Electrical Architect 6 month contract Based in Stevenage Offering circa 80ph Inside IR35 Do you have experience designing Electrical/Electronic systems? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Architect, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Responsible for the electrical architecture and requirements for products System electrical requirements Interface definitions and characteristics between subsystems/equipment Power architecture, including power budget and power profiles Data communication and processing architecture Requirements for EMC, bonding, grounding and screening Signal safety, including routing of safety-related signals Your skillset may include: Electrical/electronics experience Interface definitions Knowledge of defence/industry standards Systems engineering Writing reports Power supplies Actuators Data communication Sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electrical Architect 6 month contract Based in Stevenage Offering circa 80ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Sep 10, 2025
Contractor
Electrical Architect 6 month contract Based in Stevenage Offering circa 80ph Inside IR35 Do you have experience designing Electrical/Electronic systems? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Architect, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Responsible for the electrical architecture and requirements for products System electrical requirements Interface definitions and characteristics between subsystems/equipment Power architecture, including power budget and power profiles Data communication and processing architecture Requirements for EMC, bonding, grounding and screening Signal safety, including routing of safety-related signals Your skillset may include: Electrical/electronics experience Interface definitions Knowledge of defence/industry standards Systems engineering Writing reports Power supplies Actuators Data communication Sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electrical Architect 6 month contract Based in Stevenage Offering circa 80ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Lead Electrical Engineer The Asset Support and Outage Excellence Team play a key role supporting power plant and gas storage projects, outages and maintenance activities across Uniper UK and Swedish assets. The role is high-profile in helping to ensure security of supply in the UK and deliver Uniper's business strategy to accelerate the energy transition. We are looking for an experienced Lead Electrical Engineer based in the South East but is expected to provide support at any UK location to fill a discipline specific role. This is an exciting time to join the team and represents an opportunity for the right individual to work with a diverse mix of both established and new power plant technology on advanced power stations and storage facilities. This is a tremendous opportunity offering development and experience on a massive scale, supporting assts and teams across power generation and storage stations. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities We are looking for people who can bring a flexible, enthusiastic approach, are highly self-motivated, conscientious and can demonstrate ownership of issues through to the implementation of solutions at any of our assets across the UK. You will be capable of demonstrating and developing extensive knowledge and skills in a range of varied electrical engineering and maintenance work activities of a complex and non-routine nature in such a way as to maximise resource utilisation and power plant availability. You must display capacity for individual responsibility and autonomy while demonstrating exemplary commitment to HSSE and Quality cultures. Key Activities • Utilising your skills and experience to lead and deliver projects and outages, identifying and managing stakeholders across Uniper's functional organisation and supply chain, ensuring process and regulatory compliance with the highest standard of HSSE and Quality performance. • You will undertake proactive and reactive work, including fault finding, problem solving and investigations, across a broad range of process plant and electrical systems in support of performance against Key Performance Indicators (safety, time, cost, quality, technical performance and compliance). • You will have the proven capabilities to lead project teams and complex projects • You will ensure best practice is employed and shared across Uniper sites by networking and benchmarking comparisons with plants, departments, engineers, industries and Uniper teams to achieve optimum levels of performance, revenue and capital expenditure. • You will be responsible for defining scopes of work and developing both technical and contract specifications. • Your attention to detail will ensure the establishment and delivery of contractor Quality Assurance and Quality Control. • You will actively promote a culture of health, safety, environmental awareness and quality; seek out improvements in all these areas and directly contribute to their development, planning and delivery for Asset Support and Uniper. Your profile Essential • You will be educated to a Higher National Diploma or Degree level in an Electrical Engineering discipline, supported with a sound technical knowledge of engineering, project management and maintenance practices gained through experience. • You will be able to apply your good working knowledge of health, safety and environmental legislation and standards to NEBOSH Certificate level or a recognised equivalent in a practical manner. • Your experience in power plant or equivalent electrical engineering including generators, motors, HV transformers, switchgear and HV distribution systems, will enable you to correctly maintain, understand and manage system and equipment risks. • Your strong interpersonal skills will enable effective working relationships within the team, across business functions and with senior stakeholders. • Your excellent communication, planning and organisational skills will enable effective task prioritisation and resource management. • You will have in depth knowledge, understanding and be able to demonstrate application of project management tools and techniques, with the skills to appropriately challenge ensuring projects are suitably defined and agreed to optimise business value. • Your organisational, contract and project management skills enable you to run several contracts within a project which involve on/off site working including the health, safety, environmental and quality aspects as well as the commercial and technical issues. • Full and clean UK driving license. Desirable • Use and knowledge of best practice lean tools for resolving engineering issues to root cause level. • APMP or Prince 2 project management qualification. • Knowledge and competence of using SAP based systems. • Experience of working in a fast paced environment. • A sound understanding of power plant operations, knowledge of current regulations and policy which affect the management and operations of power plant engineering assets. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: Salary: £63,000 - £91,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
Sep 10, 2025
Full time
Lead Electrical Engineer The Asset Support and Outage Excellence Team play a key role supporting power plant and gas storage projects, outages and maintenance activities across Uniper UK and Swedish assets. The role is high-profile in helping to ensure security of supply in the UK and deliver Uniper's business strategy to accelerate the energy transition. We are looking for an experienced Lead Electrical Engineer based in the South East but is expected to provide support at any UK location to fill a discipline specific role. This is an exciting time to join the team and represents an opportunity for the right individual to work with a diverse mix of both established and new power plant technology on advanced power stations and storage facilities. This is a tremendous opportunity offering development and experience on a massive scale, supporting assts and teams across power generation and storage stations. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities We are looking for people who can bring a flexible, enthusiastic approach, are highly self-motivated, conscientious and can demonstrate ownership of issues through to the implementation of solutions at any of our assets across the UK. You will be capable of demonstrating and developing extensive knowledge and skills in a range of varied electrical engineering and maintenance work activities of a complex and non-routine nature in such a way as to maximise resource utilisation and power plant availability. You must display capacity for individual responsibility and autonomy while demonstrating exemplary commitment to HSSE and Quality cultures. Key Activities • Utilising your skills and experience to lead and deliver projects and outages, identifying and managing stakeholders across Uniper's functional organisation and supply chain, ensuring process and regulatory compliance with the highest standard of HSSE and Quality performance. • You will undertake proactive and reactive work, including fault finding, problem solving and investigations, across a broad range of process plant and electrical systems in support of performance against Key Performance Indicators (safety, time, cost, quality, technical performance and compliance). • You will have the proven capabilities to lead project teams and complex projects • You will ensure best practice is employed and shared across Uniper sites by networking and benchmarking comparisons with plants, departments, engineers, industries and Uniper teams to achieve optimum levels of performance, revenue and capital expenditure. • You will be responsible for defining scopes of work and developing both technical and contract specifications. • Your attention to detail will ensure the establishment and delivery of contractor Quality Assurance and Quality Control. • You will actively promote a culture of health, safety, environmental awareness and quality; seek out improvements in all these areas and directly contribute to their development, planning and delivery for Asset Support and Uniper. Your profile Essential • You will be educated to a Higher National Diploma or Degree level in an Electrical Engineering discipline, supported with a sound technical knowledge of engineering, project management and maintenance practices gained through experience. • You will be able to apply your good working knowledge of health, safety and environmental legislation and standards to NEBOSH Certificate level or a recognised equivalent in a practical manner. • Your experience in power plant or equivalent electrical engineering including generators, motors, HV transformers, switchgear and HV distribution systems, will enable you to correctly maintain, understand and manage system and equipment risks. • Your strong interpersonal skills will enable effective working relationships within the team, across business functions and with senior stakeholders. • Your excellent communication, planning and organisational skills will enable effective task prioritisation and resource management. • You will have in depth knowledge, understanding and be able to demonstrate application of project management tools and techniques, with the skills to appropriately challenge ensuring projects are suitably defined and agreed to optimise business value. • Your organisational, contract and project management skills enable you to run several contracts within a project which involve on/off site working including the health, safety, environmental and quality aspects as well as the commercial and technical issues. • Full and clean UK driving license. Desirable • Use and knowledge of best practice lean tools for resolving engineering issues to root cause level. • APMP or Prince 2 project management qualification. • Knowledge and competence of using SAP based systems. • Experience of working in a fast paced environment. • A sound understanding of power plant operations, knowledge of current regulations and policy which affect the management and operations of power plant engineering assets. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: Salary: £63,000 - £91,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
