We have multiple clients looking for Duct Fitters The successful candidate will be responsible for the installation, fitting, and maintenance of ductwork systems to support heating, ventilation, and air conditioning (HVAC) projects. This role will involve working on a variety of sites, ensuring all ducting systems are fitted to a high standard, in line with specifications, drawings, and health & safety regulations. Key Responsibilities Install, assemble, and secure ductwork systems in line with technical drawings and specifications. Carry out both rectangular and spiral duct fitting, including associated components such as grilles, diffusers, dampers, and supports. Measure, cut, and shape ducting materials on-site where required. Work with other trades (e.g., electricians, plumbers, HVAC engineers) to ensure smooth project delivery. Maintain tools, equipment, and materials in good working order. Comply with site safety procedures, risk assessments, and method statements at all times. Report progress, issues, and completed work to site supervisors or project managers. Essential Skills & Qualifications Proven experience as a Duct Fitter in commercial or industrial projects. Ability to read and interpret technical drawings and specifications. Good understanding of health and safety requirements on-site. Practical skills with sheet metal, insulation, and fixings. CSCS card (essential). Desirable Skills IPAF or PASMA certification for working at height. NVQ/SVQ qualification in Ductwork Installation or equivalent. Experience working on large commercial or industrial HVAC projects. Knowledge of fire-rated ductwork systems and installation methods.
Sep 06, 2025
Contractor
We have multiple clients looking for Duct Fitters The successful candidate will be responsible for the installation, fitting, and maintenance of ductwork systems to support heating, ventilation, and air conditioning (HVAC) projects. This role will involve working on a variety of sites, ensuring all ducting systems are fitted to a high standard, in line with specifications, drawings, and health & safety regulations. Key Responsibilities Install, assemble, and secure ductwork systems in line with technical drawings and specifications. Carry out both rectangular and spiral duct fitting, including associated components such as grilles, diffusers, dampers, and supports. Measure, cut, and shape ducting materials on-site where required. Work with other trades (e.g., electricians, plumbers, HVAC engineers) to ensure smooth project delivery. Maintain tools, equipment, and materials in good working order. Comply with site safety procedures, risk assessments, and method statements at all times. Report progress, issues, and completed work to site supervisors or project managers. Essential Skills & Qualifications Proven experience as a Duct Fitter in commercial or industrial projects. Ability to read and interpret technical drawings and specifications. Good understanding of health and safety requirements on-site. Practical skills with sheet metal, insulation, and fixings. CSCS card (essential). Desirable Skills IPAF or PASMA certification for working at height. NVQ/SVQ qualification in Ductwork Installation or equivalent. Experience working on large commercial or industrial HVAC projects. Knowledge of fire-rated ductwork systems and installation methods.
Position Service Engineer - Commercial Air Conditioning & Chillers Company Large National M&E provider with a national team of AC / HVAC / Chiller / Refrigeration Service Engineers Location West Midlands Benefits Up to £52k base, 40hrs + overtime if desired, choice of car or van avaiable, up to 14% pension contribution (depends on time served), up to 27 days + bank holidays, private health and medical. Industry Commercial HVAC / Air conditioning / AC A/C / Refrigeration and Air Conditioning / Chillers / Water Cooled Chillers / Air Cooled Chillers / Chilled Water Desired Experience Air conditioning and/or Chiller service and maintenance engineer, fault find and fix, PPM's. The Role A leading national mechanical engineering provider seeks an experienced HVAC Service and Maintenance Engineer to add to their Air Conditioning and Refrigeration Service Team. You will be focused on South East commercial planned preventive maintenance contracts and emergency fault find and fix call outs on large commercial HVAC VRF / VRV air conditioning systems and chillers from the main HVAC, air conditioning and chiller manufacturers. Experience Required You will have extensive previous hands-on experience servicing HVAC systems. Ideally you will be highly capable at fault find and fix. F-Gas 2079, hydrocarbons, refrigeration and air conditioning qualifications / certifications and manufacturer training would be an advantage especially NVQ level 2 or level 3. Great teamwork and communication skills are also important both from a client facing perspective and internal regional team cooperation to service contracts and resolve fault find and fix call outs both quickly and effectively. If you have worked your way up on the tools as an apprentice and are highly knowledgeable with or without Level 2 or Level 3 AC and refrigeration certifications then please still apply. The Company This is a long-established company that prides itself on having excellent company morale and career development. The company is one of the largest M&E service providers nationally and due to growth of the companies national contracts they are looking to add to their South East team. Their air conditioning and Chiller Engineers all have extensive and advanced knowledge on servicing large commercial HVAC systems from the top air conditioning and chiller manufacturers and their Service Engineers are highly skilled at advanced fault finding and fixing. The Package Initial indications are a yearly remuneration package from £45,000 to £52,000 for 40 hrs per week, overtime a company van or a car will be provided along with up to 14% pension contribution, private healthcare and dental. Furthermore, 27 days holiday + bank holidays. Jamieson Clark currently has over 50 live roles to offer and specialise in sales recruitment. Current vacancies for HVAC Service Engineers, Air Conditioning Service Engineers, HVAC Install Engineers, Air Conditioning Service Engineers, Product Managers, Contract Engineers, Pre-Sales Technical Engineers, Sales Engineers, Sales Executives, Business Development Managers and Sales Managers providing air conditioning systems, central plant, fan coils, HVAC, heat recovery, heat exchangers, split systems, ducted, cassette, ceiling suspended, wall mounted, variable refrigerant flow, VRF, VRV, DX, Refrigeration, AHU s, Air Handling Units, close control, Chillers, BMS, water cooled air conditioning units and other product & service based sectors. Send your CV to a consultant for advice on your next career move.
Sep 06, 2025
Full time
Position Service Engineer - Commercial Air Conditioning & Chillers Company Large National M&E provider with a national team of AC / HVAC / Chiller / Refrigeration Service Engineers Location West Midlands Benefits Up to £52k base, 40hrs + overtime if desired, choice of car or van avaiable, up to 14% pension contribution (depends on time served), up to 27 days + bank holidays, private health and medical. Industry Commercial HVAC / Air conditioning / AC A/C / Refrigeration and Air Conditioning / Chillers / Water Cooled Chillers / Air Cooled Chillers / Chilled Water Desired Experience Air conditioning and/or Chiller service and maintenance engineer, fault find and fix, PPM's. The Role A leading national mechanical engineering provider seeks an experienced HVAC Service and Maintenance Engineer to add to their Air Conditioning and Refrigeration Service Team. You will be focused on South East commercial planned preventive maintenance contracts and emergency fault find and fix call outs on large commercial HVAC VRF / VRV air conditioning systems and chillers from the main HVAC, air conditioning and chiller manufacturers. Experience Required You will have extensive previous hands-on experience servicing HVAC systems. Ideally you will be highly capable at fault find and fix. F-Gas 2079, hydrocarbons, refrigeration and air conditioning qualifications / certifications and manufacturer training would be an advantage especially NVQ level 2 or level 3. Great teamwork and communication skills are also important both from a client facing perspective and internal regional team cooperation to service contracts and resolve fault find and fix call outs both quickly and effectively. If you have worked your way up on the tools as an apprentice and are highly knowledgeable with or without Level 2 or Level 3 AC and refrigeration certifications then please still apply. The Company This is a long-established company that prides itself on having excellent company morale and career development. The company is one of the largest M&E service providers nationally and due to growth of the companies national contracts they are looking to add to their South East team. Their air conditioning and Chiller Engineers all have extensive and advanced knowledge on servicing large commercial HVAC systems from the top air conditioning and chiller manufacturers and their Service Engineers are highly skilled at advanced fault finding and fixing. The Package Initial indications are a yearly remuneration package from £45,000 to £52,000 for 40 hrs per week, overtime a company van or a car will be provided along with up to 14% pension contribution, private healthcare and dental. Furthermore, 27 days holiday + bank holidays. Jamieson Clark currently has over 50 live roles to offer and specialise in sales recruitment. Current vacancies for HVAC Service Engineers, Air Conditioning Service Engineers, HVAC Install Engineers, Air Conditioning Service Engineers, Product Managers, Contract Engineers, Pre-Sales Technical Engineers, Sales Engineers, Sales Executives, Business Development Managers and Sales Managers providing air conditioning systems, central plant, fan coils, HVAC, heat recovery, heat exchangers, split systems, ducted, cassette, ceiling suspended, wall mounted, variable refrigerant flow, VRF, VRV, DX, Refrigeration, AHU s, Air Handling Units, close control, Chillers, BMS, water cooled air conditioning units and other product & service based sectors. Send your CV to a consultant for advice on your next career move.
We have multiple clients seeking Thermal Engineers. The successful candidate will be responsible for designing, analysing, and testing thermal systems to ensure performance, efficiency, and compliance with industry standards. You will contribute to projects involving heating, cooling, and energy management solutions across a range of applications, ensuring optimal thermal performance and sustainability. Key Responsibilities Conduct thermal analysis and modelling of systems, components, and environments. Design and optimise thermal management solutions for heating, ventilation, air conditioning (HVAC), and/or specialist equipment. Carry out simulations using relevant software (e.g., ANSYS, CFD tools, MATLAB). Support prototype development and perform thermal testing to validate designs. Provide technical input on material selection, insulation, and cooling technologies. Work closely with multidisciplinary teams including mechanical, electrical, and energy engineers. Ensure compliance with industry standards, safety guidelines, and environmental regulations. Prepare detailed technical documentation, test reports, and recommendations. Essential Skills & Qualifications Degree (BEng/MEng) in Mechanical Engineering, Thermal Engineering, Energy Engineering, or related field. Strong understanding of heat transfer, thermodynamics, and fluid dynamics. Experience with thermal modelling and simulation software (e.g., ANSYS, FloTHERM, COMSOL). Practical experience in testing and validating thermal systems. Strong analytical and problem-solving skills with excellent attention to detail. Ability to communicate technical concepts clearly to both technical and non-technical stakeholders. Desirable Skills Experience in HVAC, renewable energy, or advanced manufacturing sectors. Familiarity with energy efficiency and sustainability standards (e.g., Part L, ASHRAE, CIBSE). Knowledge of electronics cooling or battery thermal management (for automotive/aerospace applications).
Sep 06, 2025
Contractor
We have multiple clients seeking Thermal Engineers. The successful candidate will be responsible for designing, analysing, and testing thermal systems to ensure performance, efficiency, and compliance with industry standards. You will contribute to projects involving heating, cooling, and energy management solutions across a range of applications, ensuring optimal thermal performance and sustainability. Key Responsibilities Conduct thermal analysis and modelling of systems, components, and environments. Design and optimise thermal management solutions for heating, ventilation, air conditioning (HVAC), and/or specialist equipment. Carry out simulations using relevant software (e.g., ANSYS, CFD tools, MATLAB). Support prototype development and perform thermal testing to validate designs. Provide technical input on material selection, insulation, and cooling technologies. Work closely with multidisciplinary teams including mechanical, electrical, and energy engineers. Ensure compliance with industry standards, safety guidelines, and environmental regulations. Prepare detailed technical documentation, test reports, and recommendations. Essential Skills & Qualifications Degree (BEng/MEng) in Mechanical Engineering, Thermal Engineering, Energy Engineering, or related field. Strong understanding of heat transfer, thermodynamics, and fluid dynamics. Experience with thermal modelling and simulation software (e.g., ANSYS, FloTHERM, COMSOL). Practical experience in testing and validating thermal systems. Strong analytical and problem-solving skills with excellent attention to detail. Ability to communicate technical concepts clearly to both technical and non-technical stakeholders. Desirable Skills Experience in HVAC, renewable energy, or advanced manufacturing sectors. Familiarity with energy efficiency and sustainability standards (e.g., Part L, ASHRAE, CIBSE). Knowledge of electronics cooling or battery thermal management (for automotive/aerospace applications).
