18 Month Contract Monday to Friday - Flexible start and finish essential. 35 hours paid per week MAX. We have a fantastic and rare opportunity for an enthusiastic and proactive Senior Electronics Technicians to join a University s Electronics Team within Faculty of Science & Engineering (FSE). Essential Knowledge, Skills and Experience HNC/HND/Degree depending on practical experience. Experience and knowledge of programming microcontrollers in C/C++, ASM. Extensive experience of working in an electronics workshop/laboratory environment. Extensive knowledge of electronic and/or mechanical construction and repair techniques, surface mount technology, solder rework and repair. Experience with software packages for the design and fabrication of PCBs, programming microcontrollers, simulation software related to electronic circuits. Ability to work in a fast paced, busy teaching environment with a positive helpful attitude and commitment to problem solving. Able to cope and work under pressure and work to deadlines. Able to deal with staff at all levels in a pleasant, helpful, and efficient manner. Well organised. Good communicator. The Role: To deliver a reliable and comprehensive electronics support service across FSE. Provide an electronics service to staff and students to support teaching and research, with a commitment to excellent customer service. To demonstrate and teach in the School s teaching laboratories. Development, repair, and construction of specialised electronic equipment for research and teaching including PCB design using CAD software. Key Responsibilities, Accountabilities or Duties : Demonstrate and teach in undergraduate laboratory classes. Develop and plan, in collaboration with academic staff, laboratory experiments. Train postgraduate student demonstrators to enable them to perform at required level. Modification, maintenance, service, and repairs to electronic equipment in support of the Schools research, teaching and student projects. Calibration, fault diagnosis and testing of electrical and electronic equipment. Provide assistance and advice to academic, research staff and students on the selection, suitability and application of electronic circuits and equipment. Training of technical staff in workshop techniques and in the use of electronic equipment as directed by the workshop manager. Recording, tabulating of workload data in a workshop data base system. Preparation of circuit diagrams, drawings, and electronic specifications. Liaison with outside suppliers, ordering of equipment and materials and control of consumables stock. To undertake other duties commensurate with the grade and experience of the post-holder. Health and Safety To follow procedures appertaining to the safe operation of equipment and usage. To ensure continuing compliance with all health and safety regulations, undertaking appropriate staff training. To assist the workshop manager with the management of all health and safety matters in the School s workshop areas. General To act at all times in accordance with the University s policies and procedures relating to Equal Opportunities, Health and Safety, and all other policies and procedures, which apply to the post. To undertake appropriate training and development activities. Please apply online and phone Adam Dyson for further details. The Clever Fish Recruitment review all applications. However due to the high volume of applicants we receive, unfortunately we are not always able to respond to every applicant individually. If you ve not heard from us within 5 working days, on this occasion your application has not been successful. The Clever Fish Recruitment is acting as an Employment Business with regards to this vacancy. As an Equal Opportunities employer, we welcome applications regardless of race, gender, nationality, ethnic origin, sexual orientation, religion, marital status, disability, or age. All applicants are considered based on their merits and abilities for the job. By making an application to a job advertised by The Clever Fish Recruitment or providing your contact information to show interest in a job advertised by The Clever Fish Recruitment, you consent to the disclosure of your information to The Clever Fish Recruitment to assist our legitimate business needs. This includes agreeing for The Clever Fish Recruitment storing your information and allowing us to contact you regarding suitable job opportunities. You are within your rights to ask us to remove your information at any time.
Apr 30, 2024
Contractor
18 Month Contract Monday to Friday - Flexible start and finish essential. 35 hours paid per week MAX. We have a fantastic and rare opportunity for an enthusiastic and proactive Senior Electronics Technicians to join a University s Electronics Team within Faculty of Science & Engineering (FSE). Essential Knowledge, Skills and Experience HNC/HND/Degree depending on practical experience. Experience and knowledge of programming microcontrollers in C/C++, ASM. Extensive experience of working in an electronics workshop/laboratory environment. Extensive knowledge of electronic and/or mechanical construction and repair techniques, surface mount technology, solder rework and repair. Experience with software packages for the design and fabrication of PCBs, programming microcontrollers, simulation software related to electronic circuits. Ability to work in a fast paced, busy teaching environment with a positive helpful attitude and commitment to problem solving. Able to cope and work under pressure and work to deadlines. Able to deal with staff at all levels in a pleasant, helpful, and efficient manner. Well organised. Good communicator. The Role: To deliver a reliable and comprehensive electronics support service across FSE. Provide an electronics service to staff and students to support teaching and research, with a commitment to excellent customer service. To demonstrate and teach in the School s teaching laboratories. Development, repair, and construction of specialised electronic equipment for research and teaching including PCB design using CAD software. Key Responsibilities, Accountabilities or Duties : Demonstrate and teach in undergraduate laboratory classes. Develop and plan, in collaboration with academic staff, laboratory experiments. Train postgraduate student demonstrators to enable them to perform at required level. Modification, maintenance, service, and repairs to electronic equipment in support of the Schools research, teaching and student projects. Calibration, fault diagnosis and testing of electrical and electronic equipment. Provide assistance and advice to academic, research staff and students on the selection, suitability and application of electronic circuits and equipment. Training of technical staff in workshop techniques and in the use of electronic equipment as directed by the workshop manager. Recording, tabulating of workload data in a workshop data base system. Preparation of circuit diagrams, drawings, and electronic specifications. Liaison with outside suppliers, ordering of equipment and materials and control of consumables stock. To undertake other duties commensurate with the grade and experience of the post-holder. Health and Safety To follow procedures appertaining to the safe operation of equipment and usage. To ensure continuing compliance with all health and safety regulations, undertaking appropriate staff training. To assist the workshop manager with the management of all health and safety matters in the School s workshop areas. General To act at all times in accordance with the University s policies and procedures relating to Equal Opportunities, Health and Safety, and all other policies and procedures, which apply to the post. To undertake appropriate training and development activities. Please apply online and phone Adam Dyson for further details. The Clever Fish Recruitment review all applications. However due to the high volume of applicants we receive, unfortunately we are not always able to respond to every applicant individually. If you ve not heard from us within 5 working days, on this occasion your application has not been successful. The Clever Fish Recruitment is acting as an Employment Business with regards to this vacancy. As an Equal Opportunities employer, we welcome applications regardless of race, gender, nationality, ethnic origin, sexual orientation, religion, marital status, disability, or age. All applicants are considered based on their merits and abilities for the job. By making an application to a job advertised by The Clever Fish Recruitment or providing your contact information to show interest in a job advertised by The Clever Fish Recruitment, you consent to the disclosure of your information to The Clever Fish Recruitment to assist our legitimate business needs. This includes agreeing for The Clever Fish Recruitment storing your information and allowing us to contact you regarding suitable job opportunities. You are within your rights to ask us to remove your information at any time.
Senior Electrical Design Engineer vacanc reporting into the Head of R&D. Salary £50,000 + with hybrid working 2 or 3 days at home. As a Senior Electrical Electronic Engineer our client is a pioneering organisation encompassing research, innovation, development and manufacturing. Their focus is on providing industrial-standard training equipment globally, with an emphasis on Science, Engineering, and Technology. They offer a comprehensive range of products covering various subjects, from robotics and microcontrollers to electrical installation and automotive electrics. Their state-of-the-art facility in West Yorkshire houses advanced equipment, and their team of skilled technicians and engineers collaborates to ensure the production of rugged, long-lasting training equipment made in the UK. Job Description: This role involves joining our expanding R&D team as an electrical engineer, specialising as one of our design engineers responsible for creating products and solutions suitable for educational institutions. The successful candidate will contribute to our understanding of market trends and the latest technological developments, possessing a strong grasp of subject matter and adept technical writing skills as required. Key Responsibilities: Designing digital and analogue electronic systems for educational purposes. Programming experience, in PLC's Siemens, Rockwell, Allen Bradley. Preferably in C/C++ or equivalent languages. Proficiency in electronic system design software (PCB design environment). Generating bills of materials and cost estimates for production. Sourcing components and obtaining quotes for standard and bespoke items. Conducting design calculations and understanding relevant theories for educational equipment. Providing pragmatic, hands-on problem-solving for new product development and existing product requirements. Assisting in the creation of technical briefs for new products. Essential Requirements: Degree in Engineering or related field. 3+ years of experience in a similar engineering role. Embedded programming experience. Ability to work with electronic system design software. Strong organizational skills for bill of materials generation and costing estimates. Practical problem-solving skills. Understanding of educational market requirements. Desirable Skills:- SPICE simulation experience. VHDL/Verilog Design knowledge. Familiarity with communication buses and techniques. Proficiency in Python/PHP/Perl/MATLAB/LabVIEW/Siemens environments. Understanding of analogue and power electronics. Technical writing experience. Our client is an equal opportunities employer and welcomes applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation, or age. JBRP1_UKTJ
Apr 30, 2024
Full time
Senior Electrical Design Engineer vacanc reporting into the Head of R&D. Salary £50,000 + with hybrid working 2 or 3 days at home. As a Senior Electrical Electronic Engineer our client is a pioneering organisation encompassing research, innovation, development and manufacturing. Their focus is on providing industrial-standard training equipment globally, with an emphasis on Science, Engineering, and Technology. They offer a comprehensive range of products covering various subjects, from robotics and microcontrollers to electrical installation and automotive electrics. Their state-of-the-art facility in West Yorkshire houses advanced equipment, and their team of skilled technicians and engineers collaborates to ensure the production of rugged, long-lasting training equipment made in the UK. Job Description: This role involves joining our expanding R&D team as an electrical engineer, specialising as one of our design engineers responsible for creating products and solutions suitable for educational institutions. The successful candidate will contribute to our understanding of market trends and the latest technological developments, possessing a strong grasp of subject matter and adept technical writing skills as required. Key Responsibilities: Designing digital and analogue electronic systems for educational purposes. Programming experience, in PLC's Siemens, Rockwell, Allen Bradley. Preferably in C/C++ or equivalent languages. Proficiency in electronic system design software (PCB design environment). Generating bills of materials and cost estimates for production. Sourcing components and obtaining quotes for standard and bespoke items. Conducting design calculations and understanding relevant theories for educational equipment. Providing pragmatic, hands-on problem-solving for new product development and existing product requirements. Assisting in the creation of technical briefs for new products. Essential Requirements: Degree in Engineering or related field. 3+ years of experience in a similar engineering role. Embedded programming experience. Ability to work with electronic system design software. Strong organizational skills for bill of materials generation and costing estimates. Practical problem-solving skills. Understanding of educational market requirements. Desirable Skills:- SPICE simulation experience. VHDL/Verilog Design knowledge. Familiarity with communication buses and techniques. Proficiency in Python/PHP/Perl/MATLAB/LabVIEW/Siemens environments. Understanding of analogue and power electronics. Technical writing experience. Our client is an equal opportunities employer and welcomes applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation, or age. JBRP1_UKTJ
A fantastic opportunity has arisen to join an independent firm of professionals, specialising in the design, manufacture, and distribution of laser cutting/engraving systems, providing technical solutions to public and private sectors throughout the UK, Europe and Worldwide. Due to growth in the team, our client is looking for a candidate who has previous assembly experience, ideally both mechanical & electrical assembly. Training will be given regarding the finer aspects of their product assembly, but a good base of electronic & mechanical assembly IS required to start. Based at our clients HQ in Basildon, Essex. Working hours are Monday to Friday, 8.30am to 5pm. Salary in the region of 26,000 to 28,000 The suitable candidate will require mechanical as well as electronics skills. Training will be given to the right candidate in order for them to calibrate the systems, this is a test/measurement process via software. Salary 26- 28k depending on experience. This is a super opportunity for a candidate who has just a couple of years assembly experience but is looking for the next step on their career ladder.