Lead Electrical Engineer The Asset Support and Outage Excellence Team play a key role supporting power plant and gas storage projects, outages and maintenance activities across Uniper UK and Swedish assets. The role is high-profile in helping to ensure security of supply in the UK and deliver Uniper's business strategy to accelerate the energy transition. We are looking for an experienced Lead Electrical Engineer based in the South East but is expected to provide support at any UK location to fill a discipline specific role. This is an exciting time to join the team and represents an opportunity for the right individual to work with a diverse mix of both established and new power plant technology on advanced power stations and storage facilities. This is a tremendous opportunity offering development and experience on a massive scale, supporting assts and teams across power generation and storage stations. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities We are looking for people who can bring a flexible, enthusiastic approach, are highly self-motivated, conscientious and can demonstrate ownership of issues through to the implementation of solutions at any of our assets across the UK. You will be capable of demonstrating and developing extensive knowledge and skills in a range of varied electrical engineering and maintenance work activities of a complex and non-routine nature in such a way as to maximise resource utilisation and power plant availability. You must display capacity for individual responsibility and autonomy while demonstrating exemplary commitment to HSSE and Quality cultures. Key Activities • Utilising your skills and experience to lead and deliver projects and outages, identifying and managing stakeholders across Uniper's functional organisation and supply chain, ensuring process and regulatory compliance with the highest standard of HSSE and Quality performance. • You will undertake proactive and reactive work, including fault finding, problem solving and investigations, across a broad range of process plant and electrical systems in support of performance against Key Performance Indicators (safety, time, cost, quality, technical performance and compliance). • You will have the proven capabilities to lead project teams and complex projects • You will ensure best practice is employed and shared across Uniper sites by networking and benchmarking comparisons with plants, departments, engineers, industries and Uniper teams to achieve optimum levels of performance, revenue and capital expenditure. • You will be responsible for defining scopes of work and developing both technical and contract specifications. • Your attention to detail will ensure the establishment and delivery of contractor Quality Assurance and Quality Control. • You will actively promote a culture of health, safety, environmental awareness and quality; seek out improvements in all these areas and directly contribute to their development, planning and delivery for Asset Support and Uniper. Your profile Essential • You will be educated to a Higher National Diploma or Degree level in an Electrical Engineering discipline, supported with a sound technical knowledge of engineering, project management and maintenance practices gained through experience. • You will be able to apply your good working knowledge of health, safety and environmental legislation and standards to NEBOSH Certificate level or a recognised equivalent in a practical manner. • Your experience in power plant or equivalent electrical engineering including generators, motors, HV transformers, switchgear and HV distribution systems, will enable you to correctly maintain, understand and manage system and equipment risks. • Your strong interpersonal skills will enable effective working relationships within the team, across business functions and with senior stakeholders. • Your excellent communication, planning and organisational skills will enable effective task prioritisation and resource management. • You will have in depth knowledge, understanding and be able to demonstrate application of project management tools and techniques, with the skills to appropriately challenge ensuring projects are suitably defined and agreed to optimise business value. • Your organisational, contract and project management skills enable you to run several contracts within a project which involve on/off site working including the health, safety, environmental and quality aspects as well as the commercial and technical issues. • Full and clean UK driving license. Desirable • Use and knowledge of best practice lean tools for resolving engineering issues to root cause level. • APMP or Prince 2 project management qualification. • Knowledge and competence of using SAP based systems. • Experience of working in a fast paced environment. • A sound understanding of power plant operations, knowledge of current regulations and policy which affect the management and operations of power plant engineering assets. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: Salary: £63,000 - £91,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
Sep 10, 2025
Full time
Lead Electrical Engineer The Asset Support and Outage Excellence Team play a key role supporting power plant and gas storage projects, outages and maintenance activities across Uniper UK and Swedish assets. The role is high-profile in helping to ensure security of supply in the UK and deliver Uniper's business strategy to accelerate the energy transition. We are looking for an experienced Lead Electrical Engineer based in the South East but is expected to provide support at any UK location to fill a discipline specific role. This is an exciting time to join the team and represents an opportunity for the right individual to work with a diverse mix of both established and new power plant technology on advanced power stations and storage facilities. This is a tremendous opportunity offering development and experience on a massive scale, supporting assts and teams across power generation and storage stations. We are Uniper At Uniper, we are pro-actively transforming the world of energy whilst at the same time ensuring security of energy supply. As an internationally operating company, we work in very diverse teams with the greatest possible working time flexibility for our employees. Our corporate culture is characterized by equal opportunities, mutual appreciation, and respect. With us, you will be able to develop new business models, work on technological solutions for a modern, sustainable, and future-oriented energy supply as well as pro-actively help to shape changes. Interested? Then we will look forward to meeting you! Your responsibilities We are looking for people who can bring a flexible, enthusiastic approach, are highly self-motivated, conscientious and can demonstrate ownership of issues through to the implementation of solutions at any of our assets across the UK. You will be capable of demonstrating and developing extensive knowledge and skills in a range of varied electrical engineering and maintenance work activities of a complex and non-routine nature in such a way as to maximise resource utilisation and power plant availability. You must display capacity for individual responsibility and autonomy while demonstrating exemplary commitment to HSSE and Quality cultures. Key Activities • Utilising your skills and experience to lead and deliver projects and outages, identifying and managing stakeholders across Uniper's functional organisation and supply chain, ensuring process and regulatory compliance with the highest standard of HSSE and Quality performance. • You will undertake proactive and reactive work, including fault finding, problem solving and investigations, across a broad range of process plant and electrical systems in support of performance against Key Performance Indicators (safety, time, cost, quality, technical performance and compliance). • You will have the proven capabilities to lead project teams and complex projects • You will ensure best practice is employed and shared across Uniper sites by networking and benchmarking comparisons with plants, departments, engineers, industries and Uniper teams to achieve optimum levels of performance, revenue and capital expenditure. • You will be responsible for defining scopes of work and developing both technical and contract specifications. • Your attention to detail will ensure the establishment and delivery of contractor Quality Assurance and Quality Control. • You will actively promote a culture of health, safety, environmental awareness and quality; seek out improvements in all these areas and directly contribute to their development, planning and delivery for Asset Support and Uniper. Your profile Essential • You will be educated to a Higher National Diploma or Degree level in an Electrical Engineering discipline, supported with a sound technical knowledge of engineering, project management and maintenance practices gained through experience. • You will be able to apply your good working knowledge of health, safety and environmental legislation and standards to NEBOSH Certificate level or a recognised equivalent in a practical manner. • Your experience in power plant or equivalent electrical engineering including generators, motors, HV transformers, switchgear and HV distribution systems, will enable you to correctly maintain, understand and manage system and equipment risks. • Your strong interpersonal skills will enable effective working relationships within the team, across business functions and with senior stakeholders. • Your excellent communication, planning and organisational skills will enable effective task prioritisation and resource management. • You will have in depth knowledge, understanding and be able to demonstrate application of project management tools and techniques, with the skills to appropriately challenge ensuring projects are suitably defined and agreed to optimise business value. • Your organisational, contract and project management skills enable you to run several contracts within a project which involve on/off site working including the health, safety, environmental and quality aspects as well as the commercial and technical issues. • Full and clean UK driving license. Desirable • Use and knowledge of best practice lean tools for resolving engineering issues to root cause level. • APMP or Prince 2 project management qualification. • Knowledge and competence of using SAP based systems. • Experience of working in a fast paced environment. • A sound understanding of power plant operations, knowledge of current regulations and policy which affect the management and operations of power plant engineering assets. Your qualities At Uniper, we not only reward our employees with attractive salaries, an excellent company pension and health related benefits for their hard work and dedication to shaping the future energy transition. You can also expect a supportive working culture that offers a wide range of creative and innovative ideas. We enable various flexible working arrangements, whilst also supporting with home office equipment. Through regular training and workshops, together we work towards visualising yourself in our company as if it were your own. We support you in highlighting your individual potential, achieving your personal goals, and reaching your ambitions. We invite you to become part of our diverse company with international colleagues from more than 80 countries. As an employer, Uniper has committed itself to providing special support to certain areas: Competitive salary Personal development and Learning opportunities Enhanced company pension - With up to 12% company contributions 26 days annual leave plus Bank Holidays Electric vehicle charging at our sites In house Occupational Health Services Company funded Private Medical Insurance including free GP service Performance related benefits Access to a range of flexible benefits such as Share Incentive Plan, Dental, Critical Illness and Life Insurance, Cycle2Work, or buy and sell extra holiday Future career opportunities (UK & International) with a strong focus on Diversity Equity and Inclusion Our employees are the reason for our success. Therefore, you will find many other benefits at the local level to help you reach your potential. Energy evolutionary wanted! Your contact Should you have any questions about this opportunity, please contact the UK Talent Acquisition Manager dominic.lindsey(at)uniper.energy Please note, any CV's sent via email would not be taken into consideration. All CV's must be submitted via the online application process only. Job information Contract type: Unlimited Working Hours: Full Time Start Date: ASAP Deadline: Salary: £63,000 - £91,000 As an employer, Uniper is committed to diversity and equal opportunities. Therefore, we encourage applications from suitably qualified individuals whose capabilities match the role requirements regardless of gender, origin, disability, age, religion, ideology, sexual identity or marital status. We live inclusion and support flexible working.
