EXCITING OPPORTUNITY FOR A SENIOR/JUNIOR ELECTRONICS TEST ENGINEER JOB IN HAYES, GREATER LONDON Our client are experts in state of the art innovative radar technology across the air, land and sea! They are currently looking for an experienced Electronics Test Engineer to join their production team. You will have responsibility for all aspects of test engineering including fault diagnostics, production support and improvement. Key Responsibilities for the Electronics Test Engineer Job in Hayes, Greater London Testing High Voltage Switch Mode Power Supplies and Travelling Wave Tubes having output voltages of up to 35kV. Ensure the product meets the test parameters for all test result specifications and create evaluation reports. Find failures to component level, identify the root cause and record findings accurately. Assist R&D with testing prototypes Key Requirements for the Electronics Test Engineer Job in Hayes, Greater London Experience in working in an electronics or RF environment. Open to experienced Test Engineers or Graduates with a Degree in RF/Electronics/Physics. Security clearance required A good understanding of both analog and digital circuitry, Ideally some experience with high voltage power supply circuitry. Some experience in understanding documenting test processes and procedures. My client has a strong internal culture of teamwork and work-life balance. They value their employees and strive to create a positive, relaxed and enjoyable working environment.
Sep 04, 2025
Full time
EXCITING OPPORTUNITY FOR A SENIOR/JUNIOR ELECTRONICS TEST ENGINEER JOB IN HAYES, GREATER LONDON Our client are experts in state of the art innovative radar technology across the air, land and sea! They are currently looking for an experienced Electronics Test Engineer to join their production team. You will have responsibility for all aspects of test engineering including fault diagnostics, production support and improvement. Key Responsibilities for the Electronics Test Engineer Job in Hayes, Greater London Testing High Voltage Switch Mode Power Supplies and Travelling Wave Tubes having output voltages of up to 35kV. Ensure the product meets the test parameters for all test result specifications and create evaluation reports. Find failures to component level, identify the root cause and record findings accurately. Assist R&D with testing prototypes Key Requirements for the Electronics Test Engineer Job in Hayes, Greater London Experience in working in an electronics or RF environment. Open to experienced Test Engineers or Graduates with a Degree in RF/Electronics/Physics. Security clearance required A good understanding of both analog and digital circuitry, Ideally some experience with high voltage power supply circuitry. Some experience in understanding documenting test processes and procedures. My client has a strong internal culture of teamwork and work-life balance. They value their employees and strive to create a positive, relaxed and enjoyable working environment.
Order Ref: (phone number removed) Position Title: Software Development Engineer Duration: Contract Location: Gaydon INSIDE IR35 - Up to 21.83 Umbrella PAYE Applicants MUST have proof of immediate, on-going and valid eligibility to work full time in the UK and travel within the EU. About the company I am currently recruiting on behalf of a Luxury Automotive OEM, based in Gaydon, who are seeking a Software Development Engineer to join their team Duties: Software Development Engineering (High Tech) focus on developing multiple types/categories of software including end-user applications and operating systems/utility software, that provides a platform for running end user applications for sale to external customers. The work includes: Conducting requirements gathering and analysis to understand the domain of the software problem and/or functionality, the interfaces between hardware and software, and the overall software characteristics Using programming, scripting, and/or database languages to write the software code Supporting software testing, deployment, maintenance, and evolution activities by correcting programming errors, responding to scope changes, and coding software enhancements Applying knowledge of software development best practices, including coding standards, code reviews, source control management, build processes, testing, and operations Level: An Experienced Professional (P2) applies practical knowledge of job area typically obtained through advanced education and work experience. Responsibilities typically include: Works independently with general supervision. Problems faced are difficult but typically not complex. May influence others within the job area through explanation of facts, policies and practices. Why work through Contechs? Contechs is a leading Automotive, Design, Engineering, Technology and Innovation Recruitment Consultancy. Founded in 1997, with an inhouse Contractor Care Team to support all external employees, acts as an employment agency for permanent and contract recruitment. How to Apply If you're interested in applying for this position, submit your application and one of our recruiters will be in touch. If you know anyone that is suitable for the role, please visit the below page where we offer up to 600 referral fee: (url removed)>
Sep 04, 2025
Contractor
Order Ref: (phone number removed) Position Title: Software Development Engineer Duration: Contract Location: Gaydon INSIDE IR35 - Up to 21.83 Umbrella PAYE Applicants MUST have proof of immediate, on-going and valid eligibility to work full time in the UK and travel within the EU. About the company I am currently recruiting on behalf of a Luxury Automotive OEM, based in Gaydon, who are seeking a Software Development Engineer to join their team Duties: Software Development Engineering (High Tech) focus on developing multiple types/categories of software including end-user applications and operating systems/utility software, that provides a platform for running end user applications for sale to external customers. The work includes: Conducting requirements gathering and analysis to understand the domain of the software problem and/or functionality, the interfaces between hardware and software, and the overall software characteristics Using programming, scripting, and/or database languages to write the software code Supporting software testing, deployment, maintenance, and evolution activities by correcting programming errors, responding to scope changes, and coding software enhancements Applying knowledge of software development best practices, including coding standards, code reviews, source control management, build processes, testing, and operations Level: An Experienced Professional (P2) applies practical knowledge of job area typically obtained through advanced education and work experience. Responsibilities typically include: Works independently with general supervision. Problems faced are difficult but typically not complex. May influence others within the job area through explanation of facts, policies and practices. Why work through Contechs? Contechs is a leading Automotive, Design, Engineering, Technology and Innovation Recruitment Consultancy. Founded in 1997, with an inhouse Contractor Care Team to support all external employees, acts as an employment agency for permanent and contract recruitment. How to Apply If you're interested in applying for this position, submit your application and one of our recruiters will be in touch. If you know anyone that is suitable for the role, please visit the below page where we offer up to 600 referral fee: (url removed)>
Order Ref: (phone number removed) Position Title: Battery Test Automation Engineer Duration: Contract Location: Gaydon Applicants MUST have proof of immediate, on-going and valid eligibility to work full time in the UK and travel within the EU. About the company I am currently recruiting on behalf of an automotive OEM, based in Gaydon, who are seeking a Battery Test Automation Engineer to join their team Duties: The Battery Test Automation Engineer role will focus on the delivery of automation tools in support of the development and design verification (DV) of the Clients' HV Traction Battery Systems. You will operate across our internal facilities and external test houses managing automation tools, leading the development of these tools and guiding our colleagues and partners on their use, ensuring adherence to the Clients' safety policies and procedures and planning for future test capabilities, requirements and applications. You'll have responsibility for providing the first line trouble shooting and diagnostic support for all battery test automation tools and issue management across our battery test field. You'll be working with a wide range of engineering customers, skilled test facility operators, suppliers, external agencies and organisations. You'll have responsibility for providing tools and analysing issues across the field to ensure minimal downtime and maximum test efficiency. Skills: Highly proficient in programming languages including CAPL, Python and C++ Expert on CAN/FlexRay/LIN/Ethernet Communication protocols, including use of CANoe and CANalyzer for HV system analysis, diagnostics and test automation Experience in data analysis and visualisation tools and platforms including AVL Concerto, CANalyzer, Tableau, Minitab Experience with automotive network interface tools (such as Vector CANalyzer/CANape/CANoe, INCA, VehicleSpy). Comprehensive understanding of High Voltage HEV/BEV powertrain systems. Technical expertise in HV Battery and Charging technology and facility operations. The ability to validate, prepare and read engineering documents and electrical schematics. Significant experience of data analysis and reporting issues to first-line and senior management Natural problem-solver with structured approach to problem solving in a technical environment. Strong knowledge of Health and Safety requirements, Risk Assessment, COSHH and SDS. Significant experience with data acquisition and control systems. Technical expertise and significant experience of test facility operations and system under test Preparation. Computer literate, including Microsoft Office competency to produce plans, presentations, graphs, process documentation and Single Point Lessons (SPL). A full UK driving license with less than 6 penalty points, no disqualifications. Education: Educated to a minimum of Degree level in a Systems, Computer Science, Electrical/Electronic or related field. Why work through Contechs? Contechs is a leading Automotive, Design, Engineering, Technology and Innovation Recruitment Consultancy. Founded in 1997, with an inhouse Contractor Care Team to support all external employees, acts as an employment agency for permanent and contract recruitment. How to Apply If you're interested in applying for this position, submit your application and one of our recruiters will be in touch. If you know anyone that is suitable for the role, please visit the below page where we offer up to 600 referral fee: (url removed)
Sep 04, 2025
Contractor