Apr 30, 2024
Full time
A fantastic opportunity has arisen to join an independent firm of professionals, specialising in the design, manufacture, and distribution of laser cutting/engraving systems, providing technical solutions to public and private sectors throughout the UK, Europe and Worldwide. Due to growth in the team, our client is looking for a candidate who has previous assembly experience, ideally both mechanical & electrical assembly. Training will be given regarding the finer aspects of their product assembly, but a good base of electronic & mechanical assembly IS required to start. Based at our clients HQ in Basildon, Essex. Working hours are Monday to Friday, 8.30am to 5pm. Salary in the region of 26,000 to 28,000 The suitable candidate will require mechanical as well as electronics skills. Training will be given to the right candidate in order for them to calibrate the systems, this is a test/measurement process via software. Salary 26- 28k depending on experience. This is a super opportunity for a candidate who has just a couple of years assembly experience but is looking for the next step on their career ladder.
Technical Support Engineer - Automated Information Systems Location: Northwood, GB Contract Type: Full-time, On-site Duration: Initial 7-month contract (Extension Likely) Pay: 50 - 60 per hour (Dependent on Experience) Overview: Join a dynamic team as a Technical Support Engineer, providing essential support for Automated Information Systems (AIS). Under the direction of the AIS Core Section Head, you will play a crucial role in resolving technical issues and maintaining system functionality. Key Responsibilities: Provide enterprise-level support to resolve technical issues, primarily through the IT Service Management (ITSM) ticketing system. Coordinate incident resolution in alignment with Service Level Agreements (SLAs) and allocate resources efficiently. Perform day-to-day System Administration (SA) of hardware and software, including MS Windows Server and locally installed applications. Assist with AIS Core Release Management, operational documentation, and disaster recovery planning. Collaborate with stakeholders to develop technical input for project planning and troubleshooting strategies. Duties & Role: Maintain technical documentation and ensure Configuration Control data accuracy. Provide guidance to subordinate technicians and offer technical assistance to other staff. Contribute to the operation and maintenance of Audio, Video, and related systems. Stay informed about technological developments relevant to the role. Skills, Knowledge & Experience: Vocational training or secondary education with 3-5 years of relevant experience. Proficiency in System Administration, MS Windows Server, Active Directory, and MS Exchange Server. Strong troubleshooting skills and practical experience in diagnosing network issues. Familiarity with system software installation, maintenance, and updates. Ability to investigate and coordinate the resolution of service problems effectively. Requirements: NATO Secret Clearance or Equivalent required prior to commencing work. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Apr 30, 2024
Contractor
Technical Support Engineer - Automated Information Systems Location: Northwood, GB Contract Type: Full-time, On-site Duration: Initial 7-month contract (Extension Likely) Pay: 50 - 60 per hour (Dependent on Experience) Overview: Join a dynamic team as a Technical Support Engineer, providing essential support for Automated Information Systems (AIS). Under the direction of the AIS Core Section Head, you will play a crucial role in resolving technical issues and maintaining system functionality. Key Responsibilities: Provide enterprise-level support to resolve technical issues, primarily through the IT Service Management (ITSM) ticketing system. Coordinate incident resolution in alignment with Service Level Agreements (SLAs) and allocate resources efficiently. Perform day-to-day System Administration (SA) of hardware and software, including MS Windows Server and locally installed applications. Assist with AIS Core Release Management, operational documentation, and disaster recovery planning. Collaborate with stakeholders to develop technical input for project planning and troubleshooting strategies. Duties & Role: Maintain technical documentation and ensure Configuration Control data accuracy. Provide guidance to subordinate technicians and offer technical assistance to other staff. Contribute to the operation and maintenance of Audio, Video, and related systems. Stay informed about technological developments relevant to the role. Skills, Knowledge & Experience: Vocational training or secondary education with 3-5 years of relevant experience. Proficiency in System Administration, MS Windows Server, Active Directory, and MS Exchange Server. Strong troubleshooting skills and practical experience in diagnosing network issues. Familiarity with system software installation, maintenance, and updates. Ability to investigate and coordinate the resolution of service problems effectively. Requirements: NATO Secret Clearance or Equivalent required prior to commencing work. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
FINTEC recruit is looking for an Electronic Technician for our manufacturing electronics client based south of Edinburgh. This is a permanent position working within the production department. You will required to be apprentice trained or hold an HNC or HND in an electronics discipline. Experience of testing and fault finding is required for this role. Salary negotiable by experience plus benefits Responsibilities: Set up and maintain, calibrate and repair electronic and electro mechanical systems. Diagnose and repair faults Perform Tests and follow technical manuals to ensure correct operation of the system. Maintaining service and calibration records/documentation. Skills and experience required for the Electronic Technician role: Experience of testing and fault finding to component level, from working in an electronics environment Able to read circuit and engineering drawings Able to use measuring tools, multimeters etc Apprentice trained or electronically qualified with HNC or HND Full details of the Electronic Technician role is available on application. To apply please submit your current CV or apply via our FINTEC recruit web site
Apr 30, 2024
Full time
FINTEC recruit is looking for an Electronic Technician for our manufacturing electronics client based south of Edinburgh. This is a permanent position working within the production department. You will required to be apprentice trained or hold an HNC or HND in an electronics discipline. Experience of testing and fault finding is required for this role. Salary negotiable by experience plus benefits Responsibilities: Set up and maintain, calibrate and repair electronic and electro mechanical systems. Diagnose and repair faults Perform Tests and follow technical manuals to ensure correct operation of the system. Maintaining service and calibration records/documentation. Skills and experience required for the Electronic Technician role: Experience of testing and fault finding to component level, from working in an electronics environment Able to read circuit and engineering drawings Able to use measuring tools, multimeters etc Apprentice trained or electronically qualified with HNC or HND Full details of the Electronic Technician role is available on application. To apply please submit your current CV or apply via our FINTEC recruit web site
Rise Technical Recruitment Limited
Gillingham, Kent
Electronics Design Engineer £50,000 - £65,000 per annum + Progression + Excellent Benefits + Flexitime + Pension + Holidays Located in Gillingham (Commutable from: Rochester, Sittingbourne, Gravesend, Longfield, Aylesford, Maidstone) Are you an Electronics Design Engineer who is looking to join an ambitious company offering a varied role, excellent development opportunities, great work/life benefits and the opportunity to progress within the business?On offer is the chance to work for a well-established business, where you can grow your skill set and have the chance to significantly develop your career.This company is a specialist in the industry and have earned an exceptional reputation. They take great pride in their work and are equally dedicated to the satisfaction of their employees. They are an industry leader in fuel systems products, and due to their growth, they are looking to expand their design department.It is a Monday - Friday role, where you will be designing and improving new products, creating analogue and digital circuits, testing the products and documenting the process. An ideal candidate would have a degree in electronics/electrical engineering, electronics design experience and experience designing circuits.This is an excellent opportunity to work for a specialised, stable company who are recognised for looking after their employees, as well as providing excellent benefits and the chance to develop your career. The Role: Electronics Design Engineer Designing digital & power related circuits Monday - Friday (flexitime) The Person: Electronics Design experience Degree in electronics/electrical engineering Based around Gillingham Electronics, electronics engineer, electronics design engineer, design engineer, engineer, design technician, engineering degree, design, Gillingham, Rochester, Sittingbourne, Gravesend, Longfield, Aylesford, MaidstoneTo apply for this role or for to be considered for further roles, please click "Apply Now" or contact Bart Beavis at Rise Technical Recruitment.This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency.Rise Technical Recruitment Ltd regrets to inform that our client can only accept applications from engineering candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Apr 29, 2024
Full time
Electronics Design Engineer £50,000 - £65,000 per annum + Progression + Excellent Benefits + Flexitime + Pension + Holidays Located in Gillingham (Commutable from: Rochester, Sittingbourne, Gravesend, Longfield, Aylesford, Maidstone) Are you an Electronics Design Engineer who is looking to join an ambitious company offering a varied role, excellent development opportunities, great work/life benefits and the opportunity to progress within the business?On offer is the chance to work for a well-established business, where you can grow your skill set and have the chance to significantly develop your career.This company is a specialist in the industry and have earned an exceptional reputation. They take great pride in their work and are equally dedicated to the satisfaction of their employees. They are an industry leader in fuel systems products, and due to their growth, they are looking to expand their design department.It is a Monday - Friday role, where you will be designing and improving new products, creating analogue and digital circuits, testing the products and documenting the process. An ideal candidate would have a degree in electronics/electrical engineering, electronics design experience and experience designing circuits.This is an excellent opportunity to work for a specialised, stable company who are recognised for looking after their employees, as well as providing excellent benefits and the chance to develop your career. The Role: Electronics Design Engineer Designing digital & power related circuits Monday - Friday (flexitime) The Person: Electronics Design experience Degree in electronics/electrical engineering Based around Gillingham Electronics, electronics engineer, electronics design engineer, design engineer, engineer, design technician, engineering degree, design, Gillingham, Rochester, Sittingbourne, Gravesend, Longfield, Aylesford, MaidstoneTo apply for this role or for to be considered for further roles, please click "Apply Now" or contact Bart Beavis at Rise Technical Recruitment.This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency.Rise Technical Recruitment Ltd regrets to inform that our client can only accept applications from engineering candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Colt is the New Standard in high bandwidth