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market, and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 3,600+ associates, the company's products are sold at key retailers, online and offline, and through distributors around the world . Location: Battersea, London, Hybrid 3 days a week in the office We are looking for a Senior Product Design Engineer, to join our UK NPD team building a new generation of innovative products for our Ninja brand. We thrive on designing great products that delight our customers. Working as part of our London Design Office, you will bring technical substance and inspiration to our creative efforts to deliver credible solutions to the market. What You'll Do: Takes a lead role (independently and in teams) to solve technical issues found in the development of a product. Mentors more junior team members, with potential for line-management if desired. Supports all team members and encourages their efforts. Collaborates to help establish a project's user, design, and functional requirements, deliver robust solutions to satisfy those requirements, then help to validate through testing and building consensus on next steps. Takes overall ownership of designs through conception, CAD execution, prototyping and verification, whilst consistently working at pace & successfully develops team to do the same. Continuously evaluates and improves designs for cost efficiency, manufacturing improvements, increased quality and value to consumers. Applies sound engineering/ product design standards to deliver real solutions. Applies understanding & experience of high-volume manufacturing processes and materials to optimize designs. Communicates effectively and professionally with colleagues. Collaborates seamlessly with our U.S., U.K., and China-based Product Development teams, multi-functional teams, and executive teams to ensure that great ideas make it through to production. What You'll Bring Typically, 5+ years of proven experience in Mechanical/ Electro-Mechanical Engineering environment. Mechanical Design & Analysis - Strong understanding of mechanical systems in high-voltage environments, including material selection, heat dissipation, vibration control, and structural integrity. Electromechanical Systems - Working knowledge of how mechanical components interact with electrical systems, including insulating materials, creepage/clearance distances, and thermal management. CAD - Proficiency in SolidWorks (ideally) or Creo Manufacturing & Materials - Extensive experience in Injection moulding - Understanding of materials suitable for high-voltage applications (PPS / PAGF) High-Voltage Insulation & Safety - Expertise in managing electrical safety risks (dialectic, hi-pot, arcing etc) Risk Assessment & Failure Mode Analysis - Experience in FMEA, DFMEA, and HAZOP to assess risks in high-voltage systems. Testing & Certification Requirements - Understanding of IP ratings, dielectric strength testing, thermal runaway testing, and partial discharge testing. Prototype Development & Testing - Ability to design, build, and test mechanical prototypes in controlled environments. Environmental & Endurance Testing - Familiarity with thermal cycling, humidity, vibration, and impact testing to ensure product reliability. Drawing & Eng Specification - Proficiency 2D drawings & assemblies, BOM management - working GD&T knowledge would be a bonus Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja's Candidate Privacy Notice can be found here: For candidates based in China, please visit: For candidates based in Vietnam, please visit: We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
Sep 10, 2025
Full time
About Us SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people's lives in homes around the world. Powered by two trusted, global brands, Shark and Ninja , the company has a proven track record of bringing disruptive innovation to market, and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. Headquartered in Needham, Massachusetts with more than 3,600+ associates, the company's products are sold at key retailers, online and offline, and through distributors around the world . Location: Battersea, London, Hybrid 3 days a week in the office We are looking for a Senior Product Design Engineer, to join our UK NPD team building a new generation of innovative products for our Ninja brand. We thrive on designing great products that delight our customers. Working as part of our London Design Office, you will bring technical substance and inspiration to our creative efforts to deliver credible solutions to the market. What You'll Do: Takes a lead role (independently and in teams) to solve technical issues found in the development of a product. Mentors more junior team members, with potential for line-management if desired. Supports all team members and encourages their efforts. Collaborates to help establish a project's user, design, and functional requirements, deliver robust solutions to satisfy those requirements, then help to validate through testing and building consensus on next steps. Takes overall ownership of designs through conception, CAD execution, prototyping and verification, whilst consistently working at pace & successfully develops team to do the same. Continuously evaluates and improves designs for cost efficiency, manufacturing improvements, increased quality and value to consumers. Applies sound engineering/ product design standards to deliver real solutions. Applies understanding & experience of high-volume manufacturing processes and materials to optimize designs. Communicates effectively and professionally with colleagues. Collaborates seamlessly with our U.S., U.K., and China-based Product Development teams, multi-functional teams, and executive teams to ensure that great ideas make it through to production. What You'll Bring Typically, 5+ years of proven experience in Mechanical/ Electro-Mechanical Engineering environment. Mechanical Design & Analysis - Strong understanding of mechanical systems in high-voltage environments, including material selection, heat dissipation, vibration control, and structural integrity. Electromechanical Systems - Working knowledge of how mechanical components interact with electrical systems, including insulating materials, creepage/clearance distances, and thermal management. CAD - Proficiency in SolidWorks (ideally) or Creo Manufacturing & Materials - Extensive experience in Injection moulding - Understanding of materials suitable for high-voltage applications (PPS / PAGF) High-Voltage Insulation & Safety - Expertise in managing electrical safety risks (dialectic, hi-pot, arcing etc) Risk Assessment & Failure Mode Analysis - Experience in FMEA, DFMEA, and HAZOP to assess risks in high-voltage systems. Testing & Certification Requirements - Understanding of IP ratings, dielectric strength testing, thermal runaway testing, and partial discharge testing. Prototype Development & Testing - Ability to design, build, and test mechanical prototypes in controlled environments. Environmental & Endurance Testing - Familiarity with thermal cycling, humidity, vibration, and impact testing to ensure product reliability. Drawing & Eng Specification - Proficiency 2D drawings & assemblies, BOM management - working GD&T knowledge would be a bonus Our Culture At SharkNinja, we don't just raise the bar-we push past it every single day. Our Outrageously Extraordinary mindset drives us to tackle the impossible, push boundaries, and deliver results that others only dream of. If you thrive on breaking out of your swim lane, you'll be right at home. What We Offer We offer competitive health insurance, retirement plans, paid time off, employee stock purchase options, wellness programs, SharkNinja product discounts, and more. We empower your personal and professional growth with high impact Learning Programs featuring bold voices redefining what's possible. When you join, you're not just part of a company-you're part of an outrageously extraordinary community. To gether, we won't just launch products- we'll disrupt entire markets. At SharkNinja, Diversity, Equity, and Inclusion are vital to our global success. Valuing each unique voice and blending all of our diverse skills strengthens SharkNinja's innovation every day. We support ALL associates in bringing their authentic selves to work, making an impact, and having the opportunity for career acceleration. With help from our leadership, associates, and our community, we aim to have equity be a key component of the SharkNinja DNA. Learn more about us: Life At SharkNinja Outrageously Extraordinary SharkNinja's Candidate Privacy Notice can be found here: For candidates based in China, please visit: For candidates based in Vietnam, please visit: We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability, or any other class protected by legislation, and local law. SharkNinja will consider reasonable accommodations consistent with legislation, and local law. If you require a reasonable accommodation to participate in the job application or interview process, please contact SharkNinja People & Culture at
First Military Recruitment Ltd
Gloucester, Gloucestershire
AR775 - Gate Service Engineer Salary: Upto 38,000 Location: Gloucestershire & Surrounding Counties Overview: First Military Recruitment are currently seeking a Field Service Gate Engineer on behalf of one of our clients. You will be responsible for carrying out planned and reactive maintenance on clients automation systems. This is a full-time position, consisting of 40 hours per week including a 30-minute lunch break. The working hours are primarily Monday to Friday, from 0800 to 1630. The successful candidate may be required to work beyond these hours if the job demands it. The role is primarily based in the field, with occasional work required at the company s office or other locations as needed. Our client encourages applications from ex-military personnel however all candidates will be given due consideration. Duties and Responsibilities: Perform planned maintenance and repairs on automated gates, barriers, bollards and garage doors. Carry out fault finding and reactive maintenance on the above systems. Install and troubleshoot intercom systems. Perform any other duties that the company deems the Service Engineer competent to carry out. Attend both in-house and manufacturer training sessions. Complete all necessary paperwork electronically. Adhere to all health and safety guidelines to ensure personal and team safety. Effectively manage time on jobs to ensure maximum efficiency. Communicate job progression with operations team. Share best practices and knowledge with other team members. Promote a positive company image at all times. Report to Line Manager. Skills and Qualifications: Full / valid manual driving licence is essential. At least 2 years of experience in a similar role, or 1 year in a role comprising of electrical or mechanical maintenance. Interests or hobbies within electrical or mechanical activities will also be considered with evidence. Ability to work outdoors in all weather conditions. Logical problem-solving skills. Technical aptitude. Enthusiastic, adaptable and ready for a challenge. Able to plan and work independently. Competent communicator, willing to liaise with staff and clients. Respects others and has a positive attitude toward diversity. Willingness to learn and build on existing skills. Basic welding skills preferred but not essential. Benefits: A competitive salary depending on experience. Company supplied van with fuel card equipped with job-specific tools, ensuring that you have everything you need to complete your work effectively and efficiently. Company phone and tablet, allowing you to stay connected with colleagues and access necessary resources while on the go. Manufacturer training to help you stay up to date with the latest techniques and technologies in the industry. Opportunity to work outdoors, enjoying the fresh air and freedom that comes with working in the field. Salary: Upto 38,000 Location: Gloucestershire & Surrounding Counties