Order Ref: (phone number removed) Position Title: Battery Test Automation Engineer Duration: Contract Location: Gaydon Applicants MUST have proof of immediate, on-going and valid eligibility to work full time in the UK and travel within the EU. About the company I am currently recruiting on behalf of an automotive OEM, based in Gaydon, who are seeking a Battery Test Automation Engineer to join their team Duties: The Battery Test Automation Engineer role will focus on the delivery of automation tools in support of the development and design verification (DV) of the Clients' HV Traction Battery Systems. You will operate across our internal facilities and external test houses managing automation tools, leading the development of these tools and guiding our colleagues and partners on their use, ensuring adherence to the Clients' safety policies and procedures and planning for future test capabilities, requirements and applications. You'll have responsibility for providing the first line trouble shooting and diagnostic support for all battery test automation tools and issue management across our battery test field. You'll be working with a wide range of engineering customers, skilled test facility operators, suppliers, external agencies and organisations. You'll have responsibility for providing tools and analysing issues across the field to ensure minimal downtime and maximum test efficiency. Skills: Highly proficient in programming languages including CAPL, Python and C++ Expert on CAN/FlexRay/LIN/Ethernet Communication protocols, including use of CANoe and CANalyzer for HV system analysis, diagnostics and test automation Experience in data analysis and visualisation tools and platforms including AVL Concerto, CANalyzer, Tableau, Minitab Experience with automotive network interface tools (such as Vector CANalyzer/CANape/CANoe, INCA, VehicleSpy). Comprehensive understanding of High Voltage HEV/BEV powertrain systems. Technical expertise in HV Battery and Charging technology and facility operations. The ability to validate, prepare and read engineering documents and electrical schematics. Significant experience of data analysis and reporting issues to first-line and senior management Natural problem-solver with structured approach to problem solving in a technical environment. Strong knowledge of Health and Safety requirements, Risk Assessment, COSHH and SDS. Significant experience with data acquisition and control systems. Technical expertise and significant experience of test facility operations and system under test Preparation. Computer literate, including Microsoft Office competency to produce plans, presentations, graphs, process documentation and Single Point Lessons (SPL). A full UK driving license with less than 6 penalty points, no disqualifications. Education: Educated to a minimum of Degree level in a Systems, Computer Science, Electrical/Electronic or related field. Why work through Contechs? Contechs is a leading Automotive, Design, Engineering, Technology and Innovation Recruitment Consultancy. Founded in 1997, with an inhouse Contractor Care Team to support all external employees, acts as an employment agency for permanent and contract recruitment. How to Apply If you're interested in applying for this position, submit your application and one of our recruiters will be in touch. If you know anyone that is suitable for the role, please visit the below page where we offer up to 600 referral fee: (url removed)
We are seeking a highly skilled Control Systems Engineer working within a small team of multi disciplined engineers. In this role, you will be responsible for designing, developing, and maintaining control systems for a range of industrial applications. You will work closely with cross-functional teams to ensure system reliability, efficiency, and performance. This is a full-time position, based in our Usk offices with occasional travel. Design, program, and commission control systems, including PLCs, SCADA, and HMI systems. Programming Siemens plc Develop and implement automation solutions for manufacturing and process control environments. Troubleshoot and optimize existing control systems to improve efficiency and reliability. Conduct system testing, validation, and performance analysis. Collaborate with mechanical, electrical, and software engineers on project development. Ensure compliance with industry standards, safety regulations, and best practices. Provide technical support, training, and documentation for system users. Degree in Electrical Engineering, Control Systems Engineering, Automation, or a related field. Functional safety qualification advantageous. Proven experience in control systems design, programming, and implementation. Proficiency in PLC programming (Siemens, Allen-Bradley) and SCADA systems. Strong knowledge of industrial networking protocols (Ethernet/IP, Modbus, EtherCat, CAN, Profibus, etc). Experience with motion control, robotics is advantageous. Ability to understand electrical schematics, P&IDs, and technical drawings. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. UK driving licence Able to travel to sites throughout the UK There will be an opportunity for professional development and career advancement.
Sep 04, 2025
Full time
We are seeking a highly skilled Control Systems Engineer working within a small team of multi disciplined engineers. In this role, you will be responsible for designing, developing, and maintaining control systems for a range of industrial applications. You will work closely with cross-functional teams to ensure system reliability, efficiency, and performance. This is a full-time position, based in our Usk offices with occasional travel. Design, program, and commission control systems, including PLCs, SCADA, and HMI systems. Programming Siemens plc Develop and implement automation solutions for manufacturing and process control environments. Troubleshoot and optimize existing control systems to improve efficiency and reliability. Conduct system testing, validation, and performance analysis. Collaborate with mechanical, electrical, and software engineers on project development. Ensure compliance with industry standards, safety regulations, and best practices. Provide technical support, training, and documentation for system users. Degree in Electrical Engineering, Control Systems Engineering, Automation, or a related field. Functional safety qualification advantageous. Proven experience in control systems design, programming, and implementation. Proficiency in PLC programming (Siemens, Allen-Bradley) and SCADA systems. Strong knowledge of industrial networking protocols (Ethernet/IP, Modbus, EtherCat, CAN, Profibus, etc). Experience with motion control, robotics is advantageous. Ability to understand electrical schematics, P&IDs, and technical drawings. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. UK driving licence Able to travel to sites throughout the UK There will be an opportunity for professional development and career advancement.
Operational Engineer 6 months SC CLEARED Hybrid 2/3 days Telford £550 Key Responsibilities: Design, development, and deployment of data integration and transformation solutions using Pentaho, Denodo, Talend, and SAS. Architect and implement scalable data pipelines and services that support Business Intelligence and analytics platforms. Collaborate with cross-functional teams to gather requirements, define technical specifications, and deliver robust data solutions. Champion Agile and Scrum methodologies, ensuring timely delivery of sprints and continuous improvement. Drive DevOps practices for CI/CD, automated testing, and deployment of data services. Mentor and guide junior engineers, fostering a culture of technical excellence and innovation. Ensure data quality, governance, and security standards are upheld across all solutions. Troubleshoot and resolve complex data issues and performance bottlenecks. Key Skills: SAS 9.4 (DI), SAS Viya 3.x (SAS Studio, VA, VI). Platform LSF, Jira, Platform Support. GIT. Strong expertise in ETL tools: Pentaho, Talend. Experience with data virtualization using Denodo. Proficiency in SAS for data analytics and reporting. Oracle (good to have). Solid understanding of Agile and Scrum frameworks. Hands-on experience with DevOps tools and practices (eg, Jenkins, Git, Docker, Kubernetes). Strong SQL and data modelling skills. Excellent problem-solving, communication, and leadership abilities. Key Qualifications: Proven track record of data projects and teams. Certifications in Agile/Scrum, DevOps, or relevant data technologies are a plus.
Sep 04, 2025
Contractor
Operational Engineer 6 months SC CLEARED Hybrid 2/3 days Telford £550 Key Responsibilities: Design, development, and deployment of data integration and transformation solutions using Pentaho, Denodo, Talend, and SAS. Architect and implement scalable data pipelines and services that support Business Intelligence and analytics platforms. Collaborate with cross-functional teams to gather requirements, define technical specifications, and deliver robust data solutions. Champion Agile and Scrum methodologies, ensuring timely delivery of sprints and continuous improvement. Drive DevOps practices for CI/CD, automated testing, and deployment of data services. Mentor and guide junior engineers, fostering a culture of technical excellence and innovation. Ensure data quality, governance, and security standards are upheld across all solutions. Troubleshoot and resolve complex data issues and performance bottlenecks. Key Skills: SAS 9.4 (DI), SAS Viya 3.x (SAS Studio, VA, VI). Platform LSF, Jira, Platform Support. GIT. Strong expertise in ETL tools: Pentaho, Talend. Experience with data virtualization using Denodo. Proficiency in SAS for data analytics and reporting. Oracle (good to have). Solid understanding of Agile and Scrum frameworks. Hands-on experience with DevOps tools and practices (eg, Jenkins, Git, Docker, Kubernetes). Strong SQL and data modelling skills. Excellent problem-solving, communication, and leadership abilities. Key Qualifications: Proven track record of data projects and teams. Certifications in Agile/Scrum, DevOps, or relevant data technologies are a plus.
We are seeking a highly skilled Control Systems Engineer working within a small team of multi disciplined engineers. In this role, you will be responsible for designing, developing, and maintaining control systems for a range of industrial applications. You will work closely with cross-functional teams to ensure system reliability, efficiency, and performance. This is a full-time position, based in our Grimsby offices with occasional travel. Design, program, and commission control systems, including PLCs, SCADA, and HMI systems. Programming Siemens plc Develop and implement automation solutions for manufacturing and process control environments. Troubleshoot and optimize existing control systems to improve efficiency and reliability. Conduct system testing, validation, and performance analysis. Collaborate with mechanical, electrical, and software engineers on project development. Ensure compliance with industry standards, safety regulations, and best practices. Provide technical support, training, and documentation for system users. Degree in Electrical Engineering, Control Systems Engineering, Automation, or a related field. Functional safety qualification advantageous. Proven experience in control systems design, programming, and implementation. Proficiency in PLC programming (Siemens, Allen-Bradley) and SCADA systems. Strong knowledge of industrial networking protocols (Ethernet/IP, Modbus, EtherCat, CAN, Profibus, etc). Experience with motion control, robotics is advantageous. Ability to understand electrical schematics, P&IDs, and technical drawings. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. UK driving licence Able to travel to sites throughout the UK There will be an opportunity for professional development and career advancement.