Job Description: SECURITY CLEARANCE: You will be subject to a BPSS check (including a criminal record check) TRAVEL REQUIRED: Occasional travel within UK LOCATION: Broughton WHAT'S IN IT FOR YOU Financial Reward: Competitive salary, annual profit share, contributory pension, share options, car leasing scheme, free onsite parking, season ticket loan, tax-free technology scheme, shopping discounts and much more Work / Life Balance: 35 hour week, This may include Days, Double-days and Nightshift. Due to site ramp up there are currently multiple positions available across these shifts with differing shift premiums, flexible working, option to buy/sell holiday Personal Development: Personalised development plan, Airbus Leadership University and unlimited access to 10,000+ E-learning courses, internal mobility including international opportunities Health & Wellbeing: Bupa health insurance, wellbeing benefits (including 24/7 online GP and mental health support), discounted family health / dental insurance / eye tests, cycle-to-work scheme, on-site canteen and coffee shop, lunchtime yoga / meditation Family and Caregiving: Life assurance, enhanced pay for maternity, paternity, adoption and shared parental leave and caregiving Our world is changing. And so are we. From our commitment to zero-carbon flight () to cleaning up space, sustainability is at the heart of our purpose. So what's your next change? About the Role We are seeking an experienced Technical Services Mechanical Engineer to take responsibility for ensuring the Contract Management and delivery of the Mechanical element of the technical services delivery for Facilities Management at Broughton. The role will involve liaising with the service provider and lead local mechanical SQCDP's, trend analysis reviews, continuous improvement reviews, health and safety reviews and ensure the delivery of a green KPI month on month for mechanical activities. A high emphasis on strategic planning is essential for this role as you will be responsible for the 5 year rolling maintenance strategy and CAPEX investments. This will be carried out by data driven decisions using SQCDP, trend analysis, continuous improvements, the manufacturing business requirements, H&S tools and the CAFM system. How you will contribute to the Team Track all risks identified on the Active Risk Management (ARM) tool. Carry out process confirmations that tasks are being carried out to relevant safety and quality standards and take action on any findings. You will be the UK & transnational representative for Fire suppression and gas systems Be the Broughton FMRE Site interface for the Company Insurance and Risk Insurers and provide cover across other sites and divisions on the issue of Impairment notices Operate, monitor, and maintain all site Mechanical fire suppression systems (water-based and gaseous), ensuring continuous compliance with relevant standards and regulations Perform and oversee regular inspections, testing, and maintenance activities, ensuring adherence to manufacturer guidelines and regulatory requirements Maintain accurate documentation of testing, certifications, incidents, and corrective actions to ensure compliance with EH&S, NFPA, OSHA, and AHJ requirements. Support emergency response planning and execution, participate in drills, and act as the technical lead during fire-related incidents. Contribute to the design, review, and implementation of fire protection system upgrades, retrofits, and new installations. Conduct fire risk assessments and lead investigations into system faults, performing root cause analysis and corrective actions. Deliver fire system training, collaborate with cross-functional teams, and promote a culture of safety and system reliability. About You Degree in Mechanical Engineering or related field.-Preferred: Specialization or coursework in fire protection or HVAC systems. 3-7 years in facilities engineering or mechanical systems with a focus on fire suppression. Hands-on experience in: Water-based fire systems (wet, dry, pre-action), Gaseous suppression (FM-200, NOVEC 1230), Fire pumps and control systems Experience maintaining infrastructure in industrial, data centre, hospital, or manufacturing environments. Familiarity with: BMS/BAS (Building Management/Automation Systems) / Maintenance planning tools (e.g., CMMS)/Emergency response procedures NFPA Training or Certification (e.g., NFPA 13, 25, 72, 2001) Registered/Chartered Engineer (PE, CEng, or equivalent / optional but valued)Fire Protection Engineering Certification (e.g., NICET Level II/III in Fire Protection) OSHA or equivalent safety training Strong knowledge of fire codes and standards (NFPA, ASHRAE, local AHJ) Mechanical systems understanding (pumps, valves, pipe networks) System troubleshooting and diagnostics Project management and contractor coordination Root cause analysis and preventive maintenance planning HOW WE CAN SUPPORT YOU Many of our staff work flexibly in many different ways, including part-time. Please talk to us at interview about the flexibility you need and we will always do our best to accommodate your request. Please let us know if you need us to make any adjustments for the selection process - you can share this with your Talent Acquisition Partner if you are invited to interview. Examples may include (but not exclusive to) accessible facilities; auxiliary aids; room layout, etc. Any information disclosed will be treated in the strictest confidence. As a Disability Confident Employer, Airbus UK will offer an interview to any applicant that considers themselves to have a disability or long-term condition and meets the minimum criteria of the role (as set out in the job advert). To opt in, just select the option during your application submission and our Talent Acquisition team will contact you. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company s success, reputation and sustainable growth. Company: Airbus Operations Limited Employment Type: Permanent - Experience Level: Professional Job Family: Facility Management and Real Estate By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
Sep 06, 2025
Full time
Job Description: SECURITY CLEARANCE: You will be subject to a BPSS check (including a criminal record check) TRAVEL REQUIRED: Occasional travel within UK LOCATION: Broughton WHAT'S IN IT FOR YOU Financial Reward: Competitive salary, annual profit share, contributory pension, share options, car leasing scheme, free onsite parking, season ticket loan, tax-free technology scheme, shopping discounts and much more Work / Life Balance: 35 hour week, This may include Days, Double-days and Nightshift. Due to site ramp up there are currently multiple positions available across these shifts with differing shift premiums, flexible working, option to buy/sell holiday Personal Development: Personalised development plan, Airbus Leadership University and unlimited access to 10,000+ E-learning courses, internal mobility including international opportunities Health & Wellbeing: Bupa health insurance, wellbeing benefits (including 24/7 online GP and mental health support), discounted family health / dental insurance / eye tests, cycle-to-work scheme, on-site canteen and coffee shop, lunchtime yoga / meditation Family and Caregiving: Life assurance, enhanced pay for maternity, paternity, adoption and shared parental leave and caregiving Our world is changing. And so are we. From our commitment to zero-carbon flight () to cleaning up space, sustainability is at the heart of our purpose. So what's your next change? About the Role We are seeking an experienced Technical Services Mechanical Engineer to take responsibility for ensuring the Contract Management and delivery of the Mechanical element of the technical services delivery for Facilities Management at Broughton. The role will involve liaising with the service provider and lead local mechanical SQCDP's, trend analysis reviews, continuous improvement reviews, health and safety reviews and ensure the delivery of a green KPI month on month for mechanical activities. A high emphasis on strategic planning is essential for this role as you will be responsible for the 5 year rolling maintenance strategy and CAPEX investments. This will be carried out by data driven decisions using SQCDP, trend analysis, continuous improvements, the manufacturing business requirements, H&S tools and the CAFM system. How you will contribute to the Team Track all risks identified on the Active Risk Management (ARM) tool. Carry out process confirmations that tasks are being carried out to relevant safety and quality standards and take action on any findings. You will be the UK & transnational representative for Fire suppression and gas systems Be the Broughton FMRE Site interface for the Company Insurance and Risk Insurers and provide cover across other sites and divisions on the issue of Impairment notices Operate, monitor, and maintain all site Mechanical fire suppression systems (water-based and gaseous), ensuring continuous compliance with relevant standards and regulations Perform and oversee regular inspections, testing, and maintenance activities, ensuring adherence to manufacturer guidelines and regulatory requirements Maintain accurate documentation of testing, certifications, incidents, and corrective actions to ensure compliance with EH&S, NFPA, OSHA, and AHJ requirements. Support emergency response planning and execution, participate in drills, and act as the technical lead during fire-related incidents. Contribute to the design, review, and implementation of fire protection system upgrades, retrofits, and new installations. Conduct fire risk assessments and lead investigations into system faults, performing root cause analysis and corrective actions. Deliver fire system training, collaborate with cross-functional teams, and promote a culture of safety and system reliability. About You Degree in Mechanical Engineering or related field.-Preferred: Specialization or coursework in fire protection or HVAC systems. 3-7 years in facilities engineering or mechanical systems with a focus on fire suppression. Hands-on experience in: Water-based fire systems (wet, dry, pre-action), Gaseous suppression (FM-200, NOVEC 1230), Fire pumps and control systems Experience maintaining infrastructure in industrial, data centre, hospital, or manufacturing environments. Familiarity with: BMS/BAS (Building Management/Automation Systems) / Maintenance planning tools (e.g., CMMS)/Emergency response procedures NFPA Training or Certification (e.g., NFPA 13, 25, 72, 2001) Registered/Chartered Engineer (PE, CEng, or equivalent / optional but valued)Fire Protection Engineering Certification (e.g., NICET Level II/III in Fire Protection) OSHA or equivalent safety training Strong knowledge of fire codes and standards (NFPA, ASHRAE, local AHJ) Mechanical systems understanding (pumps, valves, pipe networks) System troubleshooting and diagnostics Project management and contractor coordination Root cause analysis and preventive maintenance planning HOW WE CAN SUPPORT YOU Many of our staff work flexibly in many different ways, including part-time. Please talk to us at interview about the flexibility you need and we will always do our best to accommodate your request. Please let us know if you need us to make any adjustments for the selection process - you can share this with your Talent Acquisition Partner if you are invited to interview. Examples may include (but not exclusive to) accessible facilities; auxiliary aids; room layout, etc. Any information disclosed will be treated in the strictest confidence. As a Disability Confident Employer, Airbus UK will offer an interview to any applicant that considers themselves to have a disability or long-term condition and meets the minimum criteria of the role (as set out in the job advert). To opt in, just select the option during your application submission and our Talent Acquisition team will contact you. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company s success, reputation and sustainable growth. Company: Airbus Operations Limited Employment Type: Permanent - Experience Level: Professional Job Family: Facility Management and Real Estate By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
Our client are seeking a skilled and reliable Air Conditioning Engineer to join their growing team. The successful candidate will be responsible for the installation, maintenance, servicing, and repair of a wide range of air conditioning systems across residential, commercial, and industrial environments. You will play a key role in ensuring that clients receive a high-quality service with systems running efficiently, safely, and in compliance with industry standards. Key Responsibilities Install, service, and repair air conditioning systems, including split, multi-split, VRV/VRF, and packaged systems. Carry out planned preventative maintenance (PPM) and respond to reactive maintenance calls. Diagnose faults and implement effective solutions to restore system performance. Complete F-Gas leak testing, pressure testing, evacuation, and refrigerant charging as required. Ensure all works comply with current health and safety regulations and F-Gas legislation. Provide clear service reports and communicate effectively with customers on work carried out. Assist with project planning and support wider engineering teams where required. Essential Skills & Qualifications NVQ Level 2 or 3 in Air Conditioning & Refrigeration (or equivalent). F-Gas 2079 Category 1 certification (essential). Proven experience in air conditioning installation, servicing, and fault-finding. Strong knowledge of electrical systems relevant to A/C units. Good problem-solving skills with a proactive, customer-focused attitude. Full UK driving licence. Desirable Skills Experience with VRV/VRF systems and larger-scale commercial installations. Knowledge of ventilation and heating systems (HVAC). IPAF or PASMA certification. CSCS/ECS card.