Sep 10, 2025
Full time
AR775 - Gate Service Engineer Salary: Upto 38,000 Location: Gloucestershire & Surrounding Counties Overview: First Military Recruitment are currently seeking a Field Service Gate Engineer on behalf of one of our clients. You will be responsible for carrying out planned and reactive maintenance on clients automation systems. This is a full-time position, consisting of 40 hours per week including a 30-minute lunch break. The working hours are primarily Monday to Friday, from 0800 to 1630. The successful candidate may be required to work beyond these hours if the job demands it. The role is primarily based in the field, with occasional work required at the company s office or other locations as needed. Our client encourages applications from ex-military personnel however all candidates will be given due consideration. Duties and Responsibilities: Perform planned maintenance and repairs on automated gates, barriers, bollards and garage doors. Carry out fault finding and reactive maintenance on the above systems. Install and troubleshoot intercom systems. Perform any other duties that the company deems the Service Engineer competent to carry out. Attend both in-house and manufacturer training sessions. Complete all necessary paperwork electronically. Adhere to all health and safety guidelines to ensure personal and team safety. Effectively manage time on jobs to ensure maximum efficiency. Communicate job progression with operations team. Share best practices and knowledge with other team members. Promote a positive company image at all times. Report to Line Manager. Skills and Qualifications: Full / valid manual driving licence is essential. At least 2 years of experience in a similar role, or 1 year in a role comprising of electrical or mechanical maintenance. Interests or hobbies within electrical or mechanical activities will also be considered with evidence. Ability to work outdoors in all weather conditions. Logical problem-solving skills. Technical aptitude. Enthusiastic, adaptable and ready for a challenge. Able to plan and work independently. Competent communicator, willing to liaise with staff and clients. Respects others and has a positive attitude toward diversity. Willingness to learn and build on existing skills. Basic welding skills preferred but not essential. Benefits: A competitive salary depending on experience. Company supplied van with fuel card equipped with job-specific tools, ensuring that you have everything you need to complete your work effectively and efficiently. Company phone and tablet, allowing you to stay connected with colleagues and access necessary resources while on the go. Manufacturer training to help you stay up to date with the latest techniques and technologies in the industry. Opportunity to work outdoors, enjoying the fresh air and freedom that comes with working in the field. Salary: Upto 38,000 Location: Gloucestershire & Surrounding Counties
Electrical Architect 6 month contract Based in Stevenage Offering circa £80ph Inside IR35 Do you have experience designing Electrical/Electronic systems? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Architect, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Responsible for the electrical architecture and requirements for products System electrical requirements Interface definitions and characteristics between subsystems/equipment Power architecture, including power budget and power profiles Data communication and processing architecture Requirements for EMC, bonding, grounding and screening Signal safety, including routing of safety-related signals Your skillset may include: Electrical/electronics experience Interface definitions Knowledge of defence/industry standards Systems engineering Writing reports Power supplies Actuators Data communication Sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electrical Architect 6 month contract Based in Stevenage Offering circa £80ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Sep 10, 2025
Full time
Electrical Architect 6 month contract Based in Stevenage Offering circa £80ph Inside IR35 Do you have experience designing Electrical/Electronic systems? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Architect, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Responsible for the electrical architecture and requirements for products System electrical requirements Interface definitions and characteristics between subsystems/equipment Power architecture, including power budget and power profiles Data communication and processing architecture Requirements for EMC, bonding, grounding and screening Signal safety, including routing of safety-related signals Your skillset may include: Electrical/electronics experience Interface definitions Knowledge of defence/industry standards Systems engineering Writing reports Power supplies Actuators Data communication Sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electrical Architect 6 month contract Based in Stevenage Offering circa £80ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Are you an experienced Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: A good understanding of measurement and test principles, and associated equipment down to component level Awareness of electrical/electronic sub-system and system design, integration, and test principles. An understanding of RF and microwave technology at subsystem level An understanding of Environmental testing (including ESS) Manual handling training ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Sep 10, 2025
Full time
Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Are you an experienced Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Providing test engineering support to operators on the shopfloor Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information Identify remedial and corrective actions Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: A good understanding of measurement and test principles, and associated equipment down to component level Awareness of electrical/electronic sub-system and system design, integration, and test principles. An understanding of RF and microwave technology at subsystem level An understanding of Environmental testing (including ESS) Manual handling training ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
THE MARINE SOCIETY AND SEA CADETS
Gosport, Hampshire
Job Title: Offshore Maintenance Manager Location: Gosport, Hampshire Salary: £36,500 - £39,000 per annum, dependent upon experience Job type: Full time, Permanent Closing Date: 7th October 2025. Are you an experienced Marine Engineer looking for a new opportunity? The Marine Society & Sea Cadets (MSSC) is a vibrant and growing charity delivering life changing nautical adventure for young people through the Sea Cadets to give them the best possible head start in life. We also provide personal and professional development opportunities for seafarers with the Marine Society. Working with our staff, cadets, and volunteers, we have built a vision and five-year strategy to take us forward and further improve the astounding contribution already made through our work to the lives of thousands of young people and seafarers, while fully supporting our volunteers who are vital to our success. We are currently looking for an Offshore Maintenance Manager to join our team. About the role: The Offshore Maintenance Manager will have a key role in delivering the capability and availability of MSSC's offshore vessels to provide sea-going experience for cadets and in ensuring the safety for all personnel on board. The main purpose of the role is to provide support with the engineering management and maintenance of MSSC's offshore vessels. Responsibilities: Providing day to day support in identifying defects and safety shortcomings, determining solutions, assisting in rectification or organising cost effective professional repairs at advantageous prices and obtaining replacement parts. Producing, overseeing and tracking (technically and financially) the winter maintenance work packages for the fleet. Progressive development of MSSC's Safety Management System, as related to the technical running and management of each offshore vessel. Assisting the engineer officers of MSSC's vessels with maintenance tasks. Managing records to support and evidence MSSC's maintenance programme. Acting as an occasional relief engineer on board any of the three larger vessels. Requirements: Engineer with HNC or similar professional qualification with significant experience in the maritime sector in seagoing and shore support roles. Areas of experience would include health and safety, marine equipment operation, engineering maintenance, refit planning and execution. Ideally a broad engineering experience across the mechanical, electrical and electronic disciplines. Knowledge of typical small commercial or recreational vessel machinery, control, navigation and communications systems and their integration. Experience in using and managing Electronic Planned Maintenance Systems. Experience of routine and effective liaison with ship and shore staff, external authorities, suppliers and contractors. Health and fitness necessary to obtain and industry recognised medical certification (ENG1). Desirable: Power and sail background ideally across a variety of vessels including those Experience with maintaining vessels in Lloyd's or other recognised Classification Society Rules and Flag State "Code of Practice." Experience working with young people. Benefits: 25 working days pro rata of paid holiday per annum, plus public and bank holidays observed in England and Wales, increasing to 29 days after two years' service. Life assurance (4x salary) for those who opt to join the pension scheme. Private medical insurance. Pension (employer contribution up to 10%). Wellbeing portal and EAP with 121 counselling. Employee development: We are investing in our employees' development and have an annual calendar of learning and development opportunities, designed to support employees to develop into their roles and stretch them to achieve their full potential. National staff conference: All employees come together once a year to reflect on the past year and celebrate success at our offsite staff conference. This is a great opportunity to listen to employees' views, and for employees to network, share information and socialise. If you are interested in this Offshore Maintenance Manager vacancy, please apply now! Please click APPLY to be redirected to our website to complete your application. Candidates with the relevant experience or job titles of: Maritime Engineer, Maintenance Technician, Maintenance Coordinator, Facilities Technician, Maintenance Supervisor, Estates Management may also be considered for this role.