Sep 04, 2025
Full time
We are seeking a highly skilled Control Systems Engineer working within a small team of multi disciplined engineers. In this role, you will be responsible for designing, developing, and maintaining control systems for a range of industrial applications. You will work closely with cross-functional teams to ensure system reliability, efficiency, and performance. This is a full-time position, based in our Grimsby offices with occasional travel. Design, program, and commission control systems, including PLCs, SCADA, and HMI systems. Programming Siemens plc Develop and implement automation solutions for manufacturing and process control environments. Troubleshoot and optimize existing control systems to improve efficiency and reliability. Conduct system testing, validation, and performance analysis. Collaborate with mechanical, electrical, and software engineers on project development. Ensure compliance with industry standards, safety regulations, and best practices. Provide technical support, training, and documentation for system users. Degree in Electrical Engineering, Control Systems Engineering, Automation, or a related field. Functional safety qualification advantageous. Proven experience in control systems design, programming, and implementation. Proficiency in PLC programming (Siemens, Allen-Bradley) and SCADA systems. Strong knowledge of industrial networking protocols (Ethernet/IP, Modbus, EtherCat, CAN, Profibus, etc). Experience with motion control, robotics is advantageous. Ability to understand electrical schematics, P&IDs, and technical drawings. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. UK driving licence Able to travel to sites throughout the UK There will be an opportunity for professional development and career advancement.
CNC Milling Setter/Operator (Heidenhain) Day Shift Up to £20 per hour + Overtime (x1.25) We are looking for a skilled CNC Milling Setter/Operator to join a long-established precision engineering business with a strong reputation across the automotive, motorsport, aerospace, foundry, and heritage vehicle sectors . With over two decades of industry experience and significant ongoing investment in modern CNC technology, this company offers the chance to work on 3-axis, 3+2 axis, and 5-axis machining projects using state-of-the-art machining centres and advanced CAM software. You'll be joining a friendly, growing team with plenty of opportunities for progression. The Role Setting and operating CNC milling machines (Heidenhain control) Editing programs on the machine (advantageous, but not essential) Working on Mazak and Bridgeport machines Using WorkNC CAM software for complex machining requirements Producing precision components across a wide variety of industries Maintaining excellent surface finishes on materials such as aluminium, tool steel, plastics, and model board About You Experienced CNC Setter/Operator with a background in milling Skilled in Heidenhain controls (essential) Ability to edit at the machine (preferred but not required) A keen eye for detail and commitment to high-quality work Positive team player with a proactive attitude What's On Offer Up to £20 per hour (DOE) Day shift only - great work/life balance Overtime paid at x1.25 Long-established business with 25 CNC machining centres and ongoing investment in the latest equipment Opportunity to work on exciting projects across OEM automotive, motorsport/F1, aerospace, heritage vehicles, and foundry tooling Supportive, skilled team with genuine opportunities for progression This is a fantastic opportunity for a CNC Milling Setter/Operator to work on a variety of challenging projects in a modern, well-equipped environment.
Sep 04, 2025
Full time
CNC Milling Setter/Operator (Heidenhain) Day Shift Up to £20 per hour + Overtime (x1.25) We are looking for a skilled CNC Milling Setter/Operator to join a long-established precision engineering business with a strong reputation across the automotive, motorsport, aerospace, foundry, and heritage vehicle sectors . With over two decades of industry experience and significant ongoing investment in modern CNC technology, this company offers the chance to work on 3-axis, 3+2 axis, and 5-axis machining projects using state-of-the-art machining centres and advanced CAM software. You'll be joining a friendly, growing team with plenty of opportunities for progression. The Role Setting and operating CNC milling machines (Heidenhain control) Editing programs on the machine (advantageous, but not essential) Working on Mazak and Bridgeport machines Using WorkNC CAM software for complex machining requirements Producing precision components across a wide variety of industries Maintaining excellent surface finishes on materials such as aluminium, tool steel, plastics, and model board About You Experienced CNC Setter/Operator with a background in milling Skilled in Heidenhain controls (essential) Ability to edit at the machine (preferred but not required) A keen eye for detail and commitment to high-quality work Positive team player with a proactive attitude What's On Offer Up to £20 per hour (DOE) Day shift only - great work/life balance Overtime paid at x1.25 Long-established business with 25 CNC machining centres and ongoing investment in the latest equipment Opportunity to work on exciting projects across OEM automotive, motorsport/F1, aerospace, heritage vehicles, and foundry tooling Supportive, skilled team with genuine opportunities for progression This is a fantastic opportunity for a CNC Milling Setter/Operator to work on a variety of challenging projects in a modern, well-equipped environment.
Category Manager Manchester £49,000 The Situation Ford and Stanley are currently collaborating with a global company specialising in railway systems. The focus of the company is supplying and maintaining trains, providing technical support, commissioning and testing and operating a manufacturing facility. The Category Manager will take ownership of key categories, drive strategic alignment with international teams, and directly impact business performance and reliability. A vital role that offers the chance to implement creative solutions, and the opportunity to influence processes in a business that values innovation and proactive problem-solving. The Category Manager will be fully responsible for a defined range of categories in the UK market, aligning procurement strategies with the central team in Spain, managing supplier relationships, and supporting local projects. The Opportunity Manage assigned categories (e.g., structure, rubber components, rubber-metal, gearbox, electrical repairs, dumpers, couplers, communication and information equipment). Align category strategies with the central procurement team in Spain. Lead supplier relationship management, including quarterly business reviews, service level agreements, and performance monitoring. Participate in supplier audits and ensure compliance. Collaborate closely with demand planning and project teams to ensure timely delivery of parts and services. Maintain up-to-date reporting on category spend and supplier KPIs. Responsibilities: Compress supplier lead times and ensure reliable, timely delivery of parts. Achieve alignment of UK category strategies with the central procurement team in Spain. Ensure accurate and up-to-date reporting on category spend and supplier KPIs. Essential Criteria CIPS certification (Level 5 preferred) or equivalent. Strong negotiation, contract management, and supplier relationship management experience. Excellent analytical, organisational, and communication skills. Ability to influence senior stakeholders and work cross-functionally. Experience in an engineering-related industry is highly desirable. Salary: £49,000 plus wider company benefits About Ford & Stanley Group Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership, and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing, and retaining the best talent from shop floor to boardroom. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services permanent and temporary. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. Ford & Stanley Executive Search Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East, and Europe. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy.
Sep 04, 2025
Full time
Category Manager Manchester £49,000 The Situation Ford and Stanley are currently collaborating with a global company specialising in railway systems. The focus of the company is supplying and maintaining trains, providing technical support, commissioning and testing and operating a manufacturing facility. The Category Manager will take ownership of key categories, drive strategic alignment with international teams, and directly impact business performance and reliability. A vital role that offers the chance to implement creative solutions, and the opportunity to influence processes in a business that values innovation and proactive problem-solving. The Category Manager will be fully responsible for a defined range of categories in the UK market, aligning procurement strategies with the central team in Spain, managing supplier relationships, and supporting local projects. The Opportunity Manage assigned categories (e.g., structure, rubber components, rubber-metal, gearbox, electrical repairs, dumpers, couplers, communication and information equipment). Align category strategies with the central procurement team in Spain. Lead supplier relationship management, including quarterly business reviews, service level agreements, and performance monitoring. Participate in supplier audits and ensure compliance. Collaborate closely with demand planning and project teams to ensure timely delivery of parts and services. Maintain up-to-date reporting on category spend and supplier KPIs. Responsibilities: Compress supplier lead times and ensure reliable, timely delivery of parts. Achieve alignment of UK category strategies with the central procurement team in Spain. Ensure accurate and up-to-date reporting on category spend and supplier KPIs. Essential Criteria CIPS certification (Level 5 preferred) or equivalent. Strong negotiation, contract management, and supplier relationship management experience. Excellent analytical, organisational, and communication skills. Ability to influence senior stakeholders and work cross-functionally. Experience in an engineering-related industry is highly desirable. Salary: £49,000 plus wider company benefits About Ford & Stanley Group Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership, and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing, and retaining the best talent from shop floor to boardroom. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services permanent and temporary. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. Ford & Stanley Executive Search Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East, and Europe. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy.
