Role: Chinook / Apache Technician / Supervisor (Rotary) Location: Middle Wallop Duration: 6 Months What are we looking for: 5x Mechanical Supervisors 2 x Avionic Supervisors 10 x Mechanical Technicians 3 x Avionic Technicians The successful candidates will likely have experience working on Chinook or Apache air frames but candidates with rotary experience will be considered Technician The role of the Technician position will form part of a Maintenance, Repair and Operations (MRO) organisation , working as part of a team in support of our key programmes. The individual will be responsible for ensuring established process adherence, accurate and timely work recording and contractual/regulatory compliance. Supervisor Reporting to an Operations Lead, this role provides direct control, oversight, mentoring and is responsible for carrying out supervision of technicians in the execution of their maintenance activities. Will have a proven technical knowledge and the ability to supervise, plan, sequence, distribute and control technical work for a small group of aircraft technicians. Will be able to provide effective leadership, direction and guidance as and when required. Will ensure the standards/certification of all associated aircraft paperwork completed by their team has been completed IAW company procedures. Must hold or be able to obtain company supervisory authorisations on the aircraft type being worked on, independent inspections and fulfil their individual tasks within the scope of their authorisation. Will adopt a collaborative approach to their work and role model Airmanship, Husbandry and H&S practise within their teams. Qualifications/Experience Required: Recognised relevant trade apprenticeship or trade training equivalent. Knowledge of general aircraft maintenance and processes applicable to the aviation environment (Human Factors, FOD control, tool control, health & safety & COSHH). Experience in either commercial or defence would be considered. Responsibilities: Deliver aircraft maintenance under Boeing's own MAA MRP Part 145 approval or under the approval of the MOD customer. Assembly, disassembly, modification or repair of aircraft systems/structures/electronics/components. Upgrading aerospace components to correct failures or implement changes. Perform routine troubleshooting of complex aircraft systems, such as pneumatic, hydraulic and electrical/electronic to isolate faults and repair faulty components IAW technical information published in authorised maintenance documents. Be flexible with work locations and work times to ensure aircraft are delivered on time to the customer. For more information and immediate consideration please apply directly to this advert
Sep 04, 2025
Contractor
Role: Chinook / Apache Technician / Supervisor (Rotary) Location: Middle Wallop Duration: 6 Months What are we looking for: 5x Mechanical Supervisors 2 x Avionic Supervisors 10 x Mechanical Technicians 3 x Avionic Technicians The successful candidates will likely have experience working on Chinook or Apache air frames but candidates with rotary experience will be considered Technician The role of the Technician position will form part of a Maintenance, Repair and Operations (MRO) organisation , working as part of a team in support of our key programmes. The individual will be responsible for ensuring established process adherence, accurate and timely work recording and contractual/regulatory compliance. Supervisor Reporting to an Operations Lead, this role provides direct control, oversight, mentoring and is responsible for carrying out supervision of technicians in the execution of their maintenance activities. Will have a proven technical knowledge and the ability to supervise, plan, sequence, distribute and control technical work for a small group of aircraft technicians. Will be able to provide effective leadership, direction and guidance as and when required. Will ensure the standards/certification of all associated aircraft paperwork completed by their team has been completed IAW company procedures. Must hold or be able to obtain company supervisory authorisations on the aircraft type being worked on, independent inspections and fulfil their individual tasks within the scope of their authorisation. Will adopt a collaborative approach to their work and role model Airmanship, Husbandry and H&S practise within their teams. Qualifications/Experience Required: Recognised relevant trade apprenticeship or trade training equivalent. Knowledge of general aircraft maintenance and processes applicable to the aviation environment (Human Factors, FOD control, tool control, health & safety & COSHH). Experience in either commercial or defence would be considered. Responsibilities: Deliver aircraft maintenance under Boeing's own MAA MRP Part 145 approval or under the approval of the MOD customer. Assembly, disassembly, modification or repair of aircraft systems/structures/electronics/components. Upgrading aerospace components to correct failures or implement changes. Perform routine troubleshooting of complex aircraft systems, such as pneumatic, hydraulic and electrical/electronic to isolate faults and repair faulty components IAW technical information published in authorised maintenance documents. Be flexible with work locations and work times to ensure aircraft are delivered on time to the customer. For more information and immediate consideration please apply directly to this advert
Contract position Outside IR35 Hybrid working - Hampshire Key Responsibilities: Utilising strong experience with Solidworks for mechanical design. Applying Design for Manufacturing (DFM) principles focusing on mechanical design, machining processes, bonded assemblies, and production line processes. Conducting technical presentations and justifying design approaches to third parties. Managing multiple projects efficiently, making key design decisions where required. Ensuring a keen eye for detail in all aspects of the design and manufacturing process. Job Requirements: Extensive experience in mechanical engineering within the aerospace sector. Proficiency with Solidworks and a deep understanding of DFM principles. Strong technical presentation skills, both written and verbal. Ability to effectively communicate ideas and background reasoning to stakeholders. Solid multitasking abilities and prioritisation across various projects. Desirable: Experience with Solidworks PDM, knowledge of aircraft systems and aerospace processes, familiarity with Engineering Change Order processes, and previous use of MRP tools. Benefits: Opportunity to work on cutting-edge aerospace projects. Collaborative and innovative work environment. Chance to enhance your professional skills and gain valuable industry experience. If you possess strong mechanical engineering skills with a background in aerospace design for manufacturing and are looking for an exciting contract opportunity, we would be keen to hear from you. Apply now to join our client's dynamic team and contribute to pioneering aerospace projects.
Sep 04, 2025
Contractor
Contract position Outside IR35 Hybrid working - Hampshire Key Responsibilities: Utilising strong experience with Solidworks for mechanical design. Applying Design for Manufacturing (DFM) principles focusing on mechanical design, machining processes, bonded assemblies, and production line processes. Conducting technical presentations and justifying design approaches to third parties. Managing multiple projects efficiently, making key design decisions where required. Ensuring a keen eye for detail in all aspects of the design and manufacturing process. Job Requirements: Extensive experience in mechanical engineering within the aerospace sector. Proficiency with Solidworks and a deep understanding of DFM principles. Strong technical presentation skills, both written and verbal. Ability to effectively communicate ideas and background reasoning to stakeholders. Solid multitasking abilities and prioritisation across various projects. Desirable: Experience with Solidworks PDM, knowledge of aircraft systems and aerospace processes, familiarity with Engineering Change Order processes, and previous use of MRP tools. Benefits: Opportunity to work on cutting-edge aerospace projects. Collaborative and innovative work environment. Chance to enhance your professional skills and gain valuable industry experience. If you possess strong mechanical engineering skills with a background in aerospace design for manufacturing and are looking for an exciting contract opportunity, we would be keen to hear from you. Apply now to join our client's dynamic team and contribute to pioneering aerospace projects.
Aircraft Wheel Mechanic Location: Stansted Airport Permanent role for Aircraft Wheel Mechanic. An Independent market leader in the aerospace component repair sector has a new role for an aviation wheel engineer. Duties to include:- Assembly and Disassembly of aircraft wheels Technical cleaning of wheels and relevant components Paint stripping The ideal candidate will have some previous aircraft wheel experience, although not essential as training would be provided. Please send your CV for immediate start.
Sep 03, 2025
Full time
Aircraft Wheel Mechanic Location: Stansted Airport Permanent role for Aircraft Wheel Mechanic. An Independent market leader in the aerospace component repair sector has a new role for an aviation wheel engineer. Duties to include:- Assembly and Disassembly of aircraft wheels Technical cleaning of wheels and relevant components Paint stripping The ideal candidate will have some previous aircraft wheel experience, although not essential as training would be provided. Please send your CV for immediate start.