Sep 10, 2025
Full time
Job Title: Offshore Maintenance Manager Location: Gosport, Hampshire Salary: £36,500 - £39,000 per annum, dependent upon experience Job type: Full time, Permanent Closing Date: 7th October 2025. Are you an experienced Marine Engineer looking for a new opportunity? The Marine Society & Sea Cadets (MSSC) is a vibrant and growing charity delivering life changing nautical adventure for young people through the Sea Cadets to give them the best possible head start in life. We also provide personal and professional development opportunities for seafarers with the Marine Society. Working with our staff, cadets, and volunteers, we have built a vision and five-year strategy to take us forward and further improve the astounding contribution already made through our work to the lives of thousands of young people and seafarers, while fully supporting our volunteers who are vital to our success. We are currently looking for an Offshore Maintenance Manager to join our team. About the role: The Offshore Maintenance Manager will have a key role in delivering the capability and availability of MSSC's offshore vessels to provide sea-going experience for cadets and in ensuring the safety for all personnel on board. The main purpose of the role is to provide support with the engineering management and maintenance of MSSC's offshore vessels. Responsibilities: Providing day to day support in identifying defects and safety shortcomings, determining solutions, assisting in rectification or organising cost effective professional repairs at advantageous prices and obtaining replacement parts. Producing, overseeing and tracking (technically and financially) the winter maintenance work packages for the fleet. Progressive development of MSSC's Safety Management System, as related to the technical running and management of each offshore vessel. Assisting the engineer officers of MSSC's vessels with maintenance tasks. Managing records to support and evidence MSSC's maintenance programme. Acting as an occasional relief engineer on board any of the three larger vessels. Requirements: Engineer with HNC or similar professional qualification with significant experience in the maritime sector in seagoing and shore support roles. Areas of experience would include health and safety, marine equipment operation, engineering maintenance, refit planning and execution. Ideally a broad engineering experience across the mechanical, electrical and electronic disciplines. Knowledge of typical small commercial or recreational vessel machinery, control, navigation and communications systems and their integration. Experience in using and managing Electronic Planned Maintenance Systems. Experience of routine and effective liaison with ship and shore staff, external authorities, suppliers and contractors. Health and fitness necessary to obtain and industry recognised medical certification (ENG1). Desirable: Power and sail background ideally across a variety of vessels including those Experience with maintaining vessels in Lloyd's or other recognised Classification Society Rules and Flag State "Code of Practice." Experience working with young people. Benefits: 25 working days pro rata of paid holiday per annum, plus public and bank holidays observed in England and Wales, increasing to 29 days after two years' service. Life assurance (4x salary) for those who opt to join the pension scheme. Private medical insurance. Pension (employer contribution up to 10%). Wellbeing portal and EAP with 121 counselling. Employee development: We are investing in our employees' development and have an annual calendar of learning and development opportunities, designed to support employees to develop into their roles and stretch them to achieve their full potential. National staff conference: All employees come together once a year to reflect on the past year and celebrate success at our offsite staff conference. This is a great opportunity to listen to employees' views, and for employees to network, share information and socialise. If you are interested in this Offshore Maintenance Manager vacancy, please apply now! Please click APPLY to be redirected to our website to complete your application. Candidates with the relevant experience or job titles of: Maritime Engineer, Maintenance Technician, Maintenance Coordinator, Facilities Technician, Maintenance Supervisor, Estates Management may also be considered for this role.
Job title: Senior EMC Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Specify and manage requirements and acceptance criteria specific to a system, platforms, or programmes Advising design teams on Electromagnetic Environment (EME) requirements and design considerations Liaising with EMC test engineers to design and specify testing regimes to prove system compliance against relevant standards Designing and implementing system mitigation to meet EMC standards Your skills and experiences: BEng (Hons) / MEng or equivalent qualification Experience of design for EMC compliance Knowledge of EMC Defence Standards would be an advantage Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The EMC Engineering team: Working within Electrical Engineering (EMC), you will be responsible for providing support to the Engineering Manager and/or external specialists in providing transversal support to engineering delivery teams in defining electromagnetic requirements and undertaking specialist testing of systems, sub systems and components in support of achieving contractual compliance for EMC design. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 10, 2025
Full time
Job title: Senior EMC Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Specify and manage requirements and acceptance criteria specific to a system, platforms, or programmes Advising design teams on Electromagnetic Environment (EME) requirements and design considerations Liaising with EMC test engineers to design and specify testing regimes to prove system compliance against relevant standards Designing and implementing system mitigation to meet EMC standards Your skills and experiences: BEng (Hons) / MEng or equivalent qualification Experience of design for EMC compliance Knowledge of EMC Defence Standards would be an advantage Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The EMC Engineering team: Working within Electrical Engineering (EMC), you will be responsible for providing support to the Engineering Manager and/or external specialists in providing transversal support to engineering delivery teams in defining electromagnetic requirements and undertaking specialist testing of systems, sub systems and components in support of achieving contractual compliance for EMC design. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job title: Senior EMC Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Specify and manage requirements and acceptance criteria specific to a system, platforms, or programmes Advising design teams on Electromagnetic Environment (EME) requirements and design considerations Liaising with EMC test engineers to design and specify testing regimes to prove system compliance against relevant standards Designing and implementing system mitigation to meet EMC standards Your skills and experiences: BEng (Hons) / MEng or equivalent qualification Experience of design for EMC compliance Knowledge of EMC Defence Standards would be an advantage Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The EMC Engineering team: Working within Electrical Engineering (EMC), you will be responsible for providing support to the Engineering Manager and/or external specialists in providing transversal support to engineering delivery teams in defining electromagnetic requirements and undertaking specialist testing of systems, sub systems and components in support of achieving contractual compliance for EMC design. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 10, 2025
Full time
Job title: Senior EMC Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: Specify and manage requirements and acceptance criteria specific to a system, platforms, or programmes Advising design teams on Electromagnetic Environment (EME) requirements and design considerations Liaising with EMC test engineers to design and specify testing regimes to prove system compliance against relevant standards Designing and implementing system mitigation to meet EMC standards Your skills and experiences: BEng (Hons) / MEng or equivalent qualification Experience of design for EMC compliance Knowledge of EMC Defence Standards would be an advantage Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave incentive and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The EMC Engineering team: Working within Electrical Engineering (EMC), you will be responsible for providing support to the Engineering Manager and/or external specialists in providing transversal support to engineering delivery teams in defining electromagnetic requirements and undertaking specialist testing of systems, sub systems and components in support of achieving contractual compliance for EMC design. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 10th September 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users.Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals.With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals.Technical and legal clarifications of RFQs and terms and conditions.Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are metMeet sales targets including cash flow, profitability and project budgetsMaintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership teamProspect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecastsTarget key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project teamReviewing and commenting on detailed contractual and technical RFQ specificationsPrepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineeringPresent commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customerParticipation in Public TendersCreate forecasts and track hot prospectsMarketing of the mtu KPP rangeParticipate and represent mtu at local industry conferences, seminars, and trade showsTravel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience.Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goodsGCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
Sep 10, 2025
Full time
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users.Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals.With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals.Technical and legal clarifications of RFQs and terms and conditions.Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are metMeet sales targets including cash flow, profitability and project budgetsMaintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership teamProspect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecastsTarget key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project teamReviewing and commenting on detailed contractual and technical RFQ specificationsPrepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineeringPresent commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customerParticipation in Public TendersCreate forecasts and track hot prospectsMarketing of the mtu KPP rangeParticipate and represent mtu at local industry conferences, seminars, and trade showsTravel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience.Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goodsGCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users.Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals.With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals.Technical and legal clarifications of RFQs and terms and conditions.Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are metMeet sales targets including cash flow, profitability and project budgetsMaintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership teamProspect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecastsTarget key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project teamReviewing and commenting on detailed contractual and technical RFQ specificationsPrepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineeringPresent commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customerParticipation in Public TendersCreate forecasts and track hot prospectsMarketing of the mtu KPP rangeParticipate and represent mtu at local industry conferences, seminars, and trade showsTravel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience.Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goodsGCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
Sep 10, 2025
Full time
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users.Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals.With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals.Technical and legal clarifications of RFQs and terms and conditions.Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are metMeet sales targets including cash flow, profitability and project budgetsMaintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership teamProspect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecastsTarget key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project teamReviewing and commenting on detailed contractual and technical RFQ specificationsPrepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineeringPresent commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customerParticipation in Public TendersCreate forecasts and track hot prospectsMarketing of the mtu KPP rangeParticipate and represent mtu at local industry conferences, seminars, and trade showsTravel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience.Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goodsGCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users. Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals. With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals. Technical and legal clarifications of RFQs and terms and conditions. Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are met Meet sales targets including cash flow, profitability and project budgets Maintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership team Prospect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecasts Target key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project team Reviewing and commenting on detailed contractual and technical RFQ specifications Prepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineering Present commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customer Participation in Public Tenders Create forecasts and track hot prospects Marketing of the mtu KPP range Participate and represent mtu at local industry conferences, seminars, and trade shows Travel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience. Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goods GCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