Here at Electrical Test Midlands , we re seeking an Electricians Mate to join our team . We have a wide geographical client base so if you re located in the Chesterfield/South Sheffield area we d like to hear from you. In this role, you will be tasked with assisting an experienced, fully qualified Electrical Test Engineer in carrying out inspection and testing of electrical installations. This role is ideal for candidates who have completed City & Guilds Level 2 in Electrical Installation and are looking to gain valuable hands-on experience in electrical testing and compliance work. The role will see you progress, with hard work and commitment, to becoming a fully fledged Electrical Test Engineer. What you receive for joining us: We re looking to offer a salary between £20,800 and £25,396.80 per annum. In addition, we offer a contributory pension scheme, company van, fuel card, uniform and tools you ll need to do the job and 25 days holiday per year plus Bank Holidays. Here s a look at some of the things you ll be doing: Assist the Test Engineer with setting up for electrical inspection and testing procedures (e.g., dead tests, live tests, insulation resistance), including the safe isolation of circuits and systems. Identify and label circuits, record test results, and help document findings and compile test certificates as required. Organise and transport test equipment, tools, and materials to and from job sites, including running temporary power leads and accessing/removing equipment for testing. Maintain a clean, safe, and compliant work area at all times, ensuring adherence to health and safety standards and electrical regulations on-site. Can you show experience in some of these areas: City & Guilds Level 2 in Electrical Installation (or equivalent), with a basic understanding of electrical inspection and testing principles. Strong attention to detail when working around live systems, along with good communication skills and the ability to follow instructions. Physically fit and capable of carrying tools, accessing control panels, distribution boards, and working in varied site conditions. ECS/CSCS card (preferred or willing to obtain), with a full UK driving licence and willingness to travel to multiple sites (preferred). Do you see yourself reflected in the description above? If so, we encourage you to submit your application today. Uncertain whether your skills align perfectly? Don't hesitate to apply regardless; we value candidates with diverse skill sets and will carefully consider all applicants. Introducing our organisation: Electrical Test Midlands: We collaborate with clients in sectors such as Education, Health, Care Homes, Public Sector, Local Authority, Industry, Pharmaceutical, Hospitality, Leisure, Food & Beverage, Retail, and Media, to ensure risk reduction, safety improvement, and regulatory compliance.
Sep 04, 2025
Full time
Here at Electrical Test Midlands , we re seeking an Electricians Mate to join our team . We have a wide geographical client base so if you re located in the Chesterfield/South Sheffield area we d like to hear from you. In this role, you will be tasked with assisting an experienced, fully qualified Electrical Test Engineer in carrying out inspection and testing of electrical installations. This role is ideal for candidates who have completed City & Guilds Level 2 in Electrical Installation and are looking to gain valuable hands-on experience in electrical testing and compliance work. The role will see you progress, with hard work and commitment, to becoming a fully fledged Electrical Test Engineer. What you receive for joining us: We re looking to offer a salary between £20,800 and £25,396.80 per annum. In addition, we offer a contributory pension scheme, company van, fuel card, uniform and tools you ll need to do the job and 25 days holiday per year plus Bank Holidays. Here s a look at some of the things you ll be doing: Assist the Test Engineer with setting up for electrical inspection and testing procedures (e.g., dead tests, live tests, insulation resistance), including the safe isolation of circuits and systems. Identify and label circuits, record test results, and help document findings and compile test certificates as required. Organise and transport test equipment, tools, and materials to and from job sites, including running temporary power leads and accessing/removing equipment for testing. Maintain a clean, safe, and compliant work area at all times, ensuring adherence to health and safety standards and electrical regulations on-site. Can you show experience in some of these areas: City & Guilds Level 2 in Electrical Installation (or equivalent), with a basic understanding of electrical inspection and testing principles. Strong attention to detail when working around live systems, along with good communication skills and the ability to follow instructions. Physically fit and capable of carrying tools, accessing control panels, distribution boards, and working in varied site conditions. ECS/CSCS card (preferred or willing to obtain), with a full UK driving licence and willingness to travel to multiple sites (preferred). Do you see yourself reflected in the description above? If so, we encourage you to submit your application today. Uncertain whether your skills align perfectly? Don't hesitate to apply regardless; we value candidates with diverse skill sets and will carefully consider all applicants. Introducing our organisation: Electrical Test Midlands: We collaborate with clients in sectors such as Education, Health, Care Homes, Public Sector, Local Authority, Industry, Pharmaceutical, Hospitality, Leisure, Food & Beverage, Retail, and Media, to ensure risk reduction, safety improvement, and regulatory compliance.
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control: Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title : Senior/Principal Naval Architect Location : Barrow-in-Furness, Bristol, Portsmouth or Frimley. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Conducting analysis and evaluation of submarine platforms manoeuvring performance from concept design to in-service support Undertaking development, verification and validation of mathematical manoeuvring model using physical model test data Generation of Safe Manoeuvring Envelopes and supporting associated operator guidance You will be working with enterprise partners to develop the modelling capability, processes and toolsets for use to support our major programmes Working collaboratively with other naval architecture teams, systems teams, Active Vehicle Control system teams and propulsion engineers as well as customers and suppliers to deliver innovative & safe submarine solutions Supporting & conducting hydrodynamic sea trials such as depth and heading control, including test form development and post-trial data analysis Your skills and experiences: Essential: Experience in the generation of ship or submarine manoeuvring modelling Advanced numeracy and analytical skills A strong understanding of hydrodynamic principles and methods Degree in Naval Architecture, Aeronautical Engineering, Mathematics, Physics or equivalent experience Desirable: Hydrodynamic/aerodynamic design and evaluation experience Physical testing experience Chartered Engineer or working towards/ability to achieve Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Vehicle Control team: As a Principal/Senior Naval Architect within the Vehicle Control team, you will be working alongside a team of experts within Naval Architecture and the Whole Boat Design Team in one of the largest and fastest growing Naval Architecture Departments in the UK. You will be working on some of the most complex ship design and build programmes ever undertaken to deliver cutting edge submarines to the Royal Navy and Royal Australian Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 04, 2025
Full time
Job Title : Senior/Principal Naval Architect Location : Barrow-in-Furness, Bristol, Portsmouth or Frimley. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive What you'll be doing: Conducting analysis and evaluation of submarine platforms manoeuvring performance from concept design to in-service support Undertaking development, verification and validation of mathematical manoeuvring model using physical model test data Generation of Safe Manoeuvring Envelopes and supporting associated operator guidance You will be working with enterprise partners to develop the modelling capability, processes and toolsets for use to support our major programmes Working collaboratively with other naval architecture teams, systems teams, Active Vehicle Control system teams and propulsion engineers as well as customers and suppliers to deliver innovative & safe submarine solutions Supporting & conducting hydrodynamic sea trials such as depth and heading control, including test form development and post-trial data analysis Your skills and experiences: Essential: Experience in the generation of ship or submarine manoeuvring modelling Advanced numeracy and analytical skills A strong understanding of hydrodynamic principles and methods Degree in Naval Architecture, Aeronautical Engineering, Mathematics, Physics or equivalent experience Desirable: Hydrodynamic/aerodynamic design and evaluation experience Physical testing experience Chartered Engineer or working towards/ability to achieve Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Vehicle Control team: As a Principal/Senior Naval Architect within the Vehicle Control team, you will be working alongside a team of experts within Naval Architecture and the Whole Boat Design Team in one of the largest and fastest growing Naval Architecture Departments in the UK. You will be working on some of the most complex ship design and build programmes ever undertaken to deliver cutting edge submarines to the Royal Navy and Royal Australian Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 30th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
The Liberty Recruitment Group is excited to be working in partnership with a leading Tech-enabled Analytics Consultancy based in London, who are looking for a Senior Backend Developer to join their award-winning Insurance division. As part of a mixed technical team including back-end developers, testers, front-end developers and actuarial data scientists, you d be working on their market-leading insurance application, used by some of the largest London Market and International insurers to assess over £200bn in reserves. Your key focus will be: Leading the design and development of new product features, providing a holistic approach to design Driving better integration between their C# and Python codebases, rewriting and restructuring code where needed to improve cohesion Address any performance bottlenecks and optimise performance of complex data workflows Championing best practice and guiding the junior team members What they re specifically looking for: C# development experience (.Net 8) with production-level proficiency Data engineering data-intensive application experience Python Azure PaaS / SaaS tools (eg. Azure Functions, App Services, Batch, Blob/Table/Queue Storage) Excellent problem-solving skills Why join them: It s an entrepreneurial environment pushing the boundaries, harnessing technology to enable more efficient analytics. A true people-first employer where you ll be supported to learn and develop your skills in a collaborative, innovative environment. Hybrid working (2 days a week in their London office), discretionary bonus, enhanced pension, private medical insurance, superb wellbeing services and much more
Sep 04, 2025
Full time
The Liberty Recruitment Group is excited to be working in partnership with a leading Tech-enabled Analytics Consultancy based in London, who are looking for a Senior Backend Developer to join their award-winning Insurance division. As part of a mixed technical team including back-end developers, testers, front-end developers and actuarial data scientists, you d be working on their market-leading insurance application, used by some of the largest London Market and International insurers to assess over £200bn in reserves. Your key focus will be: Leading the design and development of new product features, providing a holistic approach to design Driving better integration between their C# and Python codebases, rewriting and restructuring code where needed to improve cohesion Address any performance bottlenecks and optimise performance of complex data workflows Championing best practice and guiding the junior team members What they re specifically looking for: C# development experience (.Net 8) with production-level proficiency Data engineering data-intensive application experience Python Azure PaaS / SaaS tools (eg. Azure Functions, App Services, Batch, Blob/Table/Queue Storage) Excellent problem-solving skills Why join them: It s an entrepreneurial environment pushing the boundaries, harnessing technology to enable more efficient analytics. A true people-first employer where you ll be supported to learn and develop your skills in a collaborative, innovative environment. Hybrid working (2 days a week in their London office), discretionary bonus, enhanced pension, private medical insurance, superb wellbeing services and much more