Overview Expleo are looking for a Stress Engineer. The successful candidate will conduct stress analysis in support of concessions teams for evaluation of non-conformances & repairs of civil aerospace products and their components and in support of the development of existing and new products/structures. We are able to offer this position on a permanent or contract basis. Responsibilities As the successful candidate, you will be expected to perform day-to-day tasks in the existing stress team, liaise with the other Engineering functions to deliver analysis reports and workfiles to the required standard according to the Programme, Technical Authority and Chief Engineers milestones. Ensuring structural integrity aspects of the Components/Sub-modules Carrying out Stress analysis calculations to assess design solutions for a whole range of tasks, potentially from concept repairs to fastener analysis. Supporting the structural design process to ensure required quality is achieved within direct area of responsibility Resolving technical issues independently. Reporting and escalating critical technical issues to the Chief Engineer and/or Technical Authority. Supporting continuous improvement initiatives to increase team efficiency Interfacing with adjacent work packages or sub-assemblies. Mentoring engineers in his/her area of expertise. Structural testing methods and results interpretation. Skilled in tools such as CATIA V5, ISAMI, Hyperworks, SAP, NASTRAN, PATRAN, MATHCAD, EXCEL, PYTHON etc. Qualifications BEng or equivalent in Mechanical, Aerospace, Aeronautical Engineering or relevant subject Essential skills Strong interpersonal & communication skills. Knowledge and experience in the design, development and qualification of airframes and vehicle systems, including expertise in one or more of: In-depth knowledge of airframe static stress analysis techniques including hand calculation methods (including the use of MathCAD), finite element techniques (especially Nastran and Hypermesh), derivation of material and component allowable (including the use of statistical techniques); In-depth knowledge of airframe fatigue substantiation including safe life and fracture mechanics techniques. Knowledge of both metallic and composite structures. Strong knowledge of the overall static structural substantiation process from definition of external loads through airframe finite element analysis to final check stress clearance; Strong knowledge of the overall fatigue substantiation process from the derivation of component mean and working strengths, flight data gathering of fatigue loads, through fatigue life calculation methods to in-service aircraft monitoring; Strong knowledge of the relevant airworthiness requirements related to airframes Strong understanding of estimating and early recognition of change to aid in customer negotiations Ability to juggle priorities and work streams Develop repair solutions in conjunction with the Design Engineering team to overcome non conformance of components. Desired skills Leadership & team engagement Experience NASTRAN SAP Patran Hyperworks ISAMI Python CATIA Primes/PASS/VPM Benefits Collaborative working environment - we stand shoulder to shoulder with our clients and our peers through good times and challenges We empower all passionate technology loving professionals by allowing them to expand their skills and take part in inspiring projects Expleo Academy - enables you to acquire and develop the right skills by delivering a suite of accredited training courses Competitive company benefits such as medical and dental insurance, pension, life assurance, employee wellbeing programme, sports and social events, birthday hampers and much more! Always working as one team, our people are not afraid to think big and challenge the status quo As a Disability Confident Committed Employer we have committed to: Ensure our recruitment process is inclusive and accessible Communicating and promoting vacancies Offering an interview to disabled people who meet the minimum criteria for the job Anticipating and providing reasonable adjustments as required Supporting any existing employee who acquires a disability or long term health condition, enabling them to stay in work at least one activity that will make a difference for disabled people "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age". We treat everyone fairly and equitably across the organisation, including providing any additional support and adjustments needed for everyone to thrive
Sep 02, 2025
Full time
Overview Expleo are looking for a Stress Engineer. The successful candidate will conduct stress analysis in support of concessions teams for evaluation of non-conformances & repairs of civil aerospace products and their components and in support of the development of existing and new products/structures. We are able to offer this position on a permanent or contract basis. Responsibilities As the successful candidate, you will be expected to perform day-to-day tasks in the existing stress team, liaise with the other Engineering functions to deliver analysis reports and workfiles to the required standard according to the Programme, Technical Authority and Chief Engineers milestones. Ensuring structural integrity aspects of the Components/Sub-modules Carrying out Stress analysis calculations to assess design solutions for a whole range of tasks, potentially from concept repairs to fastener analysis. Supporting the structural design process to ensure required quality is achieved within direct area of responsibility Resolving technical issues independently. Reporting and escalating critical technical issues to the Chief Engineer and/or Technical Authority. Supporting continuous improvement initiatives to increase team efficiency Interfacing with adjacent work packages or sub-assemblies. Mentoring engineers in his/her area of expertise. Structural testing methods and results interpretation. Skilled in tools such as CATIA V5, ISAMI, Hyperworks, SAP, NASTRAN, PATRAN, MATHCAD, EXCEL, PYTHON etc. Qualifications BEng or equivalent in Mechanical, Aerospace, Aeronautical Engineering or relevant subject Essential skills Strong interpersonal & communication skills. Knowledge and experience in the design, development and qualification of airframes and vehicle systems, including expertise in one or more of: In-depth knowledge of airframe static stress analysis techniques including hand calculation methods (including the use of MathCAD), finite element techniques (especially Nastran and Hypermesh), derivation of material and component allowable (including the use of statistical techniques); In-depth knowledge of airframe fatigue substantiation including safe life and fracture mechanics techniques. Knowledge of both metallic and composite structures. Strong knowledge of the overall static structural substantiation process from definition of external loads through airframe finite element analysis to final check stress clearance; Strong knowledge of the overall fatigue substantiation process from the derivation of component mean and working strengths, flight data gathering of fatigue loads, through fatigue life calculation methods to in-service aircraft monitoring; Strong knowledge of the relevant airworthiness requirements related to airframes Strong understanding of estimating and early recognition of change to aid in customer negotiations Ability to juggle priorities and work streams Develop repair solutions in conjunction with the Design Engineering team to overcome non conformance of components. Desired skills Leadership & team engagement Experience NASTRAN SAP Patran Hyperworks ISAMI Python CATIA Primes/PASS/VPM Benefits Collaborative working environment - we stand shoulder to shoulder with our clients and our peers through good times and challenges We empower all passionate technology loving professionals by allowing them to expand their skills and take part in inspiring projects Expleo Academy - enables you to acquire and develop the right skills by delivering a suite of accredited training courses Competitive company benefits such as medical and dental insurance, pension, life assurance, employee wellbeing programme, sports and social events, birthday hampers and much more! Always working as one team, our people are not afraid to think big and challenge the status quo As a Disability Confident Committed Employer we have committed to: Ensure our recruitment process is inclusive and accessible Communicating and promoting vacancies Offering an interview to disabled people who meet the minimum criteria for the job Anticipating and providing reasonable adjustments as required Supporting any existing employee who acquires a disability or long term health condition, enabling them to stay in work at least one activity that will make a difference for disabled people "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age". We treat everyone fairly and equitably across the organisation, including providing any additional support and adjustments needed for everyone to thrive
JMC Aviation are working with a component repair company based in Saffron Walden , looking to recruit a new Cargo Bay Technician to join their team. This client specialises in component repairs for a wide range of commercial aircraft from electrical to mechanical and interior to welding. The company offers a warm welcoming environment with a great team environment, aiding their employees in honing their skills providing outstanding customer service. This is a Permanent Position based in Saffron Walden . Working 08:00 - 16:30 (Monday - Friday) Salary and Benefits Competitive Salary Annual Profit Share Scheme Overtime paid at 1.5 times hourly rate 29 days holiday including Bank Holidays Nationally recognised Training provided and career development opportunities Company Uniform Provided and all necessary PPE Employee Assistance Programme The Role The primary purpose of this role is to disassemble, clean, inspect, repair, part replace and re-assemble cargo nets, webbing and seat restraints in order to reduce costs and add value to our customers. Other duties involve: Inspection and diagnosis of repairs and parts replacement requirements Disassembly and cleaning of aircraft cargo nets, webbing and seat restraints Repair and parts replacement of cargo nets, webbing and seat restraints Reassembly of cargo nets, webbing and seat restraints to required standards and timeframe Work in accordance with technical publications Correlate all work carried out in accordance with part 145 requirements. In order to be successful in this role the Cargo Bay Technician will need to demonstrate the following skills and attributes: Have experience within trimming and upholstery in aviation or automotive manufacturing Understanding of technical publications IT literate with the ability to use Word and Excel Knowledge of commercial aerospace practices is desirable Recognised engineering qualification is desirable. Right to live and work in the UK If you think this is the role for you and you have the necessary skills and attributes, please apply today or contact JMC Aviation for more details. Please note that due to the high level of applicants we will only be contacting shortlisted candidates regarding this role. In applying for the above position and sharing your personal data with JMC Aviation Limited, you acknowledge that your personal data will be processed in accordance with our Privacy Policy (found on our website). For this opportunity JMC Aviation Ltd is acting as an employment agency. In applying for the above position and sharing your personal data with JMC Aviation Limited, you acknowledge that your personal data will be processed in accordance with our Privacy Policy (found on our website).