Sep 10, 2025
Full time
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users. Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals. With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals. Technical and legal clarifications of RFQs and terms and conditions. Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are met Meet sales targets including cash flow, profitability and project budgets Maintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership team Prospect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecasts Target key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project team Reviewing and commenting on detailed contractual and technical RFQ specifications Prepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineering Present commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customer Participation in Public Tenders Create forecasts and track hot prospects Marketing of the mtu KPP range Participate and represent mtu at local industry conferences, seminars, and trade shows Travel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience. Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goods GCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
Job title: Principal Engineer - Electrical Engineering (Power) Location: Coventry. (Hybrid - 1 day a week / 1 day a fortnight on site) Dependent on business needs. Salary: Up to £61,500 (Commensurate with skills and experience) What you'll be doing: Design and develop solutions to a range of common design situations/problems using NX Understand and apply a range of fundamental design processes, tools, systems and techniques Develop and produce ways of working within NX to provide design intent Work as a member of a multi-functional team created to accomplish tasks (e.g. Capgemini, Siemens, IBM and SSNA) Begin to schedule own work to meet target time scales and budget demand using tools and techniques with guidance from their supervisor Continually seek ways to improve, processes, toolsets, systems, techniques and the generic workplace Take an active role in high risk and high complexity tasks with low-risk involvement, supported by the project leader or equivalent Your skills and experiences: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Experience of working within a relevant Engineering role to industry codes and standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Coventry team: The team supports the Engineering Manager and external specialists during development and analysis of platform power systems. The Principal Engineer shall act as team lead, managing the day-to-day activities of the team and the production of deliverables. The Principal Engineer shall be responsible for developing and maintaining the competency and skills of the team, project plan and schedule project activities, while managing the resolution of any related issues. We offer relocation packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Sep 10, 2025
Full time
Job title: Principal Engineer - Electrical Engineering (Power) Location: Coventry. (Hybrid - 1 day a week / 1 day a fortnight on site) Dependent on business needs. Salary: Up to £61,500 (Commensurate with skills and experience) What you'll be doing: Design and develop solutions to a range of common design situations/problems using NX Understand and apply a range of fundamental design processes, tools, systems and techniques Develop and produce ways of working within NX to provide design intent Work as a member of a multi-functional team created to accomplish tasks (e.g. Capgemini, Siemens, IBM and SSNA) Begin to schedule own work to meet target time scales and budget demand using tools and techniques with guidance from their supervisor Continually seek ways to improve, processes, toolsets, systems, techniques and the generic workplace Take an active role in high risk and high complexity tasks with low-risk involvement, supported by the project leader or equivalent Your skills and experiences: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Experience of working within a relevant Engineering role to industry codes and standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Coventry team: The team supports the Engineering Manager and external specialists during development and analysis of platform power systems. The Principal Engineer shall act as team lead, managing the day-to-day activities of the team and the production of deliverables. The Principal Engineer shall be responsible for developing and maintaining the competency and skills of the team, project plan and schedule project activities, while managing the resolution of any related issues. We offer relocation packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 12th October 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Description Production Engineer - Rail Key Responsibilities: • Perform maintenance and repair tasks on series 1600 and 4000 applications in accordance with the working manual, with opportunities to support other business units in the field as required. • Assist in the assembly and preparation of 199 and 2000 applications, as required. • Demonstrate relevant technical knowledge to support troubleshooting and diagnostics of different applications. • Conduct engine and component inspections and cleaning as required. • Identify opportunities for cost reduction and efficiency improvements in operations. • Collaborate with the lean team to identify and implement process improvements. • Utilize special tools and measuring equipment as necessary. • Complete relevant process documentation as required. • Comply with all health and safety regulations. • Foster a positive work environment that encourages teamwork and collaboration. • Maintain high standards of cleanliness and housekeeping in all production and shopfloor areas and facilities. • Manoeuvre products and materials using plant machinery in accordance with assigned competencies. • Attend training courses as required to enhance job performance. • Maintain a monthly utilization rate of 85% or higher. • Be responsible for ticket management, ensuring the accurate recording of material and labour hours for job-related tickets assigned to you. Prioritize the completion of these tickets, including C4S tickets, before engine and powerpack applications depart. Ensure all tasks are promptly completed and submitted, adhering to established standards while remaining compliant. • Undertake any other production or facilities-related activities as reasonably required by the Operations Manager, Supervisor, or Team Leader. Personality / Job Skills: • Skilled in maintenance and repairs with a strong technical background. • Proficient in basic troubleshooting and diagnostic methods. • Ability to identify ways to save money and improve efficiency. • Excellent teamwork skills and ability to foster a positive work environment. • Organized, with a keen attention to cleanliness on the shopfloor and the wider facility. • Takes ownership and demonstrates accountability for task completion. • Capable of safely operating machinery. • Responsible, reliable, and dependable in completing tasks on time. • Note: This job is physically demanding. Computer Skills: • Computer literate with proficient keyboard skills and knowledge of both Windows and IOS based systems. • On-the-job training will be provided for SAP C4S, 3C's, MTU Go!Care and MTU Business Portal. Requirements: Language: Must be fluent in both written and spoken English. NVQ Level 3 in Engineering - with Electrical and Mechanical experience literacy and Numeracy: Must be competent in both. Must possess a full, clean driving license and be a UK passport holder Experience driving forklift/tow truck and crane operation is preferable, although training will be provided. Type of Contract PermanentPandoLogic.
Sep 10, 2025
Full time
Job Description Production Engineer - Rail Key Responsibilities: • Perform maintenance and repair tasks on series 1600 and 4000 applications in accordance with the working manual, with opportunities to support other business units in the field as required. • Assist in the assembly and preparation of 199 and 2000 applications, as required. • Demonstrate relevant technical knowledge to support troubleshooting and diagnostics of different applications. • Conduct engine and component inspections and cleaning as required. • Identify opportunities for cost reduction and efficiency improvements in operations. • Collaborate with the lean team to identify and implement process improvements. • Utilize special tools and measuring equipment as necessary. • Complete relevant process documentation as required. • Comply with all health and safety regulations. • Foster a positive work environment that encourages teamwork and collaboration. • Maintain high standards of cleanliness and housekeeping in all production and shopfloor areas and facilities. • Manoeuvre products and materials using plant machinery in accordance with assigned competencies. • Attend training courses as required to enhance job performance. • Maintain a monthly utilization rate of 85% or higher. • Be responsible for ticket management, ensuring the accurate recording of material and labour hours for job-related tickets assigned to you. Prioritize the completion of these tickets, including C4S tickets, before engine and powerpack applications depart. Ensure all tasks are promptly completed and submitted, adhering to established standards while remaining compliant. • Undertake any other production or facilities-related activities as reasonably required by the Operations Manager, Supervisor, or Team Leader. Personality / Job Skills: • Skilled in maintenance and repairs with a strong technical background. • Proficient in basic troubleshooting and diagnostic methods. • Ability to identify ways to save money and improve efficiency. • Excellent teamwork skills and ability to foster a positive work environment. • Organized, with a keen attention to cleanliness on the shopfloor and the wider facility. • Takes ownership and demonstrates accountability for task completion. • Capable of safely operating machinery. • Responsible, reliable, and dependable in completing tasks on time. • Note: This job is physically demanding. Computer Skills: • Computer literate with proficient keyboard skills and knowledge of both Windows and IOS based systems. • On-the-job training will be provided for SAP C4S, 3C's, MTU Go!Care and MTU Business Portal. Requirements: Language: Must be fluent in both written and spoken English. NVQ Level 3 in Engineering - with Electrical and Mechanical experience literacy and Numeracy: Must be competent in both. Must possess a full, clean driving license and be a UK passport holder Experience driving forklift/tow truck and crane operation is preferable, although training will be provided. Type of Contract PermanentPandoLogic.
Job Description Production Engineer - Rail Key Responsibilities: • Perform maintenance and repair tasks on series 1600 and 4000 applications in accordance with the working manual, with opportunities to support other business units in the field as required. • Assist in the assembly and preparation of 199 and 2000 applications, as required. • Demonstrate relevant technical knowledge to support troubleshooting and diagnostics of different applications. • Conduct engine and component inspections and cleaning as required. • Identify opportunities for cost reduction and efficiency improvements in operations. • Collaborate with the lean team to identify and implement process improvements. • Utilize special tools and measuring equipment as necessary. • Complete relevant process documentation as required. • Comply with all health and safety regulations. • Foster a positive work environment that encourages teamwork and collaboration. • Maintain high standards of cleanliness and housekeeping in all production and shopfloor areas and facilities. • Manoeuvre products and materials using plant machinery in accordance with assigned competencies. • Attend training courses as required to enhance job performance. • Maintain a monthly utilization rate of 85% or higher. • Be responsible for ticket management, ensuring the accurate recording of material and labour hours for job-related tickets assigned to you. Prioritize the completion of these tickets, including C4S tickets, before engine and powerpack applications depart. Ensure all tasks are promptly completed and submitted, adhering to established standards while remaining compliant. • Undertake any other production or facilities-related activities as reasonably required by the Operations Manager, Supervisor, or Team Leader. Personality / Job Skills: • Skilled in maintenance and repairs with a strong technical background. • Proficient in basic troubleshooting and diagnostic methods. • Ability to identify ways to save money and improve efficiency. • Excellent teamwork skills and ability to foster a positive work environment. • Organized, with a keen attention to cleanliness on the shopfloor and the wider facility. • Takes ownership and demonstrates accountability for task completion. • Capable of safely operating machinery. • Responsible, reliable, and dependable in completing tasks on time. • Note: This job is physically demanding. Computer Skills: • Computer literate with proficient keyboard skills and knowledge of both Windows and IOS based systems. • On-the-job training will be provided for SAP C4S, 3C's, MTU Go!Care and MTU Business Portal. Requirements: Language: Must be fluent in both written and spoken English. NVQ Level 3 in Engineering - with Electrical and Mechanical experience literacy and Numeracy: Must be competent in both. Must possess a full, clean driving license and be a UK passport holder Experience driving forklift/tow truck and crane operation is preferable, although training will be provided. Type of Contract PermanentPandoLogic.