Systems Engineering Consultant - Defence Location - Bristol Salary: £35K-£55K negotiable plus benefits, pension (7% contribution), 25 days holiday & life insurance As a Systems Engineering Consultant, you will be delivering analytical and systems engineering support to help our clients design systems, optimise solutions, and make better decisions. The Role Systems Engineering Consultant This will include working with clients to analyse their problems; capture requirements; create architectures; identify potential options; assess solutions using systems analysis methods; and make recommendations based on robust evidence. Projects will typically be in support of research and procurement activities in the defence and security sector but may include work in other sectors and government departments. Responsibilities will include: Delivering/ leading technical consulting projects. Using systems engineering to tackle real world problems, applying tools and techniques, and developing novel approaches where required. Applying and developing systems engineering methods, tools and techniques, including developing and applying novel approaches where required. Working organically in customer teams to deliver high quality systems engineering advice & artefacts. Building new relationships and maintaining current customer relationships. Assisting/ leading in identifying and winning work for a new and growing consultancy. About You The successful candidate must be able to demonstrate the following essential and desirable attributes: Essential Educated to degree level, or equivalent relevant experience. Ability to use and apply both soft and hard systems engineering techniques to support system design/ development, business decision making, policy development, and/or research. Development, application, and delivery of systems engineering methods, tools and artefacts. Knowledge and Understanding of the Systems Engineering Lifecycle. Building and maintaining client and stakeholder relationships. Authoring technical reports, developing systems engineering artefacts, and presenting to customers. Experience in one or more of the following systems engineering technical specialisms: Requirements elicitation and derivation Enterprise & System Architecting Verification & Validation/ Test & Evaluation System Integration Technology & Capability Roadmapping Capability/ Effects-based Engineering Option Analysis/ Solution trade-off studies Risk management and analysis Workshop design and facilitation Desirable Experience of using specialist Systems Engineering Software (e.g. Sparx EA) to develop SE Artefacts. Experience of delivering projects via MBSE. Experience of working in UK Defence or UK Government Departments utilising Systems Engineering. Membership of relevant professional institution and a desire for further professional development. Systems Engineering Consultant - Defence
Sep 04, 2025
Full time
Systems Engineering Consultant - Defence Location - Bristol Salary: £35K-£55K negotiable plus benefits, pension (7% contribution), 25 days holiday & life insurance As a Systems Engineering Consultant, you will be delivering analytical and systems engineering support to help our clients design systems, optimise solutions, and make better decisions. The Role Systems Engineering Consultant This will include working with clients to analyse their problems; capture requirements; create architectures; identify potential options; assess solutions using systems analysis methods; and make recommendations based on robust evidence. Projects will typically be in support of research and procurement activities in the defence and security sector but may include work in other sectors and government departments. Responsibilities will include: Delivering/ leading technical consulting projects. Using systems engineering to tackle real world problems, applying tools and techniques, and developing novel approaches where required. Applying and developing systems engineering methods, tools and techniques, including developing and applying novel approaches where required. Working organically in customer teams to deliver high quality systems engineering advice & artefacts. Building new relationships and maintaining current customer relationships. Assisting/ leading in identifying and winning work for a new and growing consultancy. About You The successful candidate must be able to demonstrate the following essential and desirable attributes: Essential Educated to degree level, or equivalent relevant experience. Ability to use and apply both soft and hard systems engineering techniques to support system design/ development, business decision making, policy development, and/or research. Development, application, and delivery of systems engineering methods, tools and artefacts. Knowledge and Understanding of the Systems Engineering Lifecycle. Building and maintaining client and stakeholder relationships. Authoring technical reports, developing systems engineering artefacts, and presenting to customers. Experience in one or more of the following systems engineering technical specialisms: Requirements elicitation and derivation Enterprise & System Architecting Verification & Validation/ Test & Evaluation System Integration Technology & Capability Roadmapping Capability/ Effects-based Engineering Option Analysis/ Solution trade-off studies Risk management and analysis Workshop design and facilitation Desirable Experience of using specialist Systems Engineering Software (e.g. Sparx EA) to develop SE Artefacts. Experience of delivering projects via MBSE. Experience of working in UK Defence or UK Government Departments utilising Systems Engineering. Membership of relevant professional institution and a desire for further professional development. Systems Engineering Consultant - Defence
Telesales Executive - Part-Time Location: Heckmondwike, WF16 Salary: 27,000 - 29,000 per annum (pro rata, dependent on experience) On-Target Earnings (OTE): Up to 35,000, based on appointment generation ( 10 per appointment, uncapped and with no threshold) Working Hours: Monday to Friday, 10am - 2:00pm Benefits: On-site parking Work Location: In-person A leading provider in the electrical inspection, testing, and installation industry is seeking an experienced Telesales Executive to support the development of a new department focused on appointment generation and lead sourcing. This is a key role in driving business growth and supporting our Business Development Manager (BDM) with high-quality leads. We are expanding rapidly, and this position offers genuine scope for career progression into a BDM role for the right candidate. Key Responsibilities: Generate qualified appointments through outbound calling Source and nurture leads for the Business Development Manager Engage with professionals such as maintenance teams, engineers, health & safety officers, facilities managers, and compliance personnel Maintain accurate records of customer interactions Meet and exceed performance targets Essential Skills and Attributes: Proven telesales experience (required) Confident and articulate communicator Patient and empathetic approach Positive attitude and self-motivation Strong focus and attention to detail Excellent interpersonal skills Team-oriented mindset Resilient and hard-working Friendly and professional manner If you are looking for a rewarding challenge and the opportunity to join one of the fastest-growing companies in the industry, we would be delighted to hear from you. Apply now to become part of a supportive and ambitious team. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Sep 04, 2025
Full time
Telesales Executive - Part-Time Location: Heckmondwike, WF16 Salary: 27,000 - 29,000 per annum (pro rata, dependent on experience) On-Target Earnings (OTE): Up to 35,000, based on appointment generation ( 10 per appointment, uncapped and with no threshold) Working Hours: Monday to Friday, 10am - 2:00pm Benefits: On-site parking Work Location: In-person A leading provider in the electrical inspection, testing, and installation industry is seeking an experienced Telesales Executive to support the development of a new department focused on appointment generation and lead sourcing. This is a key role in driving business growth and supporting our Business Development Manager (BDM) with high-quality leads. We are expanding rapidly, and this position offers genuine scope for career progression into a BDM role for the right candidate. Key Responsibilities: Generate qualified appointments through outbound calling Source and nurture leads for the Business Development Manager Engage with professionals such as maintenance teams, engineers, health & safety officers, facilities managers, and compliance personnel Maintain accurate records of customer interactions Meet and exceed performance targets Essential Skills and Attributes: Proven telesales experience (required) Confident and articulate communicator Patient and empathetic approach Positive attitude and self-motivation Strong focus and attention to detail Excellent interpersonal skills Team-oriented mindset Resilient and hard-working Friendly and professional manner If you are looking for a rewarding challenge and the opportunity to join one of the fastest-growing companies in the industry, we would be delighted to hear from you. Apply now to become part of a supportive and ambitious team. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
AI Applications Engineer Remote (Quarterly onsite) Full-time Permanent £50,000 - £60,000 + Benefits This is an opportunity to join a scaling AI consultancy firm looking to enhance their capabilities further across Data Science, GenAI and Machine Learning. You ll be focused on the vision, design, and deployment of high-impact AI solutions, while also working across a range of real-world use cases and getting hands-on with the integration into production environments. Role Overview You will work closely with cross-functional teams to deliver end-to-end AI solutions, from technical design and development to deployment and optimisation. Your work will involve integrating advanced AI models (including GenAI and reasoning-based models) into user-facing applications using modern full-stack technologies. Key Responsibilities Develop and deploy AI-powered features into production systems. Build and optimise automation pipelines for scalable delivery. Implement RAG (Retrieval-Augmented Generation) and reasoning models into customer-facing applications. Collaborate with data scientists and engineers to translate technical concepts into real-world tools. Build full-stack applications using the MERN stack and integrate Python-based AI services via APIs. Maintain clean, scalable, and testable code with attention to performance and reliability. Engage directly with clients to understand requirements, present technical solutions and support project delivery. Core Skills & Experience JavaScript/TypeScript, with experience in MERN Stack (MongoDB, Express.js, React.js, Node.js or similar ) Strong proficiency in Python, particularly for AI and ML applications. Hands-on experience with PyTorch, GenAI, and reasoning models. Experience implementing RAG architectures in production environments. Solid understanding of both SQL and NoSQL databases Experience building and consuming APIs; familiarity with CI/CD practices. Nice to Have Exposure to cloud platforms (AWS, GCP, Azure) Knowledge of automation tools (UIPath, Power Automate or similar ) Familiarity with automation pipelines and business workflows. If you're passionate about applying AI in real-world settings, enjoy the pace of a scale up environment and enjoy working across the stack to bring intelligent products to life, this could be an interesting role for you to explore.