Sep 02, 2025
Full time
JMC Aviation are working with a component repair company based in Saffron Walden , looking to recruit a new Cargo Bay Technician to join their team. This client specialises in component repairs for a wide range of commercial aircraft from electrical to mechanical and interior to welding. The company offers a warm welcoming environment with a great team environment, aiding their employees in honing their skills providing outstanding customer service. This is a Permanent Position based in Saffron Walden . Working 08:00 - 16:30 (Monday - Friday) Salary and Benefits Competitive Salary Annual Profit Share Scheme Overtime paid at 1.5 times hourly rate 29 days holiday including Bank Holidays Nationally recognised Training provided and career development opportunities Company Uniform Provided and all necessary PPE Employee Assistance Programme The Role The primary purpose of this role is to disassemble, clean, inspect, repair, part replace and re-assemble cargo nets, webbing and seat restraints in order to reduce costs and add value to our customers. Other duties involve: Inspection and diagnosis of repairs and parts replacement requirements Disassembly and cleaning of aircraft cargo nets, webbing and seat restraints Repair and parts replacement of cargo nets, webbing and seat restraints Reassembly of cargo nets, webbing and seat restraints to required standards and timeframe Work in accordance with technical publications Correlate all work carried out in accordance with part 145 requirements. In order to be successful in this role the Cargo Bay Technician will need to demonstrate the following skills and attributes: Have experience within trimming and upholstery in aviation or automotive manufacturing Understanding of technical publications IT literate with the ability to use Word and Excel Knowledge of commercial aerospace practices is desirable Recognised engineering qualification is desirable. Right to live and work in the UK If you think this is the role for you and you have the necessary skills and attributes, please apply today or contact JMC Aviation for more details. Please note that due to the high level of applicants we will only be contacting shortlisted candidates regarding this role. In applying for the above position and sharing your personal data with JMC Aviation Limited, you acknowledge that your personal data will be processed in accordance with our Privacy Policy (found on our website). For this opportunity JMC Aviation Ltd is acting as an employment agency. In applying for the above position and sharing your personal data with JMC Aviation Limited, you acknowledge that your personal data will be processed in accordance with our Privacy Policy (found on our website).
Job Title: Assembly Operator Site Location: Cheltenham Rate: 15.20 on days for a couple weeks - Moving to Swing shift (Earlies and Late) 18.55 Days: 6am - 2pm Afternoons: 2pm - 10:15pm Duration: 12-month contract This role is for skilled operators working within a variety of roles focused on the manufacturing and assembly of aircraft parts for civil and military programmes. The role will include a range of tasks and the successful applicant should demonstrate flexibility and work effectively as part of a larger multi-disciplined team Job Description Roles and Responsibilities Read and follow manufacturing plans Ensure quality and health & safety adherence Follow daily manufacturing metrics Participate in lean activities and other initiatives Support manufacturing delivery needs Work in teams to achieve delivery targets Complete manufacturing paperwork and job cards. General electronics and mechanical assembly work Ability to recognise and identify components Ability to understand technical drawings and instructions Good concentration and attention to detail Able to produce work of high quality Dexterous and able to work on small products A flexible and co-operative approach Appreciation of health and safety practice in the workplace Experience of self-directed work teams and teaming Awareness of customer expectations and business requirements Communication and time keeping skills. Self-motivated with a positive, can-do attitude
Sep 02, 2025
Contractor
Job Title: Assembly Operator Site Location: Cheltenham Rate: 15.20 on days for a couple weeks - Moving to Swing shift (Earlies and Late) 18.55 Days: 6am - 2pm Afternoons: 2pm - 10:15pm Duration: 12-month contract This role is for skilled operators working within a variety of roles focused on the manufacturing and assembly of aircraft parts for civil and military programmes. The role will include a range of tasks and the successful applicant should demonstrate flexibility and work effectively as part of a larger multi-disciplined team Job Description Roles and Responsibilities Read and follow manufacturing plans Ensure quality and health & safety adherence Follow daily manufacturing metrics Participate in lean activities and other initiatives Support manufacturing delivery needs Work in teams to achieve delivery targets Complete manufacturing paperwork and job cards. General electronics and mechanical assembly work Ability to recognise and identify components Ability to understand technical drawings and instructions Good concentration and attention to detail Able to produce work of high quality Dexterous and able to work on small products A flexible and co-operative approach Appreciation of health and safety practice in the workplace Experience of self-directed work teams and teaming Awareness of customer expectations and business requirements Communication and time keeping skills. Self-motivated with a positive, can-do attitude
We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems. Key Responsibilities Proactively respond to any issues related to the engine or test site to ensure safety. Assist in managing operations that involve hazardous materials. Ensure that correct pressures are maintained in the feedlines during tests. Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations. Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests. Required Skills and Competencies Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization. A proactive attitude toward safety and operational support.
Sep 02, 2025
Full time
We are seeking a skilled technician to work closely with the Senior Test Engineer at aircraft test facilities. You will work extensively with high-pressure gas and fluid systems. Key Responsibilities Proactively respond to any issues related to the engine or test site to ensure safety. Assist in managing operations that involve hazardous materials. Ensure that correct pressures are maintained in the feedlines during tests. Assist lead Test Engineers with: site preparation and maintenance: conducting pressure and control system checks: instrument calibration and steam boiler operations. Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests. Required Skills and Competencies Hands-on mechanical fitter or engineering skills, ideally gained within an engineering-focused organization. A proactive attitude toward safety and operational support.
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for a Light Wheel Mechanic to join our team. The role Based in Kaiserslautern, Germany you ll get to work alongside our dedicated workforce on a US Military base. Prior light vehicle maintenance experience will be required, although additional training will be provided on site. This role is a fantastic chance for you to further develop your skills as a light wheel mechanic, working on a diverse range of wheeled military vehicles in an exciting environment. General job description Diagnose system malfunctions, isolate causes, and correct deficiencies. Dismantle and reassemble equipment, using technical manuals. Inspect, repairs, and replace components, engines, transmissions, and sub-assemblies. Identify parts in repair manuals and places order request for needed parts. Perform annual services on equipment fleet. Perform other duties as assigned. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : Extremely competitive rates of pay. Weekly living allowance. £250 towards you travelling to Germany. Working hours Monday to Friday. Progression and opportunities for promotion. Holiday entitlement + bank holidays. Training given to enhance your skillset. Assistance with finding accommodation. We also have a GMBH contract with Euro pay rates, for more information on this please ask and we will be happy to provide you with the information. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
Sep 01, 2025
Full time
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for a Light Wheel Mechanic to join our team. The role Based in Kaiserslautern, Germany you ll get to work alongside our dedicated workforce on a US Military base. Prior light vehicle maintenance experience will be required, although additional training will be provided on site. This role is a fantastic chance for you to further develop your skills as a light wheel mechanic, working on a diverse range of wheeled military vehicles in an exciting environment. General job description Diagnose system malfunctions, isolate causes, and correct deficiencies. Dismantle and reassemble equipment, using technical manuals. Inspect, repairs, and replace components, engines, transmissions, and sub-assemblies. Identify parts in repair manuals and places order request for needed parts. Perform annual services on equipment fleet. Perform other duties as assigned. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : Extremely competitive rates of pay. Weekly living allowance. £250 towards you travelling to Germany. Working hours Monday to Friday. Progression and opportunities for promotion. Holiday entitlement + bank holidays. Training given to enhance your skillset. Assistance with finding accommodation. We also have a GMBH contract with Euro pay rates, for more information on this please ask and we will be happy to provide you with the information. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We are currently looking for Sheet Metal Mechanics/Technicians to join our team The role Based in Illesheim, Germany you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Sheet Metal Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfil each of the following essential duties: You must have experience working on rotary aircraft/helicopters Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits We are more than happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contract. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Annual Sign-On and Completion Bonus. Potential to earn more with overtime and TDY Assistance with sourcing accommodation. Holiday entitlement. All tools will be included on this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time Do you know someone who would be suitable for this role? We offer a referral fee of £250 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.