Sep 06, 2025
Full time
Our client are seeking a skilled and reliable Air Conditioning Engineer to join their growing team. The successful candidate will be responsible for the installation, maintenance, servicing, and repair of a wide range of air conditioning systems across residential, commercial, and industrial environments. You will play a key role in ensuring that clients receive a high-quality service with systems running efficiently, safely, and in compliance with industry standards. Key Responsibilities Install, service, and repair air conditioning systems, including split, multi-split, VRV/VRF, and packaged systems. Carry out planned preventative maintenance (PPM) and respond to reactive maintenance calls. Diagnose faults and implement effective solutions to restore system performance. Complete F-Gas leak testing, pressure testing, evacuation, and refrigerant charging as required. Ensure all works comply with current health and safety regulations and F-Gas legislation. Provide clear service reports and communicate effectively with customers on work carried out. Assist with project planning and support wider engineering teams where required. Essential Skills & Qualifications NVQ Level 2 or 3 in Air Conditioning & Refrigeration (or equivalent). F-Gas 2079 Category 1 certification (essential). Proven experience in air conditioning installation, servicing, and fault-finding. Strong knowledge of electrical systems relevant to A/C units. Good problem-solving skills with a proactive, customer-focused attitude. Full UK driving licence. Desirable Skills Experience with VRV/VRF systems and larger-scale commercial installations. Knowledge of ventilation and heating systems (HVAC). IPAF or PASMA certification. CSCS/ECS card.
Position Service Engineer - Commercial Air Conditioning & Chillers Company Large National M&E provider with a national team of AC / HVAC / Chiller / Refrigeration Service Engineers Location South Midlands Benefits Up to £52k base, 40hrs + overtime if desired, choice of car or van avaiable, up to 14% pension contribution (depends on time served), up to 27 days + bank holidays, private health and medical. Industry Commercial HVAC / Air conditioning / AC A/C / Refrigeration and Air Conditioning / Chillers / Water Cooled Chillers / Air Cooled Chillers / Chilled Water Desired Experience Air conditioning and/or Chiller service and maintenance engineer, fault find and fix, PPM's. The Role A leading national mechanical engineering provider seeks an experienced HVAC Service and Maintenance Engineer to add to their Air Conditioning and Refrigeration Service Team. You will be focused on South East commercial planned preventive maintenance contracts and emergency fault find and fix call outs on large commercial HVAC VRF / VRV air conditioning systems and chillers from the main HVAC, air conditioning and chiller manufacturers. Experience Required You will have extensive previous hands-on experience servicing HVAC systems. Ideally you will be highly capable at fault find and fix. F-Gas 2079, hydrocarbons, refrigeration and air conditioning qualifications / certifications and manufacturer training would be an advantage especially NVQ level 2 or level 3. Great teamwork and communication skills are also important both from a client facing perspective and internal regional team cooperation to service contracts and resolve fault find and fix call outs both quickly and effectively. If you have worked your way up on the tools as an apprentice and are highly knowledgeable with or without Level 2 or Level 3 AC and refrigeration certifications then please still apply. The Company This is a long-established company that prides itself on having excellent company morale and career development. The company is one of the largest M&E service providers nationally and due to growth of the companies national contracts they are looking to add to their South East team. Their air conditioning and Chiller Engineers all have extensive and advanced knowledge on servicing large commercial HVAC systems from the top air conditioning and chiller manufacturers and their Service Engineers are highly skilled at advanced fault finding and fixing. The Package Initial indications are a yearly remuneration package from £42,000 to £52,000 for 40 hrs per week, overtime a company van or a car will be provided along with up to 14% pension contribution, private healthcare and dental. Furthermore, 27 days holiday + bank holidays. Jamieson Clark currently has over 50 live roles to offer and specialise in sales recruitment. Current vacancies for HVAC Service Engineers, Air Conditioning Service Engineers, HVAC Install Engineers, Air Conditioning Service Engineers, Product Managers, Contract Engineers, Pre-Sales Technical Engineers, Sales Engineers, Sales Executives, Business Development Managers and Sales Managers providing air conditioning systems, central plant, fan coils, HVAC, heat recovery, heat exchangers, split systems, ducted, cassette, ceiling suspended, wall mounted, variable refrigerant flow, VRF, VRV, DX, Refrigeration, AHU s, Air Handling Units, close control, Chillers, BMS, water cooled air conditioning units and other product & service based sectors. Send your CV to a consultant for advice on your next career move.
Sep 06, 2025
Full time
Position Service Engineer - Commercial Air Conditioning & Chillers Company Large National M&E provider with a national team of AC / HVAC / Chiller / Refrigeration Service Engineers Location South Midlands Benefits Up to £52k base, 40hrs + overtime if desired, choice of car or van avaiable, up to 14% pension contribution (depends on time served), up to 27 days + bank holidays, private health and medical. Industry Commercial HVAC / Air conditioning / AC A/C / Refrigeration and Air Conditioning / Chillers / Water Cooled Chillers / Air Cooled Chillers / Chilled Water Desired Experience Air conditioning and/or Chiller service and maintenance engineer, fault find and fix, PPM's. The Role A leading national mechanical engineering provider seeks an experienced HVAC Service and Maintenance Engineer to add to their Air Conditioning and Refrigeration Service Team. You will be focused on South East commercial planned preventive maintenance contracts and emergency fault find and fix call outs on large commercial HVAC VRF / VRV air conditioning systems and chillers from the main HVAC, air conditioning and chiller manufacturers. Experience Required You will have extensive previous hands-on experience servicing HVAC systems. Ideally you will be highly capable at fault find and fix. F-Gas 2079, hydrocarbons, refrigeration and air conditioning qualifications / certifications and manufacturer training would be an advantage especially NVQ level 2 or level 3. Great teamwork and communication skills are also important both from a client facing perspective and internal regional team cooperation to service contracts and resolve fault find and fix call outs both quickly and effectively. If you have worked your way up on the tools as an apprentice and are highly knowledgeable with or without Level 2 or Level 3 AC and refrigeration certifications then please still apply. The Company This is a long-established company that prides itself on having excellent company morale and career development. The company is one of the largest M&E service providers nationally and due to growth of the companies national contracts they are looking to add to their South East team. Their air conditioning and Chiller Engineers all have extensive and advanced knowledge on servicing large commercial HVAC systems from the top air conditioning and chiller manufacturers and their Service Engineers are highly skilled at advanced fault finding and fixing. The Package Initial indications are a yearly remuneration package from £42,000 to £52,000 for 40 hrs per week, overtime a company van or a car will be provided along with up to 14% pension contribution, private healthcare and dental. Furthermore, 27 days holiday + bank holidays. Jamieson Clark currently has over 50 live roles to offer and specialise in sales recruitment. Current vacancies for HVAC Service Engineers, Air Conditioning Service Engineers, HVAC Install Engineers, Air Conditioning Service Engineers, Product Managers, Contract Engineers, Pre-Sales Technical Engineers, Sales Engineers, Sales Executives, Business Development Managers and Sales Managers providing air conditioning systems, central plant, fan coils, HVAC, heat recovery, heat exchangers, split systems, ducted, cassette, ceiling suspended, wall mounted, variable refrigerant flow, VRF, VRV, DX, Refrigeration, AHU s, Air Handling Units, close control, Chillers, BMS, water cooled air conditioning units and other product & service based sectors. Send your CV to a consultant for advice on your next career move.
The Company: This is a fantastic opportunity to join the sales team of one of Europe s leading manufacturers of domestic and commercial boilers. With an innovative, pioneering approach to technology and a continuous commitment to research and development, they are the company to work for. As a multiple award-winning organisation, they offer an excellent working environment, outstanding career development opportunities, and a highly rewarding commission scheme. Covering the North of England. The Role of the Business Development Manager As the Business Development Manager, you will be responsible for selling the full range of commercial boilers and heat pumps to M&E contractors, consultants, local authorities, educational institutions, and healthcare providers. You will cover a large territory in the North of England, managing your diary via postcode areas, and occasional overnight stays will be required. Working closely with the Domestic Area Sales Managers team, you will receive high-quality leads and have a realistic target to achieve through identifying and developing new business opportunities. With support from an experienced internal admin team, you will produce your own quotes and manage multiple projects from start to finish. Benefits of the business Development Manager Up to £52k OTE £70k Hybrid Car Fuel car or milage company Credit card 25 days holiday plus BH enhanced Pension scheme Training The Ideal Person for the Business Development Manager Proven sales experience within the HVAC sector, ideally with knowledge of plant room equipment, flues, and related systems. Background in working with M&E contractors and consultants, with a strong track record of winning new business and developing long-term client relationships. Candidates from a commercial merchant background are strongly encouraged to apply, particularly those seeking a step up into a manufacturer role. Proactive and driven, with the confidence to make cold calls, secure meetings, and close sales. Excellent diary management, organisational skills, and the ability to prioritise effectively across a large territory. Strong communication and relationship-building skills, capable of engaging stakeholders at all levels. Willingness to travel across the North of England, including occasional overnight stays. If you think the role of Business Development Manager is for you, apply now! Consultant: Lisa Spiteri Email: (url removed) Tel no. (phone number removed) Candidates must be eligible to work and live in the UK. About On Target At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.
Sep 06, 2025
Full time
The Company: This is a fantastic opportunity to join the sales team of one of Europe s leading manufacturers of domestic and commercial boilers. With an innovative, pioneering approach to technology and a continuous commitment to research and development, they are the company to work for. As a multiple award-winning organisation, they offer an excellent working environment, outstanding career development opportunities, and a highly rewarding commission scheme. Covering the North of England. The Role of the Business Development Manager As the Business Development Manager, you will be responsible for selling the full range of commercial boilers and heat pumps to M&E contractors, consultants, local authorities, educational institutions, and healthcare providers. You will cover a large territory in the North of England, managing your diary via postcode areas, and occasional overnight stays will be required. Working closely with the Domestic Area Sales Managers team, you will receive high-quality leads and have a realistic target to achieve through identifying and developing new business opportunities. With support from an experienced internal admin team, you will produce your own quotes and manage multiple projects from start to finish. Benefits of the business Development Manager Up to £52k OTE £70k Hybrid Car Fuel car or milage company Credit card 25 days holiday plus BH enhanced Pension scheme Training The Ideal Person for the Business Development Manager Proven sales experience within the HVAC sector, ideally with knowledge of plant room equipment, flues, and related systems. Background in working with M&E contractors and consultants, with a strong track record of winning new business and developing long-term client relationships. Candidates from a commercial merchant background are strongly encouraged to apply, particularly those seeking a step up into a manufacturer role. Proactive and driven, with the confidence to make cold calls, secure meetings, and close sales. Excellent diary management, organisational skills, and the ability to prioritise effectively across a large territory. Strong communication and relationship-building skills, capable of engaging stakeholders at all levels. Willingness to travel across the North of England, including occasional overnight stays. If you think the role of Business Development Manager is for you, apply now! Consultant: Lisa Spiteri Email: (url removed) Tel no. (phone number removed) Candidates must be eligible to work and live in the UK. About On Target At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.
