehicle Technician / Roadside Technician are the face of the business so its important you deliver exceptional Customer Service. Roadside Vehicle Technician Requirements • We are ideally looking for a Level 3 qualified Vehicle Technician, if you are Level 2 or time served we can discuss options • Must hold a full UK driving licence • Have a strong all round technical experience maintenance, Technical, Electrical, and Diagnostic experience How to Apply We offer a competitive salary, benefits package, and opportunities for growth and advancement. If you are a skilled and dedicated vehicle technician who is passionate about cars and committed to delivering high-quality work, please submit your resume for consideration. All applications will be treated with the utmost confidentiality. Consultant: Yvonne Martin - Octane Recruitment VTSTH Octane Recruitment is a leading recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment covers a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.
We're hiring skilled Duct Fitters to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. Responsibilities: Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. Requirements : Recognised Trade Papers / Modern Apprenticeship Certificate - essential. Experience in large-scale marine, oil & gas, or industrial manufacturing . Solid understanding of SHE, COSHH , and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work.
Sep 03, 2025
Full time
We're hiring skilled Duct Fitters to join a long-term programme building some of the UK's most advanced naval platforms - a multi-year career opportunity with serious scope. This is hands-on, skilled work where your craftsmanship will directly contribute to a high-profile defence platform. You'll be part of a tight-knit team shaping complex metal structures in a dynamic shipbuilding environment. Responsibilities: Interpreting and working from technical drawings to high engineering standards. Using a variety of hand tools and manual techniques to deliver precision work. Working in tight, confined, or elevated areas safely and efficiently. Supporting first-time quality standards - this isn't rework; it's right-first-time. Requirements : Recognised Trade Papers / Modern Apprenticeship Certificate - essential. Experience in large-scale marine, oil & gas, or industrial manufacturing . Solid understanding of SHE, COSHH , and general site safety standards. Confidence working in confined spaces or at height when required. A strong eye for detail and a pride in the quality of your work.
Skilled Aircraft Fitter - Aerospace - Filton, On-site CONTRACT OPPORTUNITY AVAILABLE WITHIN A LEADING AEROSPACE COMPANY FOR A SKILLED AIRCRAFT FITTER £26.92/ph inside IR35 Initial 12-month initial contract with likely extensions Possibility of a permanent role during the contract Onsite in Filton 6:30-15:45 Monday to Thursday with overtime available ABOUT THE CLIENT: Our client is a leading global name in aerospace, responsible for designing, manufacturing, and testing wings for some of the world's most advanced aircraft. Their Filton site plays a vital role in the aerospace supply chain, supporting both commercial and military aviation sectors. Due to a growing pipeline of work, they are looking to recruit a number of Skilled Aircraft Fitters to support production operations for their A400M programme. WHAT WILL THE SKILLED AIRCRAFT FITTER BE DOING? As an Aircraft Fitter, you'll be based in the build production section supporting aircraft wing assembly. Your tasks will include working from engineering drawings, using power tools to drill, shim and seal, and ensuring all work meets the required standards. The role involves tank work, so working in confined spaces will be necessary. You will also be expected to obtain 1st party certification following relevant training. WE NEED THE SKILLED AIRCRAFT FITTER TO HAVE . A time served engineering apprenticeship City & Guilds Level 2, BTEC ONC or NVQ Level 2/3 in a relevant engineering discipline The willingness to work in confined spaces Experience using hand tools and working in a fitter/assembly operator role The ability to go through a BPSS check and pass a pre-employment medical TO BE CONSIDERED. Please either apply through this advert or email me directly via (see below) For further information, please call me. By applying for this role, you give express consent for us to process and submit (subject to required skills) your application to our client in conjunction with this vacancy only.
Sep 03, 2025
Contractor
Skilled Aircraft Fitter - Aerospace - Filton, On-site CONTRACT OPPORTUNITY AVAILABLE WITHIN A LEADING AEROSPACE COMPANY FOR A SKILLED AIRCRAFT FITTER £26.92/ph inside IR35 Initial 12-month initial contract with likely extensions Possibility of a permanent role during the contract Onsite in Filton 6:30-15:45 Monday to Thursday with overtime available ABOUT THE CLIENT: Our client is a leading global name in aerospace, responsible for designing, manufacturing, and testing wings for some of the world's most advanced aircraft. Their Filton site plays a vital role in the aerospace supply chain, supporting both commercial and military aviation sectors. Due to a growing pipeline of work, they are looking to recruit a number of Skilled Aircraft Fitters to support production operations for their A400M programme. WHAT WILL THE SKILLED AIRCRAFT FITTER BE DOING? As an Aircraft Fitter, you'll be based in the build production section supporting aircraft wing assembly. Your tasks will include working from engineering drawings, using power tools to drill, shim and seal, and ensuring all work meets the required standards. The role involves tank work, so working in confined spaces will be necessary. You will also be expected to obtain 1st party certification following relevant training. WE NEED THE SKILLED AIRCRAFT FITTER TO HAVE . A time served engineering apprenticeship City & Guilds Level 2, BTEC ONC or NVQ Level 2/3 in a relevant engineering discipline The willingness to work in confined spaces Experience using hand tools and working in a fitter/assembly operator role The ability to go through a BPSS check and pass a pre-employment medical TO BE CONSIDERED. Please either apply through this advert or email me directly via (see below) For further information, please call me. By applying for this role, you give express consent for us to process and submit (subject to required skills) your application to our client in conjunction with this vacancy only.