Sep 01, 2025
Full time
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We are currently looking for Sheet Metal Mechanics/Technicians to join our team The role Based in Illesheim, Germany you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Sheet Metal Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfil each of the following essential duties: You must have experience working on rotary aircraft/helicopters Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits We are more than happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contract. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Annual Sign-On and Completion Bonus. Potential to earn more with overtime and TDY Assistance with sourcing accommodation. Holiday entitlement. All tools will be included on this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time Do you know someone who would be suitable for this role? We offer a referral fee of £250 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.
Our client, a prominent player in the aerospace sector, is seeking a B1 Licensed Engineer - B737 to join their team in Twin Peaks, St Athan. This is a permanent role reporting to the Base Maintenance Manager within the Production Department. The position comes with seasonal shift hours from Monday to Thursday, 07:00 - 18:15, and Friday, 07:00 - 14:30, with attendance required from 1 September to 31 May, plus 10 days refresher training in August. Key Responsibilities: Leading a team of Technicians and Mechanics in all aspects of Base Maintenance checks. Ensuring correct completion of paperwork and forms as per Company MOE or published procedures. Keeping the Bay Manager and Production Planners updated on maintenance requirements and any potential issues. Ensuring all maintenance documentation is completed in a timely manner, including that of personnel assisting in the task. Allocating correct timings to tasks and ensuring accurate bookings on task cards. Ensuring proper storage of aircraft components, including labelling, racking, availability, and serviceability. Maintaining standard engineering practices within the hangar, including completing task cards accurately, ensuring cleanliness, and preventing FOD. Recommending improvements in working conditions, practices, and procedures to Bay Managers and Maintenance Manager. Undertaking any other tasks and duties as reasonably required in accordance with business needs. Working in accordance with the company framework and compliance with organisational policies, including participating in risk management and mandatory training. Job Requirements: Must have the right to live and work in the UK. Experience in aircraft maintenance, with significant experience in Base Maintenance. Ability to use recognised aircraft documentation. Broad skillset in aircraft systems, including rigging, component replacement, and modification embodiment. Good structural assessment and repair knowledge. In-depth knowledge of aircraft systems. B1 Aircraft Maintenance Engineers Licence: Must be UK CAA AML Type Rating & Recency for any Boeing or Airbus family aircraft. Desirable: Type Rating & Recency for Boeing 737NG / Boeing (Apply online only). Benefits: Competitive salary and shift premium. Opportunities for professional development and training. Supportive work environment. Comprehensive employee benefits package. If you are a seasoned B1 Licensed Engineer looking for a challenging and rewarding opportunity in the aerospace sector, we would love to hear from you. Apply now to become a part of our client's esteemed team.
Sep 01, 2025
Full time
Our client, a prominent player in the aerospace sector, is seeking a B1 Licensed Engineer - B737 to join their team in Twin Peaks, St Athan. This is a permanent role reporting to the Base Maintenance Manager within the Production Department. The position comes with seasonal shift hours from Monday to Thursday, 07:00 - 18:15, and Friday, 07:00 - 14:30, with attendance required from 1 September to 31 May, plus 10 days refresher training in August. Key Responsibilities: Leading a team of Technicians and Mechanics in all aspects of Base Maintenance checks. Ensuring correct completion of paperwork and forms as per Company MOE or published procedures. Keeping the Bay Manager and Production Planners updated on maintenance requirements and any potential issues. Ensuring all maintenance documentation is completed in a timely manner, including that of personnel assisting in the task. Allocating correct timings to tasks and ensuring accurate bookings on task cards. Ensuring proper storage of aircraft components, including labelling, racking, availability, and serviceability. Maintaining standard engineering practices within the hangar, including completing task cards accurately, ensuring cleanliness, and preventing FOD. Recommending improvements in working conditions, practices, and procedures to Bay Managers and Maintenance Manager. Undertaking any other tasks and duties as reasonably required in accordance with business needs. Working in accordance with the company framework and compliance with organisational policies, including participating in risk management and mandatory training. Job Requirements: Must have the right to live and work in the UK. Experience in aircraft maintenance, with significant experience in Base Maintenance. Ability to use recognised aircraft documentation. Broad skillset in aircraft systems, including rigging, component replacement, and modification embodiment. Good structural assessment and repair knowledge. In-depth knowledge of aircraft systems. B1 Aircraft Maintenance Engineers Licence: Must be UK CAA AML Type Rating & Recency for any Boeing or Airbus family aircraft. Desirable: Type Rating & Recency for Boeing 737NG / Boeing (Apply online only). Benefits: Competitive salary and shift premium. Opportunities for professional development and training. Supportive work environment. Comprehensive employee benefits package. If you are a seasoned B1 Licensed Engineer looking for a challenging and rewarding opportunity in the aerospace sector, we would love to hear from you. Apply now to become a part of our client's esteemed team.
Job Title: Assembly and Test Technician - PM Shift Location: Tewkesbury Contract: Permanent Salary: Circa £40,500 Role Overview - Assembly and Test Technician Our leading client are looking for an experienced Assembly and Test Technician to join their team at their brand-new state of the art facility located in Tewkesbury. The successful candidate will be responsible for the assembly of a large variety of hydraulic components, manufactured for the motorsport and aerospace industries. This role requires you to work on a permanent PM shift basis. What we can offer - Assembly and Test Technician Career progression opportunities 33 Days annual leave including bank holidays Company pension contributions starting at 6% Life Assurance Employee Share Option Key Responsibilities - Assembly and Test Technician Finding and testing faults of complex hydraulic products. Assembling of complex hydraulic products. Reading engineering drawings. Completing Quality Audits. Building new/repairing complex hydraulic products. Using measuring equipment such as Micrometers, Vernier Calipers and Height Gauges to inspect component parts. Key Experience & Qualifications - Assembly and Test Technician Apprentice trained (or equivalent level of qualification) ideally within Mechanical Engineering. Proven experience within a complex engineering/manufacturing environment. Competent at reading and following different set procedures. Competency with a range of assembly tools Hydraulic Testing Experience For more information about this role, please contact Ben Dawson on (phone number removed) or send a copy of your CV to (url removed). Candidates who are currently a Aircraft Fitter, Aircraft Technician, Mechanical Fitter, Hydraulic Fitter, Fitter/Tester or Mechanical Technician may be suitable for this position. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 01, 2025
Full time
Job Title: Assembly and Test Technician - PM Shift Location: Tewkesbury Contract: Permanent Salary: Circa £40,500 Role Overview - Assembly and Test Technician Our leading client are looking for an experienced Assembly and Test Technician to join their team at their brand-new state of the art facility located in Tewkesbury. The successful candidate will be responsible for the assembly of a large variety of hydraulic components, manufactured for the motorsport and aerospace industries. This role requires you to work on a permanent PM shift basis. What we can offer - Assembly and Test Technician Career progression opportunities 33 Days annual leave including bank holidays Company pension contributions starting at 6% Life Assurance Employee Share Option Key Responsibilities - Assembly and Test Technician Finding and testing faults of complex hydraulic products. Assembling of complex hydraulic products. Reading engineering drawings. Completing Quality Audits. Building new/repairing complex hydraulic products. Using measuring equipment such as Micrometers, Vernier Calipers and Height Gauges to inspect component parts. Key Experience & Qualifications - Assembly and Test Technician Apprentice trained (or equivalent level of qualification) ideally within Mechanical Engineering. Proven experience within a complex engineering/manufacturing environment. Competent at reading and following different set procedures. Competency with a range of assembly tools Hydraulic Testing Experience For more information about this role, please contact Ben Dawson on (phone number removed) or send a copy of your CV to (url removed). Candidates who are currently a Aircraft Fitter, Aircraft Technician, Mechanical Fitter, Hydraulic Fitter, Fitter/Tester or Mechanical Technician may be suitable for this position. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
HGV Vehicle Mechanic Rare Chance to Work on Specialist Airport Equipment! Heathrow Airport £46,730- £50,547 This is an exciting chance for an experienced Vehicle Mechanic to work hands-on with specialist Ground Service Equipment (GSE) at one of the UK s busiest airports. Heathrow Airport We are currently recruiting for three experienced HGV Mechanic/ HGV Technician to join a growing team at Heathrow Airport. Working as a mechanic, you will be responsible for the servicing of all ground equipment airside. Working on ground service equipment, including towing tractors, aircraft tugs, baggage elevators, and other specialist vehicles. Using your mechanical expertise, you will diagnose faults and carry out repairs, ensuring the smooth operation of equipment on-site. HGV Mechanic Responsibilities and Duties Servicing, maintenance, and repair of GSE Equipment Complete all paperwork to a high standard. Providing a best-in-class customer experience for our business customers Comply with H+S Legislation Liaise with internal customers. Assist in carrying out all vehicle mechanical and electrical PPM (Planned and Preventative Maintenance) in line with set schedules Vehicle Mechanic Package 1. Vehicle Technician Hours- 4 on 4 off 12hr day & night shifts, paying £50,547 2. Vehicle Technician working 4 on 4 off working days 06:00-18:00, paying £46,730 3. Nightshift HGV Mechanic 4 on 4 off Night shift 18:00-06:00, paying £49,635 All offering enhanced overtime rates at time & a half Vehicle Mechanic About you GSE experience (desirable) GSE or HGV or Plant mechanical knowledge 5 year checkable history in order to get an airside pass Able to pass a basic criminal record check. Benefits: Company pension Employee discount On-site parking Why Apply? This is a rare career opportunity to work on specialist airport equipment in a role that blends variety, challenge, and professional growth. You ll gain valuable experience few mechanics ever get all while being part of a supportive, expert team. Apply now and get your career on the runway!