Job Description What if you could do the kind of work the world needs? At WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. A little more about your role Having a proven track record in both leading projects for your discipline and for an overall project team. Be able to demonstrate where your personal input has led to the commission being won or successfully delivered. Lead on Building Services - mechanical, electrical and public health (MEP) - as part of a wider multidisciplinary team on a wide range of Energy projects. Able to work using your own initiative with minimal supervision on all technical aspects of their discipline or have specific specialist experience applicable to the role. Able to work under the clear direction of the client and interpret the needs of the project as a whole to meet the full delivery needs. Consider the feasibility of the project specific to the discipline and lead the overall feasibility study for the project. Supervise the completion of detailed designs and supervise the work of others in this function. Take responsibility for and direct others in the production of detailed and performance specification for the discipline subject to review by colleagues prior to issue. Reviewing design programmes and ensuring that sufficient resource is available to complete the works Your Team You will be joining a team with a strong forward workload / order book including National Grid's Great Grid Upgrade The Great Grid Upgrade Powering The Things You Love. You will joining a growing team with lots of long term opportunities for career progression. You will work closely with likeminded individuals on exciting and challenging projects. We make extraordinary efforts to attract, develop, engage and retain the best professionals in our fields of expertise because this is what makes us great. We put the highest ethical standards at the centre of all we do, and professionalism is inherent in our offering. Whilst the role is advertised as Birmingham (Mailbox, UK), WSP have offices across the UK we would welcome you to. What we will be looking for you to demonstrate Key Technical Requirements: Having an understanding of the UK and European regulations applicable to the Building Services and how to demonstrate this in project execution. Have working understanding of latest design software packages to allow the allocation / direction of work on projects. Have understanding of working with Revit MEP or other 3D design software to allow the allocation / direction of work on projects. Have an ability to sketch and communicate technical detail graphically and effectively. Have working knowledge of AutoCAD to allow the allocation / direction of work on projects. Preferably understanding and experience of National Grid Substation requirements (for example; Control Buildings, GIS Buildings, and relevant NG TS) Electrical & Mechanical Design Skills: Small Power Lighting Fire Detection and Alarms Intruder Detection and Alarms (as well as Access Control and CCTV) Data / Telephone (cabling and outlets) Heating, Ventilation, and Air Conditioning (HVAC) Plumbing / Public Health Qualifications: BEng/Bsc/MEng in applicable engineering discipline Preferably CIBSE / IET / Engineering Council accredited honours degree or specific experience that will lead to Chartership, or working towards I Eng or C Eng status Revit MEP training applied to the discipline Don't quite meet all the criteria? Apply, and we can see how your experience aligns to this role and other opportunities within the team. Imagine a better future for you and a better future for us all. Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world. With us, you can. Apply today. About Us We are one of the world's leading engineering and professional services firms. Our 72,800 passionate people are united by the common purpose of creating positive, long-lasting impacts on the communities we serve through a culture of innovation, integrity, and inclusion. With over 9,000 professionals across the UK and Ireland, we are dedicated to our local communities and propelled by international brainpower. WHAT'S IN IT FOR YOU? Work-life balance At WSP, we understand that work is just one aspect of your life. It's important to make time for you, your family, friends, interests and your community. Our hybrid working policy offers the flexibility to work from home two days a week, while also providing opportunities to collaborate in our modern offices across the UK. Inclusivity & Belonging We welcome applicants with varied backgrounds and experiences. We enable rewarding careers by encouraging people to bring their whole and authentic selves to work so that our work represents the fullest spectrum of society. We celebrate integrity and treat people with respect, supporting each other and embracing a culture of inclusion and belonging at WSP. We have our employee resource groups bring together employees and allies with different backgrounds to promote our culture of inclusivity. Health & Wellbeing We are committed to supporting our people, giving you the tools to make improvements to your health and wellbeing through our Thrive programme. Our Virtual GP service gives you access to an NHS or Irish Medical Council GP at a time and place that suits you - giving you peace of mind and quick access to medical advice when you need it most. We also provide reasonable workplace adjustments for those in need. Additionally, you can benefit from the Gymflex scheme, which offers up to 40% off annual gym memberships through our WSP flexible benefits program, as well as a comprehensive menopause support package. Flex your time To enhance work-life balance, WSP offers the "WSP My Hour," allowing you to take one hour each day for personal activities, with the flexibility to make up the time earlier or later that day. We also provide part-time and flexible working arrangements, the option to purchase additional leave, and the ability to use your bank holiday entitlement to suit you. Your development We understand the importance of development and training to you. That's why we foster a supportive environment that invests in your growth, whether through training, mentoring, or Chartership. Here at WSP we positively encourage applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, pregnancy or maternity/paternity. As a Disability Confident leader, we will interview all disabled applicants who meet the essential criteria, please let us know if you require any workplace adjustments in support of your application.
Sep 06, 2025
Full time
Job Description What if you could do the kind of work the world needs? At WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. A little more about your role Having a proven track record in both leading projects for your discipline and for an overall project team. Be able to demonstrate where your personal input has led to the commission being won or successfully delivered. Lead on Building Services - mechanical, electrical and public health (MEP) - as part of a wider multidisciplinary team on a wide range of Energy projects. Able to work using your own initiative with minimal supervision on all technical aspects of their discipline or have specific specialist experience applicable to the role. Able to work under the clear direction of the client and interpret the needs of the project as a whole to meet the full delivery needs. Consider the feasibility of the project specific to the discipline and lead the overall feasibility study for the project. Supervise the completion of detailed designs and supervise the work of others in this function. Take responsibility for and direct others in the production of detailed and performance specification for the discipline subject to review by colleagues prior to issue. Reviewing design programmes and ensuring that sufficient resource is available to complete the works Your Team You will be joining a team with a strong forward workload / order book including National Grid's Great Grid Upgrade The Great Grid Upgrade Powering The Things You Love. You will joining a growing team with lots of long term opportunities for career progression. You will work closely with likeminded individuals on exciting and challenging projects. We make extraordinary efforts to attract, develop, engage and retain the best professionals in our fields of expertise because this is what makes us great. We put the highest ethical standards at the centre of all we do, and professionalism is inherent in our offering. Whilst the role is advertised as Birmingham (Mailbox, UK), WSP have offices across the UK we would welcome you to. What we will be looking for you to demonstrate Key Technical Requirements: Having an understanding of the UK and European regulations applicable to the Building Services and how to demonstrate this in project execution. Have working understanding of latest design software packages to allow the allocation / direction of work on projects. Have understanding of working with Revit MEP or other 3D design software to allow the allocation / direction of work on projects. Have an ability to sketch and communicate technical detail graphically and effectively. Have working knowledge of AutoCAD to allow the allocation / direction of work on projects. Preferably understanding and experience of National Grid Substation requirements (for example; Control Buildings, GIS Buildings, and relevant NG TS) Electrical & Mechanical Design Skills: Small Power Lighting Fire Detection and Alarms Intruder Detection and Alarms (as well as Access Control and CCTV) Data / Telephone (cabling and outlets) Heating, Ventilation, and Air Conditioning (HVAC) Plumbing / Public Health Qualifications: BEng/Bsc/MEng in applicable engineering discipline Preferably CIBSE / IET / Engineering Council accredited honours degree or specific experience that will lead to Chartership, or working towards I Eng or C Eng status Revit MEP training applied to the discipline Don't quite meet all the criteria? Apply, and we can see how your experience aligns to this role and other opportunities within the team. Imagine a better future for you and a better future for us all. Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world. With us, you can. Apply today. About Us We are one of the world's leading engineering and professional services firms. Our 72,800 passionate people are united by the common purpose of creating positive, long-lasting impacts on the communities we serve through a culture of innovation, integrity, and inclusion. With over 9,000 professionals across the UK and Ireland, we are dedicated to our local communities and propelled by international brainpower. WHAT'S IN IT FOR YOU? Work-life balance At WSP, we understand that work is just one aspect of your life. It's important to make time for you, your family, friends, interests and your community. Our hybrid working policy offers the flexibility to work from home two days a week, while also providing opportunities to collaborate in our modern offices across the UK. Inclusivity & Belonging We welcome applicants with varied backgrounds and experiences. We enable rewarding careers by encouraging people to bring their whole and authentic selves to work so that our work represents the fullest spectrum of society. We celebrate integrity and treat people with respect, supporting each other and embracing a culture of inclusion and belonging at WSP. We have our employee resource groups bring together employees and allies with different backgrounds to promote our culture of inclusivity. Health & Wellbeing We are committed to supporting our people, giving you the tools to make improvements to your health and wellbeing through our Thrive programme. Our Virtual GP service gives you access to an NHS or Irish Medical Council GP at a time and place that suits you - giving you peace of mind and quick access to medical advice when you need it most. We also provide reasonable workplace adjustments for those in need. Additionally, you can benefit from the Gymflex scheme, which offers up to 40% off annual gym memberships through our WSP flexible benefits program, as well as a comprehensive menopause support package. Flex your time To enhance work-life balance, WSP offers the "WSP My Hour," allowing you to take one hour each day for personal activities, with the flexibility to make up the time earlier or later that day. We also provide part-time and flexible working arrangements, the option to purchase additional leave, and the ability to use your bank holiday entitlement to suit you. Your development We understand the importance of development and training to you. That's why we foster a supportive environment that invests in your growth, whether through training, mentoring, or Chartership. Here at WSP we positively encourage applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, pregnancy or maternity/paternity. As a Disability Confident leader, we will interview all disabled applicants who meet the essential criteria, please let us know if you require any workplace adjustments in support of your application.
Base Location : For this role, we require successful applicants to be based from one of our Scottish locations - Glasgow, Perth, Inverness or Aberdeen. Salary : c£50-£55,000 depending on experience + car/cash allowance + performance-related bonus + a range of other benefits to support your family, finances and wellbeing. Working Pattern: Permanent Full Time Flexible First options available. The role SSEN Transmission have a number of opportunities for building services engineers to provide specialist engineering support on high profile and technically complex HVDC Converter Station and substation projects. These roles would suit an Experienced Building Services Engineer who has worked in a Consulting Environment or Contractor looking to take the next step into a client-side organisation. Although Power Transmission experience is preferred it is not needed. Candidates with building service experience within data centres, industrial process systems (O&G, Chemical etc), and water industries are encouraged to apply. You will Electrical Building Services Work with our Civil Building Designer, HVDC OEM and Tier 1 Contractors to develop, review and approve electrical building services designs and installations for our converter stations, which could include the following; Small Power and Lighting Cable Containment Design Fire Alarm Systems Emergency Power Systems Security Systems including CCTV Telecoms Integration of Building Management Systems into HVDC OEM Control System. Mechanical Building Services Work with our Civil Building Designer, HVDC OEM and Tier 1 Contractors to develop, review and approve mechanical building services designs and installations for our converter stations, which could include the following; Valve Cooling Systems (Pump, MCC, Cooling Fans, heat exchangers) HVAC Climate Systems (air handling units, dehumidifiers, ventilation ductwork, dampers, etc) General Plumbing and Pipework Fire Protection Systems including deluge Building Energy Performance calculations General Responsibilities - Define project scope and design from concept through to commissioning, including involvement in tenders, design reviews, and HAZID/HAZCON/HAZOP sessions. - Champion best practice in building services design, identifying improvements, innovative technologies, and managing engineering risks. - Collaborate within a multi-disciplinary team using Autodesk Construction Cloud (BIM) to coordinate 3D models, manage clash detection, and respond to RFIs/TQs. - Support installation and commissioning phases as an NEC Supervisor, ensuring technical compliance and quality. - Work with Technical Authorities and the Engineering Manager to manage specification deviations, report progress, and mitigate project risks. You have - Ideally hold a Degree or MSc in Building Services Engineering, be a Chartered Engineer or working towards this or can demonstrate relevant experience. - The ability to technically assess and critically challenge contractor submissions. - Excellent communication skills, with the ability to demonstrate diligence and to prioritise workload. - Familiarity with a range of technical solutions used in Building Services Installations. - Confidence to represent Project Engineering at Contractor Reviews and presenting RIBA stage 3+ design submissions at Internal LCP Gate 3 Design Authority Review presentations. About SSE SSE has a bold ambition - to be a leading energy company in a net zero world. We're investing around £10 million a day in homegrown energy to help power a cleaner, more secure future. SSEN Transmission own and operate the electricity transmission network across the north of Scotland. We transport energy from where it is generated to where it is needed, ensuring a safe and reliable electricity supply for the communities we serve. But that's not all - we're upgrading the grid to deliver cleaner, homegrown energy for the future and building a network for net zero to create secure power for generations to come. Flexible benefits to fit your life Enjoy discounts on private healthcare and gym memberships. Wellbeing benefits like a free online GP and 24/7 counselling service. Interest-free loans on tech and transport season tickets, or a new bike with our Cycle to Work scheme. As well as generous family entitlements such as maternity and adoption pay, and paternity leave. Work with an equal opportunity employer SSE will make any reasonable adjustments you need to ensure that your application and experience with us is positive. please contact Stephanie at or to discuss how we can support you. We're dedicated to fostering an open and inclusive workplace where people from all backgrounds can thrive. We create equal opportunities for everyone to succeed and especially welcome applications from those who may not be well represented in our workforce or industry. Ready to apply? Start your online application using the Apply Now box on this page. We only accept applications made online. We'll be in touch after the closing date to let you know if we'll be taking your application further. If you're offered a role with SSE, you'll need to complete a criminality check and a credit check before you start work.