Sep 04, 2025
Full time
AI Applications Engineer Remote (Quarterly onsite) Full-time Permanent £50,000 - £60,000 + Benefits This is an opportunity to join a scaling AI consultancy firm looking to enhance their capabilities further across Data Science, GenAI and Machine Learning. You ll be focused on the vision, design, and deployment of high-impact AI solutions, while also working across a range of real-world use cases and getting hands-on with the integration into production environments. Role Overview You will work closely with cross-functional teams to deliver end-to-end AI solutions, from technical design and development to deployment and optimisation. Your work will involve integrating advanced AI models (including GenAI and reasoning-based models) into user-facing applications using modern full-stack technologies. Key Responsibilities Develop and deploy AI-powered features into production systems. Build and optimise automation pipelines for scalable delivery. Implement RAG (Retrieval-Augmented Generation) and reasoning models into customer-facing applications. Collaborate with data scientists and engineers to translate technical concepts into real-world tools. Build full-stack applications using the MERN stack and integrate Python-based AI services via APIs. Maintain clean, scalable, and testable code with attention to performance and reliability. Engage directly with clients to understand requirements, present technical solutions and support project delivery. Core Skills & Experience JavaScript/TypeScript, with experience in MERN Stack (MongoDB, Express.js, React.js, Node.js or similar ) Strong proficiency in Python, particularly for AI and ML applications. Hands-on experience with PyTorch, GenAI, and reasoning models. Experience implementing RAG architectures in production environments. Solid understanding of both SQL and NoSQL databases Experience building and consuming APIs; familiarity with CI/CD practices. Nice to Have Exposure to cloud platforms (AWS, GCP, Azure) Knowledge of automation tools (UIPath, Power Automate or similar ) Familiarity with automation pipelines and business workflows. If you're passionate about applying AI in real-world settings, enjoy the pace of a scale up environment and enjoy working across the stack to bring intelligent products to life, this could be an interesting role for you to explore.
Job Title: Lighting Measurement Engineer Location: Crewe - Fully On-site Contract: Until 23/12/2025 (with scope to extend) Are you passionate about automotive lighting and photometry? Do you thrive in an innovative environment where your expertise can shine? Our client is seeking a dynamic Lighting Measurement Engineer to join their Exterior Lighting Team. This is an exciting opportunity to work on cutting-edge automotive lighting components! Main Purpose of the Job: As a Lighting Measurement Engineer, you will be responsible for measuring light sources in both vehicle and lab settings. Your role will involve producing detailed test reports on performance, maintaining dark room and light tunnel facilities, and ensuring calibration for all measurement equipment. Key Responsibilities: Measurement of Lighting Components: Conduct photometric measurements on all lighting components, both in-lab and in-vehicle. Report Generation: Create and compile comprehensive test summaries and detailed reports. Calibration Management: Maintain and plan equipment calibration and audits, ensuring accurate measurement capabilities. Facility Maintenance: Oversee the upkeep of dark room facilities, ensuring a safe and efficient working environment. Cross-Functional Collaboration: Work closely with feature owners, suppliers, and various internal departments to communicate measurement results and analyses. Position in organisation: You will be part of the innovative Exterior Lighting Team, reporting directly to the Technical Manager and collaborating with the Head of Exterior Lighting. Your role will involve high levels of communication across departments, ensuring seamless coordination and prioritisation of measurement processes. Qualifications & Experience: Education: Minimum HND in Electrical/Electronics; mechanical qualifications with relevant experience may also be considered. Technical Skills: Proficiency with photometric and optical measurement tools such as Goniometers, Spectrometers, and Imaging Colorimeters. Experience: Knowledge of measuring lamps, switch panels, and display illumination, including headlamps, tail lamps, interior lights, and ambient lighting. Technical Proficiency: Ability to read technical drawings, write clear reports, and understand electrical circuit diagrams and vehicle communication networks (CAN and LIN). Software Skills: Familiarity with Microsoft Office Suite (Word, PowerPoint, Excel) and experience in CAD environments. Additional Requirements: A proactive approach to collaboration and problem-solving. Commitment to local Health and Safety policies to ensure personal and team safety. Willingness to travel occasionally around UK. Please be advised if you haven't heard from us within 48 hours then unfortunately your application has not been successful on this occasion, we may however keep your details on file for any suitable future vacancies and contact you accordingly. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
Sep 04, 2025
Contractor
Job Title: Lighting Measurement Engineer Location: Crewe - Fully On-site Contract: Until 23/12/2025 (with scope to extend) Are you passionate about automotive lighting and photometry? Do you thrive in an innovative environment where your expertise can shine? Our client is seeking a dynamic Lighting Measurement Engineer to join their Exterior Lighting Team. This is an exciting opportunity to work on cutting-edge automotive lighting components! Main Purpose of the Job: As a Lighting Measurement Engineer, you will be responsible for measuring light sources in both vehicle and lab settings. Your role will involve producing detailed test reports on performance, maintaining dark room and light tunnel facilities, and ensuring calibration for all measurement equipment. Key Responsibilities: Measurement of Lighting Components: Conduct photometric measurements on all lighting components, both in-lab and in-vehicle. Report Generation: Create and compile comprehensive test summaries and detailed reports. Calibration Management: Maintain and plan equipment calibration and audits, ensuring accurate measurement capabilities. Facility Maintenance: Oversee the upkeep of dark room facilities, ensuring a safe and efficient working environment. Cross-Functional Collaboration: Work closely with feature owners, suppliers, and various internal departments to communicate measurement results and analyses. Position in organisation: You will be part of the innovative Exterior Lighting Team, reporting directly to the Technical Manager and collaborating with the Head of Exterior Lighting. Your role will involve high levels of communication across departments, ensuring seamless coordination and prioritisation of measurement processes. Qualifications & Experience: Education: Minimum HND in Electrical/Electronics; mechanical qualifications with relevant experience may also be considered. Technical Skills: Proficiency with photometric and optical measurement tools such as Goniometers, Spectrometers, and Imaging Colorimeters. Experience: Knowledge of measuring lamps, switch panels, and display illumination, including headlamps, tail lamps, interior lights, and ambient lighting. Technical Proficiency: Ability to read technical drawings, write clear reports, and understand electrical circuit diagrams and vehicle communication networks (CAN and LIN). Software Skills: Familiarity with Microsoft Office Suite (Word, PowerPoint, Excel) and experience in CAD environments. Additional Requirements: A proactive approach to collaboration and problem-solving. Commitment to local Health and Safety policies to ensure personal and team safety. Willingness to travel occasionally around UK. Please be advised if you haven't heard from us within 48 hours then unfortunately your application has not been successful on this occasion, we may however keep your details on file for any suitable future vacancies and contact you accordingly. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.
Job Title: NDE Co-ordinator Location: Oldham Salary: Competitive Oldham Engineering Limited is a well-established medium sized engineering business with a long history and exciting plans for business growth. We are looking to strengthen our team and appoint a NDE Co-ordinator based at our manufacturing sites in Oldham and Sheffield. The role of NDE Coordinator primarily involves undertaking non-destructive testing as well as organising, NDE activities, the successful candidate will be expected to inspect, interpret, evaluate and report in accordance with recommended practice, set procedures, national and international specifications and standards. The primary duties and responsibilities are listed as follows: Visual Inspection. Magnetic Inspection. Liquid Penetrant Inspection. Ultrasonic Inspection. Work to relevant procedures and specifications. Responsible for carrying out and recording daily, weekly, monthly validation checks. Responsible for the recording of results, with respect to interpreting, evaluation and providing a verdict on the results. Responsible for recording and reporting discrepancies, where necessary. Work under observation by clients and client appointed inspection personnel. Provide on-the-job training and guidance to Level I personnel as required. Occasional involvement in technical meetings with client's or client representatives to discuss and interpret NDE requirements. Writing non - / project specific practices procedures. Population of weld logs and NDE logs. Other ad-hoc duties as may be required from time to time to assist with the general operation of the facility. Skills Experience and Qualifications Operators shall be qualified as a minimum to the level of PCN/CSWIP Level II.: Magnetic Particle testing MT Liquid Penetrant Testing: PT Visual Inspection VT Ultrasonic Testing: 3.9 Weldments (Castings, Forgings & Wrought Products also desirable but not essential) The candidate must be competent in using a desktop computer and be fluent in the Microsoft Office suite of software to record, validate and issue appropriate inspection documents. Candidate Requirements The candidate must have the ability to work as part of a team, and on their own using their own initiative. Where required the operator will, as part of the team culture, develop the skill sets and flexibility required to provide continuous improvement and customer focus. The candidate must be flexible wherever possible to meet the company and customer requirements. The candidate must be able to communicate with customers, customers' representatives, external inspection authorities and with all levels of the organisation. As a Company we have a strong manufacturing capability and History, with over 160 years Manufacturing from the Oldham Site. The company has existing strong ties within our Sectors, supported by a strong Blue-Chip Client Base, and we look forward to developing our Team further. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; NDE Coordinator, NDE Technician, Quality Control Inspector, Non-Destructive Testing Technician, Weld Inspector, Quality Assurance, PCN Level II, CSWIP Level II also be considered for this role.