Sep 01, 2025
Full time
HGV Vehicle Mechanic Rare Chance to Work on Specialist Airport Equipment! Heathrow Airport £46,730- £50,547 This is an exciting chance for an experienced Vehicle Mechanic to work hands-on with specialist Ground Service Equipment (GSE) at one of the UK s busiest airports. Heathrow Airport We are currently recruiting for three experienced HGV Mechanic/ HGV Technician to join a growing team at Heathrow Airport. Working as a mechanic, you will be responsible for the servicing of all ground equipment airside. Working on ground service equipment, including towing tractors, aircraft tugs, baggage elevators, and other specialist vehicles. Using your mechanical expertise, you will diagnose faults and carry out repairs, ensuring the smooth operation of equipment on-site. HGV Mechanic Responsibilities and Duties Servicing, maintenance, and repair of GSE Equipment Complete all paperwork to a high standard. Providing a best-in-class customer experience for our business customers Comply with H+S Legislation Liaise with internal customers. Assist in carrying out all vehicle mechanical and electrical PPM (Planned and Preventative Maintenance) in line with set schedules Vehicle Mechanic Package 1. Vehicle Technician Hours- 4 on 4 off 12hr day & night shifts, paying £50,547 2. Vehicle Technician working 4 on 4 off working days 06:00-18:00, paying £46,730 3. Nightshift HGV Mechanic 4 on 4 off Night shift 18:00-06:00, paying £49,635 All offering enhanced overtime rates at time & a half Vehicle Mechanic About you GSE experience (desirable) GSE or HGV or Plant mechanical knowledge 5 year checkable history in order to get an airside pass Able to pass a basic criminal record check. Benefits: Company pension Employee discount On-site parking Why Apply? This is a rare career opportunity to work on specialist airport equipment in a role that blends variety, challenge, and professional growth. You ll gain valuable experience few mechanics ever get all while being part of a supportive, expert team. Apply now and get your career on the runway!
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for an Apache Armament Technician to join our team. The role Based in Ali Al Salem, Kuwait you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Armament Technician, working in an exciting environment. Knowledge and Skills Required To perform this job successfully, an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contracts. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sourced accommodation. Paid holiday entitlement + bank holidays. Living quarter allowance. Sign on bonus. Annual completion bonus. All tools will be included in this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
Sep 01, 2025
Contractor
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for an Apache Armament Technician to join our team. The role Based in Ali Al Salem, Kuwait you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Armament Technician, working in an exciting environment. Knowledge and Skills Required To perform this job successfully, an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contracts. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sourced accommodation. Paid holiday entitlement + bank holidays. Living quarter allowance. Sign on bonus. Annual completion bonus. All tools will be included in this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
Job Title: Assembly and Test Technician - Nights Location: Tewkesbury Contract: Permanent Salary: Competitive Role Overview - Assembly and Test Technician Our leading client are looking for an experienced Assembly and Test Technician to join their team at their brand-new state of the art facility located in Tewkesbury. The successful candidate will be responsible for the assembly of a large variety of hydraulic components, manufactured for the motorsport and aerospace industries. This role requires you to work on a night shift basis. What we can offer - Assembly and Test Technician Career progression opportunities 33 Days annual leave including bank holidays Company pension contributions starting at 6% Life Assurance Employee Share Option Key Responsibilities - Assembly and Test Technician Finding and testing faults of complex hydraulic products. Assembling of complex hydraulic products. Reading engineering drawings. Completing Quality Audits. Building new/repairing complex hydraulic products. Using measuring equipment such as Micrometers, Vernier Calipers and Height Gauges to inspect component parts. Key Experience & Qualifications - Assembly and Test Technician Apprentice trained (or equivalent level of qualification) ideally within Mechanical Engineering. Proven experience within a complex engineering/manufacturing environment. Competent at reading and following different set procedures. Competency with a range of assembly tools Hydraulic Testing Experience For more information about this role, please contact Ben Dawson on (phone number removed) or send a copy of your CV to (url removed). Candidates who are currently a Aircraft Fitter, Aircraft Technician, Mechanical Fitter, Hydraulic Fitter, Fitter/Tester or Mechanical Technician may be suitable for this position. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Sep 01, 2025
Full time
Job Title: Assembly and Test Technician - Nights Location: Tewkesbury Contract: Permanent Salary: Competitive Role Overview - Assembly and Test Technician Our leading client are looking for an experienced Assembly and Test Technician to join their team at their brand-new state of the art facility located in Tewkesbury. The successful candidate will be responsible for the assembly of a large variety of hydraulic components, manufactured for the motorsport and aerospace industries. This role requires you to work on a night shift basis. What we can offer - Assembly and Test Technician Career progression opportunities 33 Days annual leave including bank holidays Company pension contributions starting at 6% Life Assurance Employee Share Option Key Responsibilities - Assembly and Test Technician Finding and testing faults of complex hydraulic products. Assembling of complex hydraulic products. Reading engineering drawings. Completing Quality Audits. Building new/repairing complex hydraulic products. Using measuring equipment such as Micrometers, Vernier Calipers and Height Gauges to inspect component parts. Key Experience & Qualifications - Assembly and Test Technician Apprentice trained (or equivalent level of qualification) ideally within Mechanical Engineering. Proven experience within a complex engineering/manufacturing environment. Competent at reading and following different set procedures. Competency with a range of assembly tools Hydraulic Testing Experience For more information about this role, please contact Ben Dawson on (phone number removed) or send a copy of your CV to (url removed). Candidates who are currently a Aircraft Fitter, Aircraft Technician, Mechanical Fitter, Hydraulic Fitter, Fitter/Tester or Mechanical Technician may be suitable for this position. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Morson Talent are currently recruiting an Aircraft Mechanical Supervisor on a long term contract basis at RNAS Yeovilton. Primary tasks - To provision Aircraft Mechanical/Avionic Maintenance supporting Front Line and Scheduled and Unscheduled Maintenance on Merlin Mk4/4a aircraft. - Carry out the CHF Squadron engineering responsibilities equivalent to a Mechanical Supervisor POAET. - To investigate and diagnose faults and defects in equipment and systems, and supervise preventative maintenance within own trade. - Use specialist skills to carry out and/or supervise the repair, modification and fault rectification, pre & post-embarkation maintenance and all other maintenance activities applicable to Merlin Mk4/4A within trade boundaries. - Supervise and/or carry out the removal, dismantling re-assembly and refitting of role equipment, aircraft subassemblies and systems within own trade. - Carry out independent inspections within own trade. - Carry out the duties of MF700C Flight Servicing and MF700C Coordinator including coordinating maintenance work orders as required. - Supervise and/or carry out husbandry defect rectification and anti corrosion work. Secondary tasks - Carry out all tasks in accordance with military regulations, Air Publications, Aircraft Document Set (i.e MOD Form 700C series), other instructions, local orders and health and safety regulations. - Flight Servicing and self-supervised routine maintenance on Merlin Mk4/4A. - Carry out robust Corrosion Prevention in accordance with policy and guidance to maintain a high material state of the Merlin Mk4/4A. If this is of interest or would like more information, please apply today or alternatively contact Joseph Rice directly on (phone number removed) or (url removed)
Sep 01, 2025
Contractor
Morson Talent are currently recruiting an Aircraft Mechanical Supervisor on a long term contract basis at RNAS Yeovilton. Primary tasks - To provision Aircraft Mechanical/Avionic Maintenance supporting Front Line and Scheduled and Unscheduled Maintenance on Merlin Mk4/4a aircraft. - Carry out the CHF Squadron engineering responsibilities equivalent to a Mechanical Supervisor POAET. - To investigate and diagnose faults and defects in equipment and systems, and supervise preventative maintenance within own trade. - Use specialist skills to carry out and/or supervise the repair, modification and fault rectification, pre & post-embarkation maintenance and all other maintenance activities applicable to Merlin Mk4/4A within trade boundaries. - Supervise and/or carry out the removal, dismantling re-assembly and refitting of role equipment, aircraft subassemblies and systems within own trade. - Carry out independent inspections within own trade. - Carry out the duties of MF700C Flight Servicing and MF700C Coordinator including coordinating maintenance work orders as required. - Supervise and/or carry out husbandry defect rectification and anti corrosion work. Secondary tasks - Carry out all tasks in accordance with military regulations, Air Publications, Aircraft Document Set (i.e MOD Form 700C series), other instructions, local orders and health and safety regulations. - Flight Servicing and self-supervised routine maintenance on Merlin Mk4/4A. - Carry out robust Corrosion Prevention in accordance with policy and guidance to maintain a high material state of the Merlin Mk4/4A. If this is of interest or would like more information, please apply today or alternatively contact Joseph Rice directly on (phone number removed) or (url removed)