Sep 06, 2025
Full time
Base Location : For this role, we require successful applicants to be based from one of our Scottish locations - Glasgow, Perth, Inverness or Aberdeen. Salary : c£50-£55,000 depending on experience + car/cash allowance + performance-related bonus + a range of other benefits to support your family, finances and wellbeing. Working Pattern: Permanent Full Time Flexible First options available. The role SSEN Transmission have a number of opportunities for building services engineers to provide specialist engineering support on high profile and technically complex HVDC Converter Station and substation projects. These roles would suit an Experienced Building Services Engineer who has worked in a Consulting Environment or Contractor looking to take the next step into a client-side organisation. Although Power Transmission experience is preferred it is not needed. Candidates with building service experience within data centres, industrial process systems (O&G, Chemical etc), and water industries are encouraged to apply. You will Electrical Building Services Work with our Civil Building Designer, HVDC OEM and Tier 1 Contractors to develop, review and approve electrical building services designs and installations for our converter stations, which could include the following; Small Power and Lighting Cable Containment Design Fire Alarm Systems Emergency Power Systems Security Systems including CCTV Telecoms Integration of Building Management Systems into HVDC OEM Control System. Mechanical Building Services Work with our Civil Building Designer, HVDC OEM and Tier 1 Contractors to develop, review and approve mechanical building services designs and installations for our converter stations, which could include the following; Valve Cooling Systems (Pump, MCC, Cooling Fans, heat exchangers) HVAC Climate Systems (air handling units, dehumidifiers, ventilation ductwork, dampers, etc) General Plumbing and Pipework Fire Protection Systems including deluge Building Energy Performance calculations General Responsibilities - Define project scope and design from concept through to commissioning, including involvement in tenders, design reviews, and HAZID/HAZCON/HAZOP sessions. - Champion best practice in building services design, identifying improvements, innovative technologies, and managing engineering risks. - Collaborate within a multi-disciplinary team using Autodesk Construction Cloud (BIM) to coordinate 3D models, manage clash detection, and respond to RFIs/TQs. - Support installation and commissioning phases as an NEC Supervisor, ensuring technical compliance and quality. - Work with Technical Authorities and the Engineering Manager to manage specification deviations, report progress, and mitigate project risks. You have - Ideally hold a Degree or MSc in Building Services Engineering, be a Chartered Engineer or working towards this or can demonstrate relevant experience. - The ability to technically assess and critically challenge contractor submissions. - Excellent communication skills, with the ability to demonstrate diligence and to prioritise workload. - Familiarity with a range of technical solutions used in Building Services Installations. - Confidence to represent Project Engineering at Contractor Reviews and presenting RIBA stage 3+ design submissions at Internal LCP Gate 3 Design Authority Review presentations. About SSE SSE has a bold ambition - to be a leading energy company in a net zero world. We're investing around £10 million a day in homegrown energy to help power a cleaner, more secure future. SSEN Transmission own and operate the electricity transmission network across the north of Scotland. We transport energy from where it is generated to where it is needed, ensuring a safe and reliable electricity supply for the communities we serve. But that's not all - we're upgrading the grid to deliver cleaner, homegrown energy for the future and building a network for net zero to create secure power for generations to come. Flexible benefits to fit your life Enjoy discounts on private healthcare and gym memberships. Wellbeing benefits like a free online GP and 24/7 counselling service. Interest-free loans on tech and transport season tickets, or a new bike with our Cycle to Work scheme. As well as generous family entitlements such as maternity and adoption pay, and paternity leave. Work with an equal opportunity employer SSE will make any reasonable adjustments you need to ensure that your application and experience with us is positive. please contact Stephanie at or to discuss how we can support you. We're dedicated to fostering an open and inclusive workplace where people from all backgrounds can thrive. We create equal opportunities for everyone to succeed and especially welcome applications from those who may not be well represented in our workforce or industry. Ready to apply? Start your online application using the Apply Now box on this page. We only accept applications made online. We'll be in touch after the closing date to let you know if we'll be taking your application further. If you're offered a role with SSE, you'll need to complete a criminality check and a credit check before you start work.
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Sep 05, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
System Project Coordinator (Field View) Bridgwater - Hinkley Point C Full Time Permanent Position Summary NG Bailey are proud to be involved in the Hinkley Point C project based in Bridgwater , Somerset. This is the first in a new generation of nuclear power stations in Britain providing zero-carbon electricity for around six million homes. NG Bailey, the UK's leading independent engineering and services business, are proud to be part of the MEH Alliance , a joint venture to deliver the mechanical, electrical and HVAC installation for the project. As part of recent growth on this project, we have a new vacancy for a System Project Coordinator to support the field view manager in ensuring planning, execution and completion of the installation scope is captured within the tool in line with contractual and client requirements. The Coordinator will also support the MEH team as required with updates and issue resolution within the Field View tool. Some of the key deliverables in this role will include: Configure the Field View software to meet requirements of the project, including templates, workflows, forms and reports. Execute the onboarding, offboarding, access, hardware for the MEH team and the Field View tool. Develop training material, guides and tutorials Troubleshoot user issues quickly and effectively. Support the Field View manager with Data Validation & Reporting on quality metrics available through the Field View database, presented through PowerBI. Support the Field View manager with ensuring ITPs are available for use within the Field View tool and that configuration control is managed effectively. Support the Field View Manager in cross discipline meetings as required. What we're looking for : Good experience working in IT systems roles with confident use of IT systems Good interpersonal and communication skills Relevant certifications or experience with Field View or similar construction/project management software are advantageous but not required, training will be given. Major Project Experience,?specifically on nuclear or working in alliance agreement projects would be beneficial Benefits We are able to offer a competitive salary with generous uplift and allowances for working away from home where required. 25 days holiday per annum, plus bank holidays Pension with leading provider and up to 8% employer contribution Private healthcare Discounts Personal development programme Flexible Benefits Please apply with an up to date CV, detailing your salary/package expectations. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. NG Bailey on the Hinkley Point C Project: We are working across both Hinkley Point C units to deliver the infrastructure that will power the station and its operations, creating 1,000 jobs including many specialist engineers. Works include the design and installation of circa 76,000 cables totalling over 3,000km in length; over 180km of cable containment support systems; fire and environmental sealing; design and installation of earthing systems, and specialist packages associated with data acquisition and plant control. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Sep 05, 2025
Full time
System Project Coordinator (Field View) Bridgwater - Hinkley Point C Full Time Permanent Position Summary NG Bailey are proud to be involved in the Hinkley Point C project based in Bridgwater , Somerset. This is the first in a new generation of nuclear power stations in Britain providing zero-carbon electricity for around six million homes. NG Bailey, the UK's leading independent engineering and services business, are proud to be part of the MEH Alliance , a joint venture to deliver the mechanical, electrical and HVAC installation for the project. As part of recent growth on this project, we have a new vacancy for a System Project Coordinator to support the field view manager in ensuring planning, execution and completion of the installation scope is captured within the tool in line with contractual and client requirements. The Coordinator will also support the MEH team as required with updates and issue resolution within the Field View tool. Some of the key deliverables in this role will include: Configure the Field View software to meet requirements of the project, including templates, workflows, forms and reports. Execute the onboarding, offboarding, access, hardware for the MEH team and the Field View tool. Develop training material, guides and tutorials Troubleshoot user issues quickly and effectively. Support the Field View manager with Data Validation & Reporting on quality metrics available through the Field View database, presented through PowerBI. Support the Field View manager with ensuring ITPs are available for use within the Field View tool and that configuration control is managed effectively. Support the Field View Manager in cross discipline meetings as required. What we're looking for : Good experience working in IT systems roles with confident use of IT systems Good interpersonal and communication skills Relevant certifications or experience with Field View or similar construction/project management software are advantageous but not required, training will be given. Major Project Experience,?specifically on nuclear or working in alliance agreement projects would be beneficial Benefits We are able to offer a competitive salary with generous uplift and allowances for working away from home where required. 25 days holiday per annum, plus bank holidays Pension with leading provider and up to 8% employer contribution Private healthcare Discounts Personal development programme Flexible Benefits Please apply with an up to date CV, detailing your salary/package expectations. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. NG Bailey on the Hinkley Point C Project: We are working across both Hinkley Point C units to deliver the infrastructure that will power the station and its operations, creating 1,000 jobs including many specialist engineers. Works include the design and installation of circa 76,000 cables totalling over 3,000km in length; over 180km of cable containment support systems; fire and environmental sealing; design and installation of earthing systems, and specialist packages associated with data acquisition and plant control. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Facilities Project Coordinator Bridgwater - Hinkley Point C Full Time Permanent Position Summary NG Bailey are proud to be involved in the Hinkley Point C project based in Bridgwater , Somerset. This is the first in a new generation of nuclear power stations in Britain providing zero-carbon electricity for around six million homes. NG Bailey, the UK's leading independent engineering and services business, are proud to be part of the MEH Alliance , a joint venture to deliver the mechanical, electrical and HVAC installation for the project. As part of recent growth on this project, we have a new vacancy for a Facilities Project Coordinator in supporting the planning, execution and in monitoring delivery and deployment of MEH offices and facilities. The successful applicant will assist the Compounds Project Manager in coordinating project activities, managing documentation and ensuring that project tasks are completed on time and within the set scope. The Coordinator will also support the MEH team as required with updates and issue resolution within the Field View tool. Some of the key deliverables in this role will include: Assist in the development and maintenance of project plans, schedules, and timelines. Coordinate project activities, ensuring tasks are completed on time and aligned with project goals. Monitor project progress and report any issues or delays to the Project Manager. Schedule and organize project meetings, prepare agendas, and record minutes. Maintain accurate and up-to-date project documentation, including project plans, schedules, and reports, providing these to stakeholders as required. Ensure all project documentation is properly stored and accessible to relevant team members. Assist in the preparation of project presentations and materials. Serve as a point of contact for project team members, stakeholders, and external partners. What we're looking for : Prior experience in a projects environment, preferably coordinating facilities/construction services. Strong interpersonal and communication skills. Relevant qualifications in engineering, business or a project related field would be advantageous. Major Project Experience,?specifically on nuclear or working in alliance agreement projects would be beneficial Benefits We are able to offer a competitive salary with generous uplift and allowances for working away from home where required. 25 days holiday per annum, plus bank holidays Pension with leading provider and up to 8% employer contribution Private healthcare Discounts Personal development programme Flexible Benefits Please apply with an up to date CV, detailing your salary/package expectations. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. NG Bailey on the Hinkley Point C Project: We are working across both Hinkley Point C units to deliver the infrastructure that will power the station and its operations, creating 1,000 jobs including many specialist engineers. Works include the design and installation of circa 76,000 cables totalling over 3,000km in length; over 180km of cable containment support systems; fire and environmental sealing; design and installation of earthing systems, and specialist packages associated with data acquisition and plant control. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Sep 05, 2025