Sep 04, 2025
Full time
Job Title: NDE Co-ordinator Location: Oldham Salary: Competitive Oldham Engineering Limited is a well-established medium sized engineering business with a long history and exciting plans for business growth. We are looking to strengthen our team and appoint a NDE Co-ordinator based at our manufacturing sites in Oldham and Sheffield. The role of NDE Coordinator primarily involves undertaking non-destructive testing as well as organising, NDE activities, the successful candidate will be expected to inspect, interpret, evaluate and report in accordance with recommended practice, set procedures, national and international specifications and standards. The primary duties and responsibilities are listed as follows: Visual Inspection. Magnetic Inspection. Liquid Penetrant Inspection. Ultrasonic Inspection. Work to relevant procedures and specifications. Responsible for carrying out and recording daily, weekly, monthly validation checks. Responsible for the recording of results, with respect to interpreting, evaluation and providing a verdict on the results. Responsible for recording and reporting discrepancies, where necessary. Work under observation by clients and client appointed inspection personnel. Provide on-the-job training and guidance to Level I personnel as required. Occasional involvement in technical meetings with client's or client representatives to discuss and interpret NDE requirements. Writing non - / project specific practices procedures. Population of weld logs and NDE logs. Other ad-hoc duties as may be required from time to time to assist with the general operation of the facility. Skills Experience and Qualifications Operators shall be qualified as a minimum to the level of PCN/CSWIP Level II.: Magnetic Particle testing MT Liquid Penetrant Testing: PT Visual Inspection VT Ultrasonic Testing: 3.9 Weldments (Castings, Forgings & Wrought Products also desirable but not essential) The candidate must be competent in using a desktop computer and be fluent in the Microsoft Office suite of software to record, validate and issue appropriate inspection documents. Candidate Requirements The candidate must have the ability to work as part of a team, and on their own using their own initiative. Where required the operator will, as part of the team culture, develop the skill sets and flexibility required to provide continuous improvement and customer focus. The candidate must be flexible wherever possible to meet the company and customer requirements. The candidate must be able to communicate with customers, customers' representatives, external inspection authorities and with all levels of the organisation. As a Company we have a strong manufacturing capability and History, with over 160 years Manufacturing from the Oldham Site. The company has existing strong ties within our Sectors, supported by a strong Blue-Chip Client Base, and we look forward to developing our Team further. Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; NDE Coordinator, NDE Technician, Quality Control Inspector, Non-Destructive Testing Technician, Weld Inspector, Quality Assurance, PCN Level II, CSWIP Level II also be considered for this role.
Adecco is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Simulation Engineer Crewe Contract until 23/12/2025 (12 Month rolling contract) Day Rate Outside IR35 Purpose of the job Adecco working in partnership with Bentley Motors are seeking a Simulation Engineer to support engineers and feature owners, to create virtual models of vehicles and lighting components for simulation. Complete Analysis and reports of results and findings. Prepare demonstrations to show how the lighting in and around the vehicle will behave. Position in organisation Light Simulation Engineer part of the Light Simulation & Photometry Team EE/L, within Electrical Engineering Department. Reporting to the Technical Manager and the Head of Lighting. Scope of Job 1: Simulation Model Creation 2: Running and Analysing Simulations 3: Generation of Simulation Reports 4: Maintaining Materials library 5: Development of Simulation Techniques 6: Cross Functional Communication Key Responsibilities Customer Simulation Requirements Receipt and acknowledgement of Simulation request. Verification of customer requirements and Measurement Specifications. Management of customer requirements & Expectations and deadlines Communication / information sharing & packaging reviews with Research and developments teams, including Electrical, Concepts, Styling & Design, Trim, and other major interfaces Data preparation and Model Creation & Simulation Launch Preparation and cleaning of 3D data. Application of physically correct materials Creation of sensors & implementation of design tables Mesh adjustment Launching Simulations and use of HPC Use of active simulation for design Data Analysis, Report & Demonstration Compilation Detailed Analysis of Simulation Results, Including but not exhaustive Occupant Vision and Visual Ergonomics Lighting Concept strategy Interior Lighting (Internal reflections, Sunlight effects, core functional lighting, Ambient lighting, stowage lighting, Displays HUD, Cube simulations) Exterior Lighting (Front and rear lighting experience and performance. Impacts to customers and environment lit and unlit) Lighting effects Legal verification Vehicle benchmarking Root cause analysis of Errors and defects discovered Implications or impact introduced by the system / components into interfacing systems i.e. Interior Trim or BiW must be identified with potential solutions Identification of any packaging constraints & style hard points Scripting & Macro Creation Creation and Compilation of test summaries and of comprehensive & detailed test reports. Support Feature owners, Suppliers, and internal customers with understanding measurement results and analysis. Demonstration presentation of Simulation results Maintenance and Customer support Maintain material measurement library. Maintain process documentation for simulation methods/techniques Correlation of simulation results to real world situation Support customers understanding of simulation methods and techniques Experience Experience and knowledge of delivering complete vehicle optical simulation and vehicle integration of illuminated components with ergonomic eye point considerations on the interior & exterior of the vehicle. Excellent knowledge is required of: Catia v5, Softwares: Speos for Catia Ansys Speos AVX (awareness) Prita MS Office (including scripting in Visual basic) Detailed Analysis of simulation results Complete Vehicle component integration Good understanding of materials and behaviour with light Other Requirements Reading Technical Drawings. Ability to write clear technical reports Understanding of electrical circuit diagrams, behaviour and control of LEDs and system integration onto vehicles. Data management and revision control Appreciation of vehicle communication networks including CAN and LIN communication buses. Working to quality standards and processes Experience with Microsoft office programs including word, power point and excel Note - if you do not hear back within 5 working days of applying, please assume you have been unsuccessful on this occasion
Sep 04, 2025
Contractor
Adecco is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive. Simulation Engineer Crewe Contract until 23/12/2025 (12 Month rolling contract) Day Rate Outside IR35 Purpose of the job Adecco working in partnership with Bentley Motors are seeking a Simulation Engineer to support engineers and feature owners, to create virtual models of vehicles and lighting components for simulation. Complete Analysis and reports of results and findings. Prepare demonstrations to show how the lighting in and around the vehicle will behave. Position in organisation Light Simulation Engineer part of the Light Simulation & Photometry Team EE/L, within Electrical Engineering Department. Reporting to the Technical Manager and the Head of Lighting. Scope of Job 1: Simulation Model Creation 2: Running and Analysing Simulations 3: Generation of Simulation Reports 4: Maintaining Materials library 5: Development of Simulation Techniques 6: Cross Functional Communication Key Responsibilities Customer Simulation Requirements Receipt and acknowledgement of Simulation request. Verification of customer requirements and Measurement Specifications. Management of customer requirements & Expectations and deadlines Communication / information sharing & packaging reviews with Research and developments teams, including Electrical, Concepts, Styling & Design, Trim, and other major interfaces Data preparation and Model Creation & Simulation Launch Preparation and cleaning of 3D data. Application of physically correct materials Creation of sensors & implementation of design tables Mesh adjustment Launching Simulations and use of HPC Use of active simulation for design Data Analysis, Report & Demonstration Compilation Detailed Analysis of Simulation Results, Including but not exhaustive Occupant Vision and Visual Ergonomics Lighting Concept strategy Interior Lighting (Internal reflections, Sunlight effects, core functional lighting, Ambient lighting, stowage lighting, Displays HUD, Cube simulations) Exterior Lighting (Front and rear lighting experience and performance. Impacts to customers and environment lit and unlit) Lighting effects Legal verification Vehicle benchmarking Root cause analysis of Errors and defects discovered Implications or impact introduced by the system / components into interfacing systems i.e. Interior Trim or BiW must be identified with potential solutions Identification of any packaging constraints & style hard points Scripting & Macro Creation Creation and Compilation of test summaries and of comprehensive & detailed test reports. Support Feature owners, Suppliers, and internal customers with understanding measurement results and analysis. Demonstration presentation of Simulation results Maintenance and Customer support Maintain material measurement library. Maintain process documentation for simulation methods/techniques Correlation of simulation results to real world situation Support customers understanding of simulation methods and techniques Experience Experience and knowledge of delivering complete vehicle optical simulation and vehicle integration of illuminated components with ergonomic eye point considerations on the interior & exterior of the vehicle. Excellent knowledge is required of: Catia v5, Softwares: Speos for Catia Ansys Speos AVX (awareness) Prita MS Office (including scripting in Visual basic) Detailed Analysis of simulation results Complete Vehicle component integration Good understanding of materials and behaviour with light Other Requirements Reading Technical Drawings. Ability to write clear technical reports Understanding of electrical circuit diagrams, behaviour and control of LEDs and system integration onto vehicles. Data management and revision control Appreciation of vehicle communication networks including CAN and LIN communication buses. Working to quality standards and processes Experience with Microsoft office programs including word, power point and excel Note - if you do not hear back within 5 working days of applying, please assume you have been unsuccessful on this occasion