Job Title: Project Support Engineer (Rolling Stock) Job Location: Southwest London Hourly Pay Rate: 37.48 PAYE / 49.01 Umbrella Shifts: Minimum of 50 hours a week Shift Pattern: Days and Nights Duration: On-going contract Start Date: ASAP Industries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering Disciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer Client Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: Reporting to the Reliability Shift Manager, as part of a small technical team, you will be required to assist the Fleet Operator to undertake, supervise and record primarily in the corrective mechanical and electrical maintenance, detailed fault finding and repair on the Class 701 South West Rail fleet of trains. Successful applicants will be responsible for ensuring that any maintenance undertaken at the depot is completed in accordance with the company's processes, procedures and comply with all safety regulations. This is Safety Critical environment and all tasks undertaken will need to ensure that the operator can achieve and maintain the reliability and availability targets set for the trains. The candidate will also assist the Operator when failures occur during service and resolve any issues on the network. The candidate will need to provide high level technical support to the operator which will include: High Level fault finding electrically High Level fault finding mechanically Report writing Provide train systems engineering advice for the vehicle as a whole and for the key vehicle systems (such as TCMS - train control system, HVAC, propulsion, brakes, doors, on-train communications etc.) FRACAS - Failure reporting, analysis and corrective action system Produce solutions that provide short term mitigation and long term resolution Monitoring of warranty issues and liaising with supplier technical teams Attending to faulty trains in service, component replacements and modification work Helping customer with root cause analysis using Alstom FRACAS, 8D, PPS methodologies. Ensuring correct replacement parts are sourced Assisting operator in updating of maintenance instructions, overhaul instruction, processes & procedures to optimize maintenance and liaise with Alstom Technical Publications and Central Engineering teams where required Monitoring trains reliability & availability performance and issuing monthly performance reports Monitor of trains in Service using remote monitoring system called Orbita Down load train data from onboard train data recorders using laptops Run diagnostics software to identify faults with various train systems i.e. hydraulic systems, pneumatic systems, train management systems & on board computers. System software updates as required Obsolescence avoidance and mitigation Engineering support for all safety related incidents (NIRs), including representing the Customer with respect to access to Design Authority and equipment OEM's and the production of affirmative closing actions Service Provider representation on Failure Review Boards, feeding back decisions and outputs to the Customer Share experience gained of other fleets across the world which the Service Provider has supplied and/or supports, provision of recommendations and opportunities for design improvements, standardisation and/or modifications. Contribution to Health and Safety on a daily basis. Strong report writing skills. Qualifications: Minimum qualification required - NVQ Level 3 in an electrical discipline. Experience required: Experience within Rail desirable Use of Laptop's and diagnostic tools to determine faults Ability to work from maintenance manuals and schematics Experience of Mechanical or Electrical fault finding Experience of Mechanical or Electrical repairs Troubleshooting and evidence gathering. Person profile: You will be a highly self-motivated individual, able to work under your own initiative You will possess excellent communication & interpersonal skills You will need extensive all-round knowledge of Mechanical Engineering You will need extensive all-round knowledge of Electrical Engineering. This could also include the following: Responsible for accurate completion of all paperwork prior to supervisor validation. Undertake technical maintenance to the required standards. Reliability monitoring reporting Data analysing Rip out and replace electrical components Rip out and replace full or part of large wiring looms Re-install wiring Test Continuity Battery Modifications Repairing or installing Wi-Fi systems Changing relay boxes / Wiper motors If you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to (url removed) OR call (phone number removed). PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION. Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise. Please note the above job specification could be subject
Sep 01, 2025
Contractor
Job Title: Project Support Engineer (Rolling Stock) Job Location: Southwest London Hourly Pay Rate: 37.48 PAYE / 49.01 Umbrella Shifts: Minimum of 50 hours a week Shift Pattern: Days and Nights Duration: On-going contract Start Date: ASAP Industries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process Engineering Disciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown Engineer Client Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: Reporting to the Reliability Shift Manager, as part of a small technical team, you will be required to assist the Fleet Operator to undertake, supervise and record primarily in the corrective mechanical and electrical maintenance, detailed fault finding and repair on the Class 701 South West Rail fleet of trains. Successful applicants will be responsible for ensuring that any maintenance undertaken at the depot is completed in accordance with the company's processes, procedures and comply with all safety regulations. This is Safety Critical environment and all tasks undertaken will need to ensure that the operator can achieve and maintain the reliability and availability targets set for the trains. The candidate will also assist the Operator when failures occur during service and resolve any issues on the network. The candidate will need to provide high level technical support to the operator which will include: High Level fault finding electrically High Level fault finding mechanically Report writing Provide train systems engineering advice for the vehicle as a whole and for the key vehicle systems (such as TCMS - train control system, HVAC, propulsion, brakes, doors, on-train communications etc.) FRACAS - Failure reporting, analysis and corrective action system Produce solutions that provide short term mitigation and long term resolution Monitoring of warranty issues and liaising with supplier technical teams Attending to faulty trains in service, component replacements and modification work Helping customer with root cause analysis using Alstom FRACAS, 8D, PPS methodologies. Ensuring correct replacement parts are sourced Assisting operator in updating of maintenance instructions, overhaul instruction, processes & procedures to optimize maintenance and liaise with Alstom Technical Publications and Central Engineering teams where required Monitoring trains reliability & availability performance and issuing monthly performance reports Monitor of trains in Service using remote monitoring system called Orbita Down load train data from onboard train data recorders using laptops Run diagnostics software to identify faults with various train systems i.e. hydraulic systems, pneumatic systems, train management systems & on board computers. System software updates as required Obsolescence avoidance and mitigation Engineering support for all safety related incidents (NIRs), including representing the Customer with respect to access to Design Authority and equipment OEM's and the production of affirmative closing actions Service Provider representation on Failure Review Boards, feeding back decisions and outputs to the Customer Share experience gained of other fleets across the world which the Service Provider has supplied and/or supports, provision of recommendations and opportunities for design improvements, standardisation and/or modifications. Contribution to Health and Safety on a daily basis. Strong report writing skills. Qualifications: Minimum qualification required - NVQ Level 3 in an electrical discipline. Experience required: Experience within Rail desirable Use of Laptop's and diagnostic tools to determine faults Ability to work from maintenance manuals and schematics Experience of Mechanical or Electrical fault finding Experience of Mechanical or Electrical repairs Troubleshooting and evidence gathering. Person profile: You will be a highly self-motivated individual, able to work under your own initiative You will possess excellent communication & interpersonal skills You will need extensive all-round knowledge of Mechanical Engineering You will need extensive all-round knowledge of Electrical Engineering. This could also include the following: Responsible for accurate completion of all paperwork prior to supervisor validation. Undertake technical maintenance to the required standards. Reliability monitoring reporting Data analysing Rip out and replace electrical components Rip out and replace full or part of large wiring looms Re-install wiring Test Continuity Battery Modifications Repairing or installing Wi-Fi systems Changing relay boxes / Wiper motors If you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to (url removed) OR call (phone number removed). PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION. Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise. Please note the above job specification could be subject