Full time
Facilities Project Coordinator Bridgwater - Hinkley Point C Full Time Permanent Position Summary NG Bailey are proud to be involved in the Hinkley Point C project based in Bridgwater , Somerset. This is the first in a new generation of nuclear power stations in Britain providing zero-carbon electricity for around six million homes. NG Bailey, the UK's leading independent engineering and services business, are proud to be part of the MEH Alliance , a joint venture to deliver the mechanical, electrical and HVAC installation for the project. As part of recent growth on this project, we have a new vacancy for a Facilities Project Coordinator in supporting the planning, execution and in monitoring delivery and deployment of MEH offices and facilities. The successful applicant will assist the Compounds Project Manager in coordinating project activities, managing documentation and ensuring that project tasks are completed on time and within the set scope. The Coordinator will also support the MEH team as required with updates and issue resolution within the Field View tool. Some of the key deliverables in this role will include: Assist in the development and maintenance of project plans, schedules, and timelines. Coordinate project activities, ensuring tasks are completed on time and aligned with project goals. Monitor project progress and report any issues or delays to the Project Manager. Schedule and organize project meetings, prepare agendas, and record minutes. Maintain accurate and up-to-date project documentation, including project plans, schedules, and reports, providing these to stakeholders as required. Ensure all project documentation is properly stored and accessible to relevant team members. Assist in the preparation of project presentations and materials. Serve as a point of contact for project team members, stakeholders, and external partners. What we're looking for : Prior experience in a projects environment, preferably coordinating facilities/construction services. Strong interpersonal and communication skills. Relevant qualifications in engineering, business or a project related field would be advantageous. Major Project Experience,?specifically on nuclear or working in alliance agreement projects would be beneficial Benefits We are able to offer a competitive salary with generous uplift and allowances for working away from home where required. 25 days holiday per annum, plus bank holidays Pension with leading provider and up to 8% employer contribution Private healthcare Discounts Personal development programme Flexible Benefits Please apply with an up to date CV, detailing your salary/package expectations. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. NG Bailey on the Hinkley Point C Project: We are working across both Hinkley Point C units to deliver the infrastructure that will power the station and its operations, creating 1,000 jobs including many specialist engineers. Works include the design and installation of circa 76,000 cables totalling over 3,000km in length; over 180km of cable containment support systems; fire and environmental sealing; design and installation of earthing systems, and specialist packages associated with data acquisition and plant control. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Mobile Multi-Skilled Engineer Job ID 218193 Posted 04-Jun-2025 Service line GWS Segment Role type Full-time Areas of Interest Engineering/Maintenance Location(s) Exeter - England - United Kingdom of Great Britain and Northern Ireland Company Profile CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Mobile Multi Skilled Engineer - HVAC (F-Gas) CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Mobile Multi-Skilled Engineer to join the team located in Exeter and the South West . Role Summary: To operate, maintain and manage efficiently with the minimum of supervision new and existing electrical and mechanical building services. To undertake PPM, reactive works, statutory compliance and callouts as appropriate. Assistance with supervision of specialist sub-contractors and liaison with the CBRE management and client teams. Ensuring all CBRE and sub-contractor processes and procedures are followed and paper work is up to date. Also ensuring that all Health and Safety procedures are followed as per the CBRE QHSE guidelines. Carry out planned and reactive maintenance to M&E plant in line with statutory requirements and best industry standards. Ensure the efficient and effective operation, maintenance and repair of sites M&E Plant and Equipment and Services. To ensure compliance with CBRE Quality Management Systems and record keeping. Organise and assist in reactive repairs and PPM's to the sites M&E systems (HVAC, LV electrical distribution and water distribution systems). Carry out reactive repairs as instructed by Contract Support or Contract Management in line with the Service Level Agreements. To be capable and willing to undertake tasks outside of core competencies i.e. occasional general fabric and decoration tasks. Complete reactive and planned preventative maintenance tasks in order of priority to ensure optimum levels of service delivery are being achieved. Assistance with supervision of Specialist Service Contractors, including induction and monitoring activities. Attending team meetings and training courses as necessary to inform, maintain and develop skill levels. To work in a courteous and discreet manner in customer occupied areas and maintain a tidy / safe workspace. To carry out any additional duties as directed by the Supervisor or Manager. Experience Required: Education and Training: A good basic education is essential, with good written/spoken English and mathematical skills. Recognised technical qualifications to carry out the role of a multi-skilled CBRE engineer. F-Gas certificate either with: City & Guilds for 2079 Level 2 F gas Certificates BESA accredited courses FG Cat 1 - 4 LCL/Logic Certification Cat 1 - 4 Also: Should have served time in an apprenticeship or followed a recognised formal NVQ training programme with additional experience in a related industry environment. Knowledge of other building services an advantage. Qualified to level 3 Electrical IET BS 7671. (desirable) BS 7671:2018 - 18th Edition Regulations certificated and C&G 2391. (desirable) Experience: Thorough knowledge of commercial & domestic electrical/mechanical systems and associated plant. Working to Planned Preventative Maintenance Regimes. Fault finding Knowledge of lone working requirements. Good understanding of H&S safe working processes. Risk Assessment awareness/trained. Experience/understanding of critical plant for the support of Data Centres desirable. Knowledge of fire systems desirable. Working hours and circumstances: 08:00 to 17:00 with a one-hour unpaid lunch (this is variable due to work requirements) To be flexible regarding working hours, To be willing to contribute to out of hours on-call rota To be willing to undertake overtime when offered. To be willing to travel between CBRE sites when required at reasonable notice. To live within the region to allow accessible travel between the CBRE client sites. Driving Licence essential.
Sep 05, 2025
Full time
Mobile Multi-Skilled Engineer Job ID 218193 Posted 04-Jun-2025 Service line GWS Segment Role type Full-time Areas of Interest Engineering/Maintenance Location(s) Exeter - England - United Kingdom of Great Britain and Northern Ireland Company Profile CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries. Job Title: Mobile Multi Skilled Engineer - HVAC (F-Gas) CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Mobile Multi-Skilled Engineer to join the team located in Exeter and the South West . Role Summary: To operate, maintain and manage efficiently with the minimum of supervision new and existing electrical and mechanical building services. To undertake PPM, reactive works, statutory compliance and callouts as appropriate. Assistance with supervision of specialist sub-contractors and liaison with the CBRE management and client teams. Ensuring all CBRE and sub-contractor processes and procedures are followed and paper work is up to date. Also ensuring that all Health and Safety procedures are followed as per the CBRE QHSE guidelines. Carry out planned and reactive maintenance to M&E plant in line with statutory requirements and best industry standards. Ensure the efficient and effective operation, maintenance and repair of sites M&E Plant and Equipment and Services. To ensure compliance with CBRE Quality Management Systems and record keeping. Organise and assist in reactive repairs and PPM's to the sites M&E systems (HVAC, LV electrical distribution and water distribution systems). Carry out reactive repairs as instructed by Contract Support or Contract Management in line with the Service Level Agreements. To be capable and willing to undertake tasks outside of core competencies i.e. occasional general fabric and decoration tasks. Complete reactive and planned preventative maintenance tasks in order of priority to ensure optimum levels of service delivery are being achieved. Assistance with supervision of Specialist Service Contractors, including induction and monitoring activities. Attending team meetings and training courses as necessary to inform, maintain and develop skill levels. To work in a courteous and discreet manner in customer occupied areas and maintain a tidy / safe workspace. To carry out any additional duties as directed by the Supervisor or Manager. Experience Required: Education and Training: A good basic education is essential, with good written/spoken English and mathematical skills. Recognised technical qualifications to carry out the role of a multi-skilled CBRE engineer. F-Gas certificate either with: City & Guilds for 2079 Level 2 F gas Certificates BESA accredited courses FG Cat 1 - 4 LCL/Logic Certification Cat 1 - 4 Also: Should have served time in an apprenticeship or followed a recognised formal NVQ training programme with additional experience in a related industry environment. Knowledge of other building services an advantage. Qualified to level 3 Electrical IET BS 7671. (desirable) BS 7671:2018 - 18th Edition Regulations certificated and C&G 2391. (desirable) Experience: Thorough knowledge of commercial & domestic electrical/mechanical systems and associated plant. Working to Planned Preventative Maintenance Regimes. Fault finding Knowledge of lone working requirements. Good understanding of H&S safe working processes. Risk Assessment awareness/trained. Experience/understanding of critical plant for the support of Data Centres desirable. Knowledge of fire systems desirable. Working hours and circumstances: 08:00 to 17:00 with a one-hour unpaid lunch (this is variable due to work requirements) To be flexible regarding working hours, To be willing to contribute to out of hours on-call rota To be willing to undertake overtime when offered. To be willing to travel between CBRE sites when required at reasonable notice. To live within the region to allow accessible travel between the CBRE client sites. Driving Licence essential.