network and voice services for enterprises and wholesale customers in Europe, Asia and North America's largest business hubs. With a global reach but a deep local presence, Colt is big enough to deliver and small enough to care. OSP Technician EU III Communication Excellent interpersonal and communications skills to deal with both internal and external clients as well as contractors, suppliers, Local Authorities & Transport Authorities. Job Detail General Summary Works independently under minimal supervision and is responsible for the delivery of specialist engineering expertise, Maintenance, Implementation and Support for the UK Rail Fibre Network, UK Backbone and UK Metro Fibre Network. Provide the necessary maintenance and quality checks on all Colt-NEO Core, Customer and Associated Network and Equipment Sites and team members, ensure Customer Satisfaction whilst achieving project deadlines and service levels to meet corporate targets within cost and quality parameters. Ensure Network Assurance and Network availability. May mentor and or train other Technicians. Essential Duties Maintains the security of the OSP network aerial, underground and/or trackside throughout the UK. Interacts with different organizations, Local Authorities, Police, Transport & Highway Authorities, customers, vendors, contractors, and building management to provide a high level of customer satisfaction. Manage and plans Lift & Shift (Diversions). Carries out the safety related duties and functions of COSS and SSOW Planner. Utilizes a variety of systems for the processing and reporting of work activities, inventorying OSP facilities, documentation of projects and managing various budgets to include new construction and route maintenance/protection. Owner of UK OSP network inventory for assigned market, responsible for the accuracy of routes, manholes, poles, spans/ducts, transmedia, splicing, fiber distribution panels, fiber to port connectivity and fiber assignments in corporate inventory systems. Manages contract and/or employee splicers during Network Splicing and Testing of Metro/Long Haul OSP. Provides on the job training to employees and oversees contractors to ensure the proper method and procedures of facility protection and maintenance are followed. Operates and maintains tools, test sets, and electronic equipment including: OTDR, ILM, PMD, CD, Acoustic Detectors, Plant Detection and Location equipment, Fiber optic transmissions equipment and Live Fibre Identifiers. Works closely with upstream groups, completing fiber verification requests, project estimating, design, bid, permit and manage OSP network activity. Monitors infrastructure builds and reviews punch lists and verifies work has met industry construction standards. Prepare timelines for the projects, prepare and track budgets and provide detailed weekly reports. Performs prevent/scheduled plant maintenance and inspections and directs emergency restoration and mitigation activities required for the OSP network. Included are fiber optic damages, natural disasters, power failures, and any other event that could affect operations. Initiates and plans Network Hardening Solutions in high risk/ vandalism/theft hot spot areas, compiles reports and cost implications for claims against responsible 3rd parties in the event of cable or plant damage. Experience Education Education Level: A Levels (UK) or equivalent Field of Study: Telecoms Engineering, Electronics, Installations or related field Will a combination of education and experience be considered? Yes Other Job Requirements Core Competencies: Focus on the Customer: Listens to customers (internal and external); identifying, meeting, and exceeding their needs, and anticipating their future needs; aligns what is done and how it is done with what the customers need, balancing that with what the organization requires. Drive Organizational Success: Delivers results even when faced with challenges; strives to exceed expectations, supports and encourages the development of others; strives to make Level 3 a great place to work; passionate about motivating others and encouraging personal belief in abilities. Demonstrate Agility: Focuses around continuous improvement; shows the ability to quickly solve day-to-day business problems; identifies new processes and frameworks for speed of delivery; accepts, responds, and initiates appropriate change. Lead Courageously: Confronts problems with courage; wins the respect and commitment of others by appropriately standing up for what he/she believes; makes tough decisions despite ambiguity, supports others who make difficult decisions, and follows issues through to completion in spite of adversity. Makes the best use of resources to deliver results, considering the financial impact of actions. Collaborate & Communicate: Builds effective relationships with others (internally and externally) so that he/she is enabled to deliver strong results; builds a broad base of support among key decision makers and influencers; incorporates team feedback into decision making yet does not require consensus; speaks with intention, fosters open communication, listens to others, and is able to effectively communicate verbally and through written communication to technical and non-technical audiences. Combined knowledge of both the Rail and Road telecoms environment with an OSP Engineering background and experience, conversant with the NRSWA, TMA and Network Rail regulations and Safety requirement; Experienced in complex Network Splicing and Testing and Fibre Characterization; Experience in management and supervision of Engineers/Contractors carrying out scheduled tasks and their planning is a requirement; Must have PTS, Site Warden, COSS/IWA certification & Rail Safety Awareness. Knowledge of Advanced OTDR & ILM testing and Advanced PMD & CD Characterization. City & Guilds 3466-02 Single Mode or 3466-03 Multi Mode fibre certification; Have a good working knowledge of the Traffic Management Act, UK Streetworks Permitting System; Must have excellent interpersonal and communications skills to deal with both internal and external clients as well as contractors, suppliers, Local Authorities & Transport Authorities; Position will require some on-call, travel and overtime requirements as dictated by business demands. Individual must have a passport, clean driving license and be physically able to complete manual type tasks; The post may be required to represent OSP at meetings and cover escalation duties as required; Personal Track Safety training associated medical and D&A screening are necessary essentials; All field activities are performed in line with pre-defined objectives, often quantified in metric terms, it is essential in this role the employees understands and performance against these departmental and company targets. In addition to offering competitive salaries and incentive plans, a range of benefits and local rewards packages are offered to staff. Colt recognises the importance of a work life balance. Some benefit examples are: Flexible working and relaxed dress code Two days annually to spend on volunteering opportunities Flexible benefits scheme Access to a virtual business school for on-going learning Business mentoring Job Segment: Facilities, Telecom, Telecommunications, Technician, Operations, Technology
Apr 29, 2024
Full time
Colt is the New Standard in high bandwidth network and voice services for enterprises and wholesale customers in Europe, Asia and North America's largest business hubs. With a global reach but a deep local presence, Colt is big enough to deliver and small enough to care. OSP Technician EU III Communication Excellent interpersonal and communications skills to deal with both internal and external clients as well as contractors, suppliers, Local Authorities & Transport Authorities. Job Detail General Summary Works independently under minimal supervision and is responsible for the delivery of specialist engineering expertise, Maintenance, Implementation and Support for the UK Rail Fibre Network, UK Backbone and UK Metro Fibre Network. Provide the necessary maintenance and quality checks on all Colt-NEO Core, Customer and Associated Network and Equipment Sites and team members, ensure Customer Satisfaction whilst achieving project deadlines and service levels to meet corporate targets within cost and quality parameters. Ensure Network Assurance and Network availability. May mentor and or train other Technicians. Essential Duties Maintains the security of the OSP network aerial, underground and/or trackside throughout the UK. Interacts with different organizations, Local Authorities, Police, Transport & Highway Authorities, customers, vendors, contractors, and building management to provide a high level of customer satisfaction. Manage and plans Lift & Shift (Diversions). Carries out the safety related duties and functions of COSS and SSOW Planner. Utilizes a variety of systems for the processing and reporting of work activities, inventorying OSP facilities, documentation of projects and managing various budgets to include new construction and route maintenance/protection. Owner of UK OSP network inventory for assigned market, responsible for the accuracy of routes, manholes, poles, spans/ducts, transmedia, splicing, fiber distribution panels, fiber to port connectivity and fiber assignments in corporate inventory systems. Manages contract and/or employee splicers during Network Splicing and Testing of Metro/Long Haul OSP. Provides on the job training to employees and oversees contractors to ensure the proper method and procedures of facility protection and maintenance are followed. Operates and maintains tools, test sets, and electronic equipment including: OTDR, ILM, PMD, CD, Acoustic Detectors, Plant Detection and Location equipment, Fiber optic transmissions equipment and Live Fibre Identifiers. Works closely with upstream groups, completing fiber verification requests, project estimating, design, bid, permit and manage OSP network activity. Monitors infrastructure builds and reviews punch lists and verifies work has met industry construction standards. Prepare timelines for the projects, prepare and track budgets and provide detailed weekly reports. Performs prevent/scheduled plant maintenance and inspections and directs emergency restoration and mitigation activities required for the OSP network. Included are fiber optic damages, natural disasters, power failures, and any other event that could affect operations. Initiates and plans Network Hardening Solutions in high risk/ vandalism/theft hot spot areas, compiles reports and cost implications for claims against responsible 3rd parties in the event of cable or plant damage. Experience Education Education Level: A Levels (UK) or equivalent Field of Study: Telecoms Engineering, Electronics, Installations or related field Will a combination of education and experience be considered? Yes Other Job Requirements Core Competencies: Focus on the Customer: Listens to customers (internal and external); identifying, meeting, and exceeding their needs, and anticipating their future needs; aligns what is done and how it is done with what the customers need, balancing that with what the organization requires. Drive Organizational Success: Delivers results even when faced with challenges; strives to exceed expectations, supports and encourages the development of others; strives to make Level 3 a great place to work; passionate about motivating others and encouraging personal belief in abilities. Demonstrate Agility: Focuses around continuous improvement; shows the ability to quickly solve day-to-day business problems; identifies new processes and frameworks for speed of delivery; accepts, responds, and initiates appropriate change. Lead Courageously: Confronts problems with courage; wins the respect and commitment of others by appropriately standing up for what he/she believes; makes tough decisions despite ambiguity, supports others who make difficult decisions, and follows issues through to completion in spite of adversity. Makes the best use of resources to deliver results, considering the financial impact of actions. Collaborate & Communicate: Builds effective relationships with others (internally and externally) so that he/she is enabled to deliver strong results; builds a broad base of support among key decision makers and influencers; incorporates team feedback into decision making yet does not require consensus; speaks with intention, fosters open communication, listens to others, and is able to effectively communicate verbally and through written communication to technical and non-technical audiences. Combined knowledge of both the Rail and Road telecoms environment with an OSP Engineering background and experience, conversant with the NRSWA, TMA and Network Rail regulations and Safety requirement; Experienced in complex Network Splicing and Testing and Fibre Characterization; Experience in management and supervision of Engineers/Contractors carrying out scheduled tasks and their planning is a requirement; Must have PTS, Site Warden, COSS/IWA certification & Rail Safety Awareness. Knowledge of Advanced OTDR & ILM testing and Advanced PMD & CD Characterization. City & Guilds 3466-02 Single Mode or 3466-03 Multi Mode fibre certification; Have a good working knowledge of the Traffic Management Act, UK Streetworks Permitting System; Must have excellent interpersonal and communications skills to deal with both internal and external clients as well as contractors, suppliers, Local Authorities & Transport Authorities; Position will require some on-call, travel and overtime requirements as dictated by business demands. Individual must have a passport, clean driving license and be physically able to complete manual type tasks; The post may be required to represent OSP at meetings and cover escalation duties as required; Personal Track Safety training associated medical and D&A screening are necessary essentials; All field activities are performed in line with pre-defined objectives, often quantified in metric terms, it is essential in this role the employees understands and performance against these departmental and company targets. In addition to offering competitive salaries and incentive plans, a range of benefits and local rewards packages are offered to staff. Colt recognises the importance of a work life balance. Some benefit examples are: Flexible working and relaxed dress code Two days annually to spend on volunteering opportunities Flexible benefits scheme Access to a virtual business school for on-going learning Business mentoring Job Segment: Facilities, Telecom, Telecommunications, Technician, Operations, Technology
Want to get paid to learn skills for life? You Belong Here. As a full-time soldier, entry-level Engineering role, you'll: Keep the Army's equipment working and ready to use Build bridges, repair roads, and rebuild infrastructure across the world Study for advanced trade qualifications in plumbing and electrical engineering Travel with your unit wherever they go - at home or overseas Engineering in the Army includes many roles, you could work as an Electronics Technician, Recovery Mechanic, Plumber or Plasterer. Whichever route you take, you'll work alongside your friends, and you'll find a team where you can belong. To qualify, you must be between 16 years 6 months and 35 years 6 months and pass a basic fitness test. Set yourself up for life. During your initial training, you'll earn £18,687, after which your salary will rise to £23,496. You'll also receive 30 days' annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training with us, you'll be gaining transferrable skills - skills that could set you up for life. You don't need to know how to do the job before you get here, because we'll give you all the entry-level training you need. Plus, you'll get to travel the world, taking part in the Army's adventurous training, and spending dedicated time playing the sports you love. Job Type: Full-time Pay: From £23,496.00 per year Benefits: Company pension Discounted or free food Free or subsidised travel On-site parking Schedule: Monday to Friday Supplemental pay types: Signing bonus Work Location: In person
Apr 29, 2024
Full time
Want to get paid to learn skills for life? You Belong Here. As a full-time soldier, entry-level Engineering role, you'll: Keep the Army's equipment working and ready to use Build bridges, repair roads, and rebuild infrastructure across the world Study for advanced trade qualifications in plumbing and electrical engineering Travel with your unit wherever they go - at home or overseas Engineering in the Army includes many roles, you could work as an Electronics Technician, Recovery Mechanic, Plumber or Plasterer. Whichever route you take, you'll work alongside your friends, and you'll find a team where you can belong. To qualify, you must be between 16 years 6 months and 35 years 6 months and pass a basic fitness test. Set yourself up for life. During your initial training, you'll earn £18,687, after which your salary will rise to £23,496. You'll also receive 30 days' annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training with us, you'll be gaining transferrable skills - skills that could set you up for life. You don't need to know how to do the job before you get here, because we'll give you all the entry-level training you need. Plus, you'll get to travel the world, taking part in the Army's adventurous training, and spending dedicated time playing the sports you love. Job Type: Full-time Pay: From £23,496.00 per year Benefits: Company pension Discounted or free food Free or subsidised travel On-site parking Schedule: Monday to Friday Supplemental pay types: Signing bonus Work Location: In person
Unlock your Potential with a Trescal Apprenticeship If you are looking to develop a career in the engineering sector, gain new skills and work for a growing and diverse global company that offers flexible working, then this role is for you . Trescal is the global independent expert in calibration services. Each year, companies active in the aerospace, automotive, pharmaceutical, chemical, energy, electronics and telecommunication sectors entrust Trescal with their calibration needs. We have an exciting opportunity for you to be part of our newly created Apprentice programme. About the Role You will be trained to calibrate and optimise a wide range of measuring instrumentation and learn to fault find and repair equipment You will be required to perform in accordance with our Quality System and Company Procedures that are internally & externally audited to ISO9001 and ISO17025 by BSI and UKAS. This 4 year programme will include: NVQ Level 3 & BTEC Diploma Level 3 (Level 7 Scotland) in Engineering Calibration Fundamentals In house training rotating across various calibration disciplines e.g. pressure, temperature, electrical, in UKAS accredited laboratories Personal development courses with external training provider Microsoft software packages Start date: Start dates are flexible depending on individual circumstances, but no later than 1st September 2024 to align with college course start dates. Future Prospects: Upon completion of your Apprenticeship, you will be a qualified Calibration Engineer and hold UKAS signatory status. Your further development will move you to a Senior Engineer, Technical Lead, Technical Specialist or Management role. There is also the opportunity to further develop your formal qualifications. Benefits Salary starting from £19,000 per year, with regular increments throughout the year Flexible working options to suit your college requirements Continuous development and training plan with individually assigned mentor 25 days holiday and the option to buy/sell days Access to the Trescal PerksHub, employee well-being programme & Medical Health Cash Plan Gym membership discounts & Cycle-to-work scheme Pension and Life Assurance Scheme Essential Skills Minimum of 5 GCSE's including English and Maths at grade 4 or higher or in Scotland National 5 grade A-C in English, Math and Science PC literacy and knowledge of Microsoft software Proactive approach to learning and problem-solving Good interpersonal and communication skills Ability to attend college weekly in term time About Company Trescal is the global leader in calibration services, offering an array of industries a single source for measurement, repair and asset management across the globe. Starting in 1999, Trescal is an international group with over 5,000 employees across 31 countries with a 20% growth rate. We drive environmental sustainability by minimizing our impact on climate, energy and waste. As a service company, we reduce our carbon footprint most notably through environmentally conscious actions at our sites and for our vehicle fleet. We aim to reach carbon neutrality by 2040. Visit our or follow /trescal Our Values
Apr 29, 2024
Full time
Unlock your Potential with a Trescal Apprenticeship If you are looking to develop a career in the engineering sector, gain new skills and work for a growing and diverse global company that offers flexible working, then this role is for you . Trescal is the global independent expert in calibration services. Each year, companies active in the aerospace, automotive, pharmaceutical, chemical, energy, electronics and telecommunication sectors entrust Trescal with their calibration needs. We have an exciting opportunity for you to be part of our newly created Apprentice programme. About the Role You will be trained to calibrate and optimise a wide range of measuring instrumentation and learn to fault find and repair equipment You will be required to perform in accordance with our Quality System and Company Procedures that are internally & externally audited to ISO9001 and ISO17025 by BSI and UKAS. This 4 year programme will include: NVQ Level 3 & BTEC Diploma Level 3 (Level 7 Scotland) in Engineering Calibration Fundamentals In house training rotating across various calibration disciplines e.g. pressure, temperature, electrical, in UKAS accredited laboratories Personal development courses with external training provider Microsoft software packages Start date: Start dates are flexible depending on individual circumstances, but no later than 1st September 2024 to align with college course start dates. Future Prospects: Upon completion of your Apprenticeship, you will be a qualified Calibration Engineer and hold UKAS signatory status. Your further development will move you to a Senior Engineer, Technical Lead, Technical Specialist or Management role. There is also the opportunity to further develop your formal qualifications. Benefits Salary starting from £19,000 per year, with regular increments throughout the year Flexible working options to suit your college requirements Continuous development and training plan with individually assigned mentor 25 days holiday and the option to buy/sell days Access to the Trescal PerksHub, employee well-being programme & Medical Health Cash Plan Gym membership discounts & Cycle-to-work scheme Pension and Life Assurance Scheme Essential Skills Minimum of 5 GCSE's including English and Maths at grade 4 or higher or in Scotland National 5 grade A-C in English, Math and Science PC literacy and knowledge of Microsoft software Proactive approach to learning and problem-solving Good interpersonal and communication skills Ability to attend college weekly in term time About Company Trescal is the global leader in calibration services, offering an array of industries a single source for measurement, repair and asset management across the globe. Starting in 1999, Trescal is an international group with over 5,000 employees across 31 countries with a 20% growth rate. We drive environmental sustainability by minimizing our impact on climate, energy and waste. As a service company, we reduce our carbon footprint most notably through environmentally conscious actions at our sites and for our vehicle fleet. We aim to reach carbon neutrality by 2040. Visit our or follow /trescal Our Values