Sep 10, 2025
Full time
Job Description Production Engineer - Rail Key Responsibilities: • Perform maintenance and repair tasks on series 1600 and 4000 applications in accordance with the working manual, with opportunities to support other business units in the field as required. • Assist in the assembly and preparation of 199 and 2000 applications, as required. • Demonstrate relevant technical knowledge to support troubleshooting and diagnostics of different applications. • Conduct engine and component inspections and cleaning as required. • Identify opportunities for cost reduction and efficiency improvements in operations. • Collaborate with the lean team to identify and implement process improvements. • Utilize special tools and measuring equipment as necessary. • Complete relevant process documentation as required. • Comply with all health and safety regulations. • Foster a positive work environment that encourages teamwork and collaboration. • Maintain high standards of cleanliness and housekeeping in all production and shopfloor areas and facilities. • Manoeuvre products and materials using plant machinery in accordance with assigned competencies. • Attend training courses as required to enhance job performance. • Maintain a monthly utilization rate of 85% or higher. • Be responsible for ticket management, ensuring the accurate recording of material and labour hours for job-related tickets assigned to you. Prioritize the completion of these tickets, including C4S tickets, before engine and powerpack applications depart. Ensure all tasks are promptly completed and submitted, adhering to established standards while remaining compliant. • Undertake any other production or facilities-related activities as reasonably required by the Operations Manager, Supervisor, or Team Leader. Personality / Job Skills: • Skilled in maintenance and repairs with a strong technical background. • Proficient in basic troubleshooting and diagnostic methods. • Ability to identify ways to save money and improve efficiency. • Excellent teamwork skills and ability to foster a positive work environment. • Organized, with a keen attention to cleanliness on the shopfloor and the wider facility. • Takes ownership and demonstrates accountability for task completion. • Capable of safely operating machinery. • Responsible, reliable, and dependable in completing tasks on time. • Note: This job is physically demanding. Computer Skills: • Computer literate with proficient keyboard skills and knowledge of both Windows and IOS based systems. • On-the-job training will be provided for SAP C4S, 3C's, MTU Go!Care and MTU Business Portal. Requirements: Language: Must be fluent in both written and spoken English. NVQ Level 3 in Engineering - with Electrical and Mechanical experience literacy and Numeracy: Must be competent in both. Must possess a full, clean driving license and be a UK passport holder Experience driving forklift/tow truck and crane operation is preferable, although training will be provided. Type of Contract PermanentPandoLogic.
Job Title: Engineering Supervisor Location: Moorgate, London Start Date: 22nd September 2025 Duration: 1 Month (Fixed-Term Contract) Pay: £18-20 per hour Working Hours: Monday - Friday, 8:00 AM - 5:00 PM Contract Details Start Date: 22nd September 2025 End Date: 21st October 2025 (1 month duration) Working Hours: Monday - Friday, 8:00 AM - 5:00 PM Location: Moorgate, London Role Overview We are seeking an experienced Engineering Supervisor to join our team on a 1-month fixed-term contract based at our Moorgate site. Reporting directly to the Technical Account Manager, this role deputises in their absence and is pivotal to the MEP operational delivery within a critical facility . You will be responsible for supervising the engineering team, managing day-to-day MEP activities (planned, reactive, and corrective), and ensuring 100% critical facilities uptime and compliance . The role requires strong leadership, technical expertise, and the ability to drive operational excellence in a demanding environment. Key Responsibilities Supervise, lead, and coordinate the engineering team, ensuring delivery of all contractual outcomes and MEP services. Operate building systems (including HV/LV switching operations) safely and efficiently, producing technical reports where required. Manage and monitor planned, reactive, and corrective works via the Corrigo CMMS system. Oversee and manage Specialist Vendor visits, ensuring quality checks, compliance, and remedial actions are addressed. Attend and contribute to client and operations meetings, deputising for the Technical Account Manager when needed. Ensure compliance with statutory regulations, company processes, and health & safety requirements. Maintain accurate records including logbooks, asset databases, and electronic O&M systems. Monitor utilities usage, identify abnormalities, and suggest energy-saving initiatives. Lead and motivate the team to deliver exceptional service and maintain high operational standards. Manage performance appraisals, training, and succession planning for direct reports. Provide support during emergency situations, including temporary shift cover where required. Personal Specification Essential Skills & Experience: Previous experience in critical environments (Banking HQ, Data Centres, or similar). Strong technical background in Mechanical & Electrical (M&E) systems. HV/LV Authorised Person (or ability to obtain). Completed apprenticeship with Electrical/Mechanical Engineering HNC/HND. City & Guilds Parts 1 & 2 (or equivalent/higher). 18th Edition IEE Wiring & Installation qualification. IOSH Managing Safely (or NEBOSH equivalent). Proven ability to lead and motivate engineering teams . Excellent communication, IT, and report-writing skills. Calm under pressure, proactive, and solutions-focused. Desirable: Experience in managing Specialist Vendors. Strong knowledge of compliance frameworks and safe systems of work. Enthusiastic, professional, and customer-focused with a collaborative approach. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Sep 10, 2025
Full time
Job Title: Engineering Supervisor Location: Moorgate, London Start Date: 22nd September 2025 Duration: 1 Month (Fixed-Term Contract) Pay: £18-20 per hour Working Hours: Monday - Friday, 8:00 AM - 5:00 PM Contract Details Start Date: 22nd September 2025 End Date: 21st October 2025 (1 month duration) Working Hours: Monday - Friday, 8:00 AM - 5:00 PM Location: Moorgate, London Role Overview We are seeking an experienced Engineering Supervisor to join our team on a 1-month fixed-term contract based at our Moorgate site. Reporting directly to the Technical Account Manager, this role deputises in their absence and is pivotal to the MEP operational delivery within a critical facility . You will be responsible for supervising the engineering team, managing day-to-day MEP activities (planned, reactive, and corrective), and ensuring 100% critical facilities uptime and compliance . The role requires strong leadership, technical expertise, and the ability to drive operational excellence in a demanding environment. Key Responsibilities Supervise, lead, and coordinate the engineering team, ensuring delivery of all contractual outcomes and MEP services. Operate building systems (including HV/LV switching operations) safely and efficiently, producing technical reports where required. Manage and monitor planned, reactive, and corrective works via the Corrigo CMMS system. Oversee and manage Specialist Vendor visits, ensuring quality checks, compliance, and remedial actions are addressed. Attend and contribute to client and operations meetings, deputising for the Technical Account Manager when needed. Ensure compliance with statutory regulations, company processes, and health & safety requirements. Maintain accurate records including logbooks, asset databases, and electronic O&M systems. Monitor utilities usage, identify abnormalities, and suggest energy-saving initiatives. Lead and motivate the team to deliver exceptional service and maintain high operational standards. Manage performance appraisals, training, and succession planning for direct reports. Provide support during emergency situations, including temporary shift cover where required. Personal Specification Essential Skills & Experience: Previous experience in critical environments (Banking HQ, Data Centres, or similar). Strong technical background in Mechanical & Electrical (M&E) systems. HV/LV Authorised Person (or ability to obtain). Completed apprenticeship with Electrical/Mechanical Engineering HNC/HND. City & Guilds Parts 1 & 2 (or equivalent/higher). 18th Edition IEE Wiring & Installation qualification. IOSH Managing Safely (or NEBOSH equivalent). Proven ability to lead and motivate engineering teams . Excellent communication, IT, and report-writing skills. Calm under pressure, proactive, and solutions-focused. Desirable: Experience in managing Specialist Vendors. Strong knowledge of compliance frameworks and safe systems of work. Enthusiastic, professional, and customer-focused with a collaborative approach. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users. Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals. With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals. Technical and legal clarifications of RFQs and terms and conditions. Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are met Meet sales targets including cash flow, profitability and project budgets Maintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership team Prospect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecasts Target key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project team Reviewing and commenting on detailed contractual and technical RFQ specifications Prepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineering Present commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customer Participation in Public Tenders Create forecasts and track hot prospects Marketing of the mtu KPP range Participate and represent mtu at local industry conferences, seminars, and trade shows Travel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience. Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goods GCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
Sep 10, 2025
Full time
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users. Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals. With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals. Technical and legal clarifications of RFQs and terms and conditions. Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are met Meet sales targets including cash flow, profitability and project budgets Maintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership team Prospect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecasts Target key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project team Reviewing and commenting on detailed contractual and technical RFQ specifications Prepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineering Present commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customer Participation in Public Tenders Create forecasts and track hot prospects Marketing of the mtu KPP range Participate and represent mtu at local industry conferences, seminars, and trade shows Travel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience. Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goods GCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users. Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals. With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals. Technical and legal clarifications of RFQs and terms and conditions. Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are met Meet sales targets including cash flow, profitability and project budgets Maintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership team Prospect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecasts Target key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project team Reviewing and commenting on detailed contractual and technical RFQ specifications Prepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineering Present commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customer Participation in Public Tenders Create forecasts and track hot prospects Marketing of the mtu KPP range Participate and represent mtu at local industry conferences, seminars, and trade shows Travel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience. Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goods GCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