Job title: Sheet Metal Worker Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Manufacturing and installing ventilation and furniture Working to engineering standards, striving for quality first time Using a range of hand tools Hand skills required for manufacturing and installation purposes Understanding of manufacturing and installation drawing Your skills and experiences: Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide papers) Clear understanding of SHE, COSHH risks awareness and manufacturing processes Comfortable working in confined spaces and/or at height Safety certification i.e. SHE Induction, COSHH awareness, working at height etc Background in a major construction / manufacturing environment Please ensure you have attached a copy of your qualifications when submitting your application. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Sheet Metal Workers team: At BAE Systems, we are at the forefront of designing and building world-leading naval ships. Our work is vital to supporting the security and defense of nations around the globe, and we pride ourselves on delivering high-quality and innovative solutions. As part of our growing team, we are looking for a talented and experienced Sheet Metal Worker to join us as we drive to deliver eight Type 26 frigates to the Royal Navy. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks Closing Date: 1st July 2025 - Trades Test will be held in July 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. Pay: From £38,662.00 per year Application question(s): Do you have a background in Marine or HVAC Manufacturing and Fitting Environment? Do you have clear understanding of SHE, COSHH risk awareness and Manufacturing processes ? Work Location: In person
Sep 05, 2025
Full time
Job title: Sheet Metal Worker Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Manufacturing and installing ventilation and furniture Working to engineering standards, striving for quality first time Using a range of hand tools Hand skills required for manufacturing and installation purposes Understanding of manufacturing and installation drawing Your skills and experiences: Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide papers) Clear understanding of SHE, COSHH risks awareness and manufacturing processes Comfortable working in confined spaces and/or at height Safety certification i.e. SHE Induction, COSHH awareness, working at height etc Background in a major construction / manufacturing environment Please ensure you have attached a copy of your qualifications when submitting your application. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Sheet Metal Workers team: At BAE Systems, we are at the forefront of designing and building world-leading naval ships. Our work is vital to supporting the security and defense of nations around the globe, and we pride ourselves on delivering high-quality and innovative solutions. As part of our growing team, we are looking for a talented and experienced Sheet Metal Worker to join us as we drive to deliver eight Type 26 frigates to the Royal Navy. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks Closing Date: 1st July 2025 - Trades Test will be held in July 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible. Pay: From £38,662.00 per year Application question(s): Do you have a background in Marine or HVAC Manufacturing and Fitting Environment? Do you have clear understanding of SHE, COSHH risk awareness and Manufacturing processes ? Work Location: In person
Air Conditioning Engineer - Installation or Service & Maintenance Location: Leicester/ Midlands OR London based UK Salary: Competitive, based on experience Job Type: Full-time, Permanent Neosphere is working with a trusted name in building services, providing high-quality air conditioning and HVAC solutions across the Midlands and beyond. As they continue to grow, they are looking for a skilled and motivated Air Conditioning Engineer to join our team About the Role: This is a flexible role that can be tailored to your experience and strengths - whether your background is in installations , service and maintenance , or both. This company recognises that engineers often specialise in one area, and are happy to build your role around what you do best. Responsibilities (depending on your skill set): Installation of air conditioning systems (split, VRV/VRF, etc.) Routine service and preventative maintenance Diagnosing faults and carrying out repairs Ensuring work is completed to industry standards and customer expectations Completing all relevant documentation accurately and on time Liaising with customers and team members in a professional manner Requirements: Experience in either air conditioning installation or service and maintenance F-Gas certification (Category 1) Full UK driving license Strong diagnostic and problem-solving skills (for service roles) Good attention to detail and pride in workmanship Excellent communication and customer service skills Desirable: NVQ Level 2 or 3 in Air Conditioning and Refrigeration (or equivalent) Experience with a range of manufacturers and system types What We Offer: Competitive salary (based on experience) Company vehicle and fuel card Tools, uniform, and PPE provided Ongoing training and development opportunities Supportive team environment 20 days holiday bank holidays (increasing with service) Whether you're an installer or a maintenance expert - we want to hear from you. Join a company that values quality, professionalism, and its people.
Sep 05, 2025
Full time
Air Conditioning Engineer - Installation or Service & Maintenance Location: Leicester/ Midlands OR London based UK Salary: Competitive, based on experience Job Type: Full-time, Permanent Neosphere is working with a trusted name in building services, providing high-quality air conditioning and HVAC solutions across the Midlands and beyond. As they continue to grow, they are looking for a skilled and motivated Air Conditioning Engineer to join our team About the Role: This is a flexible role that can be tailored to your experience and strengths - whether your background is in installations , service and maintenance , or both. This company recognises that engineers often specialise in one area, and are happy to build your role around what you do best. Responsibilities (depending on your skill set): Installation of air conditioning systems (split, VRV/VRF, etc.) Routine service and preventative maintenance Diagnosing faults and carrying out repairs Ensuring work is completed to industry standards and customer expectations Completing all relevant documentation accurately and on time Liaising with customers and team members in a professional manner Requirements: Experience in either air conditioning installation or service and maintenance F-Gas certification (Category 1) Full UK driving license Strong diagnostic and problem-solving skills (for service roles) Good attention to detail and pride in workmanship Excellent communication and customer service skills Desirable: NVQ Level 2 or 3 in Air Conditioning and Refrigeration (or equivalent) Experience with a range of manufacturers and system types What We Offer: Competitive salary (based on experience) Company vehicle and fuel card Tools, uniform, and PPE provided Ongoing training and development opportunities Supportive team environment 20 days holiday bank holidays (increasing with service) Whether you're an installer or a maintenance expert - we want to hear from you. Join a company that values quality, professionalism, and its people.
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Sep 05, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Electrical Designer Infrastructure Projects Contract: Permanent Salary: Competitive Location: UK (Hybrid/Project Sites) DATS Engineering is recruiting on behalf of a client for an Electrical Designer to join a leading infrastructure team delivering high-quality projects. The Role Produce detailed 2D and 3D electrical layouts, containment routing, and instrumentation diagrams Ensure designs comply with BS7671 IEE Wiring Regulations and CDM Regulations 2015 Support site surveys and construction activities Work closely with Mechanical, Process, HVAC, and Civil engineers to deliver integrated solutions Apply innovation, problem-solving skills, and efficiency across all design stages About You HNC or Degree in a technical engineering discipline Proven experience delivering electrical designs in water, utilities, or infrastructure projects Knowledge of hazardous area design and intrinsically safe calculations Proficient in AutoCAD LT, Relux/Dialux, Trimble (Amtech) Pro Design Suite, Microsoft Office, Aveva, Navisworks, and Revit Why Join? This is an excellent opportunity for an Electrical Designer to make a real impact, grow professionally, and progress within a supportive and innovative environment. Apply today to take the next step in your career.
Sep 05, 2025
Full time
Electrical Designer Infrastructure Projects Contract: Permanent Salary: Competitive Location: UK (Hybrid/Project Sites) DATS Engineering is recruiting on behalf of a client for an Electrical Designer to join a leading infrastructure team delivering high-quality projects. The Role Produce detailed 2D and 3D electrical layouts, containment routing, and instrumentation diagrams Ensure designs comply with BS7671 IEE Wiring Regulations and CDM Regulations 2015 Support site surveys and construction activities Work closely with Mechanical, Process, HVAC, and Civil engineers to deliver integrated solutions Apply innovation, problem-solving skills, and efficiency across all design stages About You HNC or Degree in a technical engineering discipline Proven experience delivering electrical designs in water, utilities, or infrastructure projects Knowledge of hazardous area design and intrinsically safe calculations Proficient in AutoCAD LT, Relux/Dialux, Trimble (Amtech) Pro Design Suite, Microsoft Office, Aveva, Navisworks, and Revit Why Join? This is an excellent opportunity for an Electrical Designer to make a real impact, grow professionally, and progress within a supportive and innovative environment. Apply today to take the next step in your career.
Talk Staff Group Limited
Loughborough, Leicestershire
We are seeking a skilled Cooling Field Service Engineer to join a growing technical services team, specialising in refrigeration and air conditioning solutions for a variety of environments, including data centres. This role involves installation, commissioning, maintenance, troubleshooting, and client support, ensuring high service standards and technical excellence. To be considered for the role, you ll require the following essentials: Recognised qualification in refrigeration and air conditioning (e.g. City & Guilds Level 1 & 2) F-Gas qualified (or working towards) preferred Proven experience as a Cooling Field Service Engineer or in a similar refrigeration/air conditioning role Strong knowledge of mechanical and electrical systems, HVAC controllers, and industry regulations Excellent problem-solving skills, able to work independently and under pressure Good communication, teamwork, and customer service abilities Physically fit able to lift and move items over 30kg regularly Full UK driving licence and willingness to travel extensively Within this position, you ll also be: Install, commission, and maintain refrigeration and air conditioning equipment across the full product range Carry out preventative maintenance and urgent repairs on single and multi-module systems Conduct site surveys, technical analysis, and customer consultations Troubleshoot cooling issues, liaising with suppliers and internal departments to resolve problems quickly Coordinate projects during site implementations, ensuring deadlines and budgets are met Deliver exceptional customer service, including client training on installed systems Maintain accurate service records, reports, and equipment return processes If you are a motivated Cooling Field Service Engineer who thrives in a fast-paced, hands-on role and takes pride in delivering outstanding service, we d love to hear from you. Apply today and bring your expertise to a team that values technical excellence and customer satisfaction. Talk Staff Recruitment is an established division of Talk Staff Group and works with companies throughout the East Midlands and UK with roles including many areas such as: Accountancy & Finance, Human Resources, Marketing, Contact Centre and Office Support. Talk Staff Recruitment act as an Recruitment Agency in relation to this vacancy. See our website for more details and jobs available - (url removed) (phone number removed)
Sep 05, 2025
Full time
We are seeking a skilled Cooling Field Service Engineer to join a growing technical services team, specialising in refrigeration and air conditioning solutions for a variety of environments, including data centres. This role involves installation, commissioning, maintenance, troubleshooting, and client support, ensuring high service standards and technical excellence. To be considered for the role, you ll require the following essentials: Recognised qualification in refrigeration and air conditioning (e.g. City & Guilds Level 1 & 2) F-Gas qualified (or working towards) preferred Proven experience as a Cooling Field Service Engineer or in a similar refrigeration/air conditioning role Strong knowledge of mechanical and electrical systems, HVAC controllers, and industry regulations Excellent problem-solving skills, able to work independently and under pressure Good communication, teamwork, and customer service abilities Physically fit able to lift and move items over 30kg regularly Full UK driving licence and willingness to travel extensively Within this position, you ll also be: Install, commission, and maintain refrigeration and air conditioning equipment across the full product range Carry out preventative maintenance and urgent repairs on single and multi-module systems Conduct site surveys, technical analysis, and customer consultations Troubleshoot cooling issues, liaising with suppliers and internal departments to resolve problems quickly Coordinate projects during site implementations, ensuring deadlines and budgets are met Deliver exceptional customer service, including client training on installed systems Maintain accurate service records, reports, and equipment return processes If you are a motivated Cooling Field Service Engineer who thrives in a fast-paced, hands-on role and takes pride in delivering outstanding service, we d love to hear from you. Apply today and bring your expertise to a team that values technical excellence and customer satisfaction. Talk Staff Recruitment is an established division of Talk Staff Group and works with companies throughout the East Midlands and UK with roles including many areas such as: Accountancy & Finance, Human Resources, Marketing, Contact Centre and Office Support. Talk Staff Recruitment act as an Recruitment Agency in relation to this vacancy. See our website for more details and jobs available - (url removed) (phone number removed)
Gas & Air Source Heat Pump Installer Location: Oxford Your Responsibilities: Lead the delivery of on-site works including installations and servicing of heat pumps , hot water cylinders, and thermal storage systems Carry out central heating system installations and repairs in domestic and commercial settings Provide technical supervision and support to team members on-site Diagnose and repair faults across a range of heating systems Install, upgrade, and maintain heating, plumbing, sanitation, and HVAC systems Ensure compliance with PAS 2030, MCS, and Gas Safe regulations Complete work records via PDA or digital systems Participate in out-of-hours callouts and overtime where required Adhere to all health & safety procedures , including hazard reporting Maintain a high standard of customer service and professionalism on every job What You'll Need: Experience in the local authority or social housing sector Strong knowledge of heating and domestic appliance installations Proven experience with PAS 2030-compliant installs Background in fault finding and maintenance of commercial/domestic systems Familiarity with BMS, system controls, and press-fit pipework Strong commitment to health & safety standards Excellent communication and customer service skills Essential Qualifications: NVQ Level 2/3 in Domestic Plumbing (or City & Guilds equivalent) Level 3 Award in the Installation & Maintenance of Heat Pump Systems (C&G, BPEC, or LCL Awards) G3 Unvented Hot Water Cylinder Certification Water Regulations Certificate Full, clean UK Driving Licence