A global leader within the Aerospace MRO is urgently recruiting for Avionics Mechanic on a permanent basis. Your main role will be to repair various cockpit instruments such as aircraft Communications, Navigation, Radar, Radio Audio units, Recorders and Instruments. The electronics side of role will involve fault finding and repairing to component level. This role requires working with technologies ranging from analogue electronics to complex microprocessor electronics and RF circuits. Mechanically, you will be stripping down the units using hand tools such as spanners screw drivers, allen keys. You will be working with very small parts & components and therefore attention to detail is essential for this role. Main Duties: Dis-assembling the units mechanically Repair or replace damaged components Carry out repair work on circuit boards, replace damaged electrical components Must have good soldering skills as you will be repairing damaged circuit boards Re-assembling the units once the repair work has been completed You will be working from work instructions Working Hours - 08:00- 16:00hrs Monday to Thursday and 08:00-15:30hrs on Friday. If you are interested in this role, please contact Sam Binke on (phone number removed). Alternatively, you can email your CV to (url removed)
Sep 01, 2025
Full time
A global leader within the Aerospace MRO is urgently recruiting for Avionics Mechanic on a permanent basis. Your main role will be to repair various cockpit instruments such as aircraft Communications, Navigation, Radar, Radio Audio units, Recorders and Instruments. The electronics side of role will involve fault finding and repairing to component level. This role requires working with technologies ranging from analogue electronics to complex microprocessor electronics and RF circuits. Mechanically, you will be stripping down the units using hand tools such as spanners screw drivers, allen keys. You will be working with very small parts & components and therefore attention to detail is essential for this role. Main Duties: Dis-assembling the units mechanically Repair or replace damaged components Carry out repair work on circuit boards, replace damaged electrical components Must have good soldering skills as you will be repairing damaged circuit boards Re-assembling the units once the repair work has been completed You will be working from work instructions Working Hours - 08:00- 16:00hrs Monday to Thursday and 08:00-15:30hrs on Friday. If you are interested in this role, please contact Sam Binke on (phone number removed). Alternatively, you can email your CV to (url removed)
Mechanical Supervisor Middle Wallop 41- 44 per hour UK Citizenship required. Military Helicopter experience required. The role of the Mechanical Supervisor position will form part of a Maintenance, Repair and Overhaul (MRO) organisation, working as part of a team in support of key programmes on Military Helicopter maintenance. The individual will be responsible for ensuring established process adherence, accurate and timely work recording and contractual/regulatory compliance. The Role: Reporting to an Operations Lead, this role provides direct control, oversight, mentoring and is responsible for carrying out supervision of technicians in the execution of their maintenance activities. Will have a proven technical knowledge and the ability to supervise, plan, sequence, distribute and control technical work for a small group of aircraft technicians. Will be able to provide effective leadership, direction and guidance as and when required. Will ensure the standards/certification of all associated aircraft paperwork completed by their team has been completed IAW company procedures. Must hold or be able to obtain company supervisory authorisations on the aircraft type being worked on, independent inspections and fulfil their individual tasks within the scope of their authorisation. Will adopt a collaborative approach to their work and role model Airmanship, Husbandry and H&S practise within their teams. Qualifications/Experience Required: Recognised relevant trade apprenticeship or trade experience equivalent. Knowledge of general aircraft maintenance and processes applicable to the aviation environment (Human Factors, FOD control, tool control, health & safety & COSHH). Experience in either commercial or defence would be considered. Proficient computer skills, use of the Microsoft Office suite. Be an effective team member displaying appropriate behaviours including Equity, Diversity and Inclusion. Responsibilities: Deliver aircraft maintenance under MAA MRP Part 145 approval or under the approval of the MOD customer. Assembly, disassembly and/or modification of systems, changing, removing, replacing and/or upgrading aerospace vehicle components to correct failures or implement changes. Perform routine troubleshooting of complex aircraft systems, such as pneumatic, hydraulic and electrical/electronic to isolate faults and repair faulty components IAW technical information published in authorised maintenance documents. Be flexible with work locations and work times to ensure aircraft are delivered on time to customer. Provide advice, guidance and mentoring to peers and others appropriate to their role. Exercise, or work under appropriate supervision for the role. Mitigate immediate risks including 'stop work' as well as escalate emerging risks, issues and shortfalls in a timely manner. Contribute to continuous improvement workshops and projects as required. Where directed, exercise 100% oversight of work carried out by Apprentices or Trainees as well as Apprentice/Trainee mentoring. Contribute positively to our open and honest reporting culture. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Sep 01, 2025
Contractor
Mechanical Supervisor Middle Wallop 41- 44 per hour UK Citizenship required. Military Helicopter experience required. The role of the Mechanical Supervisor position will form part of a Maintenance, Repair and Overhaul (MRO) organisation, working as part of a team in support of key programmes on Military Helicopter maintenance. The individual will be responsible for ensuring established process adherence, accurate and timely work recording and contractual/regulatory compliance. The Role: Reporting to an Operations Lead, this role provides direct control, oversight, mentoring and is responsible for carrying out supervision of technicians in the execution of their maintenance activities. Will have a proven technical knowledge and the ability to supervise, plan, sequence, distribute and control technical work for a small group of aircraft technicians. Will be able to provide effective leadership, direction and guidance as and when required. Will ensure the standards/certification of all associated aircraft paperwork completed by their team has been completed IAW company procedures. Must hold or be able to obtain company supervisory authorisations on the aircraft type being worked on, independent inspections and fulfil their individual tasks within the scope of their authorisation. Will adopt a collaborative approach to their work and role model Airmanship, Husbandry and H&S practise within their teams. Qualifications/Experience Required: Recognised relevant trade apprenticeship or trade experience equivalent. Knowledge of general aircraft maintenance and processes applicable to the aviation environment (Human Factors, FOD control, tool control, health & safety & COSHH). Experience in either commercial or defence would be considered. Proficient computer skills, use of the Microsoft Office suite. Be an effective team member displaying appropriate behaviours including Equity, Diversity and Inclusion. Responsibilities: Deliver aircraft maintenance under MAA MRP Part 145 approval or under the approval of the MOD customer. Assembly, disassembly and/or modification of systems, changing, removing, replacing and/or upgrading aerospace vehicle components to correct failures or implement changes. Perform routine troubleshooting of complex aircraft systems, such as pneumatic, hydraulic and electrical/electronic to isolate faults and repair faulty components IAW technical information published in authorised maintenance documents. Be flexible with work locations and work times to ensure aircraft are delivered on time to customer. Provide advice, guidance and mentoring to peers and others appropriate to their role. Exercise, or work under appropriate supervision for the role. Mitigate immediate risks including 'stop work' as well as escalate emerging risks, issues and shortfalls in a timely manner. Contribute to continuous improvement workshops and projects as required. Where directed, exercise 100% oversight of work carried out by Apprentices or Trainees as well as Apprentice/Trainee mentoring. Contribute positively to our open and honest reporting culture. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Mechanical Technician Military Aircraft environment Hampshire 38- 41 per hour Inside IR35 6 Months with possible extensions SC Clearance required (UK Citizenship required) We are seeking a skilled Mechanical Technician to join a fast-paced MRO (Maintenance, Repair, and Operations) team supporting major UK defence and aerospace programmes. This is an exciting opportunity to work on advanced aircraft systems in a dynamic, collaborative environment. Key Responsibilities: Carry out assembly, disassembly, modification, and repair of aircraft systems, structures, electronics, and components. Troubleshoot complex mechanical systems, including pneumatic, hydraulic, and structural components. Deliver work in line with MAA Regulatory Articles (RA) , MRP Part 145 , Quality Assurance (QA) , and Safety Management Systems (SMS) . Ensure work meets approved technical standards and contractual requirements within your Responsibility, Accountability, and Authority (RAA) . Mentor apprentices or junior staff where required. Be flexible with work locations and schedules to meet programme deadlines. Contribute to continuous improvement and maintain a positive reporting culture. Qualifications & Experience: Recognised trade apprenticeship or equivalent mechanical/aircraft maintenance training. Knowledge of general aircraft maintenance and aviation processes, including Human Factors, FOD control, tool control, health & safety, and COSHH. Experience in commercial or defence aviation is advantageous. Strong technical, organisational, and communication skills. Proficient in Microsoft Office and other relevant IT systems. Demonstrates teamwork and commitment to equity, diversity, and inclusion. Work Authorisation & Security Clearance: Candidates must have the legal right to work in the UK. The role requires the ability to obtain UK Security Clearance (SC) ; UK residency is required. Why Work With Us: Short-term contract opportunities with competitive pay. Work on high-profile UK defence and aerospace programmes. Dynamic, collaborative, and supportive team culture. Strong focus on safety, first-time quality, and continuous improvement. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Sep 01, 2025
Contractor
Mechanical Technician Military Aircraft environment Hampshire 38- 41 per hour Inside IR35 6 Months with possible extensions SC Clearance required (UK Citizenship required) We are seeking a skilled Mechanical Technician to join a fast-paced MRO (Maintenance, Repair, and Operations) team supporting major UK defence and aerospace programmes. This is an exciting opportunity to work on advanced aircraft systems in a dynamic, collaborative environment. Key Responsibilities: Carry out assembly, disassembly, modification, and repair of aircraft systems, structures, electronics, and components. Troubleshoot complex mechanical systems, including pneumatic, hydraulic, and structural components. Deliver work in line with MAA Regulatory Articles (RA) , MRP Part 145 , Quality Assurance (QA) , and Safety Management Systems (SMS) . Ensure work meets approved technical standards and contractual requirements within your Responsibility, Accountability, and Authority (RAA) . Mentor apprentices or junior staff where required. Be flexible with work locations and schedules to meet programme deadlines. Contribute to continuous improvement and maintain a positive reporting culture. Qualifications & Experience: Recognised trade apprenticeship or equivalent mechanical/aircraft maintenance training. Knowledge of general aircraft maintenance and aviation processes, including Human Factors, FOD control, tool control, health & safety, and COSHH. Experience in commercial or defence aviation is advantageous. Strong technical, organisational, and communication skills. Proficient in Microsoft Office and other relevant IT systems. Demonstrates teamwork and commitment to equity, diversity, and inclusion. Work Authorisation & Security Clearance: Candidates must have the legal right to work in the UK. The role requires the ability to obtain UK Security Clearance (SC) ; UK residency is required. Why Work With Us: Short-term contract opportunities with competitive pay. Work on high-profile UK defence and aerospace programmes. Dynamic, collaborative, and supportive team culture. Strong focus on safety, first-time quality, and continuous improvement. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Vehicle Mechanic £39,000 Monday -Friday 08:00-16:00 This is an exciting chance for an experienced Vehicle Mechanic to work hands-on with specialist Ground Service Equipment (GSE) at the airport. From powerful towing tractors to precision baggage elevators, you ll be working on machines that keep aircraft moving and passengers flying. We are seeking an experienced Mechanic to join client at East Midlands Airport. You'll play a vital role in ensuring the smooth operation of our ground support equipment (GSE) fleet, keeping airside operations running efficiently and safely. Vehicle Mechanic-What You'll Do: Diagnose, troubleshoot, and repair a variety of GSE vehicles and equipment. Perform routine maintenance tasks to prevent breakdowns and ensure optimal performance. Maintain accurate and detailed service records for all GSE equipment. Collaborate with internal customers to understand their needs and provide exceptional service. Contribute to a safe work environment by adhering to all health and safety regulations. Participate in scheduled preventative maintenance (PPM) for GSE vehicles and equipment. Repair vehicles and plants as requested by the Workshop Supervisor Carry out inspections, brake and smoke tests and show all defects to the Workshop Supervisor before commencing with any repairs or booking out any parts Diagnose and inform the Workshop Supervisor of all work and parts required before commencing job Job card/inspection sheet must be completed correctly to current point of repair and handed to the Workshop Supervisor at the end of each day's shift. All non-productive time is also to be added to the correct job card for authorisation by the Workshop Supervisor Update the Workshop Supervisor of any further work or parts required immediately Present job cards at stores to enable parts to be supplied Inform the Workshop Supervisor of any VOR parts immediately All booked parts used from workshop must on the front of job cards and all parts taken out of hours must be written on parts sheet as confirmation Label parts and put them onto correct shelves, e.g. warranty or exchange unit Inform the Workshop Supervisor immediately upon job completion Quarantine, label and report all defective tooling immediately to the site Workshop Supervisor Report any defective items immediately to the Workshop Supervisor Accurately complete and hand in manual daily time sheet after each day of shift Vehicle Mechanic Experience: Minimum 5 years Salary: £39,000-£43,000 per annum Hours: Monday to Friday 0800AM-1600PM Location: EMA-based workshop, with occasional travel to Birmingham Airport Other Notes: Experience with GSE (Ground Support Equipment) is advantageous but not essential Heavy Goods Licence desirable
Sep 01, 2025
Full time
Vehicle Mechanic £39,000 Monday -Friday 08:00-16:00 This is an exciting chance for an experienced Vehicle Mechanic to work hands-on with specialist Ground Service Equipment (GSE) at the airport. From powerful towing tractors to precision baggage elevators, you ll be working on machines that keep aircraft moving and passengers flying. We are seeking an experienced Mechanic to join client at East Midlands Airport. You'll play a vital role in ensuring the smooth operation of our ground support equipment (GSE) fleet, keeping airside operations running efficiently and safely. Vehicle Mechanic-What You'll Do: Diagnose, troubleshoot, and repair a variety of GSE vehicles and equipment. Perform routine maintenance tasks to prevent breakdowns and ensure optimal performance. Maintain accurate and detailed service records for all GSE equipment. Collaborate with internal customers to understand their needs and provide exceptional service. Contribute to a safe work environment by adhering to all health and safety regulations. Participate in scheduled preventative maintenance (PPM) for GSE vehicles and equipment. Repair vehicles and plants as requested by the Workshop Supervisor Carry out inspections, brake and smoke tests and show all defects to the Workshop Supervisor before commencing with any repairs or booking out any parts Diagnose and inform the Workshop Supervisor of all work and parts required before commencing job Job card/inspection sheet must be completed correctly to current point of repair and handed to the Workshop Supervisor at the end of each day's shift. All non-productive time is also to be added to the correct job card for authorisation by the Workshop Supervisor Update the Workshop Supervisor of any further work or parts required immediately Present job cards at stores to enable parts to be supplied Inform the Workshop Supervisor of any VOR parts immediately All booked parts used from workshop must on the front of job cards and all parts taken out of hours must be written on parts sheet as confirmation Label parts and put them onto correct shelves, e.g. warranty or exchange unit Inform the Workshop Supervisor immediately upon job completion Quarantine, label and report all defective tooling immediately to the site Workshop Supervisor Report any defective items immediately to the Workshop Supervisor Accurately complete and hand in manual daily time sheet after each day of shift Vehicle Mechanic Experience: Minimum 5 years Salary: £39,000-£43,000 per annum Hours: Monday to Friday 0800AM-1600PM Location: EMA-based workshop, with occasional travel to Birmingham Airport Other Notes: Experience with GSE (Ground Support Equipment) is advantageous but not essential Heavy Goods Licence desirable