Right Now Group are currently partnered with an International Software client and industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Field Service Engineering team in the Manchester region after a continued period of sustained growth. If you are an experienced field-based Electrician/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! Vehicle Mechanics / Electronics / Re-manufacturing/Assembly / General Maintenance/Engineering / Facilities Maintenance IMPORTANT: Full Training will be provided as well as a company van - please note all applicants must have a full drivers license due to the nature of this role. Job Title: Field Service Engineer Weekly Hours: 40 hours (flexible) 5 in 7 days worked Salary: £28k - £31k Role Type : Full - Time, Temp to Perm Location: Manchester- Field Based Role Description Carry out Remedial Maintenance initiated by customer requests for service as directed Partake in and carry out machine installations and commissioning as required Ensure that all Technical Documentation is kept available and up to date Ensure that at all times you promote the Best Practise approach to your duties Complete all necessary Work Dockets and Reports as part of the Service and Maintenance procedures Assistance in maintenance of organisational charts for customers as a basis for the Networking Assisting in producing weekly and monthly reports Desirable Previous experience in a Field Service Engineering or Technician role Mechanical/Electrical knowledge, previous experience in maintenance or some form of mechanics/electrics Experience in working out on the road from a van or car Good customer relationship skills Flexible approach to working hours and days Able to work under pressure Have good problem-solving acumen Able to both work independently and also as part of a team
Apr 28, 2024
Full time
Right Now Group are currently partnered with an International Software client and industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Field Service Engineering team in the Manchester region after a continued period of sustained growth. If you are an experienced field-based Electrician/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! Vehicle Mechanics / Electronics / Re-manufacturing/Assembly / General Maintenance/Engineering / Facilities Maintenance IMPORTANT: Full Training will be provided as well as a company van - please note all applicants must have a full drivers license due to the nature of this role. Job Title: Field Service Engineer Weekly Hours: 40 hours (flexible) 5 in 7 days worked Salary: £28k - £31k Role Type : Full - Time, Temp to Perm Location: Manchester- Field Based Role Description Carry out Remedial Maintenance initiated by customer requests for service as directed Partake in and carry out machine installations and commissioning as required Ensure that all Technical Documentation is kept available and up to date Ensure that at all times you promote the Best Practise approach to your duties Complete all necessary Work Dockets and Reports as part of the Service and Maintenance procedures Assistance in maintenance of organisational charts for customers as a basis for the Networking Assisting in producing weekly and monthly reports Desirable Previous experience in a Field Service Engineering or Technician role Mechanical/Electrical knowledge, previous experience in maintenance or some form of mechanics/electrics Experience in working out on the road from a van or car Good customer relationship skills Flexible approach to working hours and days Able to work under pressure Have good problem-solving acumen Able to both work independently and also as part of a team
Manufacturing Engineer Location: Rochester - Onsite Salary: 35,000 - 50,000 (depending on level of experience) + Benefits We will be taking interviews Immediately so if you are interested, please contact Zoe to get you interview booked for this week Key Skills : Experience working in a manufacturing environment. Defence/Aerospace/Automotive background ideally. We are looking for a Manufacturing Engineer to join a Leading Defence and Aerospace Organisation. As a Manufacturing Engineer, your contribution will be essential in facilitating the production of both present and forthcoming products across the complete range and throughout the entire program lifecycle. Collaborating closely with stakeholders in Manufacturing and Engineering, your expertise will be instrumental in enhancing the manufacturing systems and processes. From the initial bid phase through new product introduction, production, and repair, your role will ensure that product quality aligns with the schedule and budget objectives. The Role: So, what will you be doing as a Manufacturing Engineer? Collaborating within Manufacturing Engineering team to support programs throughout their entire lifecycle. Developing and enhancing processes and protocols to ensure the efficient and effective manufacturing of products, utilising PDM, ERP, and MES tools to generate assembly build instructions. Designing and implementing jigs, tools, and fixtures to streamline product assembly for Technicians. Cultivating and maintaining shop floor manufacturing lines, cells, and equipment to foster a safe and efficient manufacturing environment. Engaging in process mapping, cell layouts, TAKT time calculations, lean methodologies, visual management, business case justifications, and collaborating with key stakeholders to facilitate the setup of new factories. Analysing build times and support activity durations, forecasting future targets, and refining processes to meet production goals in line with product specifications and business needs. Driving the establishment of a robust Lean culture and spearheading continuous improvement initiatives to support strategic objectives such as the integration of Industry 4.0 digital manufacturing practices. What are we looking for in our next Manufacturing Engineer? Experience : Essential Qualification in a relevant engineering discipline or time served in a similar role (HNC/Degree) Knowledge and understanding of modern Manufacturing Engineering practices, tools and technology gained from experience working in a manufacturing environment. Experience in interpreting engineering drawings to create manufacturing assembly instructions/standard operating procedures. Desirable Demonstrable success in utilising Lean manufacturing tools and techniques in the context of process improvement, cost savings or waste elimination Experience in the application of Continuous Improvement and Root Cause & Corrective Action tools and techniques such as 5Y, 8D, PDCA, FMEA, fish bone and TPM Experience gained within an electronics or electro-mechanical environment would be highly advantageous My client is keen to get this position filled ASAP, so if you feel you have the skills and desire as the next Manufacturing Engineer this is the opportunity for you! How to Apply: Please send your cv and call me on (phone number removed) Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Apr 26, 2024
Full time
Manufacturing Engineer Location: Rochester - Onsite Salary: 35,000 - 50,000 (depending on level of experience) + Benefits We will be taking interviews Immediately so if you are interested, please contact Zoe to get you interview booked for this week Key Skills : Experience working in a manufacturing environment. Defence/Aerospace/Automotive background ideally. We are looking for a Manufacturing Engineer to join a Leading Defence and Aerospace Organisation. As a Manufacturing Engineer, your contribution will be essential in facilitating the production of both present and forthcoming products across the complete range and throughout the entire program lifecycle. Collaborating closely with stakeholders in Manufacturing and Engineering, your expertise will be instrumental in enhancing the manufacturing systems and processes. From the initial bid phase through new product introduction, production, and repair, your role will ensure that product quality aligns with the schedule and budget objectives. The Role: So, what will you be doing as a Manufacturing Engineer? Collaborating within Manufacturing Engineering team to support programs throughout their entire lifecycle. Developing and enhancing processes and protocols to ensure the efficient and effective manufacturing of products, utilising PDM, ERP, and MES tools to generate assembly build instructions. Designing and implementing jigs, tools, and fixtures to streamline product assembly for Technicians. Cultivating and maintaining shop floor manufacturing lines, cells, and equipment to foster a safe and efficient manufacturing environment. Engaging in process mapping, cell layouts, TAKT time calculations, lean methodologies, visual management, business case justifications, and collaborating with key stakeholders to facilitate the setup of new factories. Analysing build times and support activity durations, forecasting future targets, and refining processes to meet production goals in line with product specifications and business needs. Driving the establishment of a robust Lean culture and spearheading continuous improvement initiatives to support strategic objectives such as the integration of Industry 4.0 digital manufacturing practices. What are we looking for in our next Manufacturing Engineer? Experience : Essential Qualification in a relevant engineering discipline or time served in a similar role (HNC/Degree) Knowledge and understanding of modern Manufacturing Engineering practices, tools and technology gained from experience working in a manufacturing environment. Experience in interpreting engineering drawings to create manufacturing assembly instructions/standard operating procedures. Desirable Demonstrable success in utilising Lean manufacturing tools and techniques in the context of process improvement, cost savings or waste elimination Experience in the application of Continuous Improvement and Root Cause & Corrective Action tools and techniques such as 5Y, 8D, PDCA, FMEA, fish bone and TPM Experience gained within an electronics or electro-mechanical environment would be highly advantageous My client is keen to get this position filled ASAP, so if you feel you have the skills and desire as the next Manufacturing Engineer this is the opportunity for you! How to Apply: Please send your cv and call me on (phone number removed) Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
AWE has an exciting opportunity for a Nuclear Security Specialist to join our Nuclear Threat Reduction (NTR) Operations Team, bringing their experience to AWE and to successfully playing a key role in delivering for our customers. Nuclear Threat Reduction supports Government organisations in exploiting AWE's wealth of radiological and nuclear knowledge, developing and delivering national security capabilities in support of the UK CONTEST Strategy. Nuclear Security Specialist - NTR Operations Location: Reading Salary: £33,770 - £42,000 (dependent on experience) Closing Date: 20th April 2024 As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: - Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) - Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time - Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training - Employee Assistance Programme and Occupational Health Services - A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) - Life Assurance - Discounts - access to savings on a wide range of everyday spending - Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family - A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site This role in NTR Operations is suitable for graduate and experienced hires alike, and will heavily utilise soft skills, engaging with policy makers, technical specialists, and end-users. A strong team working ethic and understanding of scientific process and technologies is helpful, particularly nuclear weapon-related sciences, radiation detection technologies, emergency planning, weapons effects, forensics, render-safe techniques, electronics, or computational modelling. The candidate will need to work in a dynamic and team orientated environment, sometimes working in a hands-on role. We would welcome applications from candidates who can demonstrate knowledge or experience in the following : Physics Mechanical Engineering Electrical Engineering (including electronics technicians or similar) Computer science Disaster/Emergency Management (including planning, coordination, or response) CBRN Sciences (particularly in Operational Deployment, or in Technical Support) Nuclear security or counter terrorism Maintaining operational equipment (particularly deployed/operational sensors) Key Accountabilities: Undertaking operational capability development tasks to schedule, cost and quality in support to the Nuclear Threat Reduction (NTR) Operations programme. Support the development and deployment of the AWE operational response capabilities, Support training of police and military responders, and the development of their capabilities, ensuring that they are equipped to deal with high-threat national security environments. Supporting the development of an overarching configuration control and maintenance for specialist detection instruments; applying appropriate policies and techniques to ensure they are appropriately maintained, stored and configured against agreed processes and procedures. Completing specific operational planning, capability development or capability management tasks, including: Operational assessment and analysis, Options studies for operational capabilities, Preparing, issuing, and maintaining plans for operational response, capability management, and validation exercises, Analysis, development, design and delivery of training courses for NTR operational responders, NTR staff and national security end-users, Procurement, configuration and through life management of operational equipment and other assets, Supporting quality assurance in areas such as electrical testing and calibration of instruments, Planning delivering and reporting on exercises and associated validation activities, Capturing and recording lessons and gaps identified and coordinating action plans, Providing UK government policy partners, and operational end-users, including the military, police and other emergency response partner agencies with timely and accurate advice, Providing a fit for purpose technology or capability used by the operational response team that meet customer expectations (including configuration, maintenance and quality control). The requirement of this post may also require the successful applicant to undertake travel across the UK and also abroad if required; and to work extended periods away from home. AWE may require you to fulfil any other reasonable duties aligned to your position from time to time, in line with business needs. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Apr 26, 2024
Full time
AWE has an exciting opportunity for a Nuclear Security Specialist to join our Nuclear Threat Reduction (NTR) Operations Team, bringing their experience to AWE and to successfully playing a key role in delivering for our customers. Nuclear Threat Reduction supports Government organisations in exploiting AWE's wealth of radiological and nuclear knowledge, developing and delivering national security capabilities in support of the UK CONTEST Strategy. Nuclear Security Specialist - NTR Operations Location: Reading Salary: £33,770 - £42,000 (dependent on experience) Closing Date: 20th April 2024 As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: - Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) - Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time - Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training - Employee Assistance Programme and Occupational Health Services - A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) - Life Assurance - Discounts - access to savings on a wide range of everyday spending - Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family - A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site This role in NTR Operations is suitable for graduate and experienced hires alike, and will heavily utilise soft skills, engaging with policy makers, technical specialists, and end-users. A strong team working ethic and understanding of scientific process and technologies is helpful, particularly nuclear weapon-related sciences, radiation detection technologies, emergency planning, weapons effects, forensics, render-safe techniques, electronics, or computational modelling. The candidate will need to work in a dynamic and team orientated environment, sometimes working in a hands-on role. We would welcome applications from candidates who can demonstrate knowledge or experience in the following : Physics Mechanical Engineering Electrical Engineering (including electronics technicians or similar) Computer science Disaster/Emergency Management (including planning, coordination, or response) CBRN Sciences (particularly in Operational Deployment, or in Technical Support) Nuclear security or counter terrorism Maintaining operational equipment (particularly deployed/operational sensors) Key Accountabilities: Undertaking operational capability development tasks to schedule, cost and quality in support to the Nuclear Threat Reduction (NTR) Operations programme. Support the development and deployment of the AWE operational response capabilities, Support training of police and military responders, and the development of their capabilities, ensuring that they are equipped to deal with high-threat national security environments. Supporting the development of an overarching configuration control and maintenance for specialist detection instruments; applying appropriate policies and techniques to ensure they are appropriately maintained, stored and configured against agreed processes and procedures. Completing specific operational planning, capability development or capability management tasks, including: Operational assessment and analysis, Options studies for operational capabilities, Preparing, issuing, and maintaining plans for operational response, capability management, and validation exercises, Analysis, development, design and delivery of training courses for NTR operational responders, NTR staff and national security end-users, Procurement, configuration and through life management of operational equipment and other assets, Supporting quality assurance in areas such as electrical testing and calibration of instruments, Planning delivering and reporting on exercises and associated validation activities, Capturing and recording lessons and gaps identified and coordinating action plans, Providing UK government policy partners, and operational end-users, including the military, police and other emergency response partner agencies with timely and accurate advice, Providing a fit for purpose technology or capability used by the operational response team that meet customer expectations (including configuration, maintenance and quality control). The requirement of this post may also require the successful applicant to undertake travel across the UK and also abroad if required; and to work extended periods away from home. AWE may require you to fulfil any other reasonable duties aligned to your position from time to time, in line with business needs. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. Overview: Following planned expansion, the company are looking to recruit a customer-focused support technician responsible for the service, installation, repair and general maintenance of our highly advanced surveillance systems, with a particular emphasis on supporting the Customer's own mechanics and engineers on-site, in either a Weapon Locating or GBAD setting. In this position, you will be working with hydraulics, high power components (AC and DC), software loading / programming, engines, power plants, electronics, cooling systems, communication systems and data links. The ability and willingness to travel, including internationally, will be essential for this role. The successful candidate will have the potential to grow the position as the business grows and will benefit from continuous training across the equipment spectrum. Main Tasks: Planned and preventative maintenance (to include updating of schedules) System Integration Support to Communication and data links Support of other Business areas: Manning customer support desks (hotlines) Training end users, including planning and scheduling and associated documentation Assist with production at OEM Support to: Trials Exercise Deployment Globally in support of military operations Other company market growth Reporting and administering the running of projects as required Key Requirements: Computer literate Knowledge of radar systems Full UK driving licence Previous Experience in a technical customer facing environment demonstrating fault finding abilities in a high pressure environment Able to obtain UK Security Clearance up to SC During your employment you will handle tasks and materials that are classed as military secrets and therefore you must have a UK or Swedish citizenship Be a motivated and critical thinking individual Be capable of working alone and arranging their own workload Have excellent interpersonal skills Be comfortable in a complex customer facing environment Qualifications/Experience: Qualified to ONC / HNC level or equivalent experience in technical area Multi-skilled electrical bias Previous military experience would be an advantage Teaching experience would be an advantage
Apr 26, 2024
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. Overview: Following planned expansion, the company are looking to recruit a customer-focused support technician responsible for the service, installation, repair and general maintenance of our highly advanced surveillance systems, with a particular emphasis on supporting the Customer's own mechanics and engineers on-site, in either a Weapon Locating or GBAD setting. In this position, you will be working with hydraulics, high power components (AC and DC), software loading / programming, engines, power plants, electronics, cooling systems, communication systems and data links. The ability and willingness to travel, including internationally, will be essential for this role. The successful candidate will have the potential to grow the position as the business grows and will benefit from continuous training across the equipment spectrum. Main Tasks: Planned and preventative maintenance (to include updating of schedules) System Integration Support to Communication and data links Support of other Business areas: Manning customer support desks (hotlines) Training end users, including planning and scheduling and associated documentation Assist with production at OEM Support to: Trials Exercise Deployment Globally in support of military operations Other company market growth Reporting and administering the running of projects as required Key Requirements: Computer literate Knowledge of radar systems Full UK driving licence Previous Experience in a technical customer facing environment demonstrating fault finding abilities in a high pressure environment Able to obtain UK Security Clearance up to SC During your employment you will handle tasks and materials that are classed as military secrets and therefore you must have a UK or Swedish citizenship Be a motivated and critical thinking individual Be capable of working alone and arranging their own workload Have excellent interpersonal skills Be comfortable in a complex customer facing environment Qualifications/Experience: Qualified to ONC / HNC level or equivalent experience in technical area Multi-skilled electrical bias Previous military experience would be an advantage Teaching experience would be an advantage
Job description We have an opening for our client situated in Oldham who are currently looking for candidates with a track record in electronic repairing/Assembling/Testing & Fault Finding. The clients product portfolio ranges across a broad range of home and and domestic electrical items (SDA). Overall Job Function To test and repair a range of consumer and/or IT related products to the required sta click apply for full job details
Apr 26, 2024
Full time
Job description We have an opening for our client situated in Oldham who are currently looking for candidates with a track record in electronic repairing/Assembling/Testing & Fault Finding. The clients product portfolio ranges across a broad range of home and and domestic electrical items (SDA). Overall Job Function To test and repair a range of consumer and/or IT related products to the required sta click apply for full job details