Sep 05, 2025
Full time
Gas & Air Source Heat Pump Installer Location: Oxford Your Responsibilities: Lead the delivery of on-site works including installations and servicing of heat pumps , hot water cylinders, and thermal storage systems Carry out central heating system installations and repairs in domestic and commercial settings Provide technical supervision and support to team members on-site Diagnose and repair faults across a range of heating systems Install, upgrade, and maintain heating, plumbing, sanitation, and HVAC systems Ensure compliance with PAS 2030, MCS, and Gas Safe regulations Complete work records via PDA or digital systems Participate in out-of-hours callouts and overtime where required Adhere to all health & safety procedures , including hazard reporting Maintain a high standard of customer service and professionalism on every job What You'll Need: Experience in the local authority or social housing sector Strong knowledge of heating and domestic appliance installations Proven experience with PAS 2030-compliant installs Background in fault finding and maintenance of commercial/domestic systems Familiarity with BMS, system controls, and press-fit pipework Strong commitment to health & safety standards Excellent communication and customer service skills Essential Qualifications: NVQ Level 2/3 in Domestic Plumbing (or City & Guilds equivalent) Level 3 Award in the Installation & Maintenance of Heat Pump Systems (C&G, BPEC, or LCL Awards) G3 Unvented Hot Water Cylinder Certification Water Regulations Certificate Full, clean UK Driving Licence
Job Description CABLE SYSTEMS ENGINEER What if you could do the kind of work the world needs? At WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. Don't quite meet all the criteria? Apply, and we can see how your experience aligns to this role and other opportunities within the team. A little more about your role As a Cable Systems Engineer working within the UK Energy business, you will be responsible for working as part of a multidisciplinary team delivering the power transmission infrastructure that will deliver Net Zero to the UK Energy System. WSP has a significant workload that will offer the opportunity to develop yourself and others over the next decade. As part of this, you will be responsible for: Innovative Projects : Work on groundbreaking projects that make a difference. As a Cable Systems Engineer, you'll have the opportunity to tackle complex engineering challenges and spearhead initiatives that drive our technology forward. Collaborative Culture : Join a team that values creativity and collaboration. We foster an environment where every idea counts, and teamwork is at the heart of our success. Career Growth : We believe in investing in our people. You'll have access to professional development opportunities, mentorship, and clear pathways for career advancement. Impactful Leadership : Work as part of a team of engineers and play a crucial role in shaping the future of our colleagues, products and services. Your expertise will directly influence our success. State-of-the-Art Resources : Work with the latest tools and technologies you need to innovate and excel in your role. Diversity and Inclusion : We are committed to building a diverse workforce that reflects the communities we serve and therefore you will be part of a team that will include colleagues from across the world. Your unique perspectives will help us drive innovation and foster an inclusive environment. This is an excellent opportunity to Design and develop cable systems for power distribution and transmission, including the selection of cables, connectors, and installation methods. Create detailed engineering drawings, specifications, and design documentation using software tools such as CYMCAP, AutoCAD and CableCAD. Conduct site surveys and assessments to gather data for cable system design. Perform technical calculations and analysis to ensure the electrical and mechanical performance of cable systems. Ensure designs comply with industry standards, safety regulations, and environmental guidelines. Collaborate with project managers, construction teams, and other stakeholders to integrate design requirements into project plans. Review and approve design modifications and provide technical support during installation. Conduct design reviews and quality assurance checks to ensure accuracy and completeness. Stay updated with the latest advancements in cable technology and design practices. What we will be looking for you to demonstrate Degree in Engineering or equivalent technical discipline, preferably Electrical or Power engineering. Extensive experience in the design, manufacture and test of HV cables for use in HVAC and desirable - HVDC projects both onshore and offshore; including HV cable system design and ratings (CYMCAP) An understanding of IEC cable standards and CIGRE technical policies, its suite of technical specifications and supporting documentation, and the capability to fulfil a role as a cable expert. Experience of witnessing 3rd party cable activities such as test, installation, transport etc. Experience of Working Groups and Technical committees such as CIGRE and IEEE. The ability to travel to projects occasionally. Preferable - Attained / working towards chartered engineer status Preferable - National Grid BP141 Authorisation Don't quite meet all the criteria? Apply, and we can see how your experience aligns to this role and other opportunities within the team. Imagine a better future for you and a better future for us all. Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world. With us, you can. Apply today. About Us We are one of the world's leading engineering and professional services firms. Our 72,800 passionate people are united by the common purpose of creating positive, long-lasting impacts on the communities we serve through a culture of innovation, integrity, and inclusion. With over 9,000 professionals across the UK and Ireland, we are dedicated to our local communities and propelled by international brainpower. WHAT'S IN IT FOR YOU? Work-life balance At WSP, we understand that work is just one aspect of your life. It's important to make time for you, your family, friends, interests and your community. Our hybrid working policy offers the flexibility to work from home two days a week, while also providing opportunities to collaborate in our modern offices across the UK. Inclusivity & Belonging We welcome applicants with varied backgrounds and experiences. We enable rewarding careers by encouraging people to bring their whole and authentic selves to work so that our work represents the fullest spectrum of society. We celebrate integrity and treat people with respect, supporting each other and embracing a culture of inclusion and belonging at WSP. We have our employee resource groups bring together employees and allies with different backgrounds to promote our culture of inclusivity. Health & Wellbeing We are committed to supporting our people, giving you the tools to make improvements to your health and wellbeing through our Thrive programme. Our Virtual GP service gives you access to an NHS or Irish Medical Council GP at a time and place that suits you - giving you peace of mind and quick access to medical advice when you need it most. We also provide reasonable workplace adjustments for those in need. Additionally, you can benefit from the Gymflex scheme, which offers up to 40% off annual gym memberships through our WSP flexible benefits program, as well as a comprehensive menopause support package. Flex your time To enhance work-life balance, WSP offers the "WSP My Hour," allowing you to take one hour each day for personal activities, with the flexibility to make up the time earlier or later that day. We also provide part-time and flexible working arrangements, the option to purchase additional leave, and the ability to use your bank holiday entitlement to suit you. Your development We understand the importance of development and training to you. That's why we foster a supportive environment that invests in your growth, whether through training, mentoring, or Chartership. Here at WSP we positively encourage applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, pregnancy or maternity/paternity. As a Disability Confident leader, we will interview all disabled applicants who meet the essential criteria, please let us know if you require any workplace adjustments in support of your application.
Sep 05, 2025
Full time
Job Description CABLE SYSTEMS ENGINEER What if you could do the kind of work the world needs? At WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. Don't quite meet all the criteria? Apply, and we can see how your experience aligns to this role and other opportunities within the team. A little more about your role As a Cable Systems Engineer working within the UK Energy business, you will be responsible for working as part of a multidisciplinary team delivering the power transmission infrastructure that will deliver Net Zero to the UK Energy System. WSP has a significant workload that will offer the opportunity to develop yourself and others over the next decade. As part of this, you will be responsible for: Innovative Projects : Work on groundbreaking projects that make a difference. As a Cable Systems Engineer, you'll have the opportunity to tackle complex engineering challenges and spearhead initiatives that drive our technology forward. Collaborative Culture : Join a team that values creativity and collaboration. We foster an environment where every idea counts, and teamwork is at the heart of our success. Career Growth : We believe in investing in our people. You'll have access to professional development opportunities, mentorship, and clear pathways for career advancement. Impactful Leadership : Work as part of a team of engineers and play a crucial role in shaping the future of our colleagues, products and services. Your expertise will directly influence our success. State-of-the-Art Resources : Work with the latest tools and technologies you need to innovate and excel in your role. Diversity and Inclusion : We are committed to building a diverse workforce that reflects the communities we serve and therefore you will be part of a team that will include colleagues from across the world. Your unique perspectives will help us drive innovation and foster an inclusive environment. This is an excellent opportunity to Design and develop cable systems for power distribution and transmission, including the selection of cables, connectors, and installation methods. Create detailed engineering drawings, specifications, and design documentation using software tools such as CYMCAP, AutoCAD and CableCAD. Conduct site surveys and assessments to gather data for cable system design. Perform technical calculations and analysis to ensure the electrical and mechanical performance of cable systems. Ensure designs comply with industry standards, safety regulations, and environmental guidelines. Collaborate with project managers, construction teams, and other stakeholders to integrate design requirements into project plans. Review and approve design modifications and provide technical support during installation. Conduct design reviews and quality assurance checks to ensure accuracy and completeness. Stay updated with the latest advancements in cable technology and design practices. What we will be looking for you to demonstrate Degree in Engineering or equivalent technical discipline, preferably Electrical or Power engineering. Extensive experience in the design, manufacture and test of HV cables for use in HVAC and desirable - HVDC projects both onshore and offshore; including HV cable system design and ratings (CYMCAP) An understanding of IEC cable standards and CIGRE technical policies, its suite of technical specifications and supporting documentation, and the capability to fulfil a role as a cable expert. Experience of witnessing 3rd party cable activities such as test, installation, transport etc. Experience of Working Groups and Technical committees such as CIGRE and IEEE. The ability to travel to projects occasionally. Preferable - Attained / working towards chartered engineer status Preferable - National Grid BP141 Authorisation Don't quite meet all the criteria? Apply, and we can see how your experience aligns to this role and other opportunities within the team. Imagine a better future for you and a better future for us all. Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world. With us, you can. Apply today. About Us We are one of the world's leading engineering and professional services firms. Our 72,800 passionate people are united by the common purpose of creating positive, long-lasting impacts on the communities we serve through a culture of innovation, integrity, and inclusion. With over 9,000 professionals across the UK and Ireland, we are dedicated to our local communities and propelled by international brainpower. WHAT'S IN IT FOR YOU? Work-life balance At WSP, we understand that work is just one aspect of your life. It's important to make time for you, your family, friends, interests and your community. Our hybrid working policy offers the flexibility to work from home two days a week, while also providing opportunities to collaborate in our modern offices across the UK. Inclusivity & Belonging We welcome applicants with varied backgrounds and experiences. We enable rewarding careers by encouraging people to bring their whole and authentic selves to work so that our work represents the fullest spectrum of society. We celebrate integrity and treat people with respect, supporting each other and embracing a culture of inclusion and belonging at WSP. We have our employee resource groups bring together employees and allies with different backgrounds to promote our culture of inclusivity. Health & Wellbeing We are committed to supporting our people, giving you the tools to make improvements to your health and wellbeing through our Thrive programme. Our Virtual GP service gives you access to an NHS or Irish Medical Council GP at a time and place that suits you - giving you peace of mind and quick access to medical advice when you need it most. We also provide reasonable workplace adjustments for those in need. Additionally, you can benefit from the Gymflex scheme, which offers up to 40% off annual gym memberships through our WSP flexible benefits program, as well as a comprehensive menopause support package. Flex your time To enhance work-life balance, WSP offers the "WSP My Hour," allowing you to take one hour each day for personal activities, with the flexibility to make up the time earlier or later that day. We also provide part-time and flexible working arrangements, the option to purchase additional leave, and the ability to use your bank holiday entitlement to suit you. Your development We understand the importance of development and training to you. That's why we foster a supportive environment that invests in your growth, whether through training, mentoring, or Chartership. Here at WSP we positively encourage applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, pregnancy or maternity/paternity. As a Disability Confident leader, we will interview all disabled applicants who meet the essential criteria, please let us know if you require any workplace adjustments in support of your application.