Sep 10, 2025
Full time
Job Description Solutions Sales Engineer - Kinetic PowerPack (KPP) Reports to: Senior Sales Manager - Solutions Job Summary: The role needs you to be tenacious, enthusiastic and comfortable with customer engagement at all levels with a "long-game" approach to sales & prospecting. A good understanding of the electrical infrastructure of a typical commercial building is key to the role which will involve: Securing new business with the design and sale of dynamic UPS (KPP) and power quality solutions to contractors, consulting engineers and end-users. Carrying out direct and indirect prospecting, along with intensive sales activities including preparation and presentation of integrated power supply solutions and proposals. With both UK and factory-based support, develop integrated electrical and mechanical solutions, cost calculations, total cost of ownership analysis, customer presentations and proposals. Technical and legal clarifications of RFQs and terms and conditions. Undertake direct customer relationship management and development of direct key accounts. Negotiate with customers to secure new business with company mandated profit margins and solid terms and conditions. Key Responsibilities: To promote a zero-harm culture by ensuring that all HSQE requirements are met Meet sales targets including cash flow, profitability and project budgets Maintain company CRM tools, providing regular activity reports and interacting with the sales management and leadership team Prospect new clients, create leads and manage existing client base to increase sales opportunities along with collection of data for business growth forecasts Target key consulting engineers, contractors and customers and support them during the sales process from conception through to order handover to the project team Reviewing and commenting on detailed contractual and technical RFQ specifications Prepare financial and technical proposals based on detailed cost calculations with the assistance of sales support and engineering Present commercial and technical proposals to customers, consultants and contractors and promote the power quality solution advantages developed specifically for the customer Participation in Public Tenders Create forecasts and track hot prospects Marketing of the mtu KPP range Participate and represent mtu at local industry conferences, seminars, and trade shows Travel to, attend and present at internal and external sales meetings This list is not exhaustive and may change. Person Profile: This position requires an enthusiastic person with good verbal and written communication skills who can communicate technical information often to non-technical stakeholders, including investors and potential customers. This person should be self-motivated, able to work to strict deadlines, and able to work both independently and as part of a team when required. The applicant must be qualified / conversant with mtu power generation products (or similar) and balance of plant associated with complete power generation systems along with the ability to understand mechanical and electrical drawings. The successful applicant will be required to travel within the UK & Ireland as required and may on occasion be required to spend time overseas including annual product training in Belgium / Germany. The role is a mixture of office based (in East Grinstead) and time spent on customer sites often working closely with other members of the wider Rolls-Royce Power Systems business. Computer Skills - Computer literate with good keyboard skills. Proficient in MS Office, particularly Word, Excel and email. On the job training will be provided for SAP, CEC & MTU Business Portal Driving Licence & Passport - Full and Clean Driving Licence, UK Passport Holder. Language - Must be fluent in both written and spoken English. Literacy and Numeracy - Must be a competent writer of business letters and emails. Qualifications - Appropriate qualifications in Mechanical or Electrical Engineering or similar relevant qualification or demonstrable industry experience. Proven background and success in technical sales of dynamic UPS systems, generator sets or switchgear or other technical capital goods GCSE English and Maths or equivalent. Type of Contract PermanentPandoLogic.
FRENCH SELECTION UK UK Sales Engineer - Power Plant Solutions Location: Remote in UK Ideally around the West Midland South of Birmingham, Northamptonshire, Home Counties Salary: up to £65,000 per annum plus Bonus Ref: 754PW To apply using our preferred format, please visit French Selection website, go to the vacancies page, search job reference: 754PW The company: Our Client is a leader in providing innovative, sustainable, and high-performance solutions across industries such as power generation, Nuclear, oil and gas, refining, and chemical manufacturing. They work closely with clients to deliver optimized operational efficiency and reduced environmental impact through customized engineering solutions. Main duties: As a Sales Engineer specializing in Power Plant Solutions, you will serve as both a technical expert and a project manager, coordinating solutions and on-site services to power plants, refineries, oil and gas facilities, and chemical plants. Operating as a dedicated consultant in your assigned territory, you will work closely with Sales Managers to manage and grow both existing and new projects. Reporting to the European Sales Manager, you will oversee solution design, project management, and technician deployment to ensure successful implementation and customer satisfaction. The role: - Act as a consultant for clients in power generation, refining, oil and gas, and chemical industries. - Manage existing accounts and pursue new projects in the UK and Ireland - Build client relationships by understanding technical and project needs to deliver tailored solutions. - Collaborate with Sales Managers to develop strategies, proposals, and presentations aligned with client requirements. - Work with engineering and R&D teams to design solutions that meet industry standards. - Develop technical proposals, including project scope, timelines, and budgets. - Assist in pricing and contract negotiations to align with client needs and company goals. - Manage project execution, from proposal to post-installation support. - Coordinate on-site technician deployments, ensuring quality and safety compliance. - Serve as the primary point of contact for clients and technicians, facilitating communication and troubleshooting. - Provide ongoing technical support and optimization to ensure client satisfaction. - Liaise between clients and technical teams to resolve issues and recommend improvements. - Conduct follow-up visits to ensure alignment with client expectations. - Stay informed on industry trends and regulatory requirements. - Support Sales Managers in identifying new opportunities and market expansion strategies. - Contribute to go-to-market strategies to drive growth and competitive advantage. The candidate: - Bachelor s degree in Mechanical, Electrical, Chemical Engineering, or a related technical field. - Experience in sales engineering, technical consulting, or project management, preferably in power generation - Strong understanding of power generation systems, combined cycle gas turbine, heat recovery steam generation, refining or chemical industries. - Experience managing end-to-end project delivery, including technician scheduling, on-site troubleshooting, and adherence to timelines. - Strong communication skills, with the ability to explain complex technical concepts to diverse audiences. - Ability to work cross-functionally and lead on-site technician teams to ensure smooth project execution. - Willingness to travel within the UK and overseas The salary: £65,000 per annum plus Bonus French Selection, leading UK-based consultancy specialising in the recruitment of bilingual and multilingual professionals for international business (industries and services). We are the leading recruitment consultancy for German, French, Italian and Spanish speaking positions. Also recruiting for positions with other languages such as Dutch, Polish, Portuguese, Scandinavian languages, Mandarin, Japanese and Arabic.
Sep 10, 2025
Full time
FRENCH SELECTION UK UK Sales Engineer - Power Plant Solutions Location: Remote in UK Ideally around the West Midland South of Birmingham, Northamptonshire, Home Counties Salary: up to £65,000 per annum plus Bonus Ref: 754PW To apply using our preferred format, please visit French Selection website, go to the vacancies page, search job reference: 754PW The company: Our Client is a leader in providing innovative, sustainable, and high-performance solutions across industries such as power generation, Nuclear, oil and gas, refining, and chemical manufacturing. They work closely with clients to deliver optimized operational efficiency and reduced environmental impact through customized engineering solutions. Main duties: As a Sales Engineer specializing in Power Plant Solutions, you will serve as both a technical expert and a project manager, coordinating solutions and on-site services to power plants, refineries, oil and gas facilities, and chemical plants. Operating as a dedicated consultant in your assigned territory, you will work closely with Sales Managers to manage and grow both existing and new projects. Reporting to the European Sales Manager, you will oversee solution design, project management, and technician deployment to ensure successful implementation and customer satisfaction. The role: - Act as a consultant for clients in power generation, refining, oil and gas, and chemical industries. - Manage existing accounts and pursue new projects in the UK and Ireland - Build client relationships by understanding technical and project needs to deliver tailored solutions. - Collaborate with Sales Managers to develop strategies, proposals, and presentations aligned with client requirements. - Work with engineering and R&D teams to design solutions that meet industry standards. - Develop technical proposals, including project scope, timelines, and budgets. - Assist in pricing and contract negotiations to align with client needs and company goals. - Manage project execution, from proposal to post-installation support. - Coordinate on-site technician deployments, ensuring quality and safety compliance. - Serve as the primary point of contact for clients and technicians, facilitating communication and troubleshooting. - Provide ongoing technical support and optimization to ensure client satisfaction. - Liaise between clients and technical teams to resolve issues and recommend improvements. - Conduct follow-up visits to ensure alignment with client expectations. - Stay informed on industry trends and regulatory requirements. - Support Sales Managers in identifying new opportunities and market expansion strategies. - Contribute to go-to-market strategies to drive growth and competitive advantage. The candidate: - Bachelor s degree in Mechanical, Electrical, Chemical Engineering, or a related technical field. - Experience in sales engineering, technical consulting, or project management, preferably in power generation - Strong understanding of power generation systems, combined cycle gas turbine, heat recovery steam generation, refining or chemical industries. - Experience managing end-to-end project delivery, including technician scheduling, on-site troubleshooting, and adherence to timelines. - Strong communication skills, with the ability to explain complex technical concepts to diverse audiences. - Ability to work cross-functionally and lead on-site technician teams to ensure smooth project execution. - Willingness to travel within the UK and overseas The salary: £65,000 per annum plus Bonus French Selection, leading UK-based consultancy specialising in the recruitment of bilingual and multilingual professionals for international business (industries and services). We are the leading recruitment consultancy for German, French, Italian and Spanish speaking positions. Also recruiting for positions with other languages such as Dutch, Polish, Portuguese, Scandinavian languages, Mandarin, Japanese and Arabic.