Job Summary Our client, a leading manufacturing company, is seeking a dedicated and detail-oriented Service Centre Planning Technician to join their team. In this role, you will be responsible for analysing and validating customer service Return Merchandise Authorisation (RMA) requests, planning RMAs, and coordinating resources efficiently with the manager. As the primary point of contact with Customer Service Representatives (CSRs), you will play a crucial role in maintaining inventory levels of service-related materials. If you have a strong background in planning, excellent communication skills, and a passion for delivering exceptional service, we encourage you to apply. What You'll Do Repair Triage: Analyse and validate customer service requests to determine appropriate action and make necessary changes. Prioritise repair tasks based on urgency and customer needs. RMA Planning: Utilise SAP to efficiently plan and coordinate RMAs within the Service Centre load. Ensure timely processing and tracking of RMAs to meet service level agreements. Resource Coordination: Collaborate with the manager or service coordinator to allocate resources effectively for service tasks. Coordinate technician schedules and assignments to optimise productivity. Point of Contact: Serve as the primary point of contact with Customer Service Representatives (CSRs) to address customer inquiries and concerns. Provide regular updates on service statuses and resolutions to CSRs. Inventory Maintenance: Manage and maintain inventory levels of Service Centre materials and equipment. Request purchases to restock as needed. What We're Looking For Familiarity with electronic test equipment to facilitate efficient troubleshooting and understanding of repair processes. Knowledge of products and software applications is a plus. Experience with ERP software systems, ideally SAP, to effectively manage RMA planning and other service-related tasks. Proficiency in Microsoft Word and Excel for documentation, reporting, and data analysis purposes. Ability to work independently and take ownership of tasks to ensure timely completion. Adaptability to changing priorities and the ability to work efficiently in a fast-paced environment. Excellent verbal and written communication skills to interact effectively with internal teams and external stakeholders. Strong collaborative skills to work cohesively within a team and contribute to achieving common goals. Education: BTEC/City guilds in Electronics. Experience: Minimum 2-3 years of electronic test equipment service experience with a good understanding of electronics. Knowledge of optical equipment is beneficial. Language Requirement: Fluent in English. If you are a self-motivated individual with a passion for delivering exceptional service, our client would love to hear from you. Apply now!
Apr 26, 2024
Full time
Job Summary Our client, a leading manufacturing company, is seeking a dedicated and detail-oriented Service Centre Planning Technician to join their team. In this role, you will be responsible for analysing and validating customer service Return Merchandise Authorisation (RMA) requests, planning RMAs, and coordinating resources efficiently with the manager. As the primary point of contact with Customer Service Representatives (CSRs), you will play a crucial role in maintaining inventory levels of service-related materials. If you have a strong background in planning, excellent communication skills, and a passion for delivering exceptional service, we encourage you to apply. What You'll Do Repair Triage: Analyse and validate customer service requests to determine appropriate action and make necessary changes. Prioritise repair tasks based on urgency and customer needs. RMA Planning: Utilise SAP to efficiently plan and coordinate RMAs within the Service Centre load. Ensure timely processing and tracking of RMAs to meet service level agreements. Resource Coordination: Collaborate with the manager or service coordinator to allocate resources effectively for service tasks. Coordinate technician schedules and assignments to optimise productivity. Point of Contact: Serve as the primary point of contact with Customer Service Representatives (CSRs) to address customer inquiries and concerns. Provide regular updates on service statuses and resolutions to CSRs. Inventory Maintenance: Manage and maintain inventory levels of Service Centre materials and equipment. Request purchases to restock as needed. What We're Looking For Familiarity with electronic test equipment to facilitate efficient troubleshooting and understanding of repair processes. Knowledge of products and software applications is a plus. Experience with ERP software systems, ideally SAP, to effectively manage RMA planning and other service-related tasks. Proficiency in Microsoft Word and Excel for documentation, reporting, and data analysis purposes. Ability to work independently and take ownership of tasks to ensure timely completion. Adaptability to changing priorities and the ability to work efficiently in a fast-paced environment. Excellent verbal and written communication skills to interact effectively with internal teams and external stakeholders. Strong collaborative skills to work cohesively within a team and contribute to achieving common goals. Education: BTEC/City guilds in Electronics. Experience: Minimum 2-3 years of electronic test equipment service experience with a good understanding of electronics. Knowledge of optical equipment is beneficial. Language Requirement: Fluent in English. If you are a self-motivated individual with a passion for delivering exceptional service, our client would love to hear from you. Apply now!
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems. As an Engineering Technician you will work as part of a precision manufacturing team testing valve?s and valve assemblies to very tight tolerances. Equipment Digital voltmeters, oscilloscopes, data acquisition. Particle counting equipment Gas flow testing of valves Electrical Testing High voltage dielectronic and insulation resistance testing Key skills Engineering Electronics Multi meter Manufacturing LabVIEW Test Equipment Six Sigma Oscilloscope Data Acquisition Soldering Aerospace LabVIEW Cleanroom
Apr 26, 2024
Full time
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems. As an Engineering Technician you will work as part of a precision manufacturing team testing valve?s and valve assemblies to very tight tolerances. Equipment Digital voltmeters, oscilloscopes, data acquisition. Particle counting equipment Gas flow testing of valves Electrical Testing High voltage dielectronic and insulation resistance testing Key skills Engineering Electronics Multi meter Manufacturing LabVIEW Test Equipment Six Sigma Oscilloscope Data Acquisition Soldering Aerospace LabVIEW Cleanroom
Job Title: Electrical Technician/Fitter Job Location: Stoke on Trent, Staffordshire Shifts: Mornings and Afternoons rotating Pay: 28.05 Umbrella / 22 PAYE Hours per week: 37 Hours per week, anything over 37 hours is time and a half Shifts: Early shift (06:00 to 14:30) and a Late shift (14:00 to 22:30) Duration: Long-term contract with possibility of permanent work in the future Start Date: Immediate Client Summary: Our client is a leader in locomotive manufacturing in the UK they specialise in maintenance and modifications of these locomotives. With decades of experience, they deliver innovative solutions for transportation networks worldwide. Their commitment to excellence and sustainability ensures they remain a trusted partner in the rail industry's evolution. Position summary: The successful candidates will be involved in intricate electrical tasks primarily focused on locomotive systems. Roles can include: Routing cables through locomotive chassis and bodywork. Renewing wiring and looms. Executing crimping operations to a high standard. Maintaining a clean and organized work environment. Undertaking a rigorous conversion program with a strong emphasis on quality and excellence. Person Profile / Experience: Proven background in electrical wiring within sectors such as Aviation, Military, Automotive, or Plant Electrical/Electronics NVQ Level 3 or equivalent in Electrical/Electrical Installation Exceptional work ethic and reliability Commitment to maintaining high standards of work Contact information: Charlie Walker - Recruitment Consultant Email: (url removed)
Apr 25, 2024
Contractor
Job Title: Electrical Technician/Fitter Job Location: Stoke on Trent, Staffordshire Shifts: Mornings and Afternoons rotating Pay: 28.05 Umbrella / 22 PAYE Hours per week: 37 Hours per week, anything over 37 hours is time and a half Shifts: Early shift (06:00 to 14:30) and a Late shift (14:00 to 22:30) Duration: Long-term contract with possibility of permanent work in the future Start Date: Immediate Client Summary: Our client is a leader in locomotive manufacturing in the UK they specialise in maintenance and modifications of these locomotives. With decades of experience, they deliver innovative solutions for transportation networks worldwide. Their commitment to excellence and sustainability ensures they remain a trusted partner in the rail industry's evolution. Position summary: The successful candidates will be involved in intricate electrical tasks primarily focused on locomotive systems. Roles can include: Routing cables through locomotive chassis and bodywork. Renewing wiring and looms. Executing crimping operations to a high standard. Maintaining a clean and organized work environment. Undertaking a rigorous conversion program with a strong emphasis on quality and excellence. Person Profile / Experience: Proven background in electrical wiring within sectors such as Aviation, Military, Automotive, or Plant Electrical/Electronics NVQ Level 3 or equivalent in Electrical/Electrical Installation Exceptional work ethic and reliability Commitment to maintaining high standards of work Contact information: Charlie Walker - Recruitment Consultant Email: (url removed)
Elevate your career as an Electronics R&D Technician with a dynamic Engineering business located in Woolpit. This role promises to be a stimulating challenge for a skilled individual eager to contribute to groundbreaking projects within a forward-thinking company.Embark on a journey where your expertise will be pivotal in the development of innovative electronic products. The company values the contribution of its staff and offers a supportive environment where creativity and technical prowess are nurtured. Enjoy a competitive salary, comprehensive benefits package, and the chance to work with cutting-edge technology in a state-of-the-art facility.The ideal candidate will possess a robust foundation in electronics, with a proven track record of success in research and development environments. A keen eye for detail and a passion for problem-solving are essential, as the role involves designing, prototyping, and testing new electronic components and systems.Key Responsibilities:- Collaborate with engineers to design and develop electronic circuits and systems.- Construct and evaluate prototypes, providing insightful feedback to enhance performance.- Conduct experiments and analyse data to support the progression of R&D projects.- Troubleshoot and resolve complex technical issues, ensuring reliability and efficiency.- Maintain accurate records of design iterations, test results, and project progress.Essential Skills & Experience:- A degree in Electronics or a related field, or equivalent practical experience.- Proficiency in the use of electronic test equipment and tools.- Strong analytical skills with a methodical approach to problem-solving.- Experience with CAD software for electronic circuit design.- Excellent communication and teamwork abilities, with a flair for innovation.This role is not just another job; it is a chance to make a significant impact in a company that is shaping the future of technology. If you have the skills and the drive to excel in this role, submit your application and join a team where your contributions will be celebrated and your professional growth guaranteed.