Boyd Recruitment are currently recruiting Data Engineers on behalf of our client for work in the Eastcoast of Scotland. The work will consist of installation of Fibre, Voice, and Data cabling across various environments, including Commercial, Government, Education, Healthcare, and Listed Buildings. Locations: Dundee - City Centre St Andrews Edinburgh - City Centre Pay Details: £20.00 per hour (37.5 hours per week) £26.66 per hour Overtime during the week £30.00 per hour Overtime on Saturday Key Responsibilities: Install, terminate, and test Category 6 and Category 6a structured cabling systems (shielded and unshielded) to manufacturer specifications. Test structured cabling systems using Fluke DSX network testers. Install, terminate, and test multimode and single-mode fibre cables, using fusion splicing and Fluke DSX Light Loss Fibre modules. Install and maintain voice cabling systems. Install communications cabinets (wall-mounted, floor-mounted, and flat-pack assemblies). Install various containment systems, including cable tray, basket tray, PVC/metal trunking, PVC conduit, and cable matting. Use Microsoft Outlook, Excel, Word, Fluke LinkWare & LinkWare Live software. Requirements: NVQ or SVQ in Structured Cabling / Telecommunications. ECS Grade Card. Customer-focused with a proactive approach. Start Date: Immediate Interested? If you would like to find out more about the role, please contact me on: Email (url removed) Text / Call - (phone number removed)
Sep 04, 2025
Contractor
Boyd Recruitment are currently recruiting Data Engineers on behalf of our client for work in the Eastcoast of Scotland. The work will consist of installation of Fibre, Voice, and Data cabling across various environments, including Commercial, Government, Education, Healthcare, and Listed Buildings. Locations: Dundee - City Centre St Andrews Edinburgh - City Centre Pay Details: £20.00 per hour (37.5 hours per week) £26.66 per hour Overtime during the week £30.00 per hour Overtime on Saturday Key Responsibilities: Install, terminate, and test Category 6 and Category 6a structured cabling systems (shielded and unshielded) to manufacturer specifications. Test structured cabling systems using Fluke DSX network testers. Install, terminate, and test multimode and single-mode fibre cables, using fusion splicing and Fluke DSX Light Loss Fibre modules. Install and maintain voice cabling systems. Install communications cabinets (wall-mounted, floor-mounted, and flat-pack assemblies). Install various containment systems, including cable tray, basket tray, PVC/metal trunking, PVC conduit, and cable matting. Use Microsoft Outlook, Excel, Word, Fluke LinkWare & LinkWare Live software. Requirements: NVQ or SVQ in Structured Cabling / Telecommunications. ECS Grade Card. Customer-focused with a proactive approach. Start Date: Immediate Interested? If you would like to find out more about the role, please contact me on: Email (url removed) Text / Call - (phone number removed)
Lead System Safety Engineer Location: Luton, mostly site based Rate: £65 p/h PAYE or £87.70 ph Umbrella Duration: 6 Months Inside IR35 SC Clearance required. Within Team Tempest, Leonardo UK is developing a suite of Integrated Sensor And Non-Kinetic Effects (ISANKE) and Integrated Communications Systems (ICS) subsystems this effort is being coordinated by, and delivered to, the Future Combat Air Sector within Leonardo UK as a cross-Line of Business (XLoB) activity. The subsystems within the ISANKE and ICS Technology Demonstrator Programme (TDP) suite are being designed to operate as an integrated part of an overall ISANKE and ICS system TDP within which the different subsystems will communicate and operate together. This functional integration will enable the demonstration of representative integrated sensing and communications technologies and capabilities. The ISANKE and ICS equipment will be physically integrated onto a donor platform to deliver a Flight Test Aircraft (FTA) for test, development and demonstration purposes. Key Responsibilities • Providing specialist safety advice to the SDA, to support their authorization of the Product safety, in accordance with Company processes • Ensuring that safety activities conducted on the Programme, within the scope of the TDP Systems, follow the plan described in the safety management plan and that the analysis is complete and correct. • Identifying and analysing intrinsic hazards, including mitigation to reduce the residual safety risks to an ALARP level for the ISANKE and ICS TDP system • Identifying and analysing functional hazards, including mitigation to reduce the residual safety risks to an ALARP level for the ISANKE and ICS TDP system • Eliciting ISANKE and ICS TDP safety requirements and flowing these down to the appropriate level • Reviewing individual TDP Subsystem System safety analysis and incorporating the outcomes in the integrated ISANKE and ICS analysis. • Review aircraft level safety analysis and ensure it aligns with ISANKE and ICS TDP Systems safety analysis • Documenting the integrated ISANKE and ICS TDP Systems safety assessment as described in the safety management plan. • Presenting a summary of the integrated ISANKE and ICS TDP Systems safety assessment at the ISANKE and ICS TDP Design Reviews. Key Skillset Essential: • Experience of safety analysis of complex systems in a safety-critical industry • Experience across a number of engineering lifecycle phases • Experience in leading and delivery a safety work package across multiple teams • Knowledge of working with a variety of internal and external stakeholders of varying seniorities Desirable: • Knowledge of ARP4754B, ARP4761A, RTCA DO-254, or DO-178C • Knowledge of design complexity and significant levels of uncertainty • Knowledge of lasers, radar systems, and/or sensors and defensive aids systems • Awareness of Information Security • Involvement in cross-industry safety initiatives, such as via the Institute of Engineering & Technology (IET) or Safety-Critical Systems Club (SCSC) • Cameo Systems Modeler • IBM DOORS • Adelard ASCE • Isograph Reliability Work Bench
Sep 04, 2025
Contractor
Lead System Safety Engineer Location: Luton, mostly site based Rate: £65 p/h PAYE or £87.70 ph Umbrella Duration: 6 Months Inside IR35 SC Clearance required. Within Team Tempest, Leonardo UK is developing a suite of Integrated Sensor And Non-Kinetic Effects (ISANKE) and Integrated Communications Systems (ICS) subsystems this effort is being coordinated by, and delivered to, the Future Combat Air Sector within Leonardo UK as a cross-Line of Business (XLoB) activity. The subsystems within the ISANKE and ICS Technology Demonstrator Programme (TDP) suite are being designed to operate as an integrated part of an overall ISANKE and ICS system TDP within which the different subsystems will communicate and operate together. This functional integration will enable the demonstration of representative integrated sensing and communications technologies and capabilities. The ISANKE and ICS equipment will be physically integrated onto a donor platform to deliver a Flight Test Aircraft (FTA) for test, development and demonstration purposes. Key Responsibilities • Providing specialist safety advice to the SDA, to support their authorization of the Product safety, in accordance with Company processes • Ensuring that safety activities conducted on the Programme, within the scope of the TDP Systems, follow the plan described in the safety management plan and that the analysis is complete and correct. • Identifying and analysing intrinsic hazards, including mitigation to reduce the residual safety risks to an ALARP level for the ISANKE and ICS TDP system • Identifying and analysing functional hazards, including mitigation to reduce the residual safety risks to an ALARP level for the ISANKE and ICS TDP system • Eliciting ISANKE and ICS TDP safety requirements and flowing these down to the appropriate level • Reviewing individual TDP Subsystem System safety analysis and incorporating the outcomes in the integrated ISANKE and ICS analysis. • Review aircraft level safety analysis and ensure it aligns with ISANKE and ICS TDP Systems safety analysis • Documenting the integrated ISANKE and ICS TDP Systems safety assessment as described in the safety management plan. • Presenting a summary of the integrated ISANKE and ICS TDP Systems safety assessment at the ISANKE and ICS TDP Design Reviews. Key Skillset Essential: • Experience of safety analysis of complex systems in a safety-critical industry • Experience across a number of engineering lifecycle phases • Experience in leading and delivery a safety work package across multiple teams • Knowledge of working with a variety of internal and external stakeholders of varying seniorities Desirable: • Knowledge of ARP4754B, ARP4761A, RTCA DO-254, or DO-178C • Knowledge of design complexity and significant levels of uncertainty • Knowledge of lasers, radar systems, and/or sensors and defensive aids systems • Awareness of Information Security • Involvement in cross-industry safety initiatives, such as via the Institute of Engineering & Technology (IET) or Safety-Critical Systems Club (SCSC) • Cameo Systems Modeler • IBM DOORS • Adelard ASCE • Isograph Reliability Work Bench