Apr 25, 2024
Full time
Elevate your career as an Electronics R&D Technician with a dynamic Engineering business located in Woolpit. This role promises to be a stimulating challenge for a skilled individual eager to contribute to groundbreaking projects within a forward-thinking company.Embark on a journey where your expertise will be pivotal in the development of innovative electronic products. The company values the contribution of its staff and offers a supportive environment where creativity and technical prowess are nurtured. Enjoy a competitive salary, comprehensive benefits package, and the chance to work with cutting-edge technology in a state-of-the-art facility.The ideal candidate will possess a robust foundation in electronics, with a proven track record of success in research and development environments. A keen eye for detail and a passion for problem-solving are essential, as the role involves designing, prototyping, and testing new electronic components and systems.Key Responsibilities:- Collaborate with engineers to design and develop electronic circuits and systems.- Construct and evaluate prototypes, providing insightful feedback to enhance performance.- Conduct experiments and analyse data to support the progression of R&D projects.- Troubleshoot and resolve complex technical issues, ensuring reliability and efficiency.- Maintain accurate records of design iterations, test results, and project progress.Essential Skills & Experience:- A degree in Electronics or a related field, or equivalent practical experience.- Proficiency in the use of electronic test equipment and tools.- Strong analytical skills with a methodical approach to problem-solving.- Experience with CAD software for electronic circuit design.- Excellent communication and teamwork abilities, with a flair for innovation.This role is not just another job; it is a chance to make a significant impact in a company that is shaping the future of technology. If you have the skills and the drive to excel in this role, submit your application and join a team where your contributions will be celebrated and your professional growth guaranteed.
Junior Electronics Technician Liverpool (L24) 19,000 - 25,000 + Days (8:30am to 17:00pm Mon to Thurs, 8:30am to 14:00pm Fri) + Full Training + Progression Opportunties + Company Benefits Do you have experience working with electronics? Are you looking to kick start your career at a stable and reputable manufacturer, who will invest in your skill set through excellent training opportunities? On offer is an exciting opportunity for a Technician to join a growing company in a secure working environment, where you can advance your professional development through training and progression opportunities. This company has a great reputation in the area for their staff retention and pride themselves on having a friendly, cohesive working environment that develops staff. Due to progression in the department, they are looking to increase their headcount with the addition of a driven Electronics Technician to join their team. In this role you will be tasked with assembly and disassembly of in circuit test machines, whilst also soldering, repairing and refurbishing faulty parts. Full in house training will be provided by senior engineers in order to get you up to speed on all equipment. The ideal candidate for this role would be someone with a strong interest in electronics, who has ideally studied electrical/electronic engineering at college or university, who is looking to kick start their career in electronic engineering. The Role: Junior Electronics Technician Assembly, soldering, repairing and refurbishing faulty electronic parts to be used in circuits Full in house training provided 8:30am to 17:00pm Monday to Thursday, 8:30am to 14:00pm Friday The Person: A formal qualification in Electrical/Electronic Engineering (BTEC, Degree, HNC or similar) Commutable to Liverpool (L24) Reference Number: BBBH(phone number removed) To apply for this role or for to be considered for further roles, please click "Apply Now" or contact James Robinson at Rise Technical Recruitment. This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency. Rise Technical Recruitment Ltd regrets to inform that our client can only accept applications from engineering candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
Apr 24, 2024
Full time
Junior Electronics Technician Liverpool (L24) 19,000 - 25,000 + Days (8:30am to 17:00pm Mon to Thurs, 8:30am to 14:00pm Fri) + Full Training + Progression Opportunties + Company Benefits Do you have experience working with electronics? Are you looking to kick start your career at a stable and reputable manufacturer, who will invest in your skill set through excellent training opportunities? On offer is an exciting opportunity for a Technician to join a growing company in a secure working environment, where you can advance your professional development through training and progression opportunities. This company has a great reputation in the area for their staff retention and pride themselves on having a friendly, cohesive working environment that develops staff. Due to progression in the department, they are looking to increase their headcount with the addition of a driven Electronics Technician to join their team. In this role you will be tasked with assembly and disassembly of in circuit test machines, whilst also soldering, repairing and refurbishing faulty parts. Full in house training will be provided by senior engineers in order to get you up to speed on all equipment. The ideal candidate for this role would be someone with a strong interest in electronics, who has ideally studied electrical/electronic engineering at college or university, who is looking to kick start their career in electronic engineering. The Role: Junior Electronics Technician Assembly, soldering, repairing and refurbishing faulty electronic parts to be used in circuits Full in house training provided 8:30am to 17:00pm Monday to Thursday, 8:30am to 14:00pm Friday The Person: A formal qualification in Electrical/Electronic Engineering (BTEC, Degree, HNC or similar) Commutable to Liverpool (L24) Reference Number: BBBH(phone number removed) To apply for this role or for to be considered for further roles, please click "Apply Now" or contact James Robinson at Rise Technical Recruitment. This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency. Rise Technical Recruitment Ltd regrets to inform that our client can only accept applications from engineering candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
ane are currently looking for a Technician (Wire Person) to join our client based in Surrey. Salary: 28,000 - 32,000 (Dependant on experience) Fantastic Company Benefits! You'll need: Ability to obtain UK security clearance Technical experience in manufacturing, assembly, repair, modification of electronic components or systems. Strong mechanical aptitude. Proficient with use of hand tools and test equipment. Ability to read and understand electronic and mechanical drawings. Knowledge of electronic Components. A basic understanding of electrical & electronics requirements. Competent in IPC 610 and 620 standards would be an advantage. Good at multi-tasking Computer proficient with office 365 and the ability to pick up software programmes quickly. What You'll do: Ability to solder, crimp, undertake mechanical assemblies and cable assemblies. All to be undertaken against the recognised company standards as laid down in IPC-A-610C. Surface mount experience and certification to IPC standards would be an advantage. Able to work iaw Job Cards, Production/Development drawings, Test plans, Technical instructions and Process documents. Ability to inspect component parts and identify defects prior to and during the manufacturing and assembly process. Competently inspect components and sub-assemblies in accordance with the quality standards and production schedule within the required tolerances and technical specification. Able to kit parts, hand tools and other equipment to complete assembly ensuring that all materials are correct and to standard, fitting to the required specification. Ensure looms are formed against wiring schedules to achieve the required dimensional and visual standard. Ability to obtain higher UK Security Clearance will be required for this position. If you are interested in this Wire person (Technician) opportunity please contact Sam on (url removed)
Apr 24, 2024
Full time
ane are currently looking for a Technician (Wire Person) to join our client based in Surrey. Salary: 28,000 - 32,000 (Dependant on experience) Fantastic Company Benefits! You'll need: Ability to obtain UK security clearance Technical experience in manufacturing, assembly, repair, modification of electronic components or systems. Strong mechanical aptitude. Proficient with use of hand tools and test equipment. Ability to read and understand electronic and mechanical drawings. Knowledge of electronic Components. A basic understanding of electrical & electronics requirements. Competent in IPC 610 and 620 standards would be an advantage. Good at multi-tasking Computer proficient with office 365 and the ability to pick up software programmes quickly. What You'll do: Ability to solder, crimp, undertake mechanical assemblies and cable assemblies. All to be undertaken against the recognised company standards as laid down in IPC-A-610C. Surface mount experience and certification to IPC standards would be an advantage. Able to work iaw Job Cards, Production/Development drawings, Test plans, Technical instructions and Process documents. Ability to inspect component parts and identify defects prior to and during the manufacturing and assembly process. Competently inspect components and sub-assemblies in accordance with the quality standards and production schedule within the required tolerances and technical specification. Able to kit parts, hand tools and other equipment to complete assembly ensuring that all materials are correct and to standard, fitting to the required specification. Ensure looms are formed against wiring schedules to achieve the required dimensional and visual standard. Ability to obtain higher UK Security Clearance will be required for this position. If you are interested in this Wire person (Technician) opportunity please contact Sam on (url removed